Toshiba TEC OH0004 Bluetooth transmitter for use in printing systems User Manual TEC BTM Manual

Download:
Mirror Download [FCC.gov]
Document ID	608916
Application ID	7i0Joj9Z8v7XSIz91vV7OA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.55kB (419398 bits)
Date Submitted	2005-12-05 00:00:00
Date Available	2005-12-05 00:00:00
Creation Date	2003-03-12 10:36:57
Producing Software	Acrobat PDFWriter 4.05 Windows
Document Lastmod	2005-12-05 18:12:05
Document Title	TEC-BTM_Manual.PDF
Document Creator	Microsoft Word
Document Author:	G0083

DRAFT
TEC BluetoothTM Module for XXXX Series
Installation Manual
Precautions for Handling of Wireless Communication Devices
n Cautions
General
This product is a wireless communication device, and the use of this product is restricted to the
following countries or areas. If the product is used in the countries or areas other than the following,
you may be punished according to the laws of those countries or areas.
Japan, USA, Canada, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Italy Ireland,
Luxembourg, Portugal, Spain, Sweden, Switzerland, The Netherlands, United Kingdom, Australia
For Europe:
Hereby, Toshiba TEC Corporation, declares that this TEC-BTM is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
This ewhich has not been harmonized throughout all EU
and EFTA countries, and can be used in the following countries.
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Portugal,
Spain, Sweden, Switzerland, The Netherlands, United Kingdom
For USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modification not expressly approved by manufacturer for compliance could void the
user’s authority to operate the equipment.
For Canada
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment that is installed outdoors is
subject to licensing.
For Japan
この機器の使用周波数帯域では、電子ﾚﾝｼﾞ等の産業・科学・医療用機器のほか工場の製造ﾗｲﾝ等で
使用されている移動体識別用の構内無線局（免許を要する無線局）及び特定省電力無線局（免許を
要しない無線局）が運用されています。
1. この機器を使用する前に、近くで移動体識別用の構内無線局及び特定小電力無線局が運用されて
いないことを確認して下さい。
2. 万一、この機器から移動識別用の構内無線局に対して電波干渉の事例がした上、下記連絡先にご
連絡頂き、混信回避のための処置等（例えば、ﾊﾟｰﾃｨｼｮﾝの設置など）についてご相談して下さい。
3. その他、
この機器から移動体識別用の特定小電力無線局に対して電波干渉の事例が発生した場合
など何かお困りのことが起きたときには、購入元へお問い合わせ下さい。
(1)
2.4
(2)
F H
(4)
(3)
(1)「2.4」：2.4GHz 帯を使用する無線設備を表す。
(2)「FH」：変調方式を表す。
(3)「1」：予想される与干渉距離を表す。
(4)「
」：全帯域を使用し、かつ移動体識別装置
の帯域を回避可能であることを意味する。
For safety
Do not disassemble, modify, or repair the product.
Doing so may cause injury. Also, modification is against the Laws and Regulations for Radio
Equipment. Please ask your TOSHIBA TEC sales agent for repair.
Do not use the product in locations where the use is forbidden, for example, in an airplane or
a hospital.
When you do not know the forbidden areas, please refer to and follow the airline company or
medical institution, otherwise flight instrument or medical equipment may be affected, causing a
serious accident.
Do not use the product near an automatic control device, such as an automatic door, a fire
alarm, etc.
Doing so may affect the automatic control device, causing an accident.
Immediately stop using the product when it causes a failure of other devices by radio.
Failure to do this may cause malfunctions of these devices, resulting in an accident.
Precaution in use
This product communicates with other devices by radio. Depending on the installation location,
orientation, environment, etc., its communication performance may deteriorate or devices installed
near by may be affected.
Keep away from a microwave.
Communication performance may be deteriorated or a communication error may occur under the
influence of the radio emitted from the microwave.
Keep away from the wireless LAN.
The product and the wireless LAN may interfere with each other, causing a deterioration of
communication performance or a communication error.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
The user is cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Specification
• BTQF
• Built-in protocol stack via serial port profile
• Operating temperature: -5 to 50°C 25% to 85%RH (No condensation)
• Dimensions: 38.1 mm (W) x 25.4 mm (H) x 7 mm (D)
Procedure of attaching TEC into XXXX series
1) Open the media cover and raise it to its full open position.
2) With a small tool, such as a pin punch or a jewellers screwdriver, push to release the
left and right hooks that secure the head cover to the media cover.
3) Take off sensor PCB with small ribbon cable (sensor FPC) from head cover.
sensor FPC
Take off
open cover
4) Attach the TEC into specified space near MAIN PCB.
FPC ribbon cable
MAIN PCB
TEC
5) Connect the both side of FPC ribbon cable to the connector of TEC and the CN3 of
MAIN PCB.
6) Assemble the parts according to reverse procedure.
PRINTED IN JAPAN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
About                           : uuid:741062ee-d3f1-49c3-96e3-d7d584607a90
Producer                        : Acrobat PDFWriter 4.05 Windows
Create Date                     : 2003:03:12 10:36:57Z
Modify Date                     : 2005:12:05 18:12:05-05:00
Metadata Date                   : 2005:12:05 18:12:05-05:00
Creator Tool                    : Microsoft Word
Document ID                     : uuid:78798d7d-a740-433e-b116-c450a507ff14
Instance ID                     : uuid:d6b18645-cf51-4c0c-8a4e-0247f6d25afa
Format                          : application/pdf
Title                           : TEC-BTM_Manual.PDF
Creator                         : G0083
Has XFA                         : No
Page Count                      : 6
Author                          : G0083

EXIF Metadata provided by EXIF.tools