Top Victory Electronics M761 Color Monitor User Manual S761 E

Download:
Mirror Download [FCC.gov]
Document ID	132050
Application ID	eXzpaacDV49Zj1LBNyJ/Pw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.41kB (530142 bits)
Date Submitted	2001-01-10 00:00:00
Date Available	2001-01-05 00:00:00
Creation Date	2000-12-19 22:35:41
Producing Software	Acrobat PDFWriter 4.0 for Windows NT
Document Lastmod	2000-12-28 10:19:00
Document Title	S761-E.PDF
Document Creator	Microsoft Word - S761-E
Document Author:	angel

Your Work Never Looked Better
7Elr/7Elr+
USER MANUAL
TABLE OF CONTENTS
ENGLISH
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2 DEUTSCH
BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS --------------------------
3 FRANÇAIS
OPERATING INSTRUCTIONS ------------------------------------GENERAL INSTRUCTIONS ---------------------------------HOW TO ADJUST A SETTING -----------------------------ADJUSTING THE PICTURE ---------------------------------POWER MANAGEMENT FEATURE ----------------------PLUG AND PLAY ------------------------------------------------
7 ITALIANO
10
ESPAÑOL
TECHNICAL SUPPORT(FAQ) ------------------------------------- 12
APPENDIX --------------------------------------------------------------- 13
SPECIFICATIONS --------------------------------------------13-14
FACTORY PRESET TIMING TABLE ---------------------- 15
CONNECTOR PIN ASSIGNMENT ------------------------- 15
LIMITED THREE-YEAR WARRANTY -------------------------16-17
Thank you very much for choosing the AOC Color Monitor.
We recommend that you take a few minutes to read carefully through this
brief but comprehensive manual before installing and switching on the
Before
thefor
monitor
please
read Series
this manual
thoroughly.
This
Plug & operating
Play Drivers
the AOC
Spectrum
Monitors
are available
manual should be retained for future reference.
at AOC’s Web Site: www.aoc-europe.com
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE
1.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
As an ENERGY STAR? Partner AOC International has determined that this
product meets the ENERGY STAR? guidelines for energy efficiency.
WARNING :
To prevent fire or shock hazard, do not expose the monitor to rain or
moisture. Dangerously high voltages are present inside the monitor. Do not
open the cabinet. Refer servicing to qualified personnel only.
PRECAUTIONS
? Do not use the monitor near water, e.g. near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
? Do not place the monitor on an unstable cart, stand, or table. If the
monitor falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer
or sold with the monitor. If you mount the monitor on a wall or shelf, use
a mounting kit approved by the manufacturer and follow the kit
instructions.
? Slots and openings in the back and bottom of the cabinet are provided
for ventilation. To ensure reliable operation of the monitor and to protect it
from overheating, be sure these openings are not blocked or covered.
Do not place the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register. Do not place
the monitor in a bookcase or cabinet unless proper ventilation is
provided.
? The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
? The monitor is equipped with a three-pronged grounded plug, a plug
with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the threewire plug, have an electrician install the correct outlet, or use an adapter
to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
? Unplug the unit during a lightning storm or when it will not be used for
long periods of time. This will protect the monitor from damage due to
power surges.
? Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
? Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
? Do not attempt to service the monitor yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
? To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC, Min. 2.5A.
BEFORE YOU OPERATE THE MONITOR
FEATURES
FEATURES
43.2cm(17”) Color Monitor
Crisp, Clear Display for Windows
Supports Resolutions up to 1600 ? 1200
Power Management
Ergonomic Design (MPR II Approved)
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE MONITOR PACKAGE
The product package should include the following items:
1. Monitor
2. Owner's Manual
3. Power Cord
4. Swivel Base
5. Audio Cable/DC Power Cable ( For 7GlrA only )
INSTALLATIONINSTRUCTIONS
INSTRUCTIONS
INSTALLATION
SWIVEL BASE
To attach the swivel base to the monitor, do the following:
? Carefully turn the monitor on its side or upside down. ( see figure 1 )
? Locate the cavities at the bottom front of the monitor.
? Insert the pegs on the swivel base into these cavities. Push the swivel
base forward until the swivel base locks in place.
? To remove the swivel base, hold the bottom of the swivel base, then
push it out.
Install
Remove
Install
Remove
7Glr
Figure 1
7GlrA
Installing and Removing the Swivel Base
POWER CORD
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord into your monitor’s power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the monitor comes with a built-in video cable.
Plug the signal cable?s 15-pin connector into the computer's video port and
tighten the two screws on the cable connector. (see figure 2)
Caution: Don’t bend the signal cable, otherwise it will break the inner wire.
Connecting the Power Cord: Plug the power cord into the monitor's AC
power socket. Then plug the power cord into a grounded AC outlet or ULapproved power strip or the power output socket on your PC.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Connecting the Audio Cable ( 7GlrA only ): Plug audio cable between the
computer multi-media (or sound) card's audio output and monitor's audio
input.
Connecting the DC Power Cable ( 7GlrA only ): Plug DC power cable
between monitor to swivel base for audio power
7Glr
Figure 2
1.
2.
3.
Power Cord
Signal Cable
VGA Card Adapter
7GlrA
Connecting Cables
4.
5.
PC Audio Output
DC Output
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The other control knobs are located at the base of the monitor (See Figure
3). By changing these settings, the picture can be adjusted to your personal
preferences.
? The power cord should be connected.
? Connect the video cable from the monitor to the video card.
? To turn the monitor on, press the stand by power switch to ON position.
The power indicator will light up.
? Your monitor features a unique quick switch system which provides a
picture within seconds after the monitor is switched on.
7Glr
Figure 3
7GlrA
External Control Knob
EXTERNAL CONTROLS
1.
7Glr
OSD Power Indicator
1.
2.
3.
7GlrA
OSD Power Indicator
Power Indicator
Standby Power ON/OFF Switch
2. Power Indicator
3. Standby Power
ON/OFF Switch
5. Audio Power ON/OFF
6. Volume
7. Earphone Jack
4.
Audio Power Indicator
FRONT PANEL CONTROL
Standby power key :
When pressed, the monitor enters the off mode, and the LED turns
orange. Press again and hold to restore normal status.
Shuttle Knob :
The Shuttle Knob is used to control the monitor functions. Rotate to
switch functions or adjust settings.
Press to select or execute a
function .
OSD Key :
The OSD Key is used to activate the OSD window, or to exit the OSD
window and save the settings.
Power Indicator :
Green —
Orange —
Power On mode.
Stand-by mode, Suspend mode, or Off mode.
SWIVEL BASE CONTROL (7GlrA ONLY ) :
Audio Power
ON or OFF Audio Power
Power Indicator
Green
—
Audio Power ON.
Volume
Adjustable Audio volume.
NOTES
Do not install the monitor in a location near heat sources such as
radiators or air ducts , or in a place subject to direct sunlight , or
excessive dust or mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
HOW TO ADJUST A SETTING
1. Press the Shuttle Knob or OSD Key to make the OSD window appear.
See figure 4.
2. Rotate the Shuttle Knob to select the desired function. See figure 4.
3. Press the Shuttle Knob again to select the function that you want to
adjust.
4. Rotate the Shuttle Knob to change the settings of the current function.
5. When the OSD window is active, it shows the input signal timing. The
"H" stands for the horizontal frequency and "V" for the vertical frequency.
6. To exit and save, either press the OSD Key, select the exit function, or
leave the monitor alone for 10 seconds. If you want to adjust any other
function, repeat steps 2-4.
H: 68.8KHz
V: 85Hz
Contrast
70
9300
Figure 4
6500
The OSD Message
ADJUSTING THE PICTURE
The description for function control LEDS
1.
CONTRAST
Adjust the picture contrast.
2.
BRIGHTNESS
Adjust the picture brightness.
3.
H- CENTER
Adjust the horizontal position of the picture.
4.
H- SIZE
Adjust the picture’s horizontal size.
5.
V- CENTER
Adjust the vertical position of the picture.
10
6.
V- SIZE
Adjust the picture’s vertical size.
7.
ZOOM
Adjust the picture’s horizontal and vertical
size simultaneously.
8.
PINCUSHION
Adjust the pincushion and barrel
9.
TRAPEZOID
Adjust the picture’s trapezoid distortion.
10.
PIN-BALANCE
Adjust to compensate the pincushion
unbalance.
11.
PARALLELOGRAM
Adjust the picture to be a rectangle.
12.
ROTATION
Adjust the picture tilt to horizontal position.
13.
6500°K/9300°K
( COLOR
TEMPERATURE )
14.
USER COLOR
( Red / Blue )
15.
DEGAUSS
16.
MOIRE REDUCE
The color temperature for 6500°K is x=0.313,
y=0.329 and 9300°K is x=0.283, y=0.297. It
presents two different color sets on the
screen. You can select 9300°K or 6500°K by
pressing the Shuttle Knob.
If the 9300°K normal white or 6500°K
warmer white do not satisfy your desire,
properly adjust R . B GAIN controls to obtain
your optimum white ness level.
If color impurity occurs when moving or
swiveling the monitor, press the Shuttle
Knob and degauss to fix the picture
condition.
Moire is the result of interference between
the phosphor layout and the video signal. In
some cases, you may find the moire very
noticeable. Press the Shuttle Knob to enter
in the moire reduce setting. Please adjust
the level to the optimum condition. Note: Too
high of a setting will cause the picture to
shake.
17.
RECALL
Press RECALL to restore the monitor to
factory settings.
18.
EXIT
Close OSD window.
11
19.
SELECT LANGUAGE
Select the language you like.
12
POWER MANAGEMENT FEATURE
The power management feature of this product complies with every power
saving requirements of ENERGY STAR? and VESA DPMS when activated, it
automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS
computer. There are three power management modes available, these are
described below. The required settings, including the timer setting, should
be made by the computer.
Stand-by Mode
When the H-sync signal from the computer is off, the monitor enters into
Stand-by Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Stand-by Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into
Suspend Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Suspend Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
Active-off Mode
When both the H and V sync signals from the computer are off, the
monitor enters into Active-off Mode which reduces the power
consumption to less than 5W. The screen becomes dark, and the power
indicator turns to orange. From Active-off Mode, the screen reappears
instantaneously when the keyboard or the mouse is touched again.
The power-saving mode can be indicated by the light-emitting diode
(LED) on the front panel:
Signal
Cable H-Sync V-Sync
On*
Attached
Yes
Yes
Stand-by Attached
No
Yes
Suspend Attached
Yes
No
Off
Attached
No
No
Mode
13
Video
Active
Blank
Blank
Blank
Power
Indicator Consumption
Green
? 120 W
Orange
? 15 W
Orange
? 15 W
Orange
? 5W
FEATURES
Green monitor
? The monitor has a power saving function that conforms to the VESA
DPMS standard. This feature will only work if your PC is a green PC. This
feature is similar to a screen saver, except that your monitor will turn it off
instead of activating the screen saver.
To activate this feature in Windows ® 98 :
In Windows ® 98, this feature can be activated and customized under the
screen saver setting of the display properties.
1. Right click on the desktop and choose Properties.
2. Click on the tab that says Screen Saver. If your system supports Green
PC, there will be a section entitled “Energy Saving Features of Monitor.”
If there isn’t a section like that, then your PC does not support Green
Monitor. The monitor will behave just like a normal monitor, so you will
have to turn it off manually to save energy.
3. In the “Energy Saving Features of Monitor” sections are two boxes,
Standby and Shut off. To activate either one, click the box next to each
one.
4. You can specify the amount of inactive time before your monitor enters
standby mode or shuts off.
PLUG AND PLAY
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
identity and, depending on the level of DDC used, communicate additional
information about its display capabilities. The communication channel is
defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data
channel based on the I²C protocol. The host can request EDID information
over the DDC2B channel.
14
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO
VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Power Management standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK ). This feature is designed to conserve electrical
energy by reducing power consumption when there is no video input signal
present. When there is no video input signal this monitor, following a timeout period, will automatically switch to an OFF mode. This reduces the
monitor's internal power supply consumption. After the video input signal is
restored, full power is restored and the display is automatically redrawn. The
appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or
clicking the mouse.
USING THE RIGHT POWER CORD :
The accessory power cord for the Northern American region is the wallet
plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage
rating for the power cord shall be 125 volts AC.
Supplied with units intended for connection to power outlet of personal
computer: Please use a cord set consisting of a minimum No. 18 AWG, type
SJT or SVT three conductors flexible cord. One end terminates with a
grounding type attachment plug, rated 10A, 250V, CEE-22 male
configuration. The other end terminates with a molded-on type connector
body, rated 10A, 250V, having standard CEE-22 female configuration.
15
TECHNICAL SUPPORT (FAQ)
Problem & Question
Power LED is not on
No Plug & Play
No picture
Picture is fuzzy
Picture bounces or a wave
pattern is present in the picture
Monitor is stuck in “Power
Saving Mode”
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Possible Solution
*Power Cord should be connected
*Check if the PC system is Plug & Play
compatible
*Check if the Video Card is Plug & Play
compatible
*Check if the D-15 plug pin of Video
Cable is bent
*Make sure the AOC Monitor Drivers are
installed
(AOC Monitor Drivers are available at:
www.aoc-europe.com)
*Computer Power Switch should be in the
ON position
*Computer Video Card should be snugly
seated in its slot
*The Signal Cable should be completely
connected to the computer
*Check the color of the Power LED
indicator. If it is orange, then the monitor
and the PC system are in power-saving
mode. You need press your keyboard or
move the mouse to reactivate the
system.
*Adjust the Contrast and Brightness
Controls.
*Move electrical devices that may cause
electrical interference.
*Make sure monitor’s video cable is
properly connected to the computer.
*Inspect monitor’s video cable and make
sure none of the pins are bent.
*Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS
LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK
key.
*Inspect the monitor’s video cable and
make sure that none of the pins are
bent.
16
APPENDIX
SPECIFICATIONS
CRT Size
43.2cm(17"), 90ºdeflection, 29mm
neck,
CRT
Viewable Image 40.6cm (16"), diagonal
Size
Type
0.25mm dot pitch.
Video
0.7Vpp, R,G,B Analog
Input
Separate Sync. TTL Level
H./V.- Sync.
Positive / Negative
Scanning
H-Frequency
30kHz – 95kHz
Frequency
V-Frequency
50Hz-160Hz
Max. Resolution
1600 x 1200
Video Dot Rate
200MHz
Factory Preset mode :
User
mode :
20
Programmable
Power Source
Universal AC 100 - 240V,
50Hz / 60Hz
Operating
0ºC to 40ºC ambient
Humidity
10%to 85%relative, non-condensing
Dimensions
7Glr:
Monitor & Base 410(W) × 402(H) × 420(D)mm
7GlrA:
Monitor & Base 410(W) × 440(H) × 420(D)mm
Weight
7Glr:
Unit (net)
16.0kgs ( Net )
7GlrA:
Unit (net)
16.8kgs ( Net )
Signal Cable:
Attached Mini D-sub 15 Male
17
410
420
402
(ln mm)
7Glr
18
?
Switch
External Controls:
Plug & Play
Power Management
Power Consumption
Pre-set Display Area
Audio Output
(for 7GlrA only)
Regulatory
Compliance
Functions
Shuttle Knob
Standby Power Switch
OSD Key
Volume(7GlrA)
Contrast
Brightness
H-Center
H-Size
V-Center
V-Size
Zoom
Pincushion
Trapezoid
Pin-Balance
Parallelogram
Rotation
6500°K
User Color
9300°K
Degauss
Moire Reduce
Recall
Exit
Select Language
DDC1/2B
EPA, VESA DPMS
120 Watts
300mm x 230mm
Rated Power 1W rms
(Per channel)
UL, CSA, FDA, FCC, TÜ V/GS, CE,
MPR II, TCO’99
( Maximum )
19
410
420
440
(ln mm)
307
305
7GlrA
FACTORY PRESET TIMING TABLE
STANDARD
RESOLUTION
HORIZONTAL
FREQUENCY
VERTICAL
FREQUENCY
VGA
720 × 400
31.46kHz
70Hz
VGA
640 × 480
31.46kHz
60Hz
VESA/85
640 × 480
43kHz
85Hz
VESA/85
800 × 600
53.6kHz
85Hz
VESA/85
1024 × 768
68.8kHz
85Hz
VESA/85
1280× 960
85.938kHz
85Hz
VESA/85
1280× 1024
91.14kHz
85Hz
VESA/75
1600× 1200
93.75kHz
75Hz
CONNECTOR PIN ASSIGNMENT
10
11
15
15 - Pin Color Display Signal Cable
PIN NO.
DESCRIPTION
PI N NO.
20
DESCRIPTION
1.
2.
3.
4.
5.
6.
7.
8.
Red
Green
Blue
Ground
Ground
R-Ground
G-Ground
B-Ground
9.
10.
11.
12.
13.
14.
15.
21
NC
Ground
Monitor Ground
DDC-Serial Data
H-Sync
V-Sync / ? V-Clk
DDC-Serial Clock
For DDC
LIMITED THREE-YEAR WARRANTY*
for
AOC Spectrum Color Monitors sold within Europe
AOC International (Europe) GmbH warrants this product to be free from
defects in material and workmanship for a period of Three (3) years after the
original date of consumer purchase. During this period, AOC International
(Europe) GmbH will, at its option, either repair the defective product with
new or rebuilt parts, or replace it with a new or rebuilt product at no charge
except as *stated below. The defective products that are replaced become
the property of AOC International (Europe) GmbH.
If the product appears to be defective, please contact your local dealer or
refer to the warranty card when attached to the product.
Deliver the product freight pre-paid, along with the dated proof of purchase,
to the AOC Authorized Service Center. If you cannot deliver the product in
person:
Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
AOC International (Europe) GmbH is responsible neither for any damage or
loss during inbound transport damage nor to inbound product that was not
properly packaged.
AOC International (Europe) GmbH will pay the return shipping charges
within one of the countries specified within this warranty statement.
AOC International (Europe) GmbH is not responsible for any costs
associated with the transportation of product across international borders.
This includes the international border within the European Union.
* This limited warranty does not cover any losses or damages that occur as
a result of
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone
other than an AOC Authorized Service Center
Improper environment
Excessive or inadequate heating or air conditioning or electrical
powers failures, surges, or other irregularities
22
This limited warranty does not cover any of the product firmware or
hardware that you or any third party have modified or altered; you bear the
sole responsibility and liability for any such modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT
(INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD
OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL
DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER
EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR
REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED
HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT
WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT
SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS
OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY
VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY
VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF
THE EUROPEAN UNION.
23

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Microsoft Word - S761-E
Create Date                     : 2000:12:19 22:35:41
Title                           : S761-E.PDF
Author                          : angel
Producer                        : Acrobat PDFWriter 4.0 for Windows NT
Modify Date                     : 2000:12:28 10:19:00+08:00
Page Count                      : 24

EXIF Metadata provided by EXIF.tools