Timex Group USA TMXM597-1 Fitness Tracker M597 User Manual Layout 1

Timex Group USA, Inc. Fitness Tracker M597 Layout 1

Instruction Guide

W243 NA193-095000-04Fitness Trackerinstruction guideEnglish Page 2Français Page 24Español Página 48
TABLE OF CONTENTSWATCH FEATURES ................................................................2Time/Date ............................................................................2Chronograph ........................................................................2Recall ....................................................................................2Timer & Interval Timer..........................................................2Activity (Pedometer) ............................................................3Calibrate ..............................................................................3Alarm ....................................................................................3WATCH MODES......................................................................3BUTTON FUNCTIONS ............................................................4STARTING THE FITNESS TRACKER SYSTEM ......................5TIME / DATE / HOURLY CHIME ............................................6CHRONOGRAPH ....................................................................7Run Chrono ..........................................................................7Customize Display Format ..................................................8RECALL....................................................................................8TIMER ......................................................................................9INTERVAL TIMER..................................................................10ACTIVITY ..............................................................................11Viewing Activity Statistics ..................................................11Setting Activity Features....................................................12CALIBRATE............................................................................12Automatic Activity Selection..............................................12Automatic POD Calibration ................................................12Manual POD Calibration ....................................................13ALARM ..................................................................................13POD Informational and Error Messages ............................14INDIGLO®NIGHT-LIGHT / NIGHT-MODE®FEATURE ..........14WATER & SHOCK RESISTANCE ..........................................15BATTERIES ............................................................................16WARRANTY ..........................................................................19INTRODUCTIONWelcome!Thank you for purchasing a TIMEX® Ironman* FitnessTracker with INDIGLO® night-light. Together, the watch andfitness POD are a great way to enhance your training experi-ence and help you keep active.The watch stores 50 laps and incorporates basic speed anddistance tracking technology to help you stay on pace or tojust keep track of how active you have been.So, if you are staying active for health reasons, starting ajogging regimen or training for your 10th marathon, thiswatch will help you along your way.Please read instructions carefully to understand how tooperate your Timex® watch. Your model may not haveall of the features described in this booklet.Register your product at www.timex.com
• Pedometer speed, distance and pace can be shownACTIVITY (PEDOMETER)• Step counter from 0 to 999,999• Traveled distance either in miles or kilometers• Elapsed time during activity• Calories burned• Speed calculation based on step count, activity time and stride length• Walk rate calculation in steps/min• Weight and stride input• Settable target step goal• Units settable to US or MetricCALIBRATE• Calibration settings for walking, running and jogging• Settable stride length, step rate and calibration distance• Automatic activity detection for accurate calorie anddistance calculationALARM• Three daily, weekday, weekend, or weekly alarms• Five-minute backup alert• INDIGLO® night-light flashes during alertINDIGLO® NIGHT-LIGHT WITH NIGHT-MODE® FEATUREWATCH MODESThe features of this watch are grouped into modes that areaccessible by pressing and releasing the MODE button –each depression of the MODE button takes you to the nextmode in the loop. The modes are arranged in the followingorder:TIME > CHRONO > RECALL > TIMER > INT TIMER > ACTIVITY>CALIBRATE > ALARMWATCH FEATURESTIME/DATE• Hours, minutes, and seconds displayed in 12- or 24-hourformat• Day of week and date displayed in MM-DD or DD.MMformat• Second time zone, with independent hours, minutes,date, and format settings• Optional button beep and hourly chime• Peek to time of day from any mode by holding MODEbutton• Pedometer speed, distance and pace can be shown• Press and hold START/SPLIT briefly to peek at thesecond Time Zone. Continue to hold to change to secondtime zone. Watch will beep to confirm changeCHRONOGRAPH•1/100-second resolution up to one hour; one-secondresolution up to 100 hours• 99-lap count• Pedometer speed, distance and pace can be shownRECALL• Storage for 50 laps• Multiple workout storage with date stamp, average and best lap times as well as total distance, speed,and pace per lap • Average calories for entire workoutTIMER & INTERVAL TIMER• Timer settable up to 24 hours• Five intervals settable up to 24 hours• Count down and stop or repeat• 99-rep count• INDIGLO® night-light flashes during alert• Intervals can be named with one of six canned messages23
STARTING THE FITNESS TRACKER SYSTEM1. To turn on the POD, slide the switch to the ON position.2. Clip the POD to your waistband or belt. Make sure thePOD is on the hip and parallel to the ground. For bestresults, place the POD on the same side of your body asyour watch.3. To turn the receiver on, press the ON/OFF button on thewatch. Make sure you are at least 6 feet away fromother Fitness Tracker users.4. The wave on the ANTENNA icon vblinks while thewatch looks for the POD.5. ANTENNA icon Vis shown steady when the POD andwatch are communicating and successfully linked.NOTE: Though the Fitness Tracker system has a workingrange of about 3 feet (1 meter) from the POD to the watch,for the most reliable operation, make sure that the watch isas close to the POD as possible when starting the system.TIPS:•As a convenience, when entering any timing or activitymode, the watch will automatically start looking for thePOD without having to press the ON/OFF button on thewatch.• To turn off the system, press and hold ON/OFF on thewatch for 4 seconds. Slide the POD switch to OFF to turnoff the POD.• To increase battery life, make sure you turn the POD andwatch receiver off when not in use.5TIME Displays the time of day and dateCHRONO Use the chronograph for timing purposesRECALL Use to review previous chronograph timedeventsTIMER The Countdown Timer is useful for timing fixed-time eventsINT TIMER The Interval Timer is great for timing fixedintervals during workoutsACTIVITY Use Activity mode to track steps, activity goalsand calories burnedCALIBRATE Calibrate mode is used to setup the fitness PODand make it very accurateALARM Three alarms are available to keep you on timeBUTTON FUNCTIONSWhen setting, each button has a different function asindicated above. Display indicates when button changesfunction.4SETON/OFFSTOP/RESETINDIGLO®MODESTART/SPLITON/OFF
CHRONOGRAPHWatch counts up to 99 laps (100 hours max.) and stores 50 laps.Lap time is the time for one segment (lap) of an event. Splittime is the total time since the start of the event.RUN CHRONO:1. Press MODE until CHRONO appears.2. Press START/SPLIT to start Chrono. Chrono continues torun if you exit the mode.3. Press START/SPLIT to take a split. Lap number isdisplayed in upper left of display.4. Display will freeze for 10 seconds. If POD is active, after 5seconds the average pace and total distance for thelap are shown. Press MODE to release display and seerunning chrono.5. Press STOP/RESET to stop or pause Chrono. PressSTART/SPLIT to resume.6. When workout is completed, you have two options:Press and hold SET to store workout or press and holdSTOP/RESET to clear workout (both reset chrono to00:00:00).7. While the POD and watch are communicating, press theON button repeatedly to step through distance, speed,pace and chronograph displays.TIPS:• When Chrono is running, wappears in Time display.7• For best results, make sure POD is directly over the hipon the side of your body. Moving the POD closer to thefront or rear of your body will decrease accuracy.ING From Time of Day, Chrono, Timer or Interval Timer modes,repeatedly press the ON/OFF button to cycle