Toshiba 15LV505 User Manual LCD TELEVISION/DVD Manuals And Guides L1002033

TOSHIBA TV/VCR or DVD Combo Manual L1002033 TOSHIBA TV/VCR or DVD Combo Owner's Manual, TOSHIBA TV/VCR or DVD Combo installation guides

User Manual: Toshiba 15LV505 15LV505 TOSHIBA LCD TELEVISION/DVD - Manuals and Guides View the owners manual for your TOSHIBA LCD TELEVISION/DVD #15LV505. Home:Electronics Parts:Toshiba Parts:Toshiba LCD TELEVISION/DVD Manual

Open the PDF directly: View PDF .
Page Count: 68

Download
Open PDF In Browser	View PDF

TOSHIBA
Introduction
..........................

VIDEO

1 5-inch* Diagonal
COMBINATION

"IGITALAUDIOD I G

I T A L

LCD TV/DVD

DigitalOut

Connections

Basic setup

15LV505
15LV506

TV operation

Basic playback

OWNER'S

MANUAL
Advanced playback

Owner's Record
The model number and serial number
are on the back of your TV/DVD.
Record these numbers in the spaces
below. Refer to these numbers
@2008 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
*Screen size is approximate.

whenever you communicate with your
Toshiba dealer about this TV/DVD.
Model number:
Serial number:

Dear Customer,
Thank you for purchasing this Toshiba LCD TV or TV/DVD
Combination television.
This manual will help you use the many exciting features of
your new LCD TV. Before operating your LCD TV or TV/DVD
Combination,

please read this manual completely, and keep it

nearby for future reference.

Safety Precautions

The Issue

WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

WARNING

CAUTION:
SHOCK,

TO REDUCE

DO NOT

REMOVE

THE

RISK

COVER

OF ELECTRIC

(OR

Congratulations
on yourpurchase!Asyou enjoyyour
newproduct, please keepthesesafetytips in mind:
• The home theater entertainment experience is a growing trend
and larger flat panel displays are popular purchases. However,
flat panel displays are not always supported on the proper stands
or installed according to the manufacturer's recommendations.
• Flat panel displays that are
inappropriately situated on dressers,
bookcases, shelves, desks,
speakers, chests or carts may fall
over and cause injury.

BACK).

TOSHIBACares!

NO USER-SERVICEABLE
PARTS INSIDE.
REFER
SERVICING
TO QUALIFIED
SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle,
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

CAUTION:

To reduce
the risk of electric
shock,
do not use the polarized
plug with an extension
cord, receptacle,
or other outlet
unless the blades
can be inserted
completely
to prevent
blade
exposure.
ENERGY STAR _ qualified TV. Products that earn
the ENERGY STAR prevent green house gas
emissions by meeting strict energy efficiency
guidelines set by the U.S. Environmental
Protection Agency and the U.S. Department of
Energy. ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.

NOTETOCATVINSTALLERS
This is a reminder to call the CATVsystem installer'sattention
to Arq[icle820-40 of the NEe, which provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to grounding system of the building, as closeto the point of
cable entry as practical. For additional antenna grounding information,
see item 26 on page 5.
WARNING: Handling the cord on this product or cords associated
with accessoriessold with this product will expose you to lead, a
chemical known to the State of California to cause bin[h defects or
other reproductive harm. Wash hands after handling.

• The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.

TuneInto Safety
• Onesizedoes NOTfit all. Followthe manufacturer'srecommendations
for the safe installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don't allow children to climb on or play with furniture and
television sets.
• Don't place flat panel displays on furniture
that can easily be used as steps, such
as a chest of drawers.
• Remember that children can
become excited while watching a
program, especially on a "larger
than life" flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.
• Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.

Wall Mounting: If you decide to wall mountyour
flat panel display, always:
• Use a mount that has been recommended by tile display
manufacturer and/or listed by an independent laboratory (such
as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount
manufacturers.
• If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional
installer.
• A minimum of two people are
required for installation. Flat panel
displays can be heavy,

c.... _,_,_,o_A_o_
www.CE.org/safety

FCC compliance

information

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
FOC Declaration
of Conformity
Compliance
Statement (Part 15):
The Toshiba 15LV505, 15LV506 LCD TV/DVD Combination complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

NOTE:

CAUTION:

The party responsible for compliance to these rules is:
Toshiba America Consumer Products, LL.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: (800) 631-3811 or visit TACP's website at www.tacp.Toshiba.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by Toshiba could void the user's authority to operate this
equipment.

CAUTION:
THIS DIGITAL VIDEO PLAYEREMPLOYSA LASER SYSTEM.

=--Z
a
Q..
C

£,

Location of the required Marking
The rating sheet and the safety caution are the rear of the unit,

TO ENSURE PROPER USEOF THIS PRODUCT,PLEASE READ
THIS OWNER'S MANUAL CAREFULLYAND RETAIN FOR
FUTURE REFERENCE. SHOULD THE UNITREQUIRE
MAINTENANCE,CONTACT AN AUTHORIZEDSERVICE
LOCATION.

iF
iiii iiiiiiiiii

USE OF CONTROLS, ADJUSTMENTSOR THE PERFORMANCE
OF PROCEDURESOTHER THAN THOSE SPECIFIED HEREIN
MAY RESULTIN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURETO LASER BEAM, NEVER
OPEN THE ENCLOSURE.VISIBLE LASER RADIATION MAY BE
PRESENT WHEN THE ENCLOSURE ISOPENED. NEVER STARE
INTO BEAM.

CERTIFICATION: COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

ON DISPOSAL
The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental
considerations. For disposal or recycling information, contact your local authorities or the
Electronic Industries Alliance (www.eiae.org).

6/22/_91

J51T0101D.indb 3

'_¶_rj_

4:28:44

SAFETY INSTRUCTIONS
Important

Safety Instructions

Installation,

Care, and Service

1
2
3
4

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Installation
Follow these recommendations and precautions and
heed all warnings when installing your TV:

Do not use this apparatus near water.

15) To avoid damage to this product, never place or

Clean onlywith drycloth.

Do not block any ventilation openings.
Install in accordance withthe manufacturer's instructions•

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or
grounding type plug, A polarized plug has two blades
with one wider than the other•A grounding type plug has
two blades and a third grounding prong•
The wide blade or the third prong
are provided for your safety. If
Wideptug
the provided plug does not fit into
your outlet, consultan electrician for
replacementof the obsoleteoutlet.

10) Protect the power cord from being walked
on or pinched,particularlyat plugs,
convenience receptacles, andthe point
where they exit from the apparatus•
11) Only use attachments/accessories
manufacturer.

store the TV in direct sunlight; hot, humid areas;
or areas subject to excessive dust or vibration.

DANGER: RISK OF SERIOUS
PERSONAL INJURY, DEATH, OR
EQUIPMENT DAMAGE! Never place
the TV on an unstable cart,
stand, or table. The TV may fall, causing
serious personal injury, death, or serious
damage to the TV.

18) Never place items such as vases, aquariums, or
candies on top of the TV.
19) WARNING: Always place the TV on the floor or a
sturdy, level, stable Sturdy tie (as short as possible; rnin.4 in.)
surface that can•
_ i _
Clip
support the weight
Ill i _
......_/\
of the unit. To
Ill '__ Hooks X_/__'\ "_,/_)
secure
theTV
usea
I_
J ',B
....
'
.[! 1 i_
Screw
s[uruys[rap from [ne_
.::
_:y
hooks on the rear
__
TVbp
of the TV pedestal ITV side } # uanu
to a wail stud, pillar
or other immovable structure. Make sure the strap is
tight, secure, and parallel to the floor.

specified by the

20) Never expose the apparatus to dripping or splashing
liquid or place items such as vases, aquariums, any
other item filled with liquid, or candles on top of the TV.

13) Unplug this apparatus during

lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel,
Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped•

Safety Precautions

14a) CAUTION: If the TVis dropped and the cabinet or
enclosure surface has been damaged or the TV does
not operate normally, take the following precautions:
• ALWAYS turn off the TV and unplug the power
cord to avoid possible electric shock or fire.
• NEVER allow your body to come in contact with
any broken glass or liquid from the damaged
television. The LCD panel inside the TV contains
glass and a toxic liquid• tf the liquid comes in contact
with your mouth or eyes, or your skin is cut by
broken glass, rinse the affected area thoroughly with
water and consult your doctor.
• ALWAYS contact a service technician to inspect
the TV any time it has been damaged or dropped.
14b) WARNING: To prevent the spread of fire, keep
candies or other open flames away from this product
at all times.

J51T0101[J.i_o

may void: a) the warranty, and b) the user's authority to
operate this equipment under the rules of the
Federal Communications Commission.
17)

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.

Additional

16) Never modify this equipment• Changes or modifications

21) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides.
Never place the TV:
• onabed,sofa,rug,orsimilarsurface;
• too close to drapes, curtains,
or wails; or
• in a confined space such as
a bookcase, built-in cabinet,
or any other place with poor ventilation.
Theslotsandopeningsare providedto protectthe TV from
overheatingandto help maintainreliableoperationof the TV.
Leave a spaceof at least 4 inches around the TV.
22) Always place the back of the television at least four
(4) inches away from any vertical surface (such as a
wall) to allow proper ventilation.
23) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord
is subject to wear or abuse.
24) Never overload wail outlets and extension cords.
25) AlwaysoperatetheTVwitha 120VAC,60Hzpowersourceonly.
polarizedplug withan extensioncord,receptacle,or otheroutlet
unlessthe bladescan be insertedcompletelywiththree-wire
J groundingtype
AUTION:Toreducethe
riskof electricshock,do not usethe
to preventbladeexposure.

4
4_lrr

6/22/09

4:28:45

SAFETY
Installation

INSTRUCTIONS

(cont. from previous page)

26) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see
Section 810 of the National Electric Code.)
_-_
/
/Ground

.l[ I_-J
clamp

_ Antenna discharge unit

/ _J- I (NEC Section 810-20)
I
/ J_h Grounding conductors
---_/._///._
(NEC Section 810-21)
Ground clamps

Power service gro_
electrode system
(NEC Art 250 Part H)

27)

Care

(cont. from previous column)

32) During normal use, the TV may make occasional
snap ping or popping sounds. This is normal,
especially when the unit is being turned on or off.
If these sounds become frequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Center.

=--j
a
Q..
C

lead-in wire

_x
//_'-_

EI_
I
eauiDment
L-_
jpment

Antenna

(Continued)

DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
• Use extreme care to make sure you
are never in a position where your body
(or any item you are in contact with,
such as a ladder or screwdriver) can
accidentally touch overhead power lines.
Never locate the antenna near overhead
power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity: a) an antenna system; or b) cables,
wires, or any home theater component connected
to an antenna or phone system.

33) Keep your fingers well clear of the disc slot as it is closing.
Failure to do so may cause serious personal injury.
34) When you use headphones, keep the volume at a
moderate level. Using headphones continuously
at a high volume may cause hearing damage.
35) NEVER took directly into the disc slot or ventilation
slots at the source of the laser beam. Doing so
may cause sight damage.
36) NEVER use a cracked, deformed, or repaired disc.
Such discs are easily broken and may cause serious
personal injury or product damage. SUCH DAMAGE
IS NOT COVERED UNDER YOUR WARRANTY.
37) WARNING: RISK OF SERIOUS PERSONAL
INJURY OR EQUIPMENT DAMAGE!
• Never strike the screen with a sharp or heavy
object.
• Never touch, press, or place anything on the
LCD screen. These actions will damage the LCD
screen If you need to clean the LCD screen,
follow the instructions in item 28 on this page.

Service

Care

38) /_

For better performance and safer operation of your
TOSHIBA TV, followthese recommendations and precautions:
28) Always unplug the TV before cleaning.
Wipe the display panel
surface gently using only a
soft cloth (cotton, flannel,
etc.) A hard cloth may
damage the surface of the
panel. Avoid contact with
alcohol, thinner, benzene,
acidic or and alkaline solvent cleaners, abrasive
cleaners, or chemical cloths, which may damage
the surface. Never spray volatile compounds such
as insecticide on the cabinet. Such products may
damage or discolor the cabinet.
29) _

WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of
any kind into the TV cabinet slots.

WARNING:RISK OF ELECTRIC SHOCK!
Never attempt to service the TV
yourself.
Opening and removing the covers
may expose you to dangerous voltage or other
hazards. Failure to follow this WARNING may
result in death or serious injury.
Refer all servicing to a Toshiba Authorized Service
Center.

39) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
• Upon completion of service, ask the service
technician to perform routine safety checks to
determine that the TV is in safe operating condition.
40) When the TV reaches the end of its useful life,
ask a qualified service technician to properly
dispose of the TV.

30) While it is thundering, do not touch the connecting
cables or apparatus.
31 ) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the
TV unattended or unused for long periods of time.

6/22/_91
J51T0101D.indb

4:28:46

• To Displayyour LCDTV on the includedPedestalStand:
Observe the following safety precautions:
1) Place the TV on a sturdy, level surface that can
support the weight of the TV.
2) Be sure to secure the TV to a wall, pillar, surface, or
other immovable structure. To secure the TV in this
manner, use the included strap located at the rear of
pedestal stand. (see item 19, page 4).

The following symptoms are technical limitations of
LCD Display technology and are not an indication of
malfunction; therefore, Toshiba is not responsible for
perceived defects resulting from these symptoms.

• Moisture condensation may occur in the following
situations:

1) An after image (ghost) may appear on the screen
if a fixed, non-moving image is displayed for a long
period of time. The after image is not permanent and
will disappear in a short period of time.
2) The LCD panel contained in this TV is manufactured
using an extremely high level of precision technology;
however, there may be an occasional pixel (dot of light)
that does not operate properly (does not light, remains
constantly lit, etc.). This is a structural property of
LCD technology, is not a sign of malfunction, and is
not covered under your warranty. Such pixels are
not visible when the picture is viewed from a normal
viewing distance.
Note: Interactive video games that involve shooting a
"gun" type of joystick at an on-screen target may not
work on this TV.

•
•

•

•
•

Do not subject the LCD panel to physical shock, such
as dropping it. It may cause unit damage and malfunction.
When shipping the unit, the original shipping carton
and packing materials come in handy. For fully
protection, repack the unit as it was originally packed
at the factory.
Do not use volatile liquids, such as insecticide, near
the unit.
Do not leave rubber or plastic products in contact with
the unit for prolonged periods of time.
Doing so will leave marks on the finish.
The top and rear panels of the unit may become warm
after a long period of use. This is not a malfunction.
When the unit is not in use, always remove the disc
and turn off the power.

•

When you move the unit from a cold area to a warm area.

•

When you use the unit in a room in which the heat
was just turned on.

•

When you use the unit in an area where cold air from
an air conditioner directly hits the unit.

•

When you use the unit in a humid area.

• Never use the unit when moisture condensation
may occur
Using the unit when moisture condensation exists may
damage discs and internal parts. Connect the power
cord of the unit to the wall outlet, turn on the unit,
remove the disc, and leave it for two or three hours.
After two or three hours, the unit will have warmed up
and evaporated any moisture. Leaving the TV
connected to the wall outlet will help prevent moisture
condensation in the TV or DVD Player.

• When you place this unit near a TV, radio, or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, place the unit away
from the TV, radio, or VCR.
• To avoid damage to this product, never place or store
the TV/DVD in direct sunlight; hot, humid areas; or
areas subject to excessive dust or vibration.

J51T0101[!.i_o

Moisture condensation damages the unit. Please
read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day and drops
of water form on the outside of the glass. In the same
way, moisture may condense on this unit's internal optical
pick-up lens, one of the most crucial internal parts of the unit.

Wall outlet

6
4_lrr

6/22/09

4:28:47

on discs

•

Do not touch the playback side of the disc.
For example, handle the disc so that it is shown in
figure below.

The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.

O
•

Do not attach paper or tape to discs.

a
0.
c
£,

Playback side
This owner's manual explains the basic instructions of this
unit. Some DVD video discs are produced in a manner
that allows specific or limited operation during playback. As
such, the unit may not respond to all operating command.
This is not a defect in the unit. Refer to instruction notes of
discs.

•

Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.

Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.

•

Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.

•

The following symbol may appear on the TV screen during
operation.
it means that the operation is not permitted by the TV/DVD
or the disc.
For example, sometimes it is unable to stop the playback
of copyright message of the disc when the STOP (11)
button is pressed. Alternatively, this symbol may also
indicate that the feature is not available for the disc.

The region number of this unit is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not find _ or _,
disc
playback will not be allowed by the player. (In this case,
the unit will display a message on-screen.)
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.

This unit supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.
• Video CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this unit in the same
way as a DVD.
• Video CD equipped with PBC function (Version 2.0)
in addition to operation of a Video CD not equipped with
the PBC function, you can enjoy playback of interactive
software with search function by using the menu
displayed on the TV screen (Menu Playback). Some of
the functions described in this owner's manual may not
work with some discs.

Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1_
Chapter

Chapter 2

Title 2
Chapter 1

Chapter 2

Chapter 3

Video CD/Audio CD
Track 2

Track 3

Track 4

Video CD/Audio CD

Each title, chapter or track is assigned a number, which
is called "title number", "chapter number" or "track
number" respectively.
There may be discs that do not have these numbers.

J51T0101D.indb

4_r_
_/

6/22/0

4:28:48

on discs (Continued)

This unit can play the following discs.
Disc Mark

Contents

Disc
Size

Maximum
playback time
Approx• 4 hours
(single sided disc)

Audio

ovo

video

discs

V I D EO

12cm

+
Video
(moving
pictures)

8 crn

Approx• 8 hours
(double sided disc)
Approx. 80 minutes
(singIe sided disc)
Approx. 160 minutes
(double sided disc)

V,0eo
CDs

{DIGITAL

VIDEO]

Audio
CDs
DIGITAL

Audio
+
Video

12cm

Approx. 74 minutes
(single sided disc)

(moving
pictures)

8crn

Approx. 20 minutes
(single sided disc)

12cm

Approx. 74 minutes
(single sided disc)

8crn

Approx. 20 minutes
(single sided disc)

Audio
AUDIO

The following discs are also available.
• DVD-R/RW discs of DVD video format

• CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or
JPEG format
• Kodak Picture CD and FUJICOLOR CD format
Some of these discs may be incompatible.
You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM, CDROM, Photo CD, etc., or non standardized discs even
if they may be labeled as above.
• Some CD-R/RWs cannot be played back depending
on the recording conditions.
• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).
• This unit can play an 8cm disc. Please do not use a
disc adapter. It may cause trouble.
• Please do not insert any disc of an irregular shape into
the unit, as it may interfere with the function of the unit.
You may not be able to remove it.
• Please do not use after market accessories, such as a
ring protector, as this may cause trouble with the
operation of the unit.
Because of problems and errors that can occur during the
creation of DVD and CD Software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that the
DVD player contained in this TV will successfully play
every disc bearing the DVD and CD Iogos.
If you happen to experience any difficulty playing a DVD
and/or CD disc on the DVD player contained in this TV,
please contact Toshiba Customer Service.
is a trademark of DVD Format/Logo Licensing
Corporation.

J51T0101[!.i_o

8
4_vr

6/22/09

4:28:49

Introduction

Basic playback

SAFETY INSTRUCTIONS ................................ 4
Precautions .......................................................
6
Notes on discs ..................................................
7
Contents ...........................................................
9
Identification of controls .................................. 10

Playing a disc .................................................

=--j
Advanced

Connections
Antenna connections ......................................
Cable TV connections ....................................
Connecting to optional equipment ..................
Power source ..................................................

14
15
16
19

Basic setup
Auto setup ......................................................
Setting the language .......................................
To memorize channels ....................................

20
21
22

playback

Zooming ..........................................................
Locating desired scene ...................................
Marking desired scenes ..................................
Repeat playback .............................................
A-B Repeat playback ......................................
Program playback ...........................................
Random playback ...........................................
Changing angles ..............................................
Title selection ...................................................
DVD menu .......................................................

45
45
46
47
47
48
48
49
49
49

Changing soundtrack language .......................
Subtitles ...........................................................
Disc status .......................................................
To turn off the PBC ..........................................

50
50
51
51

Q.
C

£.

MP3/WMA/JPEG and Audio CD operation ...... 52
Repeat, random and program playback
using file browser ............................................. 55

TV operation

TV operation ...................................................
25
Labeling channels ........................................... 27
Labeling video inputs...................................... 28
Setting the V-Chip ........................................... 29
Setting the closed captions ............................. 33
CC advanced ..................................................
34
Adjusting the picture preference ..................... 35
Picture settings ...............................................
35
Viewing the wide-screen picture formats ........ 36
Film Mode .......................................................
37
DNR ................................................................
37
Sound control adjustment ............................... 38
Selecting Stereo/Second Audio Program (SAP) .... 38
Selecting the audio language ......................... 39
Using the aspect feature ................................. 39
Setting the POWER indicator ......................... 40
Adjusting the back lighting .............................. 40
Setting the Auto Shut Off ................................ 41
Resetting your settings ................................... 41

Function

setup

Customizing the function settings .................... 57
Temporary cancel the rating level
by DVD disc ..................................................... 61

Others
Understanding the Power Return feature ........ 62
Troubleshooting ............................................... 62
Reception disturbances ................................... 64
Language code list .......................................... 65
Specifications .................................................. 66
Limited United States Warranty ....................... 67

6/22/991
J51T0101D.indb

4_lrr

4:28:50

of controls

Speaker

Ill

Remote

sensor

POWER

CH V [_/•

MENU button [_

c slot

indicator

STOP button

INPUT/ENTER
(b POWER

i,,,|

CH A [_/I_

PLAY button [_

VOLUME (+/-) buttons [_

button [_

A EJECT button

button

@}
INPUT/ENTER

(_
®POWER

mSTOP

0
v

_PLAY

VOL +

10
J51T0101E

.indb

6/22/09

4:28:50

a
Q.
C

UUUUUUUUUU_

UUUUUUUUUU

AC INPUT
cover [_

AC INPUT [_

Antenna jack [_

COLORSTREAM

VIDEO/GAME

J51T0101D.indb

COAXIAL DIGITAL AUDIO OUT jack [_

HD IN jacks [_
IN jack [_

HEAD PHONE jack [_

4_Ft

6/22/0

4:28:52

of controls (Continued)

The instructions

in this manual describe the function on the remote control. See the page in [_

EJECT button [_
TV/DVD button [_

for details.

POWER button [_

SLEEP button [_

Direct channel selection
buttons (0-9)
Numbered buttons (0-9) [_

DISPLAY button [_

JUMP button [_
Direct channel selection button (m) [_

OH A/V button [_
SUBTITLE button [_

-INPUT button [_
ZOOM button
PLAY MODE button [_

[_[_

MUTE button [_
PLAY MODE

DVD MENU

*DVD MENU button [_
ENTER button [_

,L_

PLAY button [_

Direction buttons (_-/'_/4/_)

MENU button [_
SETUP button [_
PAUSE button _
CH RTN button [_
SKIP (l_e!)button [_)
REV button [_
FF button I_
SLOW (-,I) button [_>
TOP MENU button [_
RETURN button [_

AUDIO SELECT button [_
VOL +/- button [_

EXIT/CANCEL button
---

---

STOP button [_
CLOSED CAPTION button [_
SKIP (l_l)button

SLOW

ANGLE

MARKER

cgcpo@
--

[:_

SLOW (t,-) button [:_

MARKER button [_
ANGLE button [_
REPEAT A-B button [_

GAME button [_

PIC SIZE button [_

TOSHIBA
SE R0305

L.
*DVD MENU button
Use the DVD MENU button to
display the menu included on
many DVD video discs.
To operate a menu, follow the
instructions in "DVD menu." [_

12
J51T0101[.indb

4_lrr

6/22/09

4:28:53

=-2
a
Open the battery compartment
cover in the direction of the
arrow.

Q..
C

Install two "R03/AAA" batteries
(supplied), paying attention to
the polarity indicated in the
battery compartment.

Replace the compartment
cover.

Aim the remote control at the remote sensor and press control buttons to operate.
Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.

U
Approx. 5 meters

l
Caution:
Never throw batteries into a fire.
Note:
Be sure to use AAA size batteries.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with
new ones.
When necessary to replace batteries in the remote control, always replace both batteries with new ones.
Never mix battery types or use new and used batteries in combination.
Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended
period of time. This will prevent battery acid from leaking into the battery compartment.

13
6/22/oj
J51T0101D.indb 13

'_¶_r)_

4:28:54

....

i_
"
"
tenna, follow the "nstructlons
below that correspond to your antenna system.
If you are using a cable TV service (CABLE), see [_ for Cable TV connections.

-x
Connect the 75 ohm cable from the combination
Antenna

Antenna

jack

VHF/UHF antenna to the antenna jack on the back
of the TV/DVD.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, use the 300-75 ohm matching
transformer (not supplied).

75 ohm coaxial cable
(not supplied)
300-75 ohm matching
transformer (not supplied)

x._

S
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching transformer
(not supplied). Attach the transformer to the combiner,
then attach the combiner to the antenna jack on the
back of the TV/DVD.

Antenna
jack

300-75 ohm matching
transformer (not supplied)

C° 'ner: 'CX
(not supplied)

UHF 300 ohm
....
twin-lead wire ....
(not supplied)

300 ohm
twin-lead wire
(not supplied)

f
Connect the VHF 75 ohm cable and UHF 300 ohm
Antenna
jack

twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack on the back
of the TV/DVD.

(not supplied) "_,_-"'___q_'
UHF 300 ohm
"twin-lead wire
(not supplied)

J51T0101[.indb

6/22/09
_J

4:28:54

ble

TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some cable companies offer "premium pay channels" inwhich the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.

f
Antenna
jack

75 ohm
coaxial cable

For basic cable service not requiring a converter/descrambter
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the TV/DVD.

o
O

O
6')

If you subscribe to a cable TV service which requires the use of a converter/descrambter box, connect the
incoming 75 ohm coaxial cable to the converter/descrambter
box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambter box to the antenna jack on the TV/DVD. Follow the connections
shown below. Set the TV/DVD to the output channel of the converter/descrambter
box (usually channel 3 or 4)
and use the converter/descrambter
box to select channels.

-m

Incoming 75 ohm
Cable TV
j

Converter/
descrambler

_.
_

Antenna
jack

75 ohm cable to
TV/DVD

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require
the use of a converter/descrambter
box, you may wish to use a signal splitter and an A/B Switch box (available
from the cable company or an electronics supply store). Follow the connections shown below. With the switch in
the "B" position, you can directly tune any nonscrambted channels on your TV/DVD. With the switch in the "A"
position, tune your TV/DVD to the output of the converter/descrambter
box (usually channel 3 or 4) and use the
converter/descrambter box to tune scrambled channels.

Incoming
75 ohm
Cable TV

descrambler
litter

A/B switch

75 ohm cable
to TV/DVD

Antenna
jack
,_

Converter/

15
6/22/091
J51T0101D.indb

4:28:55
_/

0-3
CH A/V
INPUT

nnecting to optional equipment
......... Youcan enjoy VCR, camcorder or TV game with connection to external input.

GAME

Press INPUT to view a signal from another device connected to your TV/DVD, such
as a VCR player• You can select TV, Video or CotorStream HD depending on which
input jacks you used to connect your devices.
Press INPUT on the remote control to display the current signal source•
To change the input source, press INPUT again or press 0-2. (3 is for selection DVD
mode.)

To playback from the VCR, connect the VCR to the TV/DVD as shown.
Select the "Video" by pressing INPUT repeatedly.
flow

•

Signal

Ir
I'_1

t _

==_

VCR

Back side

(yellow),_.

(red
(white)_

_ _ _ TeAudie/VideeOUTI_>

ll_

ToVIDEO/GAMEIN

,oMdeocablo!notsoppliod!
l
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Select the "Video" by pressing INPUT repeatedly.
" Signal flow

(yellow)__

(white)_

Camcorder
t

Back side
I _-__t

[fs ©,.s /

Ill_

(re_

To VIDEO/GAME

To
Audio/Video
OUT
I
AudioNideo

cable (not supplied)

You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes.
1• Connect a TV Game to the TV/DVD•
2. Select the Game mode by pressing GAME. The Game mode screen appears•
• If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen
appears on the screen.
Back side
4
Signal flow
I
TVGAM E
]
(yellow)_
(white)@

ttt
W

To Audio/Video
AudioNideo

OUT

(red[_

cable (not supplied)

I11_,_ _BI ToVIDEO/GAME
IN

Note:
• You can also change the TV/DVD screen to the desired mode by pressing the CH ^ / V•
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of
different types of signal generated by these devices and subsequent hook-up variations required, they have not all
been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual
for additional information.
• Interactive video games that involve shooting a "gun" type of joystick at on-screen target may not work on this
TV/DVD.

16
J51T0101[

.indb

'-r_

6/22/09

4:28:55

If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must
also connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video
signal. The audio signal is separated.
Select the "Video" by pressing INPUT repeatedly.
To S-VIDEOIN
" Signal flow

To Audio

(L/R) OUT

t To S-VIDEO

,wh,te, q

Ex. VCR with S-Video
_1--1

Back aide

.j@©

I11_

(playback)
(red) To VIDEO/GAMEIN

OUT

S-Videocable (notsupplied)
Audiocable (not supplied)

To AUDIO

(L/R) IN

Note:
• When the S-Video cable and the standard video cable are connected atthe same time, the S-video cabletakes
precedence.

Your TV/DVD is capable of using CotorStream ® (component video). Connecting your TV/DVD to a component
video compatible DVD player, such as a Toshiba DVD player with CotorStream <°'_
can greatly enhance picture
quality and performance.
Select the "CotorStream HD" by pressing INPUT repeatedly.
Back side

Ex. DVD player with Component video

Signal flow

(Y,PB.PR)IN

¢ooooo

_ _

t TOComponent
VideoOUT HD E_--_-_O@
ToCOLORSTREAM
I__
_
Componentvideo cab!e

ToAud'°' ' 'OUT I
(not supplied)
Audiocable (not

supplied)

(white).......
_
_r

.... (red)
To COLORSTREAMHD
AUDIO (L/R)IN

S ........................................................................................................................................................................................................................................

When using the Component video cable,
_an Audio cable must be connected to
i COLORSTR EAM HD AUDIO(L/R)/N jacks.
Note:
• The ColorStream _ (component video) inputs on this unit are for use with devices that output 480i, 1080i interlaced signals and 480p, 720p progressive signals.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
unit away from the tuner and radio.

J51T0101D.indb 17

'_¶_r)_

6/22/0

4:28:57

nnecting to optional equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the
TV/DVD to optional audio equipment.

, This section uses the following reference mark.
Front speaker
Rear speaker
Sub woofer

N - Center speaker
_
Signal flow

Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital
recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier equipped with a Dolby
Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the
Dolby Surround mark.
Back side

©©©

Dmplifierequipped with a 1
olby Digital decoder

To COAXIAL
AUDIO OUT

DIGITAL

I
f .......

U
,_,F,'

type digital
audio input
To COAXIAL

75 _ coaxial cable (not supplied)

Manufactured under license
from Dolby Laboratories.
Dolby and the double-D symbol
are trademarks of Dolby
. Laboratories.

Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.

Back side

©@©

Amplifier equipped with |
a DTS decoder
|

type digital
audio input
To COAXIAL L_

To COAXIAL DIGITAL
AUDIO OUT
f ........

75 _ coaxial cable (not supplied)

Manufactured under license
under U.S. Patent #: 5,451,942 &
other U.S. and worldwide
patents issued & pending. DTS
and DTS Digital Out are
registered trademarks and the
DTS Iogos and Symbol are
trademarks of DTS, inc.
(c}1996-2007 DTS, inc. All Rights
Reserved.

MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Back side
Amplifier equipped with an l
MPEG2 audio decoder

To COAXIAL
AUDIO OUT

DIGITAL

type digital
audio input
To COAXIAL L

75 _ coaxial cable (not supplied)

18
J51T0101[.indb

6/22/09

4:28:58

nnecang to optional equipment (Continued)/
Power source

2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Note: PCM audio is limited to DVD or CD playback.
Back side
Amplifier equipped with a l
Digital audio input I

To COAXIAL DIGITAL
AUDIO OUT

©@©

O
6')

[]

type digital
audio input
To COAXIAL L_

75 _ coaxial cable (not supplied)

Note:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TWDVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wal! outlet
before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level.
Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier's power on, the speakers
may be damaged.

To use AC power source
1. Open the AC INPUT cover.
2. Connect the AC cord plug into this TV/DVD's AC INPUT jack, then close the AC INPUT cover.
3. Connect the AC cord into an AC outlet.

AC Outlet
and Blade

Wider Hole _!
®@®
@®e@
@@@

@
[]

AC 120V, 60Hz

AC cord (supplied)
Note:
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade, it is the user's
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
• If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER.

19
6/22/091

J51T0101D.indb 19

,_¶_rg_

4:28:59

Setup
The Auto Setup function helps to install your TV/DVD easily.
It leads you the Language selection, Air/Cable selection and Automatic
channel search.
IMPORTANT: Make sure that the antenna
connection is madet

POWER

OOC)_
(ZZ)CD ()
_) CD eL_)
()

or cable TV system

C_)

t9 t,,_o
"J< _X

:'J ....

.............
ENTER
• / V/'4 / •
EXIT/CANCEL

CfiD(_

To turn on the TV/DVD, press POWER,
• POWER indicator on the front of the unit
changes blue. It may take approx. 10 seconds
for a picture to appear on screen.

Now the "Automatic

CTD

Search"

starts.

O, 1,
Auto Setup
appears
on the screen.
Press
• or •menu
to select
"Language",
then
press • or • to select your desired language.

• If you press EXIT/CANCEL,
the Automatic
Search stops and changes to the TV screen.
• After the starting setup is completed, the TV
channel appears on the screen.

Note:
• The Auto Setup function will work only when you
press POWER for the first time.
• The process of "Automatic Search" may take 15 to
30 minutes to complete, depending on your regional
cable service.

Press • or
press
or • to select
select"Signal
"Air" or "Cable".
Type", then

Presspress
• or • or
to select
then
ENTER."Automatic

Search",

J51T0101E!.i_oOo
6/22/09
J

4:29:00

tting

POWER

ooo0

the language

This TV/DVD can display the on screen language in English, French or
Spanish.
Select the language you prefer first, then proceed with the other menu options.

MENU
=

ENTER
• / v/4 / •
EXIT/CANCEL
CZ) (

To turn on the TV/DVD, press POWER.
• POWER indicator on the front of the unit

Press • or
• to select
the desired
language:
English,
French
(Frangais)
or Spanish
(Espafiol).

changes blue. It may take approx. 10 seconds
for a picture to appear on screen.

Press MENU.

The TV menu screen

appear. Press • or • to select
press • or ENTER.

) C]7)

O')
i,
¢)

will

"Setup",

then

MENU
SETUP

Press
screen. EXIT/CANCEL

to return to the normal

EXIT/
CANCEL

Note:

• If the unit does not operate properly, or No key
operation (by the unit and/or the remote control):
Static electricity, etc., may affect the TV/DVD's
operation. In such case, disconnect the AC cord once,
then connect it again.
• If no buttons are pressed for more than about 60
seconds, the MENU screen will return to normal
operation automatically.
• The TV section has its own menu and the DVD

Press • or • to select "Language".

section also has its own menu [_.

21
m22/oJ
J51TO101D.indb

_kh
_J

4:29:01PM

memorize channels
This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping
over unwantedchannels. Beforeselecting channels,they mustbe
programmedinto the TV/DVD's memory.To use this TV/DVDwith an antenna,
set the SignalType option to the Air mode. When shipped from the factory,this
menu option is in the Cable mode.

Air/Cable selection

Automatic search

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Channel", then press • or ENTER.

MENU
SETUP

Presspress
• or •• to
then
or select
ENTER."Auto Ch Memory",

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Channel", then press • or ENTER.

Presspress
• or • to
then
or select
ENTER."Auto Ch Memory",

Press • or • to select "Signal Type".

Presspress
• or • to
then
or select
ENTER."Automatic

Search",

Press • or • to select "Air" or "Cable".

The TV/DVD
will begin
memorizing
all the
channels
available
in your
area.

Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

J51TO101E!.i_o22
4_F-r

6/22/09

4:29:02

You can select the channel that you want to skip.

if)
¢')

Press
in the TV
mode.The
menu
screenMENU
will appear.
Press
• or • TV
to select
"Channel", then press • or ENTER.

Pressto• skip.
or • to select the channel that you
want
€-

SETUP

Press • or function
• to select
whichever
you"Add"
want or
to "Delete",
perform.
Press • or
or ENTER.
• to select"Add/Delete",
press

Press • or
or ENTER.
• to select"Add/Delete",
press

then

6
7

Repeat steps 4 - 5 for other channels you
want to add or delete.
Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

23
6/22/091
J51T0101D.indb

4_llr•r

4:29:04

memorize channels (Continued)

ENTER
A/V/I_
EXIT/CANCEL
MENU
%

rAdding
C,anne

IfC ea,A"

If you find a new channel unregistered, you can add the
new channel into the channel memory.

1
2

All channels are deleted from the channel memory,

Tune in the new channel.
Press MENU
in the Press
TV mode.
TVselect
menu
screen
will appear.
• orThe
• to
"Channel", then press • or ENTER.
Press MENU. The TV menu screen will appear,
Press • or • to select "Channel", then press
• or ENTER.

MENU
SETUP

Press • or
or ENTER.
• to select"Add/Delete",
press

Press • or
press
or ENTER.
• to select"Add/Delete",

then

•Press
or ENTER.
• or • to select "Clear All", then press

then
Presspress
• or _
• to
or select"Adding
ENTER. The new
Channel",
channel will
be added into the channel memory.

Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

Press EXIT/CANCEL to return to the normal
screen.

EXIT/
CANCEL

J51T0101[.indb

6/22/09

4:29:05 PM

iii_'_'C 0 _

POWER
0-9

,,i

j -

VOL +/CHA/V

To turn on the TV/DVD, press POWER.
(POWER indicator on the front of the unit changes
blue. It may take approx. 10 seconds for a picture
to appear on screen.)

TO SELECT
1-9:
10-99:
100-125:

Adjust the volume level by pressing VOL + or -.
The volume level will be indicated on the screen

ANALOG

Press
select
Press
select
Press
select

TO SELECT

CHANNELS

1-9 as needed. Example, to
channel 2, press 2.
the 2 digits in order. Example, to
channel 12, press 1,2.
the 3 digits in order. Example, to
channel 120, press 1,2, 0.

DIGITAL

--I
O
"O

CHANNELS

Press the first 3 digits, then press the - button,
followed by the remaining number.
Example, to select channel 015-001, press 0, 1,
5, -, 0, 0, 1,
• If a channel is selected with only audio content,
"Audio only" will be displayed on the screen.
• If a channel is selected with a weak digital
signal, "Digital channel signal strength is low"
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.

by orange bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of orange bars also decreases.

Set the Signal
position
(see "Air/Cable
Type option
selection"
to the appropriate
[_).

• If a channel is selected to which you have not
subscribed, "Digital channel is encrypted" will
be displayed on the screen.

VHF/UHF/CABLE CHANNELS
buttons
Press the orDirect
CH ^ Channel
/ V to select
Selection
the channel.
(0-9, -)
(If you press only channel number, channel
selection will be delayed for a few seconds.)

Air

Cable

VHF
2-13
UHF
14-69

VHF
2-13

CD (Z) G)
(Z) CD CD

STD/HRC/IRC
14-36
37-59
60-85
86-94
95-99
100-125
01

(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1 )
(100) (125)
(5A)

Note:
• If a channel

with no broadcast

is selected,

the sound

will automatically be muted.
• It may take a few seconds for a digital channel picture
to appear on screen after being selected.

25
6/22/091
J51T0101D.indb

4_lr•r

4:29:07

0 0 ® _:_

ope anon (Continued)

:'= :

o "_

SLEEP

DISPLAY

VOL +/-

CH RTN

• DISPLAY
Press DISPLAY
screen.

to display the current information

on the

• SLEEP
To set the TV/DVD
turn off
amount
SLEEP
control.

DISPLAY

CD
When the TV/DVD
receives a digital signal,
the digital information
will appear.
• Channel number

• Station name

•
•
•
•
•

•
•
•
•

Channel label (if preset)
V-Chip rating
Sleep timer
Program guide
Resolution

Broadcast program name
Signal type
Audio language
Picture size

sl==p Timer

after a preset
of time, press
on the remote
The clock will

count up 10 minutes for
each press of the SLEEP button (Off, Oh 10m, Oh 20m,
.... 2h 0m). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to Off.

• HEAD PHONES
Insert a stereo headphones (not supplied) with a 1/8" mini
plug into the HEAD PHONE jack on the rear panel.
If you connect headphones, the sound from TV/DVD
speakers is muted.

When the TV/DVD
receives a analog signal,
the analog information
will appear.
•
•
•
•

Channel number
V-Chip rating
Sleep timer
Picture size

Press

DISPLAY

• Channel label (if preset)
• Signaltype
• Audio information (Stereo or SAP)
• Resolution

again to clear the call display.

Note:
• After a few seconds,
normal TV-operation

DISPLAY screen will return to
automatically.

• OH RTN
This button allows you to go back to the last channel
selected by pressing OH RTN. Press CH RTN again to
return to the last channel you were watching.
OHRTN
SKiP

• MUTE
Press MUTE to switch off the sound. The TV/DVD's
sound will be silenced and "Mute" will appear on the
screen. The sound can be switched back on by pressing
this button again or the VOL + or -.
MUTE

26
6/22/09

4:29:08

....... ,,_ .............i!lI

bering"channels

r C

,._ iiii

Channel label appear with the channel number display each time you turn on the
TV/DVD, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
•_

/ / t} i_
ENTER

• /V/< / •
EXIT/CANCEL
..............
MENU

Press MENU in the TV mode. The TV menu

Press
• orappears
• repeatedly
untilspace.
the character
you
want
in the first

screen will appear. Press • or • to select
"Channel"
menu, then press • or ENTER,
MENU

SETUP

--I

-t

The characters

F> 0 • ..9

Press
or •ENTER.
to select"Ch
Label",
press •• or
The "Oh Label" menu will appear.

then

rotation as follows:

<-->A..-Z
....
> SPACE

If the character
ENTER.

O@/+=-q
<

which you desire appears,

press

Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.

When
you finish inputting
the to
label
press EXIT/CANCEL
to return
the name,
normal
screen.
Press then
• or press
• to select
a channel you want to
label,
•.
EXIT/
CANCEL

Repeat asteps
for other
channel.You
assign
label 3-5
to each
channel.

can

To clear a Oh Label
After step 3 above, press • or • to select "Label Clear",
then press • or ENTER.
Note:
• The channel

labels will be reset after "Automatic

Search" [_.

27
6/22/091
J51T0101D.indb

4:29:09
_J

beling video inputs
TheVideo Labelfeatureallowsyou to label eachinputsource foryourTV/DVD.

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Setup", then press • or ENTER,

Press • or • to select the desired label for
that input source.

MENU
SETUP

VCR
DVD
DTV
SAT
CBL

Press
• to select "Video Label", then
press •• or
or ENTER.

: Uses the default label name
:Video cassette recorder
: DVD video
: Digital TV set-top box
: Satellite box
: Cable box

Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

Pressto• label.
or • to select an input which you
want

J51T0101E!.i_o88
4_F•r

6/22/09

4:29:10

An age limitation can be set to restrict children from viewing or hearing
violent scenes or pictures that you may choose to exclude. The restriction
applies to "TV Rating"and "Movie Rating" if this data is transmitted. You may
set this restriction separately. To use the V-Chipfunction, you must register
a password.
Notes:
If you forget the password, press DISPLAY four times within
five seconds while the TV is in password entering mode. This
allows you to reset your password.

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Lock", then press • or ENTER.
MENU
SETUP

Select and enter your password (4 digits)
using Number buttons (0-9), then press
ENTER.

ENTER

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Lock", then press • or ENTER.
MENU
SETUP

-t

0
"0
(1)

Press
• or •• to
Password",
then press
or select"Change
ENTER.
The Change Password screen will appear.

QQQ
CD (Z) (Z)
(D

@
Enter press
the same
password again to confirm,
then
ENTER.
The password is now registered.

_ GD (Z)
(Z) (Z) (X)
(3D

G
Note:
• The V-Chip feature is available only for the U.S. V-Chip
system. The Canadian V-Chip system is not supported.

Enter then
a newpress
password
using Number buttons
(0-9),
ENTER.

QQQ
(Z)Q GD
CD (D (Z)
(3D

@
Enter the same password again to confirm,
then press ENTER.
The new password is now registered.

29
6/22/0J
J51T0101D.indb

4:29:12

;_!iiiii
_

•

mng

the V-Chip (Continued)

C_
0-9

0 ii_i
( _

{::!::C:) ::::::_

Press MENU
screen
"Lock",

M EN U

in the TV mode. The TV menu

Press
or •ENTER.
to select"V-Chip Set", then
press •• or
The V-Chip Set Menu appears.

will appear. Press • or • to select
then press • or ENTER.

SETUP

Press then
• or press
• to select
which rating
be
used,
• or ENTER.
Each will
rating
below will appear.

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will
appear,

QQQ
CDGDG_
(3D_ (D
(2)

Q
•Press
or • •toorselect
• to select
"On".

TV Rating

"V-Chip",

then press

You can set the rating using age level and genre.

J51T0101

Age:
TV-Y

:All children

TV-Y7
TV-G

: 7 years old and above
: General audience

TV-PG
TV-14
TV-MA
Genre:
ALL
D
L
S
V
FV

: Parental guidance
: 14 years old and above
: 17 years old and above
: All
: Dialogue
: Language
: Sex
: Violence
: Fantasy Violence

[! i_oOo
6/22/09
J

4:29:13

..................
ENTER

,j
,':>__

• /•
EXIT/CANCEL

Movie Rating

--I
O

G
PG
PG-13
R
NC-17
X

: All ages
Parental guidance
Parental guidance less than 13 years old
Under 17 years old parental guidance
suggested
17 years old and above
: Adult only

Press ENTER,
• or • to select the desired rating, then
press

@
Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

To use the TV/DVD after it is protected,
When a program is received that is blocked by the VChip, press MUTE, then enter your password.
The protection will be temporarily overridden. If the TV/
DVD is turned off or the channel is changed, the V-Chip
restriction will be reactivated.
Note:
• The V-Chip function is activated only on programs
input sources that include a rating signal.

and

31
6/22/091
J51T0101D.indb

4_F?

4:29:15

be able to download an additional
available in the future.

rating system, if such a system becomes
O

E.TER

(O_::.....................
•/v/_,
o_
................
M E NU

Press MENU in the TV mode. The TV menu
screen
"Lock",

will appear.
then press

Press • or • to select
• or ENTER,

MENU
SETUP

procedure

to update

J
|

Note:

rating information.
_ou also need "Update"

• You can only download the additional V-Chip rating
system when your TV/DVD is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV/DVD.
• The standard V-Chip rating system is available
whether your TV/DVD is receiving a digital signal or
not, and will block both analog and digital programs.
To set the restriction level using the standard V-Chip
rating system, select "V-Chip Set" in step 3.
• The downloadable
V-Chip rating system is an evolving
technology, and availability, content, and format may

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will
appear.

(Z)Q(D
(3D GD GD
(Z) (3D(Z)
(]D

vary.
• You cannot select this feature

if the TV/DVD

receiving a digital signal for the current

is not

station.

G
Presspress
• or •• or
to select
then
ENTER."V-Chip Set (DTV)",

If
the TV/DVD
notTV/DVD
storing will
the begin
additional
rating
system,isthe
downloading it, which may take some time to be
completed.

Set your preferred content
additional rating system.

rating limits for the
J

J51TO101E!.i_o22
6/22/09

4:29:15

j c::, :::::,,:::::
,
This television has the capability to decode and display closed captioned
television programs. Closed captioning will display text on the screen for
hearing impaired viewers or it will translate and display text in another
language.

{:i__:Lii_

ENTER

.................
¢'_

_
':::J<_ _

Setting the closed

EXIT/CANCEL
................
M E NU
CLOSED
CAPTION

captions

Press MENU
theTVpress
mode.
Press
• or • to
select
"Setup",in then
• or
ENTER.

Press • or • to select "Analog
Caption" or
"Digital Caption", then press < or • to select
the desired

MENU
SETUP

Closed

Caption

mode.
--I

When you select "Analog Caption", you can
choose C1, C2, C3, C4, T1, T2, T3 and T4.

O
"O

When you select "Digital Caption", you can
choose from CSl, CS2, CS3, CS4, CS5 and CS6.
-.1

Presspress
• or •• to
then
or select
ENTER."Closed Caption",
The Closed Caption menu will appear.

Press
or •• to
"CC Priority",
press •< or
to select
select "Digital
CC" or then
"Analog
CC".

Press <• or
or •• to
to select
select "On",
"CC Setting", then
press
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.

Note:
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two kind
of captions are overlapping.

Press EXIT/CANCEL
screen.

to return to the normal

EXIT/
CANCEL

Note:

• You can also display the Closed Caption menu screen by pressing CLOSED CAPTION on the remote control.
• Digital caption feature is not available for analog channel.

If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set
I "CC
mportant
Note:
Setting"
to "Off".

33
6/22/091

J51TO101D.indb 33

'_¶_rj_

4:29:16

advanced
hen you haveselected Custom as the display method, you can adjustthe
various setting listed below as follows:
This feature is designed to customize

Digital Captions only.

Press MENU
mode.
Press
• or • to
select
"Setup",in theTV
then press
• or
ENTER.

Presspress
• or •• to
the desired
item,
then
or select
_ to change
the setting.

MENU
SETUP

You can select from among the following items
and parameters.
Presspress
• or •• or
to select
then
ENTER."Closed Caption",
The Closed Caption menu will appear.

Text Size:
Text Type:
Text Edge:

Auto, Small, Standard, Large
Auto, Style1, Style2, Style&
Style4, Style& Style6, Style7
Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow

Text Color:

Press
• or •• to
"Digital"Custom".
CC Preset",
then press
or select
_ to select

Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Solid, Transparent,
Translucent, Flashing
Background Auto, Black, White, Red, Green,
Color:
Blue, Yellow, Magenta, Cyan
Background Auto, Solid, Transparent,
Opacity:
Translucent, Flashing

Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

Press
or ENTER.
• to select "CC Advanced", then
press •• or
The CC Advanced menu will appear.

Note:
• You cannnot select"CC Advanced" in the menu
before set "Digital CC preset" to "Custom".
• You cannot set the Closed Caption "Text Color" and
"Background Color" as the same color.

6/22/09

4:29:18

. •

c o ,_0

ustmg the picture preference/

o c:: c::

Picture settings

Z}:

You can select four picture modes--Sports,
as described in the following table:

c::::>
_-_4:::>
j

Standard, Movie and Memory--

0 ;" ¢"t ,:':,;
J

.....
ENTER

Picture settings are factory preset but you can adjust them individually as
follows:

• / T/,q / •

EXIT/CANCEL
..............
MENU

:!,:t __

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Picture",
then press • or ENTER.
MENU
SETUP

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Picture", then press • or ENTER.
Press • or • to select "Picture Setting", then
press • or ENTER.
The Picture Setting menu will appear.

'-4
O
"O

",t

Press • or • to select "Picture Preference".

Press
or • to
select
itemthe
yousetting.
want to
adjust.• Press
• or
• tothe
adjust

Press
adjust. • or • to select

a mode you want to

Mode

Picture Quality

Sports

Bright and dynamic picture (factory-set)

Standard

Movie

Movie-like

Memory

Your personal preferences
you; see "Picture settings"

picture quality (factory-set)
picture setting (factory-set)
(set by
at right).

Brightness

decrease

increase

Contrast

brightness
decrease
contrast

brightness
increase
contrast

Sharpness

makes picture
softer

makes picture
clearer

Color
Tint

be pale color

be brilliant color

be reddish

be greenish
color

color

Color Temperature
Cool

Picture Quality
Bluish

Standard

Neutral

Warm

Reddish

After yourtodesired
setting,
press screen.
EXIT/
CANCEL
return to
the normal

After your desired setting, press EXIT/
CANCEL to return to the normal screen.

Note:
• The Contrast default setting is set to maximum
factory.

at the

35
6/22/091
J51T0101D.indb

4:29:19
_/

0-4
Wide1, Theater Wide2, Theater Wide3 and Full.

MENU
ENTER
A/V/),
EXIT/CANCEL
PIC SIZE

1
2

Theater Wide2
programs)

Press MENU. Press • or • to select "Picture",
then press • or ENTER.

picture size (for letter

box

The entire picture is uniformly enlarged--it
is stretched
the same amount both wider and taller (retains its
original proportion).

Press • or • to select "Picture
Size", then
press • or ENTER to display Picture Size
menu. Press A/• or corresponding
Number
button (0-4) to select the desired
picture size,
as described
below.

The top and bottom edges of the picture may be hidden.

Theater Wide3 picture size for letter box programs
with subtitles)
To fill the width of the screen, it is extended horizontally.
However; it is only slightly extended at the top and the
bottom.
Note:

The top and bottom edges of the picture may be hidden.

• Selectable picture sizes may vary depending on the
input source or broadcast signal.
• Picture Size menu also can be displayed by pressing
PIC SIZE on the remote control.

Press EXIT/CANCEL to return to the normal
screen.
Full picture size (for 16:9 source programs)
Full will display the picture at the maximum size.

Natural picture size
In some cases, this image will display the size of
standard 4:3 with a black side bar.

O
Note:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In 720p or 1080i signal, only the Theater Wide2 and
Full picture size features are available.

Theater Wide1 picture size (for 4:3 format
programs)
To fill the screen, the right and left edges are extended,
however; the center of the picture remains near its
former ratio.
The top and bottom edges of the picture may be hidden.

J51T0101E!.i_o66
6/22/09
J

4:29:21

Mode/DNR

c o ,_0

A smoother motion may be obtained by setting the Film Mode to "On" when
you view a DVD.

o c:: c::

Z}:
:}
c::::>
_-_4:::>j
0 ;" ¢"t':':,;

DNR (Digital Noise Reduction) can reduce the roughness of the picture.
(This function is available only for analog broadcast.)

ENTER

:
:!,:t__

.....

• / T/,I / •

EXIT/CANCEL
..............
MENU

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Picture", then press • or ENTER.

MENU"Picture",
in the TVthen
mode.Then
• or
•Press
to select
press • press
or ENTER.
MENU
SETUP

MENU
SETUP

,-,I
O
11)

Press • or • to select "Film Mode".

Press < or • to select "On" or "Off".

Press • or • to select "DNR".

Press < or • to select "On" or "Off".

Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL

Note:
• A smoother motion may be obtained by setting the Film
Mode to "On" when you view a DVD from the DVD player
connected with ColorStream
(component video) inputs.

37
6/22/091
J51TO101D.indb

4:29:22
_/

control adjustment/
_::_C::::I:!_
CII:_lii

Selecting Stereo/Second Audio Program (SAP)
DISPLAY

The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound.
MTS also can transmit a second audio program (SAP) containing a second
language or other audio information.
When the TV/DVD receives a stereo or SAP broadcast, the word "Stereo" or

ENTER
•/V/4/1_

"SAP" displays on-screen every time you press DISPLAY.

EXIT/CANCEL
MENU

Selecting

Stereo/Second

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Audio",
then press • or ENTER.

Press MENU
theTVpress
mode.
Press
• or • to
select
"Audio",in then
• or
ENTER.

MENU
SETUP

Press •Then
or • press
to select
item
you each
want to
adjust.
• orthe
• to
adjust
setting.

Bass:

Press • or • to adjust the bass sound.

Treble:

Press • or • to adjust the treble
sound.

Balance:

• or "Stereo".
• to select "MTS", then press • or
•Press
to select

Press EXIT/CANCEL
screen.

to return to the normal

EXIT/
CANCEL

Press • or • to obtain an equal sound
level from both speakers.
Note:

After
yourtodesired
setting,
press EXIT/CANCEL
to
return
the normal
screen.
EXIT/
CANCEL

• Generally you can leave yourTV in stereo mode
because the TV automatically
outputs the type of
sound being broadcast (stereo or mono).
• If the stereo sound is noisy, select "Mono" to reduce
the noise.
To listen to a second audio program (SAP)
Press • or • to select "SAP" in step 2 above.The TV
speakers will output the second audio program instead
of normal audio.

J51T0101EJ.i_o88
4_F•r

6/22/09

4:29:23

lec#ng

the audio language/

0-6

Using the aspectfeature
When two or moreaudiolanguages are included in a digital signal, you can
select one of the audio language. (This function is available only for digital
broadcast.)
When the Aspect feature is set to On and the TV receives a 480i signal, the
picture size is automatically selected (as described in the following table).

ENTER
• / V/_ / •
EXIT/CANCEL
MENU

Press
MENU"Audio",
in the TV
mode.
Then
press
• or
• to select
then
press
• or
ENTER.

Press
in the TV
mode.The
TVselect
menu
screenMENU
will appear.
Press
• or • to
"Setup", then press • or ENTER,

MENU
SETUP

Presspress
• or •• to
Language",
then
or select
ENTER"Audio
to display
the Audio
Language menu.

--I

<
O

Press • or • to select
select"Aspect".
"On" or "Off".

After
to
return
yourtodesired
the normal
setting,
screen.
press EXIT/CANCEL
Pressdesired
A/• or language.
Number buttons (0-6) to select
your

EXIT/
CANCEL

Cz>

CD (3D (Z)
(Z) GD (Z)
(3D

After
yourtodesired
setting,
press EXIT/CANCEL
to
return
the normal
screen.

Aspect ratio of signal
source

Automatic aspect size
(When Aspect is On)

4:3 Normal

Natural

16:9 Full

Full

4:3 Letter box

Theater Wide2

Not defined

User-set mode

EXIT/
CANCEL

39
6/22/0J
J51T0101D.indb

4:29:25
J

_t#ng

the POWER indicator/

Adjusting the back lighting
When the Standby LED is set to On, the POWER indicator on the front of
the unit will change from blue to red in standby mode.tf you set to Off, the
POWERindicator will not light up in standby mode for power saving.
The Backlight feature adjusts the screen brightness for improved picture
clarity.

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Setup", then press • or ENTER.
MENU

SETUP

ENTER
•/V/_l/1_
EXIT/CANCEL
MENU

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Picture", then press • or ENTER.

Press • or • to select "Picture Setting", then
press • or ENTER.
The Picture Setting menu will appear.

Press • or • to select"Standby
LED".
select "On" or "Off".

Press • or • to select "Backlight".

After
yourtodesired
setting,
press EXIT/CANCEL
to
return
the normal
screen.
EXIT/
CANCEL

Press • or • to adjust the setting.

to
After
return
yourtodesired
the normal
setting,
screen.
press EXIT/CANCEL
EXIT/
CANCEL

J51T0101[!.i_oO0
4_lrr

6/22/09

4:29:26

If the Auto Shut Off feature is On, a station being viewed stops broadcasting
and the TV is not operated, the TV will automatically shut itself off after 15
minutes.
The Reset function returns your settings to the factory settings.

Setting t heAu to Shut Off

Press MENU in the TV mode. The TV menu
screen will appear. Press • or • to select
"Setup",
then press • or ENTER.

SETUP

--I
O

Press • or • to select
select"Auto
"On" orShut
"Off".
Off".

Press • or • to select "Reset".

Press • or ENTER to return your settings
the factory settings.

After
yourtodesired
setting,
press EXIT/CANCEL
to
return
the normal
screen.
EXIT/
CANCEL

"Reset"
appear
on theto screen
approx. 3
seconds, will
then
it returns
the normal
Note:
• The Reset function returns your adjustments
following factory settings:
Picture Setting
Brightness ...... center (25)
Contrast ............ max (50)
Sharpness ...... center (25)
Color .............. center (25)
Tint ................... center (0)
Color Temperature... Cool
Picture Preference.... Sports
Film Mode ....................... On

J51T0101D.indb

4_F•r

to the

Bass ................... center (15)
Treble ................ center (15)
Balance ................ center (0)

4:29:27

...... :.............
TV/DVD
@ .......
.....
...............
POWER

a disc
PLAY

This section shows you the basics on how
to play a disc.

STOP

VOLUME +/-

POWER
CAUTION

VOL +/ENTER

Keep your fingers well clear of the disc slot when
disc is loading or unloading. Neglecting to do so
may cause serious personal injury.

EC_6JE i

A/'V/d_
icons on the heading bar show the playable discs for the
function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
: You can use this function with Audio CDs and CD-R/RW CDs.

PAUSE
PLAY

To remove

•

the disc

Press EJECT.
Remove
out.

To resume normal playback,
press PLAY.
The sound is muted during still
mode.

•

To pause playback (still mode)
Press PAUSE during playback.

the disc after the disc comes

--_ EJECT

13)
O')

To stop playback
Press STOP.

O"
¢3

STOP

Note:
• If a non-compatible
•
•
•
•
•

•
•
•
•

•

disc is loaded, "Incorrect

Disc", "Region Code Error" or "Parental Error" will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again [_ [_.
Some discs may take a minute or so to start playback.
When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for a few
minutes and then "Incorrect Disc" will continue to be displayed.
Some discs may not work the resuming facility.
Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC _.
Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
Do not move the unit during playback. Doing so may damage the disc.
Use the EJECT to unload and eject the disc.
Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on the remote control once the movie is completed.
There may be a slight delay between the button is pressed and the function activates.

43
6/22/0J
J51T0101D.indb 43

'_¶_rj_

4:29:32

a disc (Continued)

P!ayisg

in fast reverse or fast forward directions

Press REV or FF during

• To resume normal
Press PLAY.

playback.

!
playback

PLAY

REV

_F
(_D

REV: Fast reverse playback
FF: Fast forward playback
Note:

Each time you press REV or FF
button, the playback speed changes.

• The TV/DVD mutes sound during reverse and forward scan
of DVD/VCD/Audio CD discs.
• The playback speed may differ depending on the disc.

Press PAUSE during
PAUSE

•

still playback,

To resume normal
Press PLAY.

Each time you press PAUSE, the
picture advances

playback

PLAY

one frame.
Note:
• The sound is muted during frame by frame playback.

Press SLOW
during

,ql (REVERSE)

•

or I_- (FORWARD)

playback.

To resume normal
Press PLAY.

playback

PLAY

Each time you press the button, the
slow-motion speed changes.

Note:
• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.

Press SKIP I<1_1or m_,-I repeatedly

to display

the chapter

or track number

you want.

Playback starts from the selected chapter or track.
CLOSED
OAP110N
SKIP

CH RTN
SKIP

To locate succeeding

chapters or tracks.

Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.

Note:
• A "Prohibition" symbol "X" may appear at the upper right of the screen. This symbol means either the feature you tried is not
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the
TV/DVD.

J51T0101[!.i_o44

_k'h
/

6/22/09

4:29:33

•

.......................

•

ommg/Loca#ng desired scene

This unit will allow you to zoom in on the frame image. You can then make
selections by switching the position of the frame.
' _J*_'",", /
i
® !
¢

0-9
JUMP
DISPLAY
ZOOM

Use the title, chapter and time recorded on the DVD disc to locate the
desired point to playback. In the case of VCD/Audio CD discs, time and
track are used to locate the desired point to playback.
To check the title/track, chapter/track and time, press DISPLAY.

• / v/4 / •

ENTER
EXIT/CANCEL

Press ZOOM during playback.
INPUT
ZOOM

Press JUMP during playback or stop mode.

The center part of the image will be
zoomed in.
Each press of ZOOM will change
the ZOOM O,1 (x 1.3), 0`2 (x 1.5)
and 0`3 (x 2.0).

JUMP

Title

---

Chapter Jump
T ime

]

---:-"!

Press
or • to select the "Title/Track", "Chapter"
or•"Time".
Jump
Title

---

Chapter
T im e

Press A/V/,/I_
frame.

--':' -:-

I
<
=3
o
11)
t..,,
"o

to view a different part of the

You may move the frame from
the center position to UP,DOWN,
LEFT or RIGHT direction.

Press Number buttons (0-9) to input the number.

,.<
0"
o

Title
(_QQ

[
[

GD (D CD

Chapter

Time

---

Jump

,:,-?

(D
• If you input a wrong number, press

In the to
zoom
mode,
press
ZOOM repeatedly to
return
a 1:1
view (0`
Off).

EXIT/CANCEL
• Refer to the package supplied with
the disc to check the numbers.

INPUT
ZOOM

Note:

Press ENTER.

Playback

starts.

You can select the Pause, Slow or Search playback in the
zoom mode.

• When
playback
youstarts
change
fromtheChapter
title,
the selected title.

Some discs may not respond to zoom feature.

• Some discs may not work in the
above operation.

1 of

Note:
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. To turn off PBC, see page [_.

45
6/22/091
J51T0101D.indb

4_lrr

4:29:34

rking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.

c::,_

Marking the scenes

Press MARKER during playback.

Returning

MARKER

to the scenes

Press MARKER during playback or stop mode.

MARKER

Selectpress
the blank
Marker
using
or V. scene.
Then
ENTER
to mark
the •desired

Cz>

Press • or • to select the Marker 1-3.

• Repeat this procedure to mark the
other 2 scenes.

<:z:>
Press ENTER.
Press MARKER to clear the display.
MARKER

scene.
Playback starts from the marked

Note:
• To cancel the Marker
• Some discs may not work with the marking operation.
Followthe above steps 1~2, then press EXIT/CANCEL.
• The marking is cancelled when you eject the disc or turn the
power off.
• Some subtitles recorded around the marker may fail to
appear.
• In case of Video CD with PBC, Marker function is prohibited.

J51T0101E!.i_o66
4_lrr

6/22/09

4:29:35

eatplayback/A-B Repeat playback

Press PLAY MODE during playback or stop
mode,

A-B repeat playback allows you to repeat a section between
two selected points.
Press REPEAT A-B during playback,

PLAY MODE

REP_ATA-R The start point is selected.

[DVD]
Press ENTER repeatedly to select "Chapter"
or "Title".
The unit automatically starts
G

the
repeat
current
playback
title or
after
chapter.
finishing

Press REPEAT A-B again,
<
REPEAT A-B

[Video CD]
Press • to select "Repeat",
Press ENTER repeatedly to select "Track" or
"All".

The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point and
returns to Point A automatically, then
starts again.

Press PLAY MODE again to clear the screen.

R_PEATA-B

,,tin
I==nl

Off" appears

on the screen.

Note:
In A-B Repeat mode, subtitles near the A or B locations
may not be displayed.
You cannot set the A-B Repeat for the scenes that include
multiple angles.
A-B Repeat playback does not work when Repeat playback
is activated.

Note:
• Some discs may not workwith the repeat operation.
• In case of Video CD with PBC, Repeat function is
prohibited during playback.
• Chapter/Track repeat function is canceled whenever SKIP
or _ is pressed.

,.<

• To resume normal playback
Press REPEAT A-B again.

• To resume normal playback
Select Repeat • "Off" in step 2.

J51T0101D.indb

e.,,

I!I!H!I!I!H!I!I!H
i,,ii,i,iii
iiil

The unit automatically starts
repeat playback after finishing
the current track.

• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.

1:3
o

You may not be able to set A-B Repeat during certain
scenes of the DVD.
A-B Repeat does not work with an interactive
MP3/WMA/JPEG CD.

DVD and

In case of Video CD with PBC, A-B Repeat is prohibited.

4_lrr

6/22/0

4:29:37

o ram playback/Random playback
o

You can arrange the playback order of tracks on the disc. And the
unit can also select tracks at random and playback them. These
features work for Video CD.

/"_ (:
..............
PLAY MODE

For Audio CD and MP3/WMA CD, please see "Random playback
(Audio CD/MP3/WMA/JPEG)"
[_ and "Program playback (Audio
CD/MP3/WMA/JPEG)"
[_.

ENTER
• /V/_
/ •
EXIT/CANCEL

,:::;
....

................
_..........
PLAY

Press <1/• to return to the left column, then
press • / • to select the "Program Playback"
and press ENTER,

Press PLAY MODE in the stop mode,
PLAY MODE

The programsyou selectedwill startto playbackinorder.
• To resume normal playback,
select Mode: "Off" in step 2.

Press
or • to select
"Mode",
then press
ENTER • repeatedly
to select
"Program",

<:z>

<:z>
•
4/•
Press •/•

toand
select
position,
then the
useprogramming
Number buttons
(0-9)

to input the track,

If you input a wrong number, press
EXIT/CANCEL
• To program others, repeat this step.

C__)

(Z) (Z) (Z)

• To clear the program one by one
Select Mode to "Program", press • / •/4 / • to select the
track number. Then press EXIT/CANCEL.
• To clear all the programs
At the left column, press •/•
to select "Clear Program".
Then press ENTER.
Note:
• In playing back the Video CD with PBC, you cannot set
Program playback.
• The program is canceled when you eject the disc or turn the
power off.

To change the program
1. Select Mode to "Program" (as step 2), press • / •/_ / •
to select the track number you want to change, then
press EXIT/CANCEL.
2. Press Number buttons (0-9) to input the new track
number.

Press PLAY MODE during playback or stop
mode,

Press PLAY.
PLAY

PLAY MODE

The Random

Playback

will start.

• If you set "Random" during playback mode,
Random playback will begin after the track that is
Press •/•repeatedly
to select
"Mode", "Random",
then press
ENTER
to select

currently being played has ended.
• To resume normal playback,
select Mode: "Off" in step 2.

<:z:>

Note:
• In case of Video CD with PBC, you cannot set Random
function during playback.

<:z:>
J51T0101

• The random playback is canceled when you eject the disc or
turn the power off.

[!.,_o86
4_lrr

6/22/09

4:29:38

angmg angles/Title selection/
D VD menu
:: _
......

PLAY

j ........

TOP MENU

When playing back a disc recorded with multi-angle facility, ,ou can change the angle that you are viewing the scene from.
Press ANGLE during playback.

Press ANGLE repeatedly until the desired anc
is selected,

The current angle will appear.
ANGLE

ANGLE

CD
Note:
• Depending on the DVD, you may not be able to change the
angle even if multi-angles are recorded on the DVD.

Title selection

Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
Press TOP MENU during playback.
Title menu appears on the screen.
TOP MENU

Press • IV/,

/ I_ to select the desired title.

Q.
"0

Press ENTER or PLAY.

The playback of the selected title will
start.

PLAY

Note:
• Depending on the DVD, you may not be able to select the title.
• Depending on the DVD, a "title menu" may simply be called a
"menu" or "title" in the instructions supplied with the disc.

Some DVDs allow you to select the disc contents using the menu.
When you playback these DVDs, you can select the subtitle language, soundtrack language, etc, using the menu.
Press ENTER.

Press DVD MENU during playback,
ovoMENU

The DVD menu appears on the TV

screen.
• Press DVD MENU again to resume
playback at the scene when you
pressed DVD MENU.

The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.

Note:

Press •/V/_I/II_

to select the desired item.

• Depending on the DVD, you may not be able to resume
playback from the scene point when you press DVD MENU.

49
6/22/0J
J51T0101D.indb

4:29:39

(lid C_ (_I_D
}ii

anging

soundtrack language/Subtitles

:::'

_;_.A;

CD CD

AUDIO SELECT
SUBTITLE

C:D

!_Subtitles

You can select the language when you play a multilingual disc. When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.

ress AUDIO SELECT during playback,
AUDIOSELECT

PressSUBTITLErepeatedlyduring
the
desired language is selected. playbackuntil

SUBTiTlE

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

i______________________________________________

To
off the subtitle, press SUBTITLE until
"Off"turn
appears.
Press AUDIO
SELECT
repeatedly until the
desired
language
is selected,

SUBTITLE

AUDIOSELECT

• The on screen display will disappear after a few
seconds.
•

In case of Video CD playback

Audio type changes as follows each time you press AUDIO
SELECT.

The on screen display will disappear after a
few seconds.
Note:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when
you loaded or eject the disc.
• In some cases, a selected subtitle language may not
be changed immediately.

Note:

• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• The selected soundtrack language is cancelled when
you eject the disc. The initial default language or
available language will be heard if the disc is played
back again.
• If you select DTS in playing DTS-encoded disc, no
sound will be heard from the TV/DVD's speakers.

J51T0101

E!.i_oOo
4_llr•r

6/22/09

4:29:40

_?ii

_,,_ ,

o <>0

status/To turn off the PBC

(Yb CD <7)
()C:)

@ To turn off the PBC {see[Z})
ili;;:;
ii_il¸;;%;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;!_;
!_;
!_;
!_;
!_;
!_;
!_i¸iiii

With press of DISPLAY, the status of the disc
will appear on the screen.
To cancel the display, press DISPLAY again.

Press
PLAY MODE in the stop mode.
MODE

PLAY

DISPLAY

CD
Press &IV
ENTER
repeatedly
to select
until
"Mode",
"Off" appear.
then press
DVD
DISC OPERATION

ELAPSED
TIME

TOTAL
TIME

TITLE
CHAPTER
NO.
<

ANGLE NO.

SUBTITLE

AUDIO LANGUAGE

Press
MODEPLAY MODE again to clear the screen.

PLAY

LANGUAGE

A KIND OF AUDIO

1:3
o
11)
t,-,,

,.<

• To turn on the PBC

Follow the above steps 1~2, then press ENTER repeatedly
until "PBC" appear.

Video CD
DISC OPERATION

ELAPSED
TIME

TOTAL
TIME

TRACK NO.

51
6/22/0J
J51T0101D.indb

4:29:41
_/

G andAudio CD operation
This unit can playback the MP3/WMA/JPEG-data
which has been recorded on CD-R or CD-RW. To produce the MP3/
WMA/JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding
Software (not supplied).
The Apple-HFS-System cannot be played.
This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all recordable
discs will produce optimal playback quality. The technical criteria set forth in this owner's manual are meant only as a
guide. Use of CD-RW for MP3 files is not recommended.
You must obtain any required permission from copyright owners to download or use copyrighted content.
Toshiba cannot and does not grant such permission.

Limitations
on MP3/WMA/JPEG CD playback
MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters,
".mp3", ".wma", ".jpg".
MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
This unit can read 2000 files per disc. If one disc has more than 2000 files, it reads up to 2000 files, the remaining files
will be omitted.
MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
Music recorded by "Joliet Recording Specification" can be played back, the file name is displayed (within 15 letters) on
the screen. Long file names will be condensed.
The music files recorded by "Hierarchical File System" (HFS) cannot be played.
Limitations
on display
The maximum number for display is 15 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG
To
1.
2.
3.

files

playback MP3ANMA/JPEG CD in the recorded order,
Use MP3/WMA/JPEG software that records data alphabetically or numerically.
Name each file including two-digit or three-digit number (ex. "01" "02" or "001" "002").
Refrain from making too many sub-folders.

CAUTION:
Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard, sampling frequency and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1 kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1 kHz of sampling frequency and 128kbps of constant
bit rate.
WMA CD
WMA version 7 and 8
32kHz/48kbps, 44.1 kHz/48kbps~192kbps,
48kHz/128kbps~192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks
United States and/or other countries.

of Microsoft Corporation

in the

J51T0101E!.i_o22
4_F•r

6/22/09

4:29:42

About file menu
or
Load
WMA
an files
Audiohave
CD been
or a disc
recorded
on which
in the
MP3
disc
slot.

Scroll indicator

Operation status
3/15

A file browser screen will appear on the screen.

00:00:00

Selected file name

Tool kit
window
File

I
Cursor

Preview window

.b : Indicates Music file (Audio CD/MP3/WMA)
[]

In case the current directory includes more than 8
files, press • or • to scroll in the file list.
To see contents in folder, select the folder and then
press ENTER. To return to the parent directory, press
RETURN or select "f= Go Up ..." then press ENTER.
When PLAY is pressed after the file browser
displayed, playback begins automatically starting
from the first file. In this case, if the first file is an
MP3/WMA file, only MP3/WMA files are played
back in order. If the first file is a JPEG file, the first
JPEG file is played back. If there is no file at a root
directory, playback does not begin automatically.

Note:
• In the case of a CD containing a mixture of MP3, WMA
and JPEG files, the files are played back by selecting
them from the file browser.

E
O"
¢)

Note:
• During MP3/WMA playback, you cannot use Jump and A-B
Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for Audio CD/MP3/WMA/JPEG playback

N)N).
• Select Files
The file type to make it display in the file browser can
be chosen.
1.Press ,_ or • to highlight "Select Files" at right column
in the file browser.
2. Press ENTER, then press • or • to select file type
from the list (Music or Picture).
3. Press ENTER to add/remove check mark. Checked
file type will be displayed in the file browser.
4. Press RETURN to save the setting.

Pressselected
ENTER.file starts playing back.
The

@
Press STOP to end playback.
STOP

¢)

: Indicates Picture file (JPEG)

Note:
• Select files is not applicable to Audio CD.

• The unit records the stopped point. "_" appears
on the TV screen. Press PLAY to resume playback
(from the scene point).
• If you press STOP again or unload the disc, the unit
will clear the stopped point.

53
6/22/0J
J51T0101D.indb

4_lrr

4:29:43

ZOOM
..........
DVD MENU

G andAudio CD
operation (Continued)

ENTER
A/V/Repeat playback

(Audio CD/

l I_

Random

In
the file browser,
press
< / I_ / • / • to select
"Repeat"
during stop
mode.

playback

(Audio CD/

In
the fileduring
browser,
press
<1/I_ / • / • to select
"Mode"
stop
mode.

Press
"All". ENTER repeatedly to select "Track" or

Press ENTER to select "Random".
<
=3
¢3
¢1)

,.<
o

Press PLAY.
PLAY

The
unit automatically
repeat
playback
after finishingstarts
the current
track.

• To resume normal playback
Select Repeat • "Off" in step 2.

•

Note:
• The repeat function is canceled when you eject the disc
or turn the power off.
• Track repeat function is canceled whenever SKIP H_ or
I_ is pressed.

Note:

Press PLAY.
PLAY

The random playback will start.

To resume normal playback
Select Mode "Off" in step 2.

• The random function is canceled when you eject the disc
or turn the power off.

55
6/22/0J
J51T0101D.indb

4:29:45

random and program playback
usingf!le browser (Continued)

n the Mode",
file browser,
"Edit
then press
press
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 68
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 4, 0, 0, 13
Create Date : Sat Feb 13 04:14:58 2010
Author :
Title :
Subject :

EXIF Metadata provided by EXIF.tools

Toshiba 15LV505 User Manual LCD TELEVISION/DVD Manuals And Guides L1002033

TOSHIBA TV/VCR or DVD Combo Manual L1002033 TOSHIBA TV/VCR or DVD Combo Owner's Manual, TOSHIBA TV/VCR or DVD Combo installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation