Toshiba Sd 3800 Owners Manual

2014-12-13

: Toshiba Toshiba-Sd-3800-Owners-Manual-128931 toshiba-sd-3800-owners-manual-128931 toshiba pdf

Open the PDF directly: View PDF .
Page Count: 66

Download
Open PDF In Browser	View PDF

Introduction

Connections

DIGITAL VIDEO

Basic playback

DVD VIDEO PLAYER

SD-3800
OWNER’S MANUAL

Advanced
playback

Quick control

Function setup

Others

79077213
PM0004882011

Introduction

SAFETY PRECAUTIONS
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR

WARNING :
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USERSERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.

The symbol for CLASS II (Double Insulation)

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

CAUTION:

This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for
future reference. Should the unit require maintenance, contact an authorized service location see service procedure.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING:

Changes or modifications made to this equipment, not expressly approved by Toshiba, or
parties authorized by Toshiba, could void the user’s authority to operate the equipment.

The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in
each pole shall be incorporated in the electrical installation of the building.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.

Introduction

CAUTION:

In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD player.
Model No.

Serial No.

Retain this information for future reference.

Location of the required label

PRODUCT IS CERTIFIED BY THE MANUFACTURER TO
COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J
APPLICABLE AT THE DATE OF MANUFACTURE.
MANUFACTURED

1-1,SHIBAURA 1-CHOME,MINATO-KU.
TOKYO 105-8001,JAPAN

Introduction

IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Introduction

8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

S3125A

Introduction

IMPORTANT SAFETY INSTRUCTIONS
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.

14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

15. When you use headphones, keep the volume at a moderate level. If you use
the headphones continuously with high volume sound, it may cause hearing
damage.

16. Do not overload wall outlets; extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.

17. Never insert objects of any kind into this apparatus through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the apparatus.

18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do
so may cause serious personal injury.
Introduction

19. Do not place a heavy object on or step on the apparatus. The object may fall,
causing serious personal injury and serious damage to the apparatus.

20. Do not use a cracked, deformed, or repaired disc. These discs are easily
broken and may cause serious personal injury and apparatus malfunction.

Introduction

Precautions

Notes on handling
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
The top and rear panels of the DVD player may
become warm after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD player for a long period,
the unit may not function properly in the future. Turn
on and use the DVD player occasionally.

Notes on locating
Place the DVD player on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc may come off
the proper position and cause damage to the DVD
player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.

Notes on moisture condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD player.
le of mo
Examp ensat isture
ion!
cond

Optical pick-up
lens

Moisture condensation occurs during the
following cases.
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot
and humid place just after you move the unit from an
air conditioned room.
When you use the DVD player in a humid place.
It’s too
warm!

Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.

To obtain a clear picture
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality deteriorates. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.

Do not use the DVD player when moisture
condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture.
Keep the DVD player connected to the wall outlet and
moisture condensation will seldom occur.

it!

Wall outlet

Notes on Discs

Structure of disc contents

Do not touch the playback side of the disc.

Introduction

On handling discs

Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs/
audio CDs are divided into tracks.
DVD video disc
Title 2

Title 1
Chapter 1

Chapter 2

Chapter 1

Chapter 2

Chapter 3

Playback side

Do not attach paper or tape to discs.
VIDEO CD/Audio CD
Track 1

Track 2

Track 3

Track 4

Track 5

On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.

Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.

Notes on copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.

On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.

DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

Introduction

Notes on Discs (continued)

About this owner’s manual
This owner’s manual explains the basic instructions of
this DVD player. Some DVD video discs are produced in
a manner that allows specific or limited operation during
playback. As such, the DVD player may not respond to
all operating commands. This is not a defect in the DVD
player. Refer to instruction notes of discs.
“ ” may appear on the TV screen during operation.
A “ ” means that the operation is not permitted by the
DVD player or the disc.

Playable discs
This DVD player can play the following discs.
Disc Mark

Contents

12 cm
video
(moving
pictures)
+
Audio

DVD
video
discs

Notes on region numbers

8 cm

The region number of this DVD player is 1. If region
numbers, which stand for their playable area, are printed
on your DVD video disc and you do not find 1 or ALL ,
disc playback will not be allowed by the player. (In this
case, the DVD player will display a message on-screen.)

12 cm

VIDEO
CDs

On VIDEO CDs
This DVD player supports VIDEO CDs equipped with
the PBC (Version 2.0) function. (PBC is the abbreviation
of Playback Control.) You can enjoy two playback
variations depending on types of discs.
• VIDEO CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function
(Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.

Disc
Size

DIGITAL VIDEO

video
(moving
pictures)
+
Audio

8 cm

12 cm

Audio
CDs

Audio
8 cm
(CD single)

The following discs are also available.
DVD-R discs of DVD video format
CD-R/CD-RW discs of CD-DA format
Some of these discs may be incompatible.

• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or non-standardized
discs, etc., even if they may be labeled as above.
• This DVD player uses the NTSC color system, and
cannot play DVD video discs recorded in any other
color system (PAL, SECAM, etc.).

Table of Contents

SAFETY PRECAUTIONS .......................... 2
IMPORTANT SAFETY INSTRUCTIONS ... 4
Precautions ............................................... 8
Notes on Discs .......................................... 9
Notes on region numbers ............................... 10

Table of Contents.................................... 11
Identification of Controls ....................... 12
Front panel ..................................................... 12
Rear panel ...................................................... 12
DVD display .................................................... 13
Remote control ............................................... 14
Loading batteries ............................................ 15
Operating with the remote control .................. 15

Connections
Connecting to a TV ................................. 18

Advanced playback
Accessing a Specific Location Directly .. 34
Entering the elapsed time of the desired
location ......................................................... 34

Playing Repeatedly ................................. 35
Repeating a title, chapter, or track .................. 35
Repeating a specific segment ........................ 35

Playing in a Favorite Order .................... 36
Setting titles, chapters, or tracks in a favorite
order ............................................................. 36

