Toshiba 5520C Users Manual

2014-12-13

• Purpose of the Imaging Manual
• Table of Contents
• 1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
  • 1.1 To Obtain a Darker Image
  • 1.2 To Adjust the Density on a Solid Colored Image
  • 1.3 To Achieve the Image Quality Most Suitable for the Paper Used (To eliminate blur and graininess from an image)
  • 1.4 To Minimize Variations in the Image Quality under the Operating Conditions (To optimally program image quality control)
  • 1.5 To Correct Out-of-Registration Colors
• 2. Copier-specific Adjustments
  • 2.1 To Copy Text Clearly (To eliminate faint, smudged or blurred text)
    • 2.1.1 To Adjust the Copy Image Quality in the Black Mode
    • 2.1.2 To Adjust the Copy Image Quality in the Full Color Mode
    • 2.1.3 To Adjust the Copy Image Quality in the Auto Color Mode
  • 2.2 To Closely Match the Color Balance of the Original
  • 2.3 To Improve the Reproducibility of Gray
  • 2.4 To Copy in Vivid Colors
  • 2.5 To Make the Pale Area of the Original Look Darker and Sharper (To improve the highlight reproducibility)
  • 2.6 To Eliminate the Background Color
    • 2.6.1 To Adjust the Copy Image Quality in the Black Mode
    • 2.6.2 To Adjust the Copy Image Quality in the Full Color Mode
  • 2.7 To Avoid Copying the Image Seen through the Back of a Page Printed on Thin Paper
    • 2.7.1 To Adjust the Copy Image Quality in the Black Mode
    • 2.7.2 To Adjust the Copy Image Quality in the Full Color Mode
  • 2.8 To Eliminate Moiré
  • 2.9 To Copy Sharply (To enhance sharpness)
  • 2.10 To Make Photo Edges Look Softer
  • 2.11 To Make Solid Filled Bold Text (Logo) Highly Colored
    • 2.11.1 To Adjust the Copy Image Quality of a Black Logo
    • 2.11.2 To Adjust the Copy Image Quality of a Colored Logo
  • 2.12 To Sharply Contrast the Hues of Highlighters on the Copy
  • 2.13 To Obtain a Good Color Balance on Thick Paper
  • 2.14 To Obtain Smooth Gray-Scale Photo Images
  • 2.15 To Change the Threshold in Auto Color Mode (To change the threshold between the Full Color mode and the Black mode to meet the user’s needs)
  • 2.16 To Adjust the Twin-Color Copy Image Quality
    • 2.16.1 To Adjust the Tint of Colors other than Black
    • 2.16.2 To Adjust the Reproducibility of Black in the Red and Black Mode
    • 2.16.3 To Adjust the Boundary between Black and Colors other than Black
  • 2.17 To Adjust the Image Quality Scanned from the RADF
  • 2.18 To Program Frequently Used Copy Settings (To Use Custom Mode)
    • 2.18.1 To Adjust Custom Mode Settings in Black Mode
    • 2.18.2 To Adjust Custom Mode Settings in Color Mode
  • 2.19 To Copy While Erasing Shadow Outside of Image
  • 2.20 To Avoid Copying Blank Page of Original Scanned with RADF
  • 2.21 To Obtain Image in Even Density Level
• 3. Printer-specific Adjustments
  • Restrictions on Use of Printer Functions
  • 3.1 To Maintain a Steady Color Balance
  • 3.2 To Maintain a Steady Color Balance on Thick Paper or Special Paper
  • 3.3 To Obtain the Desired Color Balance
  • 3.4 To Closely Match the Color Balance on the Monitor
  • 3.5 To Maintain a Uniform Gray Hue(To maintain Consistency in Gray among Text, Photos and Graphics)
  • 3.6 To Use Only the Black Toner to Reproduce Gray Areas(To use only the black toner to reproduce black-and-white photos or gradational images)
  • 3.7 To Easily Adjust the Overall Brightness
  • 3.8 To Adjust the Overall Saturation
  • 3.9 To Easily Adjust the Overall Contrast
  • 3.10 To Obtain a Sharper Print Image
  • 3.11 To Obtain a Softer Image
  • 3.12 To Make Low-resolution Data Look Finer (To soften an image)
  • 3.13 To Eliminate Smudges from Highly Colored Text and Lines (To prevent toner scattering around text and lines where a large amount of toner is used)
  • 3.14 To Clearly Print Light-Colored Thin Lines or Text
    • 3.14.1 To Adjust the Print Image Quality in the Color Mode
    • 3.14.2 To Adjust the Print Image Quality in the Black and White Mode
  • 3.15 To Make the Light-Colored Area Darker on the Printout
  • 3.16 To Clearly Print Thin Lines/Double Lines
  • 3.17 To Decrease the Image Density and Save Toner (To Print in the Toner Save Mode)
  • 3.18 To Adjust the Image Density in the Toner Save Mode
  • 3.19 To Print Illegible Gray or Colored Text in Black
  • 3.20 To Ignore Blank Pages for Printing
  • 3.21 To Sharply Print Black Text
  • 3.22 To Prevent Dark Toner from Coming Off
  • 3.23 To Register the Image Quality Adjusted Corresponding to a Preference(To use the Custom Color Settings)
  • 3.24 To Print a Full-Color Original in Two Colors
    • 3.24.1 To Adjust Colors
    • 3.24.2 To Adjust the Sharpness
    • 3.24.3 To Print a Full-Color Original in Two Colors
  • 3.25 To Use ICC Profile
    • 3.25.1 To Create ICC Profiles for Printing on the Paper to be Used
    • 3.25.2 To Print Precise Colors Using Existing RGB Source ICC Profiles
    • 3.25.3 To Perform Simulated Printing with CMYK Inks of Each Ink Manufacturer
    • 3.25.4 To Convert Colors with Specified Source ICC Profiles (Not Using Embedded ICC Profiles)
    • 3.25.5 To Perform Further Adjustment After Using ICC Profiles
• 4. e-Filing-specific Adjustments
  • 4.1 To Clearly Store a B/W Image in the Auto Color Mode
  • 4.2 To Store an Original while Reducing the File Size
  • 4.3 To Store a Color Photo Image, while Minimizing Moiré
  • 4.4 To Match the Color Balance on the Original(To adjust the color balance in Print to Box)
  • 4.5 To Scan and Print, while Minimizing Moiré
  • 4.6 To Finely Print the Image Stored in the e-Filing box(To print images stored through Copy to Box or Print to Box)
  • 4.7 To Store an Image Suitable for Displaying on the Monitor or Image Editing
  • 4.8 To Finely Print Color Images Scanned and Stored(To print images stored through Scan to Box)
  • 4.9 Appendix
• 5. Scanning-specific Adjustments
  • 5.1 To Clearly Scan Text (To reduce noise around text)
  • 5.2 To Scan an Original, while Eliminating the Background Color(To eliminate the background density)
  • 5.3 To Clearly Scan and Print an Original in Black and White(To improve gradation and reduce graininess)
  • 5.4 To Scan the Original, while Reducing the File Size
    • 5.4.1 To Reduce the File Size by Changing the Options when Scanning the Original
    • 5.4.2 To Reduce the File Size in Slim PDF
  • 5.5 To Sharply Scan the Original (To increase the sharpness intensity)
  • 5.6 To Scan an Original, while Enhancing Black
  • 5.7 To Scan an Original with the Desired Gradation
  • 5.8 To Register the Original Mode Optimal for a Particular Type of Original(To have "Custom" selected)