Tonika Electronics Technology TA-387 Bluetooth Speaker User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2258178
Application ID	cmie+7KQWbQkr6TNj278pg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	244.86kB (3060759 bits)
Date Submitted	2014-05-05 00:00:00
Date Available	2014-05-05 00:00:00
Creation Date	2014-04-27 21:35:04
Producing Software	PDF Editor - Foxit Software
Document Lastmod	2014-04-27 21:35:04
Document Title	Manual
Document Author:	Test

Size:148x210MM
OPERATION:
POWER SOURCE
PORTABLE
PORTABLE BLUETOOTH
BLUETOOTH SPEAKER
SPEAKER
WITH
WITH AMPLIFIER
AMPLIFIER
This unit can be powered by either AC power or built-in rechargeable battery.
AC Operation:
To operate the unit using AC power:
1. Connect the small plug from the supplied AC power cord to the AC Jack on the rear of unit.
2. Plug the AC power cord to the AC wall outlet having AC 120V~, 60Hz.
3. Press the Power Switch on the rear of unit to POWER ON position to power on the unit.
4. When finished, press the Power Switch to POWER OFF position to shut off the unit.
17
12
13
14
15
16
TO AC IN JACK
BT (Blue Tooth):
1. Power on the unit as previous procedures.
2. Press the SOURCE Button repeatedly until the BT Indicator is light.
3. If this is the first time to use BT or re-pairing the unit to a new BT device, pairing the unit to
external BT device as bellows:
i. Power on the external BT device and enter to searching mode.
ii. Start pairing as the on screen instructions on the external BT device.
iii. After paired, the BT Indicator will stop blinking (For details pairing procedures, please
refer to the user’s manual of your BT device.).
Notes:
● When the external BT device searched the unit, our model number “CHT 936” will
appears on the display of external BT device.
● Pairing code “0000” may need to enter.
4. Normal operation after paired:
i. Turn on the BT function of the external BT device.
ii. Power on the unit and press the SOURCE Button repeatedly until the BT Indicator is light
and blinking.
iii. Wait a few seconds until the unit paired to the external BT device automatically. (The BT
Indicator will stop blinking).
iv. Plays the music in the connected BT device as usual.
CHARGE
Model name:TA-387
19 IC warning:
Before using the unit, be sure to read all operating
instructions carefully. Please note that these are general
precautions and may not pertain to your unit For example,
this unit may not have the capability to be connected to an
outdoor antenna.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
1. Read these instructions
All the safety and operating instructions should be read
before the product is operated.
2. Keep these instructions
The sately and operating instructions should be retained
for future reference.
Notes:
A. In Power on mode, the battery will not be recharge. Always press the Power Switch to CHARGE position
to recharge the battery.
B. For charging first time, charge it approximate 10 hours.
C. Recharge and store the device within the temperature range to 5°C~35°C (40°F~95°F).
D. Do not overcharges (longer than 24 hours). Excessive charging or running the unit until battery goes
empty will damage battery. Battery life will be extended if you keep the battery fully charge.
E. Battery life naturally shortens slowly over time.
F. The rechargeable battery incorporated in this product is not user replaceable.
G. If long period of time will not use, unplug the AC power cord from wall outlet.
1. Power Indicator
2.
BT (Blue Tooth) Indicator
3. FM Indicator
4. AUX 1 Indicator
5. AUX 2 Indicator
6.
Charging Indicator
7. SOURCE Button
8. SCAN /
(Radio Scan/Play-Pause) Button
9. CH - /
(Channel Down/Skip Backward) Button
10. CH + /
(Channel Up/Skip Forward) Button
11. EQ (Equalizer) Button
12. Volume Knob
13. MIC VOL (Microphone Volume) Knob
14. MIC ECHO (Microphone Echo) Knob
15. AUX 1 Jack
16. MIC (Microphone/Electric Guitar) Jack
17. Carry Handle
18. AUX 2 Jacks
19. POWER ON/POWER OFF/CHARGE Switch
20. AC IN Jack (AC 120V~; 60Hz)
OPERATION:
General:
1. Power on the unit as previous procedures.
2. Press the SOURCE Button repeatedly to select the source as desire (When change the input
source from BT or to BT mode, it needs take approximate 1 second, please wait.).
3. Turn the VOL (Volume) Knob to adjust the volume level as desire.
4. Press the EQ (Equalizer) Button repeatedly to set the preset equalizer mode as desired.
Notes:
~ EQ is operation in BT mode only.
~ To reset the EQ mode to normal mode, power off then power on the unit.
5. When finished, press the Power Switch to POWER OFF position to power off the unit.
Note: If long period of time will not use the unit, unplug the AC power cord from wall outlet.
18
20
19
CHARGE
Radio:
1. Power on the unit as previous procedures.
2. Press the SOURCE Button repeatedly until the FM Indicator is light.
3. If first time to use (or replaced the unit in a new location), press the SCAN/
Button. The unit
will start searching and stored all available FM stations automatically. (Up to 30 stations can be stored).
4. After scanning, press the CH +/
or CH -/
Button repeatedly to select the desired stored
FM station.
Microphone:
1. Connect the supplied External Microphone to the MIC Jack on the top of unit as the figure below:
