Toshiba L7333 40 Users Manual

2015-03-11

: Toshiba Toshiba-L7333-40-Users-Manual-655880 toshiba-l7333-40-users-manual-655880 toshiba pdf

Open the PDF directly: View PDF .
Page Count: 103

Download
Open PDF In Browser	View PDF

USER MANUAL
L73** Digital Series
M83** Digital Series

English

Contents

Switching display mode or selecting 3D format .. 30
Setting the auto start mode................................. 31
Adjusting 2D to 3D Depth ................................... 32
Setting the 3D PIN code ..................................... 32
Setting 3D Start Message ................................... 32
Setting 3D Lock................................................... 33
Setting 3D Timer Lock ........................................ 33
Setting Enable 3D Timer..................................... 33
Displaying 3D Important Info............................... 33
Switching left and right images ........................... 33
Sound controls ........................................................... 34
Volume controls and sound mute ....................... 34
Dual..................................................................... 34
Balance ............................................................... 34
Bass, Treble........................................................ 34
TV Mounting (Wall/Table) ................................... 34
Dynamic Volume® ............................................... 34
Audyssey ABX™................................................. 34
Dynamic Range Control...................................... 34
Audio Level Offset............................................... 35
TV Speakers On/Off............................................ 35
Headphone Settings ........................................... 35
Audio Description................................................ 35
Widescreen viewing ................................................... 36
Picture controls .......................................................... 38
Picture Mode....................................................... 38
Picture preferences............................................. 38
Reset................................................................... 38
ColourMaster ...................................................... 38
Base Colour Adjustment ..................................... 39
Colour Temperature............................................ 39
Auto Brightness Sensor ...................................... 39
Active Backlight Control ...................................... 39
Black/White Level ............................................... 39
MPEG NR – Noise Reduction............................. 40
DNR – Digital Noise Reduction........................... 40
Resolution +........................................................ 40
ClearScan ........................................................... 40
Resetting the advanced picture settings ............. 40
Expert Picture Settings ....................................... 40
Automatic Format (Widescreen) ......................... 42
4:3 Stretch........................................................... 42
Picture Position ................................................... 42
Picture still........................................................... 42
HDMI Information Display ................................... 42
Wireless LAN Information .......................................... 43
Setting up the Network ............................................... 44
Wireless Setup.................................................... 44
Advanced Network Setup ................................... 47
DNS Setup .......................................................... 48
Network Connection Test.................................... 48
Using the software keyboard .............................. 49
Network Device Setup................................................ 49
Apps Control Profile ............................................ 49
TV Power On Control (Active Standby) .............. 50
Media Renderer Setup........................................ 50
Device Name Setup ............................................ 50
USB HDD Record Function........................................ 51

INSTALLING YOUR TV
Safety Precautions .......................................................4
Installation and important information ..........................5
The remote control .......................................................7
Inserting batteries and effective range ..................7

CONNECTING YOUR TV
Connecting external equipment....................................8
Connecting an HDMI® device.......................................9
To connect an HDMI device..................................9
HDMI’s ARC (Audio Return Channel) feature.......9
Connecting an HDMI CEC Control compatible
device ......................................................................10
Connecting a computer ..............................................11
To connect a PC to the HDMI terminal ...............11
To connect a PC to the RGB/PC terminal...........11
Connecting a home network.......................................12
To connect the TV to a home network - Wired....12
To connect the TV to a home network with an
internet connection - Wireless ..........................12
To connect the TV to the PC with
Intel® Wireless Display.....................................12
Controls and input connections ..................................13
Switching on........................................................13
Using the TV controls and connections...............13
Using the menu system.......................................14

SETTING UP YOUR TV
Startup Application .....................................................15
Quick Setup.........................................................15
Ant/Cable/Satellite (if available) ..........................20
Satellite Settings .................................................21
Auto Tuning.........................................................22
ATV Manual Tuning....................................................23
Tuning .................................................................23
Skip .....................................................................24
Sorting positions..................................................25
DTV Manual Tuning ...................................................25
Manual Tuning ....................................................25
Manual Tuning for DVB-C ...................................26
Manual Tuning for DVB-S ...................................26
DTV Settings ..............................................................26
Channels (Antenna/Cable)..................................26
Channels (Satellite).............................................27
Standby Channel Update ....................................27
Location setting ...................................................27
Analogue switch-off.............................................27

CONTROLS AND FEATURES
General controls .........................................................28
Quick Menu .........................................................28
Selecting channels ..............................................28
The Time Display – analogue only.....................28
Stereo and Bilingual transmissions .....................29
Using 3D functions .....................................................29
Viewing 3D images .............................................29

TEXT SERVICES
Text services .............................................................. 87
Selecting modes ................................................. 87
Text information .................................................. 87
Navigating pages using Auto .............................. 87
Navigating pages using LIST .............................. 87
Control buttons.................................................... 88

PROBLEM SOLVING
Questions and Answers .......................................... 89

INFORMATION
Information ................................................................. 92
Licence information .................................................... 98
Cautions and other information for 3D ..................... 100
Specifications and accessories ................................ 102

During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:
If your TV is connected to the internet, firmware will be automatically made available.
If your TV is not connected to the internet, you can download the latest version of firmware from
www.toshiba-om.net/firmware.php
*Some features are limited due to local legislation and may not be available in all countries.

English

Subtitles .............................................................. 79
Audio languages ................................................. 79
Common Interface .............................................. 80
Software Upgrade and Licences ................................ 80
Searching for New Software ............................... 80
Network Upgrade ................................................ 80
Software Licences............................................... 81
System Information and Reset TV ............................. 81
System Information ............................................. 81
Reset TV ............................................................. 81
PC Settings ................................................................ 82
Horizontal and Vertical Position .......................... 82
Clock Phase........................................................ 82
Sampling Clock ................................................... 82
Reset................................................................... 82
Input selection and AV connections ........................... 83
Input selection..................................................... 83
Labelling video input sources.............................. 83
Digital Audio Output ............................................ 84
Using HDMI CEC Control........................................... 85
Enable HDMI CEC Control ................................. 85
TV Auto Power.................................................... 85
Auto Standby ...................................................... 85
Amplifier Control ................................................. 85
Initial Speaker Setting ......................................... 85
HDMI CEC Control input source selection.......... 85
HDMI CEC Control one touch play ..................... 86
HDMI CEC Control system standby.................... 86
Using MHL TV function .............................................. 86
Connecting an MHL-compatible device .............. 86
Operating an MHL-compatible device................. 86
MHL Setup .......................................................... 86

Setting up the USB HDD for recording................51
To record DTV programmes (One Touch
Recording)........................................................51
How to set recordings via the Programme
Guide................................................................52
To check, edit or delete scheduling information..54
To view a recorded programme ..........................54
Operations from the Library screen.....................55
Recording Setup .................................................56
Scheduling priority...............................................57
Using the Cloud TV Service .......................................57
Using Web Browser ............................................57
Using Skype ........................................................59
Using Hybrid TV Standard (if available) .....................64
Using Intel® Wireless Display.....................................64
Intel® WiDi Device Name ....................................65
Device List...........................................................65
Using the Media Player ..............................................65
Basic operation ...................................................66
Viewing photo files (on a media server or USB
device)..............................................................67
Viewing movie files (on a media server or USB
device)..............................................................69
Playing music files (on a media server or USB
device)..............................................................72
Other features ............................................................73
Panel Lock ..........................................................73
Blue Screen.........................................................73
Netflix® ................................................................73
The timers ..................................................................74
Programme Timers – digital only .......................74
On Timer .............................................................74
Sleep Timer.........................................................74
Energy Saving Settings ..............................................75
Automatic Power Down.......................................75
No Signal Power Down .......................................75
Digital on-screen information......................................75
Information ..........................................................75
Using EPG (Electronic Programme Guide) ................76
Using Broadcast Guide .......................................76
Genre selection/searching ..................................77
Digital settings – parental control ...............................77
Parental PIN Setup .............................................77
Parental Setup ....................................................78
Digital settings – Channel Options .............................78
Selecting favourite channels ...............................78
Favourite Channel List ........................................78
Skip channels......................................................79
Locking channels ................................................79
Digital settings – other settings ..................................79

English

INSTALLING YOUR TV

Safety Precautions

DO NOT REMOVE ANY FIXED COVERS AS THIS
WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

This equipment has been designed and manufactured to
meet international safety standards but, like any electrical
equipment, care must be taken to obtain the best results
and for safety to be assured. Please read the points below
for your own safety. They are of a general nature, intended
to help with all electronic consumer products, and some
points may not apply to the goods you have just
purchased.

THE MAINS PLUG IS USED AS THE
DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.

Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and shorten
the life of the equipment.

Air Circulation
Leave more than 10 cm clearance around the television to
allow adequate ventilation. This will prevent overheating
and possible damage to the television. Dusty places
should also be avoided. For wall mounted positions at
least 2.5 cm gap was retained from the wall and the 10 cm
was kept clear around all edges of the TV.

DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such as
vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such
as lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.

Heat Damage

WARNING: To prevent the spread of

Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity. Place in a location where the
temperature remains between 5 °C min. and 35 °C max.

fire, keep candles or other open flames
away from this product at all times.

DO NOT use makeshift stands and NEVER fix legs with

Mains Supply

wood screws.

The mains supply required for this equipment is 220-240 V
AC 50 Hz. Never connect to a DC supply or any other
power source. DO ensure that the television is not
standing on the mains lead.
DO NOT cut off the mains plug from this equipment, this
incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.

DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make sure
your family knows how to do this. Special arrangements
may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in
any doubt about it working normally, or it is damaged in
any way – switch off, withdraw the mains plug and consult
your dealer.

DO NOT push/pull CI CAM at a tilt to prevent breakdown

DO read the operating instructions before you attempt to

of COMMON INTERFACE.

use the equipment.

WARNING: Excessive sound pressure from earphones

DO ensure that all electrical connections (including the

or headphones can cause hearing loss.

mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and in
accordance with the manufacturers’ instructions. Switch
off and withdraw the mains plug before making or
changing connections.

ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet
back, or push anything into holes, slots or any
other openings in the case. These actions will
damage screen or internal parts.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry.

DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instructions. See page 5.

DO be careful with glass panels or stands on equipment.
DO use a soft, dry cloth to clean the unit.

INSTALLING YOUR TV

English

Installation and important information
Where to install
Locate the television away from direct sunlight and
Screw
(supplied)
strong lights. Soft, indirect lighting is recommended for
9 mm
comfortable viewing. Use curtains or blinds to prevent
20
mm
direct sunlight falling on the screen.
4 mm
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
Stand style is dependent on model
injury and maintain stability of this apparatus,
secure the TV using the fixing in the stand.
The LCD display panels are manufactured using an extremely high level of precision technology; however,
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not
a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure
will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or
openings in the case.
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.
Studies indicate that plastics may weaken and crack over time from the combination effects of
chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could
result in serious injury and/or permanent damage to TV and TV pedestal.

When using a Wall Bracket
Removing the Pedestal Stand:

Use a wall bracket appropriate for the size and weight of
the LCD TV.
• Two people are required for installation.
• Install a wall-mount from another manufacturer.
1 Unplug and remove any cables and/or other
component connectors from the rear of the TV.
2 Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3 Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the
TV as described in the instructions provided with the
wall bracket.
4 Always use the screws supplied or recommended by
the wall mount manufacturer.

Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the
LCD panel.

Remove the cover and screws.
Screws

Once you have removed all screws holding the
pedestal stand in place, remove the pedestal stand
from the TV by sliding the pedestal stand away from
the TV.

When using MHL (Mobile High-definition Link)
• Interoperability with MHL devices of other
manufacturers is not guaranteed.
• Toshiba does not provide any guarantee, therefore,
against operational failure such as that described below
when an MHL source is connected to the TV.
- No picture or sound
- Some of the functions do not work by remote
operation from the TV

• If the MHL does not work properly, also contact the
manufacturer of the source device for advice on its use.

English

INSTALLING YOUR TV

Please take note
The digital reception function of this television is only effective in the countries listed in the “Country”
section of the “Installation” menu. Depending on country/area, some of this television's functions may not
be available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer
displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they
could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes (e.g. Super Live) will prevent permanent retention.

EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the
owner’s manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously
with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but
not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.

When Using a USB Hard Drive (HDD)
• The recording function has been designed for
private use and entertainment in your home
environment. Please note that any
commercial use of the recording function
could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect
the intellectual property rights of third
parties.

• Toshiba shall not be liable for damages of any
kind whatsoever (breakdown of the recording
device, modification or loss of the recorded
content, etc.) resulting from malfunction,
operating failure or incorrect operation due to
combining with another connected device.
• If you connect a USB HDD that has been used
with a PC or another TV, only programmes
which are recorded using this TV can be
playback.

• Before recording to a device connected to the
TV, make a test recording and check the
recording performance.

• Switch the TV to standby before you
disconnect the USB HDD.

• Programmes that are prohibited from copying
due to copyright protection cannot be
recorded.

Not doing so may result in loss of the recorded
data or malfunction of the USB HDD.
• Please note that recording on the USB HDD is
no longer playable after the TV’s main-board
is exchanged during service.

• Toshiba shall not be liable for compensation
or incidental damages of any kind
whatsoever resulting from content that was
not properly recorded on the recording
device or that was modified or lost.

INSTALLING YOUR TV

19
20

Simple at-a-glance reference of your remote control.

1
2
4
5
7

21
22
23
24

3
6
8
9

25
26
27

10
11
13
14
16
18
19
21
23
25
27
28
29
31

- Accesses the CLOUD HOME
- Accesses to premium content available
online
To access the on-screen Menu
To display the digital on-screen Programme Guide
To page up, down, left or right
When using menus, the arrows move the cursor on the
screen up, down, left or right. Press OK to confirm your
selection
To return to previous Menu
To exit menus and applications
When in TV mode:
D Analogue time display
When in Text mode:
A
To reveal concealed text
B
To hold a wanted page
C
To enlarge text display size
D To erase Text pages temporarily when you
are viewing in teletext mode.

15
17
20
22

During Playback:
c
To PLAY
v
To STOP
W
To PAUSE
Z
To SKIP-BACK
CC
To REWIND
cc
To FAST FORWARD
z
To SKIP FORWARD

24
26

28
29
30
31

To access the analogue or digital Channel List
To call up text services
To record DTV programmes
Colour buttons: Text and interactive service control
buttons

Inserting batteries and effective range
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

For On/Standby mode
To select external input sources
To select TV Mode
Selectable Picture
Widescreen viewing
Picture still
Digital Subtitles or Analogue TEXT Subtitle pages if
available
s Stereo/bilingual transmissions
To switch between 2D / 3D modes
Number buttons
Switch the Audio Description On/Off
To return to previous channel
To display on-screen information
To access the index page in Text mode
To alter the TV volume
To change programme positions
To change TEXT pages
To mute the TV sound
To access Quick Menu
- Accesses the Search Portal

Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote control
are AAA, IEC R03 1.5 V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove
exhausted batteries immediately to prevent acid from
leaking into the battery compartment. Dispose of them in
accordance with instructions on page 99 of this manual.
Warning: Batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need
replacing.

English

The remote control

English

CONNECTING YOUR TV

Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no
switch, remove the mains plug from the wall socket.
ILLUSTRATION SHOWS 40L.

DVB Common Interface
(for Conditional Access
Module (CAM))
Headphones
HDMI (1~3)

USB (1~2)

Power cord

HDMI 4 INPUT

LAN port

DIGITAL AUDIO OUTPUT
(OPTICAL)

COMPONENT VIDEO/AUDIO INPUT
VIDEO/AUDIO INPUT (Y/L/R) (EXT 2)
SCART (EXT 1)

RGB/PC INPUT

40L/40M

50L/50M/58L/58M

Satellite dish
Aerial Cable
Decoder*

Aerial
LNB IN SATELLITE ANTENNA
(L736*/M836* series only)

* A Decoder can be digital Satellite, free to air or any
other compatible decoder / recorder.

HDMI® (High-Definition Multimedia Interface) is for use
with electrical equipment with digital audio and video
output. It is designed for best performance with 1080i and
1080p high-definition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p
signals.
PC format signals will also be displayed.

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the TV.
If you use a decoder and/or a media recorder, it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the TV.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.

NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the
television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.

LAN port is used to connect the TV to your home network.
A wide variety of external equipment can be
connected to the back of the television; therefore, the
relevant owner’s manuals for all additional equipment
must be referred to for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To recall
external equipment, press o to select between TV,
EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC.

The RCA sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO devices, connect
those cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of
a suitable surround sound system.
NOTE: This output is always active.

When the external input mode is selected while viewing
DTV mode, the SCART socket does not output video/
audio signals.

CONNECTING YOUR TV

HDMI’s ARC (Audio Return Channel)
feature

The HDMI input on your television receives
digital audio and uncompressed digital video
from an HDMI source device.

This feature enables the audio signal of the TV to be sent
to the AV amplifier via the HDMI cable. It will not be
necessary to connect a cable from the audio output of the
TV to the audio input of the AV amplifier to reproduce the
audio received from the tuner of the TV through the AV
amplifier.

This input is designed to accept HDCP (High-Bandwidth
Digital Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI
output). For acceptable video signal formats, see page 93.

the side of your television

NOTE: Supported Audio format: Linear PCM, Dolby
Digital (AC-3), sampling rate 32/44.1/48 kHz.

To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.

HDMI cable

For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (
).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50 Hz,
you will need a Category 2 cable. Conventional HDMI/
DVI cable may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
AV amplifier that supports ARC

the back and side of your television

HDMI device

HDMI cable

To view the HDMI device video, press o to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

English

Connecting an HDMI® device

English

CONNECTING YOUR TV

Connecting an HDMI CEC Control compatible device
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation
of setup and operations, see pages 85–86.
the side of your television

AV amplifier

Playback device

For the setup shown above, you will need three HDMI
cables.
NOTE:
• If several devices are connected, the HDMI CEC Control
feature may not operate properly.
• For proper operation, it is recommended that you use
HDMI cables with the HDMI Logo (
).
• This function is available when one PC and one AV
amplifier are connected separately. However, it may not
operate properly if the PC is connected via the AV
amplifier.

Before controlling the device(s):
• After completing the above connections, set the HDMI
CEC Control Setup menu as you desire (see page 85).
• The connected devices must also be set. For details,
see the operation manual for each device.
• The HDMI CEC Control feature uses CEC technology as
regulated by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
HDMI CEC Control. However, Toshiba is not liable for
those operations. Refer to individual instruction manuals
for compatibility information.

CONNECTING YOUR TV

To connect a PC to the RGB/PC
terminal

With either an HDMI or an RGB/PC connection,
you can watch your computer’s display on the
television.

When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable.
the back of your television

To connect a PC to the HDMI
terminal

Computer

When connecting a PC to the HDMI terminal on the
television, use an HDMI cable (type A connector).

Mini D-sub
15 pin connector

the side of your television

RGB PC cable
(not supplied)

Computer

Conversion
adaptor if required
(not supplied)

HDMI cable

To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 92.

If connecting a PC with DVI terminal, use an HDMI-to-DVI
adaptor cable.

To display the optimum picture, use the PC setting feature
(see page 82).

the side of your television

Computer

HDMI-to-DVI
adaptor cable

For acceptable PC and video signal formats, see page 93.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.

NOTE:
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a
compatible mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of
the PC on which you are playing the DVD-Video, some
scenes may be skipped or you may not be able to pause
during multi-angle scenes.
• A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to scaling of
the picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the
television’s features will be unavailable e.g. Colour
System in the Options menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 92).
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.

English

Connecting a computer

English

CONNECTING YOUR TV

Connecting a home network
The LAN port allows your Toshiba TV to
connect to your home network. You can use this
revolutionary home entertainment networking
system to access photo, video and audio files
that are stored on a media server and play/
display them on your TV.
NOTE:
• If you connect to a shared network outside your home, it
is advisable to use a router. Always use network media
products in private network environments. Connect this
TV to the same router as other network media products
(server).
• If you use a hub or switch to connect the TV to your
home network, you may not be able to use the automatic
setup and will have to manually set up the network
address. See page 47.
• If you use a router with built-in DHCP functionality, use
the automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover
LAN cable.
• Please consult your PC manufacturer about details of
PC settings.
• Wireless appliances may interfere with Intel® Wireless
Display.

To connect the TV to a home network
- Wired
the back of your television

Modem (if available)

[1]

Router with Hub

[2]

To connect the TV to a home network
with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 44.
Access point (AP)

Wireless LAN router

Modem

Computer

NOTE:
• If this device is going to be operated in the frequency
range of 5.15 GHz to 5.35 GHz, it is restricted to indoor
use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to
2.4835 GHz in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the
geographical area within a radius of 20 km from the
centre of Ny-Alesund in Norway.
• Make the wireless LAN appropriate security setting at
the time of wireless LAN use to prevent the illegal use,
spoofing and interception of communications.
• Don't connect wireless LAN to an outside network
directly.
Apply the wireless LAN access point with router function
or broadband router. Make the router appropriate
security setting to prevent the illegal use.
Refer to the manual of router for a security setting.

[2] [3]

Server PC

To connect the TV to the PC with
Intel® Wireless Display

Cable or Phone jack

[2]
PC with Intel®
Wireless Display

Intel® WiDi
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do not connect a phone jack directly to the TV’s LAN port.

Warning: This TV complies with the EMC directive only
when you use a shielded Cat5 ethernet cable.

CONNECTING YOUR TV

English

Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the
television.
While all the necessary adjustments and controls for the television are made using the remote
control, the buttons on the television may be used for some functions.
ILLUSTRATION SHOWS 40L.
DVB COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be cancelled.

USB ports
Media Player/USB HDD
connection port

Light sensor
Remote sensor
Power LED
On = Green
Standby = Red

Control panel

Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press 1 on the remote
control; it may take a few moments. The GREEN LED will
be lit.
To put the television into Standby, press 1 on the remote
control. To view the television, press 1 again. The picture
may take a few seconds to appear.
For energy saving:
We recommend that you use the television with the
factory settings. The factory settings are for energy
saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television
is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
use.
Energy efficiency cuts energy consumption and can
save money.
NOTE: Putting the television into Standby will reduce
energy consumption, but will still draw some power.

Using the TV controls and
connections
• To turn on or off the TV, press !.
• To alter the volume, press + or –.
+ and – buttons operate as volume up/down as default.
• Press p / o repeatedly to switch the function of 2 +/
– button as below.
Channel→Input→Volume
The Media Player feature provides access to photo, movie
and music files stored on a USB storage device that is
connected via the USB 1 or USB 2 port or on a network
device.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
NOTE:
• The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other
connected equipment.
• Interactive video games that involve shooting a “gun” at
an on-screen target may not work with this TV.

English

CONNECTING YOUR TV

Press B / b

Using the menu system
Press

Press B / b and OK or c
Recording Setup

on the remote control to display the menu.

The menu appears as a list of eight topics. As each icon is
selected by pressing B / b on the remote control, its
respective options will appear on the right.

Options

Media Player Setup
MHL Setup
HDMI CEC Control Setup

NOTE: The same menu is displayed in DTV (Digital TV)
and ATV (Analogue TV) modes; however, where some
items are not available in a mode, they will appear greyed
out.

Hybrid TV Standard
Teletext
Panel Lock

Picture

Press B / b and OK or c

AV Connection

Picture Mode

Power Management

Reset

Blue Screen
HDMI Information Display

Backlight
Press B / b

Contrast

Menu Language

Brightness
Colour

Press B / b

Installation

Country

Tint

Location

Sharpness

Channel Tuning

Advanced Picture Settings

DTV Settings

Expert Picture Settings

Quick Setup

Display Settings

Reset TV
Press B / b

Press B / b and OK or c

Press B / b and OK or c
Network Setup

Balance
Sound

Press B / b and OK or c

Bass

Network

Network Device Setup
Smart Apps Setup

Treble
Press B / b

Audyssey Premium Television

Press B / b and OK or c
3D Auto Start

Dynamic Range Control
Dual

2D to 3D Depth

Audio Level Offset

3D PIN

TV Speakers

3D Safety Settings

Headphone Level

3D Important Info
Press B / b

Audio Description

Press B / b and OK or c
On Timer

Digital Audio Output
Timers
Press B / b

Sleep Timer
Press B / b and OK or c
Software Licences

Get Help

Software Upgrade
System Information
Store Demo

SETTING UP YOUR TV

Before switching on the TV make sure that your
aerial is connected and any decoder / media
recorder, if applicable is connected and in
Standby.

Press BbC c to highlight Next and press OK.
The Location screen will appear.
Quick Setup

Quick Setup

Smart TV

Press the 1 button, Toshiba logo will appear. After
that, The Menu Language screen will appear.
This screen will appear the first time that the
television is switched on and each time Reset TV
is executed.
Press BbC c to select the menu language and
press OK. The Country/Language screen will
appear.
Menu Language
Please press [OK] to proceed.
English

Français

Deutsch

Español

Italiano

Português

Nederlands

Svenska

1/2

Location
Network

Location

Country

Channel Tuning

To set up the TV for use within a
showroom, please select [Store] from the
menu below.
[Home] is recommended for normal use.
* Power requirement for Store mode will be
higher due to automatic store demos.
Home
Store
Previous

Press B / b to select Home or Store and press
OK. For normal home use, select Home.

Press BbC c to highlight Next and press OK.
The Network Type screen will appear.

Press B to highlight Network Type and then press
c and B / b to select Wireless. Press OK.
Quick Setup

Network Type

1/5

Country

Densk

Norska

Suomi

Polski

Türkçe

Magyar

Slovensky

Český

Network

Pусский

Română

Български

Srpski

Smart TV

Ελληνικα

Hrvatski

Укpaϊнcькa

Slovenščina

Location

Channel Tuning

Network setup allows you to access content
on your home network and the Internet.
Enjoy online video, music, games, news
and more provided by Smart TV portal* and
keep your TV up to date with new software.
* Availability is dependant on country
selection
Please select from Wired or Wireless

Press B / b to highlight Country and press c and
B / b to select your country.
Quick Setup
Country

Country/Language

Network Type
Previous

Location

Channel Tuning

Germany

Primary Subtitle Language

German

Secondary Subtitle Language

Turkish

Primary Audio Language

German

Secondary Audio Language

English

Press BbC c to highlight Next and press OK.
The Wireless Setup screen will appear.

German

Press B to highlight Wireless Setup and then
press c and B / b to select the Wireless Setup
type. Press OK.

Greek
Greenlandic
Hungarian
Icelandic

Quick Setup

Irish
Previous

Wired
Wireless

Network
Country

Skip

• When you select Wired (LAN cable connection),
skip to step 14.

1/3

Welcome
Thank you for choosing Toshiba TV

Smart TV

Wired
Next

Country

Italian
Kurdish

Wireless Setup

2/5

Please select a wireless network setup
option. Assisted Setup is recommended.

Location

NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in
the list, select Others.

Network

Wireless Setup

Easy Setup

Easy Setup
Assisted Setup
Manual Setup

Smart TV
Channel Tuning

English

Startup Application

English

SETTING UP YOUR TV

There are 3 methods for Wireless Setup:

- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP
encryption.

• Easy Setup (WPS) - If the AP supports WPS,
this method can be used. WPS is an industry
standard designed to make connection of
wireless LAN equipment and security setup
easy. WPS will automatically configure all
wireless settings.

Press B / b to highlight Done and press OK.
NOTE:
• If Network Name is not displayed, see Manual
Setup below to set Network Name before Done
is selected.
• If BACK is pressed before Done is selected,
settings are not saved.

NOTE: WEP encryption may not be able to
configured by easy setup.
• Assisted Setup - follow step 11.
Input the Security Key only.
• Manual Setup, skip to step 12.
Input the all settings.

When the message “Wireless configuration is
complete.” appears on screen, press OK.
The screen will skip to step 13.

NOTE: EXIT is available during settings.

In step 9, when you select Easy Setup;
Press BbC c to highlight Next and press OK.
The Easy Setup screen will appear.
Press c and B / b to select PBC (Push Button
Configuration) or PIN (Personal Identification
Number) and press OK.
Press b to highlight Start Scan and press OK.

Press BbC c to highlight Next and press OK.
The Manual Setup screen will appear. Press B /
b to select Network Name and press OK.
The Software Keyboard window will appear (page
49).
Input the Network Name by using the Software
Keyboard. To save your setting, press the GREEN
button.

PBC - Following the on-screen instructions, push
the appropriate button on your AP. When a window
reporting that the setup is complete appears, press
OK.

Press B / b to select Authentication and then
press c and B / b to select Open System,
Shared Key, WPA-PSK or WPA2-PSK. Press
OK.

PIN - When the PIN code window appears, enter
the displayed PIN into your AP, and then press OK
to continue the PIN Setup. When a message
displays to report that the setup is complete, press
OK.

Press B / b to select Encryption, and then press
c and B / b to select None, WEP, TKIP or AES.
Press OK.

To cancel searching for the AP:
Press BACK while searching for the AP. A message will
appear, and then press C / c to select Yes and press OK.

In step 9, when you select Manual Setup;

In step 9, when you select Assisted Setup;
Press BbC c to highlight Next and press OK.
The Assisted Setup screen will appear.
Press B / b to select the desired AP and press
OK.
NOTE: Check the MAC address on the label of the
AP or in the manual, and select your AP.
Press B / b to select Security Key and press OK.
The Software Keyboard window will appear (page
49).
Input the Security Key by using the Software
Keyboard. To save your setting, press the GREEN
button.
NOTE:
• The Security Key must adhere to these
conditions:

NOTE:
• Certain encryption types are only compatible
with specific authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
- When Authentication is Shared Key, only WEP
or None is compatible.
- When Authentication is WPA-PSK or WPA2PSK, only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be
made until the incompatibility is resolved.
• There is only one key ID to set for WEP
encryption.
Press B / b to select Security Key and press OK.
Input the Security Key by using the Software
Keyboard (page 49).
To save your setting, press the GREEN button.
This item is greyed out when Encryption is None.

SETTING UP YOUR TV

Press B / b to highlight Done and press OK.
When the message “Wireless configuration is
complete.” appears on screen, press OK.

Press OK, and TV Power On Control screen will
appear. Select Disabled or Enabled and highlight
Next.
Quick Setup

TV Power On Control

1/2

Country
Location

NOTE: Settings are not saved if BACK is pressed
before Done is selected.

Network
Smart TV

The Advanced Network Setup screen will
appear.

Channel Tuning

When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On
or Off. (This should usually be set to On.)
When the DHCP function of the router is Off, set
Auto Setup to Off, and set the IP Address DNS
address(es) manually.
Quick Setup

Advanced Network Setup

Location
Network

p
q

3/5

Smart TV
Channel Tuning

IP Address

xxx . xxx . xx . x

Subnet Mask

xxx . xxx . xx . x

Default Gateway

xxx . xxx . xx . x

Auto Setup

xxx . xxx . xx . x

Secondary DNS Address

xxx . xxx . xx . x

Press OK. If the Ant/Cable/Satellite screen
appears, press B / b to select Antenna, Cable or
Satellite, and then press OK to check ( ).

Satellite

• When you select Antenna or Cable, follow step
18 to 21.
• When you select Satellite, skip to step 22.
• When you select Antenna (or Cable) and
Satellite, the Satellite Settings startup screen
will appear automatically after completing the
Antenna (or Cable) scan and pressing OK.

Press B / b to highlight Next.
Press OK, and Network Connection Test will start.

Network Connection Test

If DVB-C is not supported in your area, Cable will
not be displayed.

A message will appear to indicate if the connection
was successful or if could not be completed.

Cable

You can view the fixed MAC address for the TV, if
one is installed.

Disabled
Enabled

Press OK, and Companion Device screen will
appear. Select On or Off from Enable Control and
Media Renderer and highlight Next.

Disabled

Antenna

Primary DNS Address

TV Power On Control

Country
Auto Setup

We recommend you Enable TV Power On
Control for quick access to Toshiba
services. Once enabled you will be able to
view Internet and Menu systems faster.
This mode will result in your TV using
higher power consumption than when
Disabled.

5/5

Network connection was completed successfully.
OK

NOTE: The result of Network Connection Test
does not always guarantee the connection.
To cancel the Network Connection Test:
Press EXIT while testing.
When the network can be accessed, Software
Upgrade starts automatically. When Software
Upgrade is completed, proceed to the next step.

Press BbC c to highlight Next and press OK.
The Auto Tuning start up screen will appear with
the option to select between DTV and ATV, DTV
or ATV if available. Press c and B / b to select
the appropriate mode and press OK.

English

When Encryption is WEP, Key ID setting is
available. Press B / b to select Key ID and press
c and B / b to select 1 (default), 2, 3 or 4.

English

SETTING UP YOUR TV

NOTE:
• None is being used when the satellite dish will
control only one universal Low Noise Block
(LNB) with a single satellite (e.g. Astra 19.2°). As
a rule, most households use just one satellite.
• ToneBurst sends a 22 kHz signal. ToneBurst is
only necessary for simple LNBs (not universal
LNBs). The 22 kHz signal is needed for
switching LNBs with multifeed signals as well as
for changing between low- and high-band.
• DiSEqC 2way automatically switches between
two LNBs, which receive different satellites at the
same time (e.g. Astra 19.2° and Hotbird 13°).
• DiSEqC 4way automatically switches between
up to four LNBs / satellites.
• Single cable is selection and control of plural
Satellite antennas through the combined single
antenna cable.

Press b to highlight Start Scan, and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will
indicate the scan status.
You must allow the television to complete the
search.
Auto Tuning - Antenna
Progress
DTV Tune
ATV Tune

Found

Waiting...

Channel: 23

When the search is complete, the television will
automatically select channel one.
The Auto Tuning screen will display the total
number of services found.

Press C / c to view the DTV (digital channel) or
ATV (analogue channel) lists.

Press B / b to move through the list to select a
channel, and then press OK to view.

The setting LNB Power enables you to switch on
or off the LNB's power supply by means of the TV.
When your satellite dish consists of only one LNB,
LNB Power should generally be activated (On).
When using more than two LNBs, it is
recommendable to use external power supply for
these.

In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.

Satellite Settings
Switch Type

None

LNB Power

REMEMBER: Press TV at any time to select
between ATV and DTV modes.

No.

Satellite

Dish

Astra 19.2E

LNB

Off

NOTE: The time will be set automatically by
transmission but can be advanced or decreased
by using Local Time Setting in the DTV Settings
screen.

3
4

Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add
the satellites that you wish to tune and configure
detailed settings for each one individually.

Done

It is possible to select up to four satellites. Please
note that the number of available LNBs and the
adjustment of your satellite dish determines the
number of satellites found. For example, it is not
possible to receive more than one satellite if your
dish is directed to a single satellite. For further
information on satellite signal technology, please
contact your local dealer.

Select Switch Type and choose the correct switch
configuration for your satellite dish from the
settings None, ToneBurst, DiSEqC 2way,
DiSEqC 4way or Single cable.
Satellite Settings
Switch Type

None

LNB Power

ToneBurst

No.

Satellite

Dish

Astra 19.2E

LNB

DiSEqC 2way

DiSEqC 4way
Single Cable

2
3
4

Done

SETTING UP YOUR TV

Switch Type

None

LNB Power

If your satellite dish is moveable, the following
Positioning screen will appear.

No.

Satellite

Astra 19.2E

Dish
1

Positioning

LNB
1

Transponder

1/120 (10729 MHz V (R))

Go to 0

Go to Stored Position

Step Size

Positioning

Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600

Satellite : Astra 19.2E
Signal Level

30%

Done
Store Position

Once you have selected a satellite, you can
change further settings under Dish and LNB.
Press OK and C / c to select Dish or LNB and
press GREEN button.

Press B / b to highlight Positioning, and then
press C / c to find the dish position with the
strongest signal level.
Press B / b to highlight Store Position and press
OK to store the dish position. Repeat steps 22 and
23 for the next satellite as necessary.

Under Dish you choose the dish type that will be
used (fixed or moveable dish). The majority of
households have a fixed satellite dish.

Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0 % to 100 %. A high signal level
can be achieved by adjusting the satellite dish the
best way possible.

LNB allows you to determine the lower and higher
Local Oscillator Frequency (LOF). Usually, the
factory settings do not need to be changed. You
can find the parameters of the lower and higher
LOF on the specification sheet of your LNB.

Signal Level

Satellite Settings
Switch Type

None

LNB Power

30%

Press B / b to highlight Done and press OK.

No.

Satellite

Dish

Astra 19.2E

LNB

If you select Single Cable in step 22, the Single
Cable Settings screen will appear. You can set
the appropriate value for each item and highlight
Done.

2
3
4
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600

Single Cable Settings
User Slot Number

Done

User Slot Frequency

1284

Password PIN

None

Verify Slot Frequency

Press B / b to highlight Done and press OK.

Done

English

Satellite Settings

English

SETTING UP YOUR TV

If the reception testing completes successfully, the
Auto Tuning startup screen will display.

When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the
Auto Tuning screen.

Auto Tuning - Satellite
Scan Type

Press B / b to select an item and press c and B /
b to select your desired option.

Quick Scan

Search Option

Free to Air

Start Scan

Auto Tuning - Cable
Tuning Mode

You can select Search Option from Free to Air or
All.

DTV and ATV
Start Scan

DTV

When choosing the search option All, all channels
(including encrypted ones) of the satellite will be
searched for. If you wish to only search for
unencrypted (free) channels, please select Free to
Air. In this case, the channel scan will be
completed faster.

Press b to highlight Start Scan, and press OK.
The television will start to search for available
DVB-S channels. The progress bar will indicate
the scan status.
When the search is complete, the Auto Tuning
results screen will display the total number of
services found.

Use B / b to move through the list to select a
channel, and then press OK to view.

c
d
e

Start Frequency
End Frequency

Others
Quick Scan
Auto
Auto

Modulation

Auto

Symbol Rate

Auto

Network ID

Auto

With the exception of DTV Scan Type and DTV
Modulation items, all of the following items will have 2
operating modes. The first is Auto where the values for
each item are preset by the system. The second is an
Input mode where you will be able to enter a single value
in place of the pre-set value. If no channel is currently
tuned and the Input state is chosen, a system default
value will be shown. However, if a channel is currently
tuned when the item is accessed, the value of the current
channel will be displayed.

Operator Selection:
You can choose the Cable operator depending on the
Country you set.

The Quick Setup menu can also be accessed at
any time from the Installation menu.

DTV Scan Type:

From this menu, you can set the RF input configuration.

Scan Type

PLEASE NOTE

Ant/Cable/Satellite (if available)

Operator Selection

Press
icon.

and B / b to highlight Installation

This item determines whether a Quick Scan or a Full
Scan will be executed.
The Quick Scan is a simplified version of the Full Scan
that is designed to complete in less time.

DTV Start Frequency:
This sets the frequency from which the scan will begin.

Press c and B / b to select Channel Tuning and
press OK.

DTV End Frequency:

Press B / b to select Ant/Cable/Satellite and
press OK.

DTV Modulation:

Press B / b to select Antenna, Cable or
Satellite.

DTV Symbol Rate:

Press B / b to highlight Next and press OK.

DTV Network ID:

NOTE: When you attempt to change the Ant/
Cable/Satellite setting, a warning message will
appear followed by PIN entry (if PIN has been set)
and a prompt for Auto Tuning.

This sets the frequency at which the scan will end.

You can choose from five QAM modulation settings.

This is the baud rate (KS/s) of the scan.

This is the Network ID to be utilized for the scan. This item
is greyed out when DTV Scan Type is set to “Full Scan”.

SETTING UP YOUR TV

From the System Setup menu, you can add the satellites
that you wish to tune and configure detailed settings for
each one individually.

To add a satellite:

a
b
c

To edit the satellite settings:

In the Satellite Settings menu, press B to
highlight Switch Type.

Press C / c to select None, ToneBurst, DiSEqC
2way, DiSEqC 4way or Single Cable as your
satellite switch type.

Press b to highlight LNB Power and press C / c
to select On or Off.

and B / b to highlight Installation

Press
icon.

Press c and B / b to select Channel Tuning and
press OK.
Press b to select Satellite Settings and press
OK.

To add a transponder:

In the Satellite Settings menu, press B / b to
highlight the line you want to edit and press OK.

Satellite Settings

Switch Type

Astra 19.2E

None

LNB Power

No.

Satellite

Dish

Astra 19.2E

LNB

Press the GREEN button. The Transponder
Settings screen will appear.

2
3

Transponder Settings

4
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600

Done

d
e

Press b to highlight a new line to add an another
satellite and press OK.

Press b until the required satellite is displayed and
press OK.

Frequency

Polarisation

Symbol Rate

10743

22000

S/S2

10773

22000

10788

22000

10817

22000

10832

22000

10847

22000

10861

22000

10876

22000

Press B to highlight a new line.
Transponder Settings
Frequency

Polarisation

Symbol Rate

12640

22000

To delete a satellite:

12662

22000

12669

22000

12692

22000

12699

22000

12721

22000

12728

22000

b
c

In the Satellite Settings menu, press B / b to
select the satellite you want to delete.
Press the RED button. A confirmation window will
appear.

S/S2
S

Press C / c to select Yes and press OK.

Press OK.
83

NOTE: It is not possible to delete position No.1.

Edit each parameter as required and press OK.
83

1231

English

Satellite Settings

English

SETTING UP YOUR TV

To delete a transponder:

a
b

In the Transponder Settings menu, press B / b
to highlight the line you want to delete.

Auto Tuning

Press the RED button.

NOTE: As new services are broadcast, it will be necessary
to re-tune the television in order to view them.

To edit the Transponder Settings:

In the Transponder Settings menu, press B / b
to highlight the line you want to edit and press OK.

Press C / c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons and B / b if necessary.

Press OK to save your settings.

Repeat steps 1 through 3 for other lines.

Press B / b to select Lower LOF or Upper LOF
and use the number buttons (0-9) to input the
appropriate frequencies.

Press the BLUE button to finish editing and return
to Satellite Settings.

Auto Tuning will completely re-tune the television and
can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be lost.

Press
icon.

and B / b to highlight Installation

Press c and B / b to select Channel Tuning and
press OK.

Press B / b to select Auto Tuning and press OK.
< Channel Tuning

Press the GREEN button to cancel any edits that
were made.

Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning

Press the YELLOW button to reset all transponder
settings to their initial default settings.

DTV Manual Tuning

A message will appear, and then press C / c to
select Yes and press OK.

To select the Dish Type:

In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.

Press C / c to highlight Dish and press the
GREEN button.

Press c and B / b to select DTV, DTV and ATV,
or ATV, if available, then highlight Start Scan and
press OK to continue with the Auto Tuning.
Auto Tuning - Antenna
Tuning Mode

Dish Settings

DTV

Dish Type

DTV
DTV and ATV

Dish : 1

ATV
Fixed
Start Scan

Press c and B / b to select Dish Type. You can
select Movable or Fixed as the Dish Type.

NOTE: If you have selected Others for the
Country field in the Installation menu, and
selected a tuning mode other than DTV, choose
the optimum ATV broadcasting system (B/G, I, D/
K or L).

To select the LNB Settings:

In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.

Press C / c to highlight LNB and press the
GREEN button.

The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning
screen will display the services found.

LNB Settings
LNB : 1
Lower LOF

9750

Upper LOF

10600

Press B / b to move through the list to select a
channel and press OK to view.

SETTING UP YOUR TV

Tuning

< Channel Tuning
Ant/Cable/Satellite

The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the feature
if the television cannot be connected to a media recorder/
decoder with a SCART lead or when you want to tune-in a
station on another System.
Use C / c to move across the screen and select any of the
ATV Manual Tuning options. Then use B / b to adjust the
settings.

Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning

System

Pos.

1 2 3 4 5 6 7 8
1

2
3

5
6

7
8

Press B / b to select the desired position. We
suggest Pos. 0 for a media recorder.
ATV Manual Tuning

ATV Manual Tuning

In the Channel Tuning menu, press b to select
ATV Manual Tuning and press OK.

Position
The number to be pressed on the remote control to
tune the channel.
System
Specific to certain areas.
Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
Skip
Set Skip to On (8) or Off (() for the selected
channel. See page 24.
Signal Class
The channel classification.
Channel
The channel number on which a station is being
broadcast.
Search
Search up and down for a signal.
Manual Fine Tuning
Only used if interference/weak signal is experienced.
See page 89.
Station
Station identification. Use the Bb and C c buttons to
enter up to seven characters.

Channel

S10

S40

C22

C25

C28

C30

Station

Different Channel numbers may be displayed.

c
d

Press OK to select. If the channel chosen for the
media recorder is set to skip, Skip should be
removed before storing.
Press c to select System and press B / b to
change if required.
ATV Manual Tuning
System

Then press c to select Search.

Press B / b to begin the search. The search
symbol will flash.
ATV Manual Tuning
Search

To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.

English

ATV Manual Tuning

English

SETTING UP YOUR TV

g
h

Each signal will show on the television. If it is not
your media recorder, press B / b again to restart
the search.
When your media recorder signal is found, press c
to move along to Station. Use BbC c to put in
the required characters, e.g. VCR.

Skip
To prevent certain channels from being viewed, positions
can be skipped.

a
b

ATV Manual Tuning
Station

Select ATV Manual Tuning from the Channel
Tuning menu.
Press B / b to highlight the position to be skipped
and press OK.
ATV Manual Tuning

Press OK to save.

Pos.

Channel

S10

Repeat for each position you want to tune.

Press EXIT when you have finished.
PLEASE NOTE
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step
3. Enter the Position number, the System, then
C for standard (terrestrial) channels or S for
cable channels and the Channel number. Press
OK to save.

Station

S40

C22

C25

C28

C30

Press c to select Skip.

Press B / b to turn Skip on and press OK.

8 on the screen indicates a skipped position.
ATV Manual Tuning
Skip: On

Press BACK and repeat from Step 2 or press
EXIT.
Each position has to be individually selected. To
turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by PU and
Pu or by the controls on the television but can still
be accessed by the number buttons on the remote
control.

SETTING UP YOUR TV

Channels may be moved and saved to the position of your
choice.

a
b

DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable/
Satellite setting.

Select ATV Manual Tuning from the Channel
Tuning menu.

Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel is
known.

With the list of channels showing, press B / b to
highlight the position to be moved and press c.
Channels
Line No.

Antenna TV

1/10

Pos.

Name

ABC ONE

ABC TWO

ABC THREE

CABC Channel

ABC NEWS 24

Select DTV Manual Tuning from the Channel
Tuning menu and press OK.
DTV Manual Tuning - Antenna
WEAK

AVERAGE

Quality

ABCi

822

Channel

823

Frequency

Press B / b to move through the list to your
preferred position. As you do so, the other
channels will move to make room.

GOOD
67
842.0 MHz
8 MHz

Start Scan

Press C to save your move.
Repeat as necessary and press EXIT.

STRONG

Signal Strength

Bandwidth

English

Sorting positions

Enter the multiplex number using the number
buttons or use C / c to adjust the number up or
down.
Highlight Start Scan and press OK. The television
will automatically search for that multiplex.
DTV Manual Tuning - Antenna
0 New Channels - Total 6
New

Pos.

Name

ABC ONE

ABC TWO

ABC THREE

ABC NEWS 24

ABCi

Type

When the multiplex is found, any channels that are
not currently in the channel list will be added and
the channel information at the top of the screen will
be updated.

Repeat as necessary. Press EXIT to finish.

English

SETTING UP YOUR TV

Manual Tuning for DVB-C

DTV Settings

When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency: Input a specific frequency to be scanned
Modulation: Choose from one of five QAM modulation
options
Symbol Rate: Input a specific baud rate (KS/s) to be used
for the manual scan
Highlight Start Scan and press OK.

Channels (Antenna/Cable)
The channel order may be changed to suit your personal
preference.

a
b

Manual Tuning for DVB-S

Select DTV Settings from the Installation menu
and press OK.
Press b to select Channels and press OK.
< DTV Settings
Channels

When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:

Subtitle and Audio
Parental PIN Setup
Parental Control

DTV Manual Tuning - Satellite
WEAK

Local Time Setting

AVERAGE

Standby Channel Update

STRONG

Common Interface

Signal Strength
Signal Quality
Satellite

POOR
ASTRA 28.2°E

Transponder

1/83

Frequency

10714 MHz

Symbol Rate

22000 KS/s

For your convenience, you can jump to specific
places in the list by one of two methods.

Channels

Free to Air

Line No.

Polarisation
Search Option

Pos.
Start Scan

Antenna TV
1/10
Name

ABC ONE

ABC TWO

Press B / b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search
Option) and press C / c to select the required option.

ABC THREE

CABC Channel

ABCi

Highlight Start Scan and press OK.

822

823

ABC NEWS 24

Line Number Jump — Use the number
buttons (0-9) to input the line number you want to
select and press OK.
It is also possible to change the Position number of
a particular channel.

Renumber — Press the RED button to
renumber the highlighted channel. Edit the
channel number using the number buttons and
press OK. If the position number you input already
exists, a confirmation window will appear.
Pos.

Name
ABC ONE

SETTING UP YOUR TV

you wish to move and press OK to check.
If you wish to move multiple channels at once,
select another channel and check in the same
way. Repeat as necessary.
Once all desired channels have been checked,
press B / b to place the focus at the position to
which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Channels

Line Number Jump — Press the number
buttons (0-9) to input the line number you want to
select and press OK.

Satellite Jump — Press Z / z to jump to the
next channel on a different Satellite.

Renumber — Same as Antenna/Cable
channels. See page 26.

Move — Same as Antenna/Cable channels. See
page 27.

Antenna TV

Line No.

1/10

Pos.

Name

ABC ONE

Position No. Sort — Press the YELLOW
button. A confirmation window will appear. Press
C / c to select Yes and press OK.

ABC TWO

ABC THREE

CABC Channel

ABC NEWS 24

ABCi

822

823

For your convenience, you can edit and sort your
channel list.

Standby Channel Update
If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.

Position No. Sort — Press the YELLOW
button. A confirmation window will appear. Press
C / c to select Yes and press OK.

a
b

Select DTV Settings from the Installation menu
and press OK.
Press b to select Standby Channel Update and
press c and B / b to select On.

Your existing channel order will be lost. Do you wish to
continue?

Yes

Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.

Channels (Satellite)

a
b

Select DTV Settings from the Installation menu
and press OK.

Select Location from the Installation menu.

Press C / c to select Home or Store.

Select Channels and press OK.

Analogue switch-off

The satellite channel list will appear.
Channels

Satellite TV

Line No.

1/10

Pos.

Name

DDD

Satellite
19.2°E

19.2°E

801

BBC

22.5°E

802

22.5°E

803

22.5°E

822

25.6°E

823

25.6°E

This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
This ‘switch-off’ will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is retuned to ensure that existing and new digital services can
be viewed without disruption.

English

Move — Press the GREEN button to activate the
Move feature. Press B / b to select the channel

English

CONTROLS AND FEATURES

General controls

Quick menu item example
Mode

Quick menu item

When viewing a TV
programme or
pictures from the
external input

Quick Menu
Quick Menu helps you access some options quickly, such
as Picture Mode, Picture Size, More Information, Sleep
Timer etc.

Single Window

Press QUICK to open the Quick Menu and use B / b to
select the option.
Quick Menu
Intel® WiDi
Picture Mode
Picture Size

Standard
Wide

3D Settings
More Information
Channel Options
Sleep Timer
HDMI CEC Device Control
Speakers
Headphone Level

Description

Intel® WiDi

See page 64.

Picture Mode

See page 38.

Picture Size

See page 36.

3D Settings

See page 30.

More Information

See page 76.

Channel Options

See page 78.

Sleep Timer

See page 74.

HDMI CEC Device
Control

See page 85.

Speakers

See page 85.

Headphone Level

See page 35.

Wireless Information

See page 46.

Recording
Information

See page 76.

Genre Colour

See page 77.

EPG Update / Cancel
EPG Update

See page 76.

Picture

See page 38.

3D Settings

See page 30.

TV Speakers

When using EPG

Wireless Information
Recording Information

Media Player

NOTE: Quick Menu items are different depending on the
current mode.

Sound

See page 34.

Interval Time

See page 68.

Repeat

See page 68.

Background Music

See page 68.

Play List

See page 69.

Sleep Timer

See page 74.

Speakers

See page 85.

Headphone Level

See page 35.

Selecting channels
To select a channel, use the numbered buttons on the
remote control.
Channels can also be selected using PU and Pu.
To display on-screen information such as channel, input
mode or stereo/mono signal, press
. Press again to
cancel.

The Time Display – analogue only
The time display facility allows the current (text service)
time to be seen on the television screen.
Press D whilst watching a normal television
broadcast to see the time display from the broadcaster. It
will remain on screen for about 5 seconds.
NOTE: This display may not be available in some cases.

CONTROLS AND FEATURES

For DTV programmes
For stereo or dual mono broadcasts, press s and use
C / c to select settings.
Pressing c

Mode Display
Stereo
Dual mono

Stereo S Left S Right
Dual 1 S Dual 2 S Dual

Mono

–

Multichannel

–

Using 3D functions
Before using 3D programming, see and follow
“Important information for 3D viewing” section
on page 100.
Viewing 3D programming requires the
following:
• Toshiba FPT-AG03 (L73*5D/M83*5D : 2pcs supplied,
L73**RK/L73**RB : 1pcs supplied, L73*3D/L73*1D : Not
supplied)
• Compatible 3D playback device or 3D source
• 3D capable high quality HDMI cable

For multi-audio track broadcasts, press s repeatedly to
change the audio language (see “Audio languages” on page
79).

For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
channels are changed, disappearing after a few seconds.
If the broadcast is not in stereo, the word Mono will
appear.
Stereo… Press s to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual
appears, press s to select Dual 1, Dual 2 or Mono.

Viewing 3D images
Incoming video signals can either be in 2D or 3D format.
A 2D signal can be viewed in either 2D or 3D, and 3D can
be viewed in either 2D or 3D. If the TV can detect the fact
that a signal is 3D, it can change to 3D mode automatically
– see “Setting the auto start mode” (on page 31).
Otherwise you can change the viewing mode using the 3D
button. Finally, the format of the 3D signal can be either
Side by Side (SBS) or Top and Bottom (TB). You may
have to choose the correct format if the TV can not detect
it automatically – see “Switching display mode or selecting
3D format”.
Moreover, you can change 2D images to 3D images by
pressing the 3D button when viewing in 2D.
NOTE:
• When 3D format signal is not received, display mode is
not switched to 3D.
• If appropriate mode and format are not selected, 3D
image is not correctly displayed.
• There will be restrictions on the Picture Size settings for
3D Mode and 2D Mode.
• There are individual differences in perception of 3D
images.
• When viewing 3D images, wear the 3D Glasses.
• The 2D to 3D conversion function is activated and
controlled by you according to your personal
preferences.
• The 2D to 3D conversion function is meant for
enjoyment of 2D home video, and other 2D content you
create, in 3D according to your personal preferences.
• The 2D to 3D conversion function is not intended for use
with pre-recorded 2D copyrighted content owned by a
third-party unless the copyright owner has given direct
or indirect permission, or unless applicable law permits
such use.

English

Stereo and Bilingual transmissions

English

CONTROLS AND FEATURES

Switching display mode or selecting
3D format
There are four modes for watching TV.
Mode

To switch to 3D mode:
• Set 3D Auto Start in the 3D menu to 3D.
• Press 3D while viewing 2D mode or Native mode.
Trigger of Switching
Display Mode Press 3D button

Description
Input Signal

3D*

Displays 3D images.

Changes 3D images to 2D.

2D to 3D*

Changes 2D images to 3D.

Native

Displays a received signal format as it is.

Type

Additional
Information

3D
Format
Signal

With 3D
Auto Detect
Information

Format

3D format select
If a right and left images are same in Native mode, select
SBS.
If a top and bottom images are same in Native mode,
select TB. 3D formats are the following.
3D format

Description

Side by Side
(SBS)

Images for the left and right eyes are
positioned side-by-side.

Top and
Bottom (TB)

Images for the left and right eyes are
positioned at the top and bottom of the
screen.

Frame
Packing
(FP) *

Image for the left and right eyes for two
frames are positioned at the top and
bottom of the screen.

Select
2D to 3D

TB
Without 3D
Auto Detect
Information

Select
3D

SBS

* This mode does not support all content depending on its
input source format.

Source
Signal

SBS
TB

2D Format Signal

3D 3D

3D
3D

3D 3D

D
D

D 3

3
3

3D
3D

* Correct 3D image

To select 3D format from the Quick menu in 3D
mode:

Press QUICK to open the Quick Menu.

Press B / b to select 3D Settings and press OK.

Press B / b to select 3D Format Select and press
OK.

Press C / c to select 3D (SBS) or 3D (TB).

* This format cannot be selected manually.
Trigger of Switching
Quick menu
Display Mode

The 3D button's operation
The behaviour of 3D when viewing in Native mode is
different depending on the input mode.

Input Signal
Type

Depending on the input mode, the screen for selecting 2D
or 3D is displayed or the display mode switches between
2D and 3D.

Additional
Info

3D
With 3D
Format Auto Detect
Signal Information

3D Format Select
Format

* Correct 3D image

3D
3D

2D Format Signal

SBS

Without 3D
Auto Detect
Information

Source
Signal

SBS
TB

3D 3D
3D
3D

3D 3D

D
D

D 3

3
3

3D 3D
3D
3D

CONTROLS AND FEATURES

To switch to Native mode:

• Set 3D Auto Start in the 3D menu to 2D.
• Press 3D while viewing 3D mode.

• Press 3D while viewing 3D mode.
• Press 3D while viewing 2D to 3D mode.
NOTE: When 3D format signal with 3D Auto Detect
Information is received, it is not possible to switch to
Native.

Trigger of Switching
Display Mode
Press 3D
button

Input Signal
Type

Additional Info

Format

3D
Format
Signal

With 3D Auto
Detect
Information

3D
3D 3D

SBS

TB
Without 3D
Auto Detect
Information

• From the Quick Menu in 2D mode.

Source
Signal

3D 3D

SBS

In the Quick Menu, press B / b to select 3D
Settings and press OK.

Press B / b to select 2D Format Select and press
OK.

Press C / c to select Native.
NOTE: When Frame Packing is input, 2D Format
Select will be greyed out.

3D
3D

2D Format Signal

3D
3D 3D

To switch to 2D to 3D mode:

* Correct 2D image

Press 3D while viewing 2D or Native mode.

To select 2D format from the Quick menu in 2D
mode:

NOTE: Depending on the input mode, the display mode
switches between 2D and 3D.

Press QUICK to open the Quick Menu.

Press B / b to select 3D Settings and press OK.

Press B / b to select 2D Format Select and press
OK.

Press C / c to select Native, 2D (SBS) or 2D (TB).

Setting the auto start mode
Controls what the TV does when it detects a 3D signal.

Press

Press c and B / b to select 3D Auto Start.

Press C / c to select 3D, 2D, or Off and press OK.

Trigger of Switching
Quick menu
Display Mode
Input Signal
Type

Additional
Info

Format Source SBS
Signal

SBS
TB
Without 3D SBS
Auto Detect
Information TB
2D Format Signal

and B / b to highlight 3D icon.

< 3D

2D Format Select

3D
With 3D
Format Auto Detect FP
Signal Information

English

To switch to 2D mode:

3D Auto Start
2D to 3D Depth

Native

3D PIN

Off

3D Safety Settings

3D Important Info

3D
3D 3D

3D 3D
*

3D
3D

3D 3D

3
3

3D
3D

3D 3D
*

3D
3D

Option

Displays as 3D mode automatically when
3D format signal is received.

Displays as 2D mode automatically when
3D format signal is received.

Off

Displays a screen that allows you to select
3D or 2D when 3D format signal is
received.

* Correct 2D image
NOTE: Take off the 3D Glasses in 2D mode.

Description

English

CONTROLS AND FEATURES

Adjusting 2D to 3D Depth

Setting the 3D PIN code

You can adjust the level of 3D.

A 3D PIN code is necessary for using 3D Safety Settings.

From the Menu:

To enter a new PIN code:

In the 3D menu, press B / b to select 2D to 3D
Depth and press OK.

Press C / c to select 1, 2, 3, 4, or 5 and press OK.

The higher the number, the stronger the 3D effect.

In the 3D menu, press B / b to select 3D PIN and
press OK.
Press the number buttons to enter a 4-digit
number. Confirm the code.
NOTE: PIN code cannot be set to “0000”.

From the Quick Menu:

To change or delete your PIN code:

Press QUICK to open the Quick Menu.

Press B / b to select 3D Settings and press OK.

Press B / b to select 2D to 3D Depth and press
OK.

Press C / c to select 1, 2, 3, 4, or 5 and press OK.

a
b
c

In the 3D menu, press B / b to select 3D PIN and
press OK.
Press the number buttons to enter your 4-digit PIN
code.
Select Change PIN or Delete PIN and press OK.
NOTE:
• PIN code cannot be set to “0000”.
• If PIN is deleted, 3D Safety Settings is greyed
out, and the settings are reset to the factory
default.

The higher the number, the stronger the 3D effect.
NOTE: Depending on the content, setting the 3D effect to
a high level may result in blurring of the image contours
and background.
If you experience any abnormal sensation or feel fatigue
or nausea when viewing 3D images, stop watching and
rest until the symptoms subside. Before viewing again,
adjust the 3D effect to a lower number and view at a level
at which the symptoms do not occur.

Setting 3D Start Message
When this feature is set to On, a message is displayed
onscreen when a 3D signal is received.

In the 3D menu, press B / b to select 3D Safety
Settings and press OK.

Enter your 4-digit 3D PIN code.

Press B / b to select 3D Start Message.

Press c and B / b to select On or Off.

CONTROLS AND FEATURES

When this feature is set to On, you must enter 3D PIN
code for changing display mode.

Displaying 3D Important Info

In the 3D menu, press B / b to select 3D Safety
Settings and press OK.

In the 3D menu, press B / b to select 3D
Important Info and press OK.
A message will appear.

Switching left and right images

Enter your 4-digit 3D PIN code.

Press B / b to select 3D Lock.

The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and
right sides of the 3D image.

Press C / c to select On.

Press QUICK to open the Quick Menu.

Press B / b to select 3D Settings and press OK.

Press B / b to select Left and Right Image.

Press c and B / b to select Swapped and press
OK.

Setting 3D Timer Lock
When the 3D Timer Lock feature is set to On, neither the
PIN input window nor the 3D start message will be shown
while the 3D Enable timer is active, even if a switch to 3D
Mode occurs. This helps to avoid asking for the 3D Lock
PIN and displaying 3D start message every time when
switching to 3D.
NOTE: This feature cannot be selected until the 3D PIN is
set.

In the 3D menu, press B / b to select 3D Safety
Settings and press OK.

Enter your 4-digit 3D PIN code.

Press B / b to select 3D Timer Lock.

Press c and B / b to select On.

Setting Enable 3D Timer
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has
passed, a dialogue will be shown asking you if you wish to
continue viewing or not.

In the 3D menu, press B / b to select 3D Safety
Settings and press OK.

Enter your 4-digit 3D PIN code.

Press B / b to select Enable 3D Timer.

Press c and B / b to select 30, 60, 90, or 120
minutes.

To cancel the timer, select Off.

English

Setting 3D Lock

English

CONTROLS AND FEATURES

Sound controls

TV Mounting (Wall/Table)
Audyssey TV Mounting feature can provide an
appropriate sound depending on the TV installation type,
that TV is installed on a wall or a TV table.

Volume controls and sound mute
Volume
Press 2+ or 2– to adjust the volume.
Sound Mute
Press
once to turn the sound off and again to cancel.

Dual

In the Sound menu, press B / b to select
Audyssey Premium Television and press OK.

Press B / b to select TV Mounting.

Press c and B / b to select Wall or Table.

If a programme or film is being broadcast with a
soundtrack in more than one language, the Dual feature
allows selection between them.

a
b

Press

Dynamic Volume®
Audyssey Dynamic Volume® controls volume levels to
eliminate loud spikes and raise soft dialog for more
enjoyable television and movie viewing.

and B / b to highlight Sound icon.

Press c and B / b to select Dual and press c and
B / b to choose between Dual 1 or Dual 2.

In the Sound menu, press B / b to select
Audyssey Premium Television and press OK.

Press B / b to select Dynamic Volume.

Press c and B / b to select Day, Night or Off.

< Sound
Balance

Bass

Treble

Audyssey Premium Television
Dynamic Range Control
Dual

On
Dual 1

Audio Level Offset
TV Speakers
Audio Description
Digital Audio Output

Balance

Audyssey ABX™

Headphone Level

In the Sound menu, press B / b to select
Balance and press C / c to emphasize left and
right speaker balance.

Audyssey ABX™ technology uses sophisticated driver
analysis and low frequency monitoring to extend the range
and bass of small speakers. This enables the system to
produce lower frequencies that would be possible with a
traditional system of the same size.

In the Sound menu, press B / b to select
Audyssey Premium Television and press OK.

Press B / b to select Audyssey ABX.

Press c and B / b to select the desired
Audyssey ABX level (Low, High or Off).

Bass, Treble

In the Sound menu, press B / b to select Bass or
Treble.

Press C / c to change the setting.

Dynamic Range Control
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).

In the Sound menu, press B / b to select
Dynamic Range Control.

Press c and B / b to select On or Off.

CONTROLS AND FEATURES

English

Audio Level Offset

Headphone Settings

Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV
channel, or an external input. Using the Audio Level
Offset feature reduces these volume differences.

This setting is used to set the sound output when
headphones are connected.

a
b

Speaker
Link

Set the volume level usually used when watching
a DTV 5.1ch programme.
Tune to a channel which is DTV 2ch, ATV or an
external input.

In the Sound menu, press B / b to select Audio
Level Offset and press OK.

Press B / b to select an option, and then press C /
c to adjust the volume level.
< Audio Level Offset
DTV 2ch

ATV

External Input

TV Speakers On/Off
This feature allows you to turn the TV speakers off when
connecting the audio system.

In the Sound menu, press B / b to select TV
Speakers.

Press c and B / b to select Off.

Speakers

Sound is output
(2 ± is available.)

No sound

Off

Sound is output
(Headphone level
menu is available.)

Sound is output
(2 ± is available.)

In the Sound menu, press B / b to select
Headphone Level and press OK.

Press B / b to select Speaker Link and press c
and B / b to select On or Off.

NOTE:
• The available item changes depending on the current
input source. For example, while watching a DTV 2ch
programme, only DTV 2ch is available and the other two
items are greyed out in the menu. This allows you to
easily adjust according to each condition.
• When watching a DTV 5.1ch programme, this feature is
not available.

Headphone

< Headphone Level

Speaker Link

Headphone Level

Off

If you select Off, then highlight Headphone Level
and use C / c to adjust the headphone sound.

Audio Description
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the
story line more fully. The letters AD will be displayed in the
channel banner when programmes contain AD content.

In the Sound menu, press B / b to select Audio
Description and press OK.

Press B / b to select Audio Description and
press c and B / b to select On.

To turn on the built-in speakers:

The AD button on the remote control can also be
used to toggle the Audio Description feature
between On and Off.

Select On in step 2.

To adjust the level of the audio description sound
to the main sound, highlight Mixing Level and
press C / c.
< Audio Description

Audio Description

Mixing Level

English

CONTROLS AND FEATURES

Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of
formats.

WIDE

Use this setting when watching a
widescreen DVD, widescreen video tape or
a 16:9 broadcast (when available). Due to
the range of widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible on the
top and bottom of the screen.

4:3

Use this setting to view a true 4:3 broadcast.

SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.

CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.

SUBTITLE

When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
SUBTITLE

14:9

Use this setting when watching a 14:9
broadcast.

CONTROLS AND FEATURES

English

NATIVE

This setting will show the picture
without overscan, i.e. WYSIWYG.

PC NORMAL

This setting will show the picture
without overscan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.

PC WIDE

This setting will show the picture
without overscan or side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.

Dot by Dot

Press the

“Dot by Dot” is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (e.g. VGA input source).

button on the remote control to display the list of available widescreen formats.

Press the button repeatedly to highlight the required format.
The Quick Menu feature can also be used to select Picture Size.
AV format
Picture Size

PC format
Picture Size

Wide

PC Normal

4:3

PC Wide

Super Live

Dot by Dot

Cinema
Subtitle
14:9
Native

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes
of public display or commercial gain may infringe on copyright laws.

English

CONTROLS AND FEATURES

Picture controls

Picture preferences

Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be
greyed out.

Picture Mode

You can customize current picture mode settings as
desired. For example, while selecting “Dynamic”, if you
change the following items, such as Backlight, Contrast,
Brightness, Colour, Tint, Sharpness and the Advanced
Picture Settings items, your new settings are saved for
“Dynamic” picture mode.

In the Picture menu, press B / b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press OK.

Press C / c to adjust the settings and press OK.

This television offers the choice of personalising the
picture style.
AutoView, Dynamic, Standard, Hollywood Night,
Hollywood Day, Hollywood Pro, Store, Game and PC
are preset options and affect many features/settings
within the television.
NOTE:
• Because the AutoView mode automatically adjusts
picture settings based on ambient light conditions and
input signal content, the Auto Brightness Sensor and
Expert Picture Setting is greyed out when it is
selected.
• Store mode is only available when Location is set to
Store.
• Game mode is available in external input mode (other
than aerial input). When you select Game mode,
suitable widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI
input mode.

a
b

Reset
This feature resets all picture settings to the factory
settings except Picture Mode.

In the Picture menu, press B / b to select Reset
and press OK.

A confirmation message will appear. Press C / c
to select Yes and press OK.

ColourMaster
When ColourMaster is set to On, it allows the ‘Base
Colour Adjustment’ feature to become available.

Press
and B / b to highlight Picture icon
and press OK.

Press c and B / b to select Picture Mode and
press OK.

In the Picture menu, press B / b to select
Advanced Picture Settings and press OK.

Press b to select ColourMaster and press c and
B / b to select On or Off.

< Picture
Picture Mode

Standard

< Advanced Picture Settings

Reset
Backlight
Contrast
Brightness

ColourMaster

0
0

Colour Temperature

Auto Brightness Sensor

Tint

Active Backlight Control

Sharpness

Black/White Level

Colour

Advanced Picture Setting

Noise Reduction

Expert Picture Setting

Resolution+

Display Setting

ClearScan
Reset

Off

Press B / b to select the picture mode you prefer
and press OK.

NOTE: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.

On
Off

Base Colour Adjustment

100

On
High
Middle
On
High

CONTROLS AND FEATURES

Auto Brightness Sensor

The Base Colour Adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an external
source.

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit
ambient light conditions.

a
b

In the Advanced Picture Settings menu, press
B / b to select Base Colour Adjustment and
press OK.

Press B / b to select an option and press c to
move to the adjustment window.

Hue

Saturation

Green

Blue

Yellow

Magenta

Cyan

When the Active Backlight Control feature is activated,
it will control the backlighting levels depending on various
scenes such as picture motion, bright scene or dark
scene.

Brightness

Reset

Edit

Press C / c to select Hue, Saturation or
Brightness and press B / b to adjust the settings
as required.

Red

Hue

Saturation

Brightness

Press B / b to select On or Off and press OK.

Active Backlight Control

Base Colour Adjustment

Red

In the Advanced Picture Settings menu, press
B / b to select Auto Brightness Sensor and
press OK.

In the Advanced Picture Settings menu, press
B / b to select Active Backlight Control and
press OK.
Press B / b to select High, Low or Off and press
OK.
High: To control the backlighting levels depending
on various scenes such as picture motion,
bright scene or dark scene
Low: To control the backlighting levels for dark
scene

Black/White Level

Press BACK to return to the previous menu.

Black/White Level increases the strength of dark areas of
the picture to improve the definition.

To return to the factory settings, select Reset and
press OK.

Colour Temperature

Colour Temperature increases the “warmth” or
“coolness” of the picture by increasing the red or blue tint.

In the Advanced Picture Settings menu, press
B / b to select Colour Temperature and press
OK.

Press B / b to select Colour Temperature and
press OK.

Press B / b to select Cool, Natural or Warm to
suit your preference and press OK.

Press B / b to select Red Level, Green Level or
Blue Level and press C / c to adjust the level.

NOTE: To return the adjustments to the factory defaults,
select Reset and press OK.

In the Advanced Picture Settings menu, press
B / b to select Black/White Level and press OK.
Press B / b to select High, Middle, Low or Off
and press OK.

English

Base Colour Adjustment

English

CONTROLS AND FEATURES

MPEG NR – Noise Reduction
When watching a DVD, the compression may cause some
words or picture elements to become distorted or
pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.

a
b

In the Advanced Picture Settings menu, press
B / b to select Noise Reduction and press OK.

ClearScan
This feature helps to eliminate video shaking.

a
b

This feature allows you to reset the current Advanced
Picture Settings to the default values.

< Noise Reduction

Low

DNR

Auto

Press B / b to select Off, Low, Middle or High to
suit your preference and press OK.

a
b

NOTE: If the picture mode is set to Game or PC, this
feature is not available.

a
b

Select DNR from the Noise Reduction menu.
Press B / b to select Off, Low, Middle, High or
Auto and press OK. The differences may not
always be noticeable (for the best result use lower
settings as picture quality can be lost if the setting
is too high).

NOTE: If the picture mode is set to Game or PC, this
feature is not available.

Resolution +
The Resolution+ feature allows you to adjust the clarity
levels for your desired picture settings.

a
b

In the Advanced Picture Settings menu, press
B / b to select Resolution+ and press OK.

Press OK.

Expert Picture Settings

Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the
menus, regular video will be restored.

In the Picture menu, press B / b to select Expert
Picture Settings and press OK.

Press B / b to select Test Pattern and press OK.

Press B / b to select On and press OK.

RGB Filter
This feature individually enables or disables the red,
green, and blue components of the picture to allow for
more accurate adjustment of each colour.

In the Expert Picture Settings menu, press B / b
to select RGB Filter and press OK.

Press B / b to select Red, Green or Blue to
adjust and press OK.

Press B / b to select On and press OK.

Press B / b to select Colour or Tint and press C /
c to adjust.

Press B / b to select On.

NOTE:
• This feature may not work properly depending on the
content.
• Noise may appear in the picture depending on the
device connected to the TV (e.g. a device with a specific
enhancer function).

In the Advanced Picture Settings menu, press
B / b to select Reset.

This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.

DNR – Digital Noise Reduction
DNR allows you to “soften” the screen representation of a
weak signal to reduce the noise effect.

Press B / b to select High, Middle, Standard or
Off.

Resetting the advanced picture
settings

Press b to select MPEG NR and press OK.

MPEG NR

In the Advanced Picture Settings menu, press
B / b to select ClearScan and press OK.

Press OK.

NOTE: It is not possible to turn off all three colours
simultaneously.

CONTROLS AND FEATURES

English

Colour Decoding

White Balance-10P White Balance

If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.

Press b to select 10P White Balance.

NOTE: The modes excluding Auto (BT.709 and BT.601)
are to convert an irregular signal output from the DVD etc.
with incorrect colour to the optimum state. If BT.709 or
BT.601 is selected with a normal signal received, the
colour may not be correctly displayed. This feature should
normally be set to Auto.

Press B / b to select IRE, Red, Green, or Blue.

Press C / c to adjust and press OK.

a
b

NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)

In the Expert Picture Settings menu, press B / b
to select Colour Decoding and press OK.

Gamma Calibration
Toshiba has integrated picture calibration systems into its
LCD televisions. Now you can enjoy the benefits of
automatically calibrated gamma and white levels.

Press B / b to select Auto, BT.709 or BT.601 and
press OK.

White Balance-Window Display

In order to take advantage of these features the Toshiba
colour analyzer TPA-1 is required.

This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.

In the Expert Picture Settings menu, press B / b
to select Gamma Calibration and press OK.

Press B / b to select Apply Calibration and
press c and B / b to select Enabled and press
OK.

Press B / b to select Auto Gamma Calibration
and press OK.

a
b

In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.
Press B / b to select Window Display and press
c and B / b to select On and press OK.

White Balance-Setting Type
You can choose from two types of White Balance
adjustment.

In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.

Press B / b to select Setting Type and press OK.

Press B / b to select 2P or 10P and press OK.

Connect the USB colour analyzer to the USB 1 or
USB 2 port.
Input the target value and place the USB colour
analyzer over the square on screen.
Auto Gamma Calibration
Please input the target value and place the USB colour analyser over
the square.

White Balance-2P White Balance

Press b to select 2P White Balance and press
OK.
Target Colour Temperature

Press B / b to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or BlueGain.
A white square will appear on the screen.

