Toshiba Rdxv60 Users Manual

2015-03-11

: Toshiba Toshiba-Rdxv60-Users-Manual-656343 toshiba-rdxv60-users-manual-656343 toshiba pdf

Open the PDF directly: View PDF PDF.
Page Count: 84

Scroll down to view the document on your mobile browser.
1ENPALDUBBINGVCR RECVCR HDD DVD HDD DVDHDD & DVD / VIDEO CASSETTE RECORDERRDXV60KBOWNER’S MANUALIntroduction Connections Playback Editing OthersFunction SetupRecording VCR FunctionsBasic Setup / TV View Operation© 2010 Toshiba CorporationFor Customer Use:Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference.Model No.  __________________________Serial No.  __________________________E3TK6BD_EN.book  Page 1  Wednesday, February 17, 2010  10:18 AM
2EN.PrecautionsLaser SafetyThis unit employs a laser. Only qualified service personnel should remove the cover or attempt to service this unit, due to the possibility of eye injury.Power SupplyThe power supply is connected and the unit is live when the mains cable is plugged into a 220 - 240 V~, 50 Hz AC outlet. To operate the unit, press [BON\STANDBY].Caution1. Do not attempt to open the cabinet. There are no parts inside you can service. Refer all servicing to qualified service personnel.2. Slots and openings in the cabinet at the sides and underneath are provided for ventilation. To ensure reliable operation and to protect the unit from overheating, these openings must not be blocked or covered. Avoid installation in enclosed spaces such as bookcases unless suitable ventilation is provided.3. Keep the unit away from radiators and other heat sources.4. Avoid use near strong magnetic fields.5. Do not push objects of any kind into the unit through the cabinet slots or openings as they could touch electrically live parts or short circuit parts resulting in a fire or electric shock.6. To prevent fire or shock hazard, do not expose this apparatus to dripping or splashing, no objects filled with liquids, such as vases, should be placed on the apparatus. 7. Do not stand the unit vertically. Use the unit in a horizontal (flat) position only.8. Before attempting to operate the unit, make sure that the timer recording mode is off.9. This product is in Stand-by mode when turned off while the mains cable is connected. The front panel display will not light up. This is a Power Saving Mode (ECO) for standby.10. Do not place any combustible objects on the device (candles, etc.).11. Before moving the unit, be sure to remove any media and unplug the mains cable from the AC outlet.12. Disconnect the mains plug to shut off the unit, if you suspect a fault has developed, or if it will not be used for an extended period.13. The mains plug shall remain readily operable.14. Read the instruction manual, and QSG to ensure correct and safe installation and interconnection of the unit in multimedia systems.15. Keep a distance of 20 cm around the ventilation openings of the apparatus.IntroductionWARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.The important note is located on the rear of the cabinet.CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.RISK OF ELECTRIC SHOCK DO NOT OPENCAUTIONThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of   sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The symbol for CLASS II (Double Insulation)CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.LOCATION: INSIDE, NEAR THE DECK MECHANISM.WARNING: LIVE PARTS INSIDE.DO NOT REMOVE ANY SCREWS.A NOTE ABOUT RECYCLINGThis product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.This product consists of materials which can be recycled and reused if disassembled by a specialised company.E3TK6BD_EN.book  Page 2  Wednesday, February 17, 2010  10:18 AM

Navigation menu