TopSeed Technology TSIH-2404 RF Receiver User Manual A26381 K440 Z200 1 7619

TopSeed Technology Corp. RF Receiver A26381 K440 Z200 1 7619

User Manual

Presenter IV AirOperating Manual Peripherals
Are there ... ... any technical problems or questions relating to the product? Please contact: ● our Service Desk ● your Sales Partner ● your Sales Outlet The latest information on our products, as well as tips, updates etc., can be found on the internet at http://ts.fujitsu.comService Desk on the Internet: http://ts.fujitsu.com/support/servicedesk.html
Copyright © Fujitsu Technology Solutions 2009 2009/09Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, GermanyContact http://ts.fujitsu.com/supportAll rights reserved, including intellectual property rights. Technical data subject to modi cations and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see http://ts.fujitsu.com/terms_of_use.htmlOrder-No. Fujitsu Technology Solutions: A26381-K440-Z200-1-7619, Edition 1
Presenter IV Air Operating Manual Fujitsu Presenter Setting up the device Troubleshooting and tips Technical Data September 2009 edition
Windows 7, Windows Vista and Windows XP are trademarks of Microsoft Corporation. All other product and service marks referred to in this publication are trademarks of the respective owners, whose legal protection is hereby recognised. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights, including translation or reproduction (printing, copying or similar) of this manual in part or in whole, are reserved. Noncompliance is subject to compensation for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery is subject to availability of the product. Subject to technical modifications.
Contents Fujitsu Presenter... ............................................................................................................................. 1 Delivery package.......................................................................................................................... 2 Notational conventions ......................................................................................................................... 3 CE marking................................................................................................................................... 3 Disposal of waste electrical and electronic equipment................................................................. 3 Transportation .............................................................................................................................. 3 Safety notes.................................................................................................................................. 4 FCC Compliance Statement................................................................................................................. 5 Setting up the device.......................................................................................................................... 6 Installing Batteries ........................................................................................................................ 6 Synchronizing the Mini-receiver with the computer...................................................................... 6 Fujitsu Presenter basic operation................................................................................................. 7 Presenter Mode .................................................................................................................................... 8 Game Mode.......................................................................................................................................... 9 User information about Fujitsu Presenter ........................................................................................... 10 Troubleshooting and tips................................................................................................................. 11 Fujitsu Presenter cannot be used. Why? ................................................................................... 11 Fujitsu receiver LED is not on .................................................................................................... 11 Technical data................................................................................................................................... 12 Terms of responsibility........................................................................................................................ 13 Fujitsu Technology Solutions
Contents Fujitsu Technology Solutions
Fujitsu Presenter... Fujitsu Presenter... Congratulations on your purchase of the Fujitsu Presenter for amazing user experience of presenter, wireless game controller and air mouse functions. Before use, please review the user manual carefully and follow the instructions. In addition, keep this manual in a safe location for future reference. LASER RADIATION DO NOT STARE INTO BEAMMAX OUTPUTF1mW WAVE LENGTH F650 ± 20nmCLASS 2 LASER PRODUCT This product is complied with 21 CFRpart 1040. 10Made in Ch inaMode l:T SIX- 2401This d evice c omplie s with Part 1 5 of FCC Ru les See in struct ion manu al.S/ N:YYXX XX XXFCC ID :PTITS IX-2 4011211121314345678910 1 = Page up 2 = Mouse right key 3 = Volume up 4 = Blank page 5 = Volume down 6 = F5/ESC 7 = Laser 8 = Page down 9 = Mouse left key 10 = Mouse On/Off 11 = Presenter Mode 12 = Game Mode 13 = Power Off 14 = Connect Button Fujitsu Technology Solutions 1
Fujitsu Presenter... Mini Receiver Shows the status of the Fujitsu Presenter. LED is lit when the presenter is on. 12 1 = Connect Button 2 = LED Delivery package Make sure the following components are in the package or otherwise contact your dealer for assistance. ● Fujitsu Presenter ● Mini-receiver ● Two AAA Alkaline Batteries ● Quick Start Guide and Helpdesk Flyer ● CD 2 Fujitsu Technology Solutions
Fujitsu Presenter... Notational conventions The following conventions apply in this manual: ! indicates information that refers to risks of injury. i indicates information that must be complied with to ensure the correct use of the system. ► indicates procedures that must be carried out. This font indicates programme names, commands or menu options. "Quotation marks" are used for names of chapters, data carriers or terms that require emphasis. CE marking At the time of delivery, the device complies with the following EU directives: Directive 2004/108/EC of the European Parliament regarding the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006/95/EC of the European Parliament regarding the approximation of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits. Disposal of waste electrical and electronic equipment This device must not be disposed of with household waste. The device is subject to Directive 2002/96/EC of the European Parliament and the Council dated January 27, 2003 regarding waste electrical and electronic equipment. This directive contains provisions which apply throughout the EU regarding the return and recycling of waste equipment. To return your used device, please use the return and collection systems available to you. You will find further information on this at http://ts.fujitsu.com/recycling. Transportation Transport the device only in its original packaging or other suitable packaging to protect it from knocks and jolts. The device should only be unpacked at the location where it is to be used. ! Fujitsu Technology Solutions 3
Fujitsu Presenter... Safety notes Batteries ● If any battery leakage occurs, thoroughly wash the affected surfaces with a large amount of water and immediately obtain medical treatment. ● Do not dispose of batteries in a fire. ● Do not use deformed or non-assigned batteries. ● Do not use metal to short the positive (+) and negative (-) ends. ● Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are in their correct positions. ! i ● Do not mix used and new batteries, and do not mix different brands of batteries. ● Do not recharge alkaline or non-rechargeable batteries. ● Do not leave batteries in the device for long periods of non-use. ● Do not use damaged, deformed or leaking batteries. ● If battery leakage occurs in the device, stop usage immediately and send it to the Fujitsu maintenance center for inspection. ● The device uses AAA batteries or AAA rechargeable nickel metal hydride (NiMH) batteries. If you use rechargeable NiMH batteries, be sure to follow the manufacturer’s guidelines for safe and proper usage. ● Do not use batteries in locations where the temperature rapidly changes. ● When disposing of the batteries, follow the regulations of your local government. Laser Pointer Misuse the Laser Pointer with procedures other than those specified herein may result in hazardous radiation exposure. ● Do not stare into beam. ● Do not shine a laser pointer at anyone. ● Do not allow children to use a laser pointer without supervised. ● Do not point a laser pointer at a mirror-like surface. i 4 Fujitsu Technology Solutions
Fujitsu Presenter... FCC Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-Causing Equipment Regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in strict accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between equipment and the receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may violate FCC rules. Contact persons Applicant for this device: Fujitsu Technology Solutions GmbH Bürgermeister-Ulrich-Str. 100 86199 Augsburg Germany Alexander Peschka Responsible Party (US): Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085 U.S.A. Bernd Henning Phone No.: (408) 329-6737 Fax No.: (408) 746-8299 Fujitsu Technology Solutions 5
Setting up the device Setting up the device Installing Batteries The device uses two AAA batteries. Fujitsu recommends high quality alkaline batteries for best performance and longevity of battery life. If you use rechargeable nickel metal hydride (NiMH) batteries, be sure to follow the manufacturer’s guidelines for safety and proper usage. ► Remove the battery cover and put in two AAA alkaline batteries. Be sure to insert the negative (-) end first when inserting new batteries, and remove the plus (+) end first when replacing the batteries. ► Replace the battery cover, ensure that it slides closed with a “click”. Synchronizing the Mini-receiver with the computer i ► The pairing between the Fujitsu Presenter and mini-receiver is completed by factory. In the event that the Presenter does not sync with the receiver, refer to the following instructions: ► Make sure the computer power is on. ► Insert the mini-receiver in a USB port and press the Connect button once. At this time, the receiver LED will flash slowly. ► Make sure the Fujitsu Presenter is in either Game mode or Presenter mode. ► Press the Connect button on the presenter once. The blue LED on the receiver will then flash quickly and the synchronizing is completed now. After a successful connection, the receiver LED will stay on all the time. If you do not have a successful connection, repeat above steps. 6 Fujitsu Technology Solutions
Setting up the device Fujitsu Presenter basic operation There are two modes of this product: ● Presenter mode (Presenter and Air Mouse functions are available) ● Game mode (Standard Microsoft wireless game controller function is available) 123 1 = Presenter Mode 2 = Game Mode 3 = Power Off Mode Switch ► Use the switch to change modes you want or turn off the presenter. Presenter mode ► Change the switch to Presenter mode on the Fujitsu Presenter. Fujitsu Technology Solutions 7
Setting up the device Presenter Mode 12345678910 1 = Page up 2 = Mouse right key 3 = Volume up 4 = Blank Page 5 = Volume down 6 = F5/ESC 7 = Laser 8 = Page down 9 = Mouse left key 10 = Mouse On/Off UP Power point page up RIGHT Mouse right key Volume up Power point volume up Blank page Power point blank page Volume down Power point volume down F5/ESC Power point F5 and ESC Laser Laser on / off button DOWN Power point page down LEFT Mouse left key Mouse Double click for turn on the cursor automatically. Press and hold for semi-automatically 8 Fujitsu Technology Solutions
Setting up the device Game Mode ► Change the switch to Game mode on the Fujitsu Presenter. The Fujitsu Presenter will only work on the PC in games that support “Microsoft Standard Game Controller” while switch to Game mode. i 12345678910 1 = Up 2 = Left 3 = Button 4 4 = Button 5 5 = Button 6 6 = Button 3 7 = Button 2 8 = Right 9 = Down 10 = Button 1 UP Microsoft standard game controller button up RIGHT Microsoft standard game controller button right Button 4 Microsoft standard game controller button 4 Button 5 Microsoft standard game controller button 5 Button 5 Microsoft standard game controller button 6 Button 3 Microsoft standard game controller button 2 Button 2 Microsoft standard game controller button 2 DOWN Microsoft standard game controller button down LEFT Microsoft standard game controller button left Button 1 Microsoft standard game controller button 1 i Make sure your software supports Microsoft Standard Game Controller. The function of the game pad buttons may vary in different games. Read the manual of your games carefully to set the best game settings before proceeding to game settings. Fujitsu Technology Solutions 9
Setting up the device User information about Fujitsu Presenter ► Facing the computer screen, the distance between the receiver and the tip of the Fujitsu Presenter should be maintained at 1~5 meters. ► Make sure there are no people or objects at arms length between the Fujitsu Presenter and the receiver. ► If there is any equipment that may interfere with the radio frequency in the surrounding area of the Fujitsu Presenter and the receiver, keep a distance from that area or stop using the other devices. The Fujitsu Presenter must be synchronized with the mini receiver for usage. A successful synchronization will keep the receiver LED on at all times. If the first connection fails, refer to section “Synchronizing the Mini-receiver with the computer” and follow the steps again. i 10 Fujitsu Technology Solutions
Troubleshooting and tips Troubleshooting and tips If any of the following situations occur while using the Fujitsu Presenter, refer to the following Q&A list for help: Fujitsu Presenter cannot be used. Why? Cause Troubleshooting Is the Fujitsu Presenter power on? ► Make sure the Fujitsu Presenter power is on. If so, make sure the batteries are correctly positioned in the Fujitsu Presenter. Is the Fujitsu Presenter in standby mode? ► If the Fujitsu Presenter has not been used for 60 seconds, it will enter standby mode. Press any button of the Fujitsu Presenter to re-activate it. Is the receiver plugged in? ► Make sure the receiver is plugged-in correctly and the LED is always on. Is there any interference with the position of the receiver? ► Remove any obstacles in front of the receiver and make sure you can clearly see the front of the receiver. Is the distance between the Fujitsu Presenter and the receiver too close or too far? ► Keep a distance between the Fujitsu Presenter and the receiver of 1~5 meters. Fujitsu receiver LED is not on Cause Troubleshooting Is the power on? ► Make sure the computer power is on and the Fujitsu Presenter is not in the Power Off mode. Is the distance too far? ► If the Fujitsu Presenter is too far away, the receiver cannot detect it. Maintain a distance between the Fujitsu Presenter and the receiver of 1~5 meters. Has the synchronization of the Fujitsu Presenter failed? ► Refer to section “Synchronizing the Fujitsu receiver with the computer” for synchronization information. If any of the above solutions do not correct your problem or you have a question, visit our website, “http://support.ts.fujitsu.com”, for supplemental and/or updated information about our product. i Fujitsu Technology Solutions 11
Technical data Technical data General Interface Compatible with USB 1.1 and 2.0 Frequency Band 2,402~2,480 GHz Data rate (maximum) 2 Mbps Laser class Class 2 laser, red Power supply 2 x AAA alkaline batteries Battery life 95 Hr (under 2200 mA/h battery for max. continuous operating mode) Operating range 10 m (depending on radio interference in the vicinity) Dimensions and weight Dimension (L x W x H) 108.5 x 38 x 22.5 mm Weight Approx. 70 g (including 2 alkaline batteries) Current consumption Presenter mode ● Active mode: approx. 6.4 mA ● Sleep mode: approx. 1 uA ● Laser pointer active: approx. 23 mA Game mode ● Active mode: approx. 6.4 mA ● Sleep mode: approx. 1 uA Receiver ● Active mode: 25 mA ● USB suspend: 1 mA 12 Fujitsu Technology Solutions
Technical data Terms of responsibility In addition to the relevant laws and regulations, the following situations are not included in the warranty scope or liability of the company: ● Product damage that has resulted from inappropriate product usage. ● Product damage that has resulted from product repair without written authorization of the company. ● User-inflicted product damage. ● Product damage that has resulted from using the product in an abnormal environment. ● Product damage caused by natural disasters. ● Products without Fujitsu-issued serial numbers. ● Damage caused by using software or an object not provided by the company. ● Samples, testers, non-mass production products and software. ● Products under an expired warranty. The liabilities of the company only include direct and actual damage. It does not include indirect, incidental or special damage (such as expected profit loss and moral damage compensation) and punitive damages. In addition to other regulations, the liabilities of the company to users will require the company, at most, to replace the Fujitsu Presenter with the latest model. Fujitsu Technology Solutions 13

Navigation menu