Toshiba Information Systems CC4-E01 Mobile Phone with UMTS/GSM/DCS/PCS & Bluetooth User Manual 1 of 3

Toshiba Information Systems (UK) Ltd, Mobile Communications Division Mobile Phone with UMTS/GSM/DCS/PCS & Bluetooth Users Manual 1 of 3

Contents

Users Manual 1 of 3

CMY KPANTONE 485PANTONE 877 TS921_UG_UK_blk Customised forToshiba TS 921User guideToshiba TS 921   User guidePX1C0007K1AA
 1IntroductionCongratulations on choosing the TS 921, which is customised for Vodafone live!We hope that you will be pleased with this new wireless phone incorporating 3G technology, also known as UMTS. This phone provides advanced entertainment features including video telephony, video messaging and high-speed access to Vodafone live! The TS 921 has a sophisticated design, high-quality 260,000 colour display and 1.92 mega pixel camera. Furthermore, you can rotate the colour display to suit your needs.Copyright©2005 TOSHIBA CORPORATION, All rights reserved.Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language dependent characters and services.This wireless device is a 3GPP GSM Release 99 terminal supporting GPRS service, and is designed to support also Release 97 GPRS networks. However, there may be some compatibility issues when used in some Release 97 GPRS networks. For more information, contact your service provider.
2 TOSHIBA CORPORATIONIMPORTANT NOTE: PLEASE READ BEFORE USING YOUR MOBILE PHONEBY ATTEMPTING TO USE ANY SOFTWARE ON THE SUPPLIED PHONE THIS CONSTITUTES YOUR ACCEPTANCE OF THESE EULA TERMS. IF YOU REJECT OR DO NOT AGREE WITH ALL THE TERMS OF THIS EULA, PLEASE DO NOT ATTEMPT TO ACCESS OR USE THE SUPPLIED SOFTWARE.End User License AgreementThis End User License Agreement (“EULA”) is a legal agreement between you (as the user) and TOSHIBA CORPORATION (“Toshiba”) with regard to the copyrighted software as installed in a Toshiba 3G mobile phone supplied to you (the “Phone”). Use or disposal of any software installed in the Phone and related documentations (the “Software”) will constitute your acceptance of these terms, unless separate terms are provided by the Software supplier on the Phone, in which case certain additional or different terms may apply. If you do not agree with the terms of this EULA, do not use or dispose the Software. 1. License Grant. Toshiba grants to you a personal, non-transferable and non-exclusive right to use the Software as set out in this EULA. Modifying, adapting, translating, renting, copying, making available, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the Software is strictly prohibited, except as expressly permitted in this EULA. Furthermore, you hereby agree not to create derivative works based on the Software. 2. Copyright. The Software is licensed, not sold. You acknowledge that no title to the intellectual property in the Software is or will be transferred to you. You further acknowledge that title and full ownership rights to the Software will remain the exclusive property of Toshiba, Toshiba’s affiliates, and/or their suppliers, and you will not acquire any rights to the Software, except as expressly set out in this EULA. You may keep a back-up copy of the Software only so far as necessary for its lawful use. All copies of the Software must contain the same proprietary notices as contained in or on the Software and are subject to the terms of this EULA. All rights not expressly granted under this EULA are reserved to Toshiba, Toshiba’s affiliates and/or their suppliers.3. Reverse Engineering. You agree that you will not attempt, and if you are a business organisation, you will use your best efforts to prevent your employees, servants and contractors from attempting to reverse engineer, decompile, modify, translate or disassemble the Software in whole or in part except to the extent that such actions cannot be excluded by mandatory applicable law and only if those actions are taken in accordance with such applicable law. Any failure to comply with the above or any other terms and conditions contained herein will result in the automatic termination of this license and the reversion of the rights granted hereunder to Toshiba.4. LIMITED WARRANTY. Only during the warranty period for the Phone, Toshiba, Toshiba’s affiliate, its suppliers or its authorized service company will repair or replace, at Toshiba’s sole discretion, defective Software unless such defect results from acts or phenomenon beyond the reasonable control of
 3Toshiba. EXCEPT AS PROVIDED IN THIS EULA: (A) TOSHIBA, TOSHIBA’S AFFILIATES, AND THEIR SUPPLIERS DISCLAIM ALL WARRANTIES, CONDITIONS OR OTHER TERMS (WHETHER EXPRESS OR IMPLIED), INCLUDING BUT NOT LIMITED TO WARRANTIES, CONDITIONS AND TERMS OF SATISFACTORY QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS; AND (B) THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. YOU ACCEPT THAT SOFTWARE MAY NOT MEET YOUR REQUIREMENTS AND NO WARRANTY CAN BE GIVEN THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. 5. LIMITATION OF LIABILITY. TO THE FULLEST EXTENT LEGALLY PERMITTED, IN NO EVENT SHALL TOSHIBA, TOSHIBA’S AFFILIATES OR THEIR SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES FOR (A) LOST BUSINESS OR REVENUE, BUSINESS INTERRUPTION, LOSS OF BUSINESS DATA; OR (B) CONSEQUENTIAL, SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND (WHETHER UNDER CONTRACT, TORT OR OTHERWISE) ARISING OUT OF: (I) THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TOSHIBA, TOSHIBA’S AFFILIATES OR THEIR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (II) ANY CLAIM BY A THIRD PARTY. SAVE AS SET OUT IN THIS SECTION, TOSHIBA’S ENTIRE LIABILITY UNDER THIS EULA SHALL NOT EXCEED THE PRICE PAID FOR THE SOFTWARE, IF ANY. THE ABOVE DISCLAIMER AND LIMITATION DOES NOT EXCLUDE OR LIMIT (A) LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE OR (B) ANY MANDATORY LEGAL RIGHT OR LIABILITY TO THE EXTENT THAT IT CANNOT BE LAWFULLY EXCLUDED OR LIMITED UNDER APPLICABLE LAW.PLEASE MAKE AND RETAIN A COPY OF ALL DATA YOU HAVE INSERTED INTO YOUR PRODUCT, FOR EXAMPLE NAMES, ADDRESSES, PHONE NUMBERS, PICTURES, RINGTONES ETC, BEFORE SUBMITTING YOUR PRODUCT FOR A WARRANTY SERVICE, AS SUCH DATA MAY BE DELETED OR ERASED AS PART OF THE REPAIR OR SERVICE PROCESS.6. Laws. This EULA will be governed by the laws of England and Wales. All disputes arising out of this EULA shall be subject to the exclusive jurisdiction of the English Court.7. Export Laws. Any use, duplication or disposal of the Software involves products and/or technical data that may be controlled under the export laws of applicable countries or region and may be subject to the approval of the applicable governmental authorities prior to export. Any export, directly or indirectly, in contravention of the export laws of applicable countries or region is prohibited.8. Third Party Beneficiary. You agree that certain suppliers of the Software to Toshiba have a right as a third party beneficiary to enforce the terms of this EULA against you as a user.9. Transfers. The Software may be transferred only as installed on the Phone to a lawful third party user, where that party accepts the terms of this EULA which will continue to apply.
