Tivo Digital Video Dvr Recorders R24008A Users Manual Series2 Start Here (2003)
R24008A to the manual 87c268de-86da-45df-b8e9-96686ee8c0c6
2015-02-02
: Tivo Tivo-Digital-Video-Dvr-Recorders-R24008A-Users-Manual-449868 tivo-digital-video-dvr-recorders-r24008a-users-manual-449868 tivo pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
Start Here ® 1 Activate and Connect 2 Add a VCR (optional) 3 Complete Guided Setup We’re here to help! Online Customer Support www.tivo.com/support STEP 1 Activate and Connect Let’s Get Started! Activating and connecting a basic system takes less than half an hour. After connecting, completing on-screen Guided Setup should take less than an hour. See the Installation Guide for additional examples and explanations. Activate the TiVo Service To activate the TiVo service, visit www.tivo.com/activate. Don't have Internet access? Call TiVo Customer Support at 1-877-367-8486. You'll need the 15-digit TiVo service number of your DVR. (You can find the number by looking at the label on the back of your DVR.) Write your service number here for reference: _______________________. Connect your TiVo DVR Question: Do you have a cable or satellite box? No I don't have a cable or satellite box Option A Yes I do have a cable or satellite box Option B page 3 page 4 Get to know your cables (Don’t worry if you don’t use all of them.) Composite cable with L/R Audio (red and white) and Video (yellow) Audio/Video Cables Phone cord Phone splitter RF Coaxial cable Power cord Control Cables (allow the DVR to change channels on a cable or satellite box) 2 IR Control cable Serial (Data) Control cable (for DIRECTV® satellite receiver or Motorola/General Instruments DCT2000 digital cable box) Option A No Cable or Satellite Box If you have a cable or satellite box, see Option B on the next page. Before you begin: Unplug the connections to your VCR if you have one. The TiVo DVR replaces your VCR in this setup. After you’ve completed these steps, go to page 6 if you want to add your VCR; otherwise, go to page 7 to complete setup. ® TiVo DVR IN For additional setups, check the Installation Guide. 02BTCD2X0 120 V~60Hz 0.75A Connect program source to DVR Connect the RF Coaxial cable coming out of the wall (from your antenna or cable) to the jack labeled RF In on the DVR. Connect DVR to TV Connect the Composite A/V cables from the DVR’s audio/video output to the TV’s audio/video input. [Alternate: If your TV doesn’t have Composite A/V connectors, connect the RF Coaxial cable from the RF Out connector on the DVR to the Antenna In connector on the TV. Set the 3/4 switch on the back of the DVR, and tune your TV to the same channel.] Connect phone line to DVR Television INPUT Antenna In R L VIDEO To connect your phone and the DVR to the same phone jack, use the provided phone splitter. Plug in DVR power cord Tune TV (if necessary) to see the Welcome screen Turn on your TV. If you do not see the Welcome screen displayed, use the Input, Source, or TV/Video button on your TV to select the correct audio/video source. Press the button until the Welcome screen is displayed. [Alternate: If you used RF Coaxial cable in Step 2, tune your TV to the same channel (either 3 or 4) that the 3/4 switch on the back of the DVR is set to. The Welcome screen should appear.] Now go to page 6 Tips and Alternatives . If your TV • This setup shows Composite A/V cables doesn’t have Composite A/V connectors, use an RF Coaxial cable instead. If your TV has an S-Video connector, you might prefer to use an S-Video cable (not supplied) for your video connection. See the Installation Guide for details. • Remember to connect the OUT connector of one device to the IN connector of the next. OUT IN • After you complete Guided Setup, you’ll be able to connect your DVR to a home network and use a shared broadband Internet connection instead of a phone line to make connections to the TiVo service. See the TiVo Viewer’s Guide for details. 3 Cable or Satellite Box Option B If you don't have a cable or satellite box, see Option A on the previous page. Before you begin: Unplug the connections to your VCR if you have one. The TiVo DVR replaces your VCR in this setup. Cable or Satellite Box RF In RF Out Serial After you’ve completed these steps, go to page 6 if you want to add your VCR; otherwise, go to page 7 to complete setup. Audio/Video Out ® Make sure that the cable from the wall is connected to the cable or satellite box Connect cable or satellite box to DVR TiVo DVR IN Connect the Composite A/V cables from the cable or satellite box’s audio/video output to the DVR’s audio/video input. Connect DVR to TV 120 V~60Hz 0.75A For additional setups, check the Installation Guide. Connect the Composite A/V cables from the DVR’s audio/video output to the TV’s audio/video input. [Alternate: If your TV doesn’t have Composite A/V connectors, connect the RF Coaxial cable from the RF Out connector on the DVR to the Antenna In connector on the TV. Set the 3/4 switch on the back of the DVR, and tune your TV to the same channel.] Connect phone line to DVR Television Note: Your cable box or satellite receiver may also require a phone line. To connect both the DVR and the cable or satellite box to the same phone jack, use the provided phone splitter. INPUT Antenna In Choose a Control cable for channel changing R L VIDEO To record shows or display live TV, the DVR must change the channel on your cable or satellite box. To do so, it sends a signal through either the IR (infrared) Control cable or the Serial Control cable. See the Installation Guide for details. What kind of satellite or cable box do you have? DIRECTV® satellite box with 9-pin data connector Go to Serial Control step Motorola/General Instruments DCT2000 series cable box Go to Serial Control step Any other satellite or cable box Go to IR Control step Continue to page 5 4 Serial Control Connect Serial Control cable Plug the Serial Control cable into the 9-pin Serial (Data) connector: on the back of your cable or satellite box (see in the setup diagram on page 4). Plug the other end into the Control Out/Serial connector (the upper mini-jack) on your DVR. Now skip to step . Connect the IR Control cable, shown below, if you didn't use the Serial Control cable. See step . IR Control Connect IR Control cable If you didn’t use Serial Control (step ), plug the purple end of the IR Control cable into the Control Out/IR connector (the lower mini-jack) on the DVR. This cable allows the DVR to change channels by sending infrared (IR) signals to the cable or satellite box. extends 1½ " Cable or Satellite Box Locate IR sensor on cable or satellite box You must locate the IR sensor on the front of the cable or satellite box. It’s a tiny round bulb; if you shine a flashlight into the plastic “window,” you can see it. Mount IR emitters onto cable or satellite box Mount the emitters in front of the IR sensor (one on top of the box and one on bottom). Be sure both emitters stick out about 1 ½ inches directly in front of the IR sensor. Then use the adhesive strips provided to keep them in place. ® TiVo DVR Now continue with step . Plug in all power cords Tune TV (if necessary) to see the Welcome screen Turn on your TV. If you do not see the Welcome screen displayed, use the Input, Source, or TV/Video button on your TV to select the correct audio/video source. Press the button until the Welcome screen is displayed. [Alternate: If you used RF Coaxial cable in Step 3, tune your TV to the same channel (either 3 or 4) that the 3/4 switch on the back of the DVR is set to. The Welcome screen should appear.] Now go on to page 6 Tips and Alternatives . If your TV • This setup shows Composite A/V cables doesn’t have Composite A/V connectors, use an RF Coaxial cable instead. If your TV has an S-Video connector, you might prefer to use an S-Video cable (not supplied) for your video connection. See the Installation Guide for details. • Remember to connect the OUT connector of one device to the IN connector of the next. OUT IN • After you complete Guided Setup, you’ll be able to connect your DVR to a home network and use a shared broadband Internet connection instead of a phone line to make connections to the TiVo service. See the TiVo Viewer’s Guide for details. 5 STEP 2 Add a VCR (Optional) First complete Step 1, Option A or B Before You Begin Before you begin: You will be using this diagram for VCR connections only (highlighted in red). You must complete Option A (p. 3) or Option B (pp. 4-5) before connecting a VCR. Complete Option A (p. 3) or Option B (pp. 4-5). ® TiVo DVR The Installation Guide contains additional pictures of completed VCR setups (with and without a cable or satellite box, and for a TV with only one input). IN 120 V~60Hz 0.75A Connect DVR to VCR Connect an RF Coaxial cable from the RF Out connector on the DVR to the Antenna In connector on the VCR. Connect VCR to TV Connect another RF Coaxial cable from the RF Out connector on the VCR to the Antenna In connector on the TV. VCR (optional) [If your TV only has one input, see the Installation Guide for the appropriate setup including a VCR.] Tune TV (if necessary) to see the Television Welcome screen Press the Input, Source, or TV/Video button on your TV until the Welcome screen is displayed. Now you’re ready to begin Guided Setup. How do I add a DVD player? INPUT R L VIDEO Antenna In Your TiVo DVR usually does not change the way you connect a DVD player to your TV. Connect the audio/video cable that came with your DVD player from the DVD player’s audio/video output to the audio/video input on the TV. To add both a DVD player (or game console) and a VCR, see the setups in the Installation Guide. How do I watch video tapes on my VCR? Press the Input, Source, or TV/Video button on your TV until you see channel numbers displayed. Then use the buttons on the front of your TV to go to channel 3 or 4, depending on how the Channel 3/4 switch on your VCR is set. Now go to page 7 6 STEP 3 Complete Guided Setup Guided Setup is Easy! When you see the Welcome screen, you are ready to begin Guided Setup. During Guided Setup you will be asked simple questions about your program source, ZIP code, and time zone. Use the SELECT button on the remote to select or deselect options or to move to the next screen. Use the LEFT arrow to go back to the previous screen. Helpful Hints (see the Viewer's Guide for more information) Select Begin! to start Guided Setup Phone What if your phone jack isn’t close to the TiVo DVR? Use the included 25-foot phone cord to complete Guided Setup. Afterwards, you’ll be able to connect your DVR to a home network and use a shared broadband Internet connection instead of a phone line to make connections to the TiVo service. See the TiVo Viewer’s Guide for details. Having trouble with the Guided Setup phone calls? Go back to the Phone Dialing Options screen and try these steps: If you have call waiting, take out any prefix you inserted. Turn off dial tone detection. Turn off phone availability detection. (See the TiVo Viewer’s Guide for details.) If you need to use your phone while a Guided Setup call is in progress, pick up the phone, hang up, and wait about 45 seconds. When you pick up the phone again, the line should be free. You can complete Guided Setup later. Channels During Guided Setup, you select a channel lineup. A channel lineup is the set of channels you subscribe to–like “Digital Extended Sc Basic” or “DIRECTV-Boston, MA.” If you aren’t sure of your lineup, check your channel lineup card, your cable bill, or make your best guess. Guided Setup includes a Channels You Receive screen where you can check to make sure that channel numbers shown match your lineup. If your guess was wrong, go back and select a different lineup. You can use the Channels You Receive screen to remove check marks for channels you don't receive or never watch. (You can change your channel selections later, even after you complete Guided Setup.) Account and Billing You can view, change, and manage your TiVo account information online using Manage My Account. Activate TiVo service, purchase Home Media Option, name your DVRs, and more! If you want to change your billing option, or update your address or credit card information at any time, visit www.tivo.com/manage. 7 Have fun! TiVo, TV your way.™ TiVo Central ® and Now Playing Watch Live TV To see what’s on now, press LIVE TV. Live TV ® TV Info T r Powe Find What’s on TV npu VI t W The TiVo button takes you to TiVo Central, where you can access all of the features unique to the TiVo service. Press the TiVo button twice to go to Now Playing on TiVo and see all of your recorded programs. Press the GUIDE button to display the TiVo Live Guide. You can browse up to two weeks of program information, choose a program to watch or record, and select from two different guide styles. G uide indow Select e Mut Vol Chan cord Re Page Play Control Your TV and Stereo Slo w 1 DVR 2 6 5 4 7 Tell TiVo What You Like 3 2 1 ar Cle 9 8 En You can program the POWER, VOLUME, MUTE, and TV INPUT buttons on the TiVo remote to control your TV and A/V stereo system. See the Installation Guide for instructions. /La ter st 0 Control Live TV Pause TV for up to 30 minutes, rewind and fast forward at three speeds, and instant replay–all at the touch of a button. Rate programs using the THUMBS buttons. Then check out TiVo Suggestions (in Pick Programs to Record) and watch for suggestions in Now Playing on TiVo. Take a Tour to Learn More To learn more about TiVo service features such as Season PassTM recordings, WishListTM searches, and Parental Controls, take the tours in Chapter 2 of the TiVo Viewer’s Guide. And that's just the beginning! Purchase the Home Media OptionTM premium feature package for your Series2 DVR and enjoy the best in networked home entertainment. See the Viewer’s Guide or www.tivo.com/media for details. Need some help? Check out the Installation Guide and TiVo Viewer's Guide for more information about setting up your TiVo DVR, and activating and using the TiVo service. If you still need help, visit www.tivo.com/support, where you'll find Installation Self-Help, Frequently Asked Questions, step-by-step troubleshooting, and the ability to get live interactive help from expert users. See the Installation Guide for complete Customer Support contact information. www.tivo.com/support ©2003 by TiVo Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. Printed in Mexico. TiVo, the TiVo logo, TiVo Central, and TiVolution are registered trademarks of TiVo Inc. "TiVo, TV your way", WishList, Season Pass, Home Media Option, the Series2 logo, the Thumbs Down logo and text, and the Thumbs Up logo and text are trademarks of TiVo Inc. DIRECTV is a trademark of DIRECTV, Inc., a unit of Hughes Electronics Corp. All other trademarks are the properties of their respective owners. SDOC-00074-100 Rev. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:dab9f701-89c1-4cf0-98e2-ef32fae4df9e Producer : Acrobat Distiller 5.0.5 (Windows) Create Date : 2003:08:14 20:29:21Z Modify Date : 2006:12:07 16:22:19+05:30 Metadata Date : 2006:12:07 16:22:19+05:30 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:0fb71b1c-45c4-475b-bdd2-4d630107dc5e Format : application/pdf Creator : ericl Title : TiVo Series2 DVR Start Here (2003) Author : ericlEXIF Metadata provided by EXIF.tools