Playing in Random Order ....................... 37
Playing titles, chapters, or tracks in random
order ............................................................. 37

Zooming a Picture .................................. 38
Zooming a picture ........................................... 38

Selecting the Sound Enhancement
(E.A.M.) .................................................... 39
Selecting the sound enhancement ................. 39

Connecting to a TV ......................................... 18
Connecting to an audio system and TV
equipped with component video inputs ........ 19

Selecting the Camera Angle .................. 40

Connecting to Optional Equipment ...... 20

Selecting Subtitles ................................. 41

Connecting to an amplifier equipped with a
Dolby Digital decoder ................................... 21
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ............................ 21
Connecting to an amplifier equipped with a
DTS decoder ................................................ 22
Connecting to an amplifier equipped with an
MPEG2 audio decoder ................................. 22
Connecting to an amplifier equipped with a
digital audio input ......................................... 23

Basic playback
Playing a Disc ......................................... 26
Basic playback ............................................... 26

Changing the camera angle ........................... 40
Selecting a subtitle language ......................... 41

Selecting a Language ............................. 42
Selecting a playback audio setting ................. 42

Quick control
Using the Virtual Remote Control
- V-REMOTE - ........................................... 46
Selecting the Playback Function
- QUICK - .................................................. 47
Accessing Features
- NAVI - ..................................................... 48

Function setup

Variable Speed Playback ........................ 28

Customizing the Function Settings ...... 56

Playing in fast reverse or
fast forward directions .................................. 28
Playing frame by frame .................................. 28
Playing in slow-motion .................................... 29
Resuming playback from the same location ... 29

Setting procedure ........................................... 56
Setting details ................................................. 58

Locating a Desired Section ................... 30
Locating a title using the top menu ................. 30
Locating a desired section by entering its
corresponding number ................................. 31
Locating a specific chapter or track ................ 31

Introduction

Table of Languages ................................ 65

Others
Before Calling Service Personnel ......... 68
Specifications ......................................... 69
LIMITED WARRANTY DVD PLAYER ...... 70

Playing an MP3 Encoded CD ................. 32
Playing an MP3 Encoded CD ......................... 32

Introduction

Identification of Controls
See the page in

for details.

Front panel

ON/STANDBY indicator 26
NAVI button 48

OPEN/CLOSE button 26

PLAY button 26

Disc tray 26

MENU button

OPEN/CLOSE

ON/STANDBY

NAVI

RETURN TOP MENU MENU

PAUSE button 27
STOP button 27

PAUSE

ZOOM

STOP

PLAY

SKIP

ENTER

DVD display 13
SKIP buttons 31
ZOOM button 38
Direction buttons / ENTER button 56
PROGRESSIVE indicator 19
TOP MENU button 30
RETURN button 56
ON/STANDBY button 26

Rear panel
When connecting the optical digital cable, remove
the cap and fit the connector into the jack firmly.
When not using the jack, keep the cap inserted
to protect it from dust intrusion.

VIDEO OUT (Y/PB/PR)
(Component video) jacks 19

BITSTREAM/PCM OPTICAL (DIGITAL)
AUDIO OUT jack 21 22 23

VIDEO OUT jack 18

AUDIO OUT

VIDEO OUT
VIDEO

BITSTREAM
/PCM

SELECT
I

L
R
ANALOG

COAXIAL OPTICAL
DIGITAL

BITSTREAM/PCM COAXIAL (DIGITAL)
AUDIO OUT jack 21 22 23
ANALOG AUDIO OUT (L/R) jacks 18 19
S VIDEO OUT jack 18
SELECT (I/P) switch 19

Power cord

FL DIMMER

Normal

Dimmed

Introduction

Pressing of the FL DIMMER button on the remote
control changes the brightness of the display.

DVD display

Off

Chapter number indicator
Play mode indicator
Memory playback indicator

Title number indicator

Track number
indicator

TITLE

CHP

TRK

Random playback indicator

M R

A-B

DVD
VCD
Multifunctional indicator (indicates operating status or
messages, etc.)
Angle icon indicator
DVD/VIDEO CD/CD indicator
Repeat playback indicator

When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches
them to the title/chapter/track number indicators. Some discs may not permit this operation.

The indicators vary depending on the kinds of discs you play.

DVD video disc

• During playback:

VIDEO CD

• During playback:

Example

• During playback:

Example
TITLE

CHP

Audio CD

Example
TRK

TRK

DVD
CD

VCD

Playing chapter 3 of title 2

Some discs may not display chapter
numbers or elapsed time.

Playing track 6

Some discs may not display track
numbers or elapsed time.

Introduction

Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in

for details.

Remote control
OPEN/CLOSE button 26
SETUP button 56

OPEN/CLOSE

ZOOM

PROGRESSIVE button 19
FL DIMMER button 13
E.A.M. button 39

Power button 26
BRIGHTNESS

PROGRESSIVE SETUP

E.A.M.

BRIGHTNESS buttons 52

FL DIMMER

V-REMOTE button 46

FWD button 28

NAVI button 48
NU

REV button 28

NA
VI

MENU button*

Direction buttons 56
( / / / )
CLEAR button 31

ZOOM buttons 38

V-REMOTE

TOP MENU button 30

TOP
ME
N

QUICK button 47

IC
QU

ENTER

CLEAR

RETURN

PAUSE/STEP

RETURN button 56

SKIP

FWD

REV

STOP

ENTER button 56

PLAY

SKIP buttons 31
PLAY button 26

PAUSE/STEP button 27

SLOW

STOP button 27

FL SELECT

SLOW buttons 29
FL SELECT button 13

ANGLE

SUBTITLE

AUDIO

DNR

DNR button 52

ANGLE button 40
SEARCH

SUBTITLE button 41

Number buttons 31

+10

RANDOM MEMORY REPEAT

AUDIO button 42
T button 31

0
A-B RPT

RANDOM button 37

A-B RPT button 35

MEMORY button 36

REPEAT button 35

* MENU button
Use the MENU button to display the
menu included on many DVD video
discs. To operate a menu, follow the
instructions in “Locating a title using
the top menu.” 30

Open the cover.

Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.

30°

Insert batteries (AAA size).

Make sure to match the + and – on the batteries
to the marks inside the battery compartment.

Close the cover.

Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage from
battery corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.

Introduction

Loading batteries

30°

Within about 7 m (23 feet)

Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD player
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.

Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
• Do not open the remote control.

Connections
Read this chapter first to make all necessary
preparations.

Connecting to a TV
Connecting to an audio system
and TV equipped with
component video inputs
Connecting to an amplifier
equipped with a Dolby Digital
decoder
Connecting to an amplifier
equipped with Dolby Surround
Pro Logic
Connecting to an amplifier
equipped with a DTS decoder
Connecting to an amplifier
equipped with an MPEG2 audio
decoder
Connecting to an amplifier
equipped with a digital audio
input

Connections

Connecting to a TV
Connect the DVD player to your TV.

For details of output sound, see 43 .

Connecting to a TV
Signal flow
AUDIO OUT

VIDEO OUT
VIDEO

BITSTREAM
/PCM

SELECT
I

L
R
ANALOG

COAXIAL OPTICAL
DIGITAL

To S VIDEO OUT
(yellow)

To VIDEO
OUT

(red)

(white)

To wall outlet

To ANALOG AUDIO
OUT

SELECT
I

Set to “I.”
S video cable
(not supplied)

TV or monitor with
(white) audio/video inputs

Audio/video cable
(supplied)
To audio inputs

(red)

To video input (yellow)
If the TV has an S video input, connect the
DVD player with an S video cable. When
using an S video cable, do not connect the
yellow video cable.

To S video input

• Make the following setting.
On-screen display

Select:

Page

“Digital Output”

“Bitstream”
or
“PCM”

56
59

Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.

INTERLACED outputs/inputs (ColorStream®)
Some TVs or monitors are equipped with component video
inputs. Connecting to these inputs allows you to enjoy
higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y,
CB, CR)
In some TVs or monitors, the color levels of the playback
picture may be reduced slightly or the tint may change. In
such a case, adjust the TV or monitor for optimum
performance.

PROGRESSIVE outputs/inputs (ColorStream®Pro)
Some TVs or monitors are equipped with component video
inputs that are capable of reproducing a progressively
scanned video signal. Connecting to these inputs allows
you to view the highest quality pictures with less flicker.

Connecting to an audio system and TV equipped with component video inputs
Connections

Signal flow
AUDIO OUT

VIDEO OUT
VIDEO

BITSTREAM
/PCM

SELECT
I

(red)

L
R
ANALOG

COAXIAL OPTICAL
DIGITAL

(white)

To PR
VIDEO
OUT

To PB
VIDEO
OUT

To Y
VIDEO
OUT

To wall outlet

To audio
inputs of the
amplifier
(red)

(white)

To Y video
input
To PB video input
To PR video input

Audio system

Switching the output signal (interlaced/
progressive) using the remote control
(only when the SELECT (I/P) switch is set to “P”)

TV or monitor equipped
with component video
(INTERLACED) inputs
or
TV or monitor equipped
with component video
(PROGRESSIVE) inputs

SELECT
I

Set to
“I.”
Set to
“P.”

* After setting this switch (I/P), be sure to
power off the DVD player then turn it on
to activate the setting.

You can temporarily switch the output signal for better
picture quality.
Press PROGRESSIVE on the remote control.
While the DVD player is outputting progressive signals,
the indicator on the right side on the front panel
illuminates.

• Make the following setting.
On-screen display

Select:

Page

“Digital Output”

“Bitstream”
or
“PCM”

56
59

Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD
player away from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
• The S VIDEO OUT jack and the VIDEO OUT jack cannot output video signals simultaneously, if you select progressive
signal when the SELECT (I/P) switch is set to “P.”

Connections

Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to
optional audio equipment.

• For connection to your TV, see “Connecting to a TV”
18 19 .
• For details of output sound, see 43 .
• This section uses the following reference marks.

: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow

Notes
• DO NOT connect the BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack of the DVD player to the AC-3 RF input
of a Dolby Digital Receiver. This input on your A/V
Receiver is reserved for Laserdisc use only and is
incompatible with the BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack of the DVD player.
• Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT
jack of the DVD player to the “DIGITAL (OPTICAL)” or
“DIGITAL (COAXIAL)” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment
as well.
• When you connect the DVD player to other equipment, be
sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic
range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.

Warning
• When you are connecting (via the BITSTREAM/PCM
(DIGITAL) AUDIO OUT jack) an AV decoder that does
not have Dolby Digital or MPEG2 decoding function, be
sure to set “Digital Output” to “PCM” from the on-screen
displays 56 59 . Otherwise, high volume sound may
damage your hearing as well as the speakers.
• DO NOT play DTS-encoded discs when you are
connecting an AV decoder that does not have DTS
decoding function.
• When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog audio
output jacks. To avoid possible damage to the audio
system, you should take proper precautions when the
analog audio output jacks of the DVD player are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the BITSTREAM/PCM (DIGITAL) AUDIO
OUT jack of the DVD player.

Connecting to an amplifier equipped with a Dolby Digital decoder

Amplifier equipped with a
Dolby Digital decoder

R
L
ANALOG

To OPTICAL
type digital
audio input

To COAXIAL
type digital
audio input

On-screen display

Select:

“Digital Output”

“Bitstream”

Page

AUDIO OUT

VIDEO OUT
VIDEO

56
59

COAXIAL OPTICAL
BITSTREAM/PCM

Recording system

Connect either.

75 Ω coaxial cable
Optical digital cable

Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an
amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.

• Make the following setting.
On-screen display

Select:

Page

“Digital Output”

“Bitstream”
or
“PCM”

56
59

Be sure to set “Digital Output” to
“Bitstream” or “PCM” when you
enjoy sounds of Dolby Surround
Pro Logic using this connection.

With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
*

Amplifier equipped with
Dolby Surround Pro Logic

AUDIO OUT

VIDEO OUT
VIDEO

R
L
ANALOG

COAXIAL OPTICAL
BITSTREAM/PCM

* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.

To audio input
ANALOG AUDIO OUT

Audio cable

Connections

Dolby Digital
Manufactured under license from Dolby
Dolby Digital is the surround sound technology used in theaters showing the
Laboratories. “Dolby”, “Pro Logic” and
latest movies, and is now available to reproduce this realistic effect in the home.
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
You can enjoy motion picture and live concert DVD video discs with this dynamic
unpublished works. Copyright 1992-1997
realistic sound by connecting the DVD player to a 6 channel amplifier equipped
Dolby Laboratories. All rights reserved.
with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby
Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the • Use DVD video discs encoded via
the Dolby Digital recording
same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well
system.
as from titles with the Dolby Surround mark.
• Make the following setting.

Connections

Connecting to Optional Equipment (Continued)

Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
“DTS” and “DTS Digital Out” are
DTS is a high quality surround technology used in theaters and now available for trademarks of Digital Theater Systems,
Inc.
home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
• Use DVD video discs or audio
channel DTS encoded sound tracks on DVD video discs or audio CDs.
CDs encoded via the DTS
recording system.
• Make the following setting.
Amplifier equipped with
a DTS decoder

To OPTICAL
type digital
audio input

To COAXIAL
type digital
audio input

AUDIO OUT

VIDEO OUT

VIDEO

R
L
ANALOG

On-screen display

Select:

Page

“Digital Output”

“Bitstream”
or
“PCM”

Recording system

DTS

COAXIAL OPTICAL
BITSTREAM/PCM

Connect either.
75 Ω coaxial cable

Optical digital cable

Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio
decoder or MPEG2 audio processor.

Amplifier equipped with an
MPEG2 audio decoder

To OPTICAL
type digital
audio input

To COAXIAL
type digital
audio input

R
L
ANALOG

Select:

“Digital Output”

“Bitstream”

Recording system

MPEG2

Page
56
59

COAXIAL OPTICAL
BITSTREAM/PCM

Connect either.
75 Ω coaxial cable
Optical digital cable

On-screen display

AUDIO OUT

VIDEO OUT
VIDEO

• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.

Connecting to an amplifier equipped with a digital audio input

Amplifier equipped with
a digital audio input

To OPTICAL
type digital
audio input

To COAXIAL
type digital
audio input

R
L
ANALOG

On-screen display

Select:

“Digital Output”

“PCM”

Page
56
59

AUDIO OUT

VIDEO OUT
VIDEO

• Make the following setting.

COAXIAL OPTICAL
BITSTREAM/PCM

Connect either.
75 Ω coaxial cable
Optical digital cable

Connections

2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers).

Basic playback
Begin your operation.

Playing a Disc
Variable Speed Playback
Locating a Desired Section
Playing an MP3 Encoded CD

Basic playback

Playing a Disc
This section shows you the basics on how to play a disc.

CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
ON/STANDBY
indicator
/

/ ENTER

3 2, 4

PAUSE

STOP

1
MENU
TOP MENU

DVD-V VCD
CD

PLAY

DVD display

Basic playback

Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD player.

Press the power button (ON/STANDBY).
ON/STANDBY

The DVD player turns on and the
ON/STANDBY indicator on the
player illuminates.

When the DVD player is turned on for
the first time, an on-screen display will appear
to provide initial settings. Press the /
buttons to select an item, and press the
ENTER button. See the pages in
, and
make a selection using the / buttons, then
press the ENTER button.
On-Screen Language
TV Shape 58

After making all the settings, select “
press the ENTER button.

2
3

Place a disc on the disc tray.

The disc tray opens.

With the playback
side down.

• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out
of the guide, it may damage the disc and cause the
DVD player to malfunction.
• Do not place a disc which is unplayable in this
DVD player.

Press OPEN/CLOSE to close the disc
tray.
OPEN/CLOSE

Playback starts.

If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
using the top menu.” 30
You may need to press the TOP MENU or MENU
button to display disc menu (depending on the
actual DVD video disc.)

Note
If the disc tray contains a disc you have already played,
playback will begin from the location where you last stopped
playback. 29

To start playback in the stop mode

Press OPEN/CLOSE.
OPEN/CLOSE

” and

Press PLAY.
PLAY

To obtain a higher quality picture

1
2, 4
TOP MENU
MENU
ENTER
/
PLAY
STOP
PAUSE/STEP

Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD player, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.

About DVD-V VCD

The DVD-V VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD-V : DVD video discs.
CD : Audio CDs.

VCD : VIDEO CDs.

About the screen saver

Press PAUSE/STEP during playback.

If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD player
automatically appears (when “Screen Saver” is set to
“On” 62 ). To turn off the screen saver, press the PLAY
button.

PAUSE/STEP

To resume normal playback, press
the PLAY button.
• Sound is muted during still mode.

Automatic Power Off function
To stop playback
Press STOP.
STOP

If the DVD player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD player
will automatically turn itself off.

To remove the disc
Press OPEN/CLOSE.
OPEN/CLOSE

Remove the disc after the disc tray
opens completely.

Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.

Notes
• Do not move the DVD player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button twice on your remote control once the movie is completed.

Basic playback

To pause playback (still mode)

Basic playback

Variable Speed Playback
You can play discs at various speeds, and resume playback from the location
where you stopped playback.

FWD
REV
PLAY
PAUSE/STEP

DVD-V VCD
CD

Playing in fast reverse or fast forward directions

Press REV or FWD during playback.
REV

FWD

REV : Fast reverse playback
FWD: Fast forward playback
Each time you press the REV or
FWD button, the playback speed
changes.

