Top Victory Electronics PWMAW632A LCD Monitor (With Dual Mode Wireless Charger) User Manual rev 2

Top Victory Electronics (Taiwan) Co Ltd LCD Monitor (With Dual Mode Wireless Charger) rev 2

User Manual rev 2.pdf

User Guide
© Copyright 2016 HP Development Company, L.P.HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.Product noticeThis guide describes features that are common to most models. Some features may not be available on your product. To access the latest user guide, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions.Second Edition: August 2016First Edition: August 2016Document Part Number: 861846-002
About This GuideThis guide provides information on monitor features, setting up the monitor, and technical specications.WARNING! Indicates a hazardous situation that, if not avoided, could result in death or serious injury.CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.IMPORTANT: Indicates information considered important but not hazard-related (for example, messages related to property damage). A notice alerts the user that failure to follow a procedure exactly as described could result in loss of data or in damage to hardware or software. Also contains essential information to explain a concept or to complete a task.NOTE: Contains additional information to emphasize or supplement important points of the main text.TIP: Provides helpful hints for completing a task.This product incorporates HDMI technology.iii
iv About This Guide
Table of contents1 Getting started ............................................................................................................................................. 1Important safety information ............................................................................................................................... 1Product features and components ........................................................................................................................ 2Features ............................................................................................................................................... 2Rear components ................................................................................................................................ 3Front and side components ................................................................................................................. 4Setting up the monitor .......................................................................................................................................... 5Connecting the cables ......................................................................................................................... 5Adjusting the monitor ......................................................................................................................... 9Turning on the monitor ....................................................................................................................... 9Installing a security cable ................................................................................................................. 102 Using the monitor ........................................................................................................................................ 11Software and utilities .......................................................................................................................................... 11The Setup information le ................................................................................................................ 11The Image Color Matching le ........................................................................................................... 11Installing the .inf and .icm les ........................................................................................................................... 11Installing from the optical disc ......................................................................................................... 11Downloading from the web ............................................................................................................... 12Using the wireless charger .................................................................................................................................. 12Using the on-screen display (OSD) menu ............................................................................................................ 13Assigning the Function buttons ........................................................................................................................... 14Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP) ....................................................................... 15Adjusting to Low Blue Light mode ....................................................................................................................... 15Using Auto-Sleep Mode ....................................................................................................................................... 15Changing the Power Mode setting ...................................................................................................................... 163 Support and troubleshooting ........................................................................................................................ 17Solving common problems .................................................................................................................................. 17Button lockouts ................................................................................................................................................... 18Product support ................................................................................................................................................... 18Preparing to call technical support ..................................................................................................................... 18Locating the serial number and product number ............................................................................................... 194 Maintaining the monitor .............................................................................................................................. 20Maintenance guidelines ....................................................................................................................................... 20v
Cleaning the monitor ........................................................................................................................................... 20Shipping the monitor ........................................................................................................................................... 20Appendix A Technical specications ................................................................................................................ 2160.5 cm/23.8-inch model .................................................................................................................................... 21Preset display resolutions ................................................................................................................................... 2260.5 cm/23.8-inch model ................................................................................................................. 22Entering user modes ............................................................................................................................................ 22Energy saver feature ........................................................................................................................................... 23Appendix B Accessibility ................................................................................................................................. 24Supported assistive technologies ....................................................................................................................... 24Contacting support .............................................................................................................................................. 24vi
1 Getting startedImportant safety informationAn AC power adapter and cord may be included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Product Notices provided on the optical disc or in your documentation kit.WARNING! To reduce the risk of electric shock or damage to the equipment:• Plug the power cord into an AC outlet that is easily accessible at all times.• Disconnect power from the computer by unplugging the power cord from the AC outlet.• If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them.To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo.IMPORTANT: For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specically labeled as having this ability. Use a power strip whose manufacturer oers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury.Care should be taken to route all cords and cables connected to the LCD monitor so that they cannot be pulled, grabbed, or tripped over.Be sure that the total ampere rating of the products connected to the AC outlet does not exceed the current rating of the outlet, and that the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.Install the monitor near an AC outlet that you can easily reach. Disconnect the monitor by grasping the plug rmly and pulling it from the AC outlet. Never disconnect the monitor by pulling the cord.Do not drop the monitor or place it on an unstable surface.NOTE: This product is suitable for entertainment purposes. Consider placing the monitor in a controlled luminous environment to avoid interference from surrounding light and bright surfaces that may cause disturbing reections from the screen.Important safety information 1
Product features and componentsFeaturesThe monitor features include the following:●60.5 cm (23.8-inch) diagonal viewable screen area with 2560 × 1440 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio●Anti-glare panel with WLED backlight●Wide viewing angle to allow viewing from a sitting or standing position, or when moving from side to side●Tilt capability●DisplayPort video signal input●HDMI (High-Denition Multimedia Interface) video signal input with MHL (Mobile High-Denition Link) support●USB 3.0 Type-B upstream port and two USB 3.0 Type-A downstream ports●USB Type-C port that supports power delivery up to 60 watts, DisplayPort 1.2, and USB 3.0●Audio-out (headphone) jack●Integrated speakers with premium audio●DisplayPort, HDMI, HDMI/MHL, USB Type-C, and USB Type-B to Type-A cables included●Wireless charging base that supports Qi and AirFuel inductive technology for mobile phones and tablets●Picture-in-Picture/Picture-beside-Picture technology●Plug-and-play capability, if supported by your operating system●Security cable slot provision on rear of monitor for optional security cable●On-Screen Display (OSD) adjustments in several languages for easy setup and screen optimization●HP Display Assistant software for adjusting monitor settings and enabling the theft deterrence features (refer to the HP Display Assistant User Guide on the optical disc included with your monitor)●HDCP (High-Bandwidth Digital Content Protection) copy protection on all digital inputs●Software and documentation optical disc that includes monitor drivers and product documentation●Energy saver feature to meet requirements for reduced power consumptionNOTE: For safety and regulatory information, refer to the Product Notices provided on your optical disc or in your documentation kit. To locate updates to the user guide for your product, go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notications when updates become available.2 Chapter 1 Getting started
Rear componentsComponent Function1 Power connector Connects the AC adapter to the monitor.2 HDMI MHL port Connects the HDMI or HDMI/MHL cable from the source device to the monitor.3 DisplayPort Connects the DisplayPort cable from the source device to the monitor.4 USB 3.0 Type-A ports Connects USB devices to the monitor.5 USB 3.0 Type-B port Connects the USB hub cable from the source device to the monitor.6 USB 3.0 Type-C port Connects USB Type-C devices to the monitor.NOTE: This guide describes features that are common to most display products. Some features, colors and icons may be dierent on your display.Product features and components 3
Front and side componentsControl Function1 Audio-out (headphone) jackConnects headphones to the monitor.2 Integrated speakers Provide premium quality sound.3 Audio controls Adjusts the speaker volume up or down.4 Wireless charging base Charges a mobile phone or tablet.5 Menu button Opens and closes the OSD menu.NOTE: To activate the Menu and the Function buttons, press one of the OSD bezel buttons. The button icons will display on the screen.6–8 Function buttons Use these buttons to navigate through the OSD menu based on the indicators above the buttons that are activated while the OSD menu is open.NOTE: You can recongure the Function buttons in the OSD menu to quickly select the most commonly used operations. See Assigning the Function buttons on page 14 for more information.9 Power button Turns the monitor on or o.NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml.4 Chapter 1 Getting started
Setting up the monitorConnecting the cablesNOTE: The monitor ships with select cables.1. Place the monitor in a convenient, well-ventilated location near the computer.2. Connect a video cable for audio/video input.NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the Menu button to access the On-Screen Display (OSD) menu and selecting Input Control.●Connect a DisplayPort cable to the DisplayPort connector on the rear of the monitor and the other end to the DisplayPort connector on the source device.Setting up the monitor 5
●Connect an HDMI/HDMI cable to the HDMI connector on the rear of the monitor and the other end to an HDMI connector on the source device. Or, connect an HDMI/ MHL cable to the HDMI connector on the rear of the monitor and the other end to the MHL connector on the source device.NOTE: There are two HDMI cables included with the monitor, one that connects an HDMI device and one that connects an MHL device.NOTE: The monitor’s USB Type-C port can also function as a DisplayPort audio/video input when connected to a USB Type-C source device.The Auto-Switch Input function switches between the HDMI input and the DisplayPort input. To switch to the USB Type-C input, press one of the OSD bezel buttons to open the OSD menu, and then select Input Control > USB-C Video.6 Chapter 1 Getting started
3. Connect the Type-B connector on the USB upstream cable to the USB upstream port on the rear of the monitor. Then connect the cable’s Type-A connector to the USB downstream port on the source device.NOTE: The monitor’s USB Type-C port can also function as a USB upstream port when connected to a USB Type-C source device.4. Connect one end of the USB Type-C cable to the USB Type-C port on the rear of the monitor and the other end to the USB Type-C port on the USB Type-C device.The monitor’s USB Type-C port can function as a DisplayPort audio/video input, as a USB 3.0 upstream connection, or it can be used to deliver up to 60 watts of power to a device. Power outputs are 5 V / 5.25 V / 9 V / 12 V / 15 V / 20 V , 3 A (60 W Max).NOTE: This guide describes features that are common to most display products. Some features, colors and icons may be dierent on your display.Setting up the monitor 7
5. Connect one end of the AC power cord to the power supply (1) and the other end to a grounded electrical outlet (2), and then connect the DC end of the power supply cord to the monitor (3).WARNING! To reduce the risk of electric shock or damage to the equipment:Do not disable the power cord grounding plug. The grounding plug is an important safety feature.Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.Disconnect power from the equipment by unplugging the power cord from the AC outlet.For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord from the AC outlet, grasp the cord by the plug.8 Chapter 1 Getting started
Adjusting the monitorTilt the display head forward or backward to set it to a comfortable eye level.Turning on the monitor1. Press the power button on the computer to turn it on.2. Press the power button on the bottom right edge of the monitor to turn it on.IMPORTANT: Burn-in image damage may occur on monitors that display the same static image on the screen for 12 or more consecutive hours of nonuse. To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn o the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a “burned-in image” are not covered under the HP warranty.NOTE: If pressing the power button has no eect, the power button lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds.NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of the monitor, and then select Power Control > Power LED > O.Setting up the monitor 9
The monitor automatically scans the signal inputs for an active input and uses that input for the screen.Installing a security cableYou can secure the monitor to a xed object with an optional security cable lock available from HP.10 Chapter 1 Getting started
2 Using the monitorSoftware and utilitiesThe optical disc that comes with the monitor contains les you can install on the computer:●.inf (Setup information le)●.icm (Image Color Matching le), one for each calibrated color spaceThe Setup information leThe .inf le denes monitor resources used by Windows® operating systems to ensure monitor compatibility with the computer’s graphics adapter.This monitor is Windows Plug and Play–compatible, and the monitor will work correctly without installing the .inf le. Monitor Plug and Play compatibility requires that the computer’s graphic card is VESA DDC2–compliant and that the monitor connects directly to the graphics card. Plug and Play does not work through separate BNC-type connectors or through distribution buers/boxes.The Image Color Matching leThe .icm les are data les that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to monitor screen. This le is activated from within graphics programs that support this feature.NOTE: The ICM color prole is written in accordance with the International Color Consortium (ICC) Prole Format specication.Installing the .inf and .icm lesAfter you determine that you need to update, you can install the .inf and .icm les from the optical disc or download them.Installing from the optical discTo install the .inf and .icm les from the optical disc to the computer:1. Insert the optical disc into the computer optical drive. The optical disc menu is displayed.2. View the HP Monitor Software Information le.3. Select Install Monitor Driver Software.4. Follow the on-screen instructions.5. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.NOTE: You may need to install the digitally signed monitor .inf and .icm les manually from the optical disc in the event of an installation error. Refer to the HP Monitor Software Information le on the optical disc.Software and utilities 11
Downloading from the webIf you do not have a computer or source device with an optical drive, you can download the latest version of .inf and .icm les from the HP monitors support web site.1. Go to http://www.hp.com/support.2. Select Get software and drivers.3. Follow the on-screen instructions to select your monitor and download the software.Using the wireless chargerThe monitor’s base includes a wireless charging pad that can be used to charge a mobile phone or tablet. The charger supports Qi and AirFuel inductive technology (5 W).To charge a device, place the device face up in the center of the charging pad and position the device so the charging coils align and the LED is solid amber color.NOTE: The charging Z height distance is 4 mm; make sure the smart phone or tablet is matched to the charging coil and remove the case to get the best charging performance.The LED on the charging pad provides indicators about the status of the device being charged:Device Status LED IndicationUnplugged/O OOn/Ready/Charge complete Solid whiteCharging Solid amberError condition Flashing amberFirmware update in progress Pulsing white12 Chapter 2 Using the monitor
Using the on-screen display (OSD) menuUse the on-screen display (OSD) menu to adjust the monitor screen image based on your preferences. You can access and make adjustments in the OSD menu using the buttons on the monitor's bezel.To access the OSD menu and make adjustments, do the following:1. If the monitor is not already on, press the power button to turn on the monitor.2. To access the OSD menu, press one of the four bezel buttons to activate the buttons, and then press the Menu button to open the OSD.3. Use the three Function buttons to navigate, select, and adjust the menu choices. The on-screen button labels are variable depending on the menu or submenu that is active.The following table lists the menu selections in the OSD main menu.Main Menu DescriptionBrightness Adjusts the brightness and contrast level of the screen.Color Control Selects and adjusts the screen color.Input Control Selects the video input signal.Image Control Adjusts the screen image.Audio Control Selects and adjusts the audio.PIP Control Selects and adjusts the PIP image.Power Control Adjusts the power settings.Menu Control Adjusts the on-screen display (OSD) and Function button controls.Management Enables/disables DDC/CI support, selects the language, and returns all OSD menu settings to the default settings.USB Host Selection Selects USB 3.0 or USB-C as the USB host.Exit Exits the OSD menu screen.Using the on-screen display (OSD) menu 13
Assigning the Function buttonsPressing one of the four OSD bezel buttons activates the buttons and displays the button icons on the screen. The default button icons and functions are shown below.Button Function1 Menu Opens the OSD (on-screen display) menu.2 USB Host(Function button 3 - assignable)Opens the USB Host Selection menu to select the USB upstream host that communicates with the USB downstream ports.NOTE: The USB Host icon is the same whether USB Type C or USB 3.0 is detected as the active USB host.3 Color Control(Function button 2 - assignable)Opens the Color menu to adjust the screen color.4 Next Input(Function button 1 - assignable)Switches to the next video input source (USB-C video, DisplayPort, MHL / HDMI).You can change the Function buttons from their default values so that when the buttons are activated you can quickly access commonly used menu items.To assign the Function buttons:1. Press one of the four front bezel buttons to activate the buttons, and then press the Menu button to open the OSD.2. In the OSD menu, select Menu Control > Assign Buttons and then select one of the available options for the button you want to assign.NOTE: You can assign only the three Function buttons. You can not reassign the Menu button.14 Chapter 2 Using the monitorNew image
Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP)The monitor supports both PIP, where one source is overlaid over another, and PBP, where one source is positioned adjacent to another either horizontally (for landscape orientation) or vertically (for portrait orientation).To use PIP or PBP:1. Connect a secondary input source to the monitor.2. Press one of the four OSD bezel buttons to activate the buttons, and then press the Menu button to open the OSD.3. In the OSD, select PIP Control > Enable PIP, and then select either Picture-in-Picture or 2x1 Dual Split (PBP).4. The monitor will scan the secondary inputs for a valid signal input and use that input for the PIP/PBP picture. If you want to change the PIP/PBP input, select Assign Inputs in the OSD and select the desired input.NOTE: The two PIP/PBP inputs must be either DisplayPort and HDMI, or USB Type-C and HDMI. The monitor does not support PIP/PBP when the two inputs are USB Type-C and DisplayPort.5. If you want to change the size of the PIP, select PIP Size in the OSD, and then select the desired size.6. If you want to adjust the position of the PIP, select PIP Position in the OSD, and then select the desired position.Adjusting to Low Blue Light modeDecreasing the blue light emitting from the display reduces the blue light exposure to your eyes. The monitor provides a setting to reduce blue light output and create a more relaxing and less stimulating image while reading content on the screen. To make the adjustment:●Press one of the four OSD bezel buttons to activate the buttons, and then press the Color Control button and select Low Blue Light.OR●Press one of the four OSD bezel buttons to activate the buttons, and then press the Menu button to open the OSD. In the OSD menu select Color Control > Low Blue Light.Using Auto-Sleep ModeThe monitor supports an OSD (on-screen display) menu option called Auto-Sleep Mode that allows you to enable or disable a reduced power state for the monitor. When Auto-Sleep Mode is enabled, the monitor will enter a reduced power state when the host computer signals low power mode (absence of either horizontal or vertical sync signal).Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned o, and the power LED indicator turns amber. The monitor draws less than 0.5 W of power when in this reduced power state. The monitor will wake from the sleep mode when the host computer sends an active signal to the monitor (for example, if you activate the mouse or keyboard).Auto-Sleep Mode is disabled if the Power Mode is set to Power Saver. You must change the Power Mode to Performance to enable it. Press one of the four OSD bezel buttons to activate the buttons, and then press the Menu button to open the OSD. In the OSD menu select Power Control > Power Mode > Performance.Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP) 15
You can also disable Auto-Sleep Mode when the Power Mode is set to Performance. Press one of the four OSD bezel buttons to activate the buttons, and then press the Menu button to open the OSD. In the OSD menu select Power Control > Auto-Sleep Mode > O.Changing the Power Mode settingBy default, the Power Mode setting in the OSD is set to Power Saver. When Power Saver is on, the monitor USB hub/ports, wireless charging, and power delivery functions are disabled during low power sleep and power o modes. The functions remain enabled when the monitor is in the power on mode.You can enable the USB hub/ports, wireless charging, and power delivery functions during low power sleep and power o modes by changing the Power Mode setting from Power Saver to Performance in the OSD. Press one of the four OSD bezel buttons to activate the buttons, and then press the Menu button to open the OSD. In the OSD menu select Power Control > Power Mode > Performance.16 Chapter 2 Using the monitor
3 Support and troubleshootingSolving common problemsThe following table lists problems, the possible cause of each problem, and the recommended solutions.Problem Possible Cause SolutionScreen is blank or video is ashing.Power cord is disconnected. Connect the monitor power cord.Power button is turned o. Press the monitor power button.NOTE: If pressing the power button has no eect, press and hold the power button for 10 seconds to disable the power button lockout feature.Computer power is turned o. Turn on power to the computer.Video cable is not connected. Connect the video cable between the source device and monitor. Be sure the computer power is o while you connect the video cable.System is in sleep mode. Press any key on the keyboard or move the mouse to exit sleep mode.Video card is incompatible. Replace the video card or connect the video cable to one of the computer’s onboard video sources.System does not wake from sleep mode when the mouse is moved or keyboard is pressed.The monitor Power Saver feature is enabled.Change the Power Mode setting from Power Saver to Performance in the OSD.Open the OSD menu and select Power Control > Power Mode > Performance.Image appears blurred, indistinct, or too dark.Brightness is too low. Open the OSD menu and select Brightness to adjust the brightness scale as needed.Input Signal Not Found is displayed on screen.Monitor video cable is disconnected.Connect the video cable between the computer and monitor. Be sure that the computer power is o while you connect the video cable.No video signal. Be sure the computer has sent out a video signal.Input Signal Out of Range is displayed on screen.Video resolution and/or refresh rate are set higher than what the monitor supports.Change the settings to a supported setting. See Preset display resolutions on page 22 for more information.The monitor is o but it did not seem to enter into sleep mode.The monitor's Auto-Sleep Mode is disabled.Open the OSD menu and select Power Control > Power Mode > Performance.If the Power Mode is set to Performance and auto-sleep still does not function, open the OSD menu and select Power Control > Auto-Sleep Mode and set auto-sleep to On.OSD Lockout is displayed. The monitor's OSD Lockout function is enabled.Press and hold the Menu button on the monitor bezel for 10 seconds to disable the OSD Lockout function.Power Button Lockout is displayed.The monitor's power button lockout function is enabled.Press and hold the monitor power button for 10 seconds to disable the power button lockout function.Solving common problems 17
Button lockoutsHolding down the power button or menu button for 10 seconds will lock out the functionality of that button. You can restore the functionality by holding the button down again for 10 seconds. This functionality is only available when the monitor is powered on, displaying an active signal, and the OSD is not active.Product supportFor additional information on using your monitor, go to http://www.hp.com/support. Select the appropriate support category from the Search all support list, and then enter your model in the search window and click the search button.NOTE: The monitor user guide, reference material, and drivers are available at http://www.hp.com/support. Here you can:●Chat online with an HP technicianNOTE: When support chat is not available in a particular language, it is available in English.●Locate an HP service centerPreparing to call technical supportIf you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call:●Monitor model number●Monitor serial number●Purchase date on invoice●Conditions under which the problem occurred●Error messages received●Hardware conguration●Name and version of the hardware and software you are using18 Chapter 3 Support and troubleshooting
Locating the serial number and product numberThe serial number and product number are located on a label on the bottom edge of the display head and the bottom of the stand’s base. You may need these numbers when contacting HP about the monitor model.Locating the serial number and product number 19
4 Maintaining the monitorMaintenance guidelines●Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.●Use only a power source and connection appropriate for this monitor, as indicated on the label/back plate of the monitor.●Turn the monitor o when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning o the monitor when not in use.NOTE: Monitors with a “burned-in image” are not covered under the HP warranty.●Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.●Keep the monitor in a well-ventilated area, away from excessive light, heat, or moisture.Cleaning the monitor1. Turn o the monitor and disconnect power from the computer by unplugging the power cord from the AC outlet.2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.3. For more dicult cleaning situations, use a 50/50 mix of water and isopropyl alcohol.IMPORTANT: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surface. It may run behind the bezel and damage the electronics.IMPORTANT: Do not use cleaners that contain any petroleum-based materials such as benzene, thinner, or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the monitor.Shipping the monitorKeep the original packing box in a storage area. You may need it later if you move or ship the monitor.20 Chapter 4 Maintaining the monitor
A Technical specicationsNOTE: The product specications provided in the user guide might have changed between the time of manufacturing and delivery of your product.For the latest specications or additional specications on this product, go to http://www.hp.com/go/quickspecs/ and search for your specic monitor model to nd the model-specic QuickSpecs.60.5 cm/23.8-inch modelTechnical specications DisplayType60.5 cm wide screenTFT-LCD23.8-inch wide screenViewable image size 60.5 cm diagonal 23.8-inch diagonalMaximum weight (unpacked) 5.5 kg 12.1 lbsDimensions (include base)HeightDepthWidth42.91 cm21.342 cm54.06 cm16.89 inches8.4 inches21.283 inchesMaximum graphics resolution 2560 × 1440 Optimum graphics resolution 2560 × 1440 Environmental requirements temperatureOperating temperatureStorage temperature5°C to 35°C-20°C to 60°C41°F to 95°F-4°F to 140°FPower source 100–240 VAC 50–60 Hz Power adapter Manufacturer: AcBel Polytech Inc.Vendor P/N: APB002-025H2HP P/N: 901571-4Model number: TPC-AA501Output rating: 19.5V/9.23A Input terminals HDMI MHL, DisplayPort, USB Type-C 60.5 cm/23.8-inch model 21
Preset display resolutionsThe display resolutions listed below are the most commonly used modes and are set as defaults. The monitor automatically recognizes these preset modes, and they will appear properly sized and centered on the screen.60.5 cm/23.8-inch modelPreset Pixel Format Horz Freq (kHz) Vert Freq (Hz)1 640 × 480 31.469 59.9402 720 × 400 31.469 70.0873 720 × 480 31.469 59.9404 800 × 600 37.879 60.3175 1024 × 768 48.363 60.0046 1280 × 720 45.000 60.0007 1280 × 768 47.396 59.9958 1280 × 800 49.702 59.8109 1280 × 960 60.000 60.00010 1280 × 1024 63.981 60.02011 1366 × 768 47.712 59.79012 1440 × 900 55.935 59.88713 1440 × 900 55.469 59.90114 1600 × 900 60.000 60.00015 1600 × 1200 75.000 60.00016 1680 × 1050 65.290 59.95417 1920 × 1080 67.500 60.00018 1920 × 1200 74.038 59.95019 1920 × 1200 74.556 59.88520 2560 × 1440 88.787 59.951Entering user modesThe video controller signal may occasionally call for a mode that is not preset if:●You are not using a standard graphics adapter.●You are not using a preset mode.It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, and then recognizes the new mode just as it does a preset mode. In addition to the factory preset modes, there are at least 10 user modes that can be entered and stored.22 Appendix A Technical specications
Energy saver featureThe monitor supports a reduced power state. The reduced power state is initiated if the monitor detects the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned o, and the power light changes to amber. When the monitor is in the reduced power state, it will utilize 0.5 watts of power. There is a brief warm-up period before the monitor returns to its normal operating mode.Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).NOTE: The above power saver feature only works when the monitor is connected to a computer that has energy saver features.By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber.Energy saver feature 23
B AccessibilityHP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices.Supported assistive technologiesHP products support a wide variety of operating system assistive technologies and can be congured to work with additional assistive technologies. Use the Search feature on your source device that is connected to the monitor to locate more information about assistive features.NOTE: For additional information about a particular assistive technology product, contact customer support for that product.Contacting supportWe are constantly rening the accessibility of our products and services and welcome feedback from users. If you have an issue with a product or would like to tell us about accessibility features that have helped you, please contact us at (888) 259-5707, Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. If you are deaf or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical support or have accessibility questions by calling (877) 656-7058, Monday through Friday, 6 a.m. to 9 p.m. Mountain Time.24 Appendix B Accessibility
Europe – EU Declaration of Conformity This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU): Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement: This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-216 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Taiwan:低功率電波輻射性電機管理辦法第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。Wireless Charger WarningThe product comply with the FCC/ISED RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure that compliance was demonstrated at 10cm and greater separation from the user body or set the device to lower output power if such function is available.

Navigation menu