Topcell Technology CCM03 Bluetooth Headset User Manual Exhibit E User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	376575
Application ID	OOBWE8YNilqwL55UMLMwDA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	114.16kB (1426948 bits)
Date Submitted	2003-11-26 00:00:00
Date Available	2003-11-26 00:00:00
Creation Date	2003-11-26 14:46:36
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-11-26 14:46:36
Document Title	Exhibit-E-User's Manual.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	MKuo

OPERATING INSTRUCTION FOR WIRELESSF HEADSET
CHARGING
- The red light is displayed during charging. It turns off when the battery is fully charged.
BATTERY LOW
- When the battery is running out of power, the red light flashes every 2 seconds and the low tone
beeps each 5 seconds.
TURN ON
- Press and hold function key for 2 seconds. The blue light flashes 5 times briefly and rapidly, then
blue light flashes one time every 3 seconds. The headset beeps twice with the high tone.
TURN OFF
- Press and hold function key for 2 seconds. The red light flashes 5 times briefly and rapidly, then red
light turns off. The headset beeps twice with the low tone.
PAIRIN G
- Please keep the distance at least 15 cm between headset and your Bluetooth phone for pairing.
- Tm'n off the headset before pairing.
- Press and function key for 2 seconds, the blue light flashes 5 times briefly and rapidly, then the red
light and blue blight flash in turn to indicate the headset is ready for pairing. The headset beeps 2
times with the high tone for twiee‘
- Start the pairing process according to the user’s manual of Bluetooth phone. The pass code is 0000.
- Your phone will find the “Pioneer Headset” afier you selected the “Discover” in your Bluetooth
phone to search a Bluetooth device. Confirm this.
- Enter the pass code 0000.
- You can check the phone if pairing was successful
- If pairing was unsuccessful in 60 seconds, headset will leave pairing mode automatically.
MAKING A CALL
- Using the key pad of phone
- Turn on the headset and make the call by using your phone in the normal way.
- Using voice dialing
I. This function is only available if your phone supports voice dialing.
2. You have to set up voice tag on your phone before activate voice dialing.
3. Turn on the headset.
4. Press and release function key, you will hear atone to indicate that you can say the desired name
(voice tag).
5. Say the voice tag
ANSWERING A CALL
- Press and release function key after you hear the ring tone. The blue light flashes briefly and
rapidly 4 times every 3.5 seconds during the conversation. The headset beeps once with the high
tone.
ENDING A CALL
- Press and release function key, the blue light flashes every 3 seconds. The headset beeps once with
the high tone. '
OR
~ End the call by using your phone in the normal way.
CALL-WAITING
Press and release function key once to switch between calls. The headset beeps once with the high tone
when pressing function key.
ADJUSTING THE EARPHONE VOLUME
Press the volume up key to increase or the volume down key to decrease the volume. The headset
beeps once for each adjustment with high tone.
MUTE
1. Press and hold either the volume up key or the volume down key for 2 seconds to mute the call.
The headset beeps with the low tone continuously during mute.
2. Press and release either the volume up key or the volume down key to resume the call. The headset
beeps twice with the low tone.
NOTICE : The changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is pennined. Any change to the antenna or the device
could result in the device excwding the RF exposure requirements and void
user’s authority to operate the device.
FCC ID. : 030CCM03
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:11:26 14:46:36-08:00
Modify Date                     : 2003:11:26 14:46:36-08:00
Page Count                      : 2
Creation Date                   : 2003:11:26 22:46:36Z
Mod Date                        : 2003:11:26 22:46:36Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : MKuo
Metadata Date                   : 2003:11:26 22:46:36Z
Creator                         : MKuo
Title                           : Exhibit-E-User's Manual.pdf

EXIF Metadata provided by EXIF.tools