Topcon RF-01 2.4GHz BAND DATA COMMUNICATION MODULE User Manual XE972
Topcon Corporation 2.4GHz BAND DATA COMMUNICATION MODULE XE972
Topcon >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 875448 |
| Application ID | VOo3TTsMmN5IOvXKDArtVQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 10.92kB (136483 bits) |
| Date Submitted | 2007-12-04 00:00:00 |
| Date Available | 2007-12-04 00:00:00 |
| Creation Date | 2007-11-16 15:33:21 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2007-11-16 15:33:56 |
| Document Title | XE972 User Manual |
| Document Creator | Acrobat PDFMaker 6.0 for Word |
| Document Author: | yukio |
13-Nov-2007 RF-01 User Manual Confidential TOPCON RF-01 User Manual Rev. 0.9 Page 1 of 9 13-Nov-2007 List of Contents 1. 1.1 1.2 1.3 1.4 1.5 1.6 General Overview Features Application Interface connecter pin assignment Outline View Package Dimensions 2. Characteristics 2.1 Electrical Characteristics 2.2 RF Characteristics 3. Notes TOPCON RF-01 User Manual Rev. 0.9 Page 2 of 9 13-Nov-2007 1. General 1.1 Overview This specification covers RF-01 Data Radio Unit, which complies with ARIB STD T-66, FCC Part 15 247 RSS-210 and ETSI EN 300 400. This unit consist of Texas CC2500 radio IC and Renesas CPU R8C19 for Radio Data communication in 2.4GHz band. All detailed specification may be changed notice. without 2.4GHz Antenna CC2500 TEXAS RADIO IC R8C19 RENESAS CPU UART Interface TOPCON RF-01 User Manual Rev. 0.9 Page 3 of 9 13-Nov-2007 1.2 Features • • • • • • • Radio Data rate up to 32kbps. Support Slow Hopping 22channels in 2.401GHz ~ 2.4115GHz Ultra Low Power Consumption RoHS Compliant Support USART connection speed up to 115.2kbps Small Package Size (38.7 x 19.0 x 5.9) Integrated 26MHz Crystal Unit 1.3 Application • • • • Radio Data Modem Wireless Controller Wireless Data Logger Wireless Security Sensor 1.4 Interface connecter pin assignment TOP Side View of RF-01 19 20 (Power In) 1.2. VB 3.4. GND (Power GND) 5.6. CS (Carrier Sense) 7.8. PWR CONT (Unit Power Control) 9.10. PTT (Transmit Switch) 11.12. GD MONI(Not Used) 13.14. RXD(UART RXD) 15.16. TXD(UART TXD) 17. RTS(UART RTS) 18. MODE(Not Used) 19. CTS(Not Used) 20. RESET (Unit Reset) TOPCON RF-01 User Manual Rev. 0.9 Page 4 of 9 13-Nov-2007 1.5 Outline View Pattern Antenna Interface connector 1.6 Package Dimensions 38.7 5.9 19.0 Left Side View Top View Right Side View Side View Weight 6g TOPCON RF-01 User Manual Rev. 0.9 Page 5 of 9 13-Nov-2007 4. Characteristics 4.1 Electrical Characteristics Absolute Maximum Rating Rating Minimum Typical Maximum Unit Supply Voltage 3.2 3.5 6.5 Operating Temperature Range -20 25 55 RX Current consumption 36 mA TX Current consumption 40 mA 4.2 RF Characteristics Transmitter Specification Output Transmit Power Frequency Range 20dB Bandwidth Modulation Characteristics Carrier Frequency Drift Receiver Specification Sensitivity Maximum Input Level Adjacent Channel rejection Condition Normal Normal GHz Normal MHz Normal MHz -20 ~ +50 Condition BER 0.1% Normal Normal Min. Typ. 2.401 Max. -1dBm 2.4115 0.1 0.05 2.5ppm Min. Typ. Max. -90dBm -20dBm 18dB 3. Notes TOPCON RF-01 User Manual Rev. 0.9 Page 6 of 9 13-Nov-2007 FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT CAUTION: This device and its antenna(s) must not be colocated or operating in conjunction with any other antenna or transmitter. End user cannot modify this transmitter device. Any unauthorized modification made on the device could avoid the user's authority to operate this device. CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20cm must be maintained between the antenna of this device and all persons. The following sentence has to be displayed on the outside of the device in which the transmitter module is installed: “Contains FCC ID:H5PRF-01 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not TOPCON RF-01 User Manual Rev. 0.9 Page 7 of 9 13-Nov-2007 occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. TOPCON RF-01 User Manual Rev. 0.9 Page 8 of 9 13-Nov-2007 IC Statements: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with RSS 210 of Industry Canada “IC”. “Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” "The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb" L’ utililisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. "The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb" “To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.” The following sentence has to be displayed on the outside of the device in which the transmitter module is installed: “Contains IC:6050A-RF01 TOPCON RF-01 User Manual Rev. 0.9 Page 9 of 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 9 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:fb41d951-592a-4419-af3f-b741e3d557ef Producer : Acrobat Distiller 6.0 (Windows) Company : Source Modified : D:20071116063302 Headline : Create Date : 2007:11:16 15:33:21+09:00 Creator Tool : Acrobat PDFMaker 6.0 for Word Modify Date : 2007:11:16 15:33:56+09:00 Metadata Date : 2007:11:16 15:33:56+09:00 Document ID : uuid:c04bc3eb-d407-47fa-90c4-9679e0959bbe Version ID : 105 Format : application/pdf Title : XE972 User Manual Creator : yukio Subject : Tagged PDF : Yes Author : yukioEXIF Metadata provided by EXIF.tools