Top Victory Electronics CM569E User Manual 74326

Download:
Mirror Download [FCC.gov]
Document ID	74326
Application ID	gAThCSsxhds5JJqxhcpSsg==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.73kB (309155 bits)
Date Submitted	1999-12-07 00:00:00
Date Available	1998-08-27 00:00:00
Creation Date	2001-05-09 02:45:38
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-09 02:45:49
Document Title	74326.pdf
Document Author:	VicodinES /CB /TNN

Page 234
'I up Victory lalcctronics ( laiwun) Cu. Ltd. (‘nlm‘ Monitor FCC ID : ARSCM56‘)E
FCC/MELLON JUL 20 1998
EXHIBIT 5
User‘s Manual
User's Manual
Model No: SGIr/5G1r+
56er / SGIrA+
Owner's Manual
Table of Content
General Description -----
Power Saving Feature-
Plug & Play DDCI/ZB Feature ————————————————
FCC Radio Frequency Interference Statement
Safety Precautions»-
Teehnical Information
Specifications——
Factory Preset 'l iming Table ...............................
Operation ------------------------------------------------------------
Front Panel Control--
How to Adjust a Setting
Adjust the picture---- --
Using lhe Right Power Cor
Installing and Removing the Swivel Base ,,,,,,,,,,,,,,,,,,,,,,
External Controls and Connectors~-
Limited Three-Year Warranty ..................................
Packing Lists
The following list contains all items included in the package:
I Monitor
. Owner's Manual
3 Power Cord (Refer to the "using the right power cord" miement)
Jv Swiiel Base
Audio ("abie( For SGer/SGIrA' only )
u.
l'lug & m; Dmcr rm Aoc Spectrum sums Monitors i.» amiloblc 0“
40C \\ ch Nita. \H\\\ uoclldvcum
GENERAL DESCRIPTION
Before operating the monitor please read this manual thoroughly This
manual should be retained for future reference.
Power Saving Feature
This monitor meets the Power Management standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK) This feature is designed to conserve electrical energy
by reducing power consumption when there is no video input signal present,
When there is no video input signal this monitor, following a time-out
period, will automatically switch to an OFF mode This reduces the monitor‘s
internal power supply consumption Afier the video input signal is restored‘
full power is restored and the display is automatically redrawn. The
appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a he} on the keyboard or
clicking the mouse.
- The monitor has the power saving function follouing the VESA DPMS
lfyour PC system is Green PC the monitor can act as Green Monitor.
Otherwtse it isjust a normal monitor.
0 The power saving states can be indicated by the light-emitting diode
(LED) on the front panel:
Mode Signal Potser
Cable H-Sync V-Sync Video Indicator Consumption
On”t Attach Yes Yes Actived Green $ IOO W
Stand-by Attach No Yes Blanked Amber 5 15 W
Suspend Attach Yes No Blanked Amber S [5 W
Off Attach No No Blanked Amber S 5 W
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF
THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS
MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO
INPUTSIGNAL.
Plug & Play DDCl/ZB FeaturetComply with Wlndmts 05 Plug 84 Play)
This monitor is equipped with VESA DDCl’ZB according m VESA DDC
STANDARD. It will allow the monitor to inform the host system about its
identity and, depending on the level of BBC used. communicate additional
levels of display capabilities, The communication channel is defined in two
levels one BBC] and one DDCZB
The BBC] is a un»bidirectional data channel from the Display to the Host.
continuously transmitting EDID infon'nation. The DDCZB is a bidirectional
data channel based on the PC protocol The host can request EDID
information over the DDCZB channel
FCC Class B Radio Frequency Interference Statement
WARNING: {FOR FCC CERTIFIED MODELS)
NOTE This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to Part I5 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. Hottever. there IS no guarantee that interference Wlll not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment offand on, the user is encouraged to try to correct |he
interference by one or more of the following measures-
Recrient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help
L4)N._
Notice:
1. The changes or modifications not expressly approved by the pany
responsible for compliance could void the user’s authority to operate the
equipment
2. Shielded interface cables and A.C. power cord‘ if any, must be used in
order to comply with the emission limits
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. [t is the
responsibilities ot'thi: user to correct such interference
to
Warning:
To prevent fire or shock hazard. do not expose the monitor to rain or
moisture Dangerous!) high voltages are present inside the monitor Do not
open the cabinet. Refer scrvicmg to qualified personnel only
Safety Precautions
Do not use the monitor near water, for example near a bathtub.
washbowl. kitchen sink. or laundry tub. in a wet basement, or near a
swimming pool.
Do not place the monitor on an unstable cart. stand or table If the
monitor falls. it could injure a person or cause serious damage to the
appliance. Use only a cart or stand recommended by the inanuiaclurer or
sold with the monitor, If you mount the monitor on a wall or shelf. use a
mounting kit approved by the manufacturer and follow the kit
instructions.
Slots and openings in the back and bottom of the cabinet are provided for
ventilation, To ensure reliable operation of the monitor and to protect it
from overheating. be sure these openings are not blocked or covered. Do
not place the monitor on a bed. sofa. rug. or similar surface. Do not place
the monitor near or over zi radiator or heat register. Do not place the
monitor in a hookcasc or cabinet unless proper ventilation is provided
The monitor should be operated only from the type of power source
indicated on the label. ll‘you are not stire ofthe type ofpower supplied to
your home, consult your dealer or local power company.
The monitor is equipped With a three-Wire grounded plug, a plug with a
third (grounding) pin This plug will fit only into a grounded power
outlet This IS a safety feature. If your outlet does not accommodate the
ihree»vvire plug. have an electrician install the correct outlet. or use an
adapter to ground the appliance safely. Do not defeat the safety purpose
of the grounded plug
To protect the monitor during a lightening storm or when it is lefi
unattended and unused for long periods of time, unplug it from the
system unit. This Will prevent damage to the monitor from lightening and
power surges.
Do not overload pouor outlet and extension cords Overload can result in
fire or electric shock.
Never push all} object into the slot in the monitor cabinet. It could touch
dangerous voltage points or short out parts resulting in il fire or electric
shock. Never spill liquid on the monitor
Do not attempt to senice the monitor yourself. opening or removing
covers can exposu ion to dangerous voltage or other hazards. Refer all
servicmg to qualified service personnel.
To ensure sulisl‘aclnr} operation. use the monitor only with UL Listed
computers ivhicli have appropriate configured receptacles marked
between 100 - 140 VAC. Min, l,5A.
TECHNICAL INFORMATION
SPECIFICATIONS
CRT
Viewable Image SiLe
Display Color
0 Analog mpul
Input Signal
a Video
- Sync.
Synchronization
- Horizontal
- Vertical
Resolution
Video bandwidth
User mode Timings :
Misconvcrgence
u Center
- Corner
Power Source
Operaiing
Humidity
Weiglil
Dimensions
. Monitor
- Canon
Signal Cable
Factor) Preset Timings.
38cm(15”), 90° deflectionl 29mm neck,
0.28mm dot pitch non-glare screen,
35cm (13 8"). diagonal
Unlimited colors
All timing that meet scanning frequency
Spemficztinn
. Analog R. o. B 0.7va posilive/75 ohm
- Horizontal sync. : Positive/Negative
- Vcnical sync. . Positivei’Negallve
30KHz m 69KHz automatically
SDHz — lZOl-lz automatically
1230 X 1024 Max.
lOOMHZ
0 3mm Max.
0.4mm Max.
