Toshiba 50HM66 User Manual DLP TELEVISION Manuals And Guides L0605020

TOSHIBA DLP Television Manual L0605020 TOSHIBA DLP Television Owner's Manual, TOSHIBA DLP Television installation guides

User Manual: Toshiba 50HM66 50HM66 TOSHIBA DLP TELEVISION - Manuals and Guides View the owners manual for your TOSHIBA DLP TELEVISION #50HM66. Home:Electronics Parts:Toshiba Parts:Toshiba DLP TELEVISION Manual

Open the PDF directly: View PDF .
Page Count: 55

TOSHIBA

IMPORTANTNOTE

Beforeconnecting,operating,oradjustingthisproduct,carefully

readtheImportantSafety,Installation,Care,andService

informationintheInstallationGuide,

ForanoverviewofstepsforsettingupyournewTV,seepage4.

Note:Todisplaya HighDefinitionpicture,theTVmustbereceivinga

HighDefinitionsignal(suchasan over:the-airHighDefinitionTV

broadcast,a HighDefinitiondigital cableprogram,or a HighDefinition

digitalsatelliteprogram).FOrdetails,pleasegontadyourTVanteana

instaiier,cabieprovider,or sateiiiteprovider.

Note:!f the rV is poweredoti and_henquicklyon againwhenthe

]ampunii is hot,it may_akeseveralminutesfor the pictureto appear

on:screen.This isa propertyof DLP_TV [amptechnologyand is NOT

a sign of malfunction.Fordetaib, see'IMPORTANTNOTICEABOUT

HOTLAMPRESTART"on page2.

HM66 ENbook Page 2 Tlmrsdav Februa W 23 2006 2:49 PM

CAUTION: This television is for use only with

the Toshiba stand indicated below. Use with other

carts or stands is capable of resulting in

instability, causing possible injury.

Television Stand Model

50HM66 ST5066

56HM66 ST5666

Welcometo Toshiba

Thank you for purchasing this Toshiba TV, one of the most

innovative DLP "lxfprojection TVs on the market. We have

provided two separate guides to facilitate the installation and

operation of your TV.

Please use the Guides in the order shown below to get the most

enjoyment from your new TV.

• The "h*smllation GuMe" explains tmw to connect your TV to

your antenna and equipment.

• The "Operating GuMe" (this Guide) provides step-by-step

instructions for using your TV's many features.

importantnotesabeut your

B£PrMprejectien Tg

1) The light source for this TV is a projection lamp unit with a

limited service life. When the lamp wears out, the picture

may become dark or black or the lamp may fail, at which time

you must replace the lamp unit. See "Lamp unit replacement

and care" (re pages 47-49).

2) When the lamp mode is set to Low Power, every time the

TV is powered on, the lamp will initially be in High Bright

mode but will switch to Low Power mode after a short

period of time. You may notice a change in screen brightness

when this happens. This is normal and is not a sign of

malfunction.

(r_ page 42 for details.)

3) Every time the TV is powered on, it may take several minutes

for the picture to obtain full brightness (t_¢"IMPORTANT

NOTICE ABOUT "HOT LAMP RESTART," at right).

4) The TV's display is manufactured using an extremely high

level of precision technology; however, an occasional pixel

(dot of light) may show constantly on the screen. This is a

structural property of DLP "lxf(Digital Light i%'ocessing "lxf)

technology and is not a sign of malfunction. Such pixels are

not visible when the picture is viewed from a normal viewing

distance.

5) Always sit approximately 10-25 feet away from the TV and

as directly in front of it as possible. The picture quality may

be affected by your viewing position and length of viewing

time. If you sit too closely to the TV for too long, you may

suffer from eye fatigue. See item 29 of the "care" information

in the separate Installation Guide.

6) Depending on the media you are viewing, it is possible,

although unlikely, that a limited number of viewers may see

a "rainbow effect" on the screen, w,hich can, in rare instances,

result in eye fatigue. This is a rare occurrence related to DLP

technology and is not a sign of TV malfunction.

7) This TV contains several cooling fans to moderate the

internal temperature. You may be able to hear the

fans for several minutes after the TV is turned off.

This is a function of the Quick RestarO x_feature

and is not a sign of TV malfunction. You can set

the Quick RestarO xffeature to stop the fans as soon as the TV

is powered off. See "Setting the Quick RestarO xf feature"

(r_ page 20).

8) The yellow and blue LED lights at the bottom center of the

TV front indicate your TV's current status. If either light

flashes, see "LED indications" (re page 46).

9) Every time the TV power cord is plugged in, the yellow LED

will blink until the TV enters standby mode (plugged in but

not powered on). This is normal and is not a sign of

malfunction.

"Voice announce" feature

When certain non-standard conditions occur, the LEDs on

the TV will blink and the TV will play a recorded

"voice announcement" describing the condition (see the

LED indication table on page 46 for the specific conditions

that include a voice announcement).

To repeat the voice announcement and hear additional

information, press the MENU button on the TV while the

LEDs are blinking.

IMPORTANTNOTICEABOUT"NOT LAMP RESTART"

When the TV has been powered on long enough for the lamp

unit to get hot, it may take several minutes for the picture to

appear on-screen in the following situations:

• When the Quick Restart TM feature is set to OFF and

you turn the TV off and then on again within a few

minutes; or

• If the TV is on when a short-term power failure, power

surge, or other similar power failure occurs, such that

the TV loses and regains power within a few minutes,

This is a property of DLP TV lamp technology and is

NOT a sign of malfunction.

If this occurs, the yellow LED on the TV front panel will blink

(and the blue LED will be lit solid) until the TV is finished

restarting the lamp and the normal picture appears. If both

LEDs are blinking, you will need to turn the TV off and then

on again to restart the lamp.

#ademm'k infermatien

•This product incorporates copyright protection technology that is

protected by U.S. patents and other intellectual property rights. Use

of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

• WOW, SRS and (e) symbol are trademarks of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc.

• *Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are registered trademarks of Dolby

Laboratories.

• CableCARD TM is a trademark of Cable Television Laboratories, Inc.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

• Digital Light Processing TM, DLP TM and the DLP TM medallion are

trademarks of Texas Instruments.

HM66 (E/F) Web 213:276

HM66 ENbook Page 3 Thursday, Febnta W 23, 2006 2:49 PM

Chapter 1: Introduction ............................ 4

Features of'tour new TV ............................ 4

Overview of steps for installing, setting up, and using

your new TV .................................. 4

TV l?'ont and side panel controls and connections ......... 5

TV back panel conuectious ........................... 6

Chapter2: Usingthe remote control................... 7

Prepm'iug the remote control for use .................... 7

Installing the remote control batteries .................. 7

Remote control efl_:ctive rauge ........................ 7

Learning about the remote control ..................... 8

Usiug the remote control to control your other devices ..... 9

Remote Control functional key chart .................. 10

Programming tile remote control to control your other

devices ...................................... I 1

Remote control codes .............................. 12

Chapter3: IVlenu layoutandnavigation................. 14

Main menu la2rout ................................. 14

Setup/Installation menu layout ....................... 15

Navigating the menu system ......................... 15

Chapter 4: Setting up your IV ........................ 16

Selecting the menu lmlguage ........................ 16

Configuring the autenna input sources for the ANT 1

and ANT 2 terminals ........................... 16

Programming channels into the TV's channel memory .... 17

Programmiug channels automatically .............. 17

Manually adding and deleting channels in the chanuel

memory .................................. 17

Programmiug your lavorite channels .................. 18

Setting the ColorStream HD audio mode ............... 211

Setting the HDMP x_audio mode ..................... 20

Viewiug the CableCARD I_1menu .................... 20

Settiug the Quick Restart Ix1feature ................... 20

Viewiug the digital signal meter ...................... 21

Viewiug the system status ........................... 22

Chapter 5: Using the TV's basic features ................ 23

Selecting the video input source to view ............... 23

Labeling the video input sources ..................... 23

Tuning chamlels .................................. 24

Using the Cha*mel Browser jx_ .................... 24

Tuuing your favorite cha*mels .................... 26

Tuning to the next programmed cham_el ............ 26

Tuning to a specific cha*mel (programmed or

unprogrammed) ............................ 26

Switching between two chanuels using Channel

Return ................................... 26

Switching between two channels using SurfLock jxl ... 26

Selecting the picture size ........................... 27

Scrolling the TheaterWide ® picture (TheaterWide 2

and 3 only) ................................... 28

Using the auto aspect ratio li:ature .................... 29

Selecting the ciuema mode

(480i signals only) ............................. 29

Adjusting the picture ............................... 30

Selecting the picture mode ....................... 30

Adjusting the picture quality ..................... 30

Using the closed caption mode ....................... 31

Closed Captiou Advanced ....................... 31

Digital closed captions .......................... 32

Adjusting the audio ................................ 32

Muting the sound .............................. 32

Usiug the digital audio selector ................... 32

Selecting stereo/SAP broadcasts .................. 33

Adjusting the audio quality ...................... 33

Using the StableSound ® feature ................... 34

Turning off the built-in speakers .................. 34

Selecting the optical audio output format ........... 34

Using the Locks menu ............................. 35

Entering the PIN code .......................... 35

If you canuot remember your PIN code ............. 35

(banging your PIN code ........................ 35

Blocking TV programs and movies

by rating (V-Chip) .......................... 36

Blocking channels ............................. 37

Unlocking programs temporarily .................. 38

Using the iuput lock feature ...................... 38

Using the control panel lock feature ............... 39

Setting the sleep timer .............................. 39

Displaying TV setting information on-screeu using

RECALL .................................... 40

Understanding the auto power off li:attlre .............. 40

Understanding the last mode memory feature ........... 40

Chapter6:Usingthe lV's advancedfeatures............. 41

Using the adv:mced picture settings li:atures ............ 41

Using dyuamic contrast ......................... 41

Using CableClear®/DNR (digital noise reduction) .... 41

Using MPEG noise reduction ..................... 41

Selecting the color temperature ................... 42

Selecting the lamp mode ........................ 42

Using the Game Mode feature .................... 43

Using the advauced audio settings features ............. 43

Using the SRS WOW I_1surround sound feature ...... 43

Chapter 7: Troubleshooting ......................... 44

General troubleshooting ............................ 44

LED iudicatious .................................. 46

Chapter 8: Appendix.............................. 47

Lamp unit replacement and care ...................... 47

Replacing the lamp unit

(User-replaceable component) ................. 47

When to replace the lamp uuit .................... 47

How to replace the lamp unit ..................... 48

Disposing of the used lamp unit ................... 49

Specifications .................................... 50

Lfinited United States Warranty

li_)r[)LP _x_Television Models .................... 51

Limited Canada Warranty

for DLP Ix(Televisiou Models .................... 52

Index........................................ 54

HM66 (E/F) Web 213:27(

HM66 ENbook Page 4 Tlmrsdav Februa W 23 2006 2:49 PM

NOTICE OF POSSIBLE TV STAND INSTABILITY

DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH! Use this TV only with

the TOSHIBA TV stand listed in the

"Specifications" section of this manual. Use with other

stands may result in instability, causing possible injury or

death.

CAUTION:This television is for use only with the Toshiba

stand indicated below. Use with other carts or stands is

capable of resulting in instability, causing possible injury.

Television Stand Model

50HM66 ST5066

56HM66 ST5666

FeaturesofyournewTV

The following are just a few of the many exciting features of

your new Toshiba widescreen, integrated HD, DLP TM

projection TV:

• Integrated digital tuning (8VSB ATSC and QAM)

eliminates the need for a separate digital converter set-top

box (in most cases).

• Digital CableCARD TM slot for viewing encrypted digital

Cable TV programs (ir_ hlstallation Guide).

• Two HI)MI TM digital, high-definition multimedia

interfaces (ir__ Installation Guide).

• Two sets of ColorStream® HD high-resolution component

video inputs (Ir_r"Installation GuMe).

• SRS WOW TM (Ir_> page 43), audio technologies.

• Digital Audio Out optical audio connection with Dolby _

Digital optical output format (ir_> page 34; also see

Installation Guide).

• CableClear ® DNR digital picture noise reduction

(tr_> page 41).

"Voice announce" feature

When certain non-standard conditions occur, the LEDs on

the TV will blink and the TV will play a recorded

"voice announcement" describing the condition (see the

LED indication table on page 46 for the specific conditions

that include a voice announcement).

To repeat the voice announcement and hear additional

information, press the MENU button on the TV while the

LEDs are blinking.

Overviewofstepsfor installing,

settingup, andusingyournewTV

Follow these steps to set up your TV and begin using its many

exciting features.

Carefully read the important safety, installation, care, and

service information in the separate Installation Guide.

Keep this manual tor future reference.

Observe the following when choosing a location for the

TV:

• Read the separate Installation Guide.

• Read "Important notes about your DLP TM projection

TV" (ir_ page 2).

• Place the TV on the applicable optional TV stand listed

in the "Specifications" section (if available for this TV

model) or on a sturdy, level, stable surface that can

safely support the size and weight of the unit.

• Place the TV in a location where light does not reflect

on the screen.

• Place the TV far enough from walls and other objects to

allow proper ventilation. Inadequate ventilation may

cause overheating, which will damage the TV. THIS

TYPE OF DAMAGE IS NOT COVERED UNDER

THE TOSHIBA WARRANTY.

Do not plug in any power cords until AFTER you have

connected all cables and devices to your TV.

BEFORE connecting cables or devices to the TV, learn

the functions of the TV's connections and controls

(Ir_ pages 5-6).

Connect your other electronic device(s) to the TV

(1>;€hlstallation Guide).

Install the batteries in the remote control (Irgvpage 7).

See "Learning about the remote control" (rW page 8) for

an overview of the buttons on the remote control.

Program the remote control to operate your other

device(s) (Irgvpages 9-13).

AFTER connecting all cables and devices, plug in the

power cords for your TV and other devices.

After you plug in the TV power cord, the yellow LED

ion the TV front ) will blink 3 times. Wait several

seconds until the yellow LED stops blinking and then

press _E, on the TV or remote control.

See "LED indications" (ir_ page 46).

See "Menu layout and navigation" for a quick overview of

navigating the TV's menu system (r:_ page 14).

Program channels into the TV's channel memory

(__ page 17).

For details on using the TV's features, see Chapters 5

and 6.

For help, refer to the Troubleshooting Guide

(Irw Chapter 7).

For lamp unit replacement instructions, see Chapter 8.

For technical specifications and warranty information, see

Chapter 8.

Enjoy your new TV!

HM66 (E/F) Web 213:276

HM66 ENbook Page 5 Tlmrsdav Februa W 23 2006 2:49 PM

TVfrontandsidepanelcontrolsandconnections

Frontof TV Rightsideof TV

LE_[LAMP POWER ]

1Remote sensor (behind the screen) -- Point the remote

control toward this area of the TV screen. See "Remote

control effective range" (ire'vpage 7).

2Blue, Yellow and Green/Red LEDs

See "LED indications" (ir_ page 46) for additional

information.

3POWER -- Press to turn tile TV on and oft:

If the TV stops responding to the controls on the remote

control or TV control panel and you cannot turn offthe

TV, press and hold the POWER button on the TV control

panel for 5 or more seconds to reset the TV.

CHANNEL ^ v -- When no menu is on-screen, these

buttons change the channel (programmed channels only;

_r_'_page 17). When a menu is on-screen, these buttons

function as up/down menu navigation buttons.

VOLUME +--- When no menu is on-screen, these

buttons adjust the volume level. When a menu is on-

screen, these buttons function as left/right menu

navigation buttons.

INPUT -- Repeatedly press to change the source

you are viewing (ANT 1, VIDEO 1, VIDEO 2,

ColorStream HD-1, ColorStream HD-2, HDMI 1,

HDMI 2, ANT 2).

Controlpanel Sidepanel

*MENU (ENTER) -- Press to access the menu system

(Ir_>"pages 14-15). When a menu is on-screen, the MENU

button on the TV's side control panel functions as the

Enter button.

ARROWS AV'4 • -- When a menu is on-screen, these

buttons function as up/down/left/right menu navigation

buttons.

EXIT -- Press to instantly close an on-screen menu.

VIDEO-2 IN -- The side panel A/V connections are

referred to as "VIDEO 2" and include standard A/V

connections plus optional S-video.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 6 Thursday Februal T 23 2006 2:49 PM

TVbackpanelconnections

For an explanation of cable types and connections, see the Installation Guide.

8 9

VIDEO 1 IN -- Standard (composite) video and standard

audio inputs plus optional S-video inputs for connecting

devices with composite video or S-video output.

Note: Standard (composite) video and S-video cables

carry only video information; separate audio cables are

required for a complete connection.

ColorStream ®HD-1 and ColorStream ®HD-2-

Two sets of ColorStream ® high-defnition component

video inputs (with standard stereo audio inputs) for

connecting devices with component video output, such as

a Toshiba DVD player with ColorStream ®.

Note: Component video cables carry only video

information; separate audio cables are required for a

complete connection.

ColorStream ®HD-1 and ColorStream ®HD-2

Audio IN -- ColorStream HD-I/2 audio input terminals

are shared with HDMI 1/2 analog audio input terminals,

and their use can be configured in the Setup menu

(ir_v "Setting the ColorStream HD audio mode" page 20).

Variable Audio OUT-- Standard analog audio outputs

for connecting an analog amplifier with external speakers.

A/V OUT- Standard composite video and analog audio

outputs for connecting a VCR for editing and dubbing.

IR OUT -- For controlling infiared remote-controlled

devices through the TV. You can connect up to two

devices with an IR blaster cable, and then control the

devices using the TV's IR pass-through features.

ANT 1 and ANT 2 -- Two inputs that support analog

(NTSC) and digital (ATSC) off-air antenna signals and

analog and digital (QAM) Cable TV signals.

Note: If you have an antenna only, connect it to ANT I. tf

you have both cable TV and an antenna, connect the

cable TV to ANT 1 and the antenna to ANT2

HDMI TM 1and 2IN -- Two High-Definition Multimedia

Interface inputs receive digital audio and uncompressed

digital video from an HDMI device or uncompressed

digital video from a DVI device. Also see item 2.

Digital Audio OUT -- Optical audio output in Dolby

Digital or PCM (pulse-code modulation) format for

connecting an external Dolby Digital decoder, amplifier,

A/V receiver, or home theater system with optical audio

input.

CableCARD TM slot -- For use with a digital security

card and digital cable TV selwice (provided by your local

cable operator) to view encrypted digital programming

(try> page 20).

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

CableCARD is a trademark of Cable Television Laboratories, Inc.

HM66 (E/F) Web 213:276

HM66 ENbook Page 7 Thursday Februal T 23 2006 2:49 PM

Preparingthe remotecontrol

for use

Your TV remote control can operate your TV and many other

devices such as cable converter boxes, satellite receivers,

VCRs, DVD players, and HTIBs (home theater in a box), even

if they are different brands.

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate most

Toshiba devices (ir_vpage 11).

If you have a non-Toshiba device or a Toshiba device

that the remote control is not preprogrammed to

operate:

You can program tile TV remote control so it will operate tile

other device (Ire'r"pages 9-13).

Installingthe remotecontrol

batteries

1Remove the battery cover flom the back of the remote

control.

Squeeze tab and l|_]l _)lift cover.

2Install two "AAA" size batteries, making sure to match

the + and- signs on the batteries to the signs on the battery

compartment.

3Reinsell the battery cover in the remote control until the

tab snaps.

Caution: Never throw batteries into a fire.

Notes:

•Be sure to use AAA size batteries.

•Dispose of batteries in a designated disposal area.

°Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in

accordance with applicable laws and regulations.

°tf the remote control does not operate correctly, or if the

operating range becomes reduced, replace batteries with

new ones.

°When necessary to replace batteries in the remote control,

always replace both batteries with new ones. Never mix

battery types or use new and used batteries in combination.

°Always remove batteries from remote control if they are

dead or if the remote control is not to be used for an

extended period of time. This will prevent battery acid from

leaking into the battery compartment.

Remotecontroleffective range

For optimum performance, aim the remote control directly at

the TV and make sure there is no obstruction between the

remote control and the TV.

Point remote control

toward remote sensor

on front of TV.

16.4 ft (5m)

tHM66 (E/F) Web 213:27(

HM66 ENbook Page 8 Tlmrsdav Februa W 23 2006 2:49 PM

Learningaboutthe remotecontrol

Tile buttons used for operating tile TV only are described here.

For a complete list of the remote control's functions, see the

remote control functional key chart (_'_ page 10).

+10

III 6

]l| 10

14 -15

17 -18

Note: The error message "NOTA VAILABLE" may appear if

you press a key for a function that is not available.

1- - POWER

POWER turns tile TV on and off. Press O to turn on tile

TV. The blue LED indicator on the TV front will be

illuminated. Press P_ERagain to turn off the TV.

Note: TheQuick RestartTM setting will affect the amount of

time it takes for thepicture to appear when you turn on the

TV(ri_ page 20).

2FREEZE fieezes the picture. Press again to restore the

moving picture.

3SLEEP accesses the sleep timer (_'r page 39).

4PIC SIZE cycles through the five pictures sizes: Natural,

TheaterWide 1/2/3, and Full (t_> page 27).

5Channel Numbers (0-9, -/100) directly tune

channels. The "-" button is used to tune digital channels

(tr_'rpage 26) or to display the favorite channel list

(Ir,'r"page 19).

6INPUT selects the video input source (_'r page 23).

7CH AV cycles through programmed channels when no

menu is on-screen (r,'r"page 17) and functions as page up/

down when a menu is on-screen.

8VOL + - adjusts the volume level.

9HOME (lql')accesses the home function of the Channel

Browser TM feature (ir_> page 26).

10 RECALL displays TV setting intk)rmation on-screen

(ir_ypage 40).

11 CH RTN returns to the last viewed channel (Ir_>"page 26).

12 MUTE reduces or turns off the sound (ir_ page 32).

1,7 •/a;i• While watching TV, these buttons open the

Channel Browser TM banner and tune to the pmvious/next

channel in the channel history (ir_> page 24). (Also see

"Arrow buttons".)

14 Arrow buttons (AV• •) When a menu is on-screen,

these buttons select or adjust programming menus. (Also

see '_ •/_4•.)

15 FAV AV tunes to the next higher/lower favorite channel

(Ire'r"page 19).

16 ENTER activates highlighted items in the main menu

system.

17 MENU accesses the main TV menu system (tr_'rpages 14

and 15).

18 EXIT closes on-screen menus.

19 MODE SELECT Switch switches between TV,

CABLE/SAT, DVD, and VCR modes (_'r page 9). Set to

"TV" to control the TV.

HM66 (E/F) Web 213:276

HM66 ENbook Page 9 Tlmrsdav Februa W 23 2006 2:49 PM

Usingthe remotecontrolto control

yourotherdevices

If you have a non-Toshiba device or a Toshiba device that the

remote control is not preprogrammed to operate, you must first

program the remote control to recognize the device (if you

have not aheady done so) (Ire'r"pages 11-13).

To use your TV remote control to operate a:

•Cable converter box or satellite receiver, set the MODE

SELECT Switch to CABLE/SAT.

• VCR, set the MODE SELECT Switch to VCR

• DVD player or HTIB, set the MODE SELECT Switch to

DVD.

Note: Even after the TV remote control is programmed, it may

not operate certain features on your other device, tf this

happens and you wish to use those features, you will need to

use the device's original remote control.

Point the remote control

directly at the device.

CD : Q

2QQCD

Q CD(:i:)

a--

4 4 lit _AUS_STEp>---.-.._ stop I1| 4_'J

1"'7 /c 111...................c-<o _11|""19

181___1 -- 11" J!i20

1POWER Turns the selected device on and off

2Channel Numbers (0-9) Press to directly access

channels (as opposed to _ _,").

3+10 Press to directly access DVD chapters higher than 10.

4CH ,&•

•selects the next higher channel;

• selects the next lower channel (for channels

programmed into memo Uonly).

8GUIDE Displays channel guide.

6INFO Displays TV status information on-screen.

7••'_ • Press to navigate DVD menus (may not work on

some DVD players).

8ENTER Required by some satellite receivers and DVD

players.

9DVD CLEAR Press to reset the title and chapter number.

10 PLAY Begins playback of a tape or DVD.

11 PAUSE Press during play or record mode to pause the

picture; press again to restart.

12 STOP Stops the tape or DVD.

13 SKIP _ Skips forward to locate later DVD chapters.

14 FF Fast-forwards the tape or DVD. (Press during play

mode to view the picture moving rapidly forward.)

15 SKIP _ Skips back to beginning of current DVD chapter

or locates previous chapters.

16 REW Rewinds/reverses the tape or DVD. (Press during

play mode to view the picture moving rapidly backward.)

17 TV/VCR To view one program while recording another,

press to select TV mode.

18 REC Starts tape recording.

19 TOP MENU Accesses a DVD's top menu.

20 SET UP Accesses a DVD's setup menu.

21 MODE SELECT Switch Set to "TV" to control the TV;

"CABLE/SAT" to control a cable converter box or

satellite receiver; "DVD" to control a DVD player or

HTIB; "VCR" to control a VCR.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 10 Thursday February 23. 2006 2:49 PM

RemoteControlfunctional key chart

Notes:

• "---" = key does not send a signal in that remote control mode.

° _TV = key will affect the TV, even when the remote control is not in the "TV" device mode.

Power

Sleep timer

TV/Video select

Digit 1-9

Digit 0

- (sub channel)

RECALL

Previous channel

Menu/DVD Menu

Menu select/

FAV up/down

Menu select/

Channel Browser TM

Menu select/

Channel Browser TM

Enter

Exit

Volume up/down

Channel

up/down

Picture size

Sound mute

Channel Browser TM

Home

Freeze picture

Power

Digit 1-9

Digit 0

Channel

up/down

Power

Digit 1-9

Digit 0

- (sub CH)

lnfo

up/down

Menu left

Menu right

Select Enter

Exit

Channel

up/down

SAT Guide

Power

Digit 1-9

Digit 0

100

Display

Channel

upAtown

Fast FWD

Pause

Play

Rewind

Stop

TV/VCR

Record (2 click)

Power

Digit 1-9

Digit 0

+10

DVD Menu

Menu up/down

Menu left

Menu right

Enter

DVD Clear

Fast FWD

Pause

Play

Rewind

Stop

Skip REV

Skip FWD

DVD Setup

Top Menu

HM66 (E/F) Web 213:276

HM66 ENbook Page 11 Thursday February 23. 2006 2:49 PM

Programmingthe remote controlto

controlyour other devices

Your Toshiba TV remote control is preprogrammed to operate

most Toshiba devices. To program your TV remote control to

operate a non-Toshiba device (or a Toshiba device that it is not

preprogrammed to operate), follow the steps below. For details

on using the remote control to operate the device, see page 9.

In tile remote control code table (ir_ page 12), find tile

code for your device. If more than one code is listed, try

each one separately until you find one that works.

Set the MODE SELECT Switch to the type of device you

are programming the remote control to operate --

CABLE/SAT (for a cable converter box or satellite

receiver), DVD (for a DVD player or HTIB [home theater

in a boxl), or VCR (for a VCR or TV/VCR combo).

While holding down ,E_LL,press the Channel Number

buttons to enter the 3-digit code for your device.

To test the code, turn on the device, point the remote

control at it, and press ,_E, See notes below,

• If the correct code was entered, the device will turn off,

• If the device does not respond, repeat steps 1-4 using

another code,

• If the device does not respond to another code, you will

need to use the remote control that came with the

device,

5Remember to set the MODE SELECT Switch back to TV

to control the TV,

6 For future reference, write down the code(s) you used:

Notes:

•tn addition to POWER, confirm thatallnecessarykeys on the

TVremote control operate your device, tf some keys are not

operational, repeat the device code setup using another

code (if other codes are listed for your device). If, after trying

all listed codes, the necessary keys do not operate your

device, use the device's original remote control.

• Every time you change the batteries, you will need to

reprogram the remote control.

• Some newer VCRs respond to either of two codes. These

VCRs have a switch labeled "VCR1/VCR2." tf your VCR has

this kind of switch and does not respond to the codes for

your VCR brand, set the switch to the other position ("VCR1"

or "VCR2") and reprogram the remote control.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 12 Thursday Februarv 23. 2006 2:49 PM

Remotecontrolcodes

In some cases you may not be able to

operate your device with the TV

remote control. Your other device may

use a code that is not recognized by the

TV remote control. If this happens, use

the device's remote control.

Cable converter box

ABC 061. 062. 063. 082.

084. 087. 091. 092.

I)96. 098

Archer I)65. 092. 097.099

Cableview 064. 094

Century 092

Citizen 090. 092. 097

Contec 083. 085. 086.088.

093. 098

Diamond 093

Eagle 1)91

GE 061,062

Gemini 069,070, 094

General Instruments 062. 089. 096

Hamlin 093

Hitachi 062.095. 096

Jasco 097

Jerrold 062.069. 071. 082.

086. 089. 091. 096

Magnavox {)72. 096

Memorex {)91. 092. 104

Multi Canal 090

Novavision 101

P:m:tsonic 081. 083. 085

Philco 087

Philips {)66. 067. 068. 070.

072. 073. 074.075.

091. 092

Pioneer 076.077

Proscau 061. 062

Radio Shack I)92.097. 099

RCA I)64. 081

Realistic 065

Recoton 11)2

Samsung 077.090

Scientific Atlanta 063. 078. 079.080.

088. 098. 101. 105

Sears 095

Signature 062

Signature 2000 096

Sprucer 081. 085

Starcom 069. 082. 087.096.

103. 104

Stargate 069.090

Sylvania 095. 100

TeleView 090

Texscan 100

Tocom {)71. 084. 085

13.S. Electronics 087.096. 098

1Jnited Cable 082

13niversal 065. 092. 097.099.

102. 103

Wards 1)96

Satellite receiver

Alphast:u" 038.059

Chaparral 034

DISH Network 057

[)rake 020. 040. I)44. 046.

050. 1)53

Echostar 018.04 I. 051

Express Vu 057

Fujitsu 027

GE 008. 009. 013

General Instruments 010. 011.012. 022.

023.03 I. 1}49

Hitachi 033

Hughes 033

Hughes Network

Systems 019

lntersat 048

Janeil 027

JVC 017.1)57

Kenwood 029

Magnavox 060

Optimus 058

Pansat 036. 052

Primestar 015.1)42

Proscan 008. 009. 013

Radio Shack 022. 023. 030

RCA {}{)8.01)9.013. 016

Realistic 030

Samsung 1)59

Sony 014. 055

Star Choice 057

Star Trak 025. 026. 037. 054

STS 024

Toshiba 1}{)0.001. (}{)2.003.

I}{)4,005, {}{}6,007,

020, 031,056

Uniden 021. 028, 030. 032.

035. {)39. {M3. 045.

047,058

Zenith 027

TV/VCRCombo

Action 078

GE 059, 062

Goldstar 065

Panasonic 065

Precision 078

Quasar 065

Realistic 079

Sony 074

Toshiba 057

Totevision 009. 010. 065

Zenith 065

DVD/VCRCombo

Go Video DVD={}87

VCR=081

JVC DVD=088

VCR=082

RCA DVD=089

VCR=083

Samsung DVD=090

VCR=084

Sanyo DVD=091

VCR=085

Zenith DVD=092

VCR=086

DVDplayer

Aiwa {}{t6,{}15

Apex 016, 017

BOSE 097

Broksonic 0l 8

Clarion 019

Classic 020

Daewoo 021

Denon 022. 023. 024. 025

Emerson 026. 027

Fisher 028

Funai 027

GE 001. 029. 030

Go Video 087

GPX 031

Hitachi 005. 032. 033. {)34.

035

JVC 003. 007. 036. 042.

088

Kenwood 037

Konka 008. {)09

Magnavox 004. 038

Memorex 039

Mintek 040

NAD 026

Nakamichi 041

Norcent 043

Onkyo 044

Oritron 058

Pauasonic 010. 045. 046. 047.

048. 049, 050

Philips 004. 051

Pioneer 052. 053. 054. 055

Proscan 001. 056

Qwestar 057. 058

RCA 001. 002. 059. 089

Sampo 060

Samsung 061. 062. 086. 090

Sausui 073

Sauyo 063, 091

Shm'p 064, 067

Sherwood 074

Sony 01 l, 012, 065,066,

068, 069, 070

Sslvania 027

Teac 071

Technics 072

Techwood 075

Toshiba 000. 013. 076. 077.

078

Yamaha 079. 080. 081

Zenith 014. 082. 092

Portable DVDplayer

Aiwa 093

Audiox ox 1}94,{)95

Pauasonic 024. 096. 099

RCA 098

VCR

Admiral

Aiko

Aiwa

Akai

Audiovox

Bell & Howell

Broksonic

Calix

Carver

CCE

Citizen

Colortyme

Craig

049

019

018

003. 004. 037. 038.

039. 058. 069

010

007.068

008, 017

o I0

026

019

1}{}9,010, 011, 012,

013. 014. 015. 019.

057. 073

005

009. 010. 016. 061.

065. 079

HM66 (E/F) Web 213:276

HM66 ENbook Page 13 Thursday February 23. 2006 2:49 PM

Curtis Mathes 001, I}{)5,009, 012,

014, 040, 048,053,

056, 057

Daewuo 0l 1,013, 015, 017,

018, 019, 057,078

Daytron {)78

Denun 063

Dimensia 001,048

Electrohome 010, 020, (165

Emerson 003, (108, 010, 011,

017, 018, 020, 028,

039, (154, 057,062,

065,068, 072

Fisher 007, 016, 021, (122,

023, 057, 064, 068,

070, 071,079

Fuji 004, 041

Funai 018,073

Garrard 018

GE 001,002, 009,040,

042,048, 056

Go Vide() 056, 059, (161,081

Guldstar 005, 010, 014, (154,

056,065,067

Gradiente 018, 065

Harman Kardun 0(./5

Hitachi (124, 025, 035,037,

042, (163, I)71),080

JBL 076

JC Penuey 0{)5, {}{)6,007, (108,

0(.19,010, 023,024,

025, 026, 035, (156,

061,063, {165

Jensen 024,025, 037

J VC {){)5,006, {)t.17,014,

037, 043,062, (163,

068, 082

Kenwood 0(.15,(106, (I{)7,012,

014, (137, 043,053,

068, 07 I

Kodak 010

LG 010

Lloyds {)53,073,079

Logik {)61

LXI 01(.1

Magnasonic 061, (165, {)78

Magnavox {)26,027, 034, 044,

057,061,072

Marantz 0(.15,(106, 0{)7, 012,

014, (126, {)53,067

Memorex 007,009, 01{1,016,

018, 034, 049,063,

065, 066, 068,075,

079

MGA 020, 028, 039

MGN 056

Minolta 024, (125, 035,063

Mitsubishi (120, 024, 025,028,

039,043,065

Montgomery Ward 049

Motorola 049

MTC 009, (146, 06 I

Multitech {)09, 012, 018

NEC {)05,006, 0(.17,012,

014, 037, 043, (153,

054, 067, 070

Nikko 010

Noblex 009

Optimus (I]0, 049, 065

Optonica 031

Orion 054,057, 062, (165,

068, 072

Panasonic

Pentax

Pentex Research

Philco

Philips

Pioneer

Porthmd

Proscan

Proton

Quasar

Radiu Shack

Radiu Shack/Realistic

Radix

RCA

Realistic

Ricuh

RUUCO

Samsung

Sansui

Sanyo

Scott

Sears

Sharp

Shiutom

Signature

Signature 2{}{)0

Singer

Suny

STS

Sylvania

Symphonic

Taudy

Tashiko

Tatung

Teac

Technics

Teknika

Toshiba

Totevisiuu

Unitec

Unitech

Vectur Research

Vide(( Concepts

036, 045,046, 057,

061,072, 079

012, 024, 025, (135,

{,'42,053,063

014

026, 027, 063

026, 031,044, 057

{}{}6,024, {}43,055

012, 013,015

{}{}1, 002, {_8

061

045

010, 031,065

007,009, 01(.1,016,

018, 020, 021,022,

031,049

010

{}{)1,002, {}{}3,009,

024, 025,029, 035,

{}40,042, 045, 048,

055, 056, 063, 07 I,

083

007,009, 010, 011,

016, 018, 020, 021,

022, 031, {}49,051,

056, 060, 065, 075,

079

O47

034

{}{}9,011, 038, 056,

{}73,084

{}{}6,037, 043, 061

{}{t7,009, 016, 054,

064, {t68, 071,075,

079, 085

008, 011,017, 028,

030, 057, 065, 072

{}{}7,010, 016, 021,

022, 023, {)24, 025,

035, {)53, {)57, 063,

064, 065,068, 071,

{}75,079

013, 020, 031,049,

051,060, 066

{}{}4,025,032, {161

{)49

075

{_7, 06l

I}{}4,032, 033, 041,

052, 058, 070, 074,

076, 077, 080

O35

018, 026, 027, 028,

044, 072

018, 051,053, (173,

079

{}{}7

o1o

037

018, 029, 037

036

010, 018, 065

{}{10,011, 021, 023,

024, 028, 030, 039,

057, 074, 078, 079

009, 010, 065

073

009

005,006, 011,012,

053

005, 006, 011, 012,

039, 053

Wards

White Westinghouse

XR- 101}{)

Yamaha

Zenith

HTIB

Lasunic

Panasunic

Venturer

009, 010, Ol 1,016,

Ol8, 020, 024, {t25,

031,035, 049, 051,

056, 057, 060, 065,

066, 079

073

018

005, 006, (I(17,014,

037, 053

004, 032, (134, 041,

(147, 069, 086

083

084

085

HM66 (E/F) Web 213:27(

HM66 ENbook Page 14 Thursday February 23. 2006 2:49 PM

Mainmenulayout

Tile illustrations below and on tile next page provide a quick overview of your TV's menu system.

To open the main menus (illustrated below), " ss MENUpie.. O on the remote control or TV control panel.

Channel Browser ---* [Launches the Channel BrowsegrMl

Applications [Launches the ATSC Digital CC Selectorl (This option is not awfilable,

Digital CC/Audio Selector if you are not on a digital channel).

Dynamic list of items provided by Cable company.

CabIeCARD TM (This option is not available ifa CableCARD TM is not inserted.)

Video Picture Settings ---* [Picture Settings edit window]

Advanced Picture Settings ---* [Advanced Picture Settings edit window]

Theater Settings _ [Theater Settings edit windowl

Audio Audio Settings _ [Audio Settings window]

Advanced Audio Settings ---* [Advanced Audio Settings window]

Audio Setup _ [Audio Setup window]

Preferences Favorite Channels ---* [Favorite Channels edit window]

Closed Caption Mode ---* Off/CCI/CC2/CC3/CC4/TI/T2/T3/T4

Closed Caption Advanced ---* [Closed Caption Advanced window]

Input Labeling _ [Input Labeling edit window]

Menu Language _ English /Franqais /EspalSol

Channel Browser Setup _ [Channel Browser Setup window]

Locks Enable Rating Blocking _ Off/On

Edit Rating Limits ---* [Edit Rating Limits edit window]

Channels Block _ [Channels Block edit window]

Input Lock _ Off/Video/Video+

Front Panel Lock _ Off/On

New PIN Code _ [New PIN Code entry windowl

Setup Installation _ [Opens the Installation menu (ir_ page 15)1

Sleep Timer _ [Sleep Timer edit windowl

ColorStream HDI Audio ---* No/Yes

HDMI 1 Audio ---* Auto /Digital /Analog

ColorStream HD2 Audio _ No/Yes

HDM[ 2 Audio _ Auto /Digital /Analog

Quick Restart ---* Off/On

HM66 (E/F) Web 213:276

HM66 ENbook Page 15 Thursday February 23. 2006 2:49 PM

Setup/Installationmenulayout

•S SS MENU

To open the Installation menu (illustrated below), press o on the remote control or TV control panel, open tile Setup menu,

select Installation, and press @.

SS MENU

Pre,_'s©. Terrestrial

Open tile

Setup menu,

and then open

tile

Installation

sub-menu.

System Status

Input Configuration _ [Input Configuration window[

ANTI _ [Scans for new channels on desired

Channel Program Antenna]

ANT2 _ [Scans for new channels on desired

Antenna]

Channel Add/Delete _ [Channel Add /Delete Window[

Signal Meter _ [Signal Meter Window[

System Information _ [Opens tile System Information windowl

Navigatingthe menusystem

You can use tile buttons on tile remote control or TV control

panel to access and navigate your TV's on-screen menu

system.

• Press M_Uto open the menu system.

• When a menu is open, use tile up/down/left/right arrow

buttons (AV._I_) on tile remote control or TV control panel

to move in the corresponding direction in the menu.

• Press @ to save your menu settings or select a highlighted

item. (A highlighted menu item appears in a different color

in the menu.)

• All menus close automatically if you do not make a selection

within 60 seconds, except the signal meter menu, which

closes automatically after about 5 minutes.

• To close a menu instantly, press EX,¢_.

Note: The menu background may sometimes appear black,

depending on the signal the TV is receiving.

This is not a sign of malfunction.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 16 Thursday February 23. 2006 2:49 PM

Selectingthe menulanguage

You can choose flom three different languages (English,

French and Spanish) for the on-screen display of menus and

messages.

To select the menu language:

1Press M_uand open the Preferences menu.

2Highlight Menu Language and press •.

3 Press • or • to select your preferred menu language and

press @.

.... ENTER• • CH_r_: EXIT

EXIT

4Press co to close tile Preferences menu.

Configuringthe antennainput

sourcesfor the ANT1 andANT2

terminals

To configure the ANT 1and ANT 2 input sources:

1Press M_uand open tile Setup menu.

2Highlight Installation and press @. (A new set of

Installation menu icons will appear on-screen, as shown

in step 3 below.)

Sleep Timer

HDMI 1 Audio

• • _ • Etl_R •• CH_T_:• EXIT

Open tile Terrestrial menu, highlight Input

Configuration, and press@.

!!!ChannelProgram i!il

iiigi;,_;i M;i;; iiiii

_• • EN_R • _H_rN:• Exrr

4Press • or • to highlight ANT 1, and press • or • to

select the input source (Cable or Antenna) for the

ANT 1 input on the TV.

5Press • to highlight Antenna 2 in and then • or • to select

the input source (Cable or Antenna) tor the ANT 2

input on the TV, if applicable. It"you have not connected

anything to the ANT 2 input, skip this step.

Antenna 2In Antenna

To save your new settings, highlight Done and press @.

To revert to your original settings, highlight Cancel and

press @.

HM66 (E/F) Web 213:276

HM66 ENbook Page 17 Thursday February 23. 2006 2:49 PM

Programmingchannelsintothe

TV'schannelmemory

When you press _ or _," on the remote control or TV control

panel, your TV will stop only on the channels you program into

the TV's channel memory.

Follow the steps below to program channels into the TV's

channel memory.

Programmingchannels automatically

Your TV can automatically detect all active channels in your

area and store them in its memory. Alter the channels are

programmed automatically, you can manually add or erase

individual channels.

Notes:

•You must configure the antenna input sources before

programming channels (_. page 16).

° If the input signal type is set to Cable for an antenna input,

the automatic channel programming process erases

channels that were previously programmed into the TV's

memory.

° tf the input signal type is set to Antenna, the automatic

channel programming process does NOT erase channels

that were previously programmed into the TV's memory, but

adds newly found channels to the existing set of

programmed channels. To remove a channel from the

memory, you must manually delete it.

° To tune the TV to a channel not programmed in the channel

memory, you must use the Channel Number buttons on the

remote control.

° Programming channels for an antenna input configured for

Cable will take substantially longer than for an antenna input

configured for Antenna. This is normal; however, once

channel programming is completed, you should not ha ve to

repeat the programming process again unless your Cable

TV service lineup changes significantly.

° If you have a CableCARD TM inserted, channelprogramming

for ANT I is disabled because the CableCARD TM

automatically loads the Cable channel list into the TV's

channel memory. See Installation Guide for details on

CableCARD TM.

To program channels automatically:

1Make sure you have configured the antenna input sources

(_'r page 16).

2Press Mff_uand open tile Setup menu.

3Highlight Installation and press @. (A new set of

Installation menu icons will appear on-screen, as shown

in step 4.)

. • ENTER • • CH_I =• EXIT

4Open the Terrestrial menu, MgMight Channel

Program, and press ,_.

5Highlight ANT 1 or ANT 2, depending on which antenna

input you want to program channels for, and then press @

to start automatic channel programming.

The TV will automatically cycle through all the channels

for the antenna input you selected, and store all active

channels in the channel memory. While the TV is cycling

through the channels, the message "Scanning channels,

please wait" appears (as shown above).

To cancel channel . "EXIT

programming, either press O or

highlight Abort in the on-screen display and press @.

When channel programming is done, press _ or _," to

view the programmed channels.

Manually adding and deleting channels in

the channel memory

After automatically programming channels into the channel

memory, you can manually add or delete individual channels.

To add or delete channels in the channel memory:

1Press Mff_uand open the Setup menu.

2Highlight Installation and press @. (A new set of

Installation menu icons will appear on-screen, as shown

in step 3.)

(con tin ued)

HM66 (E/F) Web 213:27(

HM66 ENbook Page 18 Thursday Februar,¢ 23. 2006 2:49 PM

Open tile Terrestrial menu, highlight Channel Add/

Delete, and thenpress@.

• . • _N_R • • CH_rtl=• Exrr

The illustration below left shows channels programmed

for the ANT 1 antenna input. To view the list of channels

programmed for the ANT 2 antenna input, press AV to

highlight ANT 2 and press ,@.

To add a channel to the channel memory:

Highlight tile unchecked box next to tile channel number you

want to add, and then press @ to check the box.

To manually add digital subchannels on a physical

channel:

Use the Channel Numbers and the Dash ((_)) on the remote

control to enter the channel number (tbr example, 56-1 ).

If the channel is found, the number will be added to the list and

the box will be checked.

If the channel is not found, a message will appear.

To remove a channel from the channel memory:

Highlight the checked box next to the channel number you

want to remove, and then press @ to uncheck tile box.

To save your new settings:

Highlight Done and press @.

To revert to your original settings:

Highlight Cancel and press @ before saving.

To remove all channels from the channel memory:

Highlight Reset and press @, and then highlight Done and

press @.

Notes:

•Thisaction applies to the current antenna input only. To

delete/add channels on the other input, highlight the input

you want (ANTI, or ANT 2) and press @.

° ThisactioncannotbecancelledunlessyouhighlightCanee!

and press @before saving your changes.

Programmingyourfavorite

channels

You can program up to 18 channels as fiwofite channels into

two Favorite Channel lists (nine channels from the ANT 1

input, and nine from the ANT 2 input). You can then scan

through your fiworite channels only, skipping other channels

you do not normally watch.

To add and delete channels in the Favorite Channels

lists:

1Press Mff_uand open tile Preferences menu.

2 Highlight Favorite Channels and press,@.

3Use AV to select either ANT 1, or ANT 2, and press ,@.

4 Highlight Edit and press,@.

ii_input Labeling

, _N NBIN • EXff

To add a channel to the selected Favorite Channel

list:

Use _' to highlight an unchecked box next to a channel you

want to set as a fiworite, and then press @ to check the box.

Note: Youmust first use Channel Program or Channel Add/

Delete to add channels to the channel memory before setting

up favorite channels.

HM66 (E/F) Web 213:276

HM66 ENbook Page 19 Thursday February 23. 2006 2:49 PM

To delete the channel from the selected Favorite

Channel list:

Highlight a checked box and press @ to uncheck it.

iiiiiiB

Note:tf you try to add more than nine favorite channels per

input, an error message will appear. You will need to delete

(uncheck) a channel before you can add another.

When done, highlight Done and press @.

To program favorite channels for another input:

•Either... Highlight ANT 1, or ANT 2, which will change the

favorite channel settings in the selected input. (This will not

change the TV's current input.)

•Or... Press @ to select ANT 1, or ANT 2 and then repeat

steps 1-4, on page 18.

To clear your favorite channel lists:

1Press Mff_uand open tile Preferences menu.

2Highlight Favorite Channels and press,_.

3Highlight Edit and press,_.

4Highlight Reset and press @.

5Highlight Done and press @.

iiiiiiilD2._ --

To tune your favorite channels for the current ANT

input:

Press FAVI /FAVV.

To tune your favorite channels using the favorite

channel list:

1Press (SD to display tile fitvorite channel list.

2Press the corresponding number button (1-9) to select

your desired channel.

Note: To tune your favorite channels for another input,

press @to select the other input.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 20 Thursday February 23. 2006 2:49 PM

Settingthe ColorStreamHDaudio

mode

To set tile ColorStream HD audio mode:

1Press M_uand open tile Setup menu.

2Highlight ColorStream HDl(or 2) Audio and press I_'.

3Press • or• to select Yes or No and press @ to display

the information.

, • , • _N_R • • CHURN= Exrr

Note: The analog audio terminals for the ColorStream HD and

HDMt inputs are used in common. When the ColorStream HD

1 (or 2) audio mode is set to Yes, the HDMt 1(or 2) audio mode

is set to Digital and will be greyed out. When the ColorStream

HD 1 (or 2) audio mode is set to No, the HDMt 1 (or 2) Audio

changes to Auto.

Settingthe HDMITM audiomode

To set the HDMI audio mode:

Press Mff_uand open tile Setup menu.

Highlight HDMI 1 (or 2) Audio and press I_'.

Press • or •to select the HDMI audio mode (Auto,

Digital, or Analog) and press @. (Auto is the

recommended mode.) See "Connecting an HDMI or DVI

device to the HDMI input" (ir_r hlstallation Guide).

Note: The ColorStream HD 1/HD2 Audio settings influence the

HDMt Audio settings, tf ColorStream HD 1(or 2) Audio is set to

No, the HDMt 1 (or2) Audio setting changes to Auto. tf either

ColorStream HD 1 (or 2) Audio is set to Yes, the HDMt 1 (or 2)

Audio setting is set to Digital and will be greyed out.

Viewing the CableCARDTM menu

A CableCARD r_'_enables you to view encrypted digital

channels. See "Connecting a digital CableCARD r_'_''

(Ir__"Installation Guide) for connection and subscription

information.

Note: Connecting your TVdirectly to the Audio/Video output of

your Set- Top-Box will assure a more vivid picture and enhance

your viewing enjoyment.

After the CabIeCARD r_'_is inserted, a CabIeCARD r_'_option

appears in the Applications menu, with informational

screens provided by your digital CableCARD r_'_service (see

illustrations below).

To view the CabIeCARD TM menu:

1Press M_uand open the Applications menu.

2Highlight CableCARD TM and pressl_'.

3Press • or • to select one of the side menu items and

press @ to display the information.

CaNeOARD(tm) Pairing

Note: The CableCARD menu is for informational

purposes only and has no user-adjustable options.

Settingthe QuickRestartTM feature

With the Quick Restart TM feature set to On, the TV will stay in

Standby mode for several minutes after the TV is turned off

(see Note on page 21 ).

If the TV is turned on flom Standby mode, the full picture

appears immediately.

HM66 (E/F) Web 213:276

HM66 ENbook Page 21 Thursday Februar,¢ 23. 2006 2:49 PM

To set the Quick Restart TM feature:

1Press MyNUand open tile Setup menu.

2HigMight Quick Restart and press •.

3Press • or • to select either On or Off and Press @.

Note: tf Quick Restart is set to Off and you turn off the TV,it

can take several seconds for the picture to appear when you

turn on the TVagain. See "important notice about hot lamp

restart," below.

tf Quick Restart is set to On and you turn off the TV,the

following will occur for a few minutes.

•Thescreen (lamp) lights dimly, and

• Thefans continue to run.

This is a function of the Quick Restart Shutdown mode and is

not a TVmalfunction, tf you do not prefer this, set the Quick

Restart feature to Off

When the Quick Restart feature is set to Off, if you repeatedly

turn the TVon and off in a short period of time, the useful

service life of the lamp may be shorter than the average useful

service life (_. page 47).

IMPORTANT NOTICE ABOUT "HOT LAMP RESTART"

When the TV has been powered on long enough for

the lamp unit to get hot, it may take severn minutes for

the picture to appear on-screen in the following

situations:

°When the Quick Restart TM feature is set to Off and

you turn the TV off and then on again within a few

minutes; or

•If the TV is on when a short-term power failure,

power surge, or other similar power failure occurs,

such that the TV loses and regains power within a

few minutes.

This is a property of DLP TM TV lamp technology

and is NOT a sign of malfunction.

If this occurs, the yellow LED on the TV front panel will

blink (and the blue LED will be lit solid) until the TV is

finished restarting the lamp and the normal picture

appears. If both LEDs are blinking, you will need to

turn the TV off and then on again to restart the lamp.

Viewingthe digitalsignalmeter

You can view tile digital signal meter in tile ANT 1 and ANT

2 digital TV input sources only.