throughdistance, speed, pace and mode data. Each mode retains its view settings.TIME / DATE / HOURLY CHIME1. In TIME mode, press and hold SET. Time Zone flashes.2. Press +or – to select Time Zone 1 or 2.3. Press NEXT to set hour. Digits flash.4. Press +or – to change hour. Scroll through 12 hours tochange to AM/PM.5. Press NEXT and +/–to set minutes.6. Press NEXT and +/–to set seconds to zero.7. Continue pattern to set day of week, month, day,12-hour (AM/PM) or 24-hour military time format,MM-DD or DD.MM date format, turn hourly Chime on/offand turn Beep on/off. If you select Beep on, beep willsound every time you push a button except theINDIGLO® button.8. Press NEXT to set second Time Zone, followingprocedure above.9. Press DONE to exit.10. While the POD and watch are communicating, press theON button repeatedly to step through distance, speed,pace and date displays.TIPS:•While viewing time, press and hold START/SPLIT brieflyto peek at second Time Zone.• Press and hold START/SPLIT for 4 seconds to changeTime Zone displayed.• In other modes, press and hold MODE to view Time,release to return to current mode.6
5. Press SET to exit lap review.Statistics that may be reviewed are the following:Total Time – Total time of the workoutDistance – Total distance of the workoutAverage Speed – Average speed achieved for the entireworkoutPace – Average pace achieved for the entire workoutCalories – Total calories burned during the workoutLap Time – Lap and split time for each lap takenLap Distance – Total distance accumulated for the lapLap Speed – Average speed of the lapLap Pace – Average pace of the lapBest Lap – The fastest lap in terms of time for the workoutAverage Lap – The average lap time for the workoutTIPS:To delete workout, press and hold STOP/RESET for 3 sec-onds. Continue to hold for 3 more seconds to delete allworkouts.TIMERThe Timer is used to countdown a fixed event time. Thetimer can be set to repeat and countdown continuously.1. Press MODE until TIMER appears.2. Press SET. Hour digits flash.3. Press + / – to change hour.4. Press NEXT and +/–to set minutes.5. Press NEXT and +/–to set seconds.6. Press NEXT and +/–to select STOP AT END or REPEATAT END.7. Press DONE to confirm and exit.8. Press START/SPLIT to start Timer.Timer will continue torun if you exit Timer mode.9• When storing a workout, display will indicate availablefree memory (number of laps remaining to be stored).Each workout stored equals number of laps taken plusone extra lap to store total workout times or MEMORYFULL.• If there is insufficient memory to store entire workout,total time, date, and oldest laps will be stored up toremaining capacity.• To clear the last chronograph workout, hold STOP/RESETwhile the chrono is reset. To clear all workouts, continueto hold the STOP/RESET button until CLEAR CHRONOMEM is shown and the watch beeps.CUSTOMIZE DISPLAY FORMAT:This determines what is shown on top and bottom lines ofthe display when chrono is running.1. Press SET.2. Press +/–to select LAP/SPLIT (Lap in large digits),SPLIT/LAP (Split in large digits), or TOTAL RUN.3. Press SET to exit.NOTE: TOTAL RUN format allows you to view total elapsedtime and total activity time (total activity time=total elapsedtime – time paused during workout).RECALLRecall mode is used to review workouts timed in thechronograph mode. Recall shows the laps taken during aworkout, the best lap in the workout and calculates theaverage lap time for the workout.If the pedometer is active, recall also shows total distance,average speed, average pace and calories for the workoutas well as lap times, lap distance, lap speed and lap pace.1. Press MODE until RECALL appears.2. Press +to select workout to review.3. Press SET to enter lap review.4. Press +/–to review all statistics for the workout.8
9. The timer melody chimes when Timer reaches zero orbefore it starts to countdown again.10. Press STOP/RESET to stop Timer. Hold STOP/RESET for2seconds to reset.11. While the POD and watch are communicating, press theON button repeatedly to step through distance, speed,pace and timer displays.TIPS:•Happears in Time display when Timer is running. jappears when timer is running and set to repeat at end.• For repeat Timer operation, repetition number appearson top of display.• Maximum number of repeats is 99.INTERVAL TIMERInterval timers are timers that count down a series of fixedevents. You can set up to 5 interval times along withdescriptive names.1. Press MODE until INT TIMER appears.2. Press SET. 1 flashes.3. Press +/–to select interval (1 through 5).4. Press NEXT.Hour digits flash.5. Press +/–to change hour.6. Press NEXT and +/–to set minutes.7. Press NEXT and +/–to set seconds.8. Press NEXT and +/–to select interval name (SLOW,MED, FAST, WALK, JOG or RUN).9. Press NEXT and +/–to select STOP AT END or REPEATAT END.10. Press DONE to confirm and exit.11. Press START/SPLIT to start Timer. Other operations arethe same as for TIMER.12. While the POD and watch are communicating, press theON button repeatedly to step through distance,speed,pace and interval timer displays.TIPS:•Happears in Time display when Interval Timer is running.jappears when interval timer is running and set torepeat at end.• When first countdown is complete, Timer proceeds to thenext non-zero interval that is set. INDIGLO® night-lightflashes and beep sounds between each interval.• If you select REPEAT AT END, Timer will countdown allintervals and then repeat entire sequence.• Take advantage of interval names. Names make type ofactivity for the interval easy to remember.ACTIVITYThe Activity mode tracks how active you are and sets stepgoals.1. Make sure the POD is on and the watch is receiving.2. Press MODE until ACTIVITY appears.3. Press +to move through the different statisticsVIEWING ACTIVITY STATISTICSIn Activity mode, the available statistical information to viewincludes the following:Steps – Total number of steps takenDistance – Total distance traveled (miles or km)Activity Time – Total time spent movingCalories – Total calories burnedSpeed – Current speed (mph or km/h”)Pace – Current pace (hours and minutes per mile or km)Steps Left – Total steps remaining from step goalSteps per Minute – Average of the last 6 stepsTIPS:• Hold STOP/RESET while in Activity mode to reset Activitystatistics.1110
3. Press ON/OFF to turn on watch receiver if not alreadyon. Wait for steady ANTENNA icon Vbefore continuingcalibration.4. Press +to select activity to calibrate.5. Hold ON/OFF button to start calibration. Wait for STARTWALK, START JOG or START RUN to display on the watch.6. Start the current activity. For example, if RUN is selected,start to run.7. At the end of 100 ft (or 30 meters), press STOP/RESET tocomplete calibration.8. If calibration was successful, CALIBRATE OK is shown onwatch.NOTE: CALIBRATE FAILED may be shown when there are toofew steps over long period of calibration time or too manysteps over short period of calibration time.TIPS:• You may manually calibrate the stride length and stepsper minute to get better accuracy.•Additionally, you may get better accuracy by choosing alonger distance for calibration.MANUAL POD CALIBRATIONManual POD calibration can be used to get incrediblyaccurate calibration. Values can be tweaked to achieve ahigh level of accuracy.1. Make sure the POD is turned ON.2. Press MODE until CALIBRATE appears.3. Hold SET to calibrate selected activity.4.Press +/–to select the activity to calibrate (WALK, JOGor RUN).5. Press NEXT and + / – to set each of the Steps perMinute digits.6.Press NEXT and + / – to set the stride length.7. Press NEXT and + / – to set the calibration length forautomatic calibration.13• When your step goal has been reached, GOAL MET isshown and a tone sounds within any mode.SETTING ACTIVITY FEATURESIn Activity mode, you can set up a step goal, your weightand the units (US or metric) for all watch functions.1. Press MODE until ACTIVITY appears.2. Press and hold SET. Step Goal digit flashes.3. Press NEXT and +/–to set each of the next Step Goaldigits.4. Press NEXT and +/–to set each of the weight digits.5. Press NEXT and +/–to select US or Metric units.6. Press DONE to confirm and exit.CALIBRATEThe Calibrate mode is used to set up the POD to be moreaccurate in calculating things such as distance and caloriesconsumed.AUTOMATIC ACTIVITY SELECTIONOnce calibrated for walking, jogging, and running, theFitness Tracker is smart enough to determine which activityyou are performing. This results in more accurate statisticsoverall.NOTE: Please calibrate all activities before using toensure product accuracy. If not all activities are calibrated,please go through manual calibration and copy the step rateand stride length values from one activity to those that havenot been calibrated.AUTOMATIC POD CALIBRATIONAutomatic POD calibration is a great way to easily calibratethe POD without having to know any details about the stridelength and the step rate. Minimum distance for calibration is100 feet (or 30 meters).1. Make sure the POD is turned ON.2. Press MODE until CALIBRATE appears.12
INDIGLO®NIGHT-LIGHT / NIGHT-MODE®FEATURE1. Press INDIGLO® button to activate night-light. INDIGLO®technology illuminates entire watch face at night and inlow light conditions.2. Continue to press up to 3 seconds to maintain illumina-tion.3. Press and hold INDIGLO® button for 4 seconds toactivate NIGHT-MODE® feature (U.S. pat. 4,912,688).4. When NIGHT-MODE® feature is activated, push anybutton to illuminate watch face for 3 seconds.5. To deactivate NIGHT-MODE® feature, press INDIGLO®button for 4 seconds. Feature will automaticallydeactivate.WWATER & SHOCK RESISTANCEIf your watch is water-resistant, meter marking or (O)isindicated.*pounds per square inch absoluteWARNING: TO MAINTAIN WATER-RESISTANCE, DO NOTPRESS ANY BUTTONS UNDER WATER.1. Watch is water-resistant only as long as lens, pushbuttons and case remain intact.2. Watch is not a diver watch and should not be used fordiving.3. Rinse watch with fresh water after exposure to saltwater.4. Shock-resistance will be indicated on watch face or case-15ALARMUp to three alarms may be set to remind you of upcomingevents.1. Press MODE until ALARM appears.2. Press START/SPLIT to select alarm 1, 2, or 3.3. Press SET to set selected alarm.4. Hour digits flash. Press +/–to change hour.5. Press NEXT and +/–to set minutes, AM or PM (ifprimary time display is in 12-hour format), DAILY, WEEK-DAYS, WEEKENDS, or day of the week (weekly alarm).6. Press DONE to confirm and exit.7. Press STOP/RESET to turn Alarm ON or OFF.TIPS:• When Alarm is on, dappears in Time display.• When Alarm sounds., INDIGLO® night-light and alarmicon flash and alert sounds. Press any button to silence.• If no button is pushed, alert will cease after 20 secondsand Backup Alarm will activate after 5 minutes.POD INFORMATIONAL AND ERROR MESSAGESBlinking antenna icon v–The watch is currently searchingfor the POD when the wave is blinking. Make sure the PODis on and within range of the watch.Steady antenna icon V–The watch and the POD are com-municatingSteady jogger icon o–There is no movement detected Moving jogger icon n–Movement has been detected by thePOD and the data is being transmitted to the watchNO POD DATA – The POD signal was lost. Make sure thePOD is powered on and within range. The watch automati-cally powers off after 16 hours of continuous use. At thatpoint, the watch receiver must be turned on again bypressing ON/OFF.14Water-Resistance Depth p.s.i.a. * Water Pressure Below Surface30m/98ft 6050m/164ft 86100m/328ft 160
FCC Notice (U.S.) / IC Notice (Canada):This device complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.Warning: Changes or modifications not expressly approved bythe party responsible for compliance could void the user'sauthority to operate the equipment.NOTE: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonable pro-tection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communi-cations. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more ofthe following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician forhelp.This Class [B] digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe [B] est conforme à la normeNMB-003 du Canada.17back. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoiddamaging crystal/lens.BATTERIESCHANGING THE WATCH BATTERY1. Using a coin, insert the coin into the slot on the batteryhatch.2. Unscrew the battery hatch by turning the coin counter-clockwise.3. Remove plastic frame covering battery.4. Remove battery from watch.5. Peel off mylar sticker from old battery and place on newbattery.6. Insert new battery into watch case.7. Replace plastic frame covering battery.8. Replace battery hatch.9. Using a coin, turn the battery hatch clockwise to close.DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE.KEEP LOOSE BATTERIES AWAY FROM CHILDREN.CHANGING THE POD BATTERY1. Simultaneously push the button on the case back andslide the cover away from the POD.2. Remove the old battery and insert a new CR2032 batteryinto the battery compartment.3. Reinstall the battery hatch.16
EXTENDED WARRANTYAvailable in U.S. only. Extend your warranty for an additional 4 years from dateof purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by call-ing 1 800-448-4639 during normal business hours. Payment must be made with-in 30 days of purchase. Name, address, telephone number, purchase date, and5-digit model number required. You can also mail a check for $5 to: TimexExtended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.TIMEX INTERNATIONAL WARRANTYYour TIMEX® watch is warranted against manufacturing defects by TimexCorporation for a period of ONE YEAR from the original purchase date. Timexand its worldwide affiliates will honor this International Warranty.Please note that Timex may, at its option, repair your watch by installing new orthoroughly reconditioned and inspected components or replace it with an iden-tical or similar model. IMPORTANT — PLEASE NOTE THAT THIS WARRANTYDOES NOT COVER DEFECTS OR DAMAGES TO YOUR WATCH:1) after the warranty period expires;2) if the watch was not originally purchased from an authorized Timexretailer;3) from repair services not performed by Timex;4) from accidents, tampering or abuse; and5) lens or crystal, strap or band, watch case, attachments or battery. Timexmay charge you for replacing any of these parts.THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND INLIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.TIMEX IS NOTLIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAM-AGES. Some countries and states do not allow limitations on implied warrantiesand do not allow exclusions or limitations on damages,so these limitations maynot apply to you. This warranty gives you specific legal rights and you may alsohave other rights which vary from country to country and state to state.Toobtain warranty service,please return your watch to Timex, one of its affiliatesor the Timex retailer where the watch was purchased, together with a completedoriginal Watch Repair Coupon or, in the U.S. and Canada only, the completed orig-inal Watch Repair Coupon or a written statement identifying your name, address,telephone number and date and place of purchase.Please include the followingwith your watch to cover postage and handling (this is not a repair charge): a US$ 8.00 check or money order in the U.S.; a CAN$7.00 cheque or money order inCanada; and a UK£2.50 cheque or money order in the U.K. In other countries,Timex will charge you for postage and handling. NEVER INCLUDE A SPECIALWATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN YOUR SHIPMENT.For the U.S., please call 1-800-328-2677 for additional warranty information. ForCanada, call 1-800-263-0981. For Brazil, call +55 (11) 5572 9733. For Mexico, call01-800-01-060-00. For Central America, the Caribbean, Bermuda and theBahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the U.K.,call 44 020 8687 9620. For Portugal, call 351 212 946 017. For France, call 33 3 81 63 42 00. For Germany,call 49 7 231 494140. For the Middle East andAfrica, call 971-4-310850. For other areas, please contact your local Timex19DECLARATION OF CONFORMITYManufacturer: Timex Corporation555 Christian RoadMiddlebury, CT USA 06762declares that the product:Product Name: Fitness TrackerModel Number: M597conforms to the following Product Specifications:R&TTE: 1999/05/ECStandards: ETSI EN 300 330-1 - V1.3.1 (EMC) & (ERM) ETSI EN 300 330-2 - V1.1.1 (EMC) & (ERM)LVD: 73/23/EECStandards: CENELEC EN 60950-1EMC: 89/336/EECStandards: CENELEC EN 55022:1998CENELEC EN 55024-1998EN 61000-4-2 - ESDEN 61000-4-3 - RF Radiated ImmunityEN 61000-4-8 - MagneticsSupplemental Information: The product herewith complies with therequirements of the Radio & Telecommunications Terminal EquipmentDirective 1999/05/EC, the Low Voltage Directive 73/23/EEC, and theEMC Directive 89/336/EEC and carries the 7marking accordingly.Agent:Brian J.HudsonDirector, Test Engineering and Module DevelopmentDate: 01 January, 2007, Middlebury, Connecticut, U.S.A.18
21retailer or Timex distributor for warranty information. In Canada, the U.S. and incertain other locations, participating Timex retailers can provide you with apostage-paid, pre-addressed Watch Repair Mailer for your convenience inobtaining factory service.©2008 Timex Corporation. TIMEX and NIGHT-MODE are registered trademarks ofTimex Corporation. INDIGLO is a registered trademarks of Indiglo Corporation inthe US. and other countries. *IRONMAN is a registered trademark of WorldTriathlon Corporation.20

Navigation menu