TopSeed Technology TSAZ-904 Wireless Keyboard User Manual RF Keyboard KBAZUS22 904 912MHz Spec
TopSeed Technology Corp. Wireless Keyboard RF Keyboard KBAZUS22 904 912MHz Spec
Manual
TopSeed Technology Corp. 9F-3, No. 16, Jain Ba Rd., Chung Ho City, Taipei Hsien, Taiwan 235, R.O.C. TEL: +886-2-8226-3811 FAX: +886-2-8226-3822 APPROVAL SHEET No: Date: 2002/08/16 .… … … … … … … … … … … … … … … … … Customer: Customer Part No: Parts Name: Part No.: Spec. No.: Note: RF Keyboard-FSK (912MHZ) KBAZUS22-904 TSAZ-904 Signature For Return APP’D CHK’D DSG’D TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 2/21 DATE: 2002/08/16 TABLE OF CONTENTS 0.Table of date revision 1.FCC GUIDELINES 2.Description 3.Physical Description and Specification 3-1 Dimensions 3-2 Weight 4.RF Keyboard Specification 4-1 Main Feature 4-2 RF Characteristics 5.Electronical Block Diagram 5-1 FSK (912MHZ) Transmitter 5-2 FSK (912MHZ) Receiver Table of date-revision △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 3/21 DATE: 2002/08/16 TABLE OF CONTENTS 6.Electrical Characteristics 6-1 GENERAL SPECIFICATION 6-2 Operational Range 6-3 Electrostatic Discharge (ESD) Sensitivity 6-4 AC/DC Characteristics 6-5 Membrane Switch Specifications 7. Endurance Test 7-1 Test conditions 7-2 Low Temperature Test 7-3 High Temperature Test 7-4 Humidity Test 7-5 Temperature Cycline Test 7-6 Vibration Test 7-7 Drop Test 7-8 Character Endurance Test 8. Mechanical Requirement 8-1 Operating Force 8-2 Operating Travel 8-3 Feeling 8-4 Operation Life 8-5 Keytop Alignment Requirement 8-6 Key Pitch 9. Assembly & Packing Drawing △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 4/21 DATE: 2002/08/16 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 5/21 DATE: 2002/08/16 2. Description: The Topseed RF Keyboard is a FSK (Frequency Shift Key) Transmitter for the frequency band 902-928 MHz. The RF Keyboard offers a full-integrated PLL synthesizer and a high efficiency power amplifier to drive a loop antenna; A special circuit design and a unique power amplifier design are used to save current consumption and to save battery live. This keyboard specification applies 88/89 key membrane keyboard that is fully compatible with IBM PC AT system. FSK-550 series keyboard are silent -touch and spill-resistant. For the Receiver Modular use with USB 1.1 compliant can be easily actuated without affecting the position of the Keyboard. Note that the Channel button (Red button) on the receiver should flash any time the Cordless device is moved or a button is pressed. Then, it will remember your product ID and Channel ID The Radio Frequency designed in this Version of RF Keyboard is FSK 912MHz and can be use in a range to about 10 Meter from the Receiver at any directions. The Keyboard can operate for 10-12 months with two AA Alkaline batteries. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 6/21 DATE: 2002/08/16 3. Physical Description and Specification: 3.1 Dimensions The approximate dimensions of the Keyboard’s transmitter is as follows: Length 289 mm Width 163.6 mm Height 27 mm 3.2 Weight The approximate dimensions of the Keyboard’s transmitter is as follows: Weight of the RF Keyboard not to exceed 950 grams (with batteries). △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 7/21 DATE: 2002/08/16 4.RF Keyboard Specification 4-1 Main Feature The RF Keyboard consists of three major parts; a baseband controller, a radio that suitable for America available 902–928 MHz frees ISM band applications, and a low power uC-controlled, includes RF antenna supporting circuitry, together with basic RF software level. 4-1 Range in meters: About 10 Meter from the Receiver 4-2 Frequency Range: 912MHz+/-50KHz (64 channels ID for Keyboard) 4-3 Data transmitting by transistor module 4-4 Operational voltage: 3.0 V 4-5 Low power cons umption: on normal operation 4 mA and 10 uA on sleep mode. 4-6 Scrolling by mechanical encoder (24 detents every circle) 4-7 Support Power down Mode and high efficiency power amplifier. 