Tomtom Navigator 1B00050 Users Manual
NAVIGATOR TomTom_NAVIGATOR_US
1B00050 to the manual 3f7ae388-6270-4ba6-810e-6673252703f7
2015-02-02
: Tomtom Tomtom-Navigator-1B00050-Users-Manual-449918 tomtom-navigator-1b00050-users-manual-449918 tomtom pdf
Open the PDF directly: View PDF .
Page Count: 46
- Before You Start...
- Making your first trip
- Driving View
- Menus
- Finding alternative routes
- Using the Map
- Favorites
- Points of Interest
- Itinerary planning
- Preferences
- Use night colors / Use day colors
- Turn off 3D display / Turn on 3D display
- Safety preferences
- Safety lock
- Turn off map display
- Enable/disable POIs
- Turn off sound / Turn on sound
- Volume preferences
- Manage Favorites
- Change Home location
- Change Voice
- Change language
- Backlight preferences
- Keyboard preferences
- Manage maps
- Manage POIs
- Status bar preferences
- Change map colors
- Planning preferences
- Toll road preferences
- Compass preferences
- Set units
- Operate left-handed / Operate right-handed
- Name preferences
- Hide tips / Show tips
- Do not ask arrival time / Ask arrival time
- Reset factory settings
- TomTom Traffic
- TomTom PLUS
- Using TomTom HOME
- How Does Navigation Work?
- TomTom Limited Warranty
- Addendum
- Copyright notices
TomTom NAVIGATOR
Chapter 1
Before You Start...
2
Before You Start...
Installation
If you have purchased TomTom NAVIGATOR on a TomTom memory card,
insert the memory card in your device. Then go to step 4 below.
If you are installing TomTom NAVIGATOR from a DVD do the following:
1. Connect your device to your computer, or insert the memory card you are
using into a card reader/writer attached to your computer.
2. Insert the DVD in your computer.
3. Follow the instructions in the setup program.
When setup is finished, disconnect your device from your computer or
insert the memory card into your device.
4. Switch on your GPS receiver.
5. Launch TomTom NAVIGATOR by tapping or selecting the TomTom button
in your device menu.
You have to answer a few questions to set up TomTom NAVIGATOR. Answer
the questions by tapping the screen or by using the joystick.
Tap or select buttons
On devices with a touchscreen you tap buttons. On devices without a
touchscreen you select buttons. This user guide always refers to tapping
buttons.
On mobile phones, many buttons are numbered. You can select those buttons
using the number keys on your phone.
Activation
You will be asked how you want to activate the map that comes with
NAVIGATOR. There are two ways to do this:
• Automatically
To activate automatically, your device must have an active wireless data
connection (GPRS, EDGE, UMTS or CDMA).
Note: TomTom GPS receivers connect automatically when you start
TomTom NAVIGATOR. If you are using a different GPS receiver, refer to the
receiver’s user manual for instructions.
Note: Depending on your device, the images shown in this manual may
look different to the screen on your device.
3
Tap Automatic, then enter your product code. The product code is printed
on the product code card that is included with your product.
TomTom NAVIGATOR will connect to TomTom using the wireless data
connection and activate the map.
• Manually
To activate a map manually, do the following:
1. Tap Manual.
2. Go to this website: www.ttcode.com
3. Follow the instructions on this page to get an activation code.
4. Enter the activation code on your device to activate the map.
Once you have answered the questions and activated your map, NAVIGATOR
displays the Driving View. The Driving View is shown in black and white until
NAVIGATOR locates your current position.
For more information about the Driving View, see Driving View on page 10.
Locating your current position
Your GPS receiver must be outdoors to locate your current position. The first
time you start NAVIGATOR, it can take up to 5 minutes to find your current
position. If it takes longer than 5 minutes, make sure that you are in an open
place without tall buildings or trees around you.
In the future, your position will be found much faster, normally within a few
seconds.
Once NAVIGATOR has located your current position, the Driving View is
shown in full color and shows your position on the map.
Backup TomTom NAVIGATOR
It’s always a good idea to make a backup of the contents of your memory card.
You can make a backup using TomTom HOME.
For more information about TomTom HOME, see Using TomTom HOME on
page 40.
Drive safely
Now you are ready to get going. When you start to use NAVIGATOR, make
sure you always drive safely by using the Safety preferences in the
Preferences menu.
You can choose to use the safety lock. If the safety lock is enabled, only a few
buttons and features are available while you are driving. When you are
stationary, all the buttons and features are available.
You can also choose to turn the map display off.
For more information, see Safety preferences on page 29.
Note: TomTom NAVIGATOR does not transmit your position. You can,
however, send your position to TomTom Buddies. For more information, visit
www.tomtom.com/plus
Note: Some vehicles have a heat reflective shield embedded in the
windshield that may prevent TomTom NAVIGATOR from locating your
current position. If this is a problem in your vehicle, try placing your GPS
receiver in your rear window.
Chapter 2
Making your first trip
4
Making your first trip
Planning a route with TomTom NAVIGATOR is very simple. To plan your first route,
follow the steps below.
1. Tap the screen to bring up the main menu.
2. Tap
Navigate to...
For your first journey, we will navigate to an address.
3. Tap
Address
.
When you enter an address, you can choose from four options:
•
City center
- tap this button to set your destination as the center of a city or
town.
•
Street and house number
- tap this button to set an exact address as your
destination.
Note: You should always plan your journeys before you start driving. It is
dangerous to plan routes when you are already moving.
5
•
Postcode
- tap this button to enter a postcode as your destination.
•
Crossing or intersection
- tap this button to set your destination as the point
where two streets meet.
For your first trip, we will enter an exact address.
4. Tap
Street and house number
.
5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are
shown.
6. Start to type the name of the street.
As with the name of the town, the names of the streets that match what you
have typed are shown.
7. Now enter the house number of your destination and then tap
Done
.
8. NAVIGATOR asks you whether you need to arrive at a particular time.
Note: You can enter a zip code for any country. In the UK and the
Netherlands, zip codes are detailed enough to identify a house on their own.
In other countries you can enter a zip code to identify a town or area. You
will then have to enter a street and address.
6
Tap
YES
to enter an arrival time. NAVIGATOR shows you whether you will arrive
on time. For more information, see
Arrival times
on page 6.
The route is then calculated by your TomTom NAVIGATOR.
9. When the route has been calculated, tap
Done
.
TomTom NAVIGATOR will immediately start guiding you to your destination with
spoken instructions and visual instructions on the screen.
