Tomy LC98750 RFID Reader User Manual IS

TOMY International, Inc. RFID Reader IS

User Manual

Play features:
Note: Only Talking Railway Series Engines will be recognized by name at Talking Railway Series destinations.
Instructions for Use:
099-LC98750
SKU# LC98750
How to distinguish a Talking Railway Series Engine:
Look for engines with gold magnets, gold lettering on the chassis, and
a gold top hat. These engines can receive personalized greetings from
Sir Topham Hatt at Talking Railway Series destinations!
© 2008 Learning Curve Brands, Inc.
Oak Brook, Illinois 60523-1940 U.S.A.
Made in China. All Rights Reserved.
1. Red lever controls stop and go signal.
2. Push red button to reveal or hide Sir Topham Hatt.
3. If Sir Topham Hatt is visible: Push Talking Railway Series vehicle
through/past station to receive personalized greetings from
Sir Topham Hatt.
4. If Sir Topham Hatt is behind the closed door: Push Talking Railway
Series vehicle through/past destination to receive special engine
sound effects
How to Use with Traditional Engines: Talking Railway Series destinations will work with traditional engines and vehicles also.
1. If Sir Topham Hatt is visible: Push traditional vehicle through/past destination to receive non-personalized greetings from
Sir Topham Hatt.
2. If Sir Topham Hatt is behind the closed door: Push traditional vehicle through/past destination to receive special sound effect.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
In the European market, the dustbin symbol indicates that batteries, rechargeable batteries, button cells, battery
packs, etc. must not be put in the household waste. Batteries containing hazardous substances are harmful to the
environment and to health. Please help to protect the environment from health risks and tell your children to
dispose of batteries properly and take them to the local collecting points. Batteries are recycled safely in this
manner. The chemical symbols Hg (Mercury), Cd (Cadmium) or Pb (Lead) shown on the dustbin symbol indicates
that the content of that chemical exceeds a certain limit.
To Replace Batteries:
• Locate battery box on underside of the Stop and Greet Station.
• Using a Phillips-head screwdriver (not included), remove
battery box cover and set aside .
• Replace the old batteries with three (3) new 1.5V AAA
batteries.
• Replace battery box cover and tighten screw.
Battery Tips:
• Always install and change batteries under adult supervision.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision.
• Only use batteries of the same or equivalent type as recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the toy and dispose of properly.
• Do not short-circuit the supply terminals.
• Do not mix different types of batteries or new-and-used batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
• Rechargeable batteries are to be removed from the toy before being charged.
Caution: For best electronic performance, do not play with toy on a metal surface.
10”x7” Front
099-LC98750
Size: 10”(H) X 7”(W);
Material: 100gsm woodfree paper;
Date: July/22/2008
10”x7” Back

Navigation menu