DVD-V VCD
CD

To resume normal playback
Press PLAY.
PLAY

Notes
• The DVD player mutes sound and omits subtitles during
reverse and forward scan of DVD video discs.
• The playback speed may differ depending on the disc.

Playing frame by frame

Press PAUSE/STEP during still playback.
PAUSE/STEP

Each time you press the PAUSE/
STEP button, the picture advances
one frame.

To resume normal playback
Press PLAY.
PLAY

Note
The sound is muted during frame by frame playback.

PLAY
STOP
SLOW

DVD-V VCD
CD

Playing in slow-motion

SLOW

Each time you press the SLOW
button, the slow-motion speed
changes.

SLOW

If you press the SLOW
button
during playback, you can view the
picture in reverse slow-motion. (Only
when using a DVD video disc.)

To resume normal playback

Basic playback

Press SLOW during playback.

Press PLAY.
PLAY

Notes
• The sound is muted during slow-motion playback.
• The playback speed may differ depending on the disc.

Each time you press the SLOW
button, the slow-motion speed
changes.

DVD-V VCD
CD

Resuming playback from the same location

Press STOP at the location where you
want to interrupt playback.
STOP

The DVD player memorizes the
location where playback is stopped.

Press PLAY.
PLAY

The DVD player resumes playback
from the location where you stopped
playback.

To start playback from the beginning regardless
of the location where you stopped playback
1 Press STOP twice.
STOP

The DVD player erases the previous
location from its memory.

2 Press PLAY.
PLAY

DVD-V Playback starts from the

VCD
CD

beginning of the current title.
Playback starts from the
beginning of the disc.

• If you want to return to the beginning of a DVD video
disc, open and close the disc tray once with the
OPEN/CLOSE button before pressing the PLAY
button.
Notes
• Resuming cannot function when:
– you change the parental lock setting 62 or select a disc
menu language 60 .
– you play a PBC-featured VIDEO CD while “PBC” 64 is
set to “On.”
– you open the disc tray.
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while the
DVD player keeps a location in the memory may function
only after the memory is cleared.

Basic playback

Locating a Desired Section

TOP MENU
/ / /
ENTER

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks. You can quickly locate any specific title, chapter, or track.

DVD video disc
Title 1
Chapter 1 Chapter 2

DVD-V VCD
CD

VIDEO CD/Audio CD
Chapter 3

Press TOP MENU.

Press
want.

ENTER

Title 2
Chapter 2

Track 1

Track 2

Track 3

Track 4

Track 5

Locating a title using the top menu

The top menu appears on the TV
screen.

TOP
ME
NU

Chapter 1

e.g.

TITLE 1

TITLE 2

TITLE 3

TITLE 4

to select the title you

If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.

Press ENTER.
ENTER

Playback starts from chapter 1 of the
selected title.

Notes
• The instructions above describe basic procedures which
may vary depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
• If you display the top menu during playback and press the
TOP MENU button again without selecting any title, the DVD
player may resume playback from the point where you first
pressed the TOP MENU button (depending on the actual
DVD video disc.)
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that
displays the top menu as TITLE button.

CLEAR
/ / /
ENTER
SKIP
PLAY
T
Number buttons
DVD-V VCD
CD

Press T.
If you are using a VIDEO CD/audio CD, skip steps 1
and 2. Then at step 3, enter the number for the track
you want using the number buttons.
SEARCH

e.g.
1

Press /
to locate.

e.g. When you want to locate a
chapter.

Press /
section.

Press PLAY or ENTER.
PLAY

Playback starts from the
selected location.

–:––:––

to select a section you want

ENTER

Repeat steps 2 and 3 if necessary.

ENTER

4
5

Basic playback

Locating a desired section by entering its corresponding number

Notes
• Pressing the CLEAR button resets the numbers. To clear the
display, press the T button several times.
• This method of locating a title is available only on a disc that
contains title numbers.

– : –– : ––

to enter a number of the
Also the number buttons are
available.

ENTER

e.g. To enter 25

DVD-V VCD
CD

or +10

+10

Locating a specific chapter or track

Press SKIP
or
repeatedly to display
the chapter or track number you want.
Playback starts from the selected chapter or track.
SKIP

To locate succeeding chapters or
tracks.

SKIP

Playback starts from the beginning
of the current chapter or track.
When you press twice, playback
starts from the beginning of the
preceding chapter or track.

Notes
• Some titles may not display chapter numbers.
• When you set “Title Stop” to “Off” 64 , you can access
chapters in another title. If you go back to the preceding title
by pressing the SKIP
button, the DVD player locates the
first chapter of the title. When “Title Stop” is set to “On,” you
can access chapters only within the current title.
• If you press and hold the SKIP
or
button on the front
panel during playback, the DVD player performs fast reverse
or fast forward playback. You can vary the speed by
pressing the button further.
To locate chapters or tracks during fast reverse or fast
forward playback, first press the PLAY button to resume
normal playback, then use the SKIP
or
button.

Basic playback

Playing an MP3 Encoded CD

You can play MP3 files on this DVD player.

/ / /
ENTER
PLAY

PAUSE/STEP

Playing an MP3 encoded CD
MP3 disc compatibility with this player is limited as follows:
• Playable discs: CD-ROM, CD-R (650MB / 74 min. only)
CD-RW is not recommendable.
• Sampling Frequency: 44.1 kHz only
• Bit rate 32 kbps-320 kbps
• CD physical format: Mode 1, Mode 2 XA Form 1
• File system: ISO9660 Level 1
• File names are limited to eight characters or less and
must incorporate “MP3” extension.
e.g.“********.MP3”
• File names cannot contain special characters such as
“?!><+*}{`[@]:;\ /.,” etc.
• Total number of files on the disc should not exceed 254.
Preparations
• When you playback an MP3 encoded CD, set “Priority
Contents” to “ MP3 > JPG ”. 64

Place a CD that contains MP3 files on
the disc tray.

Press OPEN/CLOSE to load the disc.
OPEN/CLOSE

Playback starts.
To start playback from stop mode,
press the PLAY button.