Arrival times
Tap
YES
to enter an arrival time.
Your NAVIGATOR calculates your arrrival time and shows you whether you will
arrive on time.
You can also use this information to work out when you need to leave. If your
NAVIGATOR shows you that you will arrive 30 minutes early, you can wait and
leave in 30 minutes time, rather than arrive early.
Note: Before you can plan a route in this way, TomTom NAVIGATOR must
first locate your current position.
7
Your arrival time is constantly recalculated during your trip. The status bar shows
whether you will arrive on time or late, as shown below:
What are the other navigation options?
When you tap
Navigate to...
, you can set your destination in many ways, not just
by entering the address. The other options are listed below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the
time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered, it
is shown in red.
Home
Tap this button to navigate to your Home location.
You will probably use this button more than any other.
For information about setting your Home location, see Change Home
location on page 31.
Favorite
Tap this button to select a Favorite as your destination.
For more information about Favourites, see Favorites on page 17.
Recent
destination
Tap this button to select your destination from a list of places you have
recently used as destinations.
Point of
Interest
Tap this button to navigate to a Point of Interest (POI).
For more information about POIs and navigating to a POI, see Points of
Interest on page 21.
Point on map
Tap this button to select a point on the map as your destination using the
map browser.
For more information about the map browser, see Using the Map on
page 14.
Latitude
Longitude
Tap this button to enter a destination with latitude and longitude values.
8
Planning in advance
You can also use your NAVIGATOR to plan trips in advance by selecting both your
starting point and your destination. You could, for example, do the following:
• Find out how long a trip is going to take before you start.
• Check the route of a trip you are planning.
• Check a route for someone who is coming to you and explain the route to them.
To plan a route in advance, follow these steps:
1. Tap the screen to bring up the main menu.
2. Tap
Advanced planning
.
3. Select the starting point for your trip in the same way as you would normally
select your destination.
4. Set the destination for your trip.
5. Choose the type of route that should be planned.
•
Fastest route
- the route which takes the least time.
•
Shortest route
- the shortest distance between the locations you set. This
may not be the quickest route, especially if the shortest route is through a
town or city.
•
Avoid freeways
- a route which avoids freeways.
•
Walking route
- a route designed for making the journey on foot.
•
Bicycle route
- a route designed for making the journey on a bicycle.
•
Limited speed
- a route for a vehicle which can only drive at a limited speed.
You have to specify the maximum speed.
6. Your TomTom NAVIGATOR plans the route between the two locations you
selected.
To mTom
Buddy
Tap this button to navigate to the current position of a TomTom Buddy. Don’t
forget that the Buddy may move before you reach him.
For more information about TomTom Buddies, see TomTom PLUS on
page 38.
Contact
Tap this button to navigate to the address of a contact on your device.
9
More information about a route
To find out about your route in detail, tap the
Details
button on the route summary
screen.
You can then select from the following options:
Browse as
text
Tap this button for a list of all the turn instructions on the route.
This is particularly useful if you need to explain a route to someone else.
Browse as
images
Tap this button to see each turn in the trip. Tap the right and left arrows to
move forwards and backwards through the trip.
Tap the screen to turn off the 3D display and view the map from above.
Browse map
of route
Tap this button to see an overview of the route using the map browser.
For more information about the map browser, see Using the Map on
page 14.
Show route
demo
Tap this button to watch a demo of the trip. You can interrupt the demo at
any time by tapping the screen.
Show route
summary
Tap this button to open the route summary screen.
Chapter 3
Driving View
10
Driving View
A
Buttons to zoom in and zoom out on your position (touchscreen devices only).
To zoom in and out on your position on devices without a touchscreen, push the
joystick up to zoom in, and push the joystick down to zoom out.
B
Your c urren t posi t ion.
C
The name of the next major road or road sign information, if applicable.
D
The next instruction.
This area shows you what to do and when you will have to do it.
Tap this area to repeat the last spoken instruction and to change the volume.
E
The name of the next street to turn onto.
F
Information about your trip.
Normally this area shows the remaining trip time, remaining distance, and
arrival time. To set which information is displayed, tap
Status bar preferences
in the
Preferences
menu.
G
Indicator of the strength of the GPS signal.
For more information about GPS, see
How Does Navigation Work?
on
page 42.
Chapter 4
Menus
11
Menus
Main menu
Tap the screen at any time when TomTom NAVIGATOR displays the Driving View
to open the Main Menu.
•
Navigate to...
Tap this button to start planning a route.
•
Find alternative...
Tap this button if you want to avoid part of your route, travel via a specific
location or calculate an alternative route.
•
TomTom Traffic
Tap this button to enable or disable traffic information. For more information,
see
TomTom Traffic
on page 36.
•
Add favorite
Tap this button to create a Favorite.
•
Change preferences
This button opens the Preferences menu. You can change many things about
the way TomTom NAVIGATOR looks and behaves. For more information, see
Preferences
on page 29.
Chapter 5
Finding alternative routes
12
Finding alternative routes
Once you have planned a route, you may want to change something about the
route, without changing your destination.
Why change the route?
Maybe for one of these reasons:
• You can see a roadblock or a line of traffic ahead.
• You want to travel via a particular location, to pick someone up, stop for lunch
or fill up with gas.
• You want to avoid a difficult intersection or a road you don’t like.
Find
alternative...
Tap Find alternative... in the Main Menu to change the route that is currently
planned.
Then tap one of the options below.
Calculate
alternative
Tap this button to calculate an alternative to the route already planned.
Your NAVIGATOR will look for another route from your current location to
your destination.
If you decide you would prefer to use the original route after all, tap
Recalculate original.
Why would I need to do this?
Apart from the roads near your position and near your destination, the new
route will use totally different roads to reach your destination. This is an
easy way of calculating a totally different route.
Avoid
roadblock
Tap this button if you can see a roadblock or a line of traffic ahead. You then
have to choose how much of the route ahead you want to avoid.
Choose from the different options: 100m, 500m, 2000m, 5000m. Your
NAVIGATOR will recalculate your route avoiding the section of the route for
the distance you selected.
Don’t forget that once a new route is calculated, you may have to turn off the
road you are on very soon.
If the roadblock suddenly clears, tap Recalculate original to return to your
original route.
13
Travel via...
Tap this button to change your route so that it passes a particular location,
perhaps to pick someone up on the way.
You choose the location you want to pass in the same way as you choose a
destination. So you can select from all the same options: for example,
Address, Favorite, Point of Interest and Point on map.
Your NAVIGATOR will calculate a new route to your destination that passes
the location you chose.
Using this button, you can only travel via one location. If you want to pass
more than one, use an Itinerary. For more information, see Itinerary
planning on page 26.
Recalculate
original
Tap this button to return to the original route without any deviations for
roadblocks or to travel via particular locations.
Avoid part of
route
Tap this button to avoid a part of the route. Use this button if you see that
your route includes a road or junction you don’t like, or which is well-known
for traffic problems.
You then choose the road you want to avoid from a list of the roads on your
route.
Minimize
traffic delays
Tap this button to recalculate your route so that it avoids traffic problems as
much as possible. Your NAVIGATOR will check if there are any traffic
problems on your route and work out the best route to avoid the problems.
For more information about using TomTom Traffic, see TomTom Traffic on
page 36.
Chapter 6
Using the Map
14
Using the Map
Every time you use your TomTom NAVIGATOR to plan a route, you are using the
map. However, you can use the map in many other ways.
To open the map, tap
Browse map
in the
Main Menu
.
Place your finger on the screen and drag it across the screen to move the map.
Alternatively, you can also move around the map by moving the cursor. Use the
joystick to move the cursor.
A
The scale bar
Move the handle on the scale bar to zoom in and out on the cursor position.
On devices without a touchscreen, you can zoom in and out on the cursor
position using the number keys. Use OK to zoom in. Use 0 to zoom out. Use 1 - 9
to select a set zoom level.
B
Your c urren t posi t ion
C
GPS button.
Tap this button to center the map on your current position.
D
The Options button
Use the Options button to set what is shown on the map.
On devices without a touchscreen, select the Options buttons to open the
Options menu. In the Options menu, you find the buttons which are not shown
Note: If you are using TomTom NAVIGATOR on a device without a
touchscreen, the map browser looks slightly different. There is no scale bar
and there are only two buttons: Options and Done. The Find and Cursor
buttons are part of the Options menu. Use the number keys to zoom. See
below for details.
15
in the map browser: the Find button and the Cursor button. You can also set
what is shown on the map and center the map on your GPS position.
E
The cursor
F
The Find button
Tap this button to find specific addresses and Points of Interest on the map.
G
The Cursor button
Tap this button to navigate to the cursor position, make a Favorite of the cursor
position, or find a Point of Interest near the cursor position. See below for more
information.
H
The zoom bar.
Change the scale of the map by moving the zoom bar up or down.
Using the Cursor button
You can use the map to find addresses and Points of Interest (POIs), for example,
restaurants, train stations and petrol stations.
With the Cursor button, you can use what you have found. Tap the Cursor button
to open the page of buttons shown below:
Navigate
there
Tap this button to navigate to the cursor position. Your NAVIGATOR will
calculate the route there.
Find POI
nearby
Tap this button to find a POI near the cursor position. For example, if you
have found a restaurant to go to, you can search for a parking garage
nearby.
Center on
map
Tap this button to reposition the map so that the current cursor position is in
the middle of the screen.
Add as
Favourite
Tap this button to create a Favorite at the cursor position.
For more information about Favorites, see Favorites on page 17.
Chapter 7
Favorites
17
Favorites
What are Favorites?
Favorites are places that you go often. You can create Favorites so that you don’t
have to enter the address every time you want to navigate there.
They don’t have to be places you like, just useful addresses.
How can I create a Favorite?
From the Main Menu, tap
Add favorite
.
You can then select the location of the Favorite from the list below.
Give your Favorite a name that is easy to remember. Your NAVIGATOR will always
suggest a name, usually the address of the Favorite. To enter the name, just start
typing. You don’t have to delete the suggested name.
Note: The button Add Favorite may not be shown on the first page of the
Main Menu. Tap the arrow to open other pages in the Main Menu.
Home
You can set your Home location as a Favorite.
Favorite
You cannot create a Favorite from another Favorite. This option will always
be unavailable in this menu.
To rename a Favorite, tap Manage Favorites in the Preferences menu.
For more information, see Manage Favorites on page 31.
Address
You can specify an address to be a Favorite. When you enter an address,
you can choose from four options. The same options as appear in the
Navigate to... menu:
•City center
•Street and house number
•Postcode (fully supported only in UK and the Netherlands)
•Crossing or intersection
Recent
destination
Select a Favorite location from a list of places you have recently used as
destinations.
18
Point of
Interest
You can add a Point of Interest (POI) as a Favorite.
Does it make sense to do this?
If you visit a POI you particularly like, for example a restaurant, you can add
it as a Favorite.
To add a POI as a Favorite, tap this button, then do the following:
1. Narrow your choice of POIs by selecting the area where the POI is.
You can select one of these options:
•POI near you - to search from a list of POIs near your current position.
•POI in city - to choose a POI in a particular town or city. You have to
specify a town or city.
•POI near Home - to search from a list of POIs near your Home location.
If you are currently navigating to a destination, you can also select from a
list of POIs which are on your route or near your destination. Choose one
of these options:
•POI along route
•POI near destination
2. Select the category of POI.
Tap the category of POI if it is shown or tap the arrow to choose from the
complete list.
Ta p Any POI category to search for a POI by name.
For more information about POIs, see Points of Interest on page 21.
GPS postion
Tap this button to add your current postion as a Favorite.
For example, if you see stop somewhere you like, while you are there you
can tap this button to create the Favorite.
Point on map
Tap this button to create a Favorite using the map browser.
Select the location of the Favorite using the cursor, then tap Done.
For more information about the map browser, see Using the Map on
page 14.
19
How can I use a Favorite?
You will normally use a Favorite as a way of navigating to a place without having
to enter the address. To navigate to a Favorite, do the following:
1. Tap the screen to bring up the main menu.
2. Tap
Navigate to...
3. Tap
Favorite
.
4. Select a Favorite from the list.
Your NAVIGATOR calculates the route for you.
5. When the route is calculated, tap
Done
.
Your NAVIGATOR will immediately start guiding you to your destination with
spoken instructions and visual instructions on the screen.
How many Favorites can I create?
You can create up to 48 Favorites. If you want to add more than 48, we suggest
that you make some POI categories and add some of your Favorites as POIs.
For more information about POIs, see
Points of Interest
on page 21.
How can I delete a Favorite?
1. Tap the screen to bring up the main menu.
2. Tap
Change preferences
to open the Preferences menu.