4-8 Receiver Fully Compliant Low Speed (1.5Mbps) USB 1.1 Interface 4-9 Suspend/resume operation and device remote wakeup 4-10 Two channel ID selectable by slide switch △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 8/21 DATE: 2002/08/16 4.RF Keyboard Specification 4-2 RF Characteristics Frequency Range Modulation Channel No. Channel I.D Operation Voltage Battery Batter Life TX Power Transmission rate TX FM frequency deviation Frequency tolerance Key Num. Transmission Distance △ 912 MHz FSK 6 bits → 64 3V AA*2 Alkaline batteries. 10 - 12 months < 0dBm (1mW) 6K bps +/- 60 KHz +/- 20ppm 88/89 10 Meter APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 9/21 DATE: 2002/08/16 5. Electrical Block Diagram 5-1 FSK (912MHZ) Transmitter △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 10/21 DATE: 2002/08/16 5-2 FSK (912MHZ) Receiver USB 1.1 compliant The module is a USB high-speed class device (12 Mbps) and has the full functionality of a USB slave △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 11/21 DATE: 2002/08/16 6. Electrical Characteristics: 6.1 GENERAL SPECIFICATION 6.1.1 Operation temperature range : -10 ~ + 55 ℃ 6.1.2 Storage temperature range : - 25 ~ + 65 ℃ 6.1.3 Relative humidity range : 10 %~ 95 % RH 6.2 Operational Range Parameter Min 2.3 Supply Voltage Frequency (US) Max 3.6 912MHz+/-50KHz Ambient temperature -10 60 Unit MHZ ℃ 6.3 Electrostatic Discharge (ESD) Sensitivity Direct discharge: Test Voltage: Not less than 8 KV for Air discharge Not less than 4 KV for Contact discharge Indirect discharge: Test Voltage: Not less than 4 KV for HCP Not less than 4 KV for VCP △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 12/21 DATE: 2002/08/16 6.4 AC/DC Characteristics Supply Voltage: VS= 3.0 V Parameter Current Consumption Min Typ Max Unit Sleep mode 10 uA Transmit Mode mA Data rate Sensitivity 6K bps -102 dbm 2.2 ms Transmitter settling time Power amplifier output -4 Output power (Transmit mode) -2 dbm mW 6.5 Membrane switch specifications: 6.5.1 Electrical requirements: (1). Max rating: DC 3.6V, 0.3 mA Recommendation: DC 3V, 0.1 mA (2). Contact resistance: (include line resistance) Less than 300 Ohm under the condition of making contact with 150 grams of depressing force onto center of the key switch. (3). Chattering (bounce): 15ms Max at on and off point (4). Insulation resistance: DC 125V 10M Ohm Min. (5). Withstand: AC 250V 50Hz or 60 Hz. 1 minute. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 13/21 DATE: 2002/08/16 6.5.2 Mechanical requirements: (1). Membrane structure: (2). Composition properties Line/space resolution: Silver content: Resistively: 0.1 mm 70 +/- 1 % <= 0.01 Ohm/Sq. AT 0.025mm (3). Thickness of plastics film Top circuit layer: Spacer layer: Bottom circuit layer: 0.075 mm 0.1 mm 0.1 mm (4). Action force: 15 g MIN. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 14/21 DATE: 2002/08/16 6.5.3 Keyboard structure: This keyboard is in membrane type with tactile feeling, its structure is as following 1.Keytop 2.Plunger 3.Housing frame 4.Rubber dome 5.Membrane switch 6.Bottom plate △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 15/21 DATE: 2002/08/16 7.Endurance test 7-1. Test conditions Test and measurements shall be made in following standard conditions unless otherwise specified: Normal temperature: +5 to +35 ℃ Normal humidity: Normal pressure: 45% to 85% RH 860 to 1060 MB 7-2. Low temperature test: Measurement after the test with following conditions and lefts in chamber (normal temp, normal humidity) for one hour. (1). Temperature: -25 +/- 2 ℃ (2). Time: 72 hours (3). Dew condensation shall be removed. 