Tonika Electronics Technology TA-490-01 Bluetooth Speaker User Manual TA 490

Download:
Mirror Download [FCC.gov]
Document ID	2779150
Application ID	3UDtyvP79Cn6nlpk/O2sTw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.31kB (291392 bits)
Date Submitted	2015-10-12 00:00:00
Date Available	2015-10-12 00:00:00
Creation Date	2015-10-10 17:34:10
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2015-10-10 17:34:10
Document Title	Microsoft Word - TA-490说明书
Document Creator	PScript5.dll Version 5.2.2
Document Author:	francis.zhang

FCC INFORMATION:
This equipment has been tested and no found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not used these
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment of and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio radio/TV technician for help.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. Modifications not authorized by the manufacturer may
void users authority to operate this device.
Note:
Refer all servicing to qualified service personnel. Servicing is required when the unit has
been damaged any way such as the following: the power‐supply cord or plug has been
damaged, liquid has been spilled in to the unit, the unit has been exposed to rain or
moisture, the unit has been dropped or the unit does not operate normally.
1. The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquid, such as vases, shall be place on the apparatus.
2. Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall reaily operable.
Battery Recharge
The unit has a built in Li‐ion rechargeable battery, recharge it before use as follow:
 Connect the Mirco USB plug from the USB Connection Cable to the Micro USB Port on
the rear of unit.
 Connect the full size USB plug to the USB port on a computer or any USB charger having DC
5V output. (During charging, the Red Indicator will illuminate. When finished, it will
turned off).
Notes:
Your battery will last longer if you following these simple guidelines for charging and
storing.
A. Recharging and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
B. Do not over charge (longer than 24 hours). Excessive charging or running the unit until
battery goes empty will damage battery.
C. Battery life naturally shortens slowly over time.
D. The rechargeable battery incorporated in this product is not user replaceable.
Location of Controls:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Button
 Button
 Button
Button
Indicators
Built‐in Microphone
Micro USB Port (For charge only)
USB Port
TF (SD) Card Slot
AUX (in) Jack
Reset Button (Inside the AUX in Jack)
OPERATON:
General operation:
1.
2.
3.
4.
5.
Press and hold the
Button approximate 0.5 second to turn it on.
Button repeatedly until the desired mode hearing from speaker as
Press the
below:
 Blue tooth ready for connection
 Blue tooth connected
 Radio
 Line in ( =Aux in )
 USB
 Memory Card
Press and hold the  or  Button to adjust volume level.
In BT; TF (SD) Card and USB Device playback mode:
 Press and release the  or  Button repeatedly to skip tracks.
Button to pause; press again to resume normal playback.
 Press t the
Button to shut off.
When finished listening, press and hold the
BT (Bluetooth) mode
The first time you use the speaker or pair it to a new Bluetooth device, please follow
these instruction:
1. Power on the unit as previous procedures.
Button repeatedly until “Blue tooth ready for connection” hear from
2. Press the
speaker. The Blue Indicator will light and blinking.
3. Power on the external Bluetooth Device and enter searching mode. Start paring
following the on screen instructions from the external Bluetooth device. After pairing,
“Blue tooth connected” will hear from speaker and the Blue Indicator will stop blinking.
Notes:
 When the external BT player searched the unit, our model number “CMA3581” will
appear on the display of the external Bluetooth Device.
 Pairing code “0000” may need to enter.
Normal operation after pairing:
1. Power on the unit as previous procedures.
Button repeatedly until “Blue tooth ready for connection” hear from
2. Press the
speaker. Wait a few second until“Blue tooth connected” hear from speaker and
the Blue Indicator stop blinking.
3. Plays the music in the connected Bluetooth Device as usual.
Radio:
1. Power on the unit as previous procedures. Press the
Button repeatedly unit
“Radio” hear from the speaker.
2. Press the
Button to searching and stored the available FM stations. During
searching, the Blue Indicator will blink. When finished searching, the Blue Indicator will
stop blinking.
3. Press and release the  or  Button repeatedly t plays the previous/next available FM
station.
FM Antenna:
The FM Antenna is built in the unit. If reception is weak, relocation or redirection the unit to improve
the radio reception
USB Device playback mode:
1.
In power off mode, insert the USB Device into the USB Port on the rear of unit as the
figure below:
2.
Power on the unit as previous procedures. Press the
Button repeatedly unit “USB”
hear from speaker. The unit will start playback the music on the USB Device
automatically.
TF (SD) Card playback mode:
1.
In power off mode, insert the TF (Micro SD) Card into the TF (Micro SD) Card Slot on
the rear of unit as the figure below:
2.
Power on the unit as previous procedures. Press the
Button repeatedly unit
“Memory card” hear from speaker. The unit will start playback the music on the TF
(Micro SD) Card automatically.
NOTES:
 Up to 16 GB USB Device (not included) or TF (Micro SD) Card (not included) the unit
support to play.



Before replacing USB Device or TF (Micro SD) Card, make sure the unit has been
powered off.
When inserting the USB Device or TF(Micro SD) Card, make sure the direction you
selected is correct. Never insert violently to avoid damaging the USB Device or the unit.
If it doesn’t work, please check if the direction is correct.
You also need to download the desired music in MP3 format into the USB Device
and/or TF (SD) Card before installing into the unit.
AUX IN:
To listening from the external Audio players such like MP3 Player, Discman …etc.
1. In power off mode, connect the 3.5mm stereo jack from the supplied Audio Connection
Cable to the AUX Out/Line Out/Phone Jack on the external Audio Player.
2. Connect the other end to the AUX (in) Jack on the rear of unit as the figure below:
3.
4.
Power on the unit as previous procedures. Press the
Button repeatedly unit “Line
in” hear from speaker.
Plays the music on the connected Audio Player as usual. (Make sure the volume level of the
connected Audio Player is high level. Otherwise, sound from this unit is weak).
RESET:
If the unit is halt or abnormal operation, press the Reset Button in the AUX (in) Jack by
a small driver (not included) to shut it off. Press and hold the
Button approximate
0.5 second to turn it on again.
Troubleshoothing:
Can’t power on
No sound or sound weak
Sound distortion
Built in battery consumed
Volume of the unit was set to
minimum position
Volume of paired/connected
device in low level
Volume level too high
Volume level of the
connected/paired device too
high
EQ of the connected/paired
device was set to super bass
BT not functioning
The USB Device/Micro SD
Card can’t be play
Recharge the battery
Increase the volume by press
and hold the Button
Rise the volume level of the
connected/paired device
Reduce the volume level by
press and hold the  Button
Reduce the volume level of
the connected/paired device
Set the EQ of the
connected/paired device to
others modes
The external BT device too
Place the external BT device
far from the unit
close to the unit
The USB Device/Micro SD card Try the others USB
may not match the speaker
Device/Micro SD Card
Gernal Specification:
Power Source
Maximum Play time after fully charge
Built‐in DC (DC icon) 3.7V, 1200mAH
(4.44WH) Li‐ion rechargable battery;
5V through Micro USB
Recharge by DC
port
Approximate 4 Hours at 50% Volume Level
BT Effective range
Up to 32 feet in open area
Audio Power
Total 3.6W; 1.8W (RMS) per channel;
Impedance of speaker
3W ; 4 Ohm x 2
Accessories:
1 x User’s Manual
1 x USB Connection Cable (For charge only)
1 x Audio Conection Cable with 3.5mm stereo mini plugs
SPECIFICATIONS AND ACCESSRIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
7
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : francis.zhang
Create Date                     : 2015:10:10 17:34:10+08:00
Modify Date                     : 2015:10:10 17:34:10+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - TA-490说明书
Creator                         : francis.zhang
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:4d9e56ee-0acc-4f4e-a19a-33a282f4c2cb
Instance ID                     : uuid:eeef86cc-25f9-4985-bdc0-19b9b74956d4
Page Count                      : 9

EXIF Metadata provided by EXIF.tools