3. Tap
Manage Favorites
.
4. Tap the Favorite you want to delete.
5. Tap
Delete
.
How can I change the name of a Favorite?
1. Tap the screen to bring up the main menu.
Latitude
Longitude
Tap this button to create a Favorite by entering latitude and longitude values.
To mTom
Buddy
Tap this button to make a Favorite of the current position of a TomTom
Buddy.
For more information about TomTom Buddies, see TomTom PLUS on
page 38.
Contact
Tap this button to make a Favorite of the address of a contact on your
device.
Tip: Tap the arrow to move to the next page buttons.
20
2. Tap
Change preferences
to open the Preferences menu.
3. Tap
Manage Favorites
.
4. Tap the Favorite you want to rename.
5. Tap
Rename
.
Tip: Tap the arrow to move to the next page buttons.
Chapter 8
Points of Interest
21
Points of Interest
Points of Interest or POIs are useful places on the map. Here are some examples:
• Restaurants
•Hotels
•Museums
•Parking garages
• Gas stations
Showing POIs on the map
1. Tap
Enable/disable POIs
in the Preferences menu.
2. Select the POI categories to display on the map.
Tap
Find
to search for a POI by name.
3. Tap
Done
.
The POIs you selected are shown on the map as symbols.
Navigating to a POI
1. Tap the screen to bring up the main menu.
2. Tap
Navigate to...
in the Main Menu.
3. Tap
Point of Interest
.
4. Narrow your choice of POIs by selecting the area where the POI is.
Enable/
disable POIs
22
You can select one of these options:
•
POI near you
- to search from a list of POIs near your current position.
•
POI in city
- to choose a POI in a particular town or city. You have to specify
a town or city.
•
POI near Home
- to search from a list of POIs near your Home location.
If you are currently navigating to a destination, you can also select from a list of
POIs which are on your route or near your destination. Choose one of these
options:
•
POI along route
•
POI near destination
5. Select the category of POI:
Tap
Any POI category
to search for a POI by name.
Tap the category of POI if it is shown.
Tap the arrow to choose from the complete list of categories. Select the
category from the list or start to type the name of the category and select it
when it is shown in the list.
Once you have selected a POI, the route to the POI is calculated by your
To m To m N AV I G ATO R .
Managing POIs
Tap
Manage POIs
from the Preferences menu.
You can, for example, do the following:
• Create your own POI categories and add POIs to them.
• Set warnings when you get close to POIs.
Why would I want to create my own POIs?
A POI acts like a shortcut - once you have saved a location as a POI you never have
to type the address of that POI again. But when you create a POI you can save
more than just the location.
• Phone number - when you create a POI, you can save a phone number with it.
• Categories - when you create a POI you have to put it in a category.
Manage POIs
Note: The Manage POIs button is only available when all menu buttons are
shown. To show all menu buttons, tap Show ALL menu options in the
Preferences menu.
23
For example, you could create a category of POIs called ‘Favourite restaurants’.
With each POI, save their phone number so that you can call them from your
NAVIGATOR to reserve a table.
How can I create my own POIs?
1. Tap the screen to bring up the main menu.
2. Tap
Change preferences
.
3. Tap
Manage POIs
.
4. Before you can add a POI, you have to create at least one POI category. Every
POI is assigned to a POI category. You can only add POIs to POI categories you
have created yourself.
Tap
Add POI category
.
5. Enter a name for your POI category, for example, ‘Friends’ or ‘Favourite
restaurants’. Then select a marker for your POI category.
6. Tap
Add POI
.
7. Select the POI category you want to add the POI to.
8. Select the location of your POI from the list below.
Add POI
category
Add POI
Home
You can set your Home location as a POI.
If you want to change your Home location, you can create a POI of the Home
location before you change it.
Favorite
You can create a POI from a Favorite.
You can only create a limited number of Favorites. If you want to create
more Favorites you have to delete some Favorites first. Before you delete a
Favorite, make it into a POI so that you don’t lose the address.
Address
You can specify an address to be a POI. When you enter an address, you can
choose from four options. The same options as appear in the Navigate to...
menu:
•City center
•Street and house number
•Postcode (fully supported only in UK and the Netherlands)
•Crossing or intersection
Recent
destination
Select a POI location from a list of places you have recently used as
destinations.
Point of
Interest
You can add a Point of Interest (POI) as a POI. For example, if you are
creating a category of POIs for your favourite restaurants, use this option
instead of entering the addresses of the restaurants.
24
How can I set warnings for POIs?
1. Tap the screen to bring up the main menu.
2. Tap
Change preferences
.
3. Tap
Manage POIs
.
4. Tap
Warn when near POI
.
5. Select the category of POI you want to be warned about.
Select the category from the list or start to type the name of the category and
select it when it is shown in the list.
6. Set how close the POI should be when you receive a warning.
GPS postion
Tap this button to add your current postion as a POI.
For example, if you stop somewhere you like, while you are there you can
tap this button to create the POI.
Point on map
Tap this button to create a POI using the map browser.
Select the location of the POI using the cursor, then tap Done.
For more information about the map browser, see Using the Map on
page 14.
Latitude
Longitude
Tap this button to create a POI by entering latitude and longitude values.
To mTom
Buddy
Tap this button to make a POI of the current position of a TomTom Buddy.
For more information about TomTom Buddies, see TomTom PLUS on
page 38.
Contact
Tap this button to make a POI of the address of a contact on your device.
Note: The Manage POIs button is only available when all menu buttons are
shown. To show all menu buttons, tap Show ALL menu options in the
Preferences menu.
Warn when
near POI
25
7. Choose the warning sound for the category of POI you selected.
Chapter 9
Itinerary planning
26
Itinerary planning
What is an Itinerary?
An Itinerary is a plan for a trip with more stops than just your final destination.
An Itinerary is made up of the following items:
• Destinations - the end of a particular journey, the place where you want to stop.
• Waypoints - points on your journey that you want to pass.
Here’s an example of an Itinerary:
When would I use an Itinerary?
You could use an Itinerary for these kinds of trips:
• A road trip through a country with lots of stops.
• A two day car trip with an overnight stop.
• A short drive which passes particular Points of Interest.
In all these examples you could tap
Navigate to...
for each place. However, if you
use an Itinerary, you can save time by programming everything in advance.
Destinations are shown with this symbol.
Waypoints are shown with this symbol.
27
Creating an Itinerary
1. Tap the screen to bring up the main menu.
2. Tap
Itinerary planning
.
The Itinerary planning screen opens. At first, there are no items on the Itinerary.
3. Tap
Add
and select a location.
Following an Itinerary
When you use an Itinerary to navigate, the route will be calculated to the first
destination on the Itinerary. Your TomTom NAVIGATOR calculates the remaining
distance and time to the first destination and not for the whole Itinerary.
As soon as you start to use an Itinerary, the route is calculated from your current
position. You do not need to set a departure point.
When you have passed a waypoint or reached a destination, it is marked as visited.
Waypoints are shown on the map but your NAVIGATOR will not warn you when
you are approaching a waypoint, or tell you when you reach the waypoint.
Organizing an Itinerary
Tap an item on your Itinerary to open a page of buttons for editing the item. The
buttons shown below are available.
Itinerary
planning
Tip
You can add items to your Itinerary in any order and organize them into the
Itinerary later.
Mark as
waypoint
You can change a waypoint into a destination using this button.
Remember that waypoints are points on your journey to your destination
that you want to pass and destinations are places where you want to stop.
This button is only shown if the item you tapped is a destination.
Mark as
destination
You can change a waypoint into a destination using this button.
Remember that destinations are places where you want to stop, and
waypoints are points on your journey to your destination that you want to
pass.
This button is only shown if the item you tapped is a waypoint.
Mark ‘visited’
Tap this button to miss out part of your Itinerary. Your NAVIGATOR will
ignore this item and all the items before it in the Itinerary.
It will navigate you to the next item in the Itinerary.
This button is only shown if you are still due to visit this item.
Mark ‘to visit’
Tap this button to repeat part of your Itinerary. Your NAVIGATOR will
navigate you to this item followed by the rest of the items in the Itinerary.
This button is only shown if you have already visited this item.
28
Start Using an Itinerary
Tap
Options
, then tap
Start navigation
.
Once you have created an Itinerary, it’s a good idea to save it. To save an Itinerary,
tap
Save Itinerary
.
To load a saved Itinerary, tap
Load Itinerary
.
To create a new Itinerary, tap
New Itinerary
and to delete one, tap
Delete Itinerary
.
Move item up
Tap this button to move the item up the Itinerary.
This button is unavailable if the item is at the top of the Itinerary.
Move item
down
Tap this button to move the item down the Itinerary.
This button is unavailable if the item is at the bottom of the Itinerary.
Show on map
Tap this button to see the location of the item on the map.
For more information about the map browser, see Using the Map on
page 14.
Delete item
Tap this button to delete the item from the Itinerary.
Chapter 10
Preferences
29
Preferences
You can change many things about the way your TomTom NAVIGATOR looks and
behaves. Tap
Change preferences
in the Main Menu.
Use night colors / Use day colors
Tap this button to reduce the brightness the of the screen and use darker colors on
the map.
When should I use this?
When it’s dark outside, it’s easier to see the screen of your NAVIGATOR if it isn’t
so bright.
To change back to a brighter screen and brighter colors on the map, tap the button
Use day colors
.
Turn off 3D display / Turn on 3D display
Tap this button to view the map from above while you are navigating.
When you turn the 3D display off, you can choose whether the map should show
your direction of travel at the top, or keep north at the top. If you choose to keep
north at the top, the map will not move as your direction of travel changes.
To switch back to seeing the map from your perspective as you drive, tap
Turn on
3D display
.
When should I use this?
In some situations, it is easier to see the map from above. Perhaps if the roads are
very complicated or if you are walking and using your NAVIGATOR to navigate.
Safety preferences
Tap this button to set the following safety preferences:
•Safety lock
• Turn off map display
Safety lock
When you enable the safety lock, you are not able to access all buttons and
features of your NAVIGATOR while driving.
Use Night
colors
Use day
colors
Turn off 3D
display
Turn on 3D
display
Safety
preferences
30
The Main Menu shows only a few buttons that may be needed while you are
driving.
As soon as your car stops moving, you will be able to access all of the buttons and
features again.
Turn off map display
When you turn off the map display, instead of seeing your position on a map in the
Driving View, you will only see information about the next instruction.
When you tap this button, you have to specify when the map should be turned off.
These are the options:
•
Always
- you will only see information about the next instruction and arrows.
The map will never be shown.
•
Above a certain speed
- you set the speed at which the map is switched off.
When you are driving fast, the map can be distracting.
•
Never
- the map is never switched off.
Enable/disable POIs
Tap this button to set which categories of Points of Interest (POIs) should be shown
on the map.
Select the POIs that you want to see on the map from the list:
When you select a POI, it will be shown on the map by the symbol you can see
next to each category in the list above.
To find a category of POI quickly, tap
Find
, then start to type the name of the POI
category. As soon as the category is shown in the list, you can select it.
For more information about POIs, see
Points of Interest
on page 21.
Enable/
disable POIs
31
Turn off sound / Turn on sound
Tap this button to turn the spoken instructions off. The button changes to
Turn on
sound
. If you turn the sound off, warnings for upcoming POIs are also turned off.
Volume preferences
Tap this button to change the volume of the spoken instructions.
Manage Favorites
Tap this button to rename or delete Favorites.
To fi n d a Favori t e q u i c kl y, tap Find, then start to type the name of the Favorite. As
soon as the Favorite is shown in the list, you can select it.
For more information about Favorites, see
Favorites
on page 17.
Change Home location
Tap this button to set or change your Home location.
Do I have to have my actual home as the Home location?
Your Home location can be a place you go often, for example, your office. It
doesn’t have to be your actual home.
Why should I set a Home location?
Once you have set your Home location, you can navigate there quickly whenever
you need to get there. In the
Navigate to...
menu, just tap
Home
.
Change Voice
Tap this button to change the voice that gives you instructions.
Turn off
sound
Tip
To change the volume, tap Volume preferences in the Preferences menu. For
more information, see Volume preferences on page 31.
To change the volume quickly while you are driving, tap the bottom left-hand
section of the Driving View and move the slider.
To change the voice, tap Change Voice in the Preferences menu.
Volume
preferences
Manage
Favorites
Change
Home
location
Change Voice
32
Change language
Tap this button to change the language used for all the buttons and messages you
see on your NAVIGATOR.
You can choose from a wide range of languages. When you change the language,
you are also given the opportunity to change the voice.
Backlight preferences
Tap this button to set when the backlight is dimmed on your device while your are
using TomTom NAVIGATOR. The following options are available:
•
Always
•
On walking and bicycle routes
•
When not charging
•
Never
Keyboard preferences
Tap this button to select the size of the keys on the keyboard and the keyboard
layout. You can select from two sizes:
•
Large keyboard
•
Small keyboard
Three keyboard layouts are available:
•
ABCD keyboard
•
QWERTY keyboard
•
AZERTY keyboard
You use the keyboard to enter your destination or to find items in a list, like POIs.
Manage maps
Tap this button to do the following:
•
Download a map
- you can buy new maps using TomTom HOME. For more
information, see
Using TomTom HOME
on page 40.
•
Switch map
- tap this button to change the map you are using.
•
Delete a map
- tap this button to create more space on your NAVIGATOR by
deleting a map.
Change
language
Depending on your device, this button may not be available. On many
devices, the backlight preferences can be set in the operating system on the
device itself.
Backlight
preferences
Keyboard
preferences
Note: The keyboard does not include accents of any kind for any language
as you don’t have to enter letters with accents. Simply type the letter
without the accent and your NAVIGATOR will recognise it.
Note: This button is not available if you are using TomTom NAVIGATOR on
devices without a touchscreen.
Manage maps
33
Don’t delete a map unless you have already made a backup of the map. If you
delete a map before you make a backup, you won’t be able to put the map back
on your NAVIGATOR.
For more information about making a backup, see
Using TomTom HOME
on
page 40.
You can also download, add and delete maps using TomTom HOME.
Manage POIs
Tap this button to do the following:
• Set alerts for when you are near POIs.
For example, your NAVIGATOR can tell you when there is a gas station nearby.
• Create your own POI categories and add POIs to them.
For example, you could create a category of POIs called “Friends”, and add all
your friends’ addresses as POIs in the category.
For more information about POIs, see
Points of Interest
on page 21.
Status bar preferences
Tap this button to select the information shown on the status bar:
• Remaining time - the estimated time left until you reach your destination.
• Remaining distance - the distance left until you reach your destination.
• Arrival time - your estimated arrival time.
• Current time
• Street name - the name of the next street to turn on to.
• Speed - your speed.
If the speed limit for road you are on is available, it is shown next to your speed.
If you drive faster than the speed limit, your speed is shown in red.
When you first start your TomTom NAVIGATOR, the remaining time, remaining
distance, arrival time and the street name are shown.
Change map colors
Tap this button to select the color schemes used for day and night map colors.
You can also download more colour schemes from TomTom PLUS. For more
information, see the TomTom PLUS leaflet included with your product.
Manage POIs
Status bar
preferences
Note: If you enter an arrival time when you plan your trip, the current time is
not shown. For more information, see Arrival times on page 6.
Note: The speed limit information is included with the map and is not
available for all roads.
Change map
colors
34
Planning preferences
Tap this button to set the kind of route planned when you select a destination. The
following options are available:
•
Ask me every time I plan
•
Always plan fastest routes
•
Always plan shortest routes
•
Always avoid freeways
•
Always plan walking routes
•
Always plan bicycle routes
•
Always plan for limited speed
Toll road preferences
Tap this button to set how your NAVIGATOR handles toll roads if they are on the
route to a destination you set.
You can choose always to avoid toll roads, never to avoid toll roads or to be asked
what to do if a toll road is on the route planned.
If you set that your NAVIGATOR should ask you when there is a toll road on the
route, you are asked whether you want to avoid the toll road as soon as you plan
the route.
Compass preferences
Tap this button to select whether a compass is shown and what the compass
shows. The following options are available:
•
One with arrow pointing north
- the arrow always points north and the
direction you are moving is at the top of the compass.
•
One with arrow showing your heading
- the arrow always shows the direction
you are moving and the top of the compass is north.
If you select one of these options, you then choose what is shown in the middle
of the arrow:
•
Direction
- the direction in which you are driving is shown in the center of the
compass, as a compass direction.
•
Degrees
- the direction in which you are driving is shown in the center of the
compass, in degrees.
•
Nothing
•
One with arrow pointing to your destination
- the arrow always points to your
destination relative to the direction you are traveling. The distance to your
destination is shown in the middle of the arrow.
•
None
- no compass will be shown.
Set units
Tap this button to set the units used for the following:
•Distances
•Time
• Latitudes and longitudes
Planning
preferences
Toll road
preferences
Compass
preferences
Set units
35
•Temperature
•Air pressure
Operate left-handed / Operate right-handed
Tap this button to move important buttons, for example, the
Done
and
Cancel
buttons as well as the zoom bar, to the left hand side of the screen. This makes it
easier to tap the buttons with your left hand without blocking the screen.
To move the buttons back to the right hand side of the screen, tap
Operate right-
handed
.
Name preferences
Tap this button to set what is shown on the map in the Driving View. The following
options are available:
•
Show house numbers before street names
•
Show street names
•
Show next motorway / signpost
- when this option is selected, the next major
road on your route is shown at the top of the screen in the Driving View.
Hide tips / Show tips
Tap this button to stop your NAVIGATOR from giving you tips from time to time.
After you hide the tips, the button changes to
Show tips
. Tap this button to turn
tips on again.
Do not ask arrival time / Ask arrival time
Tap this button to stop your NAVIGATOR from asking you if you want to arrive by
a particular time whenever you plan a route.
To turn this option on again, tap
Ask arrival time
.
For more information, see
Arrival times
on page 6.
Reset factory settings
Tap this button to restore the factory settings to your TomTom NAVIGATOR. All
your settings, including Favorites, your Home location, warnings for POIs and any
Itineraries you have created, as well as recent destinations and recent calls and
callers, will be deleted.
Operate left-
handed
Note: This button is not available if you are using TomTom NAVIGATOR on
devices without a touchscreen.
Name
preferences
Hide tips
Do not ask
arrival time
Reset factory
settings
Chapter 11
TomTom Traffic
36
Tom Tom Tr aff ic
TomTom Traffic
TomTom Traffic is a TomTom PLUS service that sends up-to-date traffic
information to your NAVIGATOR. To use TomTom Traffic you must have a mobile
phone with Bluetooth and a wireless data connection, for example, GPRS, EDGE,
UMTS, CDMA.
TomTom Traffic takes the most up-to-date information from the best local sources.
Take advantage of the free trial to try TomTom Traffic. For more information, see
the TomTom PLUS leaflet.
Setting up TomTom Traffic
To receive TomTom Traffic, first establish a connection between your mobile
phone and your TomTom NAVIGATOR. Then do the following:
1. Tap
TomTom Traffic
in the Main Menu.