4 10. IF YOU ARE DEALING AS A CONSUMER IN THE UK & THE SOFTWARE QUALIFIES AS ‘GOODS’ YOUR STATUTORY RIGHTS UNDER APPLICABLE LAW ARE NOT AFFECTED.
 5Licensed by QUALCOMM Incorporated under one or more the following United States Patents and/or their counterparts in other nations :4,901,307 5,504,773 5,109,390 5,535,2395,267,262 5,600,754 5,416,797 5,778,3385,490,165 5,101,501 5,511,073 5,267,2615,568,483 5,414,796 5,659,569 5,056,1095,506,865 5,228,054 5,544,196 5,337,3385,657,420 5,710,784Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.SD Logo   is a trademark.MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson multimedia.T9 Text Input is covered by Euro.Pat. Nos. 0 842 463 (96927260.8), 1 010 057 (98903671.0), 1 018 069 (98950708.2), DK, DE, FI, FR, IE, IT, NL, PT, ES, SE, GB and other patents pending. Powered by Mascot Capsule® / Micro3D Edition™ Mascot Capsule® is a registered trademark of HI Corporation© 2002-2003 HI Corporation. All Rights Reserved.THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG-LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.SEE HTTP://WWW.MPEGLA.COM.Bluetooth™ is a trademark of Bluetooth SIG, Inc.USA.
6 Copyright © 1998-2003 The OpenSSL Project.  All rights reserved.Copyright © 1995-1998 Eric Young (eay@cryptsoft.com)  All rights reserved.THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AND/OR BY ERIC YOUNG  “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT, ERIC YOUNG OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 7
8 Safety InstructionsCare and MaintenanceIf you maintain your phone in good condition, the quality of your phone usage as well as the phone life span will be greatly enhanced. If you follow the suggestions below, this will also help you to fulfil warranty obligations.• Keep the phone and all the parts and accessories out of the reach of small children.• Keep the phone dry as moisture of any kind can contain minerals that will corrode the electronic circuits.• Do not use or store the phone in dusty or dirty locations as the moving parts of the phone can be damaged.• Do not use or store the phone in hot areas. High temperatures will shorten the life span of the phone, damage the battery or warp/melt the plastic used in the phone’s manufacture.• Do not store the phone in cold areas. When there is a difference in temperature between the room and the phone, condensation can form inside the phone, causing damage to the electronic circuits.• Do not open the phone unless absolutely necessary, for example, to install the battery or SIM card. We recommend that you go to your dealer when problems arise with either of these items and allow their experts to handle the phone instead.• Do not mishandle or abuse the phone. Dropping it, knocking or shaking it can damage the internal circuits.• Do not use harsh chemicals, strong detergents, or cleaning solvents to clean the phone. If you must clean it, then use a soft cloth that has been slightly dampened with a mild soap and water solution.• Do not apply paint or other such substances to the phone. This could clog the phone’s moving parts.• If the phone or any of the accessories are not working as they should, please consult your dealer who can provide you with the expert assistance that you require.• Interference may affect your phone’s performance. This is perfectly normal and once you move away from the source of the interference, the phone should operate as usual.FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
 9Information to UserThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient/relocate the receiving aerial.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
10 ContentsIntroduction.......................................1Safety Instructions .............................8Contents .........................................10What’s in the Box.............................121 Basic Operations ..........................13Parts & Functions ............................14SIM Card.........................................25Emergency Calls..............................27Battery Pack....................................28Memory Card ..................................30Turning On/Off the Power.................31System Mode Setting.......................32Language Setting.............................33Date & Time Settings .......................34Accessing Functions ........................37Making a Call ..................................39Answering a Call..............................40Operations during Calls....................41Call Log ..........................................43Optional Services.............................47Character Input................................58Contacts List ...................................632 Video Telephony............................83About Video Calls.............................84Making a Video Call .........................85Answering a Video Call.....................86Convenient Functions for Video Calls.87Video Call Settings...........................913 Camera/Video Camera .................97Camera...........................................98Pictures.........................................102Videos...........................................116Picture & Video Settings.................1204 Messaging ..................................131Messaging Capabilities ..................132MMS.............................................133SMS..............................................144MMS/SMS Common Operations .....150Email ............................................157Postcard........................................165live! Studio ....................................1695 Vodafone live! .............................171Accessing Vodafone live!................172Bookmarks ....................................175Operations for Web Pages..............177Browser Settings............................180Games & More ..............................181Media Player .................................1876 My Items .....................................195My Items .......................................196Using Files & Folders......................198Displaying Files on a TV..................201Using vObjects...............................203Using the Memory Card..................206Using the SIM Card ........................208
 117 Settings.......................................213Display Settings.............................214Phone Profiles ...............................222Language Setting...........................230Shortcut Menu...............................231Shortcut Keys ................................232External Light Settings ...................234Flight Mode Setting........................236Call Settings..................................237Using the Stereo Handsfree Headset ........................................241Security Settings............................243Network & Internet.........................2548 Convenient Functions.................261SIM Tool Kit ...................................262Calendar .......................................263Alarms ..........................................267Calculator......................................269Converter ......................................270Voice Recorder ..............................271Countdown Timer ..........................273Notepad ........................................274World Clock...................................275Multi Task .....................................276Barcode ........................................278Torch ............................................2819 File Transfer & Synchronisation.283File Transfer ..................................284File Synchronisation .......................30010 Appendix...................................305Troubleshooting ...........................306Specifications & Accessories ........308EU Warranty................................309Index ..........................................310Glossary......................................314Health and Safety Information.......316Menu Structure ...........................320
12 What’s in the BoxYour box contains the following items:Phone AC Adapter SD Memory Card (32MB) CD-ROMBattery Pack Battery Cover User Guide Quick Start GuideStereo Handsfree Headset Video Cable for TV Connection 3G Guide
Basic OperationsThis chapter explains the basic operations and functions of your phone.In This Chapter❍Parts & Functions ❍Accessing Functions❍SIM Card ❍Making a Call❍Emergency Calls ❍Answering a Call❍Battery Pack ❍Operations during Calls❍Memory Card ❍Call Log❍Turning On/Off the Power ❍Optional Services❍System Mode Setting ❍Character Input❍Language Setting ❍Contacts List❍Date & Time Settings
14 Basic OperationsParts & FunctionsPhoneAttaching the Strap
Basic Operations 151: Earpiece2: Main Display: The main display is the screen facing you when your phone is opened. 3: Left Soft Key: Performs the operation indicated for the button on the main display.4: Navigation Key/Centre Key: Moves the cursor up, down, left or right, confirms operations and accesses shortcuts (page 233). The centre key is also used to perform other major operations in screens, acts as the shutter button, etc.5: VT Key: Accesses the video call function.6: Send Key: Makes and answers calls.7: Cable and Phone Charging Connections8: Internal Camera Lens: Used during video calls.9: External Light: Flashes for incoming calls, messages and other information, as well as when you have unchecked information.10: Right Soft Key: Performs the operation indicated for the button on the main display.11: AP Key: Accesses Multi Task.12: Camera/Video Key: Activates the camera/video camera.13: End/Power Key: Turns on/off the power and ends calls/operations and takes you back to standby mode.14: Keypad/ Key/# Key: Allows you to enter phone numbers, characters, etc. To switch Phone Profiles (page 222) between Normal and Silent, press and hold  . To set/cancel the key guard (page 252), press and hold  . To listen to your voicemail (page 48), press and hold  .15: Microphone: Used for voice calls.16: Charging Indicator17: External Display: Indicates incoming calls, received messages, etc. while your phone is closed.18: External Camera Lens: Used for taking pictures and recording videos.19: Mobile Light20: Camera Grip21: Infrared Port22: Antenna (Built-in)23: Camera/Video Indicator24: Second Microphone: Records sound for videos.
16 Basic Operations25: Stereo Speakers26: Side Key ( ,  ): Adjusts the volume, selects options, changes the zoom, etc. The function of the key varies depending on the mode.27: Side Key ( ): Takes you back to the previous operation, etc. You can also assign a shortcut to the key (page 232).28: Side Key ( ): Activates the camera, etc. Acts as the shutter button for the camera.29: AV OUT/Earphone Microphone Jack30: Memory Card Slot31: Handstrap Hole
Basic Operations 17Main DisplayThe following indicators appear on the main display.1: / / / /  (Signal Strength, Out of Range): Indicates the signal strength is at one of five levels. (Flight Mode On): Indicates Flight mode (page 236) is set to On.2: /  (Voice/Video Call): Indicates a voice or video call in progress. (Dial-up Connection): Indicates a dial-up connection.3:  (Streaming Playback): Indicates streaming playback. (Sending/Receiving Data): Indicates data is being sent or received. (Identifying GPRS Network Location Information): Indicates you can establish a connection on the GPRS network. (GPRS Data Connection Established): Indicates you can perform data communication on the GPRS network.4:  (Multi Task): Indicates the maximum number of functions activated in Multi Task. (Limited Service): Indicates you are out of the service area of the service provider with which you have concluded a contract. When this indicator is displayed, only emergency services can be called./ (3G Network Connection/Roaming): Indicates a 3G network connection or roaming./ (GSM Network Connection/Roaming): Indicates a GSM network connection or roaming./ (GPRS Network Connection/Roaming): Indicates a GPRS network connection or roaming.Tip• The screens appearing in this manual are simplified for the purpose of explanation and may differ from the actual screens appearing on your phone. •Screens have been omitted from the explanation of some operations.
18 Basic Operations5:  (Web SSL): Indicates a connection to a Web page with security protection. (External Device Synchronisation): Indicates data is being synchronised with an external device./ (Bluetooth™ Connection Established/Connection Standby): Indicates a connection to an external device via Bluetooth™. (Infrared Communication): Indicates a connection to an external device via infrared.6: /  (Java™ Application): Indicates a running/paused Java™ application (page 184).7: /  (Memory Card Inserted/Write Protected): Indicates the status of the memory card (page 30).8:  (Playing Media File): Indicates a media file is being played./ /  (Silent/Car/Meeting): Indicates the profile set for Phone Profiles (page 222).9: /  (MMS/SMS Priority Level): Indicates the reception of a message with a high priority level. (Rights Object): Indicates the reception of a rights object (page 138)./  (New or Unread MMS/SMS): Indicates a new or unread MMS message (page 138) or SMS message (page 147). (WAP): Indicates a new or unread WAP Push message (page 148).10: / / / /  (Battery Level): Indicates the battery level is at one of five levels. (Charging)
Basic Operations 1911: Clock Display Indicator (Clock Display): Appears when your phone is not in standby mode.12: /  (Key Guard/Phone Lock): Indicates the key guard (page 252) or phone lock (page 249) is set.13:  (Alarm): Indicates the alarm (page 267) is set.14: / /  (Silent/Vibration): Indicates both Silent and Vibration are set or either Silent or Vibration is set (page 225).15:  (Information Prompt): Indicates a missed call, unread message, etc.16:  (Message Received): Indicates a recorded message at the Voicemail Centre (page 47). (Missed Call): Indicates a missed call.17:  (SMS and MMS Inbox Full): Indicates the SMS (page 147) and MMS (page 138) Inbox is full.18: / /  (Call Diverting without Ringing Set for Voice Call/Video Call/ Voice and Video Calls): Indicates call diverting without ringing is set for both voice calls and video calls or either voice calls or video calls.
20 Basic OperationsExternal DisplayThe external display allows you to confirm information when your phone is closed.1: / / / /  (Signal Strength, Out of Range): Indicates the signal strength is at one of five levels. (Flight Mode On): Indicates Flight mode (page 236) is set to On. 2: /  (Java™ Application): Indicates a running/paused JavaTM application (page 184).3: /  (Voice/Video Call): Indicates a voice or video call in progress. (Dial-up Connection): Indicates a dial-up connection.4:  (Sending/Receiving Data): Indicates data is being sent or received. (Identifying GPRS Network Location Information): Indicates you can establish a connection on the GPRS network. (GPRS Data Connection Established): Indicates you can perform data communication on the GPRS network.5:  (Multi Task): Indicates the maximum number of functions activated in Multi Task. (Limited Service): Indicates you are out of the service area of the service provider with which you have concluded a contract. When this indicator is displayed, only emergency services can be called./  (3G Network Connection/Roaming): Indicates a 3G network connection or roaming./  (GSM Network Connection/Roaming): Indicates a GSM network connection or roaming./  (GPRS Network Connection/Roaming): Indicates a GPRS network connection or roaming.6: //// (Battery Level): Indicates the battery level is at one of five levels. (Charging)
Basic Operations 217: /  (Key Guard/Phone Lock): Indicates the key guard (page 252) or phone lock (page 249) is set.8: /  (Memory Card Inserted/Write Protected): Indicates the status of the memory card (page 30).9:  (Message Received): Indicates a recorded message at the Voicemail Centre (page 47). (Missed Call): Indicates a missed call./ /  (Silent/Vibration): Indicates both Silent and Vibration are set or either Silent or Vibration is set (page 225).10: /  (MMS/SMS Priority Level): Indicates the reception of a message with a high priority level. (Rights Object): Indicates the reception of a rights object (page 138)./  (New or Unread MMS/SMS): Indicates a new or unread MMS message (page 138) or SMS message (page 147). (WAP): Indicates a new or unread WAP Push message (page 148).11:  (Playing Media File): Indicates a media file is being played./ /  (Silent/Car/Meeting): Indicates the profile set for Phone Profiles (page 222).12:  (Web SSL): Indicates a connection to a Web page with security protection. (External Device Synchronisation): Indicates data is being synchronised with an external device./  (Bluetooth™ Connection Established/Connection Standby): Indicates a connection to an external device via Bluetooth™. (Infrared Communication): Indicates a connection to an external device via infrared.13: Clock Display Indicator (Clock Display)
22 Basic OperationsInformation PromptThis feature notifies you of missed calls, unread messages or other unconfirmed information. If you have unconfirmed information, the information prompt appears in standby mode.1. While the information prompt is displayed, select the item you want to confirm and press  (Select).The information prompt contains the following items.Missed Calls: Notifies of missed calls (page 43).New SMS: Notifies of new SMS (page 147).New MMS: Notifies of new MMS (page 138).New WAP Push: Notifies of new WAP Push (page 148).New Notifications: Notifies of new messages (page 139).New Reports: Notifies of unread report messages (pages 142, 149).Voicemail: Notifies of new messages at the Voicemail Centre (page 47).Stop Snooze: Notifies of an activated alarm set to repeat (page 267).TipIf you still have unconfirmed information after returning to standby mode, press and hold   to redisplay the information prompt.
Basic Operations 23Using Soft KeysYou can perform an operation displayed at the bottom of the main display by pressing the corresponding   or  .Using the Navigation KeyThe navigation key   allows you to perform various operations such as moving the cursor up, down, left or right. With  , you can display the Main menu, confirm the selected item, perform the selected operation, etc. If you press   in standby mode, you can display the shortcut screen (page 231) and use shortcuts.
24 Basic OperationsOpening & Closing Your PhoneIn addition to open style, you can use your phone in turnover style and self-portrait style. Note• When rotating the display, do not force the display to move in the wrong direction. Doing so may damage your phone.• The procedures described in this manual assume that your phone is in the open style.TipIf you switch to turnover style during a voice or video call, the outgoing sound is muted.Open your phone until the display is at an angle of 90 degrees to the keyboard.  Rotate the display 180 degrees clockwise.Turnover StyleConvenient for taking pictures and recording videos at high resolutions.Open StyleOpen your phone until it reaches the stop position.Self-portrait StyleConvenient for taking pictures of yourself.
Basic Operations 25SIM CardBefore using your phone, be sure to do the following.◆Insert the SIM card in your phone.◆Insert the battery pack in your phone (page 28).About the SIM CardThe SIM card contains customer information such as your phone number. Only insert the SIM card in a SIM card compatible phone. If the SIM card is not inserted, the phone cannot be used.Inserting & Removing the SIM CardBefore inserting or removing the SIM card, remove the battery pack. For details on removing the battery pack, see page 28.1. Open the battery cover and remove the battery pack.2. With the IC surface facing downwards, insert the SIM card in the direction shown on the left while keeping it straight.To remove the SIM card, slide it out as shown on the left.
26 Basic OperationsPersonal Identification Number (PIN) CodeThe SIM card has two security codes: PIN code and PIN2 code. For details on the PIN/PIN2 code, contact your service provider.PIN CodeThis is a four to eight digit security code to prevent another person from using your SIM card without permission.If the PIN code setting is set to On (page 246), your PIN code needs to be entered to use your phone each time the power is turned on. You can change the initial number set at the time of purchase (page 247).PIN2 CodeThis is a four to eight digit security code that needs to be entered for operations such as modifying data saved to the SIM card. You can change the initial number set at the time of purchase (page 247).PUK (Personal Unblocking Key) CodeIf the PIN code or PIN2 code is incorrectly entered three times in a row, the PIN/PIN2 lock is set. To cancel the PIN/PIN2 lock, enter the PUK code or PUK2 code. For details on the PUK/PUK2 code, contact your service provider.
Basic Operations 27Emergency CallsYou can still make calls to emergency services when the SIM card is not inserted. However, there is no guarantee that a connection can be established in all countries and areas because operation of your phone differs depending on the wireless network, wireless signal and your phone’s setting status. Do not rely on just your mobile phone when you need to make important calls such as calls to emergency services.Calls may not be able to be made to emergency services depending on the network services of some service providers. For details on services, contact the service provider.1. While in a service area, confirm that your phone is turned on.2. Dial the phone number for an emergency service.3. Press .Note• Most GSM Networks support the internationally recognized emergency numbers of 112 and 911 (for the USA), consult your service provider in the country you are in for the correct number to dial in an emergency.• Calls cannot be made to emergency services while data communication is being performed within a GSM area. End data communication before making a call.• If the system mode is set to UMTS Only or GSM Only, calls cannot be made to emergency services if the selected network is unavailable. Change the system mode setting (page 256) before making a call.
28 Basic OperationsBattery PackBefore using your phone for the first time, charge the battery.Inserting & Removing the Battery Pack1. Press down on the battery cover at a point just below the second microphone and slide it towards the bottom of your phone.2. Lift off the battery cover.3. Insert the battery pack while making sure the socket on the bottom of the battery pack is aligned with the connector in the battery compartment.To remove the battery pack, insert a fingernail beneath the side or bottom tab and lift out the battery pack.4. Place the battery cover on your phone and slide it until it clicks into place.
Basic Operations 29Charging the Battery Pack1. Turn off the power of your phone.2. Open the external connector cover of your phone and insert the connector of the AC adapter.3. Insert the plug of the AC adapter into an AC outlet. The charging indicator lights up and charging begins.4. After the charging indicator goes out, remove the plug of the AC adapter from the AC outlet. Remove the connector of the AC adapter from your phone while pressing the release buttons on the sides of the connector.
30 Basic OperationsMemory CardAbout the Memory CardA 32 MB memory card is supplied for use with your phone. You can save pictures taken and videos recorded with the camera of your phone and various downloaded data to the memory card. Make sure the power is turned off before inserting or removing the memory card. Otherwise data may be lost.◆This manual refers to an SD memory card as the “memory card.”◆Your phone supports memory cards with a storage capacity of up to 512 MB. There is no guarantee that all memory cards will work with your phone because an operation check has not been performed for all memory cards.Inserting & Removing the Memory Card1. Open the memory card slot cover.2. Gently push the memory card into the slot until it clicks into position.To remove the memory card, gently press the memory card. When you let go, the memory card will be ejected.3. Close the memory card slot cover.Note• Do not use excessive force to open the memory card slot cover. Doing so may damage the cover.• Take care that the memory card does not fly out of your phone during removal.
Basic Operations 31Turning On/Off the PowerTurning On the Power1. Press and hold  .The standby screen appears on the main display.If the PIN code setting (page 246) is set to On, enter your PIN code after you press and hold  .Turning Off the Power1. In standby mode, press and hold  .The Power Off screen appears and the power is turned off.Note• A screen for setting the date and time appears the first time you turn on the power of your phone. Set the date and time while referring to “Date & Time Settings” (page 34).• Touching the built-in antenna part of your phone affects signal strength. Avoid touching this part of your phone during use.
32 Basic OperationsSystem Mode SettingYour phone is UMTS (3G)/GSM dual mode compatible. Before using your phone, you can set which system mode your phone uses. For details on setting the system mode, see “Setting the System Mode” (page 256).
Basic Operations 33Language SettingYou can change the language displayed on your phone. For details on setting the language, see page 230.
34 Basic OperationsDate & Time SettingsSetting the Date & TimeYou can set the date and time displayed in standby mode.1. In standby mode, press  , select Settings and press   (Select).2. Select Phone Settings and press   (Select).3. Select Date&Time and press   (Select).4. Select Set Date/Time and press   (Select).5. Enter the year (two digits), month, day and time and press   (OK).Tip• You can enter a date from 2/1/2000 to 30/12/2099. Enter the time in accordance with the 24-hour system.• You can switch the clock display between the 12-hour and 24-hour system (page 217).
Basic Operations 35World Clock SettingIn addition to the date and time displayed in standby mode, you can set the world clock. For details on displaying the world clock, see page 275.Setting the Home City/Alternate City1. In standby mode, press  , select Settings and press   (Select).2. Select Phone Settings and press   (Select).3. Select Date&Time and press   (Select).4. Select World Clock and press   (Select).5. Select Set Home City or Set Alternate City and press   (Select).6. Use   to select the city you want to set and press  .A green circle indicates your home city on the map. A red circle indicates the alternate city.
36 Basic OperationsSetting the GMT OffsetYou can select a city by entering a GMT time difference. 1. After Step 5 of “Setting the Home City/Alternate City” (page 35), press   (Options).2. Select GMT Offset and press   (Select).If you press   (Options), you can select +/–.3. Enter the time difference and press   twice.Setting the Daylight Saving Time (DST)You can set the summer time.1. After Step 5 of “Setting the Home City/Alternate City” (page 35), press   (Options).2. Select DST On/Off and press   (Select).3. Select On or Off and press   (Select).TipIf the DST setting is set to On, the  indicator appears on the display when you set (page 35) or display (page 275) the world clock. The   indicator or DST appears for the time displayed in standby mode.
Basic Operations 37Accessing FunctionsAccessing a Function from the Main Menu1. In standby mode, press   to display the Main menu.2. Use   to select an icon and press   (Select) to display the menu of the function.Games & More: Allows you to download and use games, screensavers and other Java™ applications (page 181).Vodafone live!: Allows you to access the Vodafone live! home page and download pictures, melodies and applications (page 173).Media Player: Allows you to play audio and video files (page 187).Messaging: Allows you to create MMS/SMS/email messages. You can also check received and sent MMS/SMS/email messages (page 131).Camera: Allows you to take pictures and record videos (page 97).My Items: Allows you to check the pictures you took, videos you recorded and other data stored in data folders (page 195).Organiser & Tools: Allows you to use preinstalled applications (page 261).Contacts: Allows you to access and update the Contacts list (page 63).Settings: Allows you to modify and confirm the settings of your phone (page 213).Main Menu Screen
38 Basic OperationsCodesYour security code, centre access code and call barring service code are required for using your phone.Security CodeYour security code is “0000” or the four-digit number you selected when you concluded your contract. It is required to use functions and perform operations on your phone.Centre Access CodeYour centre access code is the four-digit number you selected when you concluded your contract. It is required to perform optional service operations from a fixed-line phone.Call Barring Service CodeYour call barring service code is the four-digit number you selected when you concluded your contract. It is required to set call barring (page 52).
Basic Operations 39Making a Call1. Confirm that the power is on.Confirm that the signal level is sufficient.2. In standby mode, enter a phone number.If you enter the wrong number, each press of   (Clear) deletes the digit on the far right.3. Press .4. Press   to end the call.Making an International Call1. In standby mode, press and hold  .+ appears.2. Enter the country code, area code and other party's phone number.If the other party’s phone number begins with 0, omit the first 0.3. Press .Sending TonesYou can send DTMF tones by pressing digit keys during a call.To disable the sending of DTMF tones, press   (Options) during a call and select DTMF Off.Tip• You can perform the following operations if you press   (Options) after entering a phone number in standby mode.•Voice Call: Makes a voice call.•Video Call: Makes a video call (page 85).•Save to Contacts: Saves the phone number to the Contacts list (page 64).•Send Message: Allows you to create an SMS/MMS message (pages 133, 144).• You can also make a call from the Contacts list (page 75) or the call log (page 43).
40 Basic OperationsAnswering a CallWhen a call is received, the ringtone plays and the external light flashes. If the phone number is in the Contacts list (page 63), the name and phone number of the caller appear on the display.1. Press  (Answer).2. Press   to end the call.Rejecting a CallYou can manually reject an incoming call. To automatically reject calls from specific phone numbers, add the phone numbers to the Rejection list (page 243).1. A call is received.2. Press .Tip•To adjust the ringtone volume while a call is being received, use  or the side keys (  and  ). To set the ringtone volume to mute, press and hold the side key ( ).• If you miss a call, the information prompt (page 22) appears.• You can also use Open to Answer (page 240) or Any Key Answer (page 240) to answer a call.
Basic Operations 41Operations during CallsOptions Available during a CallYou can perform the following operations if you press   (Options) during a call. ◆Hold: Places the call on hold.◆Mute My Voice: Mutes the outgoing sound. ◆Mute All: Mutes both the outgoing and incoming sound. ◆Contacts List: Allows you to reference the Contacts list (page 78). ◆Call Log: Allows you to access the call log (page 43). ◆Voice Record: Records the other party’s voice (page 42). ◆My Details: Displays the owner information (page 81). ◆DTMF Off/On: Allows you to disable or enable the sending of DTMF tones (page 39). TipYou can send and receive messages and access the Web during a voice call. This function is only available while you are in an area with 3G coverage (UMTS area). It is unavailable during a video call even if you are in an area with 3G coverage.
42 Basic OperationsAdjusting the Earpiece Volume during a CallYou can use the navigation key or side keys to adjust the earpiece volume to one of five levels.1. Press   or the side key (  or  ) during a call.The current setting appears.2. Use   or the side key (  or  ) to adjust the earpiece volume.Use  ,   or the side key ( ) to increase the earpiece volume and use ,   or the side key ( ) to decrease the earpiece volume.Recording during a CallVoice Record allows you to record the other party’s voice during a call. The maximum length of one recording during a call is 60 seconds.1. Press   (Options) during a call.2. Select Voice Record and press   (Select).After the maximum length of recording time elapses or the call ends, recording stops and the recording data is saved to the Recordings folder automatically.Tip• To adjust the earpiece volume in standby mode, press and hold   or   and use   to adjust the volume.• To switch the sound to the speaker to enable a handsfree call, press  ( ) during a call.TipFor details on playing Voice Record recordings, see page 272.NoteOnly the other party’s voice is recorded. Your voice is not recorded.
Basic Operations 43Call LogViewing Dialled Numbers/Missed Calls/Received CallsYou can view the last 20 dialled numbers, missed calls and received calls.1. In standby mode, press  , select Contacts and press   (Select).2. Select Call Log and press   (Select).The Call Log screen appears.3. Select Dialled Numbers, Missed Calls or Received Calls and press  .To switch from the Dialled Numbers screen to the Missed Calls screen or Received Calls screen, use  .TipYou can perform the following operations if you press   (Options) while viewing dialled numbers, missed calls or received calls.•View: Displays the details.•Voice Call: Makes a voice call.•Video Call: Makes a video call (page 85).•Send Message: Allows you to create an SMS/MMS message (pages 133, 144).•Save to Contacts: Saves the phone number to the Contacts list (page 64).•To Rejection List: Saves the phone number to the Rejection list (page 243).•Delete: Deletes the entry.
44 Basic OperationsViewing Call TimeViewing Last Call/All Calls1. In standby mode, press  , select Contacts and press   (Select).2. Select Call Log and press   (Select).3. Select Call Timers and press   (Select).4. Select Last Call or All Calls and press   (Select).To reset the call time, select Reset Timers.Viewing Call CostsYou can view the cost for the last call or the total costs for all calls.Viewing Last Call/All Calls1. In standby mode, press  , select Contacts and press   (Select).2. Select Call Log and press   (Select).3. Select Call Costs and press   (Select).The Call Costs list appears.4. Select Last Call or All Calls and press   (Select).To reset the call costs, select Reset Costs.NoteFor accurate information on call costs, contact your service provider.
Basic Operations 45Viewing the CurrencyYou can view the currency for call costs.1. From the Call Costs list (page 44), select Cost Unit and press   (Select).The currency and rate appear.Setting Call Cost DisplayYou can set whether to display the call cost after a call ends.1. From the Call Costs list (page 44), select Call Cost Display and press   (Select).2. Select On or Off and press   (Select).
46 Basic OperationsViewing Data Transfer VolumeYou can view the communication data volume for the last session or all sessions.Viewing Last Data/All Data1. In standby mode, press  , select Contacts and press   (Select).2. Select Call Log and press   (Select).3. Select Data Counter and press   (Select).4. Select Last Data or All Data and press   (Select).To reset the data transfer volume, select Reset Data Counts.
Basic Operations 47Optional ServicesFor details on services, contact your service provider.Voicemail ServiceIf you are unable to answer a call because, for instance, your phone is out of range or a call is in progress, the call is diverted to the Voicemail Centre in accordance with the Voicemail settings so as the caller can leave a message (voicemail). The   indicator appears on the display when you have a new message.Starting the Voicemail Service1. In standby mode, press  , select Settings and press   (Select).2. Select Call Settings and press   (Select).3. Select Voicemail and press   (Select).4. Select Voicemail Settings and press   (Select).The Voicemail Settings screen appears.5. Select Registration and press   (Select).6. Select the diverting condition you want to set and press   (Request/Select).◆All Calls: Diverts a call without your phone ringing. ◆When Busy: Allows you to press   (Busy) to divert an incoming call.◆Not Reachable: Diverts a call when your phone is out of range or the power is off.◆No Answer: Diverts a call if you do not answer it within the set time. ◆All Conditional: Diverts a call that meets any of the other conditions except All Calls.After a network connection is established, the settings complete screen appears.Tip• To change the number for diverting calls to the Voicemail Centre or the number for accessing the Voicemail Centre to listen to voicemail, select Voicemail Centre after Step 4. • To confirm the status of settings, select Status after Step 4 and press  (Request).
48 Basic OperationsListening to Your Voicemail1. In standby mode, press  , select Settings and press   (Select).2. Select Call Settings and press   (Select).3. Select Voicemail and press   (Select).4. Select Call Voicemail and press   (Call).Follow the voice prompts of the Voicemail Centre.Stopping the Voicemail Service1. From the Voicemail Settings screen (page 47), select Deactivate and press   (Request).After a network connection is established, the settings complete screen appears.TipTo listen to your voicemail from standby mode, press and hold .
Basic Operations 49Call Divert ServiceThis service allows you to divert calls you are unable to answer to a preset phone number.Starting the Call Divert Service1. In standby mode, press  , select Settings and press   (Select).2. Select Call Settings and press   (Select).3. Select Call Diverting and press   (Select).4. Select the calls you want to divert and press   (Select).◆All Services: Allows you to set the Call Divert services for all incoming calls.◆Voice Call: Allows you to set the Call Divert service for voice calls.◆Video Call: Allows you to set the Call Divert service for video calls.◆Fax: Allows you to set the Call Divert service for fax communication.◆Data Call: Allows you to set the Call Divert service for data communication.Tip• To confirm the status of all call divert services, select Status after Step 3 and press   (Request).• To confirm the status of call divert services individually, select Status after Step 4 and press   (Request).
