Topcon RLSV Rotating Laser User Manual RL SV

Topcon Corporation Rotating Laser RL SV

Contents

manual regularity part

Download: Topcon RLSV Rotating Laser User Manual RL SV
Mirror Download [FCC.gov]Topcon RLSV Rotating Laser User Manual RL SV
Document ID1491921
Application IDjWdT7yiD6llU2Q11WpojpQ==
Document Descriptionmanual regularity part
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.41kB (92601 bits)
Date Submitted2011-06-29 00:00:00
Date Available2011-06-30 00:00:00
Creation Date2011-06-22 18:00:39
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2011-06-22 18:00:39
Document TitleMicrosoft Word - RL-SV User Manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: 91117

10-JUNE-2011
RL-SV2S User Manual
RF Part
Confidential
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 1 of 8
10-JUNE-2011
List of Contents
1. General
1.1
1.2
1.3
1.4
1.5
1.6
Overview
Features
Application
Interface connecter pin assignment
Outline View
Package Dimensions
2. Characteristics
2.1 Electrical Characteristics
2.2 RF Characteristics
3. Notes
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 2 of 8
10-JUNE-2011
1 General
1.1 Overview
This specification covers RL-SV2S Data Radio Unit, which complies with
ARIB STD T-66, FCC Part 15 247 RSS-210 and ETSI EN 300 400.
This unit consist of Texas CC2500 radio IC and for
Radio Data communication in 2.4GHz band.
All detailed specification may be changed without notice.
2.4GHz
Antenna
CC2500
TEXAS
RADIO IC
UART
Interface
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 3 of 8
10-JUNE-2011
1.2 Features
•
•
•
•
•
•
•
Radio Data rate up to 32kbps.
Support Slow Hopping 22channels in 2.401GHz ~ 2.479.75GHz
Ultra Low Power Consumption
RoHS Compliant
Support USART connection speed up to 115.2kbps
Small Package Size (38.7 x 19.0 x 5.9)
Integrated 26MHz Crystal Unit
1.3 Application
•
•
•
•
Radio Data Modem
Wireless Controller
Wireless Data Logger
Wireless Security Sensor
1.4 Outline View
Radio Part
Pattern Antenna
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 4 of 8
10-JUNE-2011
1.5 Package Dimensions
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 5 of 8
10-JUNE-2011
2. Characteristics
2.1 Electrical Characteristics
Absolute Maximum Rating
Rating
Minimum
Typical
Maximum
Unit
6.5
-20
25
50
RX Current consumption
36
mA
TX Current consumption
40
mA
Min.
Typ.
Max.
-1dBm
2.47975
0.1
0.05
2.5ppm
Typ.
Max.
-90dBm
-20dBm
Supply Voltage
Operating Temperature
Range
2.2 RF Characteristics
Transmitter
Specification
Output Transmit Power
Frequency Range
20dB Bandwidth
Modulation Characteristics
Carrier Frequency Drift
Condition
Normal
Normal GHz
Normal MHz
Normal MHz
-20 ~ +50 C
Receiver
Specification
Sensitivity
Maximum Input Level
Adjacent Channel rejection
Condition
BER 0.1%
Normal
Normal
2.401
Min.
18dB
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 6 of 8
10-JUNE-2011
3. Notes
FCC Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT
CAUTION: This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter. End user
cannot modify this transmitter device. Any unauthorized
modification made on the device could avoid the user's authority
to operate this device.
CAUTION: To comply with FCC RF exposure compliance requirements, a
separation distance of at least 20cm must be maintained between
the antenna of this device and all persons.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 7 of 8
10-JUNE-2011
IC Statements:
The term “IC:” before the radio certification number only signifies that Industry
Canada technical specifications were met.
This device complies with RSS 210 of Industry Canada “IC”.
“Operation is subject to the following two conditions: (1) this device may not
cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.”
"The installer of this radio equipment must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb"
L’ utililisation de ce dispositif est autorisée seulement aux conditions
suivantes :
(1)
il ne doit pas produire de brouillage et
(2)
l’ utilisateur du dispositif doit étre prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de compromettre
le fonctionnement du dispositif.
"The installer of this radio equipment must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb"
“To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.”
TOPCON CORPORATION
RL-SV2S User Manual Rev. 1
Page 8 of 8

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ab4e597d-cdd1-42f4-8974-d882e07a9584
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2011:06:22 18:00:39+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:06:22 18:00:39+09:00
Document ID                     : uuid:9f69b444-0c4f-46e0-9e5b-531e5d66e71f
Format                          : application/pdf
Title                           : Microsoft Word - RL-SV User Manual.doc
Creator                         : 91117
Author                          : 91117
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H5P-RLSV

Navigation menu