Timex Clock T020 Users Manual T 020 IB 042209_v1
T020 to the manual d9acaa2b-d3a2-4075-b401-ac0aed00884e
2015-01-23
: Timex Timex-Timex-Clock-T020-Users-Manual-300180 timex-timex-clock-t020-users-manual-300180 timex pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display. MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display. MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display. MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display. MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display. MODEL: T-020 (FRONT) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Care and Maintenance If you notice that the time display is beginning to fade, or if it has completely disappeared, replace the batteries. Replace both batteries at the same time and do not mix different types of batteries. Do not leave exhausted batteries in the clock for a long period of time. They may eventually leak and cause damage to the clock itself or to the surface the clock is placed on. Please dispose of the exhausted batteries properly. Note: After replacing the batteries the clock will return to its original default settings. It will be necessary to reset the time and alarm settings. MODEL: T-020 (Rear) INSTRUCTION MANUAL SCALE: 360W x 174H mm DATE: April 22, 2009 COLOR: WHITE BACKGROUND PRINTING BLACK Model T020 Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service after the warranty period or without proof of purchase is $6.00. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. 3. Enclose a check or money order payable to the order of Soundesign, for the sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase). 4. Send the unit prepaid to the Factory Service Center listed below: Consumer Repair Department SDI Technologies Inc. Timex Audio Products Division 1330 Goodyear Dr. El Paso, TX 79936-6420 Alarm Clock with Month / Date / Day Display T020-042209-A Preparation for Use Installing the Batteries Open the Battery Compartment cover by pressing down on the locking tab. Insert 2 “AA” batteries (not included) in the battery compartment. Be sure to insert the batteries according to the polarity markings ( “+” / “−“) inside the battery compartment. If the batteries are inserted incorrectly the unit will not work. We recommend you use a well-known brand of alkaline batteries for longest life and best performance. Snooze/Light Button Snooze/Alarm On/Off Button Mode/Set Button UP / 12/24 Button MODE Button – Used to switch between time and alarm time display modes, and to enter manual time and alarm setting modes. /12/24 Button - Used to switch the time display between 12-hour and 24-hour formats. Also used to manually advance the time, year, month, and date displays. Button – Used to manually ‘back-up’ the time, year, month, and date displays. Snooze/Alarm On/Off Button – Use to activate or deactivate the alarm and activate or deactivate the Snooze function. Thank you for purchasing this Timex model T020 Alarm Clock. Please read this instruction manual carefully and completely to insure that you understand the proper operation of your new alarm clock, and that you get the maximum benefit from all the advanced features included in this model. Printed in China For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. Alarm Time Indicator Alarm Indicator Month / Date Indicator 24 Hour Indicator Day Indicator Time Display Snooze Indicator Seconds Indicator Setting The Time / Year / Month and Date After you have selected the 12 or 24-Hour display format, proceed as follows: 1. Press and hold the MODE button for two seconds until the Hour digits begin flashing, then press either the or buttons to set the display to the correct hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 2. When the correct hour appears press the MODE button once to start the Minute or buttons to set the display to the digits flashing, then press either the correct minute. 3. When the correct minutes appear press the MODE button once to start the Seconds digits flashing. If you want to set the seconds counter to “00” press either the or button once. If you do not wish to ‘zero’ the seconds, proceed to step 4. 4. Press the MODE button once more to start the Year display flashing. The default year is 2004. Press the button to set the display to the correct year. 5. Press the MODE button once more to start the Month display flashing, then press or buttons to set the display to the correct month. either the 6. Press the MODE button once more to start the Date display flashing, then press or buttons to set the display to the correct date. Note that the either the Day of the Week indicator changes automatically as you adjust the Date display. 7. After you have completed these adjustments you may press the MODE button once more to exit the setting mode and return to the current time display. Or if you do nothing the display will return to the current time automatically after 15 seconds. Note: You must complete each of the above steps and move to the next step within 15 seconds. If you do not make any adjustment within 15 seconds the clock will exit the setting mode and return to the previously displayed information. You must then start with Step 1 again and make sure you complete each step within 15 seconds, while the display is flashing. Time Display PM Indicator Selecting 12-Hour or 24-Hour Display Mode Press the button momentarily to switch the display between the 12-Hour and 24-Hour format. If you select the 24-Hour format the “24H” indicator will appear in the display. In the 24-Hour format midnight is displayed as “0:00”, 1 PM is displayed as “13:00”, 6 PM is displayed as “18:00”, etc. The 24-Hour format is often referred to as Military Time. In the 12-Hour format midnight is displayed as “12:00”. Noon is displayed as “PM 12:00”. If the “PM” indicator does not appear, the time displayed is AM. There is no AM indicator. Snooze Bar – When Snooze function is activated, press to stop alarm temporarily. After 5 minutes alarm turns ‘On’ again. Snooze operation can be repeated up to 8 times. If snooze is not activated, pressing Snooze Bar resets alarm to following day. During normal operation, pressing the Snooze Bar also turns on the display backlighting momentarily for nighttime viewing. After 5 seconds the lighting turns off automatically. Setting the Clock Down Button Setting the Alarm Time 1. When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode. 2. While the display is in the alarm-setting mode press and hold the MODE button for or two seconds until the Alarm Hour digits begin flashing, then press either the buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM. 3. When the desired wake up hour appears press the MODE button once to start the or buttons to set the display Minute digits flashing, then press either the to the desired wake-up minute. 4. When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically. 5. If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically. Operating Instructions Controls and Their Functions NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TIMEX is a registered trademark of Timex Corporation the United States and other countries. Controls Activating The Alarm and Snooze Functions To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display. To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display. At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day. To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day. Snooze Function If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation. Deactivating The Alarm and Snooze Functions To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display.
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Format : application/pdf Title : T 020 IB 042209_v1 Creator Tool : Adobe Illustrator CS3 Create Date : 2009:12:07 09:37:53-05:00 Modify Date : 2009:12:07 10:20:27-05:00 Metadata Date : 2009:12:07 10:20:27-05:00 Thumbnail Width : 256 Thumbnail Height : 80 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8566 bytes, use -b option to extract) Document ID : uuid:731AFD5AA4E4DE11A556B768BCA0FE61 Instance ID : uuid:aa407190-a1c6-ed49-a9c1-efa85eccbafc Derived From Instance ID : uuid:21d6586f-12db-8941-9d25-b98f151fd6e2 Derived From Document ID : uuid:63A571041A24DE119043CA9FFCF6CE1A N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 839.999976 Max Page Size H : 297.000002 Max Page Size Unit : Millimeters Font Name : Myriad-Roman, Wingdings3, Webdings, TimesNewRomanPSMT, HelveticaNeue-Black, HelveticaNeue-HeavyItalic, HelveticaNeue-Heavy, HelveticaNeue-Bold, HelveticaNeue-Medium, HelveticaNeue-Light Font Family : Myriad, Wingdings 3, Webdings, Times New Roman, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue Font Face : Roman, Regular, Regular, Regular, 95 Black, 86 Heavy Italic, 85 Heavy, 75 Bold, 65 Medium, 45 Light Font Type : Type 1, TrueType, Open Type, Open Type, Type 1, Type 1, Type 1, Type 1, Type 1, Type 1 Font Version : 001.000, Version 1.10, Version 5.00x, Version 3.05, 001.000, 001.100, 001.000, 001.100, 001.000, 001.000 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : MyriaRom; Myriad Roman, Wingdings 3, Webdings.TTF, Times New Roman, HelveNeuBla; HelveticaNeue Black, HelveNeuHeaIta; HelveticaNeue Medium, HelveNeuHea; HelveticaNeue Medium, HelveNeuBol; HelveticaNeue Roman, HelveNeuMed; HelveticaNeue Medium, HelveNeuLig; HelveticaNeue Light Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : C=0 M=0 Y=0 K=0, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=75, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=45, C=0 M=0 Y=0 K=30, C=10 M=23 Y=33 K=0, C=16 M=37 Y=58 K=0, C=32 M=48 Y=76 K=20, C=43 M=52 Y=80 K=38, C=25 M=100 Y=100 K=25, C=25 M=100 Y=100 K=0, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=50 Y=100 K=0, C=0 M=25 Y=100 K=0, C=0 M=0 Y=100 K=0, C=25 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=50 M=0 Y=100 K=25, C=75 M=0 Y=100 K=25, C=100 M=25 Y=100 K=25, C=100 M=25 Y=50 K=25, C=100 M=25 Y=25 K=0, C=100 M=0 Y=0 K=0, C=100 M=25 Y=0 K=0, C=100 M=50 Y=0 K=0, C=100 M=75 Y=0 K=0, C=100 M=100 Y=0 K=0, C=75 M=75 Y=0 K=0, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=25 M=100 Y=0 K=0, C=0 M=100 Y=0 K=0, Global Color 4, Global Color, Global Color 6, Global Color 7, Global Color 5, Global Color 2, Global Color 10, Global Color 11, Black, ∞◊…´, 0c 0m 0y 65k, Global Color 8, Global Color 1, Global Color 3, Global Color 9 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 15.999996, 32.000000, 42.999996, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 50.000000, 50.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 75.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000000, 100.000000, 100.000000, 0.000000, 92.941200, 92.941200, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 92.941200 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 23.000002, 37.000000, 48.000000, 52.000000, 100.000000, 100.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 0.000000, 25.000000, 50.000000, 75.000000, 100.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 0.000000, 0.000000, 0.000000, 100.000000, 0.000000, 87.843102, 87.843102, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 87.843102 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 33.000000, 58.000000, 76.000000, 80.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 89.019600, 89.019600, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 89.019600 Swatch Colorant Black : 0.000000, 100.000000, 75.000000, 60.000004, 45.000000, 30.000002, 0.000000, 0.000000, 19.999998, 38.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000000, 80.000000, 0.000000, 65.000000, 100.000000, 100.000000, 100.000000, 80.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Producer : Adobe PDF library 8.00 Has XFA : No Page Count : 6 Creator : Adobe Illustrator(R) 13.0 For : Bill Dickson, Bounding Box : -399 -105 1876 591 Creator Version : 13 Container Version : 11EXIF Metadata provided by EXIF.tools