TROUBLESHOOTING GUIDE
Check the follows before requesting service:
SYMPTOM
No power
AUX 1
POSSIBLE CAUSE
POSSIBLE SOULTION
AC Power Cord had not
plug in the unit or wall outlet
Plug it to the wall outlet and the
unit properly
POWER Switch is in OFF
Press the POWER Switch on
position
the rear of unit to POWER ON
position
Built-in recharge battery
consume
Recharge the built-in battery
as page 5
Volume in minimum position
Rise volume level by turning
the VOL (Volume) + Knob
The connected device is not
in playback mode
Plays the audio/video files in
the connected device as usual
Sound output of the
Rise the volume level of the
connected device weak
connected device
Input source incorrect
Set the input source as the
connection
Volume level too high
Reduce the volume level by
turning the VOL (Volume) - Knob
Volume level of the
connected device too high
Reduce the volume and/or bass
level of the connected device
Dynamic Microphone Included
ipad, discman
10 11 6 5 4
To Wall Outlet
Operation by Built-in Rechargeable Battery:
The unit has a built-in rechargeable battery, recharge it before use as below:
1. Connect the small plug from the supplied AC power cord to the AC Jack on the rear of unit.
2. Plug the AC power cord to the AC wall outlet having AC 120V~, 60 Hz.
3. Press the Power Switch on the rear of unit to CHARGE position to start charging, the Power ON and
Charging indicators on the top of unit will light. When the battery is fully charged, the Charging indicator
will turn off.
4. After charge, disconnect the AC power cord from wall outlet. Press the Power Switch on the rear of unit
to POWER ON position to power on the unit. (If the AC power cord is connecting to wall outlet, the unit
will select to using AC power automatically).
5. When finished, press the Power Switch to POWER OFF position to shut off the unit.
AUX 1:
1. Connect the external Audio Device (such like MP3 Player; CD Discman; iPod/iPhone/iPad … etc)
by the supplied audio connection cable as the figure below:
2. Power on the unit as previous procedures.
3. Press the SOURCE Button repeatedly until the AUX 1 Indicator is light.
4. Plays the audio files in the connected Audio device as usual. (Note: Make sure the volume level
of the connected device is in high level. Otherwise, sound from this unit is weak.)
2.
3.
4.
5.
Power on the unit and selected the input source as previous procedures.
Turn the MIC VOL (Microphone Volume) Knob to adjust microphone volume level as desire.
Turn the MIC ECHO (Microphone Echo) Knob to adjust echo effect as desire.
Speak or sing into the microphone. If fit back sound (high frequency audio noise) was heard from
the speaker, reduce the microphone volume or keep the microphone away from speaker.
No Sound
Electric Guitar:
1. Connect the Electric Guitar (not supplied) to the MIC Jack on the top of unit as the figure below:
AUX 2:
1. Connect the external AV Device (such like TV/DVD/VCR/DVR … etc) as the figure below:
Sound distortion
Electric Guitar (not Included)
CHARGE
2. Power on the unit and selected the input source as previous procedures.
3. Turn the MIC VOL (Microphone Volume) Knob to adjust the sound level of Electric Guitar as
desire.
4. Turn the MIC ECHO (Microphone Echo) Knob to adjust echo effect as desire.
5. Plays the Electric Guitar as usual. If fit back sound (high frequency audio noise) was heard from
speaker, reduce the microphone volume.
BT not function
Built-in battery cannot
be recharge.
The external BT device too
Place the external BT
far from the unit
device close to the unit
The Power Switch has not
press to CHARGE position.
Press the Power Switch to
CHARGE position.
GENERAL SPECIFICATIONS:
LIMITED WARRANTY
Power Source: ……………………………………………………AC 120V~, 60Hz; 0.5A
Radio FM Band Coverage: ………………………………………………… 87.5-108MHz
BT Effective Range: ………………………………………… Up to 32 Feet in open area
Audio Power: ……………………………………………………………………………20W
Accessories:
1 x User’s Manual
1 x Audio Connection Cable with 3.5mm Stereo Mini Plugs
1 x AC Power Cord
1 x Dynamic Microphone
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $18.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
Carry Handle:
Press the button on the handle then pull it out. When finished, press the button then push it back as
the figure below:
To Obtain Service on your Product
email:service@craigelectronics.com
2. Power on the unit as previous procedures.
3. Press the SOURCE Button repeatedly until the AUX 2 Indicator is light.
4. Plays the video files in the connected AV device as usual. (Note: Make sure the volume level of
the connected device is in high level. Otherwise, sound from this unit is weak.)
Printed in China
CHT936_WC_E0FG1_V0US
VEUILLEZ LIRE AVANT DE FAIRE FONCTIONNER CET APPAREIL.
Modèle: CHT936
Size: 148.5(W) x 210(H)mm (A5)
POR FAVOR LEA ESTE MANUAL ANTES DE UTILIZAR ESTE EQUIPO.
Modelo: CHT936

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Producer                        : PDF Editor   - Foxit Software
Author                          : Test
Create Date                     : 2014:04:27 21:35:04
Modify Date                     : 2014:04:27 21:35:04

EXIF Metadata provided by EXIF.tools