Toro Drip Bubblers Sell Sheet

: Toro Toro-Drip-Bubblers-Sell-Sheet-139275 toro-drip-bubblers-sell-sheet-139275 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

Drip Bubblers

(Pressure Compensating)

Features & Benefits

Easy to Install

Easily threads on to a ½” threaded riser. The self-sealing screen eliminates

the cost and labor of having to use plumber’s tape on every riser.

Easy to Maintain

Self-cleaning mechanism flushes at every startup, ensuring reliable operation

and fewer maintenance headaches.

Durable Construction

Commercial-grade plastic and chloramine-stabilized silicone diaphragm

provide dependable UV- and chemical-resistant performance in the least

forgiving of environments.

Pressure Compensating

Pressure compensating to 2 and 4 GPH over a range of 5-50 PSI.

Toro’s new pressure-compensating ½” threaded Drip Bubblers

are built to perform in tough environments. Bringing commercial-

grade ruggedness to drip irrigation, they’re easy to install, virtually

maintenance-free, and are a more robust alternative to traditional

drip emitters connected to ¼” tubing. The innovative design of

these Drip Bubblers combines the low flow rates of drip emitters

with the ease of ½” PVC riser installation. A self-sealing screen

eliminates the need for plumber’s tape and the chloramine-

stabilized silicone diaphragms assure long-term reliability with

potable or reclaimed water. Toro continues to set the standard

for performance and durability in the world of drip irrigation.

Landscape Drip

www.toro.com • The Toro Company • Irrigation Division

5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676

Specifications subject to change without notice. For more information, contact your local Toro distributor. ©2012 The Toro Company. All rights reserved.

P/N 12-1109-IRC

Drip Bubblers (Pressure Compensating)

Specifying Information — Drip Bubblers

Model Number Description

LF20-PC

LF40-PC

LF20-PCE

LF40-PCE

2.0 GPH PC Bubbler

4.0 GPH PC Bubbler

2.0 GPH PC Bubbler, Effluent

4.0 GPH PC Bubbler, Effluent

Specifications

Operating Range

• Flow Rates: 2.0 GPH & 4.0 GPH

• Pressure Compensation: 5 – 50 PSI

• Minimum Filtration Requirement: 80 Mesh

Operating Specifications

• ½” FIPT inlet; diffuser cap outlet

• Self-sealing screen eliminates need for plumber’s tape

• Self-cleaning flush at startup minimizes clogging and

maintenance

• Flow rate molded into the identification

• Commercial-grade plastic and chloramine-stabilized silicone

diaphragm provide dependable UV- and chemical-resistant

performance

• Effluent and non-effluent models

Warranty

• Two years

Non-effluent Model

Effluent Model