2. Tap
Enable Traffic
.
Using Traffic
When TomTom Traffic is enabled the Traffic bar is shown on the right-hand side of
the Driving View, as shown below:
Note: TomTom Traffic is not available in all countries or areas. Visit
www.tomtom.com/plus to check availability in your country.
37
TomTom Traffic will immediately try to retrieve the latest traffic information.
Updating traffic information
With TomTom Traffic, there are two ways to update the traffic information:
•Tap
Update traffic info
in the Traffic menu.
• Set Traffic to be updated automatically at regular intervals.
To do this, tap
Change Traffic preferences
in the Traffic menu. Select
Automatically update traffic info while on route
, then tap
Done
.
You are then asked if you want to limit how often Traffic is updated.
If you choose not to limit how often Traffic is updated, then TomTom will send
updated traffic information to your NAVIGATOR as soon as it is available.
If you choose to limit how often Traffic is updated, you are asked to set a time.
TomTom saves this time limit and sends new traffic information at the interval
you set. If there is no new traffic information, then TomTom will not send any
information to your NAVIGATOR. This saves you money by not using your
wireless data connection when there is no new information.
Using traffic information
Having up-to-date traffic information can help you to reduce your travel time.
Whenever you plan a route, the latest traffic updated you received from TomTom
is taken into account by your NAVIGATOR when it plans the route.
Your NAVIGATOR can also recalculate your route if the traffic situation changes
after you start a trip:
1. Tap
Change Traffic preferences
in the Traffic menu.
2. Select
Automatically optimize route after every update
.
After your NAVIGATOR gets new traffic information, it will automatically optimize
your route.
Note: TomTom Traffic retrieves traffic information from TomTom using a
wireless data connection on your mobile phone. You must be connected to
your phone and you must have a wireless data subscription with your
mobile network operator.
Note: The best route may be the same as the route originally planned.
Chapter 12
TomTom PLUS
38
Tom Tom P L U S
TomTom PLUS is a collection of services that keep you informed and entertained
while you’re on the road.
You can subscribe to a range of extras and download them either directly to your
NAVIGATOR or to your computer and then transfer them to your NAVIGATOR.
Tips
• New services are being added regularly. Use TomTom HOME or visit
www.tomtom.com/plus to find out what’s available.
• To download TomTom PLUS services to your NAVIGATOR, you need a
mobile phone with Bluetooth and a wireless data connection (GPRS,
EDGE, UMTS or CDMA). Your mobile phone company may charge you for
using a wireless data connection.
Don’t forget that you can download many TomTom PLUS services to your
computer without needing to set up a wireless data connection.
• Not all services are available in all countries. For more information, visit
www.tomtom.com/plus
Traffic
Get the fastest and most reliable updates from local sources.
Radar cameras
Be smart and stick to the speed limit.
Maps
Download detailed maps of many cities throughout the world or
even whole countries.
Voices
Get instructions from John Cleese and many other funny voices.
Buddies
Instant messaging and navigation meet on your NAVIGATOR.
Weather
Get weather forecasts for the next 5 days or check the current
weather at your destination.
39
Points of Interest
Find the places you need quickly with the locations of thousands
of Points of Interest (POIs).
Chapter 13
Using TomTom HOME
40
Using TomTom HOME
Using TomTom HOME, you can, for example, do the following:
• Make and restore backups of your TomTom NAVIGATOR.
• Manage the maps, voices, POIs and other extras on your NAVIGATOR.
• Read the full version of the user manual, available in 21 languages.
• Buy TomTom PLUS services and manage your subscriptions.
Installing TomTom HOME
To install TomTom HOME, insert the CD supplied with your NAVIGATOR into your
computer.
If the installation does not start, browse to the CD on your computer and double-
click the file
Install TomTom HOME
.
Connect your NAVIGATOR to your computer and switch it on.
Making a Backup
One of the most important things you can do with TomTom HOME is make a
backup of your TomTom NAVIGATOR.
1. Connect your NAVIGATOR to your computer and switch it on.
TomTom HOM E s t ar t s .
2. Click
Backup
under
Contents
.
3. Click
Backup
.
TomTom HOME makes a backup of your NAVIGATOR on your computer.
41
Restoring a Backup
If you ever have a problem with your NAVIGATOR, you can restore the backup.
Follow steps 1 and 2 above, then select the latest backup and click
Restore
.
The latest backup will be restored to your NAVIGATOR.
For more information, see the Help included with TomTom HOME.
Chapter 14
How Does Navigation Work?
42
How Does Navigation
Work?
Global Positioning System (GPS)
In order to navigate you to your destination, your TomTom NAVIGATOR must
know where you are now. To find your current position, your
TomTom NAVIGATOR uses the Global Positioning System (GPS). GPS is available
for free and without subscription.
GPS uses satellites to transmit signals to GPS receivers. Using the GPS signal, your
TomTom NAVIGATOR can work out where you are and how fast you are going.
GPS signals work in all weather, anywhere in the world.
Maps
Once your NAVIGATOR knows where you are and you have told it where you want
to go, it uses the digital map on the memory card to work out the best route to your
destination.
Note: Your TomTom NAVIGATOR does not transmit your position, so others
cannot use it to track you while you are driving. You can however send your
position to TomTom Buddies. For more information, visit
www.tomtom.com/plus
Chapter 15
TomTom Limited Warranty
43
TomTom Limited
Warranty
WARRANTOR
U.S. and Canadian Purchases: If you have made your purchase in the United
States or Canada, this Limited Warranty is granted by and this Limitation of
Liability is stipulated for the benefit of TomTom Inc., 150 Baker Avenue
Extension, Concord Massachusetts 01742 (United States of America).
WHAT THIS WARRANTY COVERS
1) TomTom Inc. ("TomTom") warrants to the original purchaser ("you") of the
hardware with which this Limited Warranty is included ("Hardware") that the
Hardware will be free from defects in workmanship and materials under
normal use ("Defects") for a period of two (2) years from the date that the
Hardware was first purchased by you ("Warranty Period"). During the Warranty
Period the Hardware will be repaired or replaced at TomTom's choice
("Limited Warranty") without charge to you for either parts or labour. This
Limited Warranty covers the replacement of the Hardware only. If the
Hardware is repaired after the Warranty Period has expired, the Warranty
Period for the repair will expire six (6) months after the date of repair.
