Toro Groundsmaster 4300 D 30859 Specifications

: Toro Toro-Groundsmaster-4300-D-30859-Specifications-138751 toro-groundsmaster-4300-d-30859-specifications-138751 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Groundsmaster® 4300-D
The Groundsmaster 4300-D provides superior hill climbing ability, a lightweight footprint and ample power with its
44 hp turbo diesel engine. Its five Contour Plus cutting units closely follow contours for an even cut on undulating
terrain and heavy-duty rear rollers provide a beautiful striping pattern for spectacular results.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

24

Groundsmaster® 4300-D Specifications*
GROUNDSMASTER 4300-D, TIER 4 DIESEL, MODEL 30864 (A)
ENGINE

Yanmar® 3-cylinder, 88.5 ft.-lbs. of torque, liquid-cooled, turbo-charged diesel, 43.4 hp (32.4 kW) 91.4 cu. in. (1.5 liter) displacement. 5.5 quart (4.7 liter) oil capacity.
EPA Tier IV Final Compliant.
Dry, replaceable primary and optional safety element.

AIR CLEANER
RADIATOR Rear-mount, cross flow, 7-row, 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.
FUEL CAPACITY 13.5 gallons (51.1 liters) diesel fuel. Biodiesel-ready for use up to B20 (20% biodiesel 80% diesel blend).

Front drive wheels powered by a hydrostatic pump with individual wheel motors. Parallel - Series Hydrostatic, closed loop 4 wheel drive, forward direction only.

TRACTION DRIVE Variable displacement piston pump with direct displacement control, Standard all-wheel drive with CrossTrax® All-Wheel Drive system, which transfers power from the
front wheels to the opposite rear wheels via independent rear wheel motors.
14 gallon (53 liter) capacity with two remote spin-on filters; main system, and traction charge, Oil cooler is a double row single pass (11 fin/in) that tilts out for cleaning.

HYDRAULICS/COOLING
DIAGNOSTICS Diagnostics pressure test ports: forward and reverse traction, deck circuit 1 & 2, change 4WD, and lift.
0-10 mph (0-16.7 km/h) forward, 0-3.5 mph (0-5.6 km/h) reverse.
GROUND SPEED Transport:
Mow: 0-7 mph (0-11.3 km/h) forward, 0-3.5 mph (0-5.6 km/h) reverse.

TIRES Front: 26.5 x 14-12, 6-ply turf tread. Rear: 20 x 12-10, 6-ply turf tread.
MAIN FRAME All welded formed-steel frame with integral tie-down anchors.
drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake.
BRAKES 8”mechanical
Dynamic braking through hydrostatic traction drive system.
SEAT Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt, Air-Ride seat suspension optional.
STEERING Rear wheel, power steering with an independent hydraulic pump circuit.
Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, low oil pressure,
INSTRUMENTATION InfoCenter™:
alternator, engine hours, engine rpm, voltage, counterbalance settings, glow indicator, lift/lower indicator.
switch, foot-operated traction pedal, engine speed control, mow/transport selector switch, service brake with parking brake latch, joystick control for raising
CONTROLS Ignition
and lowering cutting units, mow/transport lever.

ELECTRICAL 12-volt battery with 540 cold cranking amps, 55 amp alternator. Overload protection with automotive-type fuses.
engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, decks stop. If operator leaves the
INTERLOCKS Prevents
seat with the unit out of neutral, engine stops. Mowing only permitted in low range. Engine stops if parking brake engaged and traction pedal not in neutral.
OPERATOR AREA Beverage holder, radio holder / mobile phone holder, 12-volt power outlet, open compartment for tools, jackets, golf balls, etc. under control arm.
WORK LIGHTS Standard.
ROLL-OVER PROTECTION 2-post standard.
Overall length w/decks down: 126” (320 cm) 	
Overall width: 96.3” (245 cm) (outside of decks)	

DIMENSIONS Overall transport width: 88.3” (224 cm) (outside of front tires)
W/ CUTTING UNITS Height w/2-post ROPS: 86” (215 cm)
& WEIGHT Wheelbase: 60” (152.4 cm)
SAFETY
WARRANTY
ACCESSORIES

Traction Unit Weight: 3,205 lbs (1454 kg) - with full fluids and 5 cutting units.
Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.

Track Width, front/rear: 88.3” (224 cm)/54” (137 cm)
Ground clearance: 5” (12.7 cm)
Complies with American National Standards Institute (ANSI B71.4-2004) and applicable ISO EN 5395 (CE) standards (machine directive 89/392, 91/368, 93/44, 84/538,
89/336) requirements.
Two-year limited.
Air ride seat suspension (03667), leaf mulching kit (108-7409-01), combination blade (108-7395-03), angle sail blade (117-0209-03) atomic mulching blade (1140435), parallel sail blade (114-0434-03), white sunshade (30349), red sunshade (30552), rear roller scraper kit,(117-0149), operator fan kit (110-8804), 22” rotary
replacement cutting unit (30845), diagnostic display box (85-4750).

CUTTING UNITS
TYPE
WIDTH OF CUT
HEIGHT OF CUT
DECK DRIVE
CONSTRUCTION
SPINDLE ASSEMBLY
GROUND FOLLOWING
BLADES

Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units w/rear rollers.
90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm).
.75”-4” (1.9-10.2 cm) in .25” (.6 cm) increments.
Hydraulic, direct coupled to spindle
Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (.48 cm) high-strength steel and 10-gauge
exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x .25” (.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (.48 cm) high-strength
steel and 10-gauge exterior channels.
Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25” (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between
spindle shaft and pulley. Welded blade retainer plus anti-scalp cups.
6” (15.3 cm) anti-scalp cups on each blade. On each deck: two 5” (12.7 cm) diameter front rollers with sealed stainless steel bearings, one 3” (7.6 cm) diameter rear
roller with greaseable stainless steel bearings.
22” (55.9 cm) long, 2.5” (6.4 cm) wide, .25” (.64 cm) thick. Standard: combo blade (108-7395-03)

*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes
only. Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details
on all warranties.
**Dependent on operator and turf conditions.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

25

The Groundsmaster 4300-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:03:10 09:18:58-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:03:10 09:19:11-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:10 09:19:11-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:4969f584-b68a-6147-b98b-f568ce3698ae
Instance ID                     : uuid:dd97e8e2-8787-d848-a724-92fe05866867
Producer                        : Adobe PDF Library 11.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools