Timex Clock 75071T Users Manual

75071T to the manual 287efe72-ddaa-4992-b414-4b120df65263

: Timex Timex-Timex-Clock-75071T-Users-Manual-300171 timex-timex-clock-75071t-users-manual-300171 timex pdf

Open the PDF directly: View PDF .
Page Count: 2

1 • OVERVIEW OF FEATURES

INST - 75071T 120210

USER GUIDE

Package Contents:

(1) Digital Clock

(1) User Guide

What You’ll Need:

(4) AA Batteries

Intelli-Time® Digital Clock

with extra large LCD

#75071T

Thank You for purchasing this TIMEX® product. This digital clock features Intelli-Time®

technology, which instantly sets the clock once the batteries are in. Please read this

manual in its entirety to fully enjoy the benets and features of this product. Please keep

this manual for future reference.

NOTE: A protective plastic case is placed over the display at the factory that must be

removed prior to using this product.

LIMITED ONE YEAR WARRANTY

Chaney Instrument Company warrants that all products it manufactures to be of good material and

workmanship and to be free of defects if properly installed and operated for a period of one year from date of

purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT

OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty

contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option,

be repaired or replaced by Chaney. In all cases, transporation costs and charges for returned goods shall

be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and

charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures

which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed,

damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE

IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR

PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL

DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF HTIS WARRANT. SOME

STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL

LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY

ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY

FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION

IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS

PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE

THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND

SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For in-warranty repair, please contact:

Customer Care Department

Chaney Instrument Company

965 Wells Street

Lake Geneva, WI 53147

PATENT PENDING

Chaney Customer Care

877-221-1252

Mon-Fri 8:00 a.m. to 4:30 p.m. CST

www.chaneyinstrument.com

Please DO NOT return product to the retail store.

For technical assistance and product return information, please call

Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)

www.chaneyinstrument.com

Fold -Out Stand

Battery

compartment

BACK OF CLOCK

Reset

Time Zone

Adjust

DOWN

Adjust

UP

Fold-Out Stand

Time Zone

AM/PM indicator

-4- -1-

Set

DST Selection

Switch

Timex® is a registered trademark of Timex Corporation in the U.S. and other countries.

Indiglo® is a registered trademark of Indiglo Corporation in the U.S. and other countries.

Manufactured and serviced by

Chaney Instrument Co.

Lake Geneva, WI 53147

www.chaneyinstrument.com

© 2010 Chaney Instrument Co.

INST - 75071T 120210

About Intelli-Time®

Your new digital clock is equipped with Intelli-Time® technology which is pre-programmed

with the correct time and date. Intelli-Time® instructs the clock to set itself once batteries are

installed. The Intelli-Time® feature requires an internal memory battery to operate correctly.

This battery is located in the Intelli-Time® memory battery compartment on the back of the

clock and is pre-installed at the factory. We suggest replacement of the backup battery every

5 years. We recommend the replacement of backup battery in 1-2 years if the unit is not

powered on for a long period of time. Do not replace the memory battery unless the clock is

powered and the display is operating with the correct time.

BATTERY INSTALLATION:

Setting the time zone and daylight saving time:

1. Press, then release the “TIME ZONE” button on the back of the digital clock until it

reaches the desired time zone position. You will see the time zone on the front of the clock

in the upper right hand corner.

TIME ZONES

AST: Atlantic

EST: Eastern

CST: Central

2. You must also determine which Daylight Saving time setting to use on the back of the

unit; new or old. Due to possible future changes in DST, this unit is equipped with a

selection switch to choose between the traditional DST setting (OLD) or the new DST time

change dates. You may slide the button to the left for (OLD), middle for (NEW) or right

for (OFF). “DAYLIGHT ST” will appear on the screen when Daylight Saving Time is observed.

-2- -3-

2 • SETUP Optional Custom Time Setting:

If you wish to set the clock slightly ahead or slightly behind, or if the Intelli-Time® internal

memory battery is allowed to go dead, you may set the time and date by simply following

the custom setup procedure below:

1. Press and hold the “SET” button for 5 seconds then release to enter the manual time set mode.

2. The hour will be flashing, adjust up or down using the “UP” or “DOWN” buttons.

Note the AM or PM indicator on the display.

3. Press and release the “SET” button once to move on to the minute setting mode.

4. The minute will be flashing, adjust up or down using the “UP” or “DOWN” buttons.

5. Press and release the “SET” button once to move on to the month setting mode.

6. The month will be flashing, adjust up or down using the “UP” or “DOWN” buttons.

7. Press and release the “SET” button once to move on to the day setting mode.

8. The day will be flashing, adjust up or down using the ”UP” or “DOWN” buttons.

9. Press and release the “SET” button once to move on to the year setting mode.

10. The year will be flashing, adjust up or down using the “UP” or “DOWN” buttons.

11. Press and release the “SET” button again to exit the manual set mode.

To view the MONTH/DAY/YEAR at any time press and release the “SET” button.

The following chart illustrates the differences between the auto DST settings and when

each setting automatically changes the time during the year.

AUTO DST NOTE: portions of the country do not observe daylight savings time. If you live in

an area that does not observe daylight saving time, please turn off DST function.

NEW DST OLD DST OFF

2007 and beyond 2006 NO DST

2:00 am 2nd Sunday in March 2:00 am 1st Sunday in April changes

2:00 am 1st Sunday n November 2:00am last Sunday in October

Changing the Backup Battery

Do not change the backup batteries unless the main 4 “AA” batteries are working. This

will prevent the clock from being without power, and the internal calendar memory will

function properly.

When changing the backup batteries, remove the battery compartment cover on the back of

the unit. The backup battery compartment is inside. Open the backup battery cover. Replace

the 1 “3V” CR2032 lithium battery with a fresh one and replace the cover.

3

REMOVE

BATTERY

COMPARTMENT

COVER

1INSTALL 4 “AA”

ALKALINE

BATTERIES

2

BACKUP

BATTERY

COMPARTMENT

INITIAL SETUP: Once the batteries are installed, the clock will power up. The

clock will set itself to the correct time and date, defaulting to EST (eastern

standard time).

3 • TROUBLESHOOTING

During shipping a static charge may build up. It will NOT damage the product but may

prevent the display from showing. To restore the display you need to reset the unit. To

do this, simply look at the back of the clock. You will see a small hole that is the RESET

button. Use the end of a paper clip to press the button. This will restore the display.

MST: Mountain

PST: Pacific

AKST: Alaska

HAST: Hawaii-Aleutian