Toro SCG Light Logic Plus LPlus /SMRT Logic SMRT-T SMRT-I User Manual SCG TORO v1 1

Download:
Mirror Download [FCC.gov]
Document ID	2854960
Application ID	HsqxcdycrrLZMTbPv5sNag==
Document Description	Toro User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.13kB (576602 bits)
Date Submitted	2015-12-23 00:00:00
Date Available	2015-12-23 00:00:00
Creation Date	2015-12-18 14:52:36
Producing Software	Acrobat Distiller 9.4.5 (Windows)
Document Lastmod	2015-12-18 14:52:36
Document Title	SCG_TORO_User Manual- v1.1.pdf
Document Creator	Adobe Illustrator CS2
Document Author:	rungeth

Toro SMRT Logic User Manual
Register
SMRT account must be set up.
1. Point browser to www.SMRTlogic.com .
2. Click the Register link.
3.
Register.
Model: SMRT-T
Add a Location
Now we need to add the location of the
SMRT.
1. Click + Add a Location.
2.
example, “Home” and “Primary residence”
respectively.
3. On the Google Maps map (Figure 1), enter
location of the red arrow to the desired location.
Figure 1
4.
the e-mail. You will be taken to the Light Logic
website. Click the Complete Registration link.
5. You will be taken to the sign in page.
Enter e-mail address and password
then click Sign In.
4. Scroll down. Enter a PIN for the SMRT Logic
to enable manual operation. PIN must
match the PIN of the Remote (EVO-HH) if a remote
is owned.
5. Enter a value (ranging from -120 minutes to 120
Figure
Figure 2
6. Click Submit.
Add a Second Location
It is possible to add another location: a vacation
house for example. Repeat steps 1-7 above with a new
Name.
Edit a Location
1. Click the blue gear icon
to the right of the
location name.
2. A contextual menu appears. Select Edit Location.
3. Follow steps 2-7 as above.
3
Add Scene/s
After adding a location, a default Scene is
turns on every day of the week from Dusk to 10pm.
To edit the Scene:
Add Hardware
Connecting the SMRT
1. Connect Ethernet cable from internet router to
RJ45 port on back of SMRT.
1. Click the blue pen by “Scene 1” text.
Position Antenna and
Unit as Shown.
2.
Plug in the AC adapter.
2. Change the Scene name, description, which days
of the week the scene will execute, and the times of
Use Supplied
Antenna Only
Figure 3
3.
settle on solid green.
As you can see in Figure 3, it is possible to have
For example, one might want security lights to
stay on longer on Friday and Saturday nights.
3. Click Submit.
Add a Scene
It is possible to add additional scenes to the SMRT
Logic (see cover diagram).
1. Click the + Add a Scene button.
2. Enter a name, description, specify the days of the
week to run and the time for those days.
Add a Schedule B if desired.
3. Click Create Scene.
Delete a Scene
1. Press the blue pen next to the Scene name.
2. Click the red Delete scene link (Figure 3).
Now we have to add the SMRT Logic to your
Light Logic account.
1. At the computer, click
the blue gear icon
by the location to add
the SMRT. From the
contextual menu,
select
Devices.
2.
3.
4.
Manual Scene Operation
desired time (in minutes) then press On.
“SUID” number on the sticker on the bottom of
the unit.
Enter the Security key also found on bottom.
Click Submit.
The SMRT
should be
added to the
system.
Add LPCUs to the SMRT
We need to add LPCUs at this time. LPCUs must be
added one at a time.
1. Press the Activate discovery mode button.
Edit SMRT Logic Equipment
Mouse-click the blue pencil icon to
edit LPCU description or change scene
assignment.
Delete SMRT Logic Equipment
Mouse-click the blue trashcan icon to
delete a LPCU.
2. You will be prompted to press the button on the
LPCU to add. Go to the LPCU and press the
button.
3.
Give the detected LPCU a description and assign
it to the desired scene.
4. Press the Submit button when done.
5. Repeat steps 1-4 for each LPCU to add.
Update the Firmware
1. Go to Accounts and select desired account.
2.
hand side
of the SMRT
Logic
window will
show if any of the SMRT Logic equipment
3. If an update is
available, press
the Manage
Firmware link.
4. You will see a
list of devices
that can be
upgraded. Press
the Upgrade
SMRT
displays the progress of the update.
Support
1.
2.
Click the Contact button at the bottom of the
page.
On the right side of the page, click the Submit a
ticket link.
3.
4.
click the Create Ticket button.
It is also possible to check ticket status here by
clicking Check Ticket Status at the top of the
page.
Troubleshooting
Problem
Cause
Solution
LED remains orange
SMRT Logic unable to get an IP
address from the network’s DHCP server.
assign IP addresses. If needed, an SMRT
static IP address. Refer to Advanced
SMRT network setup on the website.
LED blinks green
SMRT unable to reach the internet.
connection using the same Ethernet wire
if possible.
FCC Statement and Caution - FCC ID: OF7SCG
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
In order to maintain compliance with the FCC RF exposure guidelines, this device should be installed and o perated with a
minimum distance of 20cm between the radiator, and the body of the operator and/or nearby persons.
Any change or modification not approved by the party responsible for compliance could void the user’s authority to operate
this device.
Permitted Low Gain Dipole Whip Antenna (2dBi).
IC Statement - IC: 3575A-SCG
1. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait
partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne
énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne.
Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l'exploitation de l'émetteur.
Antenna Approved/Antenne approuvé
Type/Type
Max. Gain/Max. Gain
Dipole Whip
2.0 dBi
Impedance/Impédance
50 Ω
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
In order to maintain compliance with the IC RF exposure guidelines, this device should be installed and operated with a minimum
distance of 20 cm between the radiator, and the body of the operator and/or nearby persons.
Afin de maintenir la conformité avec les directives d'exposition RF IC, ce dispositif doit être installé et exploité avec une distance minimale de
20 cm entre le radiateur et le corps de l'opérateur ou à proximité de personnes.
2015 The Toro Company®
Form Number 373-0865 Rev. 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : rungeth
Create Date                     : 2015:12:18 14:52:36-05:00
Modify Date                     : 2015:12:18 14:52:36-05:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:12:18 14:44:55-05:00
Creator Tool                    : Adobe Illustrator CS2
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14944 bytes, use -b option to extract)
Instance ID                     : uuid:900d9063-5226-4b16-9e4d-a8569cbe9ed2
Original Document ID            : xmp.did:e5fe545f-ad6f-824c-8198-70d51dc5a770
Document ID                     : xmp.id:25e78da3-5849-d041-a32b-1352c12d31db
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:13bbf52d-8ccb-544e-bb17-35d9aa511120
Derived From Document ID        : xmp.did:8feeb753-7963-6a4c-a10f-4cb7d76661f1
Derived From Original Document ID: xmp.did:e5fe545f-ad6f-824c-8198-70d51dc5a770
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2015:12:04 10:36:56-08:00
Format                          : application/pdf
Creator                         : rungeth
Title                           : SCG_TORO_User Manual- v1.1.pdf
Producer                        : Acrobat Distiller 9.4.5 (Windows)
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools