Tokai Rika Co D02RB Keyless Entry System for Cars User Manual

Download:
Mirror Download [FCC.gov]
Document ID	246771
Application ID	fPcc6J+QNcNYvOxlJjuFMw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.09kB (88594 bits)
Date Submitted	2002-06-03 00:00:00
Date Available	2002-06-03 00:00:00
Creation Date	2002-05-29 14:30:12
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-05-29 14:30:12
Document Title	User Manual

FCC ID:MOZD02RB
OWNER'S MANUAL (DRAFT)
Operating instructions for this system, named Remote Control Door Lock, will be
contained in the owner’s manual of the vehicle and its contents will be as follows:
Remote Control Door Lock (if equipped)
You can look all doors simultaneously or unlock the driver's seat door only and all
doors simultaneously by operating the transmitter near the vehicle. For the wagon
model, the tailgate lock is contorlled, too.
Push the “LOCK” button on the transmitter to lock the all doors. Be sure the doors
are locked after you operate the “LOCK" button. Push the “UNLOCK” button on the
transmitter one (1) time to unlock the driver’s seat door. Push the “UNLOCK” button
on the transmitter again to unlock the all doors within about 5 seconds after the
“UNLOCK" button is first pushed The doors will automatically look again if no door
is opened within about 30 seconds after the “UNLOCK” button is finally pushed.
NOTE:
* The maximum operating distance is about 3 m (10 ft), but this can vary depending
on the surroundings, especial/y near other transmitting devices such as radio
towers or CE (Citizen's Band) radios,
* The door locks can not be operated with the transmitter;
~ if the ignition key is in the ”ON” or “STAR T” position, or
- if any door is open.
' it you lose your transmitter, ask your Suzuki dealer as soon as possible for a
replacement and to have the lost one deactivated.
l A CAUTION
The transmitter is a sensitive electronic instrument.
To aboid damaging the transmitter, do not expose it
to impacts, moisture, or high temperature’tsuch as
on the dashboard under direct sunlight).
FCC ID : MOZDOZRB
Replacement of the transmitter battery
If the transmitter becomes unreliable, replace the battery,
1) Put the edge of a coin or a flat blade sorew driver in the slot of the transmitter and
pry it open.
2) Replace the battery (lithium disc»type CR2032 or equivalent) so its + terminal
faces the “+” mark of the transmitter.
3) Close the transmitter firmly.
4) Make sure the door locks can be operated with the transmitter.
5) Dispose of the used battery properly according to applicable rules or regulations.
Do not dispose of lithium batteries with jordinary household trash.
Swallowing a lithium battery will cause serious
internal injury. Do not allow anyone to swallow a
lithium battery. Keep lithium batterises away
from children and pets. If swallowed, contact
h sician immediately.
A CAUTION
The transmitter is a sensitive electronic
instrument. To aboid damaging the transmitter,
donot expose it to dust, moisture, or tampering
the internal p_arts.
FCC ID :MOZD02RB
For vehicles sold In U.S.A.:
FCC ID:MOZD01 TB ,
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC ID:MOZD02RB
MADE IN JAPAN ,
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
Changes or modifications not expressly approved by the party fl
responsible for compliance could void the user‘s authority to
operate the equipment.
For vehicles sold In Canada
This device complies with FtSS-210 of Industry Canada,
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device
The term "IC:" before the certification/registration number only
signifies that the Industry Canada technical specifications were
met.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:05:29 14:30:12
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:05:29 14:30:12+09:00
Page Count                      : 3

EXIF Metadata provided by EXIF.tools