Switching mode power supply
AC 100-240V, 50Hfl60Hz full range
0"C to 40°C ambient
IO‘M. to 85% rclallve. non~conden5ing
[2.5Kgs(Net), I4.5Kgs(Gross)
360(W] X 364W) X 385(D)mm
460( W) X 42501) X 494(D)mm
15 pin mini D-Sub
External Controls:
Swnch
Functions ( OSD )
Plug & Play
Power management
Power consumption
Preset display area
Speaker
(501m / SGer" only )
a Rate power
a Impedance
Audio
(50er J50er* only )
0 Audio output
- Frequency response
- Distortion
- input sensitivity
Regulallons
o Power On/Ol‘f Switch
- Shuttle Knob
o Standby Power Switch
0 OSD Key (5Glr/SGIH only) or
Audio Mule Key (SGer/ifierwnly)
l Contrast - Brightness
- H»Size - H-Center
- V-Sizc - V—Center
- Pincushion - Trapezoid
- H»Moirecancel - V-Moire cancel
- Zoom - Userculor
- 6500°K - 9300°K
0 Relation 0 Degaussing
- Recall 0 EM!
. Volume( for 5mm , son/V only )
DDCI'ZB (Designed for Microsoft Windows 95)
EPA A VESA , DPMS
I00 Waits ( Maximum )
260mm x 195mm
ZW (side per channel)
0 6W(front per channel)
I6!) (side per channel)
32 Q {from per channel)
0 7W (Side per channel)
0.35W (from per channel)
IOOHZ —15KH7_{@: EdB
0.0va , 1 lep
UL. CSA. DHHS. FCC-B. I‘Uv GSA CE
TUV MPR-Il
TCO'QZ or TCO‘95l iGIr"SGer* only )
FACTORY PRESET TIMING TABLE
VGA lBM VESA VESA
Timing 640 X 480 720 X 400 640 X 480 640 X 480
60Hz 70Hz 75HZ 85HZ
Mode [v 2 3. 4.
Resolulion 640 X 480 77.0 X 400 640 X 480 640 X 480
H—Polarity Negative Negative Negative Negative
V-Polarity Negative Positive Negative Negative
Hori. Freqt 31.47KH2 Sl.47KHz 37.5Kllz 43v3KHz
Vert. Freq. GOHz 70Hz 75Hz 85 Hz
VESA EVGA VESA EVGA VESA EVGA VESA EVGA VESA EVGA
800 X 600 800 X 600 loll X 768 I024 X 768 1280X 1024
75HZ SSHZ 75Hz 851—11 GOHZ
5. 6, 7. 8, 9
800 X 600 800 X 600 1024 X 768 [024 X 768 1280 X 1024
Positive Positive Positive Positive Positive
Positive Positive Posmve Positive Positive
46.875KH2 53 67KHZ 60.02KHZ 68.6KH1 63.8KH1
75HZ XSHZ 75HZ 85 Hz GOHZ
Notes
- Do not install the monitor in a location near heat sources such as radiators
or airducts. or in a place subject to direct sunlight , or excessive dust or
mechanical vibration or shock.
- Save the original shipping canon and packing material. They will come in
handy ifyou ever have (0 sltlp tour monitor.
- For maximum protectioiir repack your monitor as it was originally packed
at the factor)
0 To keep the monitor looking brand—new. periodically clean it With a soft
cloth Stubborn stains ma) be removed With a cloth lightly dampened
with a mild detergenl solution Never use strong solvents such as thinner
or benzene or abrasive cleaners \I“C€ these will damage the cabinet. As a
safety precautionr alwais unplug the monitor before cleaning7 ii
OPERATION
lhe power switch is located at rear side base ofthe monitor (See Figure 4).
Press the power svtttch to turn the monitor on or off. The other control knobs
are located at the base ofthe monitor (See Figure 1). User could make a good
appearance ofthe monitor to suit personal preference by press these controls,
- The power cord should be connected.
- Connect signal cable from monitor to PC D—type outputjack,
- To turn the monitor on. press the POWER switch to ON position. The
power indicator will light up
0 Your monitor features a unique quick switch system which provides a
picture within seconds after the monitor is switched on Unlike
conventional instant picture system. there is absolutely no power
consumption when the monitor is not in use
my
i my
ismxsau" tsctnsmwt
m... m,
we, ......., ......
m m
SGIr v sch+ SGIrA v sctrA‘r
Figurel External Control Knob
Front Panel Control
a Standby power:
Press the key. monitor enter offmodc. LED appear amber and flash.