To view the digital signal meter:

Press MffNUand open tile Setup menu.

Highlight Installation and press ,_.

A new set of Installation menu icons will appear on-

screen, as shown below.

Open the Terrestrial menu, highlight Signal Meter,

and press @.

Channel Program

4Press ••'_ • to select the antenna input and digital

channel whose signal you want to check.

Note: The physical digital channel number listed in the

Signal Meter screen may not correspond to a virtual TV

channel number. Contact your local broadcasters to

obtain the RFchannel numbers for your local digital

stations.

iiiiiAnt.... 1 ii;i;i;

Physical Digital Channel 4

Virtual Digital Cha,meJ 4/1

To close the screen and return to the Terrestrial

menu:

Highlight Done and press @.

To return to normal viewing:

Press EXiT(._),

HM66 (E/F) Web 213:27(

HM66 ENbook Page 22 Thursday February 23. 2006 2:49 PM

Viewing the systemstatus

To view the system status:

1Press My_uand open the Setup menu.

2 Highlight Installation and press @. A new set of

Installation menu icons will appear on-screen, as shown

below right.

iiiiiSleep Timer

• .• E_ • CHRTN- EXIT

;_ ii_¸ {i

3Open the System Status menu, highlight System

Information, find press(/_.

4 Press • • to scroll through the menu bar to check the

Product Information and Software Version.

iiiiiiiiii ........

Jan 24 2006 11:04:47

!!!!!!!i;! Fw:17

To close the screen and return to the Installation

menu:

Highlight Done find press @.

To return to normal viewing:

Press EXIT(_,

Restore Factory Defaults

To restore all settings and channels to their factory

default values:

1 Follow steps 1-3 above.

Press • • to scroll through the menu bar to select

Factory Defaults.

4Enter your PIN code (or 0000 if no PIN code has been set).

Highlight Yes and press @. The TV will turn off

automatically after a few seconds. After the TV turns off.

unplug the TV power cord and then plug it in again to

complete the restore process.

To cancel the reset:

Highlight No and press @.

Note: If you have previously set the TV to High Bright mode,

and have restored Factory Defaults, the TV wi// default to Low

Power mede. To set the TV back to High Bright mede, see

page 42.

HM66 (E/F) Web 213:276

HM66 ENbook Page 23 Thursday February 23. 2006 2:49 PM

Selectingthe videoinputsource

to view

To select the video input source to view:

Press @ on tile remote control or INPUT on tile TV

control panel.

Press 0-7 to select the input source you want to view,

which will depend on the input terminals you used to

connect your devices (ir_vInstallation Guide).

The current signal source displays in the top right corner

of the Input Selection screen.

|0 _rr 1

O Video 1

Video 2

ColorStream HD1

ColorStmam HD2

HDMI1

HDMI 2

@ ANT 2

- @ /_ to Select

Notes:

°When the Input Selection screen is open, you a/so can use

AV on the remote control (or the CHANNEL A V buttons on

the control panel) to change the input,

•You can repeatedly press _on the remote control or the

INPUT button on the TV control panel to change the input.

°You can label the video input sources according to the

specific devices you have connected to the TV

(F_y"Labeling the video input sources" at right),

°The source can be "hidden" (_ "Labeling the video input

sources" at right).

Labelingthe videoinputsources

You can label each video input source according to the type of

device you connected to each source, l¥om the following preset

list of labels:

"- -"(default label)

Cable

DTV

Satellite/DSS

VCR

Laser Disk

DVD

Audio Receiver

Compact Disc

Video Recorder

Game Console

Hide (to hide an unused input in the Input Selection

screen)

Note: tf you soIoot ANT 2 in the Input selection screen, you can

select either "- -" or "Hide".

To label the video input sources:

1Press MENU©and open the Preferences menu.

2HigMight Input Labeling and press @.

3Press • or • to highlight the video source you want to

label.

Favorite Channels

Press <or • to select the desired label for that input

source. Ifa particular input is not used, you can select

Hide as the label, which will cause that input to be

"grayed out" in the input list and skipped over when you

press @ on the remote control.

To save the new input labels, lfiglflight Done and press

,@. To revert to the factory default labels, lfigMight

Reset and press ,@.

(con tin ued)

HM66 (E/F) Web 213:27( _4_J

HM66 ENbook Page 24 Thursday February 23. 2006 2:49 PM

Input labeling example:

The screen below left shows the delimit Input Selection

screen (with none of the inputs labeled). The screen below

right is an example of how you could label the inputs if you had

connected a DVD player to VIDEO 1, Cable TV to VIDEO 2,

a video recorder to ColorStream HDI, a DTV set-top box to

HDMI 1, and a satellite/DSS set-top box to HDMI 2. Also note

that the ColorStream HD2 input is labeled "Hidden," which

means that the input will be skipped over when @ is pressed.

VJrfeo 1

@ Video 2

ColorStream HD1

ColorStream HD2

HDMI 1

O HDM_2

@ ANT 2

-@ ]_to Select

O DVD

CaNe

I_ Video Recorder

I_ CoEorStelam ND2 (Hidderl)

DTV

Satellite/DSS

ANT 2

-_/_to Select

Input Selectionscreen

with no inputs labeled

Input Selectionscreen with

all inputs labeledexcept input4,

which has beenhidden.

To clear the input labels:

1Press M_uand open tile Preferences menu.

2Highlight Input Labeling and press @.

3Highlight Reset and press,@.

Tuningchannels

Usingthe Channel BrowserTM

The Channel Browser TM stores the most recently viewed

channels or inputs in a history list. In addition, it provides a list

of all the available channels on the ANTI input (up to 2000),

the ANT2 input (up to 2000) and a list of all the inputs on the

TV. This feature allows you to:

• Keep a history of the last 32 channels or inputs viewed.

• Quickly surf and tune your recently viewed channels/inputs

from the Channel Browser TM banner (illustrated on the next

page).

• Suffvia Browse mode (to immediately tune channels as you

highlight them in the Channel Browser TM banner) or Select

mode (to surf over channels in the browser banner before

you select one to tune).

• Quickly change inputs from the Inputs List.

• Set a "HOME" source foran ANT1 grANT2 channel orTV

input.

To set the Channel BrowserTM:

1Press M_uand open the Preferences menu.

2 Highlight Channel Browser Setup and press @.

3 Press • to highlight Navigation, and then press • or •

to select either Browse Mode or Select Mode.

Power Off Clear(On)

Inputs List On

History List

Press • to highlight History List field, then press • or•

to select the setting you prefer either Power Off Clear

(On), On or Off.

Note: When History List is set to On, the channels and

inputs stored in the list will be saved through power on

and off. When History List is set to Power Off Clear (On),

the channels and inputs stored in the list will be cleared

with every power on/off cycle of the TV.

Press • to highlight ANT1 List field, then press • or •

to select On or Off.

Press • to highlight ANT2 List field, then press • or •

to select On or Off.

Press • to highlight Inputs List field, then press • or •

to select On or Off.

To save your entries, highlight Done and press @.

To return to factory detimlts, highlight Reset and press

HM66 (E/F) Web 213:276

HM66 ENbook Page 25 Thursday February 23. 2006 2:49 PM

To open the Channel Browser TM banner:

•Press _ •. ml•, or H_IEon the remote control.

• Press i_ •to surf back from the most recently viewed

channel through the last 32 channels or inputs in the History

list, ANT I channels list, ANT 2 channels list or the inputs

list.

• Press _i • to surf forward from the previous item in the

channel history, ANT 1, ANT 2, or inputs up to the most

recently viewed item or end of list.

Elementsof the Channel BrowserTM banner

1 2

5 6 7 8 9 10 11

1Input type

2Highlighted item (channel or input)

3Channels stored in the channel history

4Home instructions (this will be replaced once there are at

least 6 items in the History, ANT 1 or Inputs lists)

5Cunent list (History, ANT 1, ANT 2 or Inputs)

6Current input

7 Current antenna type (cable or TV)

8Active channel number

9Channel call letters (if available)

10 Resolution

11 Home source

To toggle between History, ANT 1, ANT 2 and

Inputs:

After opening the Channel Browse/r_'_ banner, press • err to

toggle between History, ANT 1, ANT 2 and Inputs.

Note: The Channel Browser TM banner opens in History List by

defaulL Once another list has been selected, the

Channel Browser TM will open in the last selected lisL

To tune to a channel or input in Browse mode:

1While watching TV, press '_ • or _i • to open the

Channel Browse/r_'x banner and surf back to a previous

item or surf forward to the next item in the list.

In Browse mode, when you stop on an item in the

browser banner, it will be highlighted and the TV will

automatically tune to the channel or input.

EXIT

2Press O to close the Channel Browser TM banner.

Note: The Channel Browser TM banner will close

automatically if you do not make a selection within 30

seconds.

To tune to a channel or input in Select mode:

1While watching TV, press _ • or m' • to open the

Channel Browser TM banner and surf back to a previous

item or surf forward to the next item in the list.

In Select mode, when you stop on an item in the browser

banner, it will be highlighted but the TV will not

automatically tune to the channel or input.

Press ,@ to tune the TV to the highlighted item.

3Press E_S to close the Channel Browser TM banner.

Adding and clearing channels and inputs in the

channel history

Adding channels and inputs to the channel history:

The Channel Browsei r_'_automatically creates a history of the

last 32 channels or inputs that were tuned by adding that

channel or input to the right of the list (revisited items are

moved to the end of the list).

The Channel Browser TM will store the following channels:

• All channels that are tuned using the numeric buttons on the

remote control.

• All channels that are tuned to using (_ or _, FAVII, or FAVT

on the remote control and inputs that are tuned to for at least

5 seconds.

Note: The TV will automatically tune to the previously viewed

channel or input whenever an item is selected that cannot be

tuned for various reasons.

Clearing channels from the channel history:

• Turning offthe TV will clear the channel history only if

History List in the Channel Browser Setup is set to

"Power Off Clear (On)."

• Reconfiguring the ANT 1 or ANT 2 input will clear the

channel history.

Note: See page16 for details on configuring the antenna

inpuL

• Removing the CableCARD TM will clear the channel history.

• Once 32 channels or inputs are stored in the history list, the

oldest item will be removed from the list when a new

channel or input is tuned.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 26 Thursday February 23. 2006 2:49 PM

Usingthe Homefeature

To set a channel or input as Home:

1 Tune the TV to the channel or input you would like to set

as the Home source.

2Press and hold ._IE on the remote control for 3 seconds.

When HOME is saved, the Channel Browser TM banner

will appear at the bottom of the screen and the HOME

icon will flash green.

To tune to HOME:

Press the ._IEbutton on the remote to tune to your HOME

channel or input. The Channel Browser TM banner will display

when HOME is tuned unless all lists have been turned to "Off"

in the Channel Browser Setup.

Note: trail lists are turned to off, Home may not be set at this

time, however, if it is already set, pressing the"_E button on the

remote will tune to the Home source, but will not display the

Channel Browser TM .

Tuning your favorite channels

To tune to the channels you programmed as Favorite Channels,

see page 18.

Tuning to the next programmed channel

To tune to the next programmed channel:

Press _'l or _# on the remote control or TV control panel.

Note:Thisfeature will not work unless you program channels

into the TV'schannel memory (c;>page 17).

Tuning to a specific channel (programmed

or unprogrammed)

Tuning analog channels:

Press the Channel Nul]nber buttons (0-9) on the remote

control. For example, to select channel 125, press 1, 2, 5.

Tuning digital channels:

Press the Channel Number buttons (0-9) on the remote

control, followed by the dash ((_)) button and then the sub-

channel number. For example, to select digital channel 125-1,

press 1,2, 5,-, 1.

Note: If a digital channel is not programmed-either through

the automatic channel scan (_ page 17) or the channel add/

delete function Or_'page 17)-you will have to tune the RF

channel using the Channel Number and the dash ((_)) buttons

on the remote control.

Switching between two channels using

Channel Return

The Channel Return feature allows you to switch between two

channels without entering an actual channel number each time.

1Select the first channel you want to view.

2Select a second channel using the Channel Number

buttons (and the dash ((_)) button if selecting a digital

channel).

3Press CH@TNon the remote control. The previous channel

•SS CHRTN

will display. Each rune you pre,i',i' o , the TV will switch

back and forth between the last two channels that were

tuned.

Note:If you press C._T,from a non-antenna input, the TV

will return to the last-viewed ANT input and channel.

Switching between two channels using

SurfLockTM

The SurlLock TM leature temporarily "memorizes" one channel

in the C,(_TNbutton, so you can return to that channel quickly

SS • CHrRTN

flom any other channel by pressing o • To memorize a

channel in the C,(_TNbutton:

1Tune the TV to the channel you want to program into the

CH RTN

0button.

2Press and hold C,ORTNfor"about 9_ssecond,i'suntil the message

"Channel Memorized" appears on the screen. The channel

lms been programmed into the C,4TNbutton.

3You can then change channels repeatedly, and when you

press C,4TN,the memorized channel will be selected.

The TV will return to the memorized channel one time only.

SS CHRTN

Once you press o and then change channels again, the CH

RTN memory will be cleared and the button will function as

Channel Return, by switching back and forth between the last

two channels that were tuned.

HM66 (E/F) Web 213:276

HM66 ENbook Page 27 Thursday February 23. 2006 2:49 PM

Selectingthe picturesize

You can view many program formats in a variety of picture

sizes--Natural, TheaterWide 1, TheaterWide 2,

TheaterWide 3, and Full.

The way the image displays in any of the picture sizes will w_ry

depending on the format of the program you are viewing.

Select the picture size that displays the cunent program the

way that looks best to you.

Your picture size preferences can be saved for each input on

your TV.

To select the picture size:

1Press p_cs_zE©on tile remote control.

2 While the Picture Size screen is on-screen, press the

conesponding number button (0-4) to select the desired

picture size.

Natural

O TheaterWide 1

TheaterWide 2

TheaterWide 3

|O F.,i

_) - _ /_ to Select

Notes:

Pie S_ZE

•You also can repeatedly press oto select the desired

picture size (or press AV on the remote control while the

Picture Size screen is open).

•Full may not be available for some program formats (it will

be "grayed out" in the Picture Size screen).

• You also can select the picture size using the menu system.

Select Picture Size in the Theater Settings menu. Select

the input for which you want to save your picture settings. To

save your settings, highlight Done and press _@.

Using these functions to change the picture size (i.e.,

changing the height/width ratio) for any purpose other than

your private viewing may be prohibited under the Copyright

Laws of the United States and other countries, and may

subject you to civil and criminal liability.

Natural picture size

•The image is displayed close to its originally formatted

proportion. Some program formats will display with

sidebars and/or bars at the top and bottom.

Natural picture size example: The way the image displays

will vary depending on the format of the program you are

currently watching.

Conventional picture on a

conventionalTV screen Conventionalpicture in Natural sizeon

your wide-screen TV

TheaterWide I picture size (For 4:3 format program)

•The center of the picture remains close to its original

proportion, but the left and right edges are stretched wider to

fill the screen.

TheaterWide1 picturesizeexample

fheaterWide 2 picture size (for letter boxpregrams)

• The picture is stretched wider to fill the width of the screen,

but only slightly stretched taller.

• The top and bottom edges of the picture are hidden. To view

the hidden areas, see "Scrolling the TheaterWide @ picture"

(_ page 28).

TheaterWide2 picture sizeexample

(con tin ued)

HM66 (E/F) Web 213:27(

HM66 ENbook Page 28 Thursday Februar,¢ 23. 2006 2:49 PM

TheaterWide 3 picture size (for letter boxprograms

with subtitles)

• Tile picture is stretched wider to fill tile width of the screen,

but only slightly stretched taller.

• The top and bottom edges are hidden. To view the hidden

areas (such as subtitles or captions), see "Scrolling the

TheaterWide _) picture".

O O O

|ABCDE_a |

C) C) C)

C) L-> C)

m ABODEFG ---I

TheaterWide3 picturesize example

Full picture size (for 16:9 [480i, 480P1source

programsonly)

• It" receiving a squeezed 4:3 tonnat program, tile picture is

stretched wider to fill the width of the screen, but not

stretched taller.

• None of the picture is hidden.

Fullpicturesizeexample

Notes:

•tfyou select one of the TheaterWide ®picture sizes, the top

and bottom edges of the picture (including subtitles or

captions) may be hidden. To view the hidden edges, either

scroll the picture (TheaterWide 2 and 3 only) or try viewing

the program in Full or Natural picture size.

• When selecting the picture size, the way the image displays

will vary depending on the format of the program you are

currently watching.

Scrollingthe TheaterWide®picture

(TheaterWide2 and3 only)

You can set separate scroll settings for tile TheaterWide 2 and

TheaterWide 3 modes for each input.

To set the scroll settings:

1Press M_uand open the Video menu.

2Highlight Theater Settings and press @.

_ici,Ji;s;iii,,gs ;;;

•,•ENTER• C_RTtl:• EXIT

3In the Picture Size field, select either TheaterWide 2

or TheaterWide 3 (you cannot scroll in any other mode).

4Pregg • to highlight the Picture Scroll field.

5Press • or l_"to scroll the picture up and down as needed,

from -10 to +20.

6To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

HM66 (E/F) Web 213:276

HM66 ENbook Page 29 Thursday February 23. 2006 2:49 PM

Usingthe autoaspectratiofeature

When the auto aspect ratio feature is set to On, the picture size

is automatically selected when one of the following input

sources is received:

•A 480i signal from the VIDEO 1, VIDEO 2, ColorStream

HD-1, or ColorStream HD-2 input.

• A 1080i, 480i, 480p, or 720p signal fiom the HDMI input.

4:3 normal Natural (with sidebars)

4:3 letter box TheaterWide 2

16:9 full Full

Not defined

(no ID-I data

or HDMI Selecting the picture size (ir_, page 27)

aspect data)

Note: Theauto aspect ratio feature is not applicable to

antenna or cable input sources.

To turn on tile auto aspect ratio feature:

1Press M_uand open the Video lnenu.

2Highlight Theater Settings and press @.

3 In the Auto Aspect Ratio field, select On.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiRe,e,iiiiiiiiiiiiiiiiiiiiDone

To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Selectingthe cinemamode

(480i signalsonly)

When you view a DVD (480i signal; 3:2 pulldown processed)

from a DVD player connected to the VIDEO 1, VIDEO 2,

ColorStream HD-1/HD-2 (component video), or HDMI

inputs on the TV, smoother motion can be obtained by setting

the Cinema Mode to Film.

To set the Cinema Mode to Film:

1Press M_uand open the Video menu.

2Highlight Theater Settings and press @.

3In the Cinema Mode field, select Film.

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

To set the Cinema Mode to Video:

Select Video in step 3 above.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 30 Thursday February 23. 2006 2:49 PM

Adjustingthe picture

Selecting the picture mode

You can select your desired picture settings from t_)ur different

modes, as described below.

Sports Bright and dynamic picture (factory setting)

Standard Standard picture settings (factory setting)

Lower contrast for darkened room dactory

Movie setting)

Preference Your personal preferences

To select the picture mode using the menu system:

1Press My_uand open tile Video menu.

2Highlight Picture Settings and press @.

3 In the Mode field, select the picture mode you prefer.

Sharpness

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

Notes:

•The picture mode you select affects the current input

only (ANT 1 in the example above). You can select a

different picture mode for each input.

• tfyou select one of the factory-set picture modes

(Sports, Standard, or Movie) and then change a

picture quality setting (for example, increase the

contrast or change the color temperature), the picture

mode automatically changes to Preference in the

Picture Settings menu.

• if you have previously set the TV to High Bright mode,

and have chosen Reset in item 4 above, the TV will

default to Low Power mode. To set the TV back to High

Bright mode, see page 42.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color,

tint, and sharpness) to your personal preferences.

contrast lower higher

brightness darker lighter

color paler deeper

tint reddish greenish

sharpness softer sharper

To adjust the picture quality:

Press M_uand open the Video menu.

Highlight Picture Settings and press @.

Press •or • to select the picture quality you want to

adjust (Contrast, Brightness, Color, Tint, or

Sharpness), and then press • and • to adjust the setting,

as described in the table above.

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

The picture qualities you adjusted are automatically saved in

the Preference mode (_ "Selecting the picture mode,"

above left).

HM66 (E/F) Web 213:276

HM66 ENbook Page 31 Thursday February 23. 2006 2:49 PM

Usingthe closedcaptionmode

The closed caption mode has two options:

•Captions--An on-screen display of the dialogue, narration,

and sound effects of TV programs and videos that are closed

captioned (usually marked "C(7' in proglam guides).

• Text--An on-screen display of information not related to

the current program, such as weather or stock data (when

provided by individual stations).

To view captions or text:

1Press M_u and open the Preferences menu.

2Highlight Closed Caption Mode and press •.

3 Press • or • to select the desired closed caption mode and

press @.

To view captions:

Highlight CC1, CC2, CC3, or CC4. (CC1 displays

translation of tile primary language in your area.)

Note: tf the program or video you selected is not closed

captioned, no captions will display on-screen.

To view text:

Highlight T1, T2, T3, or T4.

Note: If text is not aw_ilable in your area, a black rectangle

may appear on your screen. If this happens, tum the

Closed Caption Mode Off.

To turn off the Closed Caption mode:

Select Off in step 3 above.

Note: A closed caption signal may not display in the following

situations:

•When a videotape has been dubbed

• When the signal reception is weak

• When the signal reception is non-standard

Closed Caption Advanced

You can customize the closed caption display characteristics

by changing the text size, type, edge, color, and the

background color. You cannot set the Caption Text and

Background as the same color.

Notes:

•This feature is available for digital channels only.

• You cannot set the Caption Text and Background as the

same color.

To customize the closed captions:

Press Mff_uand open the Preferences menu.

Highlight Closed Caption Advanced and press @.

Press •or • to highlight the characteristic you want to

change, and then press • or • to select the format for that

characteristic.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii .....................

................................................................................Reset Done

To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

Caption Size Auto, Small, Standard, Large

Auto, Del:ault, Mono w. Serif. Prof. w. Serif'.

Caption Text Mono w/o SeriL Prop w/o SeriL Casual,

Type Cursive, Small Capitals

Caption Text Auto, None, Raised, Depressed, Uniform,

Edge Left Drop Shadow, Right Drop shadow

Caption Text Auto, Black, White, Red, Green, Blue,

Color Yellow, Magenta, Cyan

Background Auto, Black, White, Red, Green, Blue,

Color Yellow, Magenta, Cyan

HM66 (E/F) Web 213:27(

HM66 ENbook Page 32 Thursday February 23. 2006 2:49 PM

Digital closed captions

You can use the Digital CC/Audio Selector to select digital

closed caption services (if available), which will temporarily

ovenide closed captions for digital channels only.

When such services are not available, the Digital CC/Audio

Selector presents a default list of services. If the selected

service is not available, the next best service will be used

instead.

To select digital closed captions:

1Press M_Uand open tile Applications menu.

2Highlight Digital CC/Audio Selector and press @.

CableCARD

. • EN_R • CHRrN= Exrr

3Press • or • to select Closed Caption, and then press

• or • to select the desired service.

!!!!!!!!!!!!!!!!!!_!_ii¸¸2222222222:

4Press=c/.

None

Adjustingthe audio

Muting the sound

Press M_Eto partially reduce (1/2 MUTE) or turn off (MUTE)

S S MUTE

the sound. Each time you press ©, the mute mode wdl change

in the following order:

[---l/2 Mute ------*Mute ------*Volume --*-'7

If the closed caption mode is set to Off when you select

"MUTE" mode, the closed caption feature is automatically

activated. To mute the audio without automatically actiwtting

the closed caption feature, use _ to set the volume to 0. See

"Using the closed caption mode" (ir_ page 31 )

for more information on closed caption modes.

Usingthe digital audio selector

You can use the Digital CC/Audio Selector to conveniently

switch between audio tracks on a digital channel (for those

channels that have multiple audio tracks). This temporarily

overrides the audio track chosen by the language option under

Audio Setup (see "Selecting stereo/SAP broadcasts," on

page 33).

To use the digital audio selector:

1Press M_Uand open the Applications menu.

2Highlight Digital CC/Audio Selector and press @.

!x'

ii!Cham/e_Browser iii

iiiC_b_CARE' iiii

• .• • _N_R • • CH_l =• Exrr

3Press • or • to select Audio, and then press • or • to

select the desired service.

4PressE_'_.

HM66 (E/F) Web 213:276

HM66 ENbook Page 33 Thursday February 23. 2006 2:49 PM

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to

output high-fidelity stereo sound. MTS also can transmit a

second audio program (SAP) containing a second language,

music, or other audio information (when provided by

individual stations).

The MTS feature is not available when the TV is in VIDEO

mode. When the TV receives a stereo or SAP broadcast, the

word "STEREO" or "SAP" appears on-screen when RE_LLis

pressed.

To listen to stereo sound:

1Press u_u and open tile Audio menu.

2Highlight Audio Setup and press @.

3In the MTS field, select Stereo.

Language

Speakers

4To save the new settings, highlight Done and press @.

To reset the settings to the factory defaults, highlight

Reset and press @.

Notes:

•tfyou leave the TV in Stereo mode because it will

automatically output the type of sound being broadcast

(stereo or monaural).

• If the stereo sound is noisy, select Mono to reduce the

noise.

To listen to an alternate language on an ATSC digital

station (if available):

Highlight the Language field in step 3 above, and then press

• or • to select the language you prefer.

To listen to a second audio program on an analog

station (if available):

Select SAP in step 3 above.

Notes:

°Asecond audio program (SAP) can be heard only on those

TV stations that offer it. For example, a station might

broadcast another language as a second audio program. If

you have SAP on, you will see the current program on the

screen but hear the other language instead of the program's

normal audio.

• tfyou have SAP on and the station you are watching is not

broadcasting a second audio program, the station's normal

audio will be outpuL However, occasionally there is no

sound at all in SAP mode. tf this happens, set the MTS

feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,

and balance.

To adjust the audio quality:

1Press M_uand open the Audio menu.

2Highlight Audio Settings and press @.

3Press • or • to highlight the item you want to adjust

(Bass, Treble, or Balance).

4Press • or • to adjust the level.

•_makes the bass or treble weaker or increases the

balance in the left channel (depending on the item

selected).

° • makes the bass or treble stronger or increases the

balance in the right channel (depending on the item

selected).

5To save the new settings, highlight Done and press @.

To reset the settings to the factory defaults, highlight

Reset and press @.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 34 Thursday February 23. 2006 2:49 PM

Usingthe StableSound®feature

Tile StableSound _ feature limits tile highest volume level to

prevent extreme changes in volume when the signal source

changes (for example, to prevent the sudden increase in

volume that often happens when a TV program switches to a

commercial).

To turn on the StableSound _ feature:

1Press M_uand open the Audio menu.

2Highlight Audio Settings and press @.

3 In the StableSound field, select On.

Bass 10o

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

Note: The RESET function returns your audio adjustments

to the following factory settings:

Bass ......... center (50)

Treble ........ center (50)

Balance ...... center (0)

StableSound... Off

To turn off the StableSound feature:

Select Off in step 3 above.

Turning off the built-in speakers

You can use this feature to turn off the TV speakers when you

connect an audio system to your TV (_ "Connecting a digital

audio system" and "Connecting an analog audio system" in the

hlsmllation Guide).

To turn off the built-in speakers:

IPress Mff_uand open the Audio menu.

2Highlight Audio Setup and press @.

3In the Speakers field, select Off.

Opticat Outpul Format DoJby Digital

4To save the new settings, highlight Done and press @.

To revert to the ti_ctorydelimits, highlight Reset and

press 0.

To turn on the built-in speakers:

Select On in step 3 above.

Selecting the optical audio output format

You can use this feature to select the optical audio output

format when you connect a Dolby Digital decoder or other

digital audio system to the Optical Audio Out terminal on

the TV

(Ir__ "Connecting a digital audio system" in the Installation

Guide).

To select the optical audio output format:

IPress Mff_uand open the Audio menu.

2Highlight Audio Setup and press @.

3In the Optical Output Format field, select either

Dolby Digital or PGM, depending on your device.

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

HM66 (E/F) Web 213:276

HM66 ENbook Page 35 Thursday February 23. 2006 2:49 PM

Usingthe Locksmenu

The Locks menu includes the Enable Rating Blocking, Edit

Rating Limits, Channels Block, Input Lock, Front (control)

Panel Lock, and New PIN Code features. You can use these

features after entering the conect PIN code.

Entering the PIN code

1Press M_uand highlight the Locks menu icon.

Front Pane_ Lock Otf

New PIN Code

E_ER • _Rm :EXIT

Press •, which displays tile PIN code entry screen.

•The Lock System screen (below) appears if a PIN

code has not been stored. Press the Channel Number

buttons to enter a new four-digit code, enter the code a

second time to confirm, and press @.

Tile Locks/Active screen (below) appears if tile PIN

code is already stored. Use the Number buttons to enter

your four-digit code and press @.

If the wrong PIN code is entered, tile message "Incorrect PIN

code, please try again!" appears. Highlight Retry and press

@. Enter the code again and press @.

When tile correct PIN code is entered, tile Locks menu opens.

Edit Rating Limits

Input Lock Oif

ii New PIN Code i

If you cannot remember your PIN code

"S_ RECALLWllile tile PIN code enterin_ screen is displayed, pie.. O

four times witllin five seconds. Tile PIN code will be cleared

and you can enter a new PIN code.

Changingyour PIN code

1Press M_uand highligllt tile Locks menu icon.

2Press • to display the PIN code entering screen.

3Enter your four-digit PIN code and press ,@.

4Press • to highlight New PiN Code and press @.

_R • • _E_U : EXIT

5Press tile Number buttons to enter a new four-digit code.

Retype the numbers to confirm the PIN code you entered.

6Press @. The new PIN code is now active.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 36 Thursday February 23. 2006 2:49 PM

BlockingTV programsandmovies

byrating(V-Chip)

Some TV programs and movies include signals that classify

the content of the proglam (violence, sex, dialog, language).

The V-Chip feature in this TV detects the signals and blocks

the programs according to the ratings you select. (See the

tables at below right for rating descriptions.)

Note: Rating blocking is a function of the V-Chip feature in this

TV, which supports the U.S. V-Chip system only.

To block and unblock TV programs and movies:

1Press Mff_uand highlight tile Locks menu icon.

2 Press • to display the PIN code entering screen.

3 Enter your four-digit PIN code and press @.

4 Press • to highlight Enable Rating Blocking.

5Press • and • to select On, and press @.

FrontPane_ Lock Oft

Press • to highlight Edit Rating Limits and press ,4_.

The Edit Rating Limits screen (below) appears.

Press ••• • and then press ,@ to select the level of

blocking you prefer. A box with an "X" is a rating that will

be blocked. As you highlight a rating, a definition for the

rating appears at the bottom of the screen.

When done selecting the ratings you want to block,

higMight Done and press ,@.

iiiii¸

Blocking TV programs and movies by alternate

ratings:

The alternate rating system is provided by some broadcasters

as a supplement the standard V-Chip ratings. This system is

dependant on the broadcaster's information.

1 Repeat steps 1-6 above.

2Highlight AIt RS and press ,@. The Edit Alternate

Ratings screen will appear. (This button will only be

awulable it your television has detected that the

broadcaster is send alternate ratings with that program.)

3Press • • • • and then press @ to select the level of

blocking you prefer. A box with and "X" is a rating that

will be blocked. (The information contained within this

menu window will depend on what the broadcaster is

providing.)

4 When done selecting the ratings you want to block,

highlight Done and press @.

5 In the Edit Rating Limits screen, highlight Done and

press @.

Note: The above illustration is example data only. The

Alternate Ratings screen on your TV may not look the same.

Independent rating system for broadcasters

R_!ifi_

MatureAudience Only (This program is specifically

designed to be viewed by adults and therefore may

TV-MA be unsuitable for children under 17.)

L) Crude or indecent language S) Explicit sexual

activity V) Graphic violence

Parents Strongly Cautioned (This program contains

some material that many parents would find

unsuitable for children under 14 years of age.)

TV-14 D) Intensely suggestive dialog L) Strong, coarse

language S) Intense sexual situations V) Intense

violence

ParentalGuidance Suggested (This program

contains material parents may find unsuitable for

TV-PG younger children.)

D) Some suggestive dialog L) Infrequent coarse

language S) Some sexual situations V) Moderate

violence

General Audience (Most parents would find this

TV-G program suitable for all ages.)

Directedto Older Children (This program is designed

TV-Y7, for children age 7 and above. Note: Programs in

TV-Y7 FV which fantasy violence maybe more intense or more

combative than other programs in this category are

designated Y7FV.)

All Children (This program is designed to be

TV-Y appropriate for all children.)

HM66 (E/F) Web 213:276

HM66 ENbook Page 37 Thursday February 23. 2006 2:49 PM

Independentratingsystemlor movies

XX-rated (For adults only)

NC-17 Not intended for anyone 17 and under

R Restricted (Under 17 requires accompanying parent

or adult)

PG-13 Parents Strongly Cautioned (Some material may be

inappropriate for children under 13)

PG Parental Guidance Suggested (Some material may

not be suitable for children)

G General Audience (Appropriate for all ages)

Notes:

•tfyou place an 'X" in the box next to "'None" Rated,"

programs rated "None" will be blocked, however, programs

that do not provide any rating information will not be

blocked.

°Todisplay the rating of the program you are watching, press

RECALL

oon the remote control, tf it is rated "None, the word

"NONE"appears in the RECALL screen (as shown below

right). If rating information is not provided, no rating will

appear in the RECALL screen.

Blocking channels

With tile Channels Block feature, you can block specific

channels. You will not be able to tune blocked channels unless

you clear the setting first.

To block channels:

1Press Mff_uand highlight tile Locks menu icon.

2Press • to display the PIN code entering screen.

3Enter your four-digit PIN code and press @ (ir_ page 35).

4 Press • to highlight Channels Block and then press @.

Input Lock O!f

Front Pane_ Lock Otf

!!! New PIN Code iii

Using A•'4 I_ buttons, select the input for which you

want to change the rating limits (ANT1, or ANT2) and

press @.

A list of the channels available for that input will be

displayed along with the call letters for each channel, if

available.

Press A• to lfiglfiight the channel you want to block, and

press ,@, which puts an "X" in the box next to that

channel.

2 _--

[] 4 --

[]

[] _ --

D;2;;n_;i

Repeat step 6 for other channels you want to block.

HigMight Done and press @.

To unblock individual channels:

In step 6 above, press A• to highlight the channel you want to

unblock, and then press @ to remove the "X" from the box,

and then highlight Done, and then press @.

To block all channels at once:

Highlight Block All in step 6 above, and then highligllt Done,

and press @.

To unblock all locked channels at once:

Highlight Allow All in step 6 above, and then highlight Done

and press @.

O ANT 2

[]

(con tin ued)

HM66 (E/F) Web 213:27(

HM66 ENbook Page 38 Thursday February 23. 2006 2:49 PM

Unlocking programstemporarily

If you try to tune the TV to a prograln that exceeds the rating

limits you set, the TV will enter program lock mode and the

following message will appear on-screen:

You can either temporarily unlock the program or select an

unlocked program to watch.

To temporarily unlock the program:

Press MUTEc),

Enter your four-digit PIN code and press @. If the correct

code is entered, the program lock mode is released and the

normal picture appears. All locking is disabled until the

TV is turned off, and will be enabled when the TV is

turned on again.

Usingthe input lock feature

You can use the Input Lock feature to lock the video inputs

(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream

HD-2, HDMI 1, and HDMI 2) and channels 3 and 4. You will

not be able to view the input sources or channels until you

unlock the inputs.

To lock/unlock the video inputs:

Press M_u and highlight the Locks menu icon.

Press • to display the PIN code entering screen.

Enter your four-digit PIN code and press @.

Press • to highlight Input Lock and press I_.

Press •or• to select the level of video input locking you

prefer, as described below.

Video: Locks VIDEO 1, VIDEO 2, ColorStream HDI/

HD2, HDMI I/HDMI 2.

Video+: Locks VIDEO 1, VIDEO 2, ColorStream HDI/

HD2, HDMI I/HDMI 2, and channels 3 and 4.

• Select Video+ if you play video tapes via an ANT input.

• When a CableCARD TM is inserted, Video+ will not

lock channels 3 and 4.

Off: Unlocks all video inputs and channels 3 and 4.

6Press @.

HM66 (E/F) Web 213:276

HM66 ENbook Page 39 Thursday February 23. 2006 2:49 PM

Usingthe control panel lock feature

You can lock the control panel to prevent your settings flom

being changed accidentally (by children, for example). When

the control panel lock is On, none of the controls on the TV

control panel will operate except POWER.

To lock the control panel:

1Press M_uand highlight tile Locks menu icon.

2Press • to display the PIN code entering screen.

3Enter your four-digit PIN code and press (/_.

4 Press • to highlight Front Panel Lock.

5Press • and • or • to highlight On and press @. When

the control panel is locked and a button on the control

panel except POWER button is pressed, the message

"NOT AVAILABLE" appears.

Channels Block

Input Lock

To unlock the control panel:

Highlight Off in step 5 above, or press and hold the

VOLUME -button on the TV control panel for about 10

seconds until the volume icon appears on-screen.

Settingthe sleeptimer

You can set the sleep timer to turn offthe TV after a set length

of time (maximum of 180 minutes).

To set the sleep timer:

SLFEEP

Press o on the remote control to set the length of time until

ss sLFE_EP

the TV turns oft\ Repeatedly pre._'s o to increase the time in

10-minute increments or press • or • to increase or decrease

the time in 10-minute increments, to a maximum of 180

minutes.

To cancel the sleep timer:

SLFEEP

Press o until it is set to 0 minutes.

To set the sleep timer using the on-screen menus:

1Press M_uand open the Setup menu.

2 Highlight Sleep Timer and press,@.

ENrE_ •C_RrN:, EXff

Press the Number buttons to enter the length of time in

10-minute increments.

HHHHHHH

HHHHHHHCancel

4Highlight Done and press @.

Notes:

•When a power failure occurs, the sleep timer setting

may be cleared.

• To display the amount of time left on the sleep timer,

press _L.

To display the remaining sleep time:

Press SLEEPer).

Note: A message will display on-screen when there is one

minute remaining on the sleep timer.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 40 Thursday February 23. 2006 2:49 PM

DisplayingTV settinginformation

on-screenusingRECALL

To display TV setting information on-screen:

Press RE_L_on tile remote control.

The following int_rmation will display on-screen

(if applicable):

Sample RECALL screen

Current input (ANT 1, ANT 2, VIDEO 1, etc.)

If ANT 1 or ANT 2 is the current input, whether it is Cable

TV ("CABLE") or off-air ("TV")

Channel number (if in ANT 1or ANT 2 mode)

Signal strength indicator (bar graph in lower right corner of

screen; for ATSC signal only)

Note: The signal strength indicator will react to fading and

increasing signals.

Remaining time on sleep timer (if set)

Stereo or SAP audio status

V-Chip rating status

Picture size

Video resolution

Lamp mode (appears only if the TV is in High Bright mode)

To close the RECALL screen:

Press RE_L_again.

Understandingthe auto poweroff

feature

The TV will automatically turn itself off after approximately

15 minutes if it is tuned to a vacant channel or a station that

completes its broadcast for the day. This feature functions in

ANT 1 and ANT 2 modes only.

Understandingthe last mode

memory feature

If the power is cut off while you are viewing the TV, the

Last Mode Memory feature automatically turns on the TV

when the power is resupplied.

Note: You should unplug the TV's power cord if it is possible

that you will be away from the TVfor an extended period of time

after the power is restored.

HM66 (E/F) Web 213:276

HM66 ENbook Page 41 Thursday February 23. 2006 2:49 PM

Usingtheadvancedpicturesettings

features

Usingdynamic contrast

When dynamic contrast is set to On, the TV will detect

changes in the picture quality that affect the appearance of your

contrast settings and then automatically adjust the video.

When dynamic contrast is set to Off, the settings selected in the

Contrast field in Picture Settings will be used.

To select dynamic contrast preferences:

1Press M_uand open tile Video menu.

2Highlight Advanced Picture Settings and press @.

3In the Dynamic Contrast field, select either On or Off.

NNNNNNNNNNNNNNNNNIIi!Reset iiiiiiiiiiiiiiii Done iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

To save the new settings, highlight Done and press @. To

revert to the factory defaults, highlight Reset and press

Note: If you select the Movie picture mode and then set

the dynamic contrast to On, the picture mode will

automatically change to Preference in the Picture

Settings menu.

UsingCableClear /DNR (digital noise

reduction)

The CableClear _?digital noise reduction feature allows you to

reduce visible interference in your TV picture. This may be

useful when receiving a broadcast with a weak signal

(especially a Cable channel) or playing a noisy video cassette

or disc.

To change the CableClear/DNR settings:

Press _u and open the Video menu.

HigMight Advanced Picture Settings and press @.

In the CableClear/DNR field, select your desired

setting.

Dynamic Contrast Or}

iiiiii ColorTemperature

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiRese_ iiiiiiiiiiiiiiii Do_e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_!i

Notes:

•ffthe currentinputisANT 1, ANT2, VIDEO 1, or VIDEO

2, the menu will display the text "CableClear. " The

available selections are Off, Low, Middle, High, and

Auto.

•if the current input is ColorStream HD1, ColorStream

HD2, or HDMI, the menu wi// display the text DNR The

available selections are Off, Low, Middle, High and

Auto. Auto will react proportionally to the strength of

the noise. Low, Middle, and High will reduce the noise

in varying degrees, from lowest to highest, respectively.

To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

UsingMPEGnoise reduction

The MPEG noise reduction feature allows you to reduce

visible interference caused by MPEG compression. Choices

for MPEG noise reduction are Off, Low, Middle, and Nigh. Off

is automatically selected when this feature is disabled ("grayed

out").

To select the MPEG noise reduction level:

1Press _u and open the Video menu.

2Highlight Advanced Picture Settings and press @.

Press • or • to highlight the MPEG Noise Reduction

field, and then press • or • to select either Off, Low,

Middle or High.

Dynamic Contrast On

Lamp Mode Low Power iiiiii

Game Mode Off

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ iiiiiiiiiiiiiili iiiiiiiiiiii iiili iiiii

Reset Done

To save the new settings, higMigl-a Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

(con tin ued)

HM66 (E/F) Web 213:27(

HM66 ENbook Page 42 Thursday February 23. 2006 2:49 PM

Selecting the color temperature

You can change tile quality of tile picture by selecting flom

three preset color temperatures (cool, medium, and warm), as

described below.

cool blueish

medium neutral

warm reddish

To select the color temperature:

1Press M_uand open tile Video menu.

2Highlight Advanced Picture Settings and press @.

3 In the Color Temperature field, select the mode you

prefer (Cool, Medium, or Warm).

CableClear Auto

MPEG Noise Reduction Low

iiiii iiii!i!

Lamp Mode LOW Power

Game Mode Off

Reset Done

To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

Note: tf you se/ect one of the factory-set picture modes

(Sports, Standard, or Movie) and then change the co/or

temperature mode, the picture mode automatica//y

changes to Preference in the Picture Settings menu.

Selecting the lamp mode

You can select either the High Bright or Low Power lamp

mode.

• The High Bright mode is useful when additional picture

brightness is desired (such as in a bright room).

To select the lamp mode:

1Press M_uand open the Video menu.

2Highlight Advanced Picture Settings and press @.

• _ • _N_R • 0HFtl =• Exrr

In the Lamp Mode field, select High Bright or Low

Power, whichever you prefer.

CableClear Auto

MPEG Noise Reduction Low

Color Temperature Cool

Game Mode Off

Reset Done

To save the new settings, higMight Done and press @.

To revert to the factory defaults, higMight Reset and

press @.

Note: ff you set the/amp mode to Low Power, each time

you turn on the TV, the/amp wi// start out in High Bright

mode but wi// switch to Low Power mode after a short

period of time, You may notice a change in screen

brightness when this happens. This is norma/ and is not a

sign of ma/function.

HM66 (E/F) Web 213:276

HM66 ENbook Page 43 Thursday Februar,¢ 23. 2006 2:49 PM

Usingthe Game Mode feature

You can use tile Game Mode feature for shorter fralne delays

when playing a video game requiring split-second timing

between the on-screen display and input t¥om the controller

(such as music creation and high-action games).

Note: To use the Game Mode feature, the current video input

must be Video 1, Video 2, ColorStream HD1,

ColorStream HD2, HDMI 1 or HDMI 2. The Game Mode

cannot be turned on when any other video input is selected.

To turn on Game Mode:

1Press Mff_uand open the Video menu.

2Highlight Advanced picture settings and press @.

3 Press • or • to highlight the Game Mode field, and then

press • or • to select On.

Resel Done

To turn off Game Mode:

Select Off in step 3 above or change the video input.

You can change the video input in any of the following ways.

•pressing _on the remote control (Ir_'rpage 23);

CH OH RTN

• changing the channel using the Numbers or (_/_J, o,

"_i4, _, I_, orFAVA/FAVV,

• Turning the TVoffand back on again will set Game Mode to

Off.

Usingthe advancedaudiosettings

features

Usingthe SRSWOW Msurroundsound

feature

WOW TM is a special combination of SRS Labs audio

technologies (SRS 3D, SRS FOCUS, and SRS TruBass) that

creates a thrilling surround sound experience with deep, rich

bass from stereo sound sources. Your TV's audio will sound

fuller, richer, and wider.

To adjust the WOW TM settings:

Put the TV in STEREO mode (ir_ "Selecting stereo/SAP

broadcasts" page 33).

Press Mff_uand open the Audio menu.

Highlight Advanced Audio Settings and press @.

Press • or • to highlight the WOW feature you want to

adjust, and then press • or • to adjust the item.

WOW: SRS TruBass Low

• WOW: SRS 3D -- To turn the surround sound effect

On or Off.

Note: If the broadcast is monaural, the SRS 3D effect will

not work.

• WOW: SRS Focus -- To turnthe vocal emphasis effect

On or Off.

• WOW: SRS TruBass -- To select the desired bass

expansion level (Off, Low, or High).

To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press 0.

WOW, SRS and Ce) symbol are trademarks of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 44 Thursday February 23. 2006 2:49 PM

Generaltroubleshooting

Before calling a service technician, please check this entire

chapter for a possible cause of the problem and some solutions

you can try.

Black box on screen

• The Closed Caption feature is set to one of the Text

modes (T1, T2, T3, or T4). Set the Closed Caption

feature to Off (t_¢ page 31).

TV plays a recorded anouncement when LEDs are blinking

• When certain non-standard conditions occur, the LEDs

on the TV will blink and the TV will play a recorded

"voice announcement" describing the condition (see

"LED indications" on page 46 for details).

TV stops responding to controls

• If the TV stops responding to the controls on the remote

control or TV control panel and you cannot turn off the

TV, press and hold the POWER button on the TV control

panel for 5 or more seconds to reset the TV.

Other problems

• If your TV's problem is not addressed in this

Troubleshooting section or the recommended solution

has not worked, use the Restore Factory Defaults

procedure (zr_ page 22).

TV will not turn on

Make sure the power cord is plugged in, and then press

POWER

G -

The remote control batteries may be dead. Replace the

batteries or try the control panel buttons.

If you have recently replaced the lamp unit, make sure the

lamp unit and lamp unit door are installed properly

(re" pages 47 49).

The lamp unit may need to be replaced (re" pages 47 49).

Also see "LED indications" (t_¢ page 46).

If the TV is powered off and then quickly on again when

the lamp unit is hot, it may take several minutes for the

picture to appear on-screen. This is a property of DLP TV

lamp technology and is NOT a sign of malfunction. For

details, see IMPORTANT NOTICE ABOUT "HOT

LAMP RESTART" (r_ page 2).

Picture problems

General picture problems

• Check the antenna/cable connections (t_ "hTsmllation

GuMe).

• tS"ess _) on the remote control or INPUT on the TV

control panel and select a valid video input source

(re' page 23). If no device is connected to any of the

inputs on the TV, no picture will display when you select

that particular input source. For device connection

details, see the Installation GuMe.

• Antenna reception may be poor. Use a highly directional

outdoor antenna (if applicable).

• The station may have broadcast difficulties. Try another

channel.

• Adjust the picture qualities (re" page 30).

• If you are using a VCR, make sure T_R on the remote

control is set correctly (rg' page 9).

• If you have two VCRs connected to your TV, make sure

you have not connected the same VCR to the TV's output

and input connections at the same time (_' hTsmllation

Guide).

• Do not connect both a standard video cable and an S-

video cable to the same set of VIDEO inputs (VIDEO t,

or VIDEO 2) at the same time (r_" installation GuMe).

Noisy picture

• If you are watching a tuned analog channel (off-air

broadcast or Cable TV), set the CableClear®/DNR

feature to AUTO to reduce visible interference in the TV

picture (t_ page 41).

Video Input Selection problems

• If the Input Selection window does not appear when

you press @ on the remote control or INPUT on the TV

control panel, press _) a second time, which will change

to the next video input source and display the Input

Selection window.

Cannot view external signals or channel 3 or 4

• If you cannot view signals from external devices

connected to VIDEO 1, VIDEO 2, or ColorStream0fi

or from channels 3 or 4, make sure the Input Lock is set

to Off (re" page 38).

Poor color or no color

• The station may have broadcast difficulties. Try another

channel.

• Adjust the Tint and/or Color (r_> page 30).

• When the ColorStream ® signal source is active, the

VIDEO OUT terminal outputs blank video. To receive

video from the VIDEO OUT signal, a standard video or

S-video IN terminal must be used instead of the

ColorStream 0'_connections.

Picture brightness changes soon after turning on TV

• If you set the lamp mode to Low Power, each time you

turn on the TV, the lamp will start out in High Bright

mode but will switch to Low Power mode after a short

period of time. You may notice a change in screen

brightness when this happens. This is normal and is not a

sign of malfunction (t_¢"page 42).

Poor composite or S-video picture

• If the TV is connected to an external A/V device (e.g.,

DVD player, video game system, set-top box, etc.) try

using a ColorStream or HDMI video connection

instead.

Picture and sound are out of sync

• As with all products that contain a digital display, in rare

instances, when viewing certain content (e.g.. television

broadcasts, video games, DVDs), you may notice that the

sound and picture are slightly out of sync. This

phenomenon can be caused by various factors including,

without limitation, video processing within the TV, video

processing in an attached gaming system, and video

processing or different compression rates used by

broadcasters in their programming. You may want to try

one or more of the following suggestions, which may

help to reduce the effect of this phenomenon:

HM66 (E/F) Web 213:276

HM66 ENbook Page 45 Thursday February 23. 2006 2:49 PM

i iii i _ iiii

- If the TV is connected to an A/V receiver that has a

programmable audio delay feature, use this feature

to help synchronize the sound to the picture.

- If you notice this phenomenon only on certain TV

channels, please contact your local broadcast,

cable, or satellite provider to inform them of this

issue.

Sound problems

•Check the antenna/cable connections (_s'r Installation

GuMe).

• The station may have broadcast difficulties. Try another

channel.

• The sound may be muted. Press _.

• If you hear no sound, try setting the MT$ feature to

Stereo mode (r_ page 33).

• Make sure the Speakers function in the Audio Setup

menu is set correctly (t_ _page 34).

• If you are not receiving asecond audio program from a

known SAP source, make sure the MT$ feature is set to

SAP mode (_' page 33).

• If you hear audio that seems "incorrect" for the program

you are watching (such as music or a foreign language),

the SAP mode may be on. Set the MT$ feature to Stereo

mode (r<r _page 33).

• When using an external audio amplifier, if you connect

the amplifier to the VAR. AUDIO OUT terminals, the

volume of the TV and amplifier must be set above 0 or

you will not hear any sound (re Installation GuMe).

Remote control problems

•Make sure the remote control is set to the correct device

mode (re pages 9-10).

• Remove all obstructions between the remote control and

the TV.

• The remote control batteries may be dead. Replace the

batteries (r_ page 7).

• Your TV remote control may not operate certain features

on your external device. Refer to the owner's manual for

your other device to detennine its available features. If

your TV remote control does not operate a specific

feature on another device, use the remote control that

came with the device (r_' pages 9 13).

• If the TV still does not act as expected, use the Restore

Factory Defaults procedure (r_ page 22).

Channel tuning problems

• Make sure the remote control is set to the correct device

mode (re' page 8).

• The channel may have been erased from the channel

memory by the Channel Add/Delete feature. Add the

channel to the channel memory (r_ page 17).

• The channel may be blocked by the Channels Block

feature. Unblock the channel (re" page 37).

• If you are unable to tune digital channels, check the

antenna configuration (t_¢ page 16). If you are still

unable to tune digital channels, clear all channels from

the channel list (t_¢' page 18) and reprogram channels into

the channel memory (r_ page 17). If you are still unable

to tune digital channels, use the Restore Factory Defaults

procedure (r_ page 22). Also see "TV stops responding

to controls" and "Other problems" (re" page 44).

Closed caption problems

If the program oz"video you selected is not closed-

captioned, no captions will display on-screen

(re" page 31).

If text is not available, a black rectangle may appear on-

screen. If this happens, turn off the closed caption feature

(t_¢ page 31).

A closed caption signal may not display correctly in the

following situations: a) when a videotape has been

dubbed: b) when the signal reception is weak: or c) when

the signal reception is nonstandard (r_ page 31).

Rating blocking (V-Chip) problems

•If you forget your PIN code: While the PIN code entering

• • RECALL

screen is displayed, press 0four times within 5

seconds. The PIN code you previously stored will be

cleared (r_ page 35).

• The V-Chip feature is available for the U.S. V-Chip

system only (_" page 36).

HM66 (E/F) Web 213:27(

HM66 ENbook Page 46 Thursday February 23. 2006 2:49 PM

i iii i _ iiii

LEDindications

Tile yellow blue and red/green LED lights on tile TV (at tile bottom center of the TV) indicate tile TV's status, as described below:

Note: tf the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow

LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

TV front Iiiil'LAMP OWER

HI L?__??

B_ YelbwLED BlueLED Red/GreenLED

"Voice announce" feature

When certain non-standard conditions occur, the LEDs on

the TV will blink and the TV will play a recorded

"voice announcement" describing the condition (see the

table below for the specific conditions that include a voice

announcement).

To repeat the voice announcement and hear additional

information, press the MENU button on the TV while the

LEDs are blinking.

The TV is operating

properly.

In LPS mode (standby

with Quick Restart ON).

The lamp is not working

properly.

See "Setting the Quick Restart TM feature" (_ page 20). -

The TV will automatically try to restart itself eight times

(see item #4).

Note: If the TV is powered off and then quickly on again

when the lamp unit is hot, it may take several minutes

for the picture to appear on-screen. This is a property of

DLP TV lamp technology and is NOT a sign of

malfunction. For details, see "Setting the Quick

Restart TM feature" and "IMPORTANT NOTICE ABOUT

HOT LAMP RESTART" (_. page 21).

_i_

4) Yellow is ON The lamp is not working Turn the TV OFF and then ON again. If the problem

(solid). Red blinks, properly after the eighth "Lamp not

automatic restart (see persists, contact Consume Solutions at working"

1-800-631-3811.

item #3).

5) Yellow is ON The lamp unit door is not Turn OFF the TV and unplug the power cord. Review "Lamp door is

(solid). seated properly. "Lamp unit replacement and care" in Chapter 8 to

ensure that the lamp door is installed securely, open."

Fan stopped

(light engine).

6) Red blinks.

7) Blue is ON (solid).

Green blinks.

8) Blue blinks slowly.

9) Blue blinks quickly.

10)Blue blinks quickly.

Red blinks.

11)Blue blinks quickly.

Yellow blinks.

Red blinks.

Fan stopped (POD).

Turn OFF the TV and unplug the power cord. Plug the

power cord in again and turn ON the TV.

Turn OFF the TV. Check to make sure all slots and

openings in the TV cabinet are not covered, blocked, or

dusty. Turn ON the TV again.

Abnormal operation of

BUS line.

Power Protect

Detection.

The color wheel has

stopped.

An abnormal

temperature increase

has occurred.

"Fan

stopped."

"Fan

stopped."

"Color wheel

stopped."

"Temperature

warning."

If! after trying solutions, the problem still exists:

• In the U.S., call TACP Consumer Solutions at 1-800-631-3811.

• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click

"Home Entertainment," and then click "Support."

HM66 (E/F) Web 213:276

HM66 ENbook Page 47 Thursday February 23. 2006 2:49 PM

Lampunit replacementandcare

Replacing the lamp unit

(User-replaceable component)

WARNING:RISKOF ELECTRIC

SHOCK!

TO REDUCE THE RISK OF ELECTRIC

SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS

SPECIFIED HEREIN. REFER ALL SERVICING NOT

SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE

PERSONNEL. Failure to follow this WARNING may result in

death or serious injury.

The light source for this TV is a mercury lamp with internal

atmospheric pressure that increases during use. The lamp has a

limited service life that varies depending on product use and

user settings.

As is generally the case with all projection TVs that use

projection lamps as a light source, the brightness of the lamp

in this TV may vary somewhat over the expected service life

and will generally decrease over time. Because of the many

variables that can affect the useful selwice life of the lamp, your

experience may vary fiom other users.

Note : The lamp is warranted only for the periods and to the

extent set forth in the Limited Warranty applicable to this set.

See "Limited United States Warranty" (_ page 51) or "Limited

Canada Warranty" (_ page 52), as applicable.

If you use the lamp beyond its service life:

•you may notice a reduction in the colors and/or brightness of

the picture; and

• the strength of the quartz glass in the lamp will be reduced

and the lamp may rupture (often making a loud noise when

this happens), ffthe lamp ruptures, the TV will not operate

until the lamp unit is replaced.

CAUTION:Always handle the lamp unit

with care.

The lamp unit in this TV was designed for safe

replacement by consumers; however, if the lamp unit is

subjected to intentional abuse (such as excessive

mechanical abuse or handling by children or pets), the unit

may break, exposing sharp edges or pinch points.

When to replace the lamp unit

You should replace the lamp unit:

• if the picture darkens and/or colors fade;

• if the screen (lamp) does not light (LED indication #4,

_r_r page 46); or

• if you hear a loud noise and the picture goes black, which

may indicate a lamp rupture (LED indication #4,

_ page 46).

To obtain a replacement lamp unit:

Visit www.tacp.toshiba.com/service or

In warranOv call toll-free 1-800-631-3811.

Visit www.ceaccessories.toshiba.com or

consult your consumer electronics dealer.

Locate a Toshiba parts distributor by visiting

www.toshiba.ca. Click "Home Entertainment" and then

click "Support."

Always replace the lamp unit with the model

currently recommended by Toshiba.

For more information, please contact us at the

telephone numbers listed above, or visit the

websites listed above, as applicable.

Using any lamp other than those recommended by

Toshiba may cause damage to the TV and/or lamp.

SUCH DAMAGE IS NOT COVERED UNDER YOUR

TOSHIBA WARRANTY.

HM66 (E/F) Web 213:27(

HM66 ENbook Page 48 Thursday Februar,t23. 2006 2:49 PM

Howto replace the lamp unit

WARNING:RISKOF ELECTRIC

SHOCK!

TO REDUCE THE RISK OF ELECTRIC

SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS

SPECIFIED HEREIN. REFER ALL SERVICING NOT

SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE

PERSONNEL. Failure to fellow this WARNING may result in

death or serious injury.

Required tools:

• Manual screwdrivers (Phillips and slotted)

• Soft, lint-free gloves

1Turn off tile TV and unplug tile power cord.

WARNING:Eye damage may result from

directly viewing the light produced by

this lamp.

Always turn off the TV and unplug the power cord before

opening the lamp unit door.

2STOP! Allow the lamp to cool for at least one (1) hour

before replacing it.

CAUTION:

HOT SURFACE!

Touching the lamp before it has cooled will result in

severe burns. ALLOW THE LAMP TO COOL FOR AT

LEAST ONE (1) HOUR BEFORE REPLACING IT.

On tile lamp unit door on tile back of the TV, loosen tile

screw by using manual screwdriver, and then remove the

lamp unit door.

TV back Lamp unit door detail

screw

using manual

screwdriver

Using a manual Phillips screwdriver, loosen tile two

screws on tile lamp unit.

Lamp unit screws

WARNING:RISK OF ELECTRIC

SHOCK!

The lamp unit door is provided with an

interlock to reduce the risk of electric shock and excessive

ultraviolet radiation. Never defeat its purpose or attempt

to service without removing the lamp unit door

completely. Failure to follow this WARNING may result in

death or serious injury.

Grasp tile lamp unit handle and gently pull tile lamp unit

straight out of the TV. Set the old lamp unit aside

(_ "Disposing of the used lamp unit" on page 49).

NOTE: Wear soft, lint-free gloves when

replacing the lamp unit.

Carefully insert the new lamp unit straight into the TV

until it is fully seated.

.... j

HM66 (E/F) Web 213:276

HM66 ENbook Page 49 Thursday February 23. 2006 2:49 PM

Notes:

•Never subject the lamp unit to excessive shock.

°Never touch the lamp unit glass or otherwise get it dirty.

Doing so may affect the image quality and reduce the

service life of the lamp. See "Cleaning the lamp unit glass"

below.

CLEANINGTHE LAMP UNIT GLASS

If you accidentally touch the lamp unit glass or otherwise get

it dirty, wipe it with a lin>free lens cleaning cloth (such as a

cloth for cleaning camera lenses or eyeglasses).

CAUTION:NEVER clean a hot lamp with any

type of flammable liquid or aerosol cleaning

agent. Manyordinary cleaningagents(suchas

glasscleaners)containchemicalsthat maybe flammableat

certaintemperatures.Ifthe lamp unitis not allowedto coolfor at

leastone (1) hour,suchchemicalsmayignite.

7Using a manual phillips screwdriver, tighten tile two lamp

unit screws.

Note: Hand-tighten only. Do not use an electric

screwdriver.

S//

XI:2;"

Lamp unit screws

(use manual Phillips screwdriver only)

NOTE : Make sure the lamp unit and screws are

installed securely; otherwise, the TV may not turn

on and the lamp life may be shortened.

8Reattach the lamp unit door, making sure to insert the

hooks on the left side of the lamp unit door inside the

opening in the TV cabinet.

.......

'_STcrt2heeht°°;k2ninnSg! e the _i __/.

Lamp unit door

9Replace tile screw and tighten using a manual

screwdriver.

Lamp unit door

Hand tighten using

manual screwdriver

NOTE: Make sure the lamp unit door is installed

securely; otherwise, the TV may not turn on.

Plug in the power cord and turn on the TV. After the initial

warmup period (which may take several seconds for full

picture brightness), the TV should operate normally. If

any of the following conditions exist, turn offthe TV,

unplug the power cord, and repeat steps 1-9 to ensure that

the lamp unit and lamp unit door are installed correctly:

•No pictum

• Dark picture

• TV will not turn on

IL after repeating steps 1-9, the problem still exists:

• In the U.S., call TACP consumer solutions at 1-800-

631-3811.

• In Canada, locate the nearest Toshiba authorized

smwice depot by directing your web browser to

www.toshiba.ca; click "Home Entertainment," and

then click "Support."

Disposingof the used lamp unit

• Place the used lamp unit in the empty box from the new unit.

• Keep the lamp unit out of reach of children and pets.

CAUTION:Always handle the lamp unit

with care.

The lamp unit in this TV was designed for safe

replacement by consumers; however, if the lamp unit is

subjected to intentional or accidental abuse (such as

excessive mechanical abuse or handling by children or

pets), the unit may break, exposing sharp edges or pinch

points.

• Dispose of the used lamp unit by the approved method for

your area.

NOTE : The lamp unit contains mercury.

Disposal of mercury may be regulated due to

environmental considerations. For disposal or

recycling information, contact your local

authorities or the Electronic Industries Alliance

(www.eiae.org).

HM66 (E/F) Web 213:27(

HM66 ENbook Page 50 Thursday February 23. 2006 2:49 PM

Specifications

Notes:

•This model complies with the specifications listed

below.

•Designs and specifications are subject to change

without notice.

•This model may not be compatible with features and/or

specifications that may be added in the future.

Television System

NTSC standard

ATSC standard (8VSB)

Digital Cable (64 QAM, 256 QAM: in-the-clear,

unencrypted*)

Channel Coverage

VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mid band (A-8 through A-l, A through I)

Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB)

Ultra band (65 through 94, 100 through 135)

Power Source

120 V AC, 60 Hz

Power Consumption

215 W (average)

28 W ill standby mode (using a CableCARD TM)

24 W ill standby mode (without a CableCARD TM)

Audio Power

10W+ 10W

Speaker Type

Main: Two 2-318 x 4-314 inches (6x12 cm) round

Tweeter: Two 1-5116 inches (33 ram) round

Video/Audio Terminals

S-VIDEO INPUT:

Y: 1 V(p-p), 75 ohm, negative sync.

C: 0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k

ohm or greater)

ColorStream ® (component video) HD INPUT:

VIDEO:Y: iV(p-p), 75 ohm

PR: 0.7 V(p-p), 75 ohm

PB: 0.7 V(p-p), 75 ohm

Suggested formats: 1080i, 480p, 480i, 720p

AUDIO: 150 mV(rms), 22 k ohm or greater

HDMI TM INPUT:

HDMI compliant (type A connector)

HDCP compliant

E-EDID** compliant

Suggested formats: 1080i, 48%, 480i, 720p

HDMI Audio: 2-channel PCM: 32144.1148 kHz

sampling frequency; 16120124 bits per sample

VIDEO/AUDIO OUTPUT (also for recording):

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent,

2.2 k ohm or less)

VARIABLE AUDIO OUTPUT:

0-300 mV(rms) (30% modulation equivalent, 2.2 k

ohm or less)

DIGITAL AUDIO OUTPUT:

Optical type

Dimensions

50HM66: Width: 47-3116 inches ( 1,199 ram)

Height: 30-11/16 inches (780 ram)

Depth: 16-5/8 inches (422 ram)

56HM66: Width: 52-3/8 inches (1,330 ram)

Height: 33-3/4 inches (857 ram)

Depth: 18-3/8 inches (467 ram)

Weight

50HM66:64 lbs (29.0 kg)

56HM66:72 lbs (32.7 kg)

Operating conditions

Temperature: 41°F 95°F (5°C 35°C)

Humidity: 2080% (no moisture condition)

Supplied Accessories

• Remote control with two size "AAA" batteries

• Dual-wand IR blaster cable

• Installation Guide

• Operating Guide (this book)

Optional Stands

50HM66:ST 5066

56HM66:ST 5666

Encrypted channels can be viewed on this TV using a

CableCARD. TM (_ Installation Guide).

** E-EDID = Enhanced-Extended Display Identification

HM66 (E/F) Web 213:276

HM66 ENbook Page 51 Thursday February 23. 2006 2:49 PM

LimitedUnitedStatesWarranty

for DLPTM Television Models

ToshibaAmerica Consumer Products,L.L.C. ("TACP")makes the

following limitedwarrantiesto original consumersin the UnitedStates.

THESE LIMITEDWARRANTIESEXTENDTO THE ORIGINAL

CONSUMERPURCHASERORANY PERSONRECEIVINGTHISDLPTM

TELEVISIONAS A GIFT FROMTHEORIGINALCONSUMER

PURCHASERAND TO NOOTHERPURCHASERORTRANSFEREE.

DLPTM TELEVISIONSPURCHASEDINTHE U.S.A.AND USED

ANYWHEREOUTSIDEOFTHE U.S.A.,INCLUDING,WITHOUT

LIMITATION,CANADAANDMEXICO,ARE NOT COVEREDBY THESE

WARRANTIES.

DLPTM TELEVISIONSPURCHASEDANYWHEREOUTSIDEOF THE

U.S.A.,INCLUDING,WITHOUTLIMITATION,CANADAAND MEXICO,

AND USEDIN THEU.S.A.,ARE NOT COVERED BYTHESE

WARRANTIES.

Limited One (1) Year Warranty on Parts and Labor

TACP warrants this DLPTM Television and its parts against defects in

materials or workmanship for a period of one (1) year after the date of

original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S

OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR

REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR

LABOR. During this period, TACP Authorized Service Station personnel

will come to your home when warranty service is required. Depending on

the type of repair required, the service will either be performed in your

home or the DLPTM Television will be taken to a TACP Authorized Service

Station for repair and returned to your home at no cost to you.

Limited One (1) Year Warranty on Lamp Unit

TACP warrants the original lamp unit contained in this DLPTM Television

against defects in materials or workmanship for a period of one (1) year

after the date of original retail purchase. DURING THIS PERIOD, TACP

WILL, AT TACP'S OPTION, EXCHANGE A DEFECTIVE LAMP UNIT

WITH A NEW OR REFURBISHED LAMP UNIT WITHOUT CHARGE TO

YOU. LABOR CHARGES FOR LAMP UNIT REPLACEMENTARE YOUR

RESPONSIBILITY AND ARE NOT COVERED UNDER THIS

WARRANTY. The lamp unit is a user-replaceable component.

Rental Units

The warranty for DLPTM Television rental units begins on the date of the

first rental or thirty (30) days after the date of shipment to the rental firm,

whichever comes first.

Limited Warranty for Commercial Units

TACP warrants DLPTM Televisions, including the lamp units contained

therein, that are sold and used for commercial purposes as follows: all

parts are warranted against defects in materials or workmanship for a

period of ninety (90) days after the date of original retail purchase.

DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR

REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART

WITHOUT CHARGE TO YOU.

Owner's Manual and Product Registration

Read this owner's manual thoroughly before operating this DLPTM

television.

Complete and mail the enclosed product registration card or register your

DLPTM Television online at www.tacp.toshiba.com/service as soon

as possible. By registering your DLPTM Television you will enable TACP to

bring you new products specifically designed to meet your needs and

help us to contact you in the unlikely event a safety notification is required

under the Consumer Product Safety Act. Failure to register your product

does not diminish your warranty rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING

CONDITIONS:

(1) You must retain your original bill of sale or provide other proof of

purchase.

(2) All warranty servicing of this DLPTM Television must be performed by

an Authorized TACP Service Station.

(3) The warranties from TACP are effective only if this DLPTMTelevision is

purchased and operated in the Continental U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup, adjustment of

customer controls, and installation or repair of antenna systems are

not covered by this warranty. Reception problems caused by

inadequate antenna systems, misaligned satellite dishes, cable

television distribution, VCRs, DVD players/recorders, personal

computer level IEEE1394 devices, and any other connected signal

source device are your responsibility.