7-3. High temperature test Measurement after the test with following conditions and lefts in chamber (normal temp, normal humidity) for one hour (1). Temperature: + 65 +/- 2 ℃ (2). Time: 72 hours 7-4. Humidity test Measurement after the test with following conditions and lefts in chamber (normal temp, normal humidity) for 24 hours. (1). Temperature: +50 +/- 2 ℃ (2). Relative humidity: 90 to 95% RH (3). Time: 72 hours (4). Dew condensation shall be removed. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 16/21 DATE: 2002/08/16 7-5.Temperature cycling test Measurement after the test (temp cycles =4) and left in chamber (normal temp, normal humidity) for one hour. 7-6.Vibration test Storage: Operation: 10 to 300 Hz, 2.0 G 1 hour per axis 10 to 500 Hz, 0.5 G 1 hour per axis 7-6-2 Shock test Storage: Operation: 60G 1/4sines wave pulses, 11 ms DURATION 5G 1/4sines wave pulses, 11 ms DURATION △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) 7-7. PAGE: 17/21 DATE: 2002/08/16 Drop test The package carto n, on the condition of 91cm height, after 1 corner, 3 edges, and 6 faces dropping, electrical and mechanical characters will still be in normal conditions. 7-8. Character endurance test: 7.8.1. Rubber eraser: Material: Lion #510 for pencil Speed: 2 Round per second Stroke: 20mm Force: 200 gf Cycle: 600 time Judgement: legend shall be legible and have no crack 7.8.2. Alcohol Material: flannel soaked with ISOPROPYL alcohol Speed: 2 Round per second Stroke: 20mm Force: 200 gf Cycle: 60 time Judgement: legend shall be legible and have no crack 7.8.3 Neutral detergent Material: flannel soaked with neutral detergent Speed: 2 Round per second Stroke: 20mm Force: 200 gf Cycle: 120 time Judgement: legend shall be legible and have no crack △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 18/21 DATE: 2002/08/16 7.8.4.Pencil hardness There shall be no legend peel off when a pencil (manufacturer name: Mitsubishi type in hardness type b whose load shall be cut at right angle shall be applied to the legend in a direction of 45 degree. Pressure: approx. 1 kg. (Lead shall not be snapped.) Speed: 0.5mm/sec Test cycle: 1 time Legend Keyto △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 19/21 DATE: 2002/08/16 8.Mechanical requirement: 8-1. Operating force Normal key: Peak force 55 g+/- 10 g Special key: Peak force 65 g +/- 15g 8-2. Operating travel Full travel: 3.0 +/- 0.3mm Peak travel: 0.8 +/- 0.3 mm 8-3. Operating life: Over 5 million cycles under the condition of DC 5V 0.1mA load with 4 cycles/sec depress speed. 8-4. Feeling Tactile feeling without sticky at any point of keytop under the condition of 4 cycles/sec of depressing speed. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 20/21 DATE: 2002/08/16 8-5.Keytop alignment 8-5-1.Shift of keytops Less than 0.5 mm for full amplitude on both X and Y directions. 8-5-2.Angle twist of keytop The twist of the keytops shall be less than 0.5mm 8-5-3.Slant The slant of the keytops shall be less than 0.5mm 8-5-4.Height diversity It shall be less than 0.5mm from neighboring keytops in the same row. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ) TopSeed Technology Corp. SPECIFICATION FOR RF Keyboard-FSK (912MHZ) PAGE: 21/21 DATE: 2002/08/16 8-5-5.Line diversity It shall be less than 0.5mm from neighboring keytops. 8-5-6.Gap between keytops: More than 0.3 mm 8-6.Key pitch: 19.00mm NOTE: When using RF products, keep away from hi-frog electric products. △ APPD. CHKD. DSGD. SPEC. NO. △ △ SYMB. PAGE DATE APPD. SHKD. OSGD. TSAZ-904 RF Keyboard FSK (912MHZ)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 2002:08:21 10:29:49Z Modify Date : 2002:08:21 14:39:49+08:00 Page Count : 21 Creation Date : 2002:08:21 10:29:49Z Author : amenchi Producer : Acrobat PDFWriter 4.0 for Windows NT Mod Date : 2002:08:21 14:39:49+08:00 Metadata Date : 2002:08:21 14:39:49+08:00 Title : RF Keyboard-KBAZUS22-904_912MHz_ Spec.PDF Creator : amenchiEXIF Metadata provided by EXIF.tools