Toshiba Client Solutions MSDB01 Bluetooth SDIO Card User Manual Draft

Toshiba Corporation Bluetooth SDIO Card Users Manual Draft

Users Manual Draft

Download: Toshiba Client Solutions MSDB01 Bluetooth SDIO Card User Manual Draft
Mirror Download [FCC.gov]Toshiba Client Solutions MSDB01 Bluetooth SDIO Card User Manual Draft
Document ID259225
Application IDnrC3Yg2q5F/bAMqrboTw2A==
Document DescriptionUsers Manual Draft
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.91kB (111428 bits)
Date Submitted2002-07-26 00:00:00
Date Available2002-07-26 00:00:00
Creation Date2002-07-08 16:18:49
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2002-07-08 16:18:50
Document TitleUsers Manual Draft

Confidential
SDIO Card TypeType-B for Bluetooth™
Bluetooth™
User's Manual
1.0 Draft (June 24, 2002)
TOSHIBA CORPORATION
SDIO Card TypeType-B for Bluetooth™
Bluetooth™ User's Manual 1.0 Draft (June 24, 2002)
Confidential
Revision History
Revision
1.0 Draft
Date
2002-06-24
Comments
Draft
(*) The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
Feature
Bluetooth™ SD card is an ultra small and thin card which has built-in antenna, Bluetooth™ function
and SD/IO interface compliant with SDIO Card Specification.
Bluetooth™ is a low-cost and low-power wireless communication standard for short range
communication which uses 2.4GHz ISM band and GFSK modulation method. Bluetooth™ specification
is standardized by Bluetooth SIG and it is industry-widely supported.
SDIO Card Specification is a standard for small size IO devices. SDIO Card Specification is
standardized by SD Association and it is also industry-widely supported.
Bluetooth™ SD card can be used with any kind of devices which have SDIO card slot and software for
Bluetooth SD card, i.e. PDAs, portable PCs and desktop PCs.
Appearance
Direction of insertion
Installation
When inserting this card into SD card slot, check the form of the connector and insert it surely.
•
Connect the Bluetooth™ SD Card to a PDA.
This drawing is an example.
As for the position where the
Bluetooth™ SD card is
connected, refer to the User’s
Manual of PDA.
PDA supporting the SD/IO Card
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
What you can do with the Bluetooth™ SD Card
< Data communication between a PDA and a PC >
PDA supporting the
SD/IO Card
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
PC with Bluetooth
1.0 Draft
(June 24, 2002)
Confidential
Specifications
Model name
Model No.
Bluetooth™ specification
SDIO Card Type-B for BluetoothTM
SD-BT2
Bluetooth™ Ver.1.1 *1
Specification of electric
Operating voltage : 3.1 to 3.6V
Power Consumption :
100mA(MAX.)
50mA(AVG. in transmitting/receiving)
In conformity with Bluetooth radio specification
Transmission electric power class : Power class 3
[ maximum output : 1mW (0dBm)]
Sensitivity of receiving : –70dBm
SDIO Card Specification V1.0
SDIO Card Type-B Specification for Bluetooth™
40mm-long x 24mm-wide x 2.1mm-thick
A part of protrusion is 2.8mm-thick.
RF,
Baseband,
LMP,
L2CAP*2,
SDP*2,
RFCOMM*2,
*2
SPP(Serial Port Profile)
RF specification
Host-Card Interface
Dimension
Bluetooth™
Protocols/Profiles
implemented in the Card
GAP*2,
*1 : Bluetooth Special Interest Group, Document number 1.C.47/1.1, February 22nd, 2001
*2 : It is supported when the card is in “SDIO Card for Bluetooth Type-B” mode.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
Using this products
•
Using this products
***WARNING
Do not perform disassembly, modifications or repairs.
There is a danger of fires, electrical shock, damage to the unit, and injury.
Do no remove the label and do not paste the other labels.
Dismantling this product will invalidate the warranty and any other service plan.
Do not use this unit in an area where people wearing pacemakers may be nearby (such as in a
crowded train).
Electrical signals may cause abnormalities in pacemaker operation.
Those with a pacemaker should operate this system from a minimum distance of 22cm or more.
Electrical signals may cause abnormalities in pacemaker operation.
Do not use this unit near medical electronic equipment. Likewise, do not attach medical
electronic equipment to this system.
Electrical signals may cause abnormalities in the operation of medical electronic equipment.
Do not use this unit near automatic doors, fire detection devices, or other automatic control
devices.
Electrical signals may affect these devices, leading to accidents caused by malfunctions.
Do not use this unit in an aircraft or in a place where this unit may electromagnetically affect
other devices.
An electromagnetically wave may affect these devices and cause accidents by malfunctions.
If this unit give any electromagnetic interference to other device during use of this unit, turn off
the system that this unit is mounted. If the system is not turned off, eject this unit from the
system.
Electrical signals may affect these devices, leading to accidents caused by malfunctions.
Do not put this unit into your mouth to avoid swallowing it.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
*** CAUTION
Do not use
Do not use unit in the bath, or any other area where there is a chance of in bath
submersion or high humidity.
There is a risk of electrical shock.
Warning
Do not insert staples or paper clips into the unit.
There is a danger of an electrical short, smoke, or fire.
Warning
Do not use unit in a location exposed to rain or mist.
Rain or mist on the unit may cause fires or electrical shock.
Warning
If the unit is connected to a personal digital assistant, do not touch the SD card
during or immediately following operation.
There is a danger of burns resulting from high heat levels. Those with delicate
skin should use caution.
Warning
Do not place cups, flower vases or other containers holding liquid near unit.
There is a danger of electrical shock if liquids enter the unit.
If liquids should enter the unit, turn the power off immediately, remove the
plug from the electrical outlet, and bring the unit to the place of purchase or a
nearby service center for inspection.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
Notes on Operation
Regarding the operating and storage environment for this unit
Warning
Do not place the unit in direct sunlight, a closed car, near a heating device, or
any other location where high temperature is a possibility.
This may cause damage to the unit, malfunction, or internal memory loss.
Warning
Do not place the unit in a place susceptible to extremely low temperatures.
This may cause damage to the unit, malfunction, or internal memory loss.
Warning
Do not subject unit to rapid temperature changes.
Dew formation may cause damage to the unit, malfunction, or internal memory
loss.
Warning
Do not place unit in an extremely dusty location.
This may cause damage to the unit, malfunction, or internal memory loss.
Warning
Do not use the unit in the following locations.
Near a microwave oven, or areas with a risk of electrical shock or static
electricity.
Depending on the environment, electricity may not reach unit.
Warning
Do not place the unit in a place with risk of strong vibration.
This may cause damage to the unit, malfunction, or internal memory loss.
Warning
When cleaning the unit, do not use benzene or paint thinner.
This may cause damage or discoloration to the case.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
Restrictions for Use
•
Restrictions for Use
This product was not designed to be used with systems directly responsible for
sustaining human life (*1). Avoid using this product with such systems.
*1: Systems directly responsible for sustaining human life include the following:
(Life support systems, systems for use in surgery, related medical equipment)
When this product is to be used in installations responsible for human safety or
the maintenance of public installations (*2), special transport, maintenance,
operation, and wiring (*3) becomes necessary. Please contact our service center.
*2: Installations responsible for human safety and public installations include the following.
(Main control systems for nuclear power plants, safety installations in nuclear power plants,
other systems responsible for maintaining public safety)
(Mass transport systems, vehicle operation systems, or aerial control systems)
*3: Special wiring refers to safety systems (fool proofing, failsafe system installation, redundant installation)
installed in close consultation with a representative from our company.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
Confidential
・FCC information
FCC notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution
CAUTION:Change or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
MPE(Maximum Permissible Exposure)
“RF Exposure Compliance------In order for this device to comply with FCC rules, under the provision of Part 15.247(b)(c),
it must operate in a manner that ensures that the public is not exposed to radio frequency
energy levels in excess of the Maximum Permissible Limits (MPE).
It is recommended that the antenna of this device be placed at 20 cm or more from its user
and any nearby persons, during continuous and extend data transmission. The users of
this device should ensure that the operation of this device is in compliance with these
provisions.”
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
10
Confidential
・IC (Industry Canada)
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing.
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
“Operation of this device is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.”
"The installer of this radio equipment must ensure that the antenna is located or pointed such that
it does not emit RF field in excess of Health Canada limits for the general population; consult
Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb"
< Notice >
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
End user can not modify this transmitter device.
Any unauthorized modification made on the device could avoid the user's authority to operate this device.
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
11
Confidential
・Taiwan
Article 14
Unless approved, for any model accredited low power radio frequency electric machinery, any
company, trader or user shall not change the frequency, increase the power or change the
features and functions of the original design.
Article 17
Any use of low power radio frequency electric machinery shall not affect the aviation safety and
interfere with legal communications. In event that any interference is found, the use of such
electric machinery shall be stopped immediately, and reusing of such products can be resumed
until no interference occurs after improvement.
The legal communications mentioned in the above item refer to radio communications operated
in accordance with telecommunication laws and regulations.
Low power radio frequency electric machinery shall resist against interference from legal
communications or from industrial, scientific and medical radio emission electric machinery.
・EU R&
&TTE directive
European Union (EU) and EFTA
This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark
accordingly.
Note that the radio frequency band used this equipment has not been harmonized in all the EU.
< Support Regions/Countries >
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, The Netherlands, United Kingdom
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
1.0 Draft
(June 24, 2002)
12
Confidential
Ohme, June 18 , 2002
Place, Date
SDIO Card TypeType-B for Bluetooth
Bluetooth™
oth™ User's Manual
Sign
1.0 Draft
(June 24, 2002)
13

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:07:08 16:18:49
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:07:08 16:18:50+09:00
Page Count                      : 13
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CJ6MSDB01

Navigation menu