Toro Groundsmaster 4000 D 30448 Specifications

: Toro Toro-Groundsmaster-4000-D-30448-Specifications-138792 toro-groundsmaster-4000-d-30448-specifications-138792 toro pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Groundsmaster® 4000-D & 4010-D
The most powerful rotary mower in its class, this 11' performer delivers unsurpassed productivity and quality of cut.

Groundsmaster® 4000-D
Model 30609

Groundsmaster® 4010-D
Models 30636

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

18

Groundsmaster® 4000-D/4010-D Specifications*
GROUNDSMASTER 4000-D, TIER 4 DIESEL, MODEL 30609
GROUNDSMASTER 4010-D, TIER 4 DIESEL MODEL 30636, Model 30607
ENGINE
AIR CLEANER
RADIATOR
FUEL CAPACITY
TRACTION DRIVE
HYDRAULICS/COOLING
DIAGNOSTICS
GROUND SPEED
TIRES
MAIN FRAME
BRAKES
SEAT
STEERING
INTSTRUMENTATION
CONTROLS

Yanmar® 4-cylinder, liquid-cooled, turbo-charged diesel. 127 cu. in. (2.1 liter) displacement. Engine rated at 55 hp (41 kW) net and 125 ft.-lbs. (169 Nm) torque at
2,000 rpm. 8 quart (7.6 liter) oil capacity. EPA Tier IV Final Compliant
Dry, replaceable primary and safety elements.
Rear-mount, cross-flow, 7-row, 6.3 fins per inch, 9 quart (8.5 liter) capacity.
21 gallons (79.5 liters) diesel fuel. Biodiesel-Ready for use up to B-20(20% biodiesel and 80% petroleum blend)
Parallel hydrostatic, closed loop system with full-time 4WD. Forward/reverse in low (mow) and high (transport) range with full-time, automatic traction assist (forward
only) standard on Groundsmaster 4000-D models. Variable displacement piston pump with electronic servo control powers dual speed displacement piston motor drive
into double reduction planetary in front, and mechanical axle in rear. SmartPowerTM feature controls traction speed to maintain optimal cutting blade speed.
8.75 gallon (33.1 liter) capacity with 10 micron remote spin-on filter. 9 row, single pass cooler, 6.3 fins per inch, that tilts out for cleaning. Variable speed radiator
cooling fan with automatic (based on coolant and oil temps) and manual reversing capabilities.
Diagnostic pressure test ports: forward and reverse traction, left, center and right decks, reverse 4WD, lift, steering, charge and deck counterbalance circuits.
Transport: 0-16.2 mph (0-26.1 km/h) forward, 0-8.1 mph (0-13 km/h) reverse. Mow: 0-8.3 mph (0-13.4 km/h) forward, 0-4 mph (0-6.4 km/h) reverse.
Front: 26 x 12-12, 6-ply tubeless Multi-Trac. Rear: 20 x 10-10, 6-ply tubeless Multi-Trac.
All welded formed-steel frame with integral tie-down anchors.
Mechanically actuated, internal wet disc brakes on input to each planetary drive. Individual foot-operated steering brake control of left and right wheel. Lock pedals
together and latch to engage parking brake.
4-way adjustable, right armrest travels with seat and suspension.
Power steering with dedicated power source. Steering wheel tilts to desired operator position. Uncut circle: 0" diameter.
InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, intake
temperature, low oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage
Tilt steering, ignition switch, throttle switch, foot-operated traction pedal, lockable individual brake pedals, parking brake lock, mow/transport speed selector switch,
3-two position switches for individual deck lift/lower, counterbalance adjustment, tow valves, cup holder, toolbox, radio holder, fan switch and 12-volt power outlet.

ELECTRICAL

12-volt, 690 cold cranking amps battery, 80 amp alternator (4010-D). Overload protection with automotive type fuses.

INTERLOCKS

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat while moving or deck is engaged, traction and /
or deck stops, info center alarms and gives message. Mowing only permitted in low range. Traction not allowed if parking brake engaged and pedal moved out of
neutral, info center alarms and gives message.  Deck transport latches.

GROUND CLEARANCE
OVERALL DIMENSIONS
WEIGHT
SAFETY CAB (4010)
SAFETY
WARRANTY
ACCESSORIES

6.5" (16.5 cm)
	
	
	

Height	
85" (216 cm) w/ROPS up	
93.9” (237 cm) w/ cab 	

Length	
135" (343 cm)	
w/decks down	

4205 lbs. (1907 kg) w/ full fluids (GM4000).

Width	
136" (346 cm)	
w/decks down	

Transport Width	
71" (180 cm)	
@ 2" (5 cm) HOC	

Wheelbase
55.5" (140 cm)

4759 lbs. (2159 kg) w/ full fluids (GM4010).

MODEL 30636: ROPS certified cab with heat, AC and the following standard features: climate system pressurized cab, heavy-duty pantograph front windshield wiper
and washer, front windshield has 38” of visibility, interior mirror, fold away exterior side mirrors, molded front fenders, right and left doors and rear window have
tinted (50%) glass, front and rear windows open, quick release window latches act as emergency exit, rubber sound isolator cab mounts and upholstered interior
panels and headliner, textured neoprene floor mat, interior dome light.
MODEL 30607: Factory installed, ROPS certified, climate controls (AC & heating), opening rear window, front wiper/washer, interior mirror, exterior side mirrors.
Complies with American National Standards Institute (ANSI B71.4-2012) and applicable ISO EN 5395 (CE) (machine directive 89/392, 91/368, 93/44, 84/538, 89/336)
requirements; Optional lights. Meets ANSI/ASAE 5279.12 (Lighting and Marking of Agricultural Equipment on Highways). Foldable ROPS, ISO 21299 certified.
Two-year limited warranty. Refer to operator’s manual for further details.
Work light, Road lights consisting of dual taillights, dual headlights, slow moving vehicle sign, turn signal, flasher and lights; Sunshade Beacon

CUTTING DECKS
WIDTH OF CUT
MOWING RATE
CONSTRUCTION
DECK DRIVE
HEIGHT-OF-CUT
SPINDLES
BLADES
CASTER WHEELS
GROUND FOLLOWING
WING PROTECTION
RECYCLER® KIT
MULCHING KIT
SKIDS

Overall: 132" (335 cm), Front: 62" (157.5 cm), Wings: 42" (106.7 cm), Overlap: 7" (12.8 cm).
Mows up to 11.0 acres/h (4.5 hectares/h) at 8.5 mph (13.4 km/h) (assumes no overlap or stops).
Welded .100" (25 mm) steel with 7 and 10-gauge steel channel and plate reinforcements, bullnose bumpers.
Direct mounted hydraulic motor into spindle. Remaining spindle(s) driven by individual B section kevlar belt. Quick release belt covers.
1"-5" (25-127 mm) in .5" (13 mm) increments.
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm) diameter conical ductile iron housing, and 2 greaseable tapered roller bearings.
21.75" (55.2 cm) long, 2.5" (6.4 cm) wide, .25" (.64 cm) thick.
8 x 3.50-4, 4-ply, smooth, pneumatic, sealed precision ball bearings.
6" anti-scalp cups on each blade, adjustable skids on each deck, 4 anti-scalp rollers on front deck and 1 on each wing.
Bi-directional, impact absorption device on each wing deck.
Model 30420 will convert decks into Guardian® Recycler® decks.
Model 30422.
Reversible polymetric.

*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products
offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

19

The Groundsmaster 4000-D & 4010-D are manufactured
in Tomah, WI ISO 9002 Certified Plant.

Groundsmaster® 4000-D Attachment Specifications*

ROTARY BROOM, MB MODEL HCT**
TYPE
BROOM SIZE
BRUSH
WEIGHT
OPTIONS

Windrow type, front mounted hydraulic broom with dual
motors. Electric/hydraulic angling, 30° left and right.
32" (81 cm) diameter x 60" (153 cm) wide.

SNOWTHROWER ERSKINE MODEL 2000***

Sectional brush with combination polypropylene/wire radial
segments.

STAGE
WIDTH OF CUT
CUTTING HEIGHT
CUTTING EDGE
SKID SHOES
AUGER DIAMETER
FAN DIAMETER
CHUTE ROTATION
SHEAR PROTECTION
CASTING DISTANCE
APPROXIMATE SHIPPING
WEIGHT
HOSES

460 lbs. (209 kg)
Dirt Deflector, Storage Stands.

2
61" (155 cm)
29" (74 cm)
3/8" x 3" (9.5 mm x 7.6 cm) bolt-on
Adjustable
16" (41 cm) open flight
20" (51 cm) 4-blade
Hydraulic 270°
Pressure relief
Up to 30' (9.14 m)
850 lbs. (386 kg)
Included

SUNSHADE
UNIVERSAL MOUNT SUNSHADE
UNIVERSAL MOUNT SUNSHADE

White, Model 30349
Red, Model 30552

*Specifications and design subject to change without notice.
** Manufactured by M-B Companies Inc.
*** Manufactured by Erskine Attachments.
Note: The Toro Company does not manufacture or sell the snowthrower or rotary broom, nor does Toro guarantee these
accessories in any manner whatsoever.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

20

The Groundsmaster 4000-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:03:10 09:17:59-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:03:10 09:18:09-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:10 09:18:09-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:d12eadaf-ced2-474a-9896-dfd3f1821a96
Instance ID                     : uuid:2e45d528-fe84-4741-9adf-7965040b3c77
Producer                        : Adobe PDF Library 11.0
Page Count                      : 3

EXIF Metadata provided by EXIF.tools