TomTom 4FC54 GPS Navigation System User Manual 06 4FC64 4FC54 4FC43
TomTom International BV GPS Navigation System 06 4FC64 4FC54 4FC43
TomTom >
Exhibit 08 Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2187406 |
| Application ID | HcA1jopStZGyMU9T4UFSNA== |
| Document Description | Exhibit 08 Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 363.39kB (4542317 bits) |
| Date Submitted | 2014-02-12 00:00:00 |
| Date Available | 2014-08-11 00:00:00 |
| Creation Date | 2017-10-24 01:03:01 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-24 01:03:01 |
| Document Title | 06_User Manual_(4FC64_4FC54_4FC43).pdf |
| Document Creator | PDFCreator Version 0.9.5 |
| Document Author: | IreneChung |
TomTom GO
Reference Guide
TO mTOmW?
Contents
Welcome to navigation with TomTom 6
Get going 7
Installing in your car.
Positioning the device.
Switching on and off
Setting up
GPS receptIo
Planning a route to an address using search
Planning a route using the map .....
Connecting to TomTom services 13
About TomTom services
Always connected devices ..
Smartphone connected devices.
Personal Area Networks” ..
Connect to TomTom services using your smartphone
Reconnecting your smartphone...
Connect to TomTom services using a different smartphone
Deleting phones ...........
Unable to get a connection.
My device 17
Memory card slot
Device not starting
Charging your device
Sending information to TomTom
Getting help...
Take care of your navigation device
What's on the screen 19
The map view
The guidance VIew
The route bar
Advanced Lane GuIdance.
Time-dependent speed limits in Australia and New Zealand
Using gestures 24
All about gestures
Main Menu 25
Navigation buttons
Other buttons
Volume control
Using Quick Search 28
About search
Planning a route to a POI using search
Entering search terms..........
Working with search results
About postcodes ...............
About mapcodes...
List of POI type icons
Planning a route 38
Planning a route to an address using search
Planning a route to a POI using search
Planning a route using the map..
Planning a route using My Places.
Planning a route using coordinates
Planning a route using a mapcode
Planning a route in advance
Finding a car park.....
Finding a petrol station
Changing your route 53
The Current Route Menu
Types of route.
Route features .
Adding a stop to your route from the current route menu
Adding a stop to your route using the map.....
Deleting a stop from your route.
Reordering stops on a route
My Routes 57
About My Routes ..................
Saving a route..
Navigating using a saved route
Adding a stop to a saved route using the map
Deleting a route from My Routes ..............
Traffic 60
About TomTom Traffic
About RDS-TMC
Safety Notice
The route bar...
Looking at traffic on the map
Looking at traffic on your route
Traffic incidents
Speed Cameras 64
About speed cameras
Speed camera warnings
Changing the way you are warned
Reporting a new speed camera .....
Confirm or remove a mobile speed camera
Updating locations for cameras and hazards...
Danger Zones 68
About danger zones and risk zones.
Danger zone and risk zone warnings
Changing the way you are warned
Report a risk zon
Updating locations for danger zones and risk zones
My Places 71
About My Places....
Setting your home location.
Changing your home location.
Adding a location from My Places .........
Add a location to My Places from the map
Adding a location to My Places using search
Deleting a recent destination from My Places.
Deleting a location from My Places...........
Settings 75
Appearance......
Brightness...
Arrival information panel
Voices
Maps.
Route Planning
Sounds and Warnings.
Speed camera warnings.
Safety warnings ............
Language and Unit
System
Help..............
Help 82
Help menu options...............
Product certification 83
Finding product certification information on your device............................... ...83
MyDrive 84
About MyDrive ...................... ...84
About MyDrive Connect
MyTomTom account....
Setting up MyDrive ...............
Addendum 86
Copyright notices 93
Welcome to navigation with TomTom
This Reference Guide explains all you need to know about your new TomTom GO navigation
device.
If you want a quick read of the essentials. we recommend that you read the Get going chapter.
This covers installation, switching on, setting up and pianning your first route.
After that, you will probably want to connect to TornTom services and you can read all about that
in the Connecting to services chapter.
For information about what you see on the device itself. go to:
- What‘s on the screen
- Using gestures
I Main menu
Tip: There are also frequently asked questions (FAQs) at tomtomcomlsugport. Select your
product modei from the list or enter a search term.
We hope you enjoy reading about and, most importantly, using your new naVIgation device!
Get going
Installing in your car
Use the mount provided with your device to install your TomTom GO device in your vehicle. Read
the instructions about positioning your device before you install your device.
To install your device, do the following:
1. Connect the supplied USB cable to the mount. If the mount is integrated into your device,
connect the USB cable to the device.
Note: Use ONLY the USB cable supplied with your device. Other USB cables may not work.
2. Connect the USB cable to the USE car charger and plug this into the power supply on your
dashboard.
3. Choose the best smooth location, on your windscreen or side window, to mount your
TomTom GO device.
Make sure that both the suction cup on the mount and your windscreen are clean and dry.
Press the suction cup of the mount firmly against your windscreen.
Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
N979“?
If your mount is not integrated into your device, place your device in the mount, making sure
that it clicks into place.
Dashboard mount disks are available as part of a range of accessories for your device. For more
information, go to tomtom.com/accessories.
Positioning the device
Be careful where you install your navigation device in your car. The device shouldn‘t block or
interfere with any of the following:
- Your view of the road
. Any of the controls in your car
- Any of the mirrors
. Any airbags
You should be able to reach the device easily without leaning or stretching. You can attach the
device to the windscreen or side window or you can use a Dashboard Mount Disk to attach the
mount to your dashboard.
Switching on and off
Switching your device on
Press the On/Of'f button until your device starts. If the device was off you see the map view. If your
device was sleeping you see the last screen you were looking at.
Sending your device to sleep
To send your navigation device to sleep, press the 0n/Off button and then release it.
You can also press the On/Off button for more than 2 seconds until you see the Sleep and Turn
Off buttons. Select Sleep to make the device sleep.
Tip: To send your navigation device to sleep whenever it is removed from the mount, go to
Battery settings in the Settings Menu.
Switching your device off completely
To switch off your navigation device completely, you can do one of the following:
. Press and hold the On/Off button for more than 2 seconds until you see the Sleep and Turn Off
buttons. Select Turn Off to switch off the device. Select the “back“ button if you don‘t want to
switch your device off.
. Press and hold the On/Off button for more than 5 seconds until the device switches off.
Setting up
Important: Take care to select the correct language as the language you choose will be used for
all text on the screen.
When you first switch on your device, you have to answer a few questions to set up the device.
Answer the questions by touching the screen.
GPS reception
When you first start your TomTom GO navigation devic9, the device may need a few minutes to
determine your position. In future, your position will be found much faster.
To ensure good satellite reception, use your device outdoors and keep it upright. Large objects
such as tall buildings can sometimes interfere with reception.
Important: OuickGPSfix contains information about satellite positions which helps your navigation
device find your position faster. QuickGPSfix information is sent to Always Connected devices in
real time and to Smartphone Connected devices when connected to TomTom services using your
smartphone.
Planning a route to an address using search
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to an address using search, do the following:
1. Select the Main Menu button to open the Main Menu.
[.3
Select Search.
The search screen opens with the keyboard showing.
Use the keyboard to enter the name of the place you want to plan a route to.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if
they are available. For example, press and hold the letter “e“ to access these characters: "3 e
e é e e“ and more...
< high street
HighStveeNBelmont) -. 1 Shopping :enllv
| . . v.
HIghStIeetlllketshallSa su; 1 Argos
ngh Stleet (lken, Woodl 5w
You can search for an address, town, city, postcode or magcode.
Tip: To search for a specific street in the United Kingdom or the Netherlands, type in a post-
code, then leave a space and then type in the house number. For example, "1017GT 35“. For
other countries, postcodes are area-based and will give you a list of matching cities, towns
and streets in your search results.
Note: When searching, the whole map is searched. If you want to change how the search is
done, select the button to the right of the search box. You can then change where the search
is done, for example, to being along the route or in a city.
As you type the address, suggestions are shown based on what you have entered. You can
continue typing or select a suggestion.
Towns and roads are shown on the left, POls are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select an address suggestion.
< High 5m:
5m. m. Map and u.
< l Hut: sue-l
am. my. Map m u.
7. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus [+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop; to a route that you have already planned.
Tip: You can save a route using My Routes.
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using the map, do the following:
1. Move the map until you can see the destination that you want to navigate to. Here are some of
the gestures you can use to move the map:
- Pinch - to zoom, touch the screen with your thumb and a finger. Move them apart to zoom
in or move them together to zoom out.
- Double tap rto zoom in, double tap on the map.
10
- Drag - to scroll the map, touch the screen with a finger and move it across the screen.
- Flick - to scroll the map a long way, flick the tip of a finger across the screen.
Tip: For a complete list of gestures, see Using gestures.
2. When you have found your destination on the map, select it by pressing and holding the
screen for about one second.
A pop-up menu shows the nearest address.
3. To plan a route to this destination, select the drive button:
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
11
Tip: You can use the location you selected in other ways, such as adding it to My Places, by
selecting the pop-up menu button.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stag to a route that you have already planned.
Tip: You can save a route using My Routes.
12
Connecting to TomTom services
About TomTom services
TomTom services give you real-time information about traffic and speed cameras on your route.
To get TomTom services on your 60 you need a MyTomTom account.
The way you connect your GO to TomTom services depends on your navigation device. A GO can
connect in one of the following ways:
. With a permanent connection directly from your G0. These navigation devices are called
‘Always Connected‘ devices.
. With a connection via your smartghone. These devices are called 'Smartphone Connected‘
devices.
Check tomtom.com/connect for more information.
Note: TomTom services are not available in all countries or regions, and not all services are
available in all countries or regions. For more information on available services in each region,
go to tomtom.com/services.
Always connected devices
Follow these steps to get TomTom services on a TomTom GO that is always connected:
Note: When you start your G0 for the first time, or after a reset, you are given the option to
activate TomTom Services when you set up your G0.
1. Select Traffic 8 Speed Cameras or Traffic 8 Danger Zones in the Main Menu.
2. Select Activate now.
3. If you are prompted, select Yes to agree to send information to TomTom.
Note: You cannot use TomTom services unless you agree to send information to TomTom.
4. Create a new MyTomTom account or login to your existing MyTomTom account.
Tip: If you already own a TomTom navigation device, we recommend that you open a new
MyTomTom account for your G0 using a different email address.
TomTom services are now active.
Smartphone connected devices
Some TomTom navigation devices use your phone to connect to TomTom services so that you
can receive realitime TomTom Traffic and safety warnings. Your phone needs to be compatible
with the navigation device, and you must have a data plan from a mobile services provider. Go to
torntorn.com/connect for more information.
Using TomTom services means that data is sent and received by your phone using your mobile
services provider.
13
Important: You might have additional costs when you use the internet on your phone, especially
if you are outside the area covered by your data plan. Check with your mobile services provider
for more information.
Personal Area Networks
Your phone shares its internet connection by using the phone's Bluetooth and Personal Area
Network (PAN) functions.
Depending on your phone‘s Operating System, this network, or PAN, might be called one of the
following names:
. Personal Hotspot
- Tethering or Bluetooth Tethering
- Tether or Bluetooth Tether
The PAN function is probably already in your phone‘s Operating System, or you can download an
app to create a PAN.
Note: Some mobile service providers don't allow their users to use a PAN. If your phone
doesn‘t have the PAN function, you should contact your service provider for more information.
Please check the user guide for your phone if you are having trouble finding the settings.
For more help, go to tomtom.com/connect.
Connect to TomTom services using your smartphone
To connect your GO to your phone, do the following:
Select Traffic fr Speed Cameras or Traffic 5. Danger Zones in the Main Menu.
2. Select Activate now.
If you are prompted, select Yes to agree to send information to TomTom.
Note: You cannot use TomTom services unless you agree to send information to TomTom.
4. Follow the instructions on your navigation device about switching on a Personal Area Network
on your smartphone.
5. Switch on Bluetooth on your phone, and make sure your phone is discoverable.
Select the next screen arrow on your navigation device.
Your device searches for your phone.
Tip: If your device cannot find your phone, make sure your phone is still 'discoverable‘ for
other Bluetooth devices. Select Search to search for your phone again.
7. Select your phone from the list on your navigation device.
Your navigation device connects to TomTom services using your phone's internet connection.
8. Create a new MyTomTom account or login to your existing MyTomTom account.
Tip: If you already own a TomTom navigation device, we recommend that you open a new
MyTomTom account for your GO using a different email address.
TomTom services are now active.
14
Reconnecting your smartphone
You do not need to do anything to reconnect your GO to your phone.
Your GO will remember your phone and will find it automatically when you have Personal Area
Network (PAN) and Bluetooth switched on and you are in range of your navigation device. If you
have a valid TomTom services subscription, the service will start automatically.
The Bluetooth icon at the top of the main menu screen shows the status of the Bluetooth connec-
tion:
Bluetooth not con nected.
Bluetooth connecting. Your device is trying to automatically connect to
your phone.
Bluetooth connected. Your device is connected to your phone.
If you want to connect using another ghone, you must turn on Personal Area Network (PAN) and
Bluetooth on that phone, then let your device search for the phone.
Connect to TomTom services using a different smartphone
1. Follow the instructions on your device about switching on a Personal Area Network on your
smartphone.
2. Switch on Bluetooth on your smartphone.
Select Traffic 8 Speed Cameras or Trafiic 8 Danger Zones in the Main Menu.
Select the pop-up menu button then select Search for Phones.
Your navigation device searches for your smartphone.
Tip: If your device cannot find your smartphone, make sure your smartphone is still ‘discovr
erable‘ for other Bluetooth devices.
5. Select your smartphone from the list of smartphones on your device.
Your navigation device connects to TomTom services using your smartphone internet con-
nection.
6. Login to your existing MyTomTom account.
TomTom services are now active.
Deleting phones
Select Traffic Er Speed Cameras or Traffic 8 Danger Zones in the Main Menu.
Select the pop-up menu button then select Delete Phones.
Select the phone that you want to delete.
PEANT'
Select Delete.
Your phone is deleted.
15
Tip: If you delete all your connected phones, you will no longer be able to use TomTom ser-
vices.
Unable to get a connection
If your G0 cannot connect to your phone, or you have no internet connection, check the follow-
ing:
- Your phone is shown on your TomTom navigatlon device.
. Your phone‘s Bluetooth is switched on.
- Your phone‘s Personal Area Network (PAN), which is also known as Personal Hotspot, Tether-
ing, or Bluetooth Tethering, is switched on.
I Your data plan with your mobile services provider is active, and you can access the internet
on your phone.
16
My device
Memory card slot
Some TomTom navigation devices have a memory card slot that is located on the side or bottom
of the device.
Before you use the memory card slot, make sure that you have the latest version of the application
installed on your navigation device by connecting to MyDrive using a computer.
When your device is up-to-date, you can use a memory card as extra storage space to add extra
maps to your device. Maps can be purchased from torntom.com.
Device not starting
In rare cases, your TomTom GO navigation device may not start correctly or may stop responding
to your taps.
First, check that the battery is charged. To charge the battery, connect your device to the car
charger. It can take up to 2 hours to fully charge the battery.
If this does not solve the problem, you can reset the device. To do this, press and hold the On/Off
button until your device begins to restart.
Charging your device
The battery in your TomTom GO navigation device charges when you connect it to the car
charger or to your computer.
You are warned when the battery level is low or critical. You lose your connection to some
TomTom services when the battery level is low or critical. When the battery is empty, the device
goes into sleep mode.
Important: You should plug the USB connector directly into a USB port on your computer and not
into a USB hub or USB port on a keyboard or monitor.
Sending information to TomTom
When you first start navigating or perform a full reset, your device asks for permission to collect
some information about your use of the navigation device. The information is stored on the device
until we retrieve it. We use it anonymously to improve our products and services. If you use our
services, we will also use your location information to deliver the services to you.
You can change whether you share this information with us at any time by doing the following:
In the Main Menu, select Settings.
Select System.
Select Your information.
PWNT'
Select the button to turn sending of information on or off.
17
Note: If you choose not to share this information, you will no longer receive our services. This
is because services need to send the location of your device to TomTom in order to receive the
traffic information related to where you are. The end date of your subscription remains the
same, even if you do not share this information with us.
Additional information
If you think that your information is not being used for the purpose for which you have provided it
to TomTorn, contact us at tomtom.com/supgort.
You can find current and more detailed information at tomtom.com[privacv.
Getting help
You can get further help by going to tomtom.com/support.
For warranty and privacy information, go to tomtom.com/legal.
Take care of your navigation device
It is important to take care of your device:
I Do not open the casing of your device under any circumstances. Doing so may be dangerous
and will invalidate the warranty.
- Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.
18
What's on the screen
The map view
The map view is shown when you start your navigation device and you have no planned route.
Your actual location is shown as soon as your device has found your GPS location.
You can use map view in the same way as you might look at a traditional paper map. You can
move around the map using gestures, and zoom using the Zoom buttons.
Important: Everything on the map is interactive including the route and the map symbols - try
selecting something by tapping it and see what it does!
The map shows your current location and many other locations such as your My Places locations.
If you have not planned a route the map is zoomed out to show the area around your location. If
you have planned a route, your complete route is shown on the map. You can add stops to your
route directly from the map.
1. Back button. This button returns the map to an overview of your whole route or, if no route is
planned, moves the map to put your current location at the centre.
2. Switch view button. Select the switch view button to change between the map view and the
guidance view. When in map view, the small arrow rotates to show you your current driving
direction, with North being up.
3. Zoom buttons. Select the zoom buttons to zoom in and out.
19
4. Current location. This symbol shows your current location. Select it to add it to My Places or
search near your current location.
5. Selected location. Press and hold to select a location on the map. Select the poprup menu
button to show options for the location, or select the drive button to plan a route to the loca-
tion.
6. Main Menu button. Select the button to open the Main Menu.
7. Map symbols. Symbols are used on the map to show your destination and your saved places:
Your destination.
Q Your home location. You can set your home location in My Places.
' u A stop on your route.
- A location saved in My Places.
Select a map symbol to show the pop-up menu showing a range of things you can do.
8. Traffic information. Select the traffic incident to display information about the traffic delay.
9. Your route, if you have planned a route. Select the route to clear it, change the route type, add
a stop or save changes to your route.
10. Route bar. The route bar is shown when you have planned a route.
The guidance view
The guidance view is used to guide you along the route to your destination. The guidance view is
normally in 3D, but you can change it to 2D.
The guidance view is shown when you start driving. You see your current location and details
along your route, including 3D buildings in some cities.
20
When your navigation device starts after it was turned off and you have a route planned, you are
shown the map view with your current location.
1. Switch view button. Select the switch view button to change between the map view and the
guidance View.
2. Zoom buttons. Select the zoom buttons to zoom in and out.
Tip: You can also pinch to zoom in and out.
3. Instruction panel. This panel shows the following information:
- The direction of your next turn.
- The distance to your next turn.
- The name of the next road on your route.
- Lane guidance at some junctions.
4. Route symbols. Symbols are used on your route to show your starting location, your stog .
and your destination.
5. Main Menu button. Select the button to show the Main Menu.
Speed panel. This panel shows the following informati n:
- The speed limit at your location.
- Your current speed.
- The name of the street you are driving on.
7. Current location. This symbol shows your current location.
8. Route bar. The route bar is shown when you have planned a route.
The route bar
The route bar is shown when you have planned a route. It has an arrival information panel at the
top, and a bar with symbols underneath.
21
Tip: The distance ahead shown by the route bar is 50 km or 30 miles. The bottom half of the
route bar shows the first third of this distance (up to 16 km or 10 miles from your location) while
the top half shows the remaining two thirds ie. 34 km or 20 miles).
The arrival information panel shows the following information:
I The estimated time that you will arrive at your destination.
- The length of time to drive to the destination from your current
location.
I A parking button is shown near the destination flag when parking is
available near your destination.
Tip: If your destination is in a different time zone, you see a plus
(+) or a minus (-) sign and the time difference in hours and half
hours in the arrival information panel. The estimated time of arrival
is the local time at your destination.
If you have stops on your route, select this panel to change between
information about the next stop and your final destination.
You can choose the information you see on the arrival information
panel.
The bar uses symbols to show the following information:
I The next two SLIDE on your route.
I Petrol stations that are directly on your route.
I TomTom Traffic.
I TomTom Speed Cameras and Danger Zones.
The symbols are in the order that they occur on your route. For traffic
incidents, the symbol for each incident alternates between showing the
type of incident and the delay in minutes. Select a symbol to see more
information about a stop or an incident.
The total time delay due to traffic jams and other incidents on your
route, including information provided by IO Routes, is shown above the
symbols.
For a complete list of incident types. see Traffic incidents.
The bottom of the route bar represents your current location and shows
the distance to the next incident on your route.
Tip: To make the route bar more readable some incidents may not be shown. These incidents
will always be of minor importance and only cause short delays.
The route bar also shows messages about the status of your GO.
Advanced Lane Guidance
Note: Lane guidance is not available for all junctions or in all countries.
Your TomTom GO navigation device helps you prepare for motorway exits and junctions by
showing the correct driving lane for your planned route.
22
As you approach an exit or junction, the lane you need is shown on the screen and in the instruc-
tion panel.
Tip: To close the lane image, select anywhere on the screen or press the back button.
To turn lane images off, select Settings in the Main Menu, then select Appearance. Switch off
the Show previews of motorway exits setting.
Time-dependent speed limits in Australia and New Zealand
If you are driving in Australia or New Zealand, the speed limit in the speed panel changes de-
pending on the time of day.
For example, you may see the speed limit near schools decrease to 40 km/hr between 8 - 9am and
3 - 4pm.
23
Using gestures
All about gestures
You need to use gestures to control your navigation device.
This Reference Guide explains which gestures to use throughout the guide but here is a complete
list of all the gestures you can use.
Double tap
Drag
fi
Flick
Press and hold
Pinch to zoom
Tap or select
Touch one finger on the screen twice in rapid succession.
Example of when to use this: Zooming in on the map.
Put one finger on the screen and move it across the screen.
Example of when to use this: Scrolling around in the map.
Flick the tip of a single finger across the screen.
Example of when to use this: Scrolling a big distance on the map.
Put one finger on the screen for more than 0.5 second.
Example of when to use this: Opening the poprup menu for a place on
the map.
Touch the screen with your thumb and a finger. Move them apart to
Zoom in or move them together to zoom out.
Example of when to use this: Zooming in and out on the map.
Tap a single finger on the screen.
Example of when to use this: Selecting an item in the Main Menu.
24
Main Menu
Navigation buttons
On the mag View or guidance view, select the Main Menu button to open the Main Menu.
The following navigation buttons are available in the Main Menu:
Search Select this button to Search for an address, a place or a Point of Interest,
then Elan a route to that location.
Current route Select this button to clear or change your planned route.
My Places Select this button to show your saved glaces.
{.9
My Routes Select this button to show your saved routes.
Parking Select this button to find car Qarks.
25
Petrol Station Select this button to find etrol stations.
Traffic 9 Safety Select this button to W, or to check your
TomTom Traffic, TomTom SDeed Cameras or TomTom Danqer Zones
Warnings
subscription.
Other buttons
On the map or guidance view, select the Main Menu button to open the Main Menu.
The following buttons are available in the Main Menu screen, in addition to the navigation buttons:
Select this button to open the Settings Menu.
Select this button to open the Helg Menu. The Help Menu contains a
guided tour and information about your G0.
Select this button to return to the previous screen.
Select this button to return to the map view or guidance view.
Ulla
This symbol shows the status of the Bluetooth connection when you use
a smartphone to connect to TomTom services.
This symbol shows the power level of the battery in your device.
26
This symbol shows the status of the TomTom Traffic service.
Select this button to switch off voice instructions. You will no longer hear
spoken route instructions but you will still hear information such as traffic
information and warning sounds.
Tip: You can select the types of instructions you want to hear. Select
Voices in the Settings Menu and select the instructions you want to
hear.
Select this button to switch on voice instructions.
Select this button to reduce the brightness of the screen and display the
map in darker colours.
When driving at night or when drIVIng through a dark tunnel, It is easier
to view the screen and less distracting for the driver if the brightness of
the screen is dimmed.
Tip: Your device automatically switches between day and night col-
ours depending on the time of day. To switch off this feature, select
Apgearance in the Settings menu and switch off Switch to night
colours when dark.
Select this button to increase the brightness of the screen and display the
map in brighter colours.
I IQEM
On the map or guidance view, select the Main Menu button to open the Main Menu.
Select and slide the volume control to change the volume of voice instructions and warnings. If
the voice instructions are switched off, the volume control will still change to volume of the
warnings.
))fi
27
Using Quick Search
About search
You use search to find a wide range of places and then navigate to them. You can search for the
following:
I A specific address, for example, 123 Oxford Street, London.
I A partial address, for example, Oxford st Lon.
I A type of place, for example, petrol station or restaurant.
I A place by name, for example, Starbucks.
- A postcode, for example, W1 D 1LL for Oxford Street, London.
I A city to navigate to a city centre, for example, London.
I A POI [Point of Interest) near your current location, for example, restaurant near me.
I A pair of latitude longitude coordinates, for example, N 51°30’31" W 0°08’34”.
Tip: To search for a specific street in the United Kingdom or the Netherlands, type in a post-
code, then leave a space and then type in the house number. For example, "1017GT 35“. For
other countries, postcodes are arearbased and will give you a list of matching cities, towns and
streets in your search results.
Planning a route to a POI using search
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to a POI type or a specific POI using search, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Search.
The search screen opens with the keyboard showing.
3. Use the keyboard to enter the name of the place you want to plan a route to.
28
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if
they are available. For example, press and hold the letter "e“ to access these characters: “3 e
e e’ e e“ and more...
re;
Realdonualfllaumdal IUI‘; I" REStaumnt
w.- Rest area
R identIaIVegaPaikll m
I ( Nepali/garage
,n
000000 0
00000000
t 0000000
You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alr
ternatively, you can search for a specific F'OI, for example, “Rosie‘s Pizzeria“.
Note: When searching, the whole map is searched. If you want to change how the search is
done, select the button to the right of the search box. You can then change where the search
is done, for example, to being along the route or in a city.
4. As you type, suggestions are shown based on what you have entered. You can continue
typing or select a suggestion.
Towns and roads are shown on the left, POls are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select a POI type or an individual POI.
6. If you selected a POI type, select your chosen POI.
Thai (ate
Istanbul
Calico pol
New Island 5m (airy out .
Stowaway ball: house
soc
7. Select Drive.
29
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance View is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Select Search in the Main menu to start searching for addresses and F‘Ols. The search screen
opens showing the keyboard and the following buttons:
1 lilijll'drr‘r’:
High Stir-atmnlmnnn r- g snapping mum
HighStreetlllketshall » w Argos
High Slreei like" Woodl In
4 .
1. Back button.
Select this button to go back to the previous screen.
2. Search input box.
Enter your search term here. As you type, matching addresses and P0|s are shown.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if
they are available. For example, press and hold the letter “e" to access these characters: "3 e
e e e e" and more...
Tip: To edit, select a word you have already typed to place the cursor. You can then insert or
delete characters.
3. Type of search.
By default, the whole of the current map is searched. Select this button to change the type of
search to any of the following:
Current map
Select this option to search the whole of your current map with no
limit to the search radius. Your current location is the centre of the
search. The results are ranked by exact match.
30
Near me
Select this option to search with your current GPS location as the
search centre. The results are ranked by distance.
In town or city
Select this option to use a town or city as the centre for your search.
You need to enter the town or city name using the keyboard.
Along route
When a route has been planned, you can select this option to search
along your route for a specific type of location, for example, petrol
stations. When prompted, enter the type of location and then select it
in the right-hand column to carry out the search.
Near destination
When a route has been planned, you can select this option to use
your destination as the centre for your search.
Latitude Longitude
Select this option to enter a pair of latitude longitude coordinates.
You can enter any of these coordinate types:
- Decimal values, for example, 51.508742 -0.142822.
, Degrees, minutes and seconds, for example, N 51°30’31” W
0°08’34".
, GPS standard coordinates, for example, N 51 30.525 W 0
08.569.
4. View button.
Select this button to return to the map view or guidance View.
5. 1237! button.
Select this button to use numbers and symbols on your keyboard. Select the =\< button to
toggle between the numbers and more symbols. Select the ABC button to go back to the gen-
eral keyboard.
6. Keyboard layout button.
Select this button to change your keyboard layout to another language. You can choose up to
four layouts from the list. If you have more than one layout selected, selecting the keyboard
layout button opens a pop-up so you can quickly swap between your selected keyboard lay-
outs. Press and hold this button to go directly to the list of all the layouts.
7. List/map button.
Select this button to switch between showing the results in a list or showing the results on the
map.
Show/hide keyboard.
Select this button to show or hide the keyboard.
Tip: Select the Shift key once to make the next letter you type upper case. Double tap the Shift
key to use CapsrLock where all the letters you type are upper case. Select the Shift key once to
quit Caps-Lock.
Tip: To cancel a search, select the map/guidance view button in the top right-hand corner of the
screen.
31
After carrying out a search, you see your search results in two columns.
Address and city matches are shown in the leftrhand column and POls, types of POls and Places
are shown in the righthand column.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
( Park Street
Park Street ill Car park
' "l “(fl N
n N.
Park Street
Park swam
When you select an address from the list of search results, you can choose to show it on the map,
add a Crossroad or plan a route to that chosen location.
( HighStreet , Southwold
Show on mp w r (1 Cross Road li'lin' S
aobaaaawaa
000000000
t 000000 0 x
III-aw
32
If you show the result on the map, you can use the pop-up menu to add the location to My Places
or search near this location. If a route is already planned, you can add the location to your current
route.
( Park Street
Note: The best search results are shown on the map. When you zoom in, the lower ranked
search results are gradually shown.
About postcodes
When searching using a postcode, your results depend on the type of postcode used in the
country that you are searching in.
The following types of postcodes are used:
- Street postcodes navigate you to a street or part of a street.
- Area postcodes navigate you to an area comprising, for example, several villages in a rural
area or a district in a large city.
Street postcodes
Countries such as the Netherlands and the United Kingdom use this type of postcode. When you
search using this type of postcode, enter the postcode, then leave a space and then optionally
enter the house number. For example, "1017GT 35“. Your device then plans a route to a specific
house or building on a specific street.
Area postcodes
Countries such as Germany, France and Belgium use this type of area postcode. If you search
using an area postcode. your results include all the streets in a city district, the whole town, or the
villages within that postcode.
You may get results from multiple countries if you enter an area postcode.
Note: If you search using an area postcode, you will not get a single address in your results.
This type of postcode is still very useful in reducing the number of search results. For example, a
search for Neustadt in Germany returns a long list of possible results. Adding a space followed by
the area postcode narrows the results down to the Neustadt that you are looking for.
As another example, if you want to search in a city, enter an area postcode and select the city
centre you are searching for from the results.
33
About mapcodes
In countries where roads and houses have no names or addresses, you can use a mapcode
instead. A mapcode represents a location.
Every location on Earth, including those in the sea like islands and oil rigs, can be represented by a
mapcode. Mapcodes are short, and easy to recognise, remember and communicate. They are
precise to a few metres. which is good enough for everyday use.
Go to magcode.com for instructions on how to find the mapcode for a location.
Mapcodes are more precise and more flexible than the address on a business card. You can PICK
the location you want to associate with your address, for example, the main entrance or entrance
to a car park.
List of POI type icons
Legal and financial services
9‘
_\
fl Legal - Solicitors A Financial institution
Legal - other services
61'0
Food services
Court house Cash dispenser
[El
_ Convenience store _‘_ Fast food restaurant
1-H. =1
Chinese restaurant
a“
*. Restaurant
Accommodation
|._ Hotel or motel
Camping ground
in
Luxury hotel
Economy chain hotel
34
Emergency services
H Hospital or polyclinic
% Police station
a Doctor
Car-related services
Outside parking
6 Parking garage
OI!
Car dealer
Rental car facility
Rental car parking
Other services
I.
E Government office
E Company
Post office
Embassy
_l
35
Dentist
Veterinarian
Fire station
Petrol station
Car wash
Vehicle inspection centre
Electrical car charging
pointlsl
Car repair facility
Pet services
Telecommunication
Community service
Pharmacy
Education
LIE
Leisure
00
Y’
Sport
VIM
Shopping centre
Tourist information office
College or university
Library
Casino
Theatre
Cinema
Concert hall
Museum
Opera
Nightlife
Playing field
Mountain peak
lE-Bm
ii
(33134299
in
36
Beauty services
Shop
School
Convention centre
Winery
Tourist attraction
Zoo
Amusement park
Exhibition centre
Cultural centre
Leisure centre
Swimming pool
Watersports
Religion
5’
Travel
Beach
Park or recreation area
Yacht basin or marina
Stadium
Church
Railway station
Airport
Ferry terminal
Border crossing
Bus station
Toll gate
Rest area
City centre
37
Ten nis court
Ice skating rink
Sports centre
Golf course
Place of worship
Mountain pass
Scenic or panoramic view
Postcode
Residential area
Petrol station
Electrical car charging
stations
Truck stop
Planning a route
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to an address using search, do the following:
1. Select the Main Menu button to open the Main Menu.
r1
\)
2. Select Search.
The search screen opens with the keyboard showing.
3. Use the keyboard to enter the name of the place you want to plan a route to.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if
they are available. For example, press and hold the letter “e“ to access these characters: "3 e
e é e e“ and more...
< mm Slice?
H hStreeNBelmorrtl 1 Shopping centre
HIghStreetlllketshallSa Sn; 1 Argos
ngh Street (lken, Wood! 570 '
1 n
1 00000000 X
— 0°
You can search for an address, town, city, postcode or magcode.
Tip: To search for a specific street in the United Kingdom or the Netherlands, type in a post-
code, then leave a space and then type in the house number. For example, “1017GT 35“. For
other countries, postcodes are area-based and will give you a list of matching cities, towns
and streets in your search results.
38
Note: When searching, the whole map is searched. If you want to change how the search is
done, select the button to the right of the search box. You can then change where the search
is done, for example, to being along the route or in a city.
4. As you type the address, suggestions are shown based on what you have entered. You can
continue typing or select a suggestion.
Towns and roads are shown on the left, P0ls are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select an address suggestion.
< High sum :3: Donw‘i
5m. m. Map and tn
6. Enter the house number if you have one and haven't entered it already.
< l my: Sheet .3: Uonw‘i
Shaw. mi Map Md [1035 Rom)‘ t ‘34
7. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (H or a minus (r) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
39
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to a POI type or a specific POI using search, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Search.
The search screen opens with the keyboard showing.
3. Use the keyboard to enter the name of the place you want to plan a route to.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if
they are available. For example, press and hold the letter “e“ to access these characters: “3 e
e é e e“ and more...
< lef-
ResidenclalEllauvedal inn; Vi Restaurant
i3: Restarea
Rnsldentlal Vega Park n we
/ tar emu/garage
l x
1 00000000 x
—Eoo
You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Ala
ternatively, you can search for a specific POI, for example, “Rosie‘s Pizzeria".
Note: When searching, the whole map is searched. If you want to change how the search is
done, select the button to the right of the search box. You can then change where the search
is done, for example, to being along the route or in a city.
4. As you type, suggestions are shown based on what you have entered. You can continue
typing or select a suggestion.
Towns and roads are shown on the left, POls are shown on the right.
40
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select a POI type or an individual POI.
If you selected a POI type, select your chosen POI.
That (ate
Istanbul
Coffee pot
New Island stat tarry out .
Stomaway halh muse
_oo
7. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving. the guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Important: In the interest of safety and to avoid distractions while you are driving. you should
always plan a route before you start driving.
To plan a route using the map. do the following:
1. Move the map until you can see the destination that you want to navigate to. Here are some of
the gestures you can use to move the map:
- Pinch - to zoom, touch the screen with your thumb and a finger. Move them apart to zoom
in or move them together to zoom out.
- Double tap - to zoom in. double tap on the map.
- Drag - to scroll the map. touch the screen with a finger and move it across the screen.
- Flick - to scroll the map along way, flick the tip of a finger across the screen.
Tip: For a complete list of gestures, see Using gestures.
41
2. When you have found your destination on the map, select it by pressing and holding the
screen for about one second.
A poprup menu shows the nearest address.
3. To plan a route to this destination, select the drive button:
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
Tip: You can use the location you selected in other ways, such as adding it to My Places, by
selecting the pop-up menu button.
:3 S-{mi Nun Hr».-
‘ Sqmn
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information Qanel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stag to a route that you have already planned.
Tip: You can save a route using My Routes.
Planning a route using My Places
To navigate to one of My Places from your current location, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select My Places.
A list of all your Places opens.
( My Places
0 Home
| Retent destinations
t My restaurant
* My sport (lul)
Edl! LlSi
3. Select the Place you want to navigate to, for example Home.
Your chosen Place is shown on the map with a pop-up menu.
5 ( . Preview
43
4. To plan a route to this Place, select the drive button:
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Planning a route using coordinates
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using a pair of coordinates, do the following:
1. Select the Main Menu button to open the Main Menu.
{.3
2. Select Search.
The search screen opens with the keyboard showing.
3. Select the type of search button to the right of the search box.
4. Select Latitude Longitude.
The keyboard changes to a special keyboard for coordinate entry.
5. Type in your pair of coordinates. You can enter any of these coordinate types:
- Decimal values, for example, 51.508742 41.142822.
- Degrees, minutes and seconds, for example, N 51”30’31” W 0°08’34”.
- GPS standard coordinates, for example, N 51 30.525 W 0 08.569.
6. As you type in the coordinates, suggestions are shown based on what you have entered. You
can continue typing or select a suggestion.
Towns and roads are shown on the left, POIs are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
44
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
Select a suggestion for your destination.
Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the W is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (4—) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Planning a route using a mapcode
Important: In the interest of safety and to avoid distractions while you are dn ng, you should
always plan a route before you start driving.
To plan a route using a mapcode, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Search.
The search screen opens with the keyboard showing.
3. Type in your mapcode. You can enter any of these mapcode types:
- International, for example, WHGSL.TR10.
- Country-specific, for example, GBR 8MH.5‘|.
- Alternative country-specific, for example, GER 28.Y6VH or GBR LDGZ.VXFt.
Tip: All the mapcodes in this example are for the same location - Edinburgh Castle in the UK.
See About mapcodes for information on how to get a mapcode for a location.
4. As you type in the mapcode, suggestions are shown based on what you have entered. You
can continue typing or select a suggestion.
Towns and roads are shown on the left, POls are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
45
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
Select a suggestion for your destination.
6. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance View is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information oanel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stog to a route that you have already planned.
Tip: You can save a route using My Routes.
Planning a route in advance
You can plan a route in advance before you drive it. You can save the route as part of your My
Routes list.
To plan a route in advance, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Search.
The search screen opens with the keyboard showing.
Use the keyboard to enter the name of the location you want to use as a starting point.
Select an address or POI suggestion.
Select Show on Map.
P’WPE"
Select the pop-up menu button.
46
A pop-up menu shows a list of options.
7. Select Use as Starting Point.
8. Repeat the search steps to choose your destination, and then select the drive button in the
popup menu:
Your route is planned using your chosen starting point and destination. The estimated time of
arrival is shown at the top of the route bar.
Tip: If you don't want to use search to choose your starting point and destination, go to the
map view and press and hold to select a location.
Tip: Stops, POls, Places and the destination can all be selected as starting points using their
pop-up menus.
Changing the starting point to be your current location
1. Select the starting point of the route in the map view.
2. Select the popup menu button.
A pop-up menu shows a list of options.
3. Select Remove Starting Point.
Your route is replanned with your current location as the starting point.
47
Changing the starting point into a stop
1. Select the starting point on the route in the map view.
2. Select the pop-up menu button.
A pop-up menu shows a list of options.
3. Select Change to Stop.
Your route is replanned with the starting point changed into a stop.
Finding a car park
To find a car park, do the following:
1. Select the Main Menu button to open the Main Menu.
[03
2. Select Parking.
The map opens showing the locations of car parks.
If a route is planned, the map shows car parks near your destination. If a route isn‘t planned,
the map shows car parks near your current location.
48
You can change the screen to show a list of car parks by pressing this button:
You can select a car park from the list to locate it on the map.
Tip: You can scroll down the list of results using the scroll bar on the right hand side of the
second column.
Oosterdok
Piet heingarage 3130
s mm
Prins h drikka:
If you want to change how the search is done, select the button to the right of the search box.
You can then change where the search is carried out, for example, to search near you or the
whole map.
E: Cunentmap
0" © Nearme
fl: In town or city
3. Select a car park from the map or the list.
A poprup menu opens on the map showing the name of the car park.
4. To plan a route to your chosen car park, select the drive button:
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance view is shown automatically.
Tip: You can add a car park as a stop on your route by using the pop-up menu.
Finding a petrol station
To find a petrol station, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Petrol Station.
The map opens showmg the locations of petrol stations.
If a route is planned, the map shows petrol stations along your route. If a route isn‘t planned,
the map shows petrol stations near your current location.
You can change the screen to show a list of petrol stations by pressing this button:
You can select a petrol station from the list to locate it on the map.
50
Tip: You can scroll down the list of results using the scroll bar on the right hand side of the
second column.
4‘
O 03 meise
wmymt
Be
0 Shell station kriter 3
lllmglagr,
Q Shell station kritex )
mm. . l
If you want to change how the search is done, select the button to the right of the search box.
You can then Change where the Search is carried out, for example, to Search near you or the
whole map.
Current map
Near me
In town or Clly
3. Select a petrol station from the map or the list.
A pop-up menu opens on the map showing the name of the petrol station.
hnmmmmmm
+ mmm «m
.mg .
51
4. To plan a route to your chosen petrol station, select the drive button:
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the guidance View is shown automatically.
Tip: You can add a petrol station as a stop on your route by using the pop-up menu. A petrol
station that is a stop on your route has a blue icon.
52
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : IreneChung Create Date : 2014:01:16 17:41:22+08:00 Modify Date : 2014:01:17 17:22:28+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2014:01:17 17:22:28+08:00 Creator Tool : PDFCreator Version 0.9.5 Format : application/pdf Title : 06_User Manual_(4FC64_4FC54_4FC43).pdf Creator : IreneChung Document ID : uuid:5ce0e60e-44f2-498e-bee9-7a9154f9d3a5 Instance ID : uuid:323593fe-3cb2-4520-9936-37f23331c314 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 52EXIF Metadata provided by EXIF.tools