WHAT THIS WARRANTY DOES NOT COVER
2) The Limited Warranty does not apply to normal wear and tear, does not
apply when the Hardware is opened or repaired by someone not authorized
by TomTom and does not cover repair or replacement of any Hardware or part
thereof damaged by: misuse, moisture, liquids, proximity or exposure to heat
and accident, abuse, non-compliance with the instructions supplied with the
Hardware, neglect or misapplication. The Limited Warranty does not cover
physical damage to the surface of the Hardware. This Limited Warranty does
not cover any software that may accompany or be installed on the Hardware.
HOW TO MAKE A WARRANTY CLAIM
3) In order to make a claim of a Defect, you must contact TomTom during the
Warranty Period at: 1-978-287-9555 or per email via www.tomtom.com to
explain the Defect and to obtain an RMA number (Return Materials
Authorization) if necessary. You must return the Hardware during the
Warranty Period, along with an explanation of the Defect, to the address
provided to you by TomTom. If a defect arises and a valid claim under this
Limited Warranty is received by TomTom after the first one hundred and
eighty (180) days of the Warranty Period, TomTom is entitled to charge you
for any reasonable shipping and handling costs made in connection with the
repair or replacement of the Hardware. You must comply with any other return
procedures stipulated by TomTom, if any.
YOUR LEGAL RIGHTS
4) This Limited Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state and jurisdiction to jurisdiction.
44
5) If any part of this Limited Warranty is held to be invalid or unenforceable,
the remainder of the Limited Warranty shall nonetheless remain in full force
and effect.
6) This Limited Warranty is the only express warranty made to you and is
provided in lieu of any other express warranties or similar obligations (if any)
created by any advertising, documentation, packaging, or other
communications.
7) Except for the Limited Warranty and to the maximum extent permitted by
applicable law, TomTom and its suppliers provide the Hardware "AS IS AND
WITH ALL FAULTS", and hereby disclaim all other warranties and conditions,
whether express, implied or statutory, including, but not limited to, any (if any)
implied warranties, duties or conditions of: merchantability, non-
infringement, quiet enjoyment, system integration, satisfactory quality, fitness
for a particular purpose, reliability or availability, accuracy or completeness of
responses, results, workmanlike effort, lack of viruses, and reasonable care
and skill, all with regard to the Hardware, and the provision of or failure to
provide support or other services, information, software, and related content
through the Hardware or otherwise arising out of the use of the Hardware. This
exclusion does not apply to (i) any implied condition as to title and (ii) any
implied warranty as to conformity with description. If applicable law requires
any implied warranties with respect to the Hardware, all such warranties are
limited in duration to ninety (90) days. Some states and/or jurisdictions do not
allow limitations on how long an implied warranty lasts, so the above may not
apply to you.
8) This Limited Warranty cannot be transferred to any other person.
LIMITATION OF LIABILITY
9) Neither TomTom nor its suppliers shall be liable to you or to any third party
for any indirect, incidental, consequential, special or exemplary damages
(including in each case, but not limited to, damages for the inability to use the
equipment or access data, loss of data, loss of business, loss of profits,
business interruption or the like) arising out of the use of or inability to use the
Hardware even if TomTom has been advised of the possibility of such
damages.
10) Notwithstanding any damages that you might incur for any reason
whatsoever (including, without limitation, all damages referenced herein and
all direct or general damages in contract or anything else), the entire liability
of TomTom and any of its suppliers shall be limited to the amount actually paid
by you for the Hardware.
11) Notwithstanding the above, neither party's liability for death or personal
injury resulting from its own negligence shall be limited.
12) Some states and/or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
Chapter 16
Addendum
45
Addendum
Important Safety Notices and Warnings
Global Positioning System
The Global Positioning System (GPS) is a satellite-based system that provides
location and timing information around the globe. GPS is operated and controlled
under the sole responsibility of the Government of the United States of America
which is responsible for its availability and accuracy. Any changes in GPS
availability and accuracy, or in environmental conditions, may impact the
operation of your TomTom NAVIGATOR. TomTom International B.V. and TomTom,
Inc. cannot accept any liability for the availability and accuracy of GPS.
Use with Care
Use of TomTom NAVIGATOR for navigation still means that you need to drive with
due care and attention.
SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA
California Vehicle Code Section 26708 (a) (1) provides that "No persons shall drive
any motor vehicle with an object or material placed, displayed, installed, affixed,
or applied upon the windshield or side or rear windows." Drivers in California
should not use a suction mount on their windshield, side or rear windows.
TomTom Inc. bears no responsibility for any fines, penalties or damage that may
be incurred by disregarding this notice. While driving in California, TomTom
recommends the use of its Alternative Mounting Kit, which includes options for
mounting TomTom devices on the dashboard and using the air vents. See
www.tomtom.com for more information about this mounting option.
Note: this section of the California Vehicle Code applies to anyone driving in
California, not just California residents.
This Document
Great care was taken in preparing this manual. Constant product development
may mean that some information is not entirely up-to-date. The information in this
document is subject to change without notice.
TomTom International B.V. shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting
from the performance or use of this material. This document contains information
protected by copyright. No part of this document may be photocopied or
reproduced in any form without prior written consent from TomTom International
B.V.
Chapter 17
Copyright notices
46
Copyright notices
© 2006 TomTom International B.V., The Netherlands.
Patents Pending. All rights reserved.
TomTom and the TomTom logo are registered trademarks of TomTom International B.V., The Netherlands. All
other trademarks are the property of their respective owners.
Our end user license agreement and a limited warranty apply to this product; they are included in this
package. You can also review both at www.tomtom.com/legal
Data Source
© 2006 Tele Atlas N.V. Based upon:
Topografische ondergrond Copyright © dienst voor het kadaster en de openbare registers, Apeldoorn 2006.
© Ordnance Survey of Northern Ireland.
© IGN France.
© Swisstopo.
© BEV, GZ 1368/2006.
© Geonext/DeAgostini.
© Norwegian Mapping Authority, Public Roads Administration /
© Mapsolutions. © DAV.
This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of
Her Majesty’s Stationery Office. © Crown copyright and/or database right 2006. All rights reserved. Licence
number 100026920.
Data Source
© 1984 – 2006 Tele Atlas North America. Inc. All rights reserved.
Canadian data © DMTI Spatial. Portions of Canadian map data are reproduced under license from Her
Majesty the Queen in Right of Canada with permission from Natural Resource Canada. Point of Interest data
by Info USA. Copyright 2006.