50 Basic Operations5. Select the diverting condition you want to set and press   (Select).◆All Calls/All Faxes: Diverts all calls to the preset phone number without your phone ringing.◆When Busy: Allows you to divert an incoming call to the preset phone number by pressing  (Busy).◆No Answer: Diverts a call if you do not answer it within the set time.◆Not Reachable: Diverts a call when your phone is out of range or the power is off.◆All Conditional: Diverts a call that meets any of the other conditions except All Calls.6. Select an input method for the phone number and press   (Select).◆From Contacts: Allows you to select a phone number from the Contacts list (page 74).◆Set Number: Allows you to directly enter a phone number for the divert destination.◆From Call Log: Allows you to select a phone number from the call log (page 43).7. Press  (Request).After a network connection is established, the settings complete screen appears.
Basic Operations 51Stopping the Call Divert Service1. After Step 3 of “Starting the Call Divert Service” (page 49), select Deactivate All and press   (Request).After a network connection is established, the settings complete screen appears and all call divert services are stopped. To stop call divert services individually, select Deactivate after Step 4 of “Starting the Call Divert Service” (page 49) and press   (Request).
52 Basic OperationsCall Barring ServiceThis service stops all outgoing and incoming calls including international calls.Starting the Call Barring Service1. In standby mode, press  , select Settings and press   (Select).2. Select Call Settings and press   (Select).3. Select Call Barring and press   (Select).The Call Barring settings screen appears.4. Select Activate and press   (Select).5. Select Outgoing Calls or Incoming Calls and press   (Select).6. Select a barring condition and press   (Request).◆All Calls: Stops all outgoing and incoming calls. ◆International: Stops all outgoing and incoming international calls.◆Except Local/Home: Stops all outgoing international calls except those to your home network when you are abroad.7. Enter your call barring service code (page 38).After a network connection is established, the settings complete screen appears.Tip• You can still make calls to emergency services (page 27) when the call barring service is enabled.• To confirm the status of the setting, select Status after Step 3 and press  (Request).
Basic Operations 53Stopping the Call Barring Service1. From the Call Barring settings screen (page 52), select Deactivate and press   (Select).2. Select Outgoing Calls, Incoming Calls or All and press   (Request).3. Enter your call barring service code (page 38).After a network connection is established, the settings complete screen appears.Changing Your Call Barring Service Code1. From the Call Barring settings screen (page 52), select Change Password and press  (Select).2. Enter your current call barring service code (page 38). 3. Enter your new call barring service code and press   (OK).4. Re-enter your new call barring service code for confirmation and press   (OK).After a network connection is established, the settings complete screen appears.
54 Basic OperationsCall Waiting ServiceWhen you receive a call during a call, you can place the current call on hold and answer the incoming call. If the incoming call is from a caller whose phone number is in the Contacts list (page 63), the caller’s name and phone number are displayed.Starting the Call Waiting Service1. In standby mode, press  , select Settings and press   (Select).2. Select Call Settings and press   (Select).3. Select Call Waiting and press   (Select).The Call Waiting settings screen appears.4. Select Activate and press   (Request).After a network connection is established, the settings complete screen appears.TipTo confirm the status of the setting, select Status after Step 3.
Basic Operations 55Using the Call Waiting Service1. The call waiting tone is heard during a call. The name and phone number of the caller appears on the display.2. Press  (Options).3. Select Answer and press   (Select) or  .The original caller is placed on hold and a connection is established with the second caller. Both names appear on the display.4. Press   to switch between callers.Stopping the Call Waiting Service1. From the Call Waiting settings screen (page 54), select Deactivate and press   (Request).After a network connection is established, the settings complete screen appears.
56 Basic OperationsMultiparty Call ServiceThis service allows you to call other parties during a call and then switch between the parties or talk to multiple parties simultaneously. A call with up to six people including yourself is possible. The names and/or phone numbers of all the parties appear on the display during the call.1. Enter the phone number of another party you want to call during a call and press .The original party is placed on hold and you can talk to the new party.2. Press   (Options) to perform one of the following operations.◆Multiparty: Allows you to perform the following operations. •Multiparty: Allows you to talk to all parties simultaneously. •Private: Allows you to talk to the selected party only (private call). •Hold: Places the selected party on hold.•Hold All: Places all the parties on hold. •End Call: Ends the call with the selected party. •End All Calls: Ends the call with all the parties. ◆Swap: Allows you to change the party of a private call. ◆Mute My Voice: Mutes the outgoing sound. ◆Mute All: Mutes all the outgoing and incoming sound. ◆Contacts List: Allows you to reference the Contacts list (page 78).NoteThe options that are available vary depending on the call status.
Basic Operations 57◆Call Log: Allows you to access the call log (page 43). ◆Voice Record: Records the other party's voice (page 42). ◆My Details: Displays the owner information (page 81).◆DTMF Off/On: Allows you to disable or enable the sending of DTMF tones (page 39).Caller ID ServiceThis service allows you to set whether to notify the other party of your phone number when you make a call.1. Before the phone number, dial   if you want to notify the other party of your phone number and dial   if you do not want to notify the other party of your phone number.Call Costs ServiceThis service allows you to set whether an estimate for the cost of a call is displayed on the display when the call ends.1. In standby mode, press  , select Contacts and press   (Select).2. Select Call Log and press   (Select).3. Select Call Costs and press   (Select).4. Select Call Cost Display and press   (Select).5. Select On or Off and press   (Select).
58 Basic OperationsCharacter InputCharacter Input ModesYour phone has four character input modes. Use these modes when saving new entries to the Contacts list or creating text messages.Switching Character Input ModesTo switch the character input mode in a character input screen, press   (Options), select Input Method, press   (Select), select a character input mode and press  (Select). The selected character input mode is indicated at the top of the character input screen.◆T9 abc/ T9 Abc/ T9 ABC: Allows you to enter characters in T9 mode (page 59).◆abc/Abc/ABC (Multi Tap mode): Allows you to directly enter letters of the alphabet. Each press of a digit key switches the letter to the next letter assigned to that key. Select abc for all lowercase characters, Abc for initial caps and ABC for all uppercase characters.◆Symbols: Symbol input mode.◆Numeric: Numeric input mode.Tip• You can perform the following operations in T9 mode or Multi Tap mode.• To switch between T9 mode and Multi Tap mode, press and hold .• To switch between initial caps, uppercase, lowercase and numeric input mode, press .• To display the symbols list to enter a symbol, press  .• To enter a space, press  .• To enter a number, press and hold a digit key.• To delete a character you entered, press  (Clear).
Basic Operations 59Entering Characters in T9 ModeIn T9 mode, you only need to press once each of the digit keys to which the letters of the alphabet you want to enter are assigned. During input, predictions of frequently used words are displayed. Simply select a prediction to enter it. Compared to Multi Tap mode, T9 mode is quicker and easier because fewer keystrokes are required to enter characters.1. In a character input screen, switch to T9 mode (page 58).2. Enter characters.Example: To enter “toshiba,” press   .If the word you want to enter does not appear, press   to display the next prediction. 3. Press   to confirm your selection.If you want to reconvert a word after it has been confirmed, press  , highlight the word and press  .Entering Characters in Multi Tap ModeIn Multi Tap mode, you can enter a letter of the alphabet by pressing the digit key assigned to the letter as many times as necessary to display the letter.1. In a character input screen, switch to Multi Tap mode (page 58).2. Enter characters.Example: To enter “toshiba,” press   once,   three times,   four times,   twice,   once,   three times,   twice,   once and  once.Tip• To display a list of conversion predictions, press   three times in Step 2. Select a word and press  (Select) to confirm the word.• If the word you want to enter does not appear in the list of conversion predictions, the word will appear next time if you add it to the T9 dictionary (page 62).• To enter a symbol, press   and then press  .TipTo enter a symbol, press  .
60 Basic OperationsEntering Symbols1. In a character input screen, switch to Symbols mode (page 58).A list of symbols appears.To display the Emoticon list, press  .2. Select a symbol and press  .Using Numeric ModeIn Numeric mode, you can enter a number in a character input screen by simply pressing the digit key to which the number is assigned.Text Editing FunctionsCopy/CutYou can copy or cut a range of characters and store it in the clipboard. You can store up to 20 data items (excluding pictures) in the clipboard.1. In a character input screen, press   (Options), select Copy or Cut and press  (Select).2. Use   to move the cursor to the first character of the range you want to specify and press   (Start).3. Use   to move the cursor to the last character of the range you want to specify and press   (End).NoteThe list of emoticons cannot be displayed for some functions.
Basic Operations 61PasteIn a character input screen, you can paste characters stored in the clipboard.1. In a character input screen, use   to move the cursor to the position you want to paste the characters.2. Press   (Options), select Paste and press   (Select).3. Select the item you want to paste from the clipboard and press  .Undo/RedoDuring text input, you can use this feature to redisplay deleted characters and delete inserted characters, as well as redo operations.1. In a character input screen, enter characters.2. Press   (Options), select Undo/Redo and press   (Select).InsertYou can select information in the notepad (page 274), Contacts list (page 63) or My Details (page 81) and insert it during character input.1. In a character input screen, use   to move the cursor to the position you want to insert an item.2. Press   (Options), select Insert and press   (Select).3. Select Notepad, Contact Details or My Details and press   (Select).4. Select the item you want to insert and press  .NotePerforming the Redo operation after the Undo operation takes you back to the state prior to performing the Undo operation.
62 Basic OperationsSetting the Input LanguageThe language displayed in character input screens is the display language set for the language setting (page 230). You can also change the input language temporarily during character input.1. In a character input screen, press   (Options), select Input Language and press  (Select).2. Select the input language you want to use and press   (Select).Adding a Word to the T9 DictionaryIf you add an item to the T9 dictionary, it will appear in the list of conversions when the matching characters are entered on future occasions.1. In a character input screen in T9 mode, press   (Options), select Add to Dictionary and press   (Select).2. Enter the word you want to add and press   (OK).When you enter a word, the mode switches automatically to Multi Tap.TipIf   (Spell) appears for a word during character input in T9 mode, the word is not in the T9 dictionary. To add the word to the T9 dictionary, press  (Spell).
Basic Operations 63Contacts ListUse the Contacts list when making calls and sending messages. You can save up to 500 Contacts list entries to your phone. You can also save Contacts list entries to the SIM card and memory card. The ability to store the maximum amount of entries will depend on the size of entries and available space in the SIM card or memory card.◆Contacts List: Displays the Contacts list.◆Create Contact: Allows you to add a new entry to the Contacts list.◆Call Log: Displays the Call Log screen (page 43).◆Manage Category: Displays the Category list for organising entries by category.◆Manage Group: Displays the Group list. Groups allow you to send the same message simultaneously to multiple addresses.◆Send My vCard: Converts the owner information to vCard format and sends it to an external device.◆Synchronise: Synchronises the Contacts list. ◆My Details: Displays the owner information and allows you to edit the information. ◆Settings: Allows you to add an entry to the Speed Calling list, set the storage place of the Contacts list and set the scroll speed for the Contacts list screen. ◆Memory Status: Displays the number of Contacts list entries in each of your phone, SIM card and memory card.Contacts Menu Screen
64 Basic OperationsAdding an Entry to the Contacts ListAdding an Entry from the Main MenuAdd new entries from the Create Contact screen. You can set just the required items and modify items or set additional items later.1. In standby mode, press  , select Contacts and press   (Select).2. Select Create Contact and press   (Select).3. Select the item you want to set and press  .The input screen for the selected item appears.◆First Name: Allows you to enter a first name.◆Last Name: Allows you to enter a last name.◆Display Name: Displays the first name and last name you entered automatically. You can also edit the display name.◆Phone Number: Allows you to enter up to three phone numbers. You can enter up to 40 digits for each phone number.◆Email: Allows you to enter up to three email addresses.◆Add Info.: Allows you to enter additional address information.◆Street Address: Allows you to enter a street address.◆City: Allows you to enter a city name.◆State: Allows you to enter a state name.◆Country: Allows you to enter a country name.◆Postcode: Allows you to enter a postcode.◆Job Title: Allows you to enter a job title.Create Contact Screen of the Phone’s Contacts ListNote• The entry cannot be saved unless information is entered for at least one of First Name, Last Name, Phone Number and Email. • Only a name and a phone number can be saved to the Contacts list of the SIM card. •Picture, Settings and Note cannot be set for the Contacts list of the memory card.Tip• You can preset the default storage place for Contacts list entries. For details, see “Setting the Default Storage Place” (page 80).• To clear an item you entered, select Clear Field after Step 5.

Navigation menu