0.313

0.329

Target Gamma
Start

Press C / c to adjust and press OK.

(D65)

2.4
Reset

Highlight Start and press OK.
Auto Gamma Calibration will start.
Please wait until you see “Auto Gamma Calibration
has been completed.” on screen.

To return to factory setting

Highlight Reset and press OK.

English

CONTROLS AND FEATURES

Automatic Format (Widescreen)

Picture Position

When this television receives a true Widescreen picture
and Auto Format is On, it will automatically be displayed
in Widescreen format irrespective of the television’s
previous setting.

The picture position may be adjusted to suit personal
preference and can be particularly useful for external
inputs.

NOTE: The Picture Position feature cannot be selected
on DTV or PC Inputs.

and B / b to highlight Picture icon.

Press

Press c and B / b to select Display Settings and
press OK.

Press B / b to select Auto Format and press OK.

Press B / b to select On or Off and press OK.

In the Display Settings menu, press B / b to
select Picture Position and press OK.

Press B / b to select an option and press C / c to
adjust the settings and press OK.
The options differ depending on the currently
selected widescreen format and the input signal.
< Picture Position

< Display Settings
Horizontal Position

Auto Format

Vertical Position

4:3 Stretch

Off

Reset

Picture Position
PC Settings

To return to the original factory settings, select
Reset in the Picture Position menu and press
OK.

4:3 Stretch
When 4:3 Stretch is activated, the size switching system
changes 4:3 programmes into full screen picture.

In the Display Settings menu, press B / b to
select 4:3 Stretch and press OK.

Press B / b to select On or Off and press OK.

Picture still
This feature is used to hold a still image on the screen.

Press r to hold an image on the screen, and
press r again to cancel.

HDMI Information Display
When the HDMI Information Display feature is On and
you are watching an HDMI input source, pressing
displays the HDMI signal information banner.

In the Options menu, press B / b to select HDMI
Information Display and press OK.

Press B / b to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate, Aspect, Bit
Depth, Colour Space, RGB/YUV, Chroma Format,
and Content Type (if available).

CONTROLS AND FEATURES

Bluetooth™ and Wireless LAN devices operate within the
same radio frequency range and may interfere with one
another. If you use Bluetooth™ and Wireless LAN devices
simultaneously, you may occasionally experience a less
than optimal network performance or even lose your
network connection.
If you should experience any such problem, immediately
turn off either your Bluetooth™ or Wireless LAN device.
Actual performance can vary, including lower wireless
network capacity, data throughput rate, range and
coverage. Performance depends on many factors,
conditions and variables, including distance from the
access point, volume of network traffic, building materials
and construction, operating system used, mix of wireless
products used, interference and other adverse conditions.

• It is recommended to use IEEE 802.11n on 5 GHz for
HD video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by various
surrounding interference.

Europe Statement
This Built-in WLAN Module may be operated in below
country:

Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio
frequency electromagnetic energy. The level of energy
emitted by Wireless LAN devices, however, is far less than
the electromagnetic energy emitted by wireless devices
such as mobile phones.
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is
safely used by consumers. These standards and
recommendations reflect the consensus of the scientific
community and result from deliberations of panels and
committees of scientists who continually review and
interpret the extensive research literature.
In some situations or environments, the use of Wireless
LAN may be restricted by the proprietor of the building or
responsible representatives of the organisation. Such
restrictions may apply in environments where the risk of
interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of
wireless devices in a specific organisation or environment,
you are encouraged to ask for authorization to use the
Wireless LAN device prior to turning on the equipment.

When using the TV under wireless LAN
environment:
NOTE:
• When Encryption is set to “None”, data transmitted over
a wireless LAN is not securely protected. Unauthorized
users may access your data and network without
appropriate security measures. Selecting an encryption
setting from your Toshiba TV and using a secure
network for wireless LAN transmissions may help avoid
unauthorized access to your important data and/or TV.
Toshiba disclaims any and all responsibility or liability
resulting from any wireless transmissions over the
Internet through your Toshiba TV.
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz for audio and SD video streaming.

Austria

Iceland

Belgium

Liechtenstein

Switzerland

Lithuania

Cyprus

Luxembourg

Czech Republic

Latvia

Germany

Malta

Denmark

Netherlands

Spain

Norway

Finland

Poland

France

Portugal

United Kingdom

Sweden

Greece

Slovenia

Estonia

Slovakia

Hungary

Bulgaria

Italy

Romania

Ireland

Turkey

• If this device is going to be operated in the frequency
range of 5.15 GHz to 5.35 GHz, it is restricted to indoor
use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835
GHz in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the
geographical area within a radius of 20 km from the
centre of Ny-Alesund in Norway.
• Make the wireless LAN appropriate security setting at
the time of wireless LAN use to prevent the illegal use,
spoofing and interception of communications.
• Don't connect wireless LAN to an outside network
directly.
Apply the wireless LAN access point with router function
or broadband router. Make the router appropriate
security setting to prevent the illegal use.
Refer to the manual of router for a security setting.

English

Wireless LAN Information

English

CONTROLS AND FEATURES

Setting up the Network

Easy Setup using PBC (Push Button
Configuration)

You can select the Network Type.

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Wireless Setup and press
OK.

Press B / b to select Easy Setup and press OK.

a
b

and B / b to highlight Network icon.

Press

Press c and B / b to select Network Setup and
press OK.
< Network
Network Setup
Network Device Setup
Smart Apps Setup

< Wireless Setup
Easy Setup

Assisted Setup

Press B / b to select Connection Type and press
c and B / b to select Wired or Wireless.
< Network Setup
Connection Type

Wireless

Wireless Setup

Manual Setup

Press c and B / b to select PBC.

Press b to highlight Start Scan and press OK.

Wired
Wireless

Advanced Network Setup
Network Connection Test

f
d

If you selected Wired, see “Advanced Network
Setup” on page 47.

NOTE: After you change between Wireless and Wired,
switch off and on AC power supply to reset your TV.
Communication may be impossible after the change of
Wireless / Wired.

Wireless Setup
NOTE: Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.

There are 3 methods for Wireless Setup
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make
connection of wireless LAN equipment and security
setup easy. WPS will automatically configure all wireless
settings.
NOTE: WEP encryption may not be able to configured by
easy setup.

When a window reporting that the setup is
complete appears, press OK.

Easy Setup using PIN (Personal Identification
Number)

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Wireless Setup and press
OK.

Press B / b to select Easy Setup and press OK.

Press c and B / b to select PIN.

Press b to select Start Scan and press OK.

Press B / b to select the desired AP and press
OK.

Assisted Setup (setup by using the AP’s
notification information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You will
manually set the Security Key.
Manual Setup (manual input of all settings)

Following the on-screen instructions, push the
appropriate button on your AP.

NOTE: Check the Network Name and/or MAC
address on the label of the AP or in the manual,
and select your AP.

When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays
to report that the setup is complete, press OK.

CONTROLS AND FEATURES

Manual Setup

Press BACK while searching for the AP. A
message will appear, and then press C / c to select
Yes and press OK.

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Wireless Setup and press
OK.

Assisted Setup

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Manual Setup and press
OK.

Press B / b to select Wireless Setup and press
OK.

Press B / b to select Network Name and press
OK. The Software Keyboard window will appear.

Press B / b to select Assisted Setup and press
OK.

< Wireless Setup
Easy Setup
Assisted Setup
Manual Setup

Press B / b to select the desired AP and press
OK.

Press B / b to select Authentication and press c
and B / b to select Open System, Shared Key,
WPA-PSK or WPA2-PSK.

Press B / b to select Encryption and press c
and B / b to select None, WEP, TKIP or AES.

NOTE: Check the MAC address on the label of the
AP or in the manual, and select your AP.

e
f

NOTE:
• Certain encryption types are only compatible
with specific authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
- When Authentication is Shared Key, only WEP
is compatible.
- When Authentication is WPA-PSK or WPA2PSK, only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be
made until the incompatibility is resolved.
• There is only one key ID to set for WEP
encryption.

Highlight Security Key and press OK. The
Software Keyboard window will appear.
Input the Security Key by using the Software
Keyboard (see page 49). To save your setting,
press the GREEN button.
NOTE:
• The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP
encryption.
Highlight Done and press OK.

Input the Network Name by using the Software
Keyboard (see page 49). To save your setting,
press the GREEN button.

h
i

NOTE: If Network Name is not displayed, see
step 3 and 4 in Manual Setup to set Network
Name before pressing Done.

Press B / b to select Security Key and press OK.
Input the Security Key by using the Software
Keyboard (see page 49). To save your setting,
press the GREEN button.
NOTE: This item is greyed out when Encryption is
None.

NOTE: Settings are not saved if BACK is pressed before
Done is selected.

Highlight Done and press OK.
NOTE: When Encryption is None, a message will
appear. Press C / c to select Yes and press OK.

NOTE: Settings are not saved if BACK is pressed before
Done is selected.

English

To cancel searching for the AP:

English

CONTROLS AND FEATURES

Wireless Information

Item

The settings configured in Wireless Setup can be
confirmed.

a
b

Quick Menu
Intel® WiDi
Picture Mode
Picture Size

Standard
Wide

3D Settings

Signal

Connection signal strength with AP
(STRONG/MEDIUM/WEAK)

Speed

Link with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Network
Name

SSID set

Authentication Authentication set

More Information

Encryption

Channel Options
Sleep Timer
HDMI CEC Device Control
Speakers
Headphone Level

TV Speakers
30

Wireless Information
Recording Information

Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the
TV is not connected with the AP.

Press QUICK to open the Quick Menu.
Press B / b to select Wireless Information and
press OK.

Description

Status

When the Network Type is Wireless, a Wireless
Information window will appear.

Encryption set

Security Key

Security Key set

AP MAC
Address

The AP’s MAC address is displayed
when the TV is connected with the AP.

TV MAC
Address

The MAC address of the TV(Wireless)
is displayed.

DHCP

Enabled is displayed when using
DHCP.
Disabled is displayed when not using
DHCP.

IP Address

The TV’s IP address

NOTE: Press the RED button to scan for all APs.
Subnet Mask

Value of the Subnet Mask

Default
Gateway

Address of the Default GATEWAY

DNS

Address of the DNS

NOTE: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value might
be low. It is recommended that Encryption be changed to
AES (see “Manual Setup” on page 45).

Notes on wireless LAN environment
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for
HD video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by various
surrounding interference.

CONTROLS AND FEATURES

NOTE:
• When the DHCP function of the router connected with
this TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto
Setup to Off, and set the IP Address manually.

IP Address Setup
Auto Setup

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Advanced Network Setup
and press OK.

IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway

Off
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx

On
Off

Press B / b to select IP Address.

Press C / c to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press OK.
NOTE: IP address field numbers must be between
0 and 255. After each field number has been set,
press OK to store the entire address. If the entire
IP Address is invalid, a warning message will
appear after OK is pressed.

< Network Setup
Connection Type

Highlight Auto Setup and press c and B / b to
select Off.

Wireless

Wireless Setup

Advanced Network Setup
Network Connection Test

Press B / b to select Subnet Mask, and edit in
the same way as IP Address.
IP Address Setup

Press B / b to select IP Address Setup and
press OK.

Auto Setup

Off

IP Address
Subnet Mask

xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx

Default Gateway

xxx . xxx . xxx . xxx

< Advanced Network Setup
IP Address Setup

DNS Setup
MAC Address

Highlight Auto Setup and press c and B / b to
select On.

NOTE: If you manually set the IP address, you must not
use the same IP address for any other device. The IP
address you use should be a private address.

IP Address Setup
Auto Setup

IP Address

Subnet Mask

Default Gateway

Off

NOTE: Other items will be greyed out when Auto Setup
is set to On.

Manual Setup

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Advanced Network Setup
and press OK.

Press B / b to select IP Address Setup and
press OK.

Press B / b to select Default Gateway, and edit
in the same way as IP Address.

English

Advanced Network Setup

English

CONTROLS AND FEATURES

MAC Address

DNS Setup

You can view the fixed MAC address for the TV (Wired
and Wireless).

NOTE: When the DHCP function of the router connected
to this TV is Off, set Auto Setup to Off, and manually set
the DNS address(es). Your internet service provider
should have provided these to you.

Auto setup

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Advanced Network Setup
and press OK.

Press B / b to select DNS Setup and press OK.

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Advanced Network Setup
and press OK.

Press B / b to select MAC Address and press
OK.

Network Connection Test
This function checks the Internet connectivity.

Press B / b to highlight Auto Setup and press c
and B / b to select On.

NOTE: Other items will be greyed out when Auto Setup
is set to On.

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Network Connection Test
and press OK.

Manual setup

A message will appear to indicate if the connection
was successful or if it could not be completed.

In the Network menu, press B / b to select
Network Setup and press OK.

Press B / b to select Advanced Network Setup
and press OK.

To cancel the Network Connection Test:

Press B / b to select DNS Setup and press OK.

Press B / b to select Auto Setup and press c
and B / b to select Off.

NOTE: The result of Network Connection Test
does not always guarantee the connection.

DNS Setup
Auto Setup
Primary DNS Address
Secondary DNS Address

Off

xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx

Off

Press B / b to select Primary DNS Address.

Press C / c to highlight the field you want to
change, and then use the number buttons to input
the Primary DNS Address. To save the setting,
press OK.
NOTE: DNS address field numbers must be
between 0 and 255. If you input an incompatible
number and press OK, the field number will reset
to the maximum value(255).

Press B / b to select Secondary DNS Address,
and edit in the same way as Primary DNS Address.

Press EXIT while testing.

CONTROLS AND FEATURES

Network Device Setup

You can enter text by using the Software Keyboard. The
Software Keyboard window will appear when you press
OK on a field that accepts character input.

To enter text using the software keyboard:

Highlight the desired character on the on-screen
software keyboard.

Press OK.

Repeat steps 1 and 2 until you have entered all
desired text.

Press the GREEN button to save your settings and
return to the previous screen.

English

Using the software keyboard

Apps Control Profile
Toshiba Apps allow you to control the TV from a network
connected tablet or smartphone (availability is dependent
on country).
In order to use this function, the Setting up the Network
(see page 44) and Device Name Setup (see page 50) are
required. The Device Name will display on the screen of
Apps (tablet or smartphone) application.

New Device Detection

In the Network menu, press B / b to select
Network Device Setup and press OK.

Press B / b to select External Control Setup and
press OK.

NOTE: If BACK is pressed, changes are not saved
and the software keyboard window is closed. The
text will remain as it was before starting the
keyboard.

< Network Device Setup
External Control Setup
Media Renderer

Off

Device Name Setup
Intel® WiDi Setup

Open

Done

1 @./

2 abc

3 def

’

4 ghi

5 jkl

6 mno

;

7 pqrs

8 tuv

9 wxyz

Press B / b to select Apps Control Profile and
press OK.

Press B / b to select New Device Detection and
press c and B / b to select Enabled.

?&#

< Apps Control Profile
Device Registration Setup

Input operation on the remote control:
Button

New Device Detection

Inputs the selected character.

0-9

Selects a character for entry.

BbC c

Moves the character highlight.

RED

Deletes 1 character to the left
of the cursor.

GREEN

Functions as “Done”.

YELLOW

Functions as “Shift” key.

BLUE

Displays the help window.

BACK

Closes the Software Keyboard
window without saving
changes.

Disabled

Enabled
Disabled

Description

Pairing
To use Apps, it is necessary to connect a compatible
tablet or smartphone and this TV to your home network,
and carry out pairing (using a 4 or 8 digit password to
authenticate the device).
Refer to the Apps manual for more details about pairing.
NOTE:
• Pairing with external devices cannot be carried out when
the TV is connected to an unencrypted wireless LAN
access point. Activate the encryption settings for the
wireless LAN access point before carrying out Pairing.
• When the Enable Control is not set to ON in External
Control Setup, Apps functions including Pairing cannot
be used.

English

CONTROLS AND FEATURES

Device Registration Setup

Media Renderer Setup

Once a User Name has completed authentication, it is
stored in the TV along with the password. The upper limit
for the number of Use Names that can be remembered is
20. You can delete User Names that are stored in the TV.

In the Network menu, press B / b to select
Network Device Setup and press OK.

Press B / b to select External Control Setup and
press OK.

Press B / b to select Apps Control Profile and
press OK.

Press B / b to select Device Registration Setup
and press OK.
The Device Registration Setup screen will
appear and the list of Companion Device ID
managed by the TV will be displayed.

Press B / b to highlight the Companion Device
ID.

Press B / b to select the Cancel, All, or Delete
buttons and press OK.

NOTE: When re-registering a device which has been
deleted from the list, registration must be carried out
again.

The TV can be configured as a media renderer.
When operating as a media renderer, the TV displays
content provided by a media server.
The selection of the media is done by media controller.
The TV can play photo, movie, or audio files when
operating as a media renderer.

In the Network menu, press B / b to select
Network Device Setup and press OK.

Press B / b to select Media Renderer and press
c and B / b to select On.

If request comes from media controller, prompt will appear
and the Media Renderer function will start.

To exit the Media Renderer:
Press EXIT.

Terminology
DMS: Digital Media Server
DMR: Digital Media Renderer
DMC: Digital Media Controller
NOTE: You cannot use 3D function in operating as a
media renderer.

Device Name Setup
TV Power On Control (Active
Standby)
When the TV is connected to the home network via
Wireless LAN, with the TV Power On Control in Enabled,
your TV can be turned on by control from Apps.

In the Options menu, press B / b to select Power
Management and press OK.

Press B / b to select TV Power On Control and
press c and B / b to select Enabled (Active
Standby).

NOTE:
• Depending on the device connected to the home
network, it may take a while for the TV to turn on.
• Depending on the device connected to the home
network, this feature may not work.
• If the unencrypted Wireless Setup is done, this feature
can not be used.
• The power consumption during Active Standby is more
than it during Normal Standby.
• After the change from Power On state to Active Standby,
there may be a period of several ten seconds which
does not receive the operation from a remote control or
external apparatus.

The TV’s device name can be changed.

In the Network menu, press B / b to select
Network Device Setup and press OK.

Press B / b to select Device Name Setup and
press OK.
The Device Name Setup screen will appear.

Press B / b to select Device Name and press
OK. The Software Keyboard window will appear.

Input the Device Name by using the software
keyboard (see page 49). To save your setting,
press the GREEN button.
NOTE:
• The Device Name can be up to 15 characters
long.
• Only the 0-9, - and A-Z (uppercase only)
characters may be used for the device name.

Press b to highlight Done and press OK to save
your setting.

CONTROLS AND FEATURES

Setting up the USB HDD for
recording

This function can be used to record and play
digital broadcast programmes (function is
dependant on country selection). Read the
precautions below before recording or viewing
programmes using the USB HDD record
function.

To connect a USB HDD (not supplied):
USB1 or USB2
on the TV

NOTE:
• In order to use this function, a USB HDD needs to be
connected to the TV. Do not use USB Hub.
• After recording operation, time may take to a recording
start.
• Recorded programmes saved on the USB HDD can only
be viewed on this TV. They cannot be viewed when
connected to another TV (including the same model of
TV), a PC, or other device.
• You cannot watch other channel while recording one
channel.
• If the recording time to the USB HDD is too short, no
data may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording
starts.
• Should video or audio recording fail due to malfunction
of the TV or poor reception, no compensation would be
paid.
• If there is a power failure or the power plug is
disconnected during programmed recording, recording
will stop and will not resume when the power returns or
the plug is reconnected.
• Do not disconnect the power plug when the indicator
LED is lit.
• Any changes implemented by the broadcasting station
may affect programme scheduling.
• Scheduling of multiple consecutive programmes may
result in the beginning of each programme not being
recorded.
• Accurate start / finish time for recording is reliant on
broadcasters maintaining correct time stamp if this not
the case the recording will fail.
• Some broadcasters can control whether a program can
be recorded or how long you may be able to view it for
after recording. The on screen message “Retention limit
expired” means that the time limit for viewing the
program has lapsed.
• Programmed recording cannot take place if the power
plug is not connected.
• Disconnecting the power plug during recording may
result in failure to save the recorded programme.
• USB HDD recording feature is not available in all
countries.
• When the USB HDD is formatted, all the data stored on
the HDD will be erased.

USB cable
(not supplied)

USB HDD

When you connect a USB HDD to the USB port on the TV,
a prompt will appear.

Press C / c to select No and press OK.

NOTE: Not guaranteed to work with all USB HDD.

To record DTV programmes
(One Touch Recording)
To record the programme currently being viewed.

Press the REC button on the remote control.
The currently viewed programme will start to be
recorded.

To stop recording:

Press the v (stop) button.
A confirmation window “Do you want to stop
Recording?” will appear.

Press C / c to select Yes and press OK.
Recording will stop.

English

USB HDD Record Function

English

CONTROLS AND FEATURES

How to set recordings via the
Programme Guide
Programmed recording can be scheduled easily using the
Programme Guide or by specifying the date and time.

To search for and record a programme using
Genre Search:

PLEASE NOTE

Press the YELLOW button on the remote control
to access the Genre Search screen.
Genre Search

When a timed programme is about to start, an information
screen will appear offering the option of watching or
cancelling the programme. Other channels will not be
available during the timed programme unless the
programme timer is cancelled.

5:48 Tue, 22 Apr

Movie
34 AB1

It will only be possible to create or edit programme timers
for the currently tuned DTV input.

Hard Rain

Wed,27 Apr 0:15-1:45

31 PARIS PREMIERE

Red Corner

Wed,27 Apr 22:15-23:55

11 NT1

The Lawnmower Man

Thu,28 Apr 1:20-3:00

A Vow to Kill

Fri,29 Apr

1:30-3:00

34 AB1

Parenthood

Sat,30 Apr

0:45-2:40

11 NT1

Body and Soul

Sat,30 Apr

1:15-3:00

31 PARIS PREMIERE

The Nun’s Story

Sat,30 Apr

15:00-17:30

Red Corner

Sat,30 Apr

23:20-1:15

Using the Programme Guide to set future
recordings

11 NT1

The Real Blonde

Sun,1 May

0:40-2:00

31 PARIS PREMIERE

Critters

Sun,1 May

0:40-2:20

11 NT1

Indiana Jones and the Temple of Doom Sun,1 May

21:10-23:20

11 NT1

The jackal

Sun,1 May

23:20-1:15

34 AB1

Coup De Ville

Mon,2 May 1:10-3:00

b
c

Press GUIDE on the remote control to display the
Electronic Programme Guide (EPG).
Press BbC c to highlight the programme you want
to record and press OK.

The Edit Timer screen will appear.
Press B / b to select Timer Type.
Edit Timer

10:50 Tue, 26 Apr

The Daily Politics
2 CABC Channel

Press C / c to select the genre. Programmes listed
will change for the new genre. Press B / b to
select the programme for which you want to
schedule recording.
Press OK. The Edit Timer screen will appear.
Press B / b to select Timer Type.
Edit Timer

10:50 Tue, 26 Apr

11:30 - 12:30 Tue, 26 Apr
The Daily Politics
Timer Type

Set Timer

Recording

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr

Delete Timer

Timer Type

Press c and B / b to select Recording and press
OK.

Press B / b to highlight Set Timer and press OK.

Set Timer

Recording

Delete Timer

Press c and B / b to select Recording and press
OK.

Press B / b to highlight Set Timer and press OK.

CONTROLS AND FEATURES

a
b

To schedule a programme using the
information screen:

Press the BLUE button on the remote control.

Select the unprogrammed column (blank column)
and press OK.
The Edit Timer screen will appear.
Press B / b to select Timer Type.
Edit Timer
Timer Type

5:51 Tue, 22 Apr

Press
, the information screen will appear
giving details of the channel and programme
currently being viewed.
4

CHANNEL Z

D+

English

3D 2D

6:00 Thu, 11 Oct

Side by Side

Reminder

Channel

30 CABC Channel

Date

Tue, 22 Apr 2013

Start Time

10:51

End Time

11:51

Repeat

Once

Set Timer

English

To programme the timer:

Now

MLB Young’s two-run triple leads AL over NL

AD 18

HD 16:9

Delete Timer

News

World News and Sports

Also

MLB Young’s two-run triple leads AL over NL

6:00- 8:00

15 min left
8:00- 9:00

Change

c
d

Press c and B / b to select Recording and press
OK.

Press B / b to go through the list adding the details
of the programme by using the number buttons
and C / c to make selections.

Press B / b to select Next and press OK. The Edit
Timer menu will appear.
Press B / b to select Timer Type.
Edit Timer

10:50 Tue, 26 Apr

The Daily Politics

• Channel
Select the channel you wish to record.

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr
Timer Type

• Date
Select the date that you wish recording to start.
• Start Time
Select the time to start recording.
• End Time
Select the time to end recording.
• Repeat
Select “Once”, “Daily” or “Weekly”.
Once
Daily

Weekly

Set Timer

Recording

Delete Timer

Press c and B / b to select Recording and press
OK.

Press B / b to highlight Set Timer and press OK.

The selected content is recorded once.
The same time slot on the same channel is
recorded every day on and after the selected
day.
The same time slot on the same channel on
the same day of the week is recorded on and
after the selected day.

Press B / b to highlight Set Timer and press OK.

English

CONTROLS AND FEATURES

To check, edit or delete scheduling
information

To view a recorded programme
To view the recorded Library screen and select a title
from the recorded programme list.

You can check, edit or delete scheduling information.

Press GUIDE and then press the BLUE button.
Programme Timers screen will appear.

Recording List

Library / All

Sort : New

Wed, 16 Feb 10:00

WWWWWWWWWWWW

Wed, 16 Feb 10:00

WWWWWWW

Thu, 17 Feb 10:00

WWWWWWW

Thu, 17 Feb 10:00

WWWWWWW

Fri, 18 Feb 10:00
Fri, 18 Feb 10:00

WWWWWWW

Fri, 18 Feb 10:00

WWWWWWW

Sat, 19 Feb 10:00

WWWWWWW
WWWWWWW

3/5

WWWWWW

WWWWWWW

To check a schedule:

Sun, 20 Feb 10:00

1235 ITV London
ASTRA 19.2°E
10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)

Sun, 20 Feb 10:00

WWWWWWW

Sun, 20 Feb 10:00

WWWWWWW

Mon, 21 Feb 10:00

Press B / b to select the title you want to view.
A preview of the content selected can be seen on
the preview screen.
To change the order in which the titles are listed,
press the BLUE button.

Press B / b on the Programme Timers screen to
check the schedule.

To edit a schedule:

14:15 Wed, 16 Feb

All

• Depending on the transmitter information, the
programme broadcast time or other information
may not be correctly displayed in the recording
list.
• The programme does not appear in the
recording list immediately at the start of
recording, but appears a few minutes after
recording starts.
• Up to 64 programmes can be displayed in the
recording list.
• If the channel settings are changed, the digital
channel number, or other information may not
appear correctly in the recording list.
• As the displayed programme time is calculated
from the actual recording information, it may not
match the recording time on the USB HDD.

Press
and highlight My Recordings icon and
press OK. The Library screen will appear.

Press B / b on the Programme Timers screen to
select the title whose schedule you want to edit
and press OK.
The Edit Timer screen will appear. Change the
settings as required, following the same procedure
as for setting the schedule.

Press OK.
Viewing starts.
● icon appears next to the title currently being
recorded.
When the title currently being recorded is selected
and OK is pressed, playback will start from the
beginning of the programme currently being
recorded.

Operations during viewing

Press B / b to highlight Set Timer and press OK.

The following operations can be performed using the
remote control buttons.

To delete a schedule:

a
b

Press B / b on the Programme Timers screen to
select the title whose schedule you want to delete.
Press the RED button.
Press C / c in the displayed confirmation window
to select Yes and press OK. The selected
schedule will be deleted.

NOTE: You can also delete a schedule by selecting
Delete Timer from the Edit Timer menu for each
programming method.

To PLAY

To STOP

To PAUSE/STEP C c

Z
CC

To SKIP-BACK
To REWIND

To FAST
FORWARD
To SKIPFORWARD
To shift playback
position

CONTROLS AND FEATURES

As well as viewing the list of recorded titles on the Library
screen, you can protect or delete titles and register titles to
Personal Mode.

To display the Library screen:

Press
and highlight My Recordings icon and
press OK. The Library screen will appear.
Library / All

Press the RED button. Check boxes will appear
next to the titles.
Press B / b to select the title you want to delete
and press OK. A check mark will be inserted in the
check box.
Library / All

14:15 Wed, 16 Feb

All

All
Sort : New

Sort : New

3/5

WWWWWW

Wed, 16 Feb 10:00

WWWWWW

Wed, 16 Feb 10:00

WWWWWWWWWWWW

Wed, 16 Feb 10:00

WWWWWWWWWWWW

Wed, 16 Feb 10:00

WWWWWWW

Thu, 17 Feb 10:00

1235 ITV London
ASTRA 19.2°E

WWWWWWW

Thu, 17 Feb 10:00

WWWWWWW

Fri, 18 Feb 10:00

10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)

WWWWWWW

Fri, 18 Feb 10:00

WWWWWWW

Thu, 17 Feb 10:00

WWWWWWW

Thu, 17 Feb 10:00

WWWWWWW
WWWWWWW

Fri, 18 Feb 10:00
Fri, 18 Feb 10:00

WWWWWWW

Fri, 18 Feb 10:00

WWWWWWW

Sat, 19 Feb 10:00

WWWWWWW

Sun, 20 Feb 10:00

WWWWWWW

Sun, 20 Feb 10:00

WWWWWWW

Sun, 20 Feb 10:00

WWWWWWW

Mon, 21 Feb 10:00

NOTE:
• A check mark will not be inserted against
protected titles.
• Note that once deleted, a title cannot be
restored.

Select the title of the programme you want to protect and
press the GREEN button.
icon appears next to the title
and the programme is protected.

icon is selected and the GREEN
icon disappears and the programme

To group the recorded programmes

Sat, 19 Feb 10:00

To uncheck all the check boxes, press the BLUE
button.

Protecting a programme prevents it from being
accidentally deleted.

When a title with
button is pressed,
is unprotected.

Fri, 18 Feb 10:00

WWWWWWW

To insert a check mark against all the titles, press
the YELLOW button.

To protect or unprotect a recorded programme:

If Protect is set to On when the programme is recorded,
icon appears next to the title of the recorded
programme.

WWWWWWW

Press the RED button.
Select Yes in the confirmation window and press
OK.
All the titles with check marks will be deleted.

USB HDD capacity
You can check the remaining capacity of the USB HDD
using Remaining Capacity.

Press the YELLOW button. A grouping mode
window will appear.

Thu, 17 Feb 10:00
Thu, 17 Feb 10:00
Fri, 18 Feb 10:00

Week: Grouping the recorded programme by the
day (Sunday - Saturday)
Genre: Grouping the recorded programme by the
genre.

Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 19 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00

b
c

Press QUICK when the Library screen is
displayed.

10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)

Sun, 20 Feb 10:00

To change the title of recorded programme

1235 ITV London
ASTRA 19.2°E

Mon, 21 Feb 10:00

NOTE: The remaining capacity displayed is only a guide;
it is not guaranteed.

Press b to select Title Edit and press OK.
The Software Keyboard window will appear.
Input your desired title by using the software
keyboard (see page 49). Press the GREEN button
to save your settings.

English

To delete a recorded programme:

Operations from the Library screen

English

CONTROLS AND FEATURES

To select the TimeShift Size:

Recording Setup
You can set your preferences for recording.

To select USB HDD and Partition for
Recording:

Press

In the Recording Setup screen, press B / b to
select TimeShift Size.

Press c and B / b to select 512 MB, 1 GB, 2 GB
or 4 GB and press OK.

and B / b to highlight Options icon.

Press c and B / b to select Recording Setup
and press OK.

Press B / b to select Select Device and press
OK. USB HDD and Partition list will be appear.
If USB HDD is partitioned by PC, several partitions
will be displayed.

To use TimeShift recording:
Time Shift recording allows you to pause live TV for a
fixed period of time.
For Example: If you move away from the TV for a short
period, such as when the phone rings while you are
watching TV, you can easily pause live TV and then
continue to view from the same point in the programme
when you return.

< Recording Setup
Select Device
One Touch Recording Time
TimeShift Size

Press W on the remote control while viewing the
DTV programme.
The screen will switch to a still image and
recording will start automatically.
The recording time is decided by TimeShift Size.
If the TimeShift file size reaches the limit set, then
the TV will continue to be paused, but the
recording buffer will be reset to the beginning.

Press c (play).
Catch-up viewing will start from where the
programme was paused.

Press v (stop) to stop the recording.

120 Minutes
4GB

Start Padding Time

None

End Padding Time

None

Device Test
Format Device

Select USB HDD and Partition you want to
recording.

To set the recording time for One Touch
Recording:

a
b
c

Press

and B / b to highlight Options icon.

Press c and B / b to select Recording Setup
and press OK.
Press B / b to select One Touch Recording
Time and press c and B / b to select the
recording time.

To set the padding time for programmed
recording start time and end time:

In the Recording Setup screen, press B / b to
select Start Padding Time.

Press C / c to select a time.
You can select from None, 3 Minutes, 5 Minutes,
10 Minutes, 15 Minutes, 30 Minutes, and 45
Minutes.

< Recording Setup
Programme End Time

Select Device
120 Minutes

30 Minutes

4GB

60 Minutes

Start Padding Time

None

90 Minutes

End Padding Time

None

120 Minutes

One Touch Recording Time
TimeShift Size

Device Test

150 Minutes

Format Device

180 Minutes
210 Minutes

Recording will start at the selected number of
minutes prior to the recording start time.

Press B / b to select End Padding Time.

Press C / c to select a time.

240 Minutes

You can select from None, 3 minutes, 5 minutes,
10 minutes, 15 minutes, 30 minutes, and 45
minutes.

270 Minutes
300 Minutes
330 Minutes

Recording will end at the recording end time plus
the selected number of minutes.

You can set the Programme End Time in 30minute increments in the range of 30 minutes to
330 minutes.

CONTROLS AND FEATURES

In the Recording Setup screen, press B / b to
select Device Test and press OK.
USB HDD operation test will start.
Wait until the test ends.

NOTE: The results of the device test are only a guide. The
device may not function as shown in the results.

To format a USB HDD:

In the Recording Setup screen, press B / b to
select Format Device and press OK.

Press C / c to select Yes in the confirmation
window that will appear and press OK. Formatting
will start.
Wait until formatting ends.

NOTE:
• If the USB HDD is separated several partitions by PC
and multiple Partition appear on the Device List screen,
press B / b to select the Partition you want to format.
• When the USB HDD (or Partition) is formatted, all the
data stored on the USB HDD (or Partition) will be
deleted.

Scheduling priority
If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When Start Padding Time and End Padding Time are
set (see page 56), the start time and end time will be the
time plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording
will switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may
not be recorded.

Using the Cloud TV Service
Toshiba's universal portal for internet content
and services (services are dependent on
country).
NOTE: You need to configure a home network before
using this feature (see page 12).

a
b

Press
.
The menu screen of the Cloud TV service will
appear.
Press BbC c to select a Cloud TV service, and
press OK.
For the operations of the Cloud TV service, refer to
Cloud Guide.

Using Web Browser
The web browser on this TV lets you explore everything
the web has to offer. Along with access to popular places,
you'll be able to search for and browse your favourite sites.
NOTE:
• Certain services may not be currently available in your
area.
• Your registration or login may be required to use some
services.
• Third party internet services are not provided by
Toshiba, may change or be discontinued at any time and
may be subject to Internet service provider restrictions.
Toshiba makes no warranties, representations, or
assurances about the content, availability or
functionality of third-party content or services. Use of
third party Internet services may require the creation of
a separate account through a computer with Internet
access and/or payment of one-time and/or recurring
charges and membership.
Not all third party services may be available on or
compatible with this product. In order to experience the
full suggested capabilities of this product, fullycompatible devices may be required.
- does not support platform-dependent technologies
such as Active X.
- only supports preinstalled plug-ins.
- may not support media formats other than the
following: JPEG/PNG/GIF.
- uses a single built-in font. Some text may not be
displayed as intended.
- does not support downloading of files or fonts.
- is a TV browser. It may work differently than PC
browsers.
- does not support parental control or locks in the
content, and it is the responsibility of the you to monitor
browser usage by minors.
• Some pages may not be displayed correctly or may
display differently on different devices.
• Certain services may not be available in your area.

English

To perform a USB HDD operation test:

English

CONTROLS AND FEATURES

To use the web browser

To browse favourite websites

NOTE: You can change the mouse mode (Mouse
Emulation or Navigation) by pressing the GREEN button
on the remote control when the web contents screen is
open.

a
b
c

Press
on the remote control and select
Internet icon to open the web browser.

c
Press BbC c to select the URL address bar and
press OK.

d
Enter the desired URL address by using the
Software Keyboard (page 49).

You can now browse websites on your TV using
BbC c buttons on the remote control.

By adding frequently visited websites to Favourites, you
can browse them easily. You can view the addresses of
the websites you visited previously.

b
c
d
e

Select the item or folders to move to the desired
URL address and press OK.
You can now browse websites on your TV using
BbC c on the remote control.

When viewing the web browser page, currently airing
programmes or images from external inputs can be
displayed in a PIP window (sub-screen).

To Add Favourites Websites

Use BbC c to select Favourites STAR and press
OK.

PIP (Picture-in-picture) function

Press the GREEN button on the remote control.

Press
on the remote control and select
Internet icon to open the web browser.

Press the RED button while viewing the web
browser page.
The currently airing program or images from
external inputs are displayed in a PIP window.

NOTE:
• The position of the PIP window, and whether it is
displayed or not can be set in the web browser settings.
• PU and Pu buttons cannot be used when the PIP
window is displayed.
• Images in the PIP window cannot be displayed in 3D.
• Images from 3D signals will not be displayed in the PIP
window.

Press
on the remote control and select
Internet icon to open the web browser.
Enter the desired URL address by using the
Software Keyboard (page 49).
Press BbC c to scroll Favourites STAR on the
Toolbar and press OK.

To stop displaying the PIP window:
Press the RED button when the PIP window is displayed.

Press OK to save the desired website to your
Favourites.
Press BACK on the remote to return to browsing
your website.
You can press the GREEN button on the remote
for thumbnail view of all your Favourites.

NOTE: The desired website is highlighted and displayed
on the top row with the + icon. The + icon will change to a
page icon after the website has been saved to Favourites.

CONTROLS AND FEATURES

Skype-ready Toshiba TVs bring your family and friends
closer to your home. Skype on your Toshiba TV allows
you to share special moments no matter the distance.

Getting started

Press

Press BbC c to select Skype icon and press OK.

Before using Skype - Preparation

on the remote control.

“Welcome to Skype” screen appears.

• Connect the FREETALK HD Camera: TALK-7291 to the
TV’s USB terminal. Do not use a USB hub.
For a Skype-ready Toshiba TV compatible camera,
please visit the following website:
http://shop.skype.com
• Arrange the HD camera on top of the TV, ensuring it's in
the centre.
• Connect to the network.
NOTE:
• The HD camera is sold separately.
• Do not connect a camera other than the recommended
HD camera.
• Using a wireless network may result in degraded call
quality.
• Some of the features available on other versions of
Skype are not available on the television.
• When using Skype, some functions of the TV will not be
available.
• The sound settings are switched to Skype mode.
• If you cannot hear the person you're speaking with,
check your TV volume.
• When Optical Digital output or Analogue output is used
and you are signed in, the ring tone may not sound.
• The volume level on Skype may differ from other
features on your TV.
• When the Reset TV feature is used from the TV Menu,
Skype information is reset to factory default settings.
• Screenshots used in this manual may differ from the TV
Menu, Skype will be reset to its factory default settings.

English

Using Skype

Welcome to Skype
Skype Name Press [OK]
Password Press [OK]
Sign in when Skype starts
Start Skype when TV starts

Create Account

You can select a Skype name from the Skype
Name drop down menu.

Select Sign in or Create Account.

To create a new account:
If you do not already have a Skype account, you can
create a new one from your TV.

Select Create Account in the Welcome to Skype
screen and press OK.
Create new Skype account
Full Name 1~70 characters
Skype Name 6 and 32 characters
Password 6~20 characters
Repeat Password 6~20 characters
Email Press [OK]
Yes, send me Skype news and special offers.
I have read and accept.
the Skype Terms of Use
the Skype Privacy Statement

No emergency calls with Skype
Skype cannot be used for emergency calls.

I agree - create account

Cancel

Create new Skype account
Full Name 1~70 characters
Skype Name 6 and 32 characters

“

(

)

{

+
}

Alt

Enter

English

CONTROLS AND FEATURES

Enter your Full Name, Skype Name, Password,
Repeat password, and Email.
• If you want to receive Skype news and special
offers, check the selection box. Skype will inform
users about new products, features and special
offers by email.

Basic Operation
Press B / b to select a tab (Contacts/People, Recent,
Settings). Press c and B / b to select a contact from the
list.
Your contact list will contain the following information:
Contact name / Current online status / Profile picture /
Mood message
Your profile picture, status, Skype Name, mood message and
available Skype Credit.

Select “I agree - create an account” and press
OK.

Name

- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

You'll now be signed into your new account.

Contacts/People
Name Name

NOTE:
• Please ensure that you have entered your email address
correctly. It is required in case you lose or forget your
password.
• If you forget your password, visit skype.com to retrieve
it.
• If a message appears informing you that the entered
Skype name is already registered, please choose a
different name.

TextTextTextTextTextTextTextTextText

Name Name
TextTextTextTextTextTextTextTextText

Name Name
TextTextTextTextTextTextTextTextText
+8888888888888

Status

If you have a Skype account, sign into Skype in the
Welcome to Skype screen.

The current status for each of your contacts are explained below:
: Online
: Offline
: Do not disturb

Enter your Skype Name and Password.

: Away
: Phone number
: Offline with voice messaging or
call forwarding enabled

Select Sign in and press OK.
• If “Sign in when Skype starts” is checked, your
account will sign in automatically when you
launch Skype from the menu.
• If “Start Skype when TV starts” is checked,
your account will sign in automatically when you
turn on the TV.
Both these options can be selected together.

Exit

Status: Change your availability status
Add Contact: Add a Skype account or phone number
EXIT: Return to previous screen. When at contact list, the EXIT
button will close Skype application without sign out.

To Sign into Skype:

Add Contact

Tab

Contacts/People
Press B / b to select Contacts/People tab. Press c and
B / b to select a contact.
When pressing OK at each contact, the following functions
will appear:
No blocked contactor
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
Contacts/People
Name Name

Name Name

TextTextTextTextTextText

Name Name
TextTextTextTextTextText

Video call

Voice call

View Profile
Send a Voice Message
Block
Remove

+8888888888888

Status

Add Contact

Exit

Initiate Video Call
Initiate Voice Call
View Profile
Send Voice
Message
Block
Remove

- View contact profile (including Skype name, full
name, birth date, gender, location, mobile
number and email).
- Send Voice Message to contact
- Block / unblock contact
- Remove contact from list

CONTROLS AND FEATURES

Incoming call

Press BbC c to select Video call or Voice call, your
screen will now display your call as shown below.

Incoming calls on Skype will be displayed on the bottom
right hand corner of your TV screen. You'll also hear a ring
tone which can be adjusted using the VOLUME buttons on
your remote control.

Video call
Own side

Other side

Incoming Call...
Name

Video

Voice

Decline

You are given three options when an incoming call arrives:
• Video : Answer by video call.
• Voice : Answer by voice call.
• Decline: Decline the incoming call.

Voice call
06:34:45
xxxx

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

NOTE: If other applications are active or recording, you'll
only get an “Incoming call notification“ until the application
or recording has stopped.

Status

Below is all icon pictures in conversation window.

When you press the GREEN button, the change status
window will appear as below. You can change your status
by pressing B / b and OK. Press BACK to exit.
Name

Start video

- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

Stop video

OnlineContacts/People

Name Name

Resume the call

Away
Do not disturb

Name Name

Unmute the webcam mic

Invisible

TextTextTextTextTextTextTextTextText

Sign Out

Mute the webcam mic

TextTextTextTextTextTextTextTextText

Name Name
TextTextTextTextTextTextTextTextText

Normal size video

+8888888888888

Full screen video

Status

Open dial pad
End call (Hang up the call)

Group calls
Using your Toshiba TV, you can join Skype group voice
and video calls. However, you can only send and receive
audio whilst on these calls.
NOTE: You must be invited on to a group call, you cannot
initiate it from the TV.

Add Contact

Exit

English

Video or Voice call

English

CONTROLS AND FEATURES

Add Contact

When you receive a contact request, a pop-up menu will
appear where you can choose to Accept, Block or
Decline the request.

You can add contacts to your list of contacts.
When you press the YELLOW button, the Add Contact
Type menu window will appear.

Press B / b to select and press OK.
Request Form

Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

ms_audi

Contacts/People
Add Contact Type
Name Name

john5678236

TextTextTextTextTextTextTextTextText

Name NameSkype Contact

TextTextTextTextTextTextTextTextText

Name NamePhone Number
TextTextTextTextTextTextTextTextText

Name Name

Exit

Exit
TextTextTextTextTextTextTextTextText
+8888888888888

Press C / c button to select and press OK.
Status

Add Contact

Exit

ms_audi

Two sub-functions are supported.
Press B / b to select Skype Contact or Phone Number
and press OK.
• Skype Contact
Enter the Skype Name of the person you're looking for.
The search result will show up after get response from
Skype server.
• Phone Number
You can also enter a phone number in the search
window.
Contact Search Results

Hello! Please add me to your Contacts.

Block

Decline

Recent
You can see a list of past events in “Recent”.
Press B / b to select the Recent tab. Press c and B / b
to select an item and press OK.

Add a Skype contact
Search Result: (jackyding)
Full Name

Skype Name

Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

Country

Aaaaaa_0101

USA

Bbbbbb007

Cccccc0709

Cccccc A01

Name Name
Tue Jul 3 04:07:47 2012

Ddddddd

Ddddddd Ddd

Taiwan

Name Name

Recent

Eeeeee_Eeee

EE_Eeeee

Japan

Tue Jul 3 03:44:58 2012

Ffffffffff_Fu

Ffffffffff_Ff

Taiwan

Name Name

Gggggg_Ggg

Taiwan

Mon Jul 2 10:01:11 2012

Name Name
Duration 00:10:00

Duration 00:00:00

Duration 00:01:06

Name Name

Back

Mon Jul 2 06:36:49 2012

Duration 00:03:04

Name Name

You can send a contact request to a person displayed in
the search results. Press B / b to select a person and
press OK.
Notification of authorization request
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

Tue Jun 28 03:30:17 2012

Duration 00:00:08
Status

Add Contact

Exit

Each call has an icon with it. The meaning of each icon is
as follows:
Icons

Description
Incoming call

TextTextTextTextTextTextTextTextText

Name Name
TextTextTextTextTextTextTextTextText

Outgoing call

Name Name
TextTextTextTextTextTextTextTextText

Name Name

Missed call

Notification

+8888888888888
You have received a contact request.

Status

Voice call

Press C / c to select Video call or Voice call.

Contact List
Name Name

TextTextTextTextTextTextTextTextText

Video call

View Profile
Send Voice Message
Listen to Voice Message
Add to Contacts
Delete This Item

Unread Voice Message

Voice message

CONTROLS AND FEATURES

Settings

You can call mobiles and landlines from this screen.

Press B / b to select the Settings tab and press OK.

Press B / b to select the Dialer tab. Press c and B / b
to navigate this screen.

The Settings window will appear.

Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit

User Profile

(1/2)
Gender
General Settings

Please input the country code
-Select One-

Audio Settings
+886

Tajikistan

+992

Tanzania

+255

Thailand

Name Name

Change Password

Dialer

Taiwan

English

Dialer

Privacy Settings

+670

Togo

+228

Birth Date

(D)

Country/Region

-Select One-

State/Province

Press [OK]

City

Press [OK]

(M)

(Y)

Blocked Contacts
Home Phone

Press [OK]

Call Settings

Office Phone

Press [OK]

About Skype

Mobile Phone

Press [OK]

+66

Timor-Leste

-Select One-

Exit
Status

Add Contact

Exit

Select the country or region first, and then enter the phone
number with area code. You'll need a little Skype Credit in
your account to call mobiles or landlines using Skype.
Emergency calls over Skype are not supported.

You can change the following settings:
• User Profile
Add or change your personal information e.g. birth date,
country/region or phone number.
• Change Password
You can change your password by entering your
existing password and new password twice.
• General Settings
Select whether Skype should automatically start when
turning on the TV.
• Audio Settings
Adjust the speaker / ringtone volume manually.
The volume of your speakers will be different on Skype
compared to your normal TV volume level. The speaker
volume range is 0 - 100 % by 1 steps, and ringtone
volume is 0 - 100 % by 25 steps.
• Privacy Settings
Set who you allow calls from, whether it's Anyone or
People in my Contact list only.
• Blocked Contacts
If you do not want someone to reach you, simply block
them by entering their Skype Name or phone number
from this menu. Successfully blocked contacts are
displayed in this window.
• Call Settings
If you're not signed into Skype, you can forward
incoming calls to another phone number or Skype name,
or choose to accept voice messages. However you'll
need to have Skype Credit to turn this feature on.
• About Skype
Displays information about Skype.

English

CONTROLS AND FEATURES

Using Intel® Wireless Display

Using Hybrid TV Standard
(if available)

Intel® Wireless Display (Intel® WiDi) is
supported on this TV. You can use your TV as
second display for PC with Intel® Wireless
Display.

Hybrid TV Standard enables the TV to receive
HbbTV services. TV services which support this
feature often show “press RED” on the screen.
NOTE: You need to configure a home network before
using this feature (see page 12).

Press

Press c and B / b to select Hybrid TV Standard.

Press c and B / b to change from Disabled to
Enabled and press OK.

and B / b to highlight Options icon.

When “press RED” is indicated on the screen,
press the RED button to access HbbTV service
site, and then press BbC c to select the desired
contents.
NOTE:
• The HbbTV service indication or required key operations
may not be possible depending on the service contents.
In this case set the Hybrid TV Standard setting to
Disabled.
• Toshiba makes no warranties, representations, or
assurances about the content.

Press QUICK to open the Quick Menu.

Press B / b to select Intel® WiDi and press OK.
A prompt will appear on the screen. Select Yes.

Launch the Intel® WiDi software on your PC and
select “scan for available adaptors”.
Intel® WiDi device name and ID list will then be
displayed on the PC screen.
Select the TV which you wish to connect to.
“Connecting” will be shown on the TV.

Connecting your PC to your TV the first time
When selecting the Toshiba TV for the first time, a
4-digit or 8-digit code will appear on your TV
screen. This code needs to be inputted into your
computer to authenticate the connection.
If authentication has already taken place
“Connected to Intel® WiDi. Please Wait” will
appear on screen.

After the Intel® WiDi connection is complete, the
TV screen will mirror the content shown on the PC
screen.

NOTE:
• When connecting Intel® WiDi, PC must have power
turned on.
• When the Intel® WiDi software is active, and the
Connection Type is set to Wireless, other applications
may not be usable.
• Intel® WiDi device name of the TV can be changed from
the Intel® WiDi software.
To exit Intel® WiDi:
Exit Intel® WiDi by pushing the disconnect button on Intel®
WiDi software or by pressing EXIT on the TV remote
control.
NOTE: If the PC has been inactive for some time, the
Intel® WiDi connection will be disconnected automatically.

CONTROLS AND FEATURES

The TV's Intel WiDi device name can be changed.

In the Network menu, press B / b to select
Network Device Setup and press OK.

Press B / b to select Intel® WiDi Setup and press
OK.

Press B / b to select Intel® WiDi Device Name
and press OK.

Select Intel® WiDi Device Name and press OK.
The Software Keyboard window will appear.

e
f

Terminology:
DMP: Digital Media Player
DMS: Digital Media Server
DMR: Digital Media Renderer
DMC: Digital Media Controller

Input the Intel WiDi device name by using the
software keyboard (see page 49). Press the
GREEN button.
Highlight Done and press OK to save your setting.

Device List
Device List displays a list of MAC addresses for previously
connected device that have been connected before. The
maximum number that can be stored is 20.
If the list run out of space, the least-recently-used MAC
address will be deleted and the new MAC address added
automatically.

This TV allows you to enjoy movie, music and
photo files stored on a USB device connected to
the USB port.
Moreover, you can also play photos, movies or
music files from your PC by connecting the TV
to your home network.

In the Intel® WiDi Setup screen, highlight the
Device List and press OK.
Device List will appear.

• DMP: The TV can control and play content from a DMS.
- A DMS is a device that can function as a server for
DMP or DMR.
• DMR: The TV can play content from a DMS. Playback is
controlled by a DMC.
- A DMC is a device that can instruct the TV to play
content.
NOTE:
• Do not insert/remove USB device while in use.
• MENU is not available during playback.
• When you want to use your TV as a media renderer, set
Media Renderer to On (see “Media Renderer Setup” on
page 50).

Media Player Specifications
Device
USB device
Interface version: USB2.0 HS

The registered MAC Address can be deleted one by one
by pressing RED key in the List.

USB Mass Storage Class devices (MSC)

When doing so the following text can be seen “Do you
want to unregister this device? Yes/No” (default cursor is
“No”).

NOTE:
•Connectivity is not guaranteed for all devices.
•Incorrect behaviour may occur with a USB hub
connection.

File system: FAT16 and FAT32
Maximum memory size: Depend on file system
You must obtain any required permission from
copyright owners to download or use
copyrighted content. TOSHIBA cannot and
does not grant such permission.

English

Using the Media Player

Intel® WiDi Device Name

English

CONTROLS AND FEATURES

To select a file in the list of contents:

Basic operation

Using Media Player with USB

When Auto Start is enabled, you will be asked if
you want to start the Media Player whenever a
USB device is inserted. If Auto Start is disabled
(or if you want to connect to a media server on the
network), you must manually start the Media
Player from the menu.

Press BbC c to select a file or folder.
Press OK to move to the next layer, or press
BACK to return to the previous layer.
When you select a file, press OK to play or view.

To move to the tab selection:

To change the Auto Start setting:

To close the Media Player:

Press

and B / b to highlight Options icon.

Press c and B / b to select Media Player Setup
and press OK.

Press B / b to select USB Auto Start and press
OK.

Press B / b to select On or Off.

Press the BLUE button.

Press EXIT.

Using the Media Player with a media server
You need to configure a home network before
using this feature (see page 12).

Press
and select My Music, My Videos, My
Photos or My Contents icon and press OK.

Auto Start

Insert a USB device into the USB port on the left
side of the TV. A prompt will appear.

Press C / c to select Yes and press OK.

Press B / b to select Videos, Music or Photos
and press OK.

d
e

Press BbC c to select Device Name icon and
press OK.

Press B / b to select a device and press OK.
List of Contents
Videos
Devices:

Music
CTV-5

Press BbC c to select Devices and press OK.

Photos

Search
Sort: Title

Date
Video

Press B / b to select a device and press OK.

NOTE: If Auto Start is set to Off, you can start the Media
Player manually.

23:59, Wed, 31 Dec 1969

Music

23:59, Wed, 31 Dec 1969

Photos

23:59, Wed, 31 Dec 1969

User Files

23:59, Wed, 31 Dec 1969

Manual Start

a
b

Insert a USB device into the USB port on the left
side of the TV.
Press
and select My Music, My Videos, My
Photos or My Contents icon and press OK.

Press BbC c to select Devices and press OK.

Press B / b to select a device and press OK.

Videos, Music and Photos files and folders are displayed
in the list of contents.

To select a file in the list of contents:

a
b

Files are displayed in the List View according to the
category (Videos, Music or Photos) and device you last
selected.

Press BbC c to select a file or folder.
Press OK to move to the next layer, or press
BACK to return to the previous layer.
When you select a file, press OK to play or view.

CONTROLS AND FEATURES

Viewing photo files (on a media
server or USB device)

You can sort files by file name (title) or date
accordingly.

Press BbC c to highlight Sort and press OK.

Press B / b to select File Name (Title), New or
Old and press OK.

There are two types of viewing modes.

Photos List (USB and Network Player Photo)
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each
image file.

To Search for content (if available):

a
b

Photos

Search
Sort: File Name

Boulder002HD.jpg
01:00, Fri, 28 Dec 1984

The initial highlighted position will be on the top left
thumbnail in the Photos List.

Select Devices and Category and press OK.
The list of search result will appear.

Press QUICK to open the QUICK Menu.

Press B / b to select any of the following item.
Using with DLNA: Device Information
Using with Wireless: Wireless Information

NOTE: The page down function on the last page
and page up function on the first page are not
available.

To close the Media Player:
Press EXIT.

Press BbC c to move the highlight in one
window.
or
buttons can be used to page up/down the
Photos List when there are more photos than will
fit onto one screen. When the
or
buttons are
pressed, the highlight shall be on the photo at the
top left of Previous/Next Photos List.

To display the Device Information or Wireless
Information:

Music

/DCIM

Select the text box and press OK, the Software
Keyboard window will appear (page 49). Input
keyword by using the Software Keyboard and the
search will search for:
Network
Videos: Title name
Music: Title name/Artist name/ Album name
Photos: Title name
USB
Videos/Music/Photos: File name.

Videos

Devices: /usb/sda1

Press BbC c to highlight Search and press OK.

When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
Press OK to view the selected photo in Single
View mode.

English

To sort files (if available):

English

CONTROLS AND FEATURES

Single View (USB and Network Player Photo)

Selecting the Playback Mode:

In this mode, only files located in the selected directory will
be displayed. This view allows you to change the photo
content manually. When moving from Photos List to Single
View, the currently selected photo will be displayed.

You can view 3D photos in 3D and you can also view 2D
photos in 3D.

a
b

Press c to view the next photo. Press C to view
the previous photo.
Press
to display file status information (file
number, photo title, resolution etc.).

Press 3D on the remote control while in Single
View mode or Slide Show mode.
The mode switches between 2D Mode and 3D
Mode each time 3D button is pressed.

2D Mode: All photos are displayed in 2D.

NOTE: The information may not be correctly displayed
depending on the contents or the devices.

3D Mode: The photos are displayed in the 3D mode
selected in the Playback Mode. For the Playback Mode,
refer to the following:

Slide Show (USB and Network Player Photo)

Setting the Playback Mode in Quick Menu:

This view allows you to watch a slide show of your photos.
In this mode, only files located in the selected directory will
be played.

Press QUICK to open the Quick Menu.

Press B / b to select Playback Mode.

Press c and B / b to select 3D Mode 1 or 3D
Mode 2.

a
b
c

To start Slide Show, press OK in the Single View
mode.
Press C / c to view the previous/next photo.
Press
to display file status information.
Press OK to return to Single View.

3D Mode 1: 3D photos in the USB memory are displayed
in 3D. 2D photos are displayed in 2D. Some 3D photos
cannot be displayed in 3D.

To set Interval Time and Repeat settings:

3D Mode 2: All photos are displayed in 3D. 2D photos are
converted and displayed in 2D to 3D, and 3D photos are
displayed in 3D.

To set Background Music (USB only):

Press QUICK to open the Quick Menu.

Press B / b to select either Interval Time or
Repeat.

Press c and B / b to adjust the setting and press
OK.

a
b

B button: Clockwise rotation
b button: Counterclockwise rotation
NOTE: You can not rotate in 3D (2D to 3D) mode.

Press B / b to select Background Music and
press c and B / b to select On.
The music file in the same folder as the displayed
photo will start playing.

To rotate the image:
While viewing the image in Single View or Slide Show
mode, the image can be rotated 90°.

Press QUICK to open the Quick Menu.

NOTE:
• All the music files in the same folder as the photo will be
played repeatedly.
• To stop music file playback, select Off in Background
Music.

To zoom in/out photos (USB and Network
Player Photo):
During the Single View mode or Slide Show mode, the
zoom function can be used.
RED button (Zoom in)
x1 S x2 S x4 S x8 zoom in
GREEN button (Zoom out)
x8 S x4 S x2 S x1 zoom out

BbC c buttons: Vertical or Horizontal scrolling
NOTE: Using the zoom function while in the Slide Show
mode will stop the slideshow and zoom in/out the photo.

CONTROLS AND FEATURES

Viewing movie files (on a media
server or USB device)

While in the Single View mode or Slide Show mode, you
can select a different photo from the Play List.

a
b
c

Press QUICK to open the Quick Menu from
Single View mode or Slide Show mode.

You can select movies from a Videos List of available
files.

Videos List (USB and Network Player Movie)
Videos

Press B / b to select Play List and press OK.
The Photos List will appear.

Music

Photos

Devices: /usb/sdb
/12334567891123456789212345678931...
VTS_01_1.mpg
/usb/sdb

Sort: File Name
Date
16:40, Wed, 09 Jan 2013

Press B / b to select a file name.
00:00:33

To close the Photo Viewer:

00:01:59

VTS_01_1.mpg
16:40, Wed, 09 Jan 2013

Press EXIT. The television will return to the last
viewed channel or external input.

File Compatibility
See page 94.

Press BbC c to select a file or folder.
or
buttons can be used to page up/down the Videos
List when there are more files than will fit onto one
screen.
NOTE: The page down function on the last page
and page up function on the first page are not
available.

b
c

When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
With the desired file selected, press OK or c
(play) to start playback.
NOTE:
• On preview screen, if you highlight the file
without pressing OK, the content is played on a
preview screen. When OK is pressed, it is played
in full screen mode.
• Depending on the file size, it may take some time
to start playback.

Press v to stop playback.

NOTE:
• If playback finishes before v is pressed, the screen will
return to the Videos List.
• Depending on the file size, it may take some time for
playback to begin.

English

To select a photo from Play List (USB and
Network Player Photo):

English

CONTROLS AND FEATURES

During playback:

Resume Play (USB only)

• Press W to pause.
PAUSE may not be available depending on the contents
or media server.
• To resume normal playback, press c (play).
• To play in fast reverse or fast forward directions, press
CC / cc during playback. Each time you press the CC /
cc, the playback speed will change.
• Press Z to playback from the beginning of currently
selected file. Press z to locate subsequent files.
• Press
to display the file status information (content
number, movie title, progress time etc.).

You can resume playback from where it was last stopped.

NOTE:
• The information may not be correctly displayed
depending on the contents or the devices.
• During playback, you can adjust the Picture and
Sound menu functions from the Quick Menu.
• The playback speed (CC / cc) may not change
depending on the stream.

Press v while playing the movie to memorize the stopped
position.
NOTE:
• The memorized stopped position will be deleted in any
of the following cases.
- Play different content
- Exit Media Player
- Press v in the Videos List
• This function may not be available depending on the
content.

To select a movie from Play List (USB and
Network Player Movie):
While playing a movie, you can select a different movie
from the Play List.

Press QUICK to open the Quick Menu.

To select subtitle and audio languages (USB
only):

• Press SUBTITLE repeatedly to select your preferred
subtitle language.
• Press s repeatedly to select your preferred audio
language.

Press B / b to select Play List and press OK.
The Movie List will appear.

Press B / b to select a file name.

NOTE: This feature is not available depending on the
contents.

To set the repeat mode:

File Compatibility

See page 94.

Press QUICK to open the Quick Menu.
Press B / b to select Repeat and press c and
B / b to select Off, All or 1.
Mode

Description

Off

The file is played back only once.

All

Files in the same folder are repeatedly
played back.

The same file is repeatedly played back.

To close the Movie Viewer:

Press BACK.

NOTE:
• The setting is effective until the TV is turned off.
• This setting is ignored in the network media renderer.

Press EXIT.

CONTROLS AND FEATURES

To playback DivX Plus HD content:

This TV allows you to play back files purchased or rented
from DivX® Video-On Demand (VOD) services. When you
purchase or rent DivX® VOD files on the internet, you will
be asked to enter a registration code.

• To play in fast reverse or fast forward directions, press
CC / cc during playback. Each time you press the CC /
cc, the playback speed will change.
• This TV generates original chapter point in 10 %
increments for 10 chapters in total, that are accessible
by using the number buttons on the remote control.

In the Media Player Setup menu, press B / b to
select DivX® VOD and press OK.

Press B / b to select DivX® VOD Registration
and press OK.

During playback, press z to skip to the beginning of the
next chapter. When z is pressed twice in succession, it
will repeat two times of above. If z is pressed at the last
chapter, the confirmation message will appear. If you
select Yes, playback will skip to the beginning of the next
content.

< DivX® VOD
DivX® VOD Registration

Press Z to skip to the beginning of the current chapter.
When Z is pressed twice in succession, it will skip to the
beginning of the previous chapter. If Z is pressed twice
in succession at the first chapter, stop playing the current
content and the confirmation message will appear. If you
select Yes, playback will skip to the beginning of the
previous content.

DivX® VOD Deregistration

The DivX® VOD window will appear and you will
see the registration code. For details on
registration, please visit the DivX® website at

Press B to skip to the beginning of the previous file.
Press b to skip to the beginning of the next file.

http://vod.divx.com

Copy the activation file to a memory device and
play it on the TV.

The Number button is used for direct jump. If the 3 button
and OK button is pressed, playback will jump to the
beginning of 3rd chapter.

To deregistration your device:

a
b
c

NOTE:
• Depending on the content data will not be operated.
• The playback speed (CC / cc) may not change
depending on the stream.

In step 2 above, select DivX® VOD
Deregistration, and then press OK.
A confirmation message will appear. Select Yes
and press OK.

Using Multi Title and Alternative Timelines
Multi Title
DivX Plus HD files may contain up to 100 titles.

The DivX® VOD window will appear and you will
see the deregistration code. For details on
registration, please visit the DivX® website at

You can change the title (It contains same video file) by
pressing the RED button.
When the RED button is pressed, it will display the title
change window at the bottom on the screen (same as
Subtitle or Audio change window).

http://vod.divx.com
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software
tools to convert your files into DivX videos.

The title is changed cyclically each time the RED button is
pressed. Playback will start from start time of selected title
every B / b.
Pressing C / c also changes the multi title.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
information on how to complete your registration.

NOTE: Depending on the content data will not be
operated.

DivX Certified® to play DivX® and DivX Plus® HD (H.264/
MKV) video up to HD 1080p, including premium content.

English

To register your TV to a DivX® account:

English

CONTROLS AND FEATURES

Playing music files (on a media
server or USB device)
You can listen to music from a Music List of available
files.

Music List (USB and Network Player Music)
Videos

Music

Devices: /usb/sda1

Photos

To set the repeat mode:

Press QUICK to open the Quick Menu.

Press B / b to select Repeat.

Press c and B / b to select Off, All or 1.

Mode

xxxxxxxxxxx

Off

Files in the same folder are played back
once.

All

Files in the same folder are repeatedly
played back.

The same file is repeatedly played back.

08:22, Web, 31 Oct 2012

xxxxxxxxxxx

13:00, Mon, 23 Jan 2012

xxxxxxxxxxx

14:24, Tue, 01 Mar 2011

d
a

Press BbC c to select a file or folder.
or
buttons can be used to page up/down the Music
List when there are more files than will fit onto one
screen.
NOTE: The page down function on the last page
and page up function on the first page are not
available.

b
c

When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
With the desired file selected, press OK or c
(play) to start playback.
NOTE: If you highlight the file without pressing OK,
the content is played on a Music List. When OK is
pressed, it is played in full screen mode.

Description

Sort: File Name
Date

Press v to stop playback.

NOTE:
• Depending on the file size, it may take some time for
playback to begin.
• During playback, you can adjust the Sound menu
functions from the Quick Menu.

During playback
• Press W to pause.
PAUSE may not be available depending on the contents
or media server.
• To resume normal playback, press c (play).
• To play in fast reverse or fast forward directions, press
CC / cc. Each time you press CC / cc, the playback
speed will change.
• Press Z to playback from the beginning of currently
selected file. Press z to locate subsequent files.

Press BACK.

NOTE:
• The setting is effective until the TV is turned off.
• When the TV is used as a media renderer, this feature
cannot be used.

To select a music file from Play List (USB and
Network Player Music):
While playing a music file, you can select a
different music file from the Play List.

Press QUICK to open the Quick Menu.

Press B / b to select Play List and press OK.
The Music List will appear.

Press B / b to select a file name.

To display the file status information:

a
b

Press
during playback. The information will
be displayed on the bottom of the screen.
Press

again to remove the information.

NOTE: The information may not be correctly displayed
depending on the contents or the devices.

To close the Music Player:

Press EXIT.

File Compatibility
See page 94.

CONTROLS AND FEATURES

Netflix®
To confirm the Netflix ESN (Electronic Serial
Number)

Panel Lock

Panel Lock disables the buttons on the television. All
buttons on the remote control can still be used.

and B / b to highlight Options icon.

Press

Press c and B / b to select Panel Lock and
press OK.

Press B / b to select On.

b
c

In the Network menu, press B / b to select Smart
Apps Setup and press OK.
In Smart Apps Setup menu, select Netflix Setup
and press OK.
Press B / b to select ESN and press OK. Netflix
ESN screen will appear.

To deactivate your TV

< Options
Recording Setup

Media Player Setup
MHL Setup

In the Network menu, press B / b to select Smart
Apps Setup and press OK.

HDMI CEC Control Setup
Hybrid TV Standard
Teletext

Disabled

Auto

Panel Lock

Off

AV Connection

In Smart Apps Setup menu, select Netflix Setup
and press OK.

Off

Power Management
Blue Screen

Off

HDMI Information Display

Press B / b to select Deactivation and press OK.

Press C / c to select Yes and press OK.

When Panel Lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby
button is pressed, the television will switch off and
can only be brought out of standby by using the
remote control.

Blue Screen
When Blue Screen is selected, the screen will turn blue
and the sound will be muted on analogue channels and
external input modes when no signal is received.
NOTE: Some external input sounds may not be muted.

In the Options menu, press B / b to select Blue
Screen.

Press c and B / b to select On or Off.

English

Other features

English

CONTROLS AND FEATURES

The timers

Programme Timers – digital only

Power On Time (only for DTV Clock On mode):
Set the time you prefer with the number buttons.
Repeat (only for DTV Clock On mode): Select the
desired On Timer operation (Once, Every Day,
Mon-Fri, Mon-Sat, Sat-Sun).
Input: Select a video input source (ATV, DTV Ant,
EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4
or PC).
Channel: Set the channel that will be tuned when
the television turns on.

This feature will set the television to go to a specific
channel at a certain time. It can be used to view a
particular programme, or by setting the mode to daily or
weekly, can be used to view a series of programmes.

Press GUIDE and then press the BLUE button on
the remote control

Press b if necessary to select an open timer
position, then press OK. The Edit Timer menu will
now appear on screen.

Press B / b to go through the list adding the
details of the programme by using the number
buttons and C / c to make selections.
Edit Timer

NOTE: When an external input is selected in the
Input field, a channel cannot be selected.
Volume: Set the volume that will be applied when
the television turns on.
Time until Power On (only for DTV Clock Off
mode): Set the amount of time from now until the
TV turns on using the number buttons (maximum
of 12 hours).

5:51 Tue, 22 Apr

The Daily Politics
2 CABC Channel
11:48 - 11:54 Tue, 22 Apr
Timer Type

Reminder

Recording
Reminder

Set Timer

To cancel the On Timer:
When all of the details have been entered,
highlight Set Timer and press OK to save the
timer.

a
b
c

The feature allows you to set the television to turn on
automatically to a preset channel at a certain time of day
or after a certain length of time.

Press

and B / b to highlight Timers icon.

a
b

Press B / b to select Enable On Timer and press
C / c to select On.

Enable DTV Clock

Off

Power On Time

00:00

Repeat

Once

Input

DTV

Channel

2 CABC Channel

Volume

Time until Power On

Press C / c to select Off.
Press B / b to highlight Done and press OK.

Sleep Timer

Press c and B / b to select On Timer and press
OK.

Enable On Timer

In the On Timer menu, select Enable On Timer.

The television can be set to turn itself Off after a certain
length of time.

On Timer

d
e

00:10

Done

Press B / b to highlight Done and press OK.

Delete Timer

On Timer

a
b

Press B / b to go through the list adding the
details of the On Timer by using the number
buttons and C / c to make selections.

Press b to select Enable DTV Clock, and then
press C / c to select On or Off.

Press

and B / b to highlight Timers icon.

Press c and B / b to highlight Sleep Timer and
press OK.
Use the number buttons to set the desired time.
For example, to switch the television off in one and
a half hours enter 01:30, or press c / C to
increase/decrease in steps of 10 minutes.
(Maximum time setting is 12 hours)
Press EXIT to finish.
To cancel the Sleep Timer, enter all zeros for the
above setting.

CONTROLS AND FEATURES

Digital on-screen information
When viewing in digital mode, the on-screen
information and programme guide provide
access to programme details for all available
channels.

Automatic Power Down
The TV will automatically turn itself off (Standby) after 4
hours, if you do not operate the TV either from the remote
control or the TV control panel.

Press

Information

and B / b to highlight Options icon.

Press c and B / b to select Power Management
and press OK.

Press B / b to select Automatic Power Down.

Press c and B / b to select On or Off and press
OK.

Now

MLB Young’s two-run triple leads AL over NL

AD 18

HD 16:9

News

World News and Sports

Also

MLB Young’s two-run triple leads AL over NL

6:00- 8:00

15 min left
8:00- 9:00

Change

Press B / b to select the “Now”, “Next” or “Also”
information guide.
The selected information content will appear.

To record the next scheduled programme, select
Next and press OK. The Edit Timer screen will
appear.
Edit Timer

10:50 Tue, 26 Apr

The Daily Politics
2 CABC Channel

In the Power Management menu, press B / b to
select No Signal Power Down.
Press c and B / b to select the item you want to
change and press c and B / b to select On or
Off.

English

D+

• Low signal strength of analogue channel (no signal
detection)
• Only Audio L/R is connected to external input to listen to
music through the TV speakers.

6:00 Thu, 11 Oct

3D 2D Side by Side

No Signal Power Down

CHANNEL Z

REC

NOTE:
• This feature is set to On when Location is set to Home.
• 1 minute before switching to Standby, a Warning
message will appear.
• When the following features are set, the feature that is
set for the nearest time will function.
- Automatic Power Down
- Sleep Timer
- Auto shutdown after 1 hour of inactivity (after power on
by On Timer)
- No signal auto power off (after 15 minute of no signal)

The TV will automatically turn itself off after 15 minutes
when no signal is detected. You can change the setting to
Off for the following purposes:

Press
, the information screen will appear
giving details of the channel and programme
currently being viewed.
Display Example

11:30 - 12:30 Tue, 26 Apr
Timer Type

Set Timer

NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before turning
off.

Recording

Delete Timer

The details of the programme will already have
been added to the timer. Highlight Set Timer and
press OK to save.
To indicate that a Recording Timer has been set, a
clock icon will be displayed in the Next fields of the
information screen. A check mark will appear if the
timer is a Reminder Timer.

English

Energy Saving Settings

English

CONTROLS AND FEATURES

To display More Information:

a
b

Press QUICK to open the Quick Menu.

Using EPG (Electronic
Programme Guide)

Press b to highlight More Information and press
OK.

On-screen Information icons
Icon

Using Broadcast Guide

Description

Service info

Service type
(TV, Radio, Text)

Audio info

Mono

Skip

Tue 22
TV

Stereo
Dual mono

World Business Today

2 ABC1

Seven Wonders of Anclent Rome

3 ABC2

ITV Morning News

7:30

Big Brotherʼs Little Brother

45 Battlefield Detectives

ITV Morning...
Hope & Faith

BBC News 24

7 BBC TWO

Kickstart Natural Born Dealers

Zoo Story

8 BBC THREE

World News Today

When HE-AAC is
decoded

9 BBC NEWS 24

Big Brother Live

10 BBCi

vets in Hong Kong

11 CBBC Channel

Worldʼs Toughest

Audio Description

12 TF1 HD

Zoo Story

13 FRANCE 2 HD

Good Morning Sports Fan

Dolby Digital+

For Hard of Hearing
●REC

3D info

3D
3D → 2D

Event info

HD, SD

Video format (HD,
SD)

16:9, 4:3

Video Aspect

More Info

Teletext

Audio track
(Mono, Multi)
Parental rating
Encrypted
Recording
Reminder

Hope & Faith

Go, Diego, Go!

Seven Wonders of Anclent Rome
Hope & Faith
BBC News 24
Animal Cops...

vets in Hong Kong

Go, Diego, Go!

World News Today

Hope & Faith

vets in Hong Kong

45 vets in Hong Kong epsode 12
Worldʼs Toughest
Firnbles

Now

Worldʼs Toughest

Zoo Story

Animal Cops Houston
View

Genre

Timers

Watch TV

You can switch the time scale to 1.5 or 3 hours by
pressing the GREEN button.

Recording + Service
info

Subtitle (Single,
Multi)

Page Up/Down

8:00
World Business...

ITV Morning News
Balairiory

Seven Wonders of Anclent Rome

Recording info

Timer info

1 ABC HDTV

7:00

6 BBC ONE

D+

0, 4 – 18

6:30

5 ABC3

Dolby Digital

Audio/Subtitle
info

5:48 Tue, 22 Apr
6:00

4 ABC1

Multichannel
D

Select the on-screen Guide by pressing GUIDE,
and the Guide screen will appear highlighting
details of the channel and programme currently
being viewed. This may take a few moments to
appear.

d
e
f

Press C / c for information on other programmes
scheduled for the channel selected. To highlight
the first programme in the genre grid, press the
RED button.
For details of other programmes currently
available, press B / b to scroll up and down the
channel list. As channels are selected, details of
the programme currently being broadcast will
appear. Press C / c to view information for future
programmes.
For information on a highlighted programme, press
.
To set the timer for that programme, press the
BLUE button to bring up the Programme Timers
menu.
Press

to view another page.

Updating EPG:

In the Guide screen press QUICK.

Press B / b to select EPG Update.

CONTROLS AND FEATURES

From the Guide screen, you can use the genre selection
and search features.

a
b

In the Guide screen, press QUICK.
Press B / b to highlight Genre Colour in the
Quick Menu and press OK.

Digital settings – parental
control
In order to prevent viewing of unsuitable films
and programmes, channels and menus can be
locked in digital mode. These can then only be
accessed with a security code PIN.

Genre Colour

Parental PIN Setup
Movie

a
Colour Setup

With the focus on a particular genre, press the
desired coloured button to assign. Four colours will
be available to set. Press BACK to go back to the
Guide screen.

Press
icon.

and B / b to highlight Installation

Press c and B / b to select DTV Settings and
press OK.

Press B / b to select Parental PIN Setup and
press OK.
< DTV Settings
Channels
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting
Standby Channel Update

Off

Dynamic Scan

Off

Favourite Region
Common Interface

Using the number buttons enter a four digit
number. Once entered you will be prompted to
confirm by entering again.
Parental PIN Setup
New PIN:
Confirm PIN:

The PIN number is now set.
If the PIN code has been set, when Auto Tuning
and Reset TV are executed, entering the PIN will
be necessary. “0000” is not acceptable.

English

Genre selection/searching

English

CONTROLS AND FEATURES

Parental Setup
The Parental Control feature allows you to block
programmes according to their rating levels. If a PIN has
been set, you will need to enter it before adjusting the
level.

In the DTV Settings menu, press B / b to select
Parental Control and press OK.

Press B / b to select Parental Setup or Playback
Setup and press OK.
Parental Setup: Select when you want to set
viewing restrictions on broadcast programmes.

Digital settings – Channel
Options
Selecting favourite channels
From the Quick Menu / Channel Options menu, it is
possible to create a list of the digital channels that are
watched most. Press LIST / C c to select the Favourite
Channel list.

a
b

Select the channel you want to add to your
favourite list.
Press QUICK to open the Quick Menu.

Playback Setup: Select when you want to set
viewing restrictions on playback of programmes
recorded to the USB HDD.

Press b to select Channel Options and press
OK.

Press B / b to select an option.

Press c to highlight the favourite (✩) box.

< Parental Control
Parental Setup
Playback Setup

None
Enabled

None

Press OK to select the ones required. A tick will
appear in the box as they are selected.

5
6
7
8
9

f
g

10
11

Repeat steps 1 through 5 for other channels.
When all favourites have been selected, press
EXIT.

12
13

Favourite Channel List

To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.

Press LIST to display Channel List.
Each time you press C / c, All Channels, TV
Channels, Radio Channels, Text Channels or
Favourites is selected in order.

Press C / c to select Favourites. The number of
favourites available depends on how many lists
have been created.
Channel List
Favourite
6

NT1

PARIS PREMIERE

AB1

ITV1

Press B / b to highlight a channel and press OK
to watch.

CONTROLS AND FEATURES

This feature allows you to set channels that will be skipped
when Pu or PU are used to tune.

Subtitles

Select the channel you want to skip in your
channel list.

In DTV mode, this feature will show subtitles on the screen
in the selected language provided they are being
broadcast.

In the Quick Menu, press b to select Channel
Options and press OK.

In the DTV Settings menu, press B / b to select
Subtitle and Audio and press OK.

Press c repeatedly to highlight the skip (8) box.

Press OK to select. A tick will appear in the box.

Press b to select Subtitle Display and press c
and B / b to select On or Off.

Repeat steps 1 through 4 for other channels.

< Subtitle and Audio
Subtitle Display

Press EXIT.
NOTE: Skipped channels cannot be selected by
Pu or PU but still be accessed by direct number
entry (when tuned a 8 icon will be displayed in
the banner to indicate as a skipped channel).

Locking channels
Locking Channels stops the viewing of digital channels,
and they can only be accessed by entering the PIN.

Select the channel you want to lock in your
channel list.

In the Quick Menu, press b to select Channel
Options and press OK.

Press c repeatedly to highlight the lock (

) box.

Press OK and PIN entry will be required to set the
locked channels. Enter PIN Code and a tick will
appear in the box.
NOTE: A Parental PIN should be set in advance. If
not, a warning message will display to reminder
you to set a PIN first.

Off

Subtitle Type

Normal

Primary Subtitle Language

English

Secondary Subtitle Language

English

Audio Type

Normal

Primary Audio Language

English

Secondary Audio Language

English

Press B / b to select Primary Subtitle Language
or Secondary Subtitle Language and press c
and B / b to select an option.

The SUBTITLE button can be used to select subtitle on or
off for the current channel only and to select the subtitle
language if more than one subtitle is available.

Audio languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided multiple
language tracks are being broadcast.

In the Subtitle and Audio menu, press B / b to
select Audio Type and press c and B / b to
select Normal, For Hard of Hearing or Audio
Description and press OK.

Repeat steps 1 through 4 for other channels.

Press B / b to select Primary Audio Language
or Secondary Audio Language and press c and
B / b to select an option.

Press EXIT.

If more than one soundtrack is available, use the
s button to select between them.

From this point on, when any of the Locked
Channel list is selected, the PIN must be entered
before they can be accessed.

English

Digital settings – other settings

Skip channels

English

CONTROLS AND FEATURES

Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
provider.

Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
Press
icon.

Software Upgrade and
Licences
Searching for New Software
If preferred, software upgrades can be searched for
manually using Search for New Software.

In the Get Help menu, press B / b to select
Software Upgrade and press OK.

Press B / b to select Over-the-air Upgrade and
press OK.

Press c and B / b to select Search for New
Software and press OK. The television will
automatically start searching for a software
upgrade, the progress bar will move along the line.

and B / b to highlight Installation

Press c and B / b to select DTV Settings and
press OK.

Press B / b to select Common Interface and
press OK.

SEARCH FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
48 %...

CH 31

Details of the CAM should now be available.

NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
• Some CI or CI+ CAM may not be supported.
• CI+ operation is not guaranteed except for Canal Ready
DTT services on suffix FC models.

If an upgrade is found, the television will
automatically start downloading. If not, a screen
will appear stating that an upgrade is unavailable.
NOTE: When Auto Upgrade is set to Off, this feature is
not available.

Network Upgrade
TOSHIBA may offer upgrades for the TV’s software in the
future. The TV’s software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not
be able to watch the TV.

In the Get Help menu, press B / b to select
Software Upgrade and press OK.

Press B / b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.

The TV software upgrade will start when download
succeeds.

CONTROLS AND FEATURES

The licences for the software used in this television are
available for viewing.

System Information and Reset
TV

In the Get Help menu, press B / b to select
Software Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.

System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc.

a
b

In the Get Help menu, press B / b to select
System Information.
Press OK to display the System Information.
System Information
TOSHIBA
2013
Jan 19 2013
Software Version : xxxxxxxx
MBOOT Version : xxxxxxxx
AVERAGE
CH 25

WEAK

STRONG

GOOD

AVERAGE
CH 33

WEAK

STRONG

GOOD

AVERAGE
CH 67

c
d

WEAK

STRONG

GOOD

For information about the signal quality of a
particular multiplex, press B / b to select that
multiplex.
Press OK for a screen showing detailed technical
information about the selected multiplex.

Reset TV
Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.

a
b

In the Installation menu, press B / b to select
Reset TV.
Press OK to select. A screen will appear warning
that all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup
and perform an auto tune. (See “Quick Setup”
section on page 15.)

English

Software Licences

English

CONTROLS AND FEATURES

PC Settings

Sampling Clock

Horizontal and Vertical Position
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.

a
b
c

and B / b to highlight Picture icon.

Press

In the Display Settings menu, press B / b to
select PC Settings and press OK.

Press B / b to select Sampling Clock.

Press C / c to adjust until the picture clears.

Press c and B / b to select Display Settings and
press OK.

Reset
Use Reset to return all items to the original factory
settings.

Press B / b to select PC Setting and press OK.
< Display Settings
Auto Format

4:3 Stretch

Off

Picture Position
PC Settings

Adjusting the Sampling Clock alters the number of pulses
per scan, this will clear vertical lines on the screen.

Press B / b to select an option and press C / c to
adjust the settings.
< PC Settings
Horizontal Position

Vertical Position

Clock Phase

Sampling Clock

In the Display Settings menu, press B / b to
select PC Settings and press OK.

Press B / b to select Reset and press OK.

NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.

Reset

Clock Phase
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.

In the Display Settings menu, press B / b to
select PC Settings and press OK.

Press B / b to select Clock Phase.

Press C / c to adjust until the picture clears and
press OK.

CONTROLS AND FEATURES

See page 8 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through
the SCART lead to switch the television to the correct
Input socket.

Labelling video input sources
These input labels are shown in the input selector. You
can label video inputs according to the devices you have
connected to the TV.

a
b

Alternatively, press the external source selection button
o until the picture from connected equipment is shown.

and B / b to highlight Options icon.

Press

Press B / b to select AV Connection and press
OK.
< Options
Recording Setup
Media Player Setup

Input selection

MHL Setup
HDMI CEC Control Setup

Use the Input Selection window if the television does not
switch over automatically.

Hybrid TV Standard
Teletext

Auto

Panel Lock

By pressing o on the remote control or TV, a list
will appear on screen showing all inputs and
external equipment.

Disabled
Off

AV Connection
Power Management
Blue Screen

Off

HDMI Information Display

Press o on the remote control
Inputs

Press b to highlight Input Labelling and press
OK.

1
2
< AV Connection

HDMI 1
HDMI 2

Input Labelling

HDMI 3

Colour System

HDMI 4
PC

Press and hold p / o on the TV
Inputs
DTV Ant TV
1
2
HDMI 1
HDMI 2

HDMI 3
HDMI 4
PC

Press B / b to select the item you want to label,
and then press C / c to select --, Amplifier,
Cable, DVD, Game, PC, Recorder Satellite, VCR
or Bluray.

ATV
Input Labelling

HDMI® displays equipment connected to Input
HDMI on the back or side of the television.

Input

Label

EXT 1

EXT 2

PC displays a computer connected to Input RGB/
PC on the back of the television.

HDMI 2

DVD

HDMI 3

HDMI 1

HDMI 4

Repeat step 4 for other video inputs.

English

Input selection and AV
connections

English

CONTROLS AND FEATURES

Digital Audio Output
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format [S/
PDIF]), the following options can be selected or adjusted.

In the Sound menu, press B / b to select Digital
Audio Output and press OK.
< Sound
Balance

Bass

Treble

Audyssey Premium Television
Dynamic Range Control
Dual

On
Dual 1

Audio Level Offset
TV Speakers

Headphone Level
Audio Description
Digital Audio Output

Press B / b to select an option.
Audio Format
Press C / c to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if
available) or PCM to the digital audio output
socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital
Audio Delay
Press C / c to select Auto or Manual.
Auto:

This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large
between the image and sound depending
on the connected equipment (amplifier
etc.). In that case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.

Delay Adjustment
Press C / c to adjust the audio signal timing
(0 – 250 ms) to meet the video signal timing.

NOTE:
• This feature is greyed out when Audio Delay is
in Auto.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
• When the optical digital output setting
(AutotPCM) is changed, it may be necessary
to adjust the timing again.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)

CONTROLS AND FEATURES

Amplifier Control

This is a new feature that uses CEC technology
and allows you to control Toshiba HDMI CEC
Control compatible devices from the television
remote control via HDMI connection (page 10).
When the Enable HDMI CEC Control item in the HDMI
CEC Control Setup menu is set to On, individual
functions also set to On will be activated.

When Amplifier Control is set to on/off the connected
HDMI CEC Control amplifier.

In the HDMI CEC Control Setup menu, press b
to select Amplifier Control.

Press c and B / b to select On or Off.

Initial Speaker Setting

Enable HDMI CEC Control

and B / b to highlight Options icon.

Press

Press c and B / b to select HDMI CEC Control
Setup and pres OK.

Press b to select Enable HDMI CEC Control and
press C / c to select On.

The Initial Speaker Setting allows to select TV speakers or
Amplifier speakers.

In the HDMI CEC Control Setup menu, press b
to select Initial Speaker Setting.

Press c and B / b to select TV Speakers or
Amplifier.

HDMI CEC Control input source
selection

< HDMI CEC Control Setup
Enable HDMI CEC Control

TV Auto Power

Off

Auto Standby

Amplifier Control

Initial Speaker Setting

TV Speakers

NOTE: If you set Enable HDMI CEC Control to
Off, all other items will be greyed out.

TV Auto Power

If an HDMI CEC Control device with HDMI switching
capability (e.g. AV amplifier) is connected to the HDMI
input, you can select another HDMI CEC Control device
that is connected to the master HDMI device on the input
source list.

Press o and a list will appear on screen showing
available input sources.

Press b to select the input source that the HDMI
CEC Control devices are connected.

Press c and a second selection screen will appear
showing all connected HDMI CEC Control
equipment.

The TV Auto Power setting allows the television to be
automatically switched on if an HDMI CEC Control device
is turned on.

English

Using HDMI CEC Control

Inputs
TV

In the HDMI CEC Control Setup menu, press b
to highlight TV Auto Power.

1
2
HDMI 1

HDMI 2

Press c and B / b to select On or Off.

Auto Standby
When Auto Standby is enabled, the television, when
switched off, will automatically switch off (Standby) all
connected HDMI CEC Control equipment.

In the HDMI CEC Control Setup menu, press b
to highlight Auto Standby.

Press c and B / b to select On or Off.

HDMI 3

HDMI 4

VCR/DVR

CBL/SAT

GAME/TV

AUX

DVD

Press B / b to select the desired input source,
and then press OK.

English

CONTROLS AND FEATURES

NOTE:
• These functions depend on the device connected.
If you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.
• If the HDMI cable from connected equipment is
changed, Enable in the HDMI CEC Control Setup menu
may need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable HDMI
CEC Control item on the HDMI CEC Control Setup
menu from Off to On.

Using MHL TV function
You can use the following functions by connecting
between the TV HDMI 3 port and a USB port of mobile
phones etc. with an MHL cable.
• Charge with mobile phone from TV
• Two-way remote operation between TV and mobile
phone
• Video/Audio output from mobile phone
NOTE: These functions may not be available depending
on the connected device.

HDMI CEC Control one touch play
When connected equipment is switched on, HDMI CEC
Control will automatically detect the television through the
input selection. If the television is in Standby, it will be
switched on automatically.

Connecting an MHL-compatible
device
Connect the device to the HDMI 3 port on the TV with an
MHL cable (not supplied).

These functions can be enabled or disabled from the
HDMI CEC Control Setup (see page 85).
NOTE:
• Even if the equipment is showing a menu, the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.

HDMI CEC Control system standby
If the television is turned off (Standby), the television will
send a message to turn off (Standby) all of the HDMI CEC
Control devices connected to the television.

HDMI 3

MHL cable
(not supplied)
• When you connect an MHL-compatible device to the
HDMI 3 port on the TV with the MHL cable, charging
starts automatically.
NOTE: Do not connect an MHL-compatible device to any
port other than the HDMI 3 port.

These functions can be enabled or disabled from the
HDMI CEC Control Setup (see page 85).

Operating an MHL-compatible
device

NOTE: This feature depends on the connected equipment
and television state.

When an MHL-compatible device is connected to the
HDMI 3 port on the TV, input automatically switches to the
HDMI 3 port.
Operate the device using the remote control for the TV. To
display photos, select the photos using BbC c and
press OK. To play a video, press c (play).
Depending on the connected MHL-compatible device, it
may be possible to perform operations from the device.

MHL Setup
Select whether or not input automatically switches to the
HDMI 3 port when an MHL-compatible device is
connected.

In the Options menu, press B / b to select MHL
Setup.

Press c to select TV Auto Input Switch.

Press C / c to select On or Off and press OK.

TEXT SERVICES

Navigating pages using Auto
If Fastext is available, four coloured titles will appear at
the base of the screen.

This television has a multi-page text memory,
which takes a few moments to load. It offers two
Modes of viewing text – Auto will display
Fastext, if available. List will save your four
favourite pages.

To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast text index page or consult your local
Toshiba dealer.

Selecting modes
Navigating pages using LIST

The text character set will be automatically chosen by the
language setting in the Options menu.

a
b

and B / b to highlight Options icon.

Press

Press c and B / b to select Teletext, and then
press C / c to select Auto or List.

To change these saved pages, press the relevant
coloured button and enter the 3-digit number. This number
will change in the top left of the screen and in the coloured
highlight.

< Options
Recording Setup
Media Player Setup

Press OK to save. Whenever OK is pressed, all four
page numbers showing at the bottom will be saved
and the previous ones will be lost.

MHL Setup
HDMI CEC Control Setup
Hybrid TV Standard
Teletext

Disabled
Auto

Panel Lock

Off

Auto

NOTE: The video signal from the external inputs (EXT-1
and EXT-2) is not saved.

List

AV Connection
Power Management
Blue Screen

Off

HDMI Information Display

The four coloured choices at the bottom of the screen are
numbers – 100, 101, 102 and 103, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.

If OK is not pressed, the selection will be forgotten when
the channel is changed.
Other pages may be viewed by entering the 3-digit page
number – but DO NOT press OK or these pages will be
saved.

Text information
The TEXT button
To view text services press TEXT. Press again to
superimpose the text over a normal broadcast picture and
again to return to normal viewing. Channels cannot be
changed until text is cancelled.
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3-digit
page number using the numbered buttons, pressing the
coloured buttons or pressing PU to advance to the next
page and Pu to go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as subpages are received.
If you open a page containing sub-pages, the sub-pages
are automatically displayed in sequence. To quit
automatic sub-page change, press C / c.
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating
that these pages have been loaded.
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.

English

Text services

English

TEXT SERVICES

Control buttons
Below is a guide to the functions of the remote control text
buttons.

k To display the index/initial page:
Press k to access the index/initial page. The one
displayed is dependant on the broadcaster.

TEXT To display a page of text:
Press TEXT to display text. Press again to superimpose
text over a normal picture. Press again to return to normal
television viewing. Channels cannot be changed until this
has been done.

A To reveal concealed text:
To discover the solutions on quiz and joke pages press the
A button.

B To hold a wanted page:
At times it is convenient to hold a page of text. Press B
and B will appear in the top left of the screen. The page
will be held on screen until the button is pressed again.

C To enlarge the text display size:
Press C once to enlarge the top half of the page, press
again to enlarge the bottom half of the page. Press again
to revert to normal size.

D To temporarily erase the text screen:
Press D once to erase the text screen temporarily.
To recall the text screen, press the button again.
To display news flashes:
Select the news flash page for the chosen text service
(see the index page of text service). The news flashes will
be displayed as and when they are broadcast.

Remember to cancel text before
changing channels - press the TEXT
button twice.

PROBLEM SOLVING

English

Questions and Answers
Below are the answers to some of the most common queries.
Question

Sound

Why is there no sound or picture?

Answer
Check the television is not in Standby mode. Check the mains plug and
all mains connections.

Why is there a picture but no sound? Check all lead connections.
No sound or unacceptable format sound may be received.
Check the volume has not been turned down or that sound mute has
not been selected.
Check shared audio settings.
Why is the soundtrack in English
The programme is currently being broadcast with an English
when a different audio language has soundtrack only.
been selected?
Why is there incorrect or no sound
when in DTV mode?

Press s to ensure the hard of hearing option has not been selected.

There is a picture, but why is there
little or no colour?

When using an external source, for instance, a poor quality video tape,
if there is little or no colour, improvements may sometimes be achieved.
The colour is factory set to Auto to automatically display the best colour
system.
To check that you have the best colour:

With the external source playing, select Colour System from
the Options menu.
< AV Connection
Input Labelling
Colour System

Picture

Auto
PAL
SECAM
NTSC 4.43
NTSC 3.58

With C / c choose between Auto, PAL, SECAM, NTSC 4.43 or
NTSC 3.58.

What else can cause a poor picture? Interference or a weak signal. Try a different television station. Manual
Fine Tuning may help.

a
b

Select the ATV Manual Tuning menu. Highlight the station and
press OK. Then press c to select Manual Fine Tuning.
Using B / b adjust to get the best picture and sound. Press OK
and then press EXIT.
ATV Manual Tuning
Manual Fine Tuning

Why doesn’t the video/DVD being
played show on screen?

Make sure the media recorder or DVD player is connected to the
television as shown on page 8, and then select the correct input by
pressing o.

Why are there vertical stripes on the
screen when in PC mode?

The Sampling Clock may need adjustment. Select PC Settings from
the Display Settings menu, highlight Sampling Clock and adjust until
the lines clear.

English

PROBLEM SOLVING

Question

Answer

Picture

Why are there horizontal stripes and/ The Clock Phase may need adjustment. Select PC Settings from the
or blurred images on the screen when Display Settings menu, highlight Clock Phase and adjust until the
in PC mode?
picture clears.
Why are the colours wrong when an
NTSC source is played?

Connect the source via a SCART lead and play.
Select Colour System from the Options menu.

Set the Colour to Auto and exit.

Go to the Picture menu and adjust the tint.

Why don’t the controls of the
television work?

Check that Panel Lock is not On.

Why doesn’t the remote control
work?

Check that batteries aren't exhausted or inserted incorrectly.

Why is the digital channel locked?

The channel has been locked in Channel Options (see ’Digital settings
– Channel Options’ section).

Why are some of the digital
subscription channels unavailable?

Your subscription needs upgrading. Contact your service provider.

What is DVB-T?

Digital Video Broadcast via an aerial/antenna.

What is DVB-C?

Digital Video Broadcast via a cable connection.

How are DTV radio channels
selected?

Select from All Channel List (LIST button).

What can be done if the PIN number
has been forgotten?

Use the Master PIN code of 1276, then change to a number of your
choice. Select Parental PIN Setup from the DTV Settings menu to
enter PIN. Ensure that no-one else can use the Master PIN by removing
the Owner’s Manual.

General

Why when digital subtitles have been Subtitles are not currently being transmitted by the broadcaster.
selected are they not showing on
screen?
Why are there problems with
analogue text?

Good performance of text depends on a good strong broadcast signal.
This normally requires a roof or loft aerial. If the text is unreadable or
garbled, check the aerial. Go to the main index page of the text service
and look for the User Guide. This will explain the basic operation of text
in some detail. If further information is needed on how to use text see
the text section.

Why is a page number visible at the
top of the screen but no text?

Text has been selected but Teletext information is currently unavailable
on the current source.

Why don’t the devices connected via Make sure to use cables with the HDMI logo
(see page 9).
HDMI operate properly?
Some early HDMI equipment may not work properly with the latest
HDMI TV products, due to new standard adoption.
Why don’t the devices connected via Turn off your TV and unplug the power cord, and then plug and turn on
MHL operate properly?
again.
Turn the MHL Source Power Off and On again.
Try to reconnect a MHL cable.
Why don’t the HDMI CEC Control
devices work?

When the connected HDMI CEC Control device does not work correctly
after you have changed the settings of the device, turn off your
television and unplug the power cord, and then plug and turn on again.
Unplug the HDMI cable of the HDMI CEC Control device and lead
again.

Why is the HDMI CEC logo still
showing when the equipment has
been disconnected?

If the HDMI CEC Control device is disconnected, the logo will disappear
after approximately one minute.

PROBLEM SOLVING

English

Question

Answer

Why don’t the networked devices
work?

The LAN cables are not connected properly or at all. Connect all cables
(see page 12).
Make sure your network address is set up correctly (see page 47).

Why doesn’t the wireless network
work?

Check that the AP is powered on.

General

Why doesn’t the Media Player feature Make sure that devices are connected correctly.
operate?
Incorrect behaviour may occur with a USB Hub connection.
Check your network setup if using a network media server.
Why are not 3D images displayed?

Ensure that there is no object blocking the infrared signals in the
infrared reception part of television and 3D glasses. If the infrared data
communication between the television and 3D glasses is lost for 5
minutes, the power of 3D glasses is turned off.

Why doesn’t the USB HDD work?

Your country/area may not support the USB HDD function.

Why isn't Skype launched?

Check that the recommended video camera (page 59) is connected to
the TV.
Ensure the network cable connection (page 12).
Check the Network setting of TV.
Turn off the TV and unplug the power cord. After 1 minute, plug the
power cord in and turn on the TV.

Why can't the Skype account be
signed in?

If you have no Skype Name, create a Skype Name in Create an
account.
If you forgot password, visit www.skype.com and confirm the password.

What do the LEDs on the front of the Check the table below.
television indicate?
LED indication

Condition

Green

Power ON

Red

Power OFF
(Standby or Active Standby)

Light sensor
Remote sensor
Power LED
On = Green
Standby = Red

Other problems
If your TV’s problem is not addressed in this Questions and Answers section or the recommended solution has not
worked, do one of the following:
1 Turn off your TV. After 30 seconds, turn it on.
2 Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV.
3 Perform the Reset TV function in the Installation menu.

English

INFORMATION

Information
Before connecting any external equipment, turn off all main power switches. If there is no
switch, remove the mains plug from the wall socket.

Signal information for Mini D-sub 15 pin connector
Pin No.

Signal name

Pin No.

Signal name

Pin No.

Ground

Signal name
NC

Ground

DDC Data
H-sync

Ground

NC*

+5V

V-sync

Ground

DDC Clock

* NC = not connected

Acceptable PC signals through the PC terminal
The PC input on this TV only accepts signal formats which are compliant with VESA-DMT as shown
in the table below. Since some PCs input signals which are different from the resolution and
frequency described in the table below, the following phenomenon may occur; incorrect display,
false format detection, picture position failure, blur, or judder. In this case, set the monitor output
format on your PC to conform to a signal in the table below.
Format

Resolution

V. Frequency

H. Frequency

Pixel Clock Frequency

VGA

640 × 480

59.940 Hz

31.469 kHz

25.175 MHz

72.809 Hz

37.861 kHz

31.500 MHz

75.000 Hz

37.500 kHz

31.500 MHz

56.250 Hz

35.156 kHz

36.000 MHz

60.317 Hz

37.879 kHz

40.000 MHz

72.188 Hz

48.077 kHz

50.000 MHz

75.000 Hz

46.875 kHz

49.500 MHz

60.004 Hz

48.363 kHz

65.000 MHz

70.069 Hz

56.476 kHz

75.000 MHz

75.029 Hz

60.023 kHz

78.750 MHz

59.995 Hz

47.396 kHz

68.250 MHz

59.870 Hz

47.776 kHz

79.500 MHz

74.893 Hz

60.289 kHz

102.250 MHz

1280 × 800

59.810 Hz

49.702 kHz

83.500 MHz

1360 × 768

60.015 Hz

47.712 kHz

85.500 MHz

WXGA+

1440 × 900

59.887 Hz

55.935 kHz

106.500 MHz

SXGA

1280 × 1024

60.020 Hz

63.981 kHz

108.000 MHz

75.025 Hz

79.976 kHz

135.000 MHz

60.000 Hz

67.500 kHz

148.500 MHz

SVGA

XGA

WXGA

1080p

800 × 600

1024 × 768

1280 × 768

1920 × 1080p

VESA Standard
(DMT)

INFORMATION

English

Acceptable video or PC signals through the HDMI terminals
The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which
are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices
input signals which are different from the resolution and frequency described in the table below, the
following phenomenon may occur: incorrect display, false format detection, picture position failure,
blur, or judder.
In this case, set the monitor output format on your PC, HDMI or DVI device to conform to a signal in
the table below.
Resolution

V. Frequency

H. Frequency

Pixel Clock
Frequency

480i

720 × 480i

59.940/60.000 Hz

15.734/15.750 kHz

27.000/27.027 MHz

576i

720 × 576i

50.000 Hz

15.625 kHz

27.000 MHz

480p

720 × 480p

59.940/60.000 Hz

31.469/31.500 kHz

27.000/27.027 MHz

Format

576p

720 × 576p

50.000 Hz

31.250 kHz

27.000 MHz

1080i

1920 × 1080i

59.940/60.000 Hz

33.716/33.750 kHz

74.176/74.250 MHz

1080i

1920 × 1080i

50.000 Hz

28.125 kHz

74.250 MHz

720p

1280 × 720p

59.940/60.000 Hz

44.955/45.000 kHz

74.176/74.250 MHz

720p

1280 × 720p

50.000 Hz

37.500 kHz

74.250 MHz

1080p

1920 × 1080p

59.940/60.000 Hz

67.433/67.500 kHz

148.352/148.500 MHz
148.500 MHz

1080p

1920 × 1080p

50.000 Hz

56.250 kHz

1080p

1920 × 1080p

24.000 Hz

27.000 kHz

74.250 MHz

1080p

1920 × 1080p

29.970/30.000 Hz

33.720/33.750 kHz

74.176/74.250 MHz

1080p

1920 × 1080p

25.000 Hz

28.130 kHz

74.250 MHz

VGA

640 × 480

59.940/60.000 Hz

31.469/31.500 kHz

25.175/25.200 MHz

72.809 Hz

37.861 kHz

31.500 MHz

75.000 Hz

37.500 kHz

31.500 MHz

56.250 Hz

35.156 kHz

36.000 MHz

60.317 Hz

37.879 kHz

40.000 MHz

72.188 Hz

48.077 kHz

50.000 MHz

75.000 Hz

46.875 kHz

49.500 MHz

60.004 Hz

48.363 kHz

65.000 MHz

70.069 Hz

56.476 kHz

75.000 MHz

75.029 Hz

60.023 kHz

78.750 MHz

59.995 Hz

47.396 kHz

68.250 MHz

59.870 Hz

47.776 kHz

79.500 MHz

74.893 Hz

60.289 kHz

102.250 MHz

SVGA

XGA

WXGA

SXGA

800 × 600

1024 × 768

1280 × 768

1360 × 768

60.015 Hz

47.712 kHz

85.500 MHz

1280 × 1024

60.020 Hz

63.981 kHz

108.000 MHz

75.025 Hz

79.976 kHz

135.000 MHz

VESA
Standard

English

INFORMATION

Media Player Supported Format
Media
Player
Photo

Media
Format
JPEG

File
Extension
.jpg
.jpeg

Video codec

Audio codec

JPEG

USB Network
yes

yes

–

MPO

.mpo

MPO

–

BMP

.bmp

BMP

–

Note
USB
Data compatibility:
JPEG Exif ver 2.2
Maximum viewable
resolution:
•JPEG
15360 × 8640 (Baseline)
1024 × 768
(Progressive)
•BMP
9600 × 6400
Maximum number of
files: 1000 / folder
Network
Data compatibility:
JPEG Exif ver 2.2
Maximum viewable
resolution:
4096 × 4096
Maximum number of
files: 1000/folder
NOTE: Some files
may not be played.

Movie

AVI

.avi

MPEG-2
MPEG-4 part2
H.264 (MPEG-4 AVC)
DivX
Xvid

MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
ADPCM
MPEG-2/4 LC-AAC
MPEG-4 HE-AAC

yes

MPEG-2
PS

.mpg
.mpeg

MPEG-1 Video

MPEG-1/2 Layer3

yes

MPEG-2 Video

MPEG-1/2 Layer2
Dolby Digital (AC-3)
L-PCM

yes

MPEG-2
TS

.ts
.trp
.tp

MPEG-2 Video

MPEG-1/2 Layer2

yes

H.264(MPEG-4 AVC)
VC-1(WMV9)

MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
MPEG-4 LC-AAC
MPEG-4 HE-AAC

yes

.vob

MPEG-1 Video
MPEG-2 Video

MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM

yes

MPEG-2
VOB

USB
Maximum number of
files: 1000 / folder
Maximum viewable
resolution:
• Motion-JPEG:640 ×
480
• Other:1920 × 1080
Maximum video size:
Unlimited
Network
Maximum video
resolution:
1920 × 1080
Maximum number of
file:1000 / folder
Maximum video size:
Unlimited
NOTE: Some files
may not be played.

INFORMATION

Movie

Music

Media
Format

File
Extension

Video codec

Audio codec

USB Network

MOV

.mov

H.264 (MPEG-4 AVC)
MPEG-4 part2

MPEG-1/2 Layer3
MPEG-2/4 LC-AAC
MPEG-4 HE-AAC

yes

MP4

.mp4
.m4v

H.264 (MPEG-4 AVC)
MPEG-4 part12,14

MPEG-1/2 Layer3
MPEG-4 HE-AAC

yes

H.264 (MPEG-4 AVC)

MPEG-2/4 LC-AAC

yes

ASF

.asf
.wmv

VC-1 (WMV9)

WMA7/8/9 Std
WMA9 Pro

yes

DivX

.divx
.div

DivX 3,4,5,6

yes

Xvid

.xvid

Xvid

MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
PCM
ADPCM

MKV

.mkv

MPEG-1 Video
MPEG-2 Video
MPEG-4 part2
H.264 (MPEG-4 AVC)

MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
MPEG-2/4 LC-AAC
MPEG-4 HE-AAC

yes

Flash
Video
(FLV1)

.flv
.swf

Sorenson H.263
(FLV1)
H.264 (MPEG-4 AVC)

MPEG-1/2 Layer3
MPEG-2/4 LC-AAC
L-PCM
ADPCM

yes

3GPP

.3gp

MPEG-4 part2
H.264 (MPEG-4 AVC)

MPEG-2/4 LC-AAC

yes

Motion
JPEG

.avi
.mp4
.mkv

JPEG

L-PCM
ADPCM

yes

MP3

.mp3

–

MPEG-1/2 Layer-3

yes

MP4

.m4a

–

MPEG-2/4 LC-AAC

yes

WMA

.wma

–

WAV

LPCM

.wav

–

WMA7/8/ Std

yes

WMA9 Std

yes

WMA9 Pro

yes

LPCM
ADPCM
MPEG-1/2 Layer-3
WMA7/8/9/ Std
WMA9 Pro

yes

–

Note

USB
Maximum number of
files: 1000 / folder
Maximum music size:
Unlimited
Network
Sampling rate: 32,
44.1 and 48 KHz
Bit rate: 32 to
320 kbps
Maximum number of
files: 1000 / folder
Maximum music size:
Unlimited
NOTE: Some files
may not be played.

English

Media
Player

English

INFORMATION

3D Support Format (HDMI)
Resolution

Aspect
ratio

V.Frequency

H.Frequency

Pixel Clock
Frequency

720 × 480p

16:9

59.940/60.000 Hz

31.469/31.500 kHz

54.000/54.054 MHz

Side by Side (Full)

27.000/27.027 MHz

Side by Side (Half)

27.000 MHz

Side by Side (Full)

3D Structure

Top and Bottom
720 × 576p

16:9

50.000 Hz

31.250 kHz

Side by Side (Half)
Top and Bottom
1280 × 720p

16:9

59.940/60.000 Hz

90.0/89.91 kHz

148.352/148.500 MHz

Frame Packing

44.955/45.000 kHz

74.176/74.250 MHz

Side by Side (Half)

75.000 kHz

148.500 MHz

Frame Packing

37.500 kHz

74.250 MHz

Side by Side (Half)

59.940/60.000 Hz

33.716/33.750 kHz

74.176/74.250 MHz

Side by Side (Half)

50.000 Hz

28.130 kHz

74.250 MHz

Side by Side (Half)

23.976/24.000 Hz

53.940/54.000 kHz

148.352/148.500 MHz

Frame Packing

26.973 kHz

74.176/74.250 MHz

Side by Side (Half)

67.433/67.500 kHz

148.352/148.500 MHz

Frame Packing

33.716/33.750 kHz

74.176/74.250 MHz

Side by Side (Half)

50.000 Hz

56.250 kHz

148.500 MHz

Side by Side (Half)

59.940/60.000 Hz

67.433/67.500 kHz

148.352/148.500 MHz

Side by Side (Half)

Top and Bottom
50.000 Hz

Top and Bottom
1920 × 1080i

16:9

Top and Bottom
Top and Bottom
1920 × 1080p

16:9

Top and Bottom
29.970/30.000 Hz

Top and Bottom
Top and Bottom
Top and Bottom

INFORMATION

English

3D Support Format (DTV)
Video Format

Aspect
ratio

V.Fraquency

3D Structure

480i, 480p

16:9

59.940/60.000 Hz

Side by Side (Half)

576i, 576p

16:9

50.000 Hz

Side by Side (Half)

720p

16:9

59.940/60.000 Hz

Side by Side (Half)

50.000 Hz

Side by Side (Half)

59.940/60.000 Hz

Side by Side (Half)

50.000 Hz

Side by Side (Half)

24.000 Hz

Side by Side (Half)

30.000 Hz

Side by Side (Half)

50.000 Hz

Side by Side (Half)

59.940/60.000 Hz

Side by Side (Half)

Top and Bottom
Top and Bottom
Top and Bottom
Top and Bottom
1080i

16:9

Top and Bottom
Top and Bottom
1080p

16:9

Top and Bottom
Top and Bottom
Top and Bottom
Top and Bottom
* Side by Side (Full) is composed of left and right stereoscopic pictures that each size is equal to 2D.
* The 3D function and 2D to 3D conversion function does not support all content depending on its input source format.

Side by Side (Full)
L
2D Video

3D Video

Side by Side (Half)
L
2D Video

3D Video

English

INFORMATION

Licence information
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• HDMI, the HDMI logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• This product contains Adobe® Flash®
Player software under license from
Adobe Systems Incorporated.
Copyright© 1995-2009 Adobe Systems
Incorporated.
All rights reserved. Adobe and Flash are
trademarks of Adobe Systems
Incorporated.
• DivX®, DivX Certified®, DivX Plus® HD
and associated logos are trademarks of
Rovi Corporation or its subsidiaries and
are used under license.
Covered by one or more of the following
U.S. patents:
7,295,673; 7,460,668; 7,515,710;
7,519,274
• DVB is a registered trademark of the
DVB Project.
• Hybrid TV Standard is implemented
according to ETSI TS 102 796 v1.1.1.
• Intel and the Intel logo are trademarks of
Intel Corporation in the U.S. and/or other
countries.
• MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered
trademarks of the MHL, LLC.
• Manufactured under license from
Audyssey Laboratories.
U.S. and foreign patents pending.
Audyssey Premium Television™ is a
trademark of Audyssey Laboratories.
Audyssey Premium Television™ is a
suite of technologies that remove the
acoustical problems caused by small
speakers and drivers.
Working together these technologies
deliver a better translation of the audio
content and make the television
experience sound closer to the original.

• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A
CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE
WITH THE AVC STANDARD (AVC VIDEO) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND
NONCOMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4
VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A
CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD ("MPEG-4 VIDEO") AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG
LA,L.L.C.
SEE HTTP://WWW.MPEGLA.COM
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
• RealD and the RealD logo are trademarks of RealD Inc.
• You can check the software components and obtain a
copy of the source codes including GPL and LGPL
subject to such EULA requirements on the following
Home Page:
http://tesc.toshiba.co.uk/Web/Website.nsf/
ContentFrameSet?OpenFrameset
There will be a charge to cover the costs of providing the
source code.

• DLNA™, DLNA CERTIFIED™, DLNA CERTIFIED Logo
are trademarks, service marks, or certification marks of
the Digital Living Network Alliance.

INFORMATION

English

EU Conformity Statement

This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice
Podgórne 55-040 Kobierzyce, Poland
This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage
Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.
Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP) and 2009/125/EC (ErP) and its
related implementing measures.
If this product has an integrated Wireless LAN feature, the Radio Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC is also applicable.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any
proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of
separately from household waste. Integrated batteries and accumulators can be disposed of with the
product. They will be separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper
disposal of products and batteries and thus help to prevent potential negative consequences for the
environment and human health.
For more detailed information about the collection and recycling programmes available in your country,
please contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be
collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/
or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead
(Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment
and human health.
For more detailed information about the collection and recycling programmes available in your country,
please contact your local city office or the shop where you purchased the product.

English

INFORMATION

Cautions and other information for 3D
Important information for 3D viewing
Available 3D glasses :
Toshiba FPT-AG03
(L73*5D/M83*5D: 2pcs supplied, L73**RK/L73**RB:
1pcs supplied, L73*3D/L73*1D: Not supplied)
CAUTION
• This product contains a coin/button cell battery.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• The 3D function has been designed for private use and
entertainment in your home environment.
Please note that any commercial use of the 3D
function could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect the
intellectual property rights of third parties.
About handling the 3D glasses
• Do not leave the 3D glasses or the accessories within
the reach of small children.
Inhaling or swallowing them may cause suffocation or
lesions in the stomach wall.
If swallowed, consult a doctor immediately.
• Do not repair, modify, or disassemble the 3D glasses
by yourself.
Doing so may cause a fire or cause you to become
indisposed while viewing 3D images.
Contact the Toshiba Call Center for repair of your 3D
glasses.
• Do not expose the glasses to excessive heat such as
sunshine, fire, or the like.
About the 3D glasses
• Do not use the 3D glasses if they are not working
properly or broken.
Continuing to use them in such a state may cause injury,
eye strain, or indisposition.
Do not use the 3D glasses if they are broken or have any
cracks.
• Do not stand or walk while wearing 3D glasses.
You may lose your balance which could result in falls or
other accidents.
• Do not wear the 3D glasses for any purpose other than
viewing 3D programming.
3D glasses do not function as sunglasses.
• Do not drop, exert pressure on, or step on the 3D
glasses.
Doing so may damage the glass section, which may result
in injury.
Exposing the 3D glasses to liquid or excessive heat may
damage the liquid crystal shutter function.
• If your nose or temple turns red, or you feel pain or
discomfort, stop using the 3D glasses.
Such symptoms as above may occur if you keep wearing
them for a long time, which may also cause indisposition.
• Be careful not to pinch your fingers in the hinge of the
3D glasses.

Cautions on watching 3D images
• Some viewers may experience a seizure or blackout
when exposed to certain flashing images or lights
contained in certain 3D television pictures or video
games.
Anyone who has had a seizure, loss of awareness, or other
symptoms linked to an epileptic condition, or has a family
history of epilepsy, should contact a health care provider
before using the 3D function.
• Avoid use of the 3D function when under the influence
of alcohol.
• If you are ill or feel ill, you should refrain from viewing
3D images, and consult your health care provider as
may be appropriate.
• If you experience any of the following symptoms when
viewing 3D video images, stop viewing and contact
your health care provider:
Convulsions, eye or muscle twitching, loss of awareness,
altered vision, involuntary movements, disorientation, eye
strain, nausea/vomiting, dizziness, headaches.
• If you feel eye fatigue or other discomfort from viewing
3D video images, remove the 3D glasses and
discontinue use until the condition is eliminated.
• Viewing in 3D may cause dizziness and/or
disorientation for some viewers.
Therefore, to avoid injury do not place your TV near open
stairwells, balconies, or wires.
Also do not sit near objects that could be broken if
accidentally hit.
• When viewing 3D images, always wear 3D glasses.
Watching 3D images without 3D glasses may cause eye
strain.
Use specified 3D glasses.
• When watching 3D images, do not wear 3D glasses at
an angle and do not lie down.
If you watch while lying down or with the glasses tilted, the
3D effect is lost and it may cause eye strain.
• If 3D images often appear in double or if you cannot
see the images in 3D, stop viewing.
Continuous viewing may cause eye strain.
• Due to the possible impact on vision development,
viewers of 3D video images should be age 6 or above.
Children and teenagers may be more susceptible to health
issues associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.
• Watching TV while sitting too close to the screen for
an extended period of time may cause eye strain.
The ideal viewing distance should be at least three times
the screen height.
• Switching left and right images
The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and
right sides of the 3D image.
If the 3D PIN number has been forgotten:
Use the Master PIN code of 1276, and then change to a
number of your choice. Select 3D PIN from the 3D Setup
menu to enter PIN.

100

INFORMATION

Notes on IR communication
• Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.
• Do not cover the IR sensor on the 3D glasses with
stickers or labels.
• Keep the IR sensor on the 3D glasses clean.
• The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glasses not to work
correctly. Use the TV and 3D glasses in a place where
they will not interfere with other devices or products.
Notes on watching the TV
• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
• If you use any device, such as a mobile phone or
mobile wireless device, near the 3D glasses, the 3D
glasses may not work correctly.
• Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.
– 3D glasses: 0 °C - 40 °C (32 °F - 104 °F)
– TV: 0 °C - 35 °C (32 °F - 95 °F)

• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or use another
light. (It is not recommended to watch the TV in a dark
room, especially for children.)
• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.
• The 2D to 3D conversion function is activated and
controlled by you according to your personal
preferences.
• The 2D to 3D conversion function is meant for
enjoyment of 2D home video, and other 2D content you
create, in 3D according to your personal preferences.
• The 2D to 3D conversion function is not intended for
use with pre-recorded 2D copyrighted content owned
by a third-party unless the copyright owner has given
direct or indirect permission, or unless applicable law
permits such use.
About the connecting cable
• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.

101

English

Notes on handling the 3D glasses’ liquid crystal shutter
lenses
• Do not put excessive force on the lenses.
• Do not scratch the surface of the lenses with sharp
objects.
• Do not drop or bend the 3D glasses.

English

INFORMATION

Specifications and accessories
Receiving systems
DVB-T Broadcast systems/
Broadcast systems/channels
channels
UK
UHF 21-68
PAL-I
UHF UK21-UK69
France
VHF 05-10
PAL-B/G
UHF E21-E69
(VHF 01-05)
VHF E2-E12,
UHF 21-69
S1-S41
Germany
VHF 05-12
SECAM-L
UHF F21-F69
UHF 21-69
VHF F1-F10, B-Q
Austria
VHF 05-12
SECAM-D/K UHF R21-R69
UHF 21-69
VHF R1-R12
Switzerland VHF 05-12
UHF 21-69
Italy
VHF 05-12 (D,E,F,G,H,H1,H2)
UHF 21-69
Spain
UHF 21-69
Netherlands VHF 05-12
UHF 21-69
Greece
VHF 05-12
UHF 21-69

Power consumption
(approx.)
Standby power consumption
(approx.)
Energy Efficiency Class

40L/40M
50L/50M
58L/58M
On-mode power consumption* 40L/40M
(approx.)
50L/50M
58L/58M
Average annual energy
40L/40M
consumption**
50L/50M
(approx.)
58L/58M

Dimensions
(approx.)

PAL, SECAM, NTSC 3.58/4.43

Input/Output

EXT 2

Input

HDMI 1/2/3/4 Input
PC

Input

Digital Audio Output
(S/PDIF)
LAN port
USB 1/USB 2 port

Headphone socket
Stereo

21-pin SCART

RGB, A/V input
AV out, TV out
RCA jacks
Y, PB /CB, PR /CR
RCA jack
Video
(Y is shared)
RCA jacks
Audio L + R
(shared)
HDMI® compliant HDCP compliant
HDMI 3 is compatible with MHL
Mini D-sub 15-pin
Analogue
Optical

Weight
(approx.)

RJ-45
Media Player
Interface version: USB 2.0
USB class: Mass Storage
File system: FAT16 and FAT32
3.5 mm stereo
A2, Nicam
2 carrier system

Supplied
accessories

Visible Screen Size
(approx.)

40L/40M
50L/50M
58L/58M

102 cm
126 cm
146 cm

Screen resolution
(H × V pixels)

40L/40M
50L/50M
58L/58M
16:9
Main:

1920 × 1080
1920 × 1080
1920 × 1080

Display
Sound output
(at 10 % distortion)

A+
A+
A+
48.1 W
75.9 W
88.0 W
66.7 kWh/y
105.3 kWh/y
122.1 kWh/y

** Operating 4 hours a day and 365 days a year.

External connections
EXT 1

119 W
154 W
184 W

* Tested in accordance with IEC 62087-BD in default settings.

DVB-C Broadcast systems
DVB-T2 Broadcast systems (L735*/L736*/M836* series only)
DVB-S/DVB-S2 Broadcast systems (L736*/M836* series only)
Video Input

40L/40M
50L/50M
58L/58M
0.3 W

Operating
condition
Wireless
connection

Optional
accessories

40L73*6

61.0 cm (H) 92.2 cm (W)
18.0 cm (D)
40L/40M
60.0 cm (H) 92.2 cm (W)
(except 40L73*6)
18.2 cm (D)
50L/50M
73.3 cm (H) 113.1 cm (W)
23.2 cm (D)
58L/58M
85.1 cm (H) 130.6 cm (W)
33.4 cm (D)
(Height dimension includes foot stand)
40L73*6
11.5 kg
40L/40M
12.0 kg
(except 40L73*6)
50L/50M
20.0 kg
58L/58M
28.0 kg
Temperature 5 °C - 35 °C (41 °F - 94 °F)
Humidity 20 - 80 % (non-condensing)
• Standard: IEEE 802.11a/b/g/n
• Frequency Range: 5.15-5.35 GHz,
5.47-5.725 GHz, 5.725-5.850 GHz,
2.400-2.4835 GHz
• Security: WEP64/128, TKIP, AES,
WPA/WPA2-PSK, WPS, None
• Toshiba 3D glasses : FPT-AG03 : L73*5D/
M83*5D (2pcs), L73**RK/L73**RB (1pcs)
• Remote control CT-90430
2 batteries (AAA, IEC R03 1.5 V)
• Screw (for TV mounting) See page 5.
• USB HDD : HDTC610EK3B1,
HDTC610EL3B1, HDTC610EW3B1
• Skype camera : TALK-7291
• Toshiba 3D glasses : FPT-AG03

10 W + 10 W

Specification is subject to change without notice.

102

TOSHIBA Television Central Europe Sp. z o.o.
ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2013:05:27 16:14:44+09:00
Modify Date                     : 2013:05:27 16:15:05+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:05:27 16:15:05+09:00
Format                          : application/pdf
Document ID                     : uuid:01f585d7-ded9-4be0-aa9d-99c63b94b861
Instance ID                     : uuid:4bd94436-1255-4854-8877-6f16030d1bf5
Page Mode                       : UseOutlines
Page Count                      : 103

EXIF Metadata provided by EXIF.tools

Toshiba L7333 40 Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation