Toro Reelmaster 6500 D Specifications

: Toro Toro-Reelmaster-6500-D-Specifications-138649 toro-reelmaster-6500-d-specifications-138649 toro pdf

Open the PDF directly: View PDF .
Page Count: 3

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14 77

Reelmaster® 6500-D & 6700-D

These first true mid size fairway mowers offer power, durability, a consistently superb quality of cut

and up to 10 acres per hour productivity.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14 78

HYDRAULIC SYSTEM

PUMP A three section gear pump provides hydraulic flow to power the cutting units, power steering and cutting unit lift.

CONTROL BLOCKS All hydraulic functions are controlled by two integrated hydraulic control blocks utilizing cartridge type relief valves, solenoid controlled proportional valves and

solenoid operated directional control valves.

REEL SPEED CONTROL

Reel drive circuit is split into front and rear independent circuits. Each circuit has a manually adjustable control for reel speed and backlap adjustment.

LIFT CYLINDERS All lift and lower sequences are controlled by the ECU.

HYDRAULIC OIL RESERVOIR

100% of oil from reservoir passes through a 100 mesh suction strainer before entering the reel drive circuit. 8.5 gallon (32 liter) capacity.

HYDRAULIC OIL

FILTER

11 gram capacity at 10 gallon (37 liter) per minute flow Average Beta = 20 at 3 micron. Filter head has integral 50 psi (3.4 bars) bypass and a true differential

pressure service indicator.

Reelmaster® 6500-D & 6700-D Specifications*

REELMASTER 6500-D

MODEL 03806, 2WD OR MODEL 03807, 4WD

REELMASTER 6700-D

MODEL 03808, 4WD

ENGINE Kubota® V1505-T liquid-cooled diesel engine. 4-cylinder, over-head valve. 1.5 liter displacement. Turbo-charged. 44.2 hp (33 kW) gross rated, 42 hp (31.3 kW) net

at 3000 rpm. 40 amp alternator. Donaldson two-stage air cleaner with safety filter and restriction indicator.

RADIATOR Rear mounted, cross-flow 6.3 fins per inch. Cooling system capacity is 10 quarts (9.5 liters). Air to oil cooler with 2 rows, 6 fins per inch, mounted in front of

radiator tips outward for cleaning. Removable oil cooler/radiator screen.

ELECTRICAL

FEATURES

12-volt, 650 cold cranking amperes at 0°F (-18°C), 105 minute reserve capacity at 80°F (27°C), maintenance free battery. 1.4 kW electric starter. 40 amp

alternator with I.C. regulator/rectifier. Automotive type electrical system. Seat switch, reel and traction interlock switches.

FUEL SYSTEM Bosch® in-line fuel injection pump with energized-to-run (ETR) fuel flow solenoid. Replaceable spin-on fuel filter/water separator.

Fuel capacity: 15 gallons (57 liters). 2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).

CONTROLS Foot operated traction and brake pedals. Hand operated throttle, traction speed limiter, parking brake latch, ignition switch, single joystick control for cutting unit

on/off and lift/lower. Reel speed and backup controls located under the hood.

GAUGES Hour meter, speedometer, fuel gauge, engine coolant gauge, and warning light cluster: engine oil pressure, high engine temperature, charge indicator, glow plug.

Reel control lamp that lights to indicate glow time, controller fault, and high mow speed warning.

DIAGNOSTICS

The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability. Optional diagnostic display

connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA LOG™ system allows mechanic to find intermittent

problems. Diagnostic test ports are provided for front and rear cutting unit drive, cutting unit lift, steering, and hydrostatic transmission charge pressure.

TRACTION DRIVE

Power to the front drive wheel is via servo-controlled hydrostatic pump operating individual fixed displacement axial piston wheel motors that operate a planetary

gear final drive assembly. Foot pedal control of forward/reverse ground speed.Toro 4-Matic® 4WD System only: couples rear drive axle to hydrostatic transmission

via overrunning clutch for full time on-demand 4WD. A Roll Over Protection Structure (ROPS) and seat belt are standard on 4WD models.

GROUND SPEED 0-10 mph (0-16.1 km/hr) forward; 0-4 mph (0-6.4 km/hr) reverse.

TIRES/WHEELS/

PRESSURE

Two rear steering tires: 20 x 10-10, tubeless, 6-ply rating. Two front traction drive tires: 29 x 14-15, tubeless, 6-ply rating. Recommended tire pressure: 10-15 psi

(59-103 kPa).

MAIN FRAME All welded steel frame includes tie-down loops.

BRAKES Wet triple disc brakes on front planetary assemblies may be actuated individually for service brakes or locked together for transport or parking brakes. Dynamic

braking through hydrostatic traction drive.

STEERING Power steering with dedicated power source.

SEAT Deluxe seat with adjustable suspension and fore-aft location. Optional Armrest Kit, Model 30707.

ROPS A 2-post ROPS with seat belt and optional canopy; standard on Models 03807 and 03808, optional on Model 03806.

OVERALL

DIMENSIONS

Height Length Transport Width Operational Width Wheel Tread Wheelbase

Models 03806/03807: 60" (152 cm) w/o ROPS 120" (305 cm) 84" (213 cm) 110" (279 cm) 72.25" (178 cm) - front 58" (147 cm)

84" (213 cm) w/ ROPS 41" (104 cm) - rear

Model 03808: 84" (213 cm) w/ ROPS 120" (305 cm) 84" (213 cm) 147" (374 cm) 72.25 (178 cm) - front 58" (147 cm)

41" (104 cm) - rear

NET WEIGHT WET

Model 03806: 3,100 lbs. (1,407 kg) with 5-blade cutting units and full fluid levels.

Model 03807: 3,200 lbs. (1,453 kg) with 5-blade cutting units and full fluid levels.

Model 03808: 3,850 lbs. (1,748 kg) with 5-blade cutting units and full fluid levels.

SOUND LEVEL 82 dB(A) under normal operating conditions.

WARRANTY Two-year limited warranty. Refer to the Operator’s Manual for further details.

CERTIFICATION The Reelmaster 6000 series complies with American National Standards Institute (ANSI B71.4-2004) and European Community (CE) specifications with required

weight kits and ballast installed.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

The Reelmaster 6500-D & 6700-D are manufactured

in Tomah, WI ISO 9002 Certified Plant.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14 79

Reelmaster® 6500-D & 6700-D Specifications* (continued)

DPA Cutting Units – Retrofit 2001 and newer traction units

8 AND 11-BLADE DPA CUTTING UNITS, MODELS 03698 AND 03699

Reelmaster 6500-D Reelmaster 6700-D

TYPE

Five hydraulically driven, balanced cutting units with adjustable rear weight

transfer spring. Cutting units feature quick disconnect for removal/installation

and are interchangeable to all positions. Cutting units also feature rear throw

capability.

Seven hydraulically driven, balanced cutting units with adjustable rear weight

transfer spring. Cutting units feature quick disconnect for removal/installation

and are interchangeable to all positions. Cutting units also feature rear throw

capability.

WIDTH OF CUT 96" (244 cm). 133" (338 cm)

SIZE 22" (56 cm) wide, 7" (17.8 cm) diameter, 8 and 11 blade cutting units.

HOC RANGE 0.25" - 1.0" (6.4-25.4 mm) standard. Up to 2.0" (50.8 mm) with high height of cut kit.

REEL SPEED Manually controlled, variable reel speed for control of clip frequency.

BEDKNIFE ADJUSTMENT Dual Precision Adjustment (DPA), bedknife to reel.

ROLLERS 3" (7.6 cm) diameter, deep groove Wiehle front roller. 3.0" (7.6 cm) diameter rear roller. Other roller configurations optional.

FAIRWAY GROOMER, MODELS 03685, 03686 & OPTIONAL BROOMER,™ PART 110-4085

TYPE Rotating blades with optional Broomer™ brush strips that are woven within the blade helix for full width turf contact.

GROOMING WIDTH 20.5" (52.1 cm)

GROOMING RANGE 0-0.25" (0-6.4 mm) below height of cut when engaged, 0-0.25" (0-6.4 mm) above height of cut when disengaged.

BLADES 2.5" (6.4 cm) diameter, 0.042" (1 mm) thick heat treated spring steel blades with 0.5" (12.7 mm) spacing.

POWERED REAR ROLLER BRUSH, MODEL 03688

TYPE Rotating, helically woven, stiff bristled brush.

CONTACT POINTS Tightly woven 11 point contact.

SPIN RATE Rapid 2000 rpm spin rate.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

The Reelmaster 6500-D & 6700-D are manufactured

in Tomah, WI ISO 9002 Certified Plant.

TRACTION UNIT ACCESSORIES

03671 CrossTrax® All-Wheel Drive

03667 Air-ride Seat Suspension

30349 Universal Mount Sunshade

03662 Grass Basket Kit

SCRAPER OPTIONS

107-3280 Rear Roller Scraper

107-2993-03 Wiehle Roller Scraper

110-1735 Comb Scraper Kit

BEDKNIFE OPTIONS

110-4084 Low Cut Bedknife

125-2771 EdgeMaxTM Low Cut Bedknife

108-9095 EdgeMaxTM Bedknife (Production)

119-4280 EdgeMaxTM Extended Low HOC

Bedknife

120-1640 Extended Low HOC Bedknife

110-4074 Heavy Duty Bedknife

108-9096 Standard Bedknife

REEL OPTIONS

108-9072 7" - 5 Blade Reel only

03684 Verticutter Reel

110-9600 High Height of Cut Kit