Toro Reelmaster 5410 D 03672 Specifications

: Toro Toro-Reelmaster-5410-D-03672-Specifications-138674 toro-reelmaster-5410-d-03672-specifications-138674 toro pdf

Open the PDF directly: View PDF .
Page Count: 3

68

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Reelmaster® 5410 / 5410-G / 5410-D

A lightweight fairway mower that’s agile and easy on the turf, yet has the power and cutting capacity to get even the

tough jobs done.

69

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

REELMASTER 5410

DIESEL, MODEL 03675

REELMASTER 5410-G

GAS, MODEL 03608

REELMASTER 5410-D

TIER 4 DIESEL, MODEL 03606

ENGINE

Kubota® 4-cylinder, liquid cooled, diesel engine.

35.5 hp (26.5 kW) @ 3000 rpm.

Kubota® 4-cylinder, liquid cooled, gas engine.

49 hp (36.5 kW), 88.5 ft. lbs. (120 Nm) torque.

Yanmar® 3-cylinder, liquid cooled, diesel engine.

36.8 hp (27.5 kW), 74.4 ft. lbs. (105 Nm) torque,

1.64 liter displacement.

LUBRICATION

Pressurized lubrication system with 5.0 quart (4.7 liter) capacity.

FUEL FILTER

Replaceable spin-on fuel filter/water separator.

AIR CLEANER

Heavy-duty three-stage, radial seal air cleaner with restriction indicator.

COOLING

Rear mounted radiator with industrial tube and

fin construction, 6.5 fins per inch, 7.0 quart (6.6

liter) capacity.

Plate and bar radiator/oil cooler combination, 6.3 fins per inch, 10 quart (9.5 liter) capacity.

FUEL TANK CAPACITY

13.5 gallon (51.1 liter) capacity. Biodiesel-Ready for use

up to B-20 (20% biodiesel and 80% petroleum blend). 14 gallon (53 liter) capacity.

HYDRAULIC OIL CAPACITY

9.0 gallon (34.1 liter) capacity. 15 gallon (56.8 liter) capacity.

TRACTION DRIVE

Front drive wheels powered by a hydrostatic pump with individual wheel motors. All-wheel drive optional with CrossTrax® All-Wheel Drive system, which transfers

power from the front wheels to the opposite rear wheels via independent rear wheel motors

GROUND SPEED

0-10 mph (0-16 km/hr) forward transport; 0-8 mph (0-12.8 km/hr) mow; 0-4 mph (0-6.4 km/h) reverse.

TIRES

Front traction tires: 26.5 x 14-12 turf tires Rear steer tires: 20 x 12-10

MAIN FRAME

High strength steel frame with welded construction.

BRAKES

Individual left and right drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking

brake. Dynamic braking through hydrostatic traction drive system.

STEERING

Rear wheel, power steering with an independent hydraulic pump and circuit.

GAUGES

InfoCenterTM onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, indicates fuel level, coolant temp., low oil pressure,

alternator, engine hours, engine rpm, voltage, reel speed, backlap speed, glow indicator (diesel), lift/lower indicator.

CONTROLS

Single foot-operated traction pedal, foot actuated mow speed limiter, foot

actuated service and parking brake. Hand-operated key ignition switch,

throttle, cutting unit raise/lower joystick, cutting unit engage switch, and

headlight switch all positioned on right hand pivoting control console.

Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking

brake. Hand-operated key ignition switch, throttle, isochronous engine speed control, cutting unit raise/

lower joystick, cutting unit engage switch, and headlight switch all positioned on right hand pivoting

control console.

ELECTRICAL & INTERLOCKS

Heavy-duty 12-volt battery, 570 CCA, 40 amp alternator. Electronic control unit is a microprocessor based,

solid state control unit with diagnostic capabilities. Traction pedal, parking brake, operator presence in seat,

and cutting unit engage/disengage safety interlock switches.

Heavy-duty 12-volt battery, 570 CCA, 55 amp alternator.

Electronic control unit is a microprocessor based, solid state

control unit with diagnostic capabilities. Traction pedal, parking

brake, operator presence in seat, and cutting unit engage/

disengage safety interlock switches.

REEL DRIVE

Reel drive circuit is split independently for front and rear cutting units. Hydraulic functions controlled by an integrated hydraulic control block. Reel speeds are

electronically adjustable in nine incremental settings. Standard on-board backlapping.

CUTTING UNIT LIFT/LOWER

Front and rear cutting unit lift/lower is sequenced for uniform starting and ending points.

SEAT

Deluxe high back suspension seat with fore, aft, height and weight adjustment.

ROPS

Standard with seat belt

HEIGHT

63" (160 cm) seat top, 85" (217.2 cm) top of ROPS.

LENGTH (2WD)

111" (281.9 cm)

WHEEL BASE

60" (152.4 cm)

OPERATIONAL WIDTH

113.5" (288.3 cm)

TRANSPORT WIDTH

92" (233.7 cm)

WEIGHT

2,505 lbs. (1,136 kg) (2WD), 2,615 lbs. (1,186 kg) (4WD) 2,750 lbs. (1,247 kg) (2WD), 2,860 lbs. (1,297 kg) (4WD) 2,943 lbs. (1,335 kg) (2WD), 3,053 lbs. (1,385 kg) (4WD)

CERTIFICATION Complies with ANSI B71.4-2004 and CE requirements. Certain machine configurations require rear weight kits for standards compliance, see Operator’s Manual for details.

WARRANTY

Two-year limited warranty. Refer to the Operator’s Manual for further details.

Reelmaster® 5410 / 5410-G / 5410-D Specifications*

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties. The Reelmaster 5410 is manufactured

in Tomah, WI ISO 9002 Certified Plant.

70

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

The Reelmaster 5510 & 5610 are manufactured

in Tomah, WI ISO 9002 Certified Plant.

8-BLADE CUTTING UNIT, MODEL 03694 11-BLADE CUTTING UNIT, MODEL 03695

TYPE

5-plex, hydraulically driven, balanced cutting units with adjustable rear weight transfer spring. Cutting units feature quick disconnect for removal/installation and are

interchangeable to all positions. Cutting units also feature rear throw capability.

SIZE

22" (56 cm) wide, 5" (12.7 cm) diameter, 8 & 11" blade cutting units.

WIDTH OF CUT

100" (254 cm)

HOC RANGE

0.25" - 1.0" (6.4-25.4 mm) standard. Up to 1.5" (38.1 mm) with high height of cut kit.

REEL SPEED

Manually controlled, variable reel speed for control of clip frequency. Reel speeds are incrementally adjustable between 200-2,000 rpm with a backlap speed of 200

rpm.

BEDKNIFE ADJUSTMENT

Dual Precision Adjustment (DPA), bedknife to reel.

ROLLERS

3" (7.6 cm) diameter, deep groove plastic Wiehle front roller. 2.5" (6.4 cm) diameter shortened steel rear roller. Other roller configurations optional.

POWERED REAR ROLLER BRUSH, MODEL 03668

TYPE

Rotating, helically woven, stiff bristled brush. Spring loaded belt drive.

CONTACT POINTS

Tightly woven 11-point contact.

SPIN RATE

Rapid 2000 rpm spin rate.

FAIRWAY GROOMER, MODELS 03665, 03666 & OPTIONAL BROOMER,® PART 110-4085

TYPE

Rotating blades with optional Broomer™ brush strips that are woven within the blade helix for full width turf contact.

GROOMING WIDTH

20.5" (52.1 cm)

GROOMING RANGE

0-0.25" (0-6.4 mm) below height of cut when engaged, 0.5" (0-12.7 mm) above Groomer height of cut when disengaged.

BLADES

2.5" (6.4 cm) diameter, 0.042" (1 mm) thick heat treated spring steel blades with 0.5" (12.7 mm) spacing.

Reelmaster® 5410 / 5410-G / 5410-D Accessories*

SCRAPER OPTIONS

107-3280 Rear Roller Scraper

107-2993-03 Wiehle Roller Scraper

110-1735 Comb Scraper Kit

TRACTION UNIT ACCESSORIES

03655 CrossTrax® All-Wheel Drive

03667 Air-ride Seat Suspension

30349 Universal Mount Sunshade – White

30552 Universal Mount Sunshade – Red

03662 Grass Basket Kit

BEDKNIFE OPTIONS

110-4084 Low Cut Bedknife

125-2771 EdgeMaxTM Low Cut Bedknife

108-9095 EdgeMaxTM Bedknife (Production)

119-4280 EdgeMaxTM Extended Low HOC Bedknife

120-1640 Extended Low HOC Bedknife

110-4074 Heavy Duty Bedknife

108-9096 Standard Bedknife

REEL OPTIONS

108-9070 5" Blade Reel only

03664 Verticutter Reel

110-9600 High Height of Cut Kit

GROOMER OPTIONS

110-4085 Broomer (for use with groomer blades)

03718 Fairway Perfection Brush (optional

replacement for groomer blades)