Topscan WBUSBDONGLE01 USB Dongle User Manual user manual

user_manual

USB Dongle User Manual

INTRODUCTION:

The USB Dongle is a Bluetooth 4.0 receiver that acts as an accessory for the scanning pen. It can

be used on terminal devices such as desktop computers, notebooks, and all-in-ones to receive

scan data of the scanning pen and display scan information on the display of the terminal

devices.

SPECIFICATIONS:

1.Model Name:WBDG-01

2.Product Size:18.5mm*14.5mm*5.9mm

3.Rated Power Input: 100mW(5V)

OPERATION:

1. Open the software, insert the scanning pen, and the software interface will display the name

of the scanning pen.

2. Remove the scanning pen from the terminal device.

3. Insert the USB Dongle into the terminal device, the terminal device will automatically complete

the driver installation.

4. USB Dongle will automatically connects to the scanning pen, later the host computer will

prompt “ connection completed”.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.