Top Victory Electronics CM7950 User Manual 58732

Download:
Mirror Download [FCC.gov]
Document ID	58732
Application ID	liPp+tDDshfuOeDBbm/chQ==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	97.65kB (1220627 bits)
Date Submitted	1999-09-13 00:00:00
Date Available	1999-10-09 00:00:00
Creation Date	2001-06-06 22:12:33
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-06 22:12:44
Document Title	58732.pdf
Document Author:	jsoscia

EXHIBIT 7
USER’S MANUAL OF EUT
TSIrI7SIrA
FCC w : wgu~479fi>
Before operating the monitor please read this manual thoroughly. This
manual should he retalned for future relerence.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and lound to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
Interference In a residential installation. Thls equlpment generates, uses and
can radiate radio Irequency energy, and if not installed and used in
accordance with the instructlcns, may cause harmful interference to radio
communlcatlons. However. there is no guarantee that lnter'enence wlII not
occur in a particular installation. If this equlpmant does cause hamrful
interference to radio or television reception, which can be determined by
turning the equipment all and on, the user Is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorlent or relocate the receiving antenna.
2. Increase the separatlon between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dillerent from that to
4.
which the receiver Is connected.
Consult the dealer or an experienced rattle/TV technlclan for help.
1, The changes or modifications not expressly approved by the party
responsible tor compliance could void the users authority to operate the
equlpment.
2. Shlelded interface cables and AC power cord, if any, must be used in
order to comply with the emlssion limits.
3, The manufacturer Is not responsible for any radio or TV Interference
caused by unauthorized modlflcatlon to thls equipment. It is the
responsibilities of the user to conect such interference.
As an ENERGY STAR“ Partner AOC International has determined that this
product meets the ENERGY STAR” guidelines for energy efflclency.
WARNING:
To prevent lire or shock hazard. do not expose the monitorto rain or moisture.
Dangerously hlgh voltages are present Inside the monltor. Do not open the
cabinet. Reler servicing to qualllied personnel onty.
Do not use the monitor near water. e.g. near a bathtub. washbowi. kitchen
sink, laundry tub, swimming pool or in a wet basement.
Do not place the monitor on an unstable cart, stand. or table. It the
monitor tails, it can In|ure a person and cause serious damage he the
appliance. Use only a cart or stand recommended by the manufacturer or
sold with the monitor. it you mount the monitor on a wall or shelf, use a
mounting kit approved by the manuiacturer and iollow the kit instructions.
Slots and openings in the back and bottom of the cabinet are provided tor
ventilation. To ensure reliable operation 0! the monitor and to protect it
trorn overheating, be sure these openings are not blocked or covered. Do
not place the monitor on a bed, sofa, mg, or similar surface. Do not place
the monitor near or over a radiator or heat register. Do not place the
monitor in a bookcase or cabinet unless proper ventilation Is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug. a plug with
a third (grounding) pin. This plug will tit only into a grounded power outlet
as a safety feature. If your outlet does not accommodate the three-wire
plug, have an electrician install the correct outlet, or use an adapter to
ground the appliance safely. Do not defeat the saiety purpose oi the
grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long
periods of time. This will protect the monitor from damage due to power
surges.
Do not overload power strips and extension cords. Overloading can result
in fire or electric shock.
Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
Do not atmmpt to service the monitor yourseii; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
To ensure satisfactory operation. use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC. Min. 2.5A.
BEFORE YOU OPERATE THE MONITOR
43.20m(1 7') Color Monitor
Crisp, Clear Display for Windows
Supports Resolutions up to 1500 X 1200
Power Management
Ergonomic Design (MPR Il Approved)
Space Saving, Compact Case Design
The product package should include the following Item:
A Monitor
Owner's Manual
Power Cord
Swivel Base
Audlo Cable/DC Power Cable ( For 7SIrA only )
mewwa
SWIVEL BASE
To attach the swivel base to the monitor, do the following:
Carefully tum the monitor on its side or upside down. (see figure 1 )
- Locate the cavities at the bottom front of the monitor.
Insert the pegs on the swivel base into these cavities. Push the swivel
base forward until the swivel base locks in place
To remove the swivel base, hold the bottom of the swivel base. then push
it out.
POWERCORD
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord Into your monitor's power Input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC. depending on the type of power cord supplied wlih your monitor.
VIDEO CABLE
Connecting the Video cable: the monitor comes with a built-in video cable.
Plug the signal cable's 15-pln connector into the computer‘s video port and
tighten the two screws on the cable connector. (see figure 2)
Connecting tho Power Cord: Plug the power cord into the monitor’s AC
power socket. Then plug the power cord into a grounded AC outlet or UL-
approved power strip or the power output socket on your PC.
Caution: I! the AC outlet is not grounded, install the proper grounding
adapter (not supplied),
Connecting the Audio Cable ( 75er only ): Plug audio cable between the
computer multi—media (or sound) card's audio output and monitor‘s audio
input.
Connecting the Dc Power Cable ( 7SIrA only ): Plug DC power cable
between monitor to swivel base for audio power
7S|r 7S|rA
FigureZ Connecting Cables
Power Cord
VGA Card Adater
OPERATING INSTRUCTIONS
The other control knobs are located at the base of the monitor (See Figure 3).
By changing these settings, the picture can be adiusted to your personal
preferences.
. The power cord should be connected,
0 Connect the video cable from the monltorto the video card.
a To tum the monitor on, mess the POWER switch to ON position. The
power Indicator will light up.
0 Your monitor features a unique qulck switch system which provides a
picture within seconds after the monitor is switched on.
zfijg
4)
o—
®—‘ —@
7SIr
Figure3 External Control Knob
EXTERNAL CONTROLS
$71
Shuttle Knob
Standby Power
ONIOFF Swrtch
Power Indicator
ONT PANEL CONTROL
- Standby power key :
When pressed, the monitor enters the off mode, and the LED turns
orange. Press again and hold to restore normal status.
0 Shuttle Knob :
The Shuttle Knob is used to control the monitor functions. Rotate to
switch functions or adjust settings. Press to select or execute a function .
o OSD Key:
The OSD Key is used to activate the OSD window, or to exit the OSD
window and save the settings.
0 Power Indlcator 5
Green — Power On mode.
Orange — Stand-by mode. Suspend mode. or Off mode.
SWIVEL BASE CONTROL (7Ser ONLY
- Audio Power
ON or OFF Audio Power
- Power Indicator
Green -— Audio Power ON.
0 Volume
Adjustable Audio volume.
0 Do not install the monitor in a location near heat sources such as
radiators or air ducts , or In a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
0 Save the original shipping carton and packing materials. as they will come
in handy if you ever hare to ship your monltor.
- For maximum protection. repackage your monitor as it was originally
packed at the factory.
0 To keep the monitor looking new, periodically dean it with a soft cloth.
Stubbom stains may be removed with a doth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene.
or abrasive cleaners. since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
9 weep
Press the Shuttle Knob or OSD Key to make the OSD window appear.
See figure 4.
Rotate the Shuttle Knob to select the desired function. See figure 4.
Press the Shuttle Knob again to select the function that you want to adjust.
Rotate the Shuttle Knob to change the settings oi the current function.
When the OSD window is active. it shows the input signal timing. The
‘H" stands for the horizontal frequency and 'V" for the vertical frequency.
To exit and save, either press the OSD Key, select the exit function. or
leave the monitor alone far 10 seconds. If you want to adjust any olher
function. repeat steps 2-4,
O-lfI-CDEEHZDQ
Conlrlst
CONTRAST
d BRIGHTNESS Adjust the picture brightness.
Adjust the picture contrast.
Adjust the horizontal position at the picture.
© H» CENTER
H- SIZE Adjust the picture's horizontal size.
V- CENTER Adjust the vertical position of the picture.
V- SIZE
Adjust the picture's vertical size.
ZOOM
PINCUSHION
Adjust the picture’s horizontal and vertical
size simultaneously.
Adjust the pincushion and banel
TRAPEZOI D
PI N-BALANCE
Adjust the picture's trapezoid distortion.
Adjust to compensate the plncushlon
unbalance.
PARALLELOGRAM Adjust the picture to be a rectangle.
ROTATION Adjust the picture tilt to horizontal position.
6500“K/9300°K The color temperature for 6500°K i 0 313,
(COLOR y=0.329 and 9300°K is x=0.281, y= 311. It
TEMPERATURE) presents two dittsrent color sets on the
screen. You can select 9300°K or 6500°K by
pressing the Shuttle Knob.
USER COLOR
( Red I Blue )
It the 9300°K normal white or 6500°K warmer
white do not satisfy your desire. property
adjust R . B GAIN controls to obtain your
optimum whiteness level.
DEGAUSS
It color impurity occurs when moving or
swiveling the monitor. press the Shuttle Knob
and d auss to fot the icture condition.
MOIRE REDUCE
Moire Is the result of Interference between
the phosphor layout and the video signal. In
some cases. you may find the moire very
noticeable. Press the Shuttle Knob to enter in
the moire reduce setting. Please adjust the
level to the optimum condition. Note: Too
high of a setting will cause the picture to
shake.
RECALL
EXIT
Press RECALL to restore the monitor to
fecto setti 5.
Close OSD window.
The power management feature of this product complles with every power
saving requirements of ENERGY STAR“ and VESA DPMS when activated. it
automatically reduces unnecessary power consumption of the monitor when
your computer is not in use.
To use the leature. the monitor needs to be connected to a VESA DPMS
computer. There are three power management modes avallable, these are
described below. The required settings. including the timer setting. should be
made by the computer.
. stand-by Mode
When the H-sync signal from the computer is off. the monitor enters into
Stand-by Mode which reduces the power consumption to less than 15W.
The screen becomes dark. and the power indicator turns to orange. From
Stand-by Made, the screen reappears instantaneously when the keyboard
or the mouse is touched again.
a Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into
Suspend Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Suspend Mode, the screen reappears Instantaneously when the keyboard
or the mouse is touched again.
- Active-off Mode
When both the H and V sync signals from the computer are off, the
monitor enters into Active-off Mode which reduces the power consumption
to less than SW. The screen becomes dark, and the power indicator turns
to orange. From Active-off Mode. the screen reappears instantaneously
when the keyboard or the mouse is touched again.
a The power-saving mode can be Indicated by the light-emitting diode (LED)
on the tront -an
ma Attached m-m—
Afiached "m
Ei- Aflached mum—mama
Note: The power consumption is calculated without audio power consumption
at power saving status.
FEATURES
Green monitor
- The monltor has a power saving function that conforms to the VESA
DPMS standard, This feature will only work If your PC Is a green PC. This
feature Is slmllar to a screen saver. except that your monitor will turn it off
instead of activating the screen saver,
To activate this feature in Windows" 98 :
In Windows" 93, this feature can be activated and customized under the
screen saver setting of the display properties.
1. Right click on the desktop and choose Properties.
2. Click on the tab that says Screen Saver, If your system supports Green
PC, there will be a section entitled “Energy Saving Features of Monltlor.’l
it there isn't a section like that. then your PC does not support Green
Monitor. The monitor will behave just like a normal monitor, so you will
have to tum it off manually to save energy.
3. In the “Energy Saving Features of Monitor” sections are two boxes,
Standby and Shut off. To activate either one, click the box next on each
one.
4. You can specify the amount of inactive time before your monitor enters
standby mode or shuts oft.
Plug & Flay DDC1IZB Feature
This monitor is equipped with VESA DDCtIZB capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
Identity and. depending on the level 01 BBC used, communicate additional
information about its display capabilities. The communication channel Is
defined In two levels, DDCl and DDCZB.
The DDC1 Is a unidirectional data channel from the display to the host that
oontinuousty transmits EDID Information. The DDCZB Is a bidirectional data
channel based on the lie protocol. The host can request EDID Information
over the DDCZB mannel.
10
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS
NO VIDEO INPUT SIGNAL IN ORDER FOR THIS MONITOR TO OPERATE
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Power Management standards as set by the Video
Electronics standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK ). This feature is designed to conserve electrical energy
by reducing power consumption when there is no video input signal present.
When there is no video input signal this monitor. following a time-out period.
will automatically switch to an OFF mode. This reduces the monitors intemai
power supply consumption. After the video input signal is restored, full power
is restored and the display is automatically redrawn. The appearance is
similar to a "Screen Saver" feature except the display is completely off. The
display is restored by pressing a key on the keyboard. or clicking the mouse.
USING THE RIGHT POWER CORD.
The accessory power cord for the Northern American region is the wallet plug
with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating
for the power cord shall be 125 volts AC,
Supplied with units intended for connection to power outlet of personal
computer: Please use a cord set oonsistlng of a minimum No. 13 AWG, type
SJT or SVT three conductors flexible cord. One end tenninetes with a
grounding type attachment plug. rated 10A, 250V, GEE-22 male configuration.
The other end terminates with e molded-on type connector body, rated 10A.
250V. having standard GEE-22 female configuration.
11
TECHNICAL SUPPORT (FAQ)
Possible Solution
lCheck if the Power Switch is in the ON
position
‘Power Cord should be connected
'Check it the Wdeo Card is Plug & Play
compatible
‘ 'Check if the Wdeo Card Is Plug 8. Piay
compatible
‘Check lithe D—15 plug pln of Video Cable
is bent
'Make sure the AOC Monitor Drivers are
Installed
(AOC Monitor Drivers are available at:
mrwaoc-euro e.oom
'Oompuler Power Switch should be in the
ON position
'Computer Video Card should be snugly
seated in its slot
"The Signal Cable should be completely
connected to his computer
'Check the color of the Power LED
indicator. It It |s orange, then the monitor
J!“ and the PC system are in power—saving
V . - mode. You need press your keyboard or
' g . move the mouse to reactivate the
- s slem.
; r< “Adjust the Contrast and Brightness
4 Controls.
'Move electrical devices that may cause
electrical interference.
"Make sure monitor’s video cable Is
properly connected to the computer.
'Inspect monitor‘s video cable and make
sure none at the pins are bent.
'Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS
LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK
ke .
'Inspect the monitor’s video cable and
make sure that none of the pins are
bent.
12
APPENDIX
43.29m(17"), 90° deflection, 29mm
neck
40.6cm (16"), diagonal
,-r.1_:—
.—:—
10%to 85‘melaflve non-condensin
410 X411H i4300mm
7Glr
13
Shums Knob
Standby Power Switch
059 Key
Volume 7SIrA
Contrast
Bnghtness
H-Cenfier
H-Size
V-Cenler
V-Size
Zoom
Pincushion
Trapezoid
Pin-Balance
Parallelograrn
Rotatlon
6500°K
User Color
9300°K
Dsgauss
Molre Reduce
Recall
- Exit
DDC1IZE
EPA VESA DPMS
120 Watts
~ 300mm x 230mm
Rand Power 0.5W rms
Per channel
UL, CSA, FDA, FCC. T 168, CE,
MFR II, TCO'95
tat-ntooocllo-ooo-oooo
7Ger
14
31 .46kHz
31 .46kHz
37.5kHz
800 x 600
1024 x 768
1024 x 768
1280 X 1024
1280" 960 85.938kHZ
1280K 1024 91.14kHz
160m 1200 953.75th
15 - Pin Color Dlsplay Signal Cable
NC
— . _
. . MonitorGround
15
LIMITED TH REE-YEAR WARRANTY”
fo
ADC Spectrum Color Mon’ltors sold within Europe
AOC International (Europe) GmbH wananls this product to be free from
defects In material and workmanship for a period of Three (3) years after the
original date of consumer purchase. During this period. AOC Inlemationel
(Europe) GmbH will, at Its option, either repair the defective product with new
or rebuilt parts, or replace it with a new or rebuilt product at no charge except
as 'staied below. The defective products that are replaced become the
property ofAOC International (Europe) GmbH.
If the product appears to be defective, please contact your local dealer or
refer to the warranty card when attached to the product.
Deliver the product freight pro-paid, along with the dated proof of purchase,
to the AOC Authorized Service Center. If you cannot deliver the product in
person:
- Pack It In Its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
AOC Intemational (Europe) GmbH Is responsible neither for any damage or
loss during Inbound transport damage nor to Inbound product that was not
properly packaged.
A00 Inlemational (Europe) GmbH will pay the return shlpplng charges within
one of the countries specified within this warranty stalement.
AOC Intemaiional (Europe) GmbH is not responsible for erw costs
associated with lhe transportation of product across international borders.
This includes the intematicnal border within the European Union.
' This limited warranty does not cover any losses or damages that occur as a
result of
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification. or installation of options or parts by anyone
other than an AOC Authorized Service Center
Improper environment
- Excessive or inadequate heating or air conditionlng or electrical
powers failures, surges, or other irregularities
1G
nu...-
This limited warranty does not cover any of the product firmware or hardware
that you or any third party have modified or altered: you bear the sole
responsibility and liability for any such modificalion or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT
(INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE
ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES
(EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR
REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED
HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY. STRICT LIABILITYI OR
OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL
UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO
EVENT SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR
ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT,
OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE
OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS
PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:06 22:12:33
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 58732.pdf
Modify Date                     : 2001:06:06 22:12:44-04:00
Page Count                      : 19

EXIF Metadata provided by EXIF.tools