Tomy 52614TX27 JLX MicroDrive Radio Control User Manual 099 52614
TOMY International, Inc. JLX MicroDrive Radio Control 099 52614
Tomy >
Manual
Move joystick(s) as indicated by solid arrows. Vehicle will move in direction as indicated by outlined arrow.
SIMPLE SKILL LEVEL:
MODERATE SKILL LEVEL:
EXPERT SKILL LEVEL:
MAXIMUM
RAMP HEIGHT
24”
18”
MAXIMUM
RAMP HEIGHT
5”
MAXIMUM
RAMP HEIGHT
24”
DIRECTION CONTROLS
PROPER OPERATION AND STORAGE OF YOUR VEHICLE
TRICKS AND STUNTS (for outdoors only)
BATTERY REQUIREMENTS / INSTALLATION FOR VEHICLE
JLX MICRODRIVE
™
ACTION FEATURES
2-SIDED BODY DESIGN
HIDDEN INTERNAL
ANTENNA FOR
LONG RANGE
ACTION
RUBBER TIRES FOR
MASSIVE
SUPER BOUNCE
ACTION!
SUPER-GRIP TIRE
TREAD FOR
BETTER OFF-
ROAD TRACTION
DUAL AWD
MEGA-TORQUE
ACTION
BATTERY REQUIREMENTS / INSTALLATION FOR TRANSMITTER
1. Remove battery cover as shown and install
(2) AAA / LR03 1.5 Volt batteries. Replace
cover. Move power button “ON” and the red
LED light will come on. This will show you
that the battery is good and the transmitter
is ready for operation. PLEASE NOTE: Vehicle
power switch must be in the “ON” position
to receive commands from the transmitter.
2. Change batteries when LED is dim or not on.
SAFETY PRECAUTIONS (Keep manual for future reference)
This vehicle is not recommended for children under the age of 6 years. Please read all of the instructions before operating this
vehicle. Always follow general safety rules while operating vehicle: avoid hitting pets, furniture or people. Do not pick up vehicle
while it is in motion, keep hands, hair and clothing away from this vehicle when the power switch is turned to the “ON” position.
Remove batteries when vehicle is stored. Avoid tire contact on painted or varnished surfaces.
The JLX MICRODRIVE™ is built with an automatic shut-off function if the vehicle reaches excessive temperature during
operation. If the vehicle stops after prolonged period of operation, turn off vehicle and controller, remove batteries from vehicle
and cease operation for ten (10) minutes. Reinsert batteries and resume play.
®
CONFORMS TO THE SAFETY
REQUIREMENTS OF ASTM F963.
Part of the “R”US Family of Brands.
Customer Infomation:
Color and contents may very from
item shown. Where applicable,
remove all packing before giving this
item to your child.
FAST LANE is a mark of Geoffrey, LLC,
a subsidiary of Toys“R”Us, Inc.
© 2011 Geoffrey, LLC
Made in China
Distributed in the United States by
Toys“R”Us, Inc., Wayne, NJ 07470
Distributed in Australia by
Toys“R”Us (Australia) PTY Ltd.
Regents Park NSW 2143
www.toysrus.com
Do not mix old and new batteries.
Do not mix alkaline, standard
(carbon zinc), or rechargeable
(nickel-cadmium) batteries.
NOT INCLUDED
5. Avoid operating around CB radios, high voltage electrical wires and large
steel-reinforced concrete buildings.
6. Avoid running your vehicle and another vehicle on the same frequency.
7. DO NOT use in salt water.
8. Vehicle and transmitter are not waterproof. Do not immerse or use in water.
1. Best operation of vehicle is on a textured paved surface.
2. Always operate your vehicle within a range of 50 feet from you.
3. Always operate your vehicle on dry surfaces away from cars and other full-size vehicles.
4. Always store your vehicle in a cool, dry place and off of painted or varnished surfaces.
Here are a few of the exciting tricks and stunts you can do. The following tricks and stunts take practice and skill. Attempt simple skill level tricks before
going on to more advanced tricks. Remember you will need to practice to achieve these stunts.
FCC NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
U.S. FCC Warning:
Changes or modifications to this unit not expressly approved by the party respon-sible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
“Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.”
Carrier frequency and field strength
Frequency Channel: 27.145 MHz
27.145 MHz Field Strength: 68.7 dBµv/m @ 3m.
WHEELIE FLIP
6. While running the car with the drive
wheels in front, quickly reverse both
control buttons. This should cause
the car to flip. (To identify drive
wheels, hold car off of ground.
Move control button and drive
wheels will spin.)
REVERSE RAMP FLIP
4. Build a semi-circular ramp
24 inches high and run the
car through it.
BARREL ROLL
5. While driving the car straight at
full speed, make a sudden turn
causing the car to roll. Too
sharp of a turn will cause
the car to spin instead
of roll.
1. On the vehicle bottom, using a Phillps screwdriver
(not included), loosen screw and remove the
battery cover.
2. Insert (4) piece new AAA/LR03 1.5 Volt batteries.
3. Replace battery cover and tighten screw.
4. Turn power switch to the “ON” position.
NOTE: for best performance, use of alkaline batteries
is recommended.
STANDARD RAMP JUMP
1. Drive car up a ramp no
higher than 24 inches.
VERT RAMP
2. 1/4 Pipe Verticle Ramp.
WALL FLIP
3. Run car up a 5 inch high ramp and
onto a wall causing the car to flip.
• Non-rechargeable batteries are not to be recharged;
• Rechargeable batteries are only to be charged under adult supervision;
• Rechargeable batteries are to be removed from the toy before being charged;
• Different types of batteries or new and used batteries are not to be mixed;
• Batteries are to be inserted with the correct polarity(+ and -);
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries;
• Exhausted batteries are to be removed from the toy;
• The supply terminals are not to be short-circuited;
• Only use the batteries recommended by the manufacturer or batteries of an
equivalent type;
• Please remove from the toy if it is not to be used over a longer period;
• Protect the environment: Bring used batteries to a special collecting point!
Thank you!
HARDENED STEEL
AXLES FOR ADDED
STRENGTH.
To operate your transmitter you will need
(2) AAA / LR03 1.5 Volt batteries (not
included). NOTE: for best performance, use
of alkaline batteries is recommended.
• FULL-THROTTLE, MAXIMUM-SPEED OPERATION
• SCALE SPEEDS OVER 300 MPH
• UP TO 50-FEET EFFECTIVE RANGE
FORWARD
SLOW
RIGHT TURN
FORWARD
SLOW
LEFT TURN
FORWARD
HARD
RIGHT TURN
HARD
LEFT TURN
REVERSE
SLOW
RIGHT TURN
BACKWARD
SLOW
LEFT TURN
BACKWARD
Cut line Folder line
099-52614
size: 297mm”(L) X 420mm”(W)
Material: 100gsm + woodfree paper
worked by Fai So Date: Sep/30/2011 English version