Press the key again and keep 0.85, monitor restore normal status.
0 Shuttle Knob:
To Control functions of the monitor. Rotate to switch the function or
adjust. Press to select a function or execute the function .
' OSD keylSGIr/SGIH only) or Mute Key(SGer/SCIrA+ only)
sch/sent: Press me 050 Key . active 0er window . or exit 050
window and save data .
sum/saint; When Audio is normal. prcss the Audio mute key it will
he mute When Audio ts mute. press the key . it will be
normal.
How to Adjust a setting
I.
Lyetq
u.
Press the Shuttle Knob or OSD Key ( SGIr/SGIr' only ) to show the OSD
window. See figure 2.
Rotate the Shuttle Knob to select the desired function. See figure 2.
Press the shuttle Knob again to select the function that you want to adjust
Rotate the shuttle Knob to change the adjustment ofthe selected function,
The OSD window will go out and the new setting has automatically been
saved. ifyou press the OSD Key ( 50h / SGIr+ only ) or the EXIT symbol
is selected or do not change any other setting afier approx IO seconds.
If you want to adjust other function. repeat steps 2—5.
When the OSD window active, it shows the Input signal timing. The "H”
is for the horizontal frequency and "V" for the Vertical frequency.
[fyou do not change any other setttn" the OSD window will go out after
a ,
10 seconds . The new settmg has automatically been saved . ifnot you can
select the EXIT to end adjustment.
SGlr SGIr* SCer 1 SGer+
Figure2 The OSD Message
Adjust the picture
A. CONTRAST O
Rotate the Shuttle Knob clockwise to increase Contrast and counter»
clockwise to decrease.
B. BRIGHTNESS .
Rotate the Shuttle Knob clockwise to increase Brightness and counter—
clockwtse to decrease.
C. H-CENTER ® .
Rotate the Shuttle Knob clockwtse to reposition display to the right
and counter-clockwise to the left,
D4 H-SIZE ,
Rotate the Shuttle Knob clnckutse to enlarge hortzontal size and
counter-clockwise to reduce.
E. V-CENTER (9 .
Rotate the Shuttle Knob clockwise to more the entire picture upward
and counter-clockwise to downward
F. V-SIZE .
Rotate the Shuttle Knob clockwise to enlarge vertical size and
counter-clockwise to reduce > I
c. ZOOM LBJ .
Rotate the Shuttle Knob clockwtse to enlarge picture size and
counter-clockwise to reduce,
H. rthusmou l] .
Rotate the Shuttle Knob clockwise or counter - clockwise for optimal
pincushion or Barrel picture
1. TRAPEZOID D .
Rotate the Shuttle Knob clockwise or counter . clockwise for optimal
square picture.
J. ROTATION @
Rotate the Shuttle Knob clockwise or counter-clockwise for optimal
till screen picture
K. H- MOIRE CANCEL [1
Rotate the Shuttle Knob clockwtse or counter— clockwise to change
H- -moire cancel function status.
L. V- MOIRE CANCEL
Rotate the Shuttle Knob clockwm or counter clockwise to change
V molre cancel function status.
M. DEGAUSSING Pr
Select this function and press the Shuttle Knob for manual degaussing
N. 9300°K/6500"K
The colour temperature for QSOOCK in EU ZSI. yf0.3 I] and 6500¢K
is x20 SI} yZO. 329 It presents two different colour on the screen.
You can select 9300“K or 6500"K by pressing the shuttle Knob
0. VOLUM1:(forsan/scrm‘r only; (to
Rotate the Shuttle Knob clockwtse or counter-clockwise to increase or
decrease volume. .
P. USER COLOR (Red/Blue ) W
Rotate the Shuttle Knob clockwrse or counter—clockwise to increase or
decrease R/B gain and get the user‘s setting colour
Q. RECALL <6
It is used to recall the factor} preset mute among the 9 preset timing
modes, Bestdes the 9 pre—set timing modes. It can't be recalled when it
is defined as the user's modes.
R. EXIT [3
Select the Exit“ and press shuttle Knoh to exit the OSD windows
10
Using the Right Power Cord
The accessory Power Cord for the Northern American region is the wallet
plug with NEMA 5-15 style and is UL Listed and CSA Labeled. The voltage
rating for the Power Cord shall be 125 volts AC.
Supplied with Units Intended for Connection to Power outlet of Personal
Computer Please use a cord set consisting offl minimum No. 18 AWG, type
SJT or SVT three conductors flexible cordv One end terminates with a
grounding type attachment plug. rated IOA. 250V, CEE-ZZ male
configuration The other end teminates with a molded~on type connector
body, rated 10A. 250V. having standard GEE-22 female configuration.
INSTALLING AND REMOVING THE SWIVEL BASE
T0 attach the swivel base to the monitor, do the following:
- Carefully turn the monitor on its side or upside down (see figutE 3)
- Locate the cavities at the bottom front ofthe ll'lOnllOl.
- Insert the pegs on the swivel base into these cavities Push the swivel base
fomard until the swivel base locks in place.
- Turn the monitor right-side UP and begin to install the monitor.
0 To remove the swivel base, hold the bottom ofthe swtvel base‘ then push
it out. User can easily lift offthe swivel base from the monitor bodyi
Figure 3 lnstalling and Remming the Swivel Base
11
EXTERNAL CONTROLS AND CONNECTORS
Connecting the Video Cable: the monitor comes with a built-in video
cablePing the signal cable's 15-pm connector mm the computer‘s video part
and tighten the two screws on the cable connectortsce figure 4)
Connecting the Power Cord: Plug the power cord mm the monitor's AC
pouer jack Then plug the power cord into a grounded AC outlet or UL»
approved power strip or the power output socket on your PC.
Caution: I] the AC outlet is not grounded (only tum Ira/es), instill! the
proper grounding (Maple! (not suppliedl
Connecting the Earphone Cable (SGer/SGIrA* only): Plug earphone
cable into earphone outputjack.
Connecting the Audio Cable (SGer/SGIrIU' only): Plug audio cable
between the computer multHnedia (or sound) cards audio output and
monitor's audio input.
signer input
Connector
PlNl PIN 5
FIN 10
Audm mput
A L scutx/ sctu‘
PJN
pm 11 PIN is k
{M nu @ has“... on
;J\_ seln/scm‘
fifi
Power SwrtEh «— —— AC Inlet
Figure4 Connecting Caales
Video Cable Pin Assignments:
I Red 5 Ground l 9 NC I3 H»aync
2 Green 6. R»Gr0und 10. Ground [4 Vv Sync ‘ VCLK
St Biuc 7. G-Ground llv Monitor Ground 15 DDC—Serial Clock
4 Ground 8. B~Gt0und l2v DDC-Serial Daltt * FOR DDC
12
LIMITED THREE—YEAR WARRANTY
for AOC Color Monitors
Including those Sold within the European Countries as Specified
AOC International warrants this product to be free from defects in material
and workmanship for a period of three (3) gears alter the original date of
consumer purchase. During this period. AOC International will. at its option.
either repair the defective product with new or rebuilt parts. or replace it with
a new or rebuilt product at no charge except as *stntcd below. The parts or
product that are replaced become the property of AOC International (USA)
Ltd.
In the USA to obtain serVice under this limited warranty call ADC
lnlernational for the name of the Authorized Service Center in your area.
Deliver the product freight pore-paid, along with the dated proof of purchase,
to the AOC Authorized Service Center. if you cannot deliver the product in
person:
O Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping canon
Insure it (or assume the risk of loss / damage duringv shipment)
Pay all shipping charges
AOC international is not responsible for damage to inbound product that was
not properl) packaged.
AOC International will pay the return shipment charges within one of the
countries specified within this warranty statement AOC International is not
responsible for any costs associated With the transportation of product across
international borders. This includes the international borders ofthe countries
within this warranty statements.
In the United States Contact your Dealer or ADC International Customer
Service RMA Department at the toll free number (800) 775-1262.
In Canada Europe ( this warranty is valid in the member countries of the
European Community ), Contact your Dealer. Reseller. Distributor or the
organization where you obtained your monitor in case ot‘ problems during the
warranty period in order to receive factory level approved service. In Europe
all repairs will be done al AOC Authorized Scniw ("enters similar to the
ones in the USA.
“ This limited warrant) does not cover any losses oi damages that occur as a
result of:
0 Shipping or improper installation or maintemmuc
Q Misuse
13
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repairr modification‘ or installation of options or parts by anyone other
than an AOC Authorized Service Center
' Improper environment
0 Excessive or inadequate heating, or air conditioning or electrical power
failures. surges or other irregularities
This three-year limited warranty does not cover an) of the product's
firmware or hardware that you or any third party have modified or alteredl
you hear the sole responsibility and liability for any such modification or
alteration
‘\LI, I,XI’IU\'S \NI) IN'II‘LIIEI) WARRANIIES l'OR I‘IIIS PRODUCT
(NfiLUDING Ill], “ARRANTI U! MIQRCIIANIABII llY AND FII'N 5
FOR ,\ l’ R I Kill. \R I‘URI’O. ARE LIVIIILI) IN DI‘RAIIKN It) A PERIOD
(tl- I'HR] 37 Y ‘\RS FOR PARTS AND LABOR I'ROM Illlz ORIGIN I, DAI E
OF CONS VILR I’IIRLIMSI, NO WARRANII "III'R I'Xl’k
IMPLILD) \PI'LY /\ hR IIIIS I’F IUD IN IIll IINIIH) Q HES OF
AMERICA. SUMII SI ~ 5 DO BOI . OW I,]l\‘lll}\l'l(NS ON HOW LONG
AN IMI’I ILI) WARRANI'Y I AS IS. SO [HF ABOVL LIMI I'AIIUNS' MAY NOT
APPLY IOY( a
AOL" IN'I‘IZKNA I IONAI N OBLIGATIONS ANI) YOUR REMEDIES
llliRLUNDi-ZR ARI‘ SOLELY AND EXCLUSIV sY AS S'I.\IL[) HFR , AOC
IN'IERNAI‘IONAL LIABILIIY. WIIE'IHER BA. .D ON CUNIRACL ]()Rl'.
“ARRANIY SI‘RICI LlABILl'lY OR OTIII.R IIIIIORY. SIIAI NU]
lzXCI‘i-I) Ill]: PRICE OI‘ IIIE INDIVIDUAL UNII WHO“: DII [ OR
DAR \(i|{ IS I'III‘, BASIS OF IIIL CLAIM. IN ht) I<\/ NI SHAI AOC
INI'I AIIONAI BE LIABLI: FOR ANY LOSS (JI‘ PROFIT . L095 OF USE
OR '\('Il.||'|l-,S OR FQUIPMI‘NI UK 0” INDIRI'K]. INCID \IT/\ ()R
(“N thllleMl DAMAGI‘ IN IIlI- INI‘I‘I—.I)§l.\lil.fi t)l r\M]-.RICA, SOME
‘ .' IN) NUI ALLO‘A Ii XCLUSIOV UR LIMIIAIION OF
INQIDFN'IAI, UK CONS QUI—A IAI, DAMAGES M) I'HF ABOVE
LIMI'IAIHN MAY NO"! APPLY I'tt VOl' ,\| IIIUI'GII IIIIS LIMITED
WARRANIY (iIVI'S YOU LL'IHC LEGAL RILiIIIS YUI MAY HAVE
(”Ill-R RIOHI'S “IIICH MAY VARY PROM STATE It) “All.
In the United States of Amerlca‘ this limited warrant) is only valid for
Products purchased in the Continental United States. Alaska and Hawaii.
Outside the United States at” America. this limited warrant} is only valid for
Products purchased in Canada and the member countries Of the European
Union
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:09 02:45:38
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 74326.pdf
Modify Date                     : 2001:05:09 02:45:49-04:00
Page Count                      : 16

EXIF Metadata provided by EXIF.tools