(5) Warranties extend only to defects in materials or workmanship as

limited above, and do not extend to any DLPTM Television or parts that

have been lost or discarded by you or to damage to the DLPTM

Television or parts caused by fires, misuse, accident, Acts of God

(such as lightning or fluctuations in electric power), improper

installation,improper maintenance, or use in violation of instructions

furnished by TACP; use or malfunction through simultaneous use of

this DLPTM Television and connected equipment; or to units that have

been modified or had the serial number removed, altered, defaced,

or rendered illegible.

How to Obtain Warranty Service

If, after following all of the operating instructions in this manual and

reviewing the section titled "Troubleshooting," you find that service is

needed:

(1) To find the nearest TACP Authorized Service Station, visit TACP's

website at www.tacp.toshiba.com/service or contact TACP's

Consumer Solution Center toll free at 1-800-631-3811.

(2) You must present your original bill of sale or other proof of purchase

to the TACP Authorized Service Station.

For additional information, visit TACP's web site:

www.tacp.toshiba.com.

ALL WARRANTIESIMPLIEDBY THELAW OF ANY STATEOF THE

U.S.A.,INCLUDINGTHEIMPLIEDWARRANTIESOF

MERCHANTABILITYAND FITNESSFORA PARTICULARPURPOSE,

ARE EXPRESSLYLIMITEDTO THE DURATIONOFTHE LIMITED

WARRANTIESSET FORTHABOVE. WITH THE EXCEPTIONOF ANY

WARRANTIESIMPLIEDBY THE LAWOF ANY STATEOF THE U.S.A.

AS HEREBYLIMITED,THE FOREGOINGWARRANTY IS EXCLUSIVE

AND INLIEUOF ALL OTHERWARRANTIES,GUARANTEES,

AGREEMENTS,ANDSIMILAROBLIGATIONSOFTACP WITH

RESPECTTOTHEREPAIROR REPLACEMENTOFANY PARTS.INNO

EVENTSHALLTACP BE LIABLEFORCONSEQUENTIALOR

INCIDENTALDAMAGES(INCLUDING,BUTNOT LIMITEDTO, LOST

PROFITS,BUSINESSINTERRUPTION,OR MODIFICATIONOR

ERASUREOF RECORDEDDATACAUSEDBY USE, MISUSEOR

INABILITYTO USE THIS DLPTM TELEVISION).

No person,agent,distributor,dealer,orcompany is authorizedto change,

modify, orextendthetermsofthese warrantiesinanymannerwhatsoever.

Thetime withinwhich an action must be commencedto enforce any

obligation ofTACParising underthe warrantyor under anystatuteor law

of the UnitedStatesor any statethereof is hereby limitedto ninety(90)

days fromthe date you discover,or should have discovered,the defect.

This limitationdoes notapply to impliedwarrantiesarising underthe law

of any state of the U.S.A.

THIS WARRANTYGIVES YOU SPECIFICLEGAL RIGHTSAND YOU

MAYALSO HAVEOTHERRIGHTSWHICHMAY VARY FROMSTATE

TO STATEINTHE U.S.A.SOME STATESOF THE U.S.A.DO NOT

ALLOWLIMITATIONSON THEDURATIONOF AN IMPLIED

WARRANTY,WHENAN ACTION MAYBE BROUGHT,OR THE

EXCLUSIONOR LIMITATIONOF INCIDENTALOR CONSEQUENTIAL

DAMAGES.THEREFORE,THEABOVE PROVISIONSMAYNOTAPPLY

TOYOU UNDERSUCH CIRCUMSTANCES. 05

HM66 (E/F) Web 213:27(

HM66 ENbook Page 52 Thursday February 23. 2006 2:49 PM

Limited CanadaWarranty

for DLPTM TelevisionModels

Toshibaof CanadaLimited ("TCL")makesthe followinglimitedwarranties

to original consumersin Canada.

THESE LIMITEDWARRANTIESEXTENDTO THE ORIGINAL

CONSUMERPURCHASERORANY PERSONRECEIVINGTHISDLPTM

TELEVISIONAS A GIFT FROMTHEORIGINALCONSUMER

PURCHASERAND TO NOOTHERPURCHASERORTRANSFEREE.

PRODUCTSPURCHASEDINTHEU.S.A.AND USED INCANADAARE

NOT COVEREDBY THESEWARRANTIES.

PRODUCTSPURCHASEDINCANADAAND USEDINTHE U.S.A.ARE

NOT COVEREDBY THESEWARRANTIES.

Limited One (1) Year Warranty on Parts and Labor*

TCL warrants this DLPTM television television and its parts against defects

in materials or workmanship for a period of one (1) year after the date of

original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S

OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR

REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR

LABOR. TCL Authorized Service Depot personnel will come to your home

when warranty service is required. Depending on the type of repair

required, either the service will be performed in your home or the set will

be taken to the TCL Authorized Service Depot for repair and returned to

your home at no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN

100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.

Limited One (1) Year Warranty on Lamp Unit*

TCL warrants the lamp unit in this DLPTM television against defects in

materials or workmanship for a period of one (1) year after the date of

original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S

OPTION, EXCHANGE A DEFECTIVE LAMP UNIT WITH A NEW OR

REFURBISHED LAMP UNIT WITHOUT CHARGE TO YOU. LABOR

CHARGES FOR LAMP UNIT REPLACEMENT ARE NOT COVERED

UNDER WARRANTY. The lamp unit is a user-replaceable component.

Rental Units

The warranty for rental units, including the lamp units contained therein,

begins with the date of first rental or thirty (30) days from the date of

shipment to the rental firm, whichever comes first.

*Limited Warranty for Commercial Units

TCL warrants DLPTM televisions, including the lamp units contained

therein, sold and used for commercial purposes as follows: all parts are

warranted against defects in materials or workmanship for a period of

ninety (90) days after the date of original purchase. DURING THIS

PERIOD, TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE A

DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT

CHARGE TO YOU. ON-SITE SERVICE ONLY APPLIES WITHIN 100

KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.

Owner's Manual and Product Registration

Read this owner's manual thoroughly before operating this DLPTM

television.

By registering your product you will enable TCL bring you new products

specifically designed to meet your needs and help us to contact you inthe

unlikely event a safety notification is required under the Consumer

Product Safety Act. Failure to register your product does not diminish your

warranty rights.

Your Responsibility

THEABOVE WARRANTIESARE SUBJECTTOTHE FOLLOWING

CONDITIONS:

(1) You must provide your bill of sale or other proof of purchase.

(2) All warranty servicing of this DLPTM television must be performed by

an Authorized TCL Service Depot.

(3) These warranties from TCL are effective only if the DLpTMtelevision is

purchased in Canada from an authorized TCL dealer and operated in

Canada.

(4) Labor charges for installation, setup, adjustment of customer

controls, and installation or repair of antenna systems are not covered

by these warranties. Reception problems caused by inadequate

antenna systems are your responsibility.

(5) Warranties extend only to defects in materials or workmanship as

limited above, and do not extend to any DLPTM television or parts that

have been lost or discarded by you or to damage to the television or

parts caused by fires, misuse, accident, Acts of God (such as

lightning or fluctuations in electric power), improper installation,

improper maintenance, or use in violation of instructions furnished by

TCL; use or malfunction through simultaneous use of this product and

connected equipment; or to units that have been modified or had the

serial number removed, altered, defaced, or rendered illegible.

How to Obtain Warranty Services

If, after following all of the operating instructions in this manual and

checking the "Troubleshooting" section, you find that service is needed:

(1) To find the nearest TCL Authorized Service Depot, visit TCL's web site

at www.tos hiba. ca.

(2) Present your bill of sale or other proof of purchase to the Authorized

Service Depot.

For additional information, visit TCL's web site:

www.toshiba.ca

ALL WARRANTIESIMPLIED BY THELAW OF ANY PROVINCEOF

CANADA, INCLUDINGTHE IMPLIEDWARRANTIESOF

MERCHANTABILITYAND FITNESSFORA PARTICULARPURPOSE,

ARE EXPRESSLYLIMITEDTOTHE DURATIONOFTHE LIMITED

WARRANTIESSET FORTHABOVE. WITH THE EXCEPTIONOF ANY

WARRANTIESIMPLIEDBY THE LAWOF ANY PROVINCEOFCANADA

AS HEREBYLIMITED,THE FOREGOINGWARRANTY IS EXCLUSIVE

AND INLIEUOF ALL OTHERWARRANTIES,GUARANTEES,

AGREEMENTS,AND SIMILAROBLIGATIONSOFTCLWITH RESPECT

TO THE REPAIROR REPLACEMENTOFANY PARTS.IN NO EVENT

SHALLTCL BE LIABLEFORCONSEQUENTIALOR INCIDENTAL

DAMAGES(INCLUDING,BUTNOTLIMITEDTO, LOST PROFITS,

BUSINESSINTERRUPTION,OR MODIFICATIONOR ERASUREOF

RECORDEDDATACAUSEDBY USE, MISUSE,OR INABILITYTO USE

THIS PRODUCT).

No person,agent,distributor,dealer,orcompany is authorizedto change,

modify, orextendthetermsofthese warrantiesinanymannerwhatsoever.

The time withinwhich action must be commenced to enforce any

obligation of TCLarising under this warrantyor under any law of Canada

or of any province thereofis hereby limited to 90 days from the date you

discover, or should havediscovered, the defect.This limitationdoes not

apply to impliedwarranties arising underthe law of any provinceof

Canada.

THIS WARRANTYGIVES YOU SPECIFICLEGAL RIGHTS,AND YOU

MAYALSO HAVEOTHERRIGHTS,WHICHMAY VARYFROM

PROVINCETO PROVINCEIN CANADA.SOME PROVINCESOF

CANADADO NOTALLOWLIMITATIONSON THEDURATIONOFAN

IMPLIEDWARRANTY,LIMITATIONSONTHE TIMEWITHINWHICHAN

ACTIONMAYBE BROUGHT,ORTHEEXCLUSIONOR LIMITATIONOF

INCIDENTALORCONSEQUENTIALDAMAGES;THEREFORE,THE

ABOVE LIMITATIONSOR EXCLUSIONSMAY NOTAPPLY TO YOU

UNDERSUCHCIRCUMSTANCES.

HM66 (E/F) Web 213:276

HM66 ENbook Page 53 Thursday Februar,,'23. 2006 2:49 PM

A copy of the GPL source code in this product may be obtained by

contacting Toshiba Consumer Solutions at (800)631-3811. There will be

a charge to cover the costs of providing the source code.

A copy of the LGPL source code in this product may be obtained by

contacting Toshiba Consumer Solutions at (800)631-3811. There will be

a charge to cover the costs of providing the source code.

reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

(1) Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

(2) Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

(3) Neither the name of The NetBSD Foundation nor the names of its

contributors may be used to endorse or promote products derived

from this software without specified prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC.

AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product includes software developed by the OpenSSL Project for use

in the OpenSSL Toolkit (http://www.openssl.org).

This product includes cryptographic software written by Eric Young

(eay@cryptsoft.com).

reserved. Redistribution and use in source and binary forms, with or

without modification, are permitted provided that the following conditions

are met:

(1) Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

(2) Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

(3) All advertising materials mentioning features or use of this software

must display the following acknowledgement: This product includes

software developed by the OpenSSL Project for use in the OpenSSL

Toolkit (http://openssl.org).

(4) The names "OpenSSL Toolkit" and "Open SSL Project" must not be

used to endorse or promote products derived from this software

without prior written permission. For written permission, please

contact openssl-core@openssl.org.

(5) Products derived from this software may not be called "OpenSSL" nor

may "Open SSL" appear in their names without prior written

permission of the OpenSSL Project.

(6) Redistributions of any form whatsoever must retain the following

acknowledgement: "This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit (http://

www.openssl.org)."

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS"

AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product

includes cryptographic software written by Eric Young

(eay@cryptsoft.com). This product includes software written by Tim

Hudson (tjh @cryptsoft.com).

reserved. This package is an SSL implementation written by Eric Young

(eay@cryptsoft.com). The implementation was written so as to conform

with Netscapes SSL. This library is free for commercial and non-

commercial use so long as the following conditions are adhered to. The

following conditions apply to all code found in this distribution, be it the

RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL

documentation included with this distribution is covered by the same

the code are not to be removed. If this package is used in a product, Eric

Young should be given attribution as the author of the parts of the library

used. This can be in the form of a textual message at program startup

or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

(1) Redistributions of source code must retain the copyright notice, this

list of conditions and the following disclaimer.

(2) Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

(3) All advertising materials mentioning features or use of this software

must display the following acknowledgement: "This product includes

cryptographic software written by Eric Young (eay@cryptsoft.com)."

The word 'cryptographic' can be left out if the routines from the library

being used are not cryptographic related.

(4) If you include any Windows specific code (or derivative thereof) from

the apps directory (application code) you must include an

acknowledgement: "This product includes software written by Tim

Hudson (tjh@cryptosoft.com)."

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE. The license and distribution terms for any publicly available

version or derivative of this code cannot be changed, i.e. this code cannot

simply be copied and put under another distribution license (including the

GNU Public License).

HM66 (E/F) Web 213:27(

HM66 ENbook Page 54 Thursday Februar,,'23. 2006 2:49 PM

Cinema mode .................................

Closed captions ..............................

Color temperature ..........................

ColorStream HD audio ....................

Antenna input configuration ............ 16

Audio quality adjustments ............... 33

Auto aspect .................................... 29

Auto power off ................................ 40

Back of the TV .................................. 6

Blocking channels .......................... 37

CableClear DNR ............................ 41

CH RTN button ............................... 26

CH A v buttons .............................. 26

Channel Browser Setup .................. 24

Channel Browser TM ........................ 24

Channel Browser TM banner ............. 25

Channel Number buttons ................ 26

Channel programming

Automatic programming ........... 17

Manually adding and deleting... 17

Defaults, restore TV factory ............ 22

Digital audio selector ...................... 32

Digital signal meter ......................... 21

DNR (Digital Noise Reduction) ........ 41

Dynamic contrast ............................ 41

Favorite channels ........................... 18

Features, TV .................................... 4

Front of the TV ................................. 5

HDMI audio mode .......................... 20

INPUT button ................................. 23

Installation, setup ............................. 4

Integrated digital tuning .................... 4

Labeling video input ........................ 23

Lamp mode .................................... 42

Lamp unit replacement .................... 47

Language selection ......................... 16

Last mode memory feature ............. 40

LED indications ............................... 46

LOCKS menu

Channels, blocking ................... 37

Enable rating blocking .............. 36

New PIN code .......................... 35

Panel lock ................................ 39

Unlocking programs

temporarily ................. 38

Video inputs, locking ................ 38

Locks menu .................................... 35

MPEG noise reduction .................... 41

MTS feature ................................... 33

MUTE button .................................. 32

Optical audio output format ............. 34

Picture adjustment .......................... 30

Picture mode .................................. 30

Picture quality ................................. 30

Picture scroll ................................... 28

Picture size selection ...................... 27

POWER button ................................. 5

Quick Restart TM .............................. 20

RECALL button .............................. 40

Remote control

Battery installation ...................... 7

Device code table .................... 12

Effective range ........................... 7

Functional key chart ................. 10

Learning about the buttons ......... 8

Programming ........................... 11

SAP sound ..................................... 33

Scroll settings ................................. 28

Selecting Menu Language ............... 16

Side panel control ............................. 5

Sleep timer ..................................... 39

Speaker On/Off ............................... 34

Specifications ................................. 50

StableSound ®................................. 34

Stereo sound .................................. 33

Surf Lock TM ...................................... 26

System status ................................. 22

TheaterWide ® picture size ............... 27

Troubleshooting .............................. 44

V-Chip blocking (Locks menu) ......... 35

Video input label ............................. 23

Video input lock .............................. 38

Warranty

Canada .................................... 52

U.S .......................................... 51

WOW:SRS 3D ................................ 43

WOW:SRS Focus ........................... 43

WOW:SRS TruBass ........................ 43

HM66 (E/F) Web 213:276

HM66 ENbook Page 56 Thursday February 23. 2006 2:49 PM

TOSHIBA AMERICA CONSUMER PROOUCTS, L.L.C.

CorporateHeadquarters:82TOTOWAROAD,WAYNE,NJ 07470,U.S.A.

NATIONALSERVICEDIVISION:1420-BTOSHIBADRIVE,LEBANON,TN37087,U.S.A.

TOSHIBA OF CANAOA LTO.

HEAD OFFICE: 191 McNABB STREET,MARKHAM, ONTARIO, L3R 8H2, CANADA - TEL: (905) 470-5400

SERVICECENTERS:

TORONTO: 191 McNABB STREET,MARKHAM, ONTARIO L3R 8H2, CANADA - TEL: (905) 470- 5400

MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA - TEL: (514) 390-7766

VANCOUVER:22171 FRASERWOODWAY,RICHMOND, B.C., V6W 1J5, CANADA TEL: (604) 303-2500

MANUFACTUREDBY

TOSHIBA AMERICA CONSUMER PROOUCTS, L,L,C,

CableClear, ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.LC.

Channel Browser, SurfLock, and Quick Restart are trademarks of Toshiba America Consumer Products, LL.C.

TM TM TM

Digital Light Processing , DLP and the DLP medallion are trademarks of TexasInstruments.

PRINTED IN USA

(06-03) rOSHIBA

HM66 (E/F) Web 213:276

Toshiba 50HM66 User Manual DLP TELEVISION Manuals And Guides L0605020

TOSHIBA DLP Television Manual L0605020 TOSHIBA DLP Television Owner's Manual, TOSHIBA DLP Television installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation