Top Victory Electronics WSDB675GN 802.11a/b/g/n +Bluetooth 4.0(HS) 1T1R SDIO Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2044055
Application ID	xKovvlLlnTsLUQKist/K8Q==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.91kB (948881 bits)
Date Submitted	2013-08-15 00:00:00
Date Available	2013-08-15 00:00:00
Creation Date	2013-07-17 06:09:04
Producing Software	doPDF Ver 6.0 Build 262 (Windows Vista x64)
Document Lastmod	2013-08-15 16:53:09
Document Title	Microsoft Word - WSDB-675GN Hardware & Software User Guide_ENG_V0.1_20130626.doc
Document Creator	Microsoft Word - WSDB-675GN Hardware & Software User Guide_ENG_V0.1_20130626.doc
Document Author:	a168

WSDB-675GN
Hardware & Software Setup Guide
Rev. 0.1
Proprietary & Confidential Information
Doc. NO:
1. WLAN Function Quick Start Guide
Physical hardware configuration likes as figure1. Please follow the following procedure step by
step to get starting WLAN function.
SDIO Board
Software setup:
Follow driver installation procedure steps to install the GB86302X0 driver on your PC (OS: XP).
 1-1.Copy
WDSB-675GN\WSDB-675GN_Driver_V1.2_10122012\Nvram\20130429_GB86302X_nvram.T
XT to C:\Windows\system32\Drivers
1-2. Copy
WDSB-675GN\WSDB-675GN_Driver_V1.2_10122012\BCM4330_WinXP_MFG_5.90.125.120(
A2)\Apps\ wl.exe to C:\Windows\system32\
 1-3.In Device Manager, choose SDA Standard Compliant SD Host Controller and click right button of
mouse and then choose Update driver
Proprietary & Confidential Information
Doc. NO:
 1-4.Choose No, not now, and then click Next.
 1-5.Choose install from a list or specific location (Advanced), and then click Next.
Proprietary & Confidential Information
Doc. NO:
 1-6.Choose Don’t search, I will choose driver to install, and then click Next.

 1-7.Click Have Disk .

Proprietary & Confidential Information
Doc. NO:
 1-8.Click Browse to choose correct directory of Driver
WDSB-675GN\WSDB-675GN_Driver_V1.2_10122012\BCM4330_WinXP_MF
G_5.90.125.120_A2(Driver) \bcmsddhd.inf and then click OK to next step.

 1-9.Choose Broadcom 802.11g Network Adapter and click Next to install driver.

Proprietary & Confidential Information
Doc. NO:
 1-10.Click Finish and you can check the device is working fine in Device Manager.
 1-11.In Device Manager, Choose Broadcom 802.11g Network Adapter
right button of mouse and then choose content.
Proprietary & Confidential Information
Doc. NO:
and click
 1-12.In the tab of Advanced, choose
 1-13.In the tab of Advanced, choose 4330ROMImagePatch item and replace with
\SystemRoot\system32\drivers\ 20130429_GB86302X_nvram.TXT and then
click OK button.
Proprietary & Confidential Information
Doc. NO:
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Proprietary & Confidential Information
Doc. NO:
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for
any additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can not
be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may
be installed such that 20 cm may be maintained between the antenna and users.
The final end product must be labeled in a visible area with the following: “Contains
FCC ID: ARS-WSDB675GN”. The grantee's FCC ID can be used only when all FCC
compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Declaration for no non-US channel operation
We, Top Victory Electronics (Taiwan) Co Ltd. declare that the device does not support any
non-US channels in all the operational mode(s) for the following products.
Proprietary & Confidential Information
Doc. NO:
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Proprietary & Confidential Information
Doc. NO:
This device is intended only for OEM integrators under the following conditions: (For module
device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna
and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour
utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée
entre l'antenne et les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur
l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours
responsable des essais sur son produit final pour toutes exigences de conformité
supplémentaires requis pour ce module installé.
Proprietary & Confidential Information
Doc. NO:
10
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the Canada authorization is
no longer considered valid and the IC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines
configurations d'ordinateur portable ou de certaines co-localisation avec un autre
émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut
pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera
chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation
distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: “Contains IC:
9190A-WSDB675GN”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où
l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue
entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible
avec l'inscription suivante: "Contient des IC: 9190A-WSDB675GN".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Proprietary & Confidential Information
Doc. NO:
11
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur
final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de
l'utilisateur du produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires
requises et avertissements comme indiqué dans ce manuel.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de
haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour
les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.
Proprietary & Confidential Information
Doc. NO:
12
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。
2. 系統廠商應於平台上標示「本產品內含射頻模組：
XXXyyyLPDzzzz-x」
字樣。
Proprietary & Confidential Information
Doc. NO:
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:07:17 06:09:04Z
Creator Tool                    : Microsoft Word - WSDB-675GN Hardware & Software User Guide_ENG_V0.1_20130626.doc
Modify Date                     : 2013:08:15 16:53:09+08:00
Metadata Date                   : 2013:08:15 16:53:09+08:00
Format                          : application/pdf
Creator                         : a168
Title                           : Microsoft Word - WSDB-675GN Hardware & Software User Guide_ENG_V0.1_20130626.doc
Producer                        : doPDF   Ver 6.0 Build 262 (Windows Vista  x64)
Document ID                     : uuid:dfa56604-3b6d-411b-8965-a23aa764e1ee
Instance ID                     : uuid:71264ca5-4160-4705-84ef-605838ad67b9
Page Count                      : 14
Page Layout                     : OneColumn
Author                          : a168

EXIF Metadata provided by EXIF.tools