To stop playback, press STOP.
STOP

To pause playback
Press PAUSE/STEP during playback.
PAUSE/STEP

To resume normal playback, press the
PLAY button.

Selecting a track (file) in the disc
1 If a track list is not displayed, press the MENU button
to show it.
The current track being played is highlighted in red.
2 Press the / / / buttons to select a track you
want to play.
The selected track is highlighted in green.
3 Press the ENTER button to begin playback of the
selected track.

Notes
• Some discs may not permit this operation.
• If you stop playback by pressing the STOP button, and then
press the PLAY button, playback will start from the beginning
of the track.
• The SKIP 31 , REPEAT 35 and RANDOM 37 functions
are also available.

This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 files). Given the fact that technology in this area is
still maturing, Toshiba cannot guarantee that all genre of
recordable discs will produce optimal playback quality.
The technical criteria set out in this owner’s manual are
meant as a guide only.
Customers should also note that permission is required
in order to download MP3 files and music from the
internet. Toshiba has no right to grant such permission.
Permission should always be sought from the copyright
owner.

Advanced playback
Customizing the performance of your DVD player.

Accessing a Specific Location
Directly
Playing Repeatedly
Playing in a Favorite Order
Playing in Random Order
Zooming a Picture
Selecting the Sound
Enhancement (E.A.M.)
Selecting the Camera Angle
Selecting Subtitles
Selecting a Language

Advanced playback

Accessing a Specific Location Directly
You can access a specific location by entering its corresponding elapsed time
(hours, minutes, seconds).

3
3
1
2
DVD-V VCD
CD

Entering the elapsed time of the desired location

Press T several times.
SEARCH

You may have to press further
depending on the disc. Press the
button repeatedly until the clock icon
is highlighted.
e.g.

–:––:––

Press the number buttons to enter the
elapsed time.
e.g.

5
1

1:25:30

Press PLAY or ENTER.
PLAY

ENTER

Playback starts from the desired
location.

Notes
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you
specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or within
the current track of the VIDEO CD/audio CD.

Playing Repeatedly
You can play a specific title, chapter, track, or segment repeatedly.

/
PLAY
CLEAR
REPEAT
A-B RPT
DVD-V VCD
CD

Repeating a title, chapter, or track

Press REPEAT.

Press REPEAT or / repeatedly to
select the repeat playback mode.

REPEAT

If you select the repeat mode during
playback, the DVD player
automatically starts repeat playback
after finishing the current title,
chapter, or track.

The repeat mode menu appears.

The mode changes as follows (when
using the REPEAT button):
DVD-V
DVD-V
VCD CD

ENTER

DVD-V
VCD
CD

Advanced playback

Press PLAY.
PLAY

Chapter Repeat
Title Repeat
Track Repeat

The DVD player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.

To resume normal playback
All Repeat

Press CLEAR.
CLEAR

Repeat off
Chapter Repeat:
Track Repeat:
Title Repeat
All Repeat:
Repeat Off:

DVD-V VCD
CD

Repeats the current chapter.
Repeats the current track.
Repeats the current title.
Repeats the entire disc.
Resumes normal playback.

Note
Some discs may not permit repeat operation.

Repeating a specific segment

Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.

To resume normal playback
Press CLEAR.
CLEAR

A-B RPT
A–

Press A-B RPT again at the end of the
segment (point B).
A-B RPT

The DVD player automatically
returns to point A and starts repeat
playback of the selected segment
(A-B).

Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles 40 .
• You can specify a segment only within the current title.
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.

A–B Repeat

Advanced playback

Playing in a Favorite Order
You can combine your favorite titles, chapters, or tracks and play them in the
order you determine. You can program up to 30 selections into the memory.
(Memory playback)

/ / /
ENTER

3
CLEAR

2
1
DVD-V VCD
CD

Setting titles, chapters, or tracks in a favorite order

Insert a disc and press MEMORY during
stop.
MEMORY

The following display appears.
Memory List

T: Title number
CT: Chapter number
or track number

1
2
3
4
5
6
7

T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:---

Select the items in the order you want
by pressing the number buttons, then
ENTER for each item.
Each time you press the / buttons, the spaces
of “T” and “CT” are highlighted in turn. Highlight
where you want to enter, then press the
corresponding number buttons.
To select another chapter in the same title, you do
not need to select the title number.
To select tracks from a VIDEO CD/audio CD in
order, press the number buttons for the track,
then press the ENTER button for each selection
you want.

Press PLAY while the display appears
on the TV screen.
PLAY

The DVD player starts memory
playback.

To change the programmed selections
1 While the display appears on the TV screen, press
the / / / buttons to highlight the item you
want to change.
2 Change the selection following the instructions in
step 2.

To cancel the programmed selections
1 While the display appears on the TV screen, press
the / buttons to highlight the item you want to
cancel.
2 Press CLEAR.

To resume normal playback from memory
playback
Press CLEAR.
CLEAR

The memory playback indicator
disappears.

Notes
• Some discs may not permit memory playback operation.
• If you press the REPEAT button during memory playback,
the DVD player repeats the current memory playback.
• If you press the MEMORY or RETURN button while the
display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when:
– you turn off the DVD player.
– you open the disc tray.

Playing in Random Order
You can play titles, chapters, or tracks in random order.
(Random playback)

2
3
CLEAR

1, 2
DVD-V VCD
CD

Playing titles, chapters, or tracks in random order
To resume normal playback

Press RANDOM.

Press RANDOM or / repeatedly to
select the random playback mode.

RANDOM

Press CLEAR.

The random mode menu appears.

Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction
with the memory playback function.

ENTER

The mode changes as follows (when
using the RANDOM button):
DVD-V

Chapter Random

Plays the chapters
within the current title in
random order.

DVD-V

Title Random

VCD

Track Random

Plays titles in random
order.
Plays tracks in random
order.
Plays tracks in random
order.

Random Off

Resumes normal
playback.

If you select the random mode
during playback, the DVD player
automatically starts random
playback after finishing the current
title, chapter, or track.

Press PLAY.
PLAY

The DVD player starts random
playback.
Press the PLAY button within about
5 seconds after you press the
RANDOM button.

Advanced playback

RANDOM

CLEAR

Advanced playback

Zooming a Picture

ZOOM/ZOOM+/ZOOM–

You can magnify areas within a picture.

/ / /
ENTER

DVD-V VCD
CD

Zooming a picture

During normal, slow or still playback,
press ZOOM, ZOOM+ or ZOOM–.

Zoom point
To shift:

The DVD player enters the zoom
playback mode, and a monitor scope
and an icon appear.

ZOOM

Press the

buttons.

ENTER

e.g.

To hide the monitor scope and the icon during
zoom playback
Press

to select “EXIT,” and press ENTER.

ENTER

Select the zoom point and
magnification level.
Magnification level
• To use the fixed levels:
You can select from the following.
– Magnification
– Image reduction
– Normal playback
ZOOM

ENTER

To resume normal playback
Press ZOOM repeatedly until the monitor scope and the
icon disappear.
Alternatively press / / / to select “ZOOM” on the
icon, and press ENTER repeatedly until the monitor
scope and the icon disappear.

Press the ZOOM button
repeatedly.

Alternatively press the
/ / / buttons to select
“ZOOM” on the icon, and
press the ENTER button
repeatedly.

• To zoom in (or to zoom out):
Press repeatedly or press and
hold the ZOOM+ (or ZOOM–)
button.

Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as
described.
• Zooming does not work on subtitles or menus included on
DVD video discs.
• While the icon is displayed, the / / / /ENTER buttons
cannot work on menus included on DVD video discs. If you
want to view the menus, cancel the zoom playback.
• The magnification level varies depending on the picture size
you select. 58

Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.

ENTER

*E.A.M.: Enhanced Audio Mode

DVD-V VCD
CD

1, 2
2

Selecting the sound enhancement
To exit the audio enhancement selection

Press E.A.M.
E.A.M.

Press ENTER.

The sound enhancement menu
appears.
ENTER

Press E.A.M or / repeatedly to
select the sound enhancement.
E.A.M.

Normal:
Normal sound.

ENTER

3D:
To obtain expansive virtual surround
sound effects from just two
speakers.

Notes
• Actual effects to sounds may vary depending on the speaker
systems. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select “Normal”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting “Dialogue” disables “Dynamic Range Control”
function 59 .

Spatializer® 3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer® and the circle-in-square
device are trademarks owned by Desper Products, Inc.

Dialogue:
To control critical center channel
information to make dialogue more
intelligible (only when playing a DVD
video disc recorded on the Dolby
Digital recording system).
• To use this enhancement on
sounds output from the
BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack, be sure to set
“Digital Output” to “PCM”. 59

Advanced playback

Alternatively leave the DVD player unattended for about
5 seconds after having made a selection.

Advanced playback

Selecting the Camera Angle
If the scene was recorded from multiple angles, you can easily change
the camera angle of the scene you are watching.

CLEAR

1, 2

DVD-V VCD
CD

Changing the camera angle

Press ANGLE while playing a scene
recorded with multiple angles.
ANGLE

While playing a scene recorded with
multiple angles, the angle icon ( )
flashes in the DVD display.
Press the ANGLE button while the
angle icon is flashing.
e.g.

1
2
3

Press ANGLE or / while the angle
number is displayed on the TV screen.
ANGLE

Each time you press the ANGLE
button or the / buttons, the
camera angle changes.

ENTER

You can change the camera angle directly by
pressing the number buttons corresponding to its
angle number instead of using the / buttons.

To turn off the angle number display
Press CLEAR.
CLEAR

Notes
• You can change the camera angle during still playback. The
camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing a camera
angle, the resumed playback picture may not display the
new camera angle.

Selecting Subtitles
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video disc.

Good evening!

DVD-V VCD
CD

Bonsoir!

/ / /
ENTER

SUBTITLE

¡Buenas tardes!

Selecting a subtitle language

Press SUBTITLE during playback.
SUBTITLE

The current subtitle setting is
displayed.

To turn subtitles on or off
1 Press SUBTITLE during playback.
SUBTITLE

Off
ENG1
FRE1
SPA1
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 65

Press SUBTITLE or / while the
subtitle setting is displayed on the TV
screen.
SUBTITLE

Each time you press the SUBTITLE
button or the / buttons, the
subtitle languages included on the
DVD video disc change.

2 Press / while the subtitle setting is displayed on
the TV screen, to select “On” or “Off.”

ENTER

Notes
• Some DVD video discs are set to display subtitles
automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear
immediately after you select “On.”
• Some DVD video discs will allow you to make subtitle
selections and turn subtitles on or off only via the disc menu.

ENTER

To turn off the subtitle setting display, press the
ENTER button.

Notes
• When you turn on the DVD player or replace a disc, the player returns to the initial default setting 61 .
When you select a subtitle language which is not included on the disc, the DVD player plays a prior language programmed
on the disc.
• During some scenes, the subtitles may not appear immediately after you change the subtitle language.

Advanced playback

e.g.

Advanced playback

Selecting a Language
You can select a preferred language and sound recording system from those
included on the disc.

CLEAR

Good morning!

DVD-V VCD
CD

Bonjour!

¡Buenos días!

1, 2

Selecting a playback audio setting

Press AUDIO during playback.
AUDIO

The current audio setting is
displayed.

Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
AUDIO

e.g.

ENG1 PCM 2CH
ENG2
D 2CH
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 65

Press AUDIO or / while the audio
setting is displayed on the TV screen.
AUDIO

Each time you press the AUDIO
button or the / buttons, the audio
settings included on the disc
change.

ENTER

To turn off the audio setting display, press the
CLEAR button.

Notes
• When you turn on the DVD player or replace a disc, player
returns to the initial default setting 61 .
If you select a sound track which is not included on the disc,
the DVD player plays a prior sound track programmed on
the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.

Output sound conversion table
BITSTREAM/PCM jack
Output
Input

VIDEO CD

“Bitstream”

“PCM”

Dolby Digital

Bitstream

PCM

Linear PCM

PCM

DTS

Bitstream

MPEG1, MPEG2

Bitstream

PCM

MPEG1

PCM

Linear PCM 44.1 kHz/16 bit

PCM

DTS

Bitstream

MP3

PCM

ANALOG AUDIO
OUT Jacks

Advanced playback

DVD
video disc

“Digital Output” 56 59

Audio CD
Noise

: 3D sound enhancement can function.

• Signals of 96kHz from the BITSTREAM/PCM jack are depressed to 48 kHz by down sampling process when:
– “3D” is selected. 39
– “PCM Down Sampling” is set to “On.” 59
– a copyright protected disc is played.
• Quantization bit of signals of 20 bit or higher which is output from the BITSTREAM/PCM jack is 16 bit if they are in a
copyright protected disc.

Quick control
Simple use of a single button and the cursor control
enables you to direct your playback, without manipulating
many actual buttons.

Using the Virtual Remote
Control - V-REMOTE Selecting the Playback Function
- QUICK Accessing Features
- NAVI -

Quick control

Using the Virtual Remote Control
- V-REMOTE -

1
2

Pressing one button can display a graphics based on-screen remote control that
allows you to control playback as if you were doing it from the actual remote
control.

DVD-V VCD
CD

Using the virtual remote control

During playback, press V-REMOTE.
V-REMOTE

The graphic remote control (Virtual
Remote) appears.
For the meaning of each icon, see
right.

Icons and features
See the pages in

for details on the features.

Icon

Function

Page

Current title/track number

–

Current chapter number

–

Elapsed time of the current title/track

–

Audio setting

Subtitle setting

Angle setting

Reverse slow motion playback

Pause / Frame by frame playback

To begin slow motion playback

Playback starts from the beginning of
the current chapter or track.

Normal playback

To locate succeeding chapters or
tracks.

Fast reverse playback

To stop playback.

To turn off the Virtual Remote

Fast forward playback

Press V-REMOTE.

To turn off the Virtual Remote.

e.g. DVD-V
1

1:25:30

Press / / / to select the icon,
and press ENTER.

ENTER

V-REMOTE

* You can access a desired location. After step 2,
perform the steps below:
Note
Some discs may not permit this operation.

: steps 3 to 5 on 31

: steps 2 and 3 on

** After step 2, a sub menu will appear. Perform step 2
on the page in
.

Selecting the Playback Function - QUICK -

1
2-5

Pressing one button can display a list of playback functions which are relevant to
your current playback mode. You can check and modify them from the list.

DVD-V VCD
CD

Selecting the playback function

During playback, press QUICK.
The following on-screen display
appears.
(The actual display will vary
depending on the playback status.)

ICK
QU

Press ENTER.
ENTER

The on-screen display disappears
and playback will resume according
to your selection.

e.g. DVD-V

Quick menu

Press

to select a desired item.

Memory :
Repeat :
A-B (Set A) :

Random :

e.g. To change the repeat mode:
Bit Rate :
Quick
Memory
Repeat
A–B (Set A)
Random
Bit Rate
Text
Exit

ENTER

Text :

Press ENTER.
e.g. The mode menu appears.
Chapter Repeat
Title Repeat
All Repeat
Repeat Off

ENTER

Press

to change the setting.

Exit :

To program memory playback. 36
To select the repeat playback mode.
For the mode selections, see page 35 .
At the beginning of a segment you want
to repeat, press the ENTER button. Then
at the end of the segment, press the
ENTER button again. The segment is
played repeatedly. 35
To select the random playback mode.
For the mode selections, see page 37 .
To activate the bitrate display.
(Bit rate: data transfer rate (Mbit/s)
Refers to the amount of picture, sound
and subtitle data in the DVD video disc
transferred per second.
The larger the value, the more data
processed, but this does not necessarily
insure better picture quality.)
To activate the Text display.
Text display:
Displays DVD-Text data or CD-Text data
if included on the disc.
(Some content on the disc may not be
displayed properly depending on the
disc.)
To quit the on-screen display.

Note
Pressing the QUICK button again also exits the on-screen
display.

e.g. To select the title repeat
mode:
ENTER

Chapter Repeat
Title Repeat
All Repeat
Repeat Off

Quick control

Quick
Memory
Repeat
A–B (Set A)
Random
Bit Rate
Text
Exit

Quick control

Accessing Features - NAVI The NAVI menu provides an icon based display from which you can easily
access key playback function or setting.

DVD-V VCD
CD

1
2
3

NAVI menu items
To exit the NAVI menu

Press NAVI.
NA
VI

Press NAVI.

The NAVI menu appears.

NA
VI

e.g. DVD-V
Alternatively press / to remove the highlight from an
icon to the center position, and press ENTER.

ENTER

Exit

Press / /
feature icon.

to select a desired

For details on each feature, refer to
the list on the next page.
ENTER

Press ENTER.
Selection details appears.
ENTER

Refer to the list on the next page and
follow the instructions detailed on
subsequent pages.

Note
Depending on the disc, some features cannot be accessed.

Navi menu selections
You can divide a desired scene into stop action frames for careful
analysis.

SETUP

You can change the default settings to customize performance to
your preference.

PREVIEW

You can display thumbnail views of the first scenes of titles or
chapters and select a preferred one.

CAPTURE

You can sample a scene from a playback picture and transform it
into a background picture.

ANGLE
VIEWER

You can display all camera angles simultaneously and select a
preferred one from them.

PICTURE
SETTING

You can fine tune picture quality and store up to 3 custom picture
settings in the memory of the DVD player.

You can easily switch a preferred audio enhancement.

You can control key playback functions using the graphics based
on-screen remote control.

V-REMOTE

You can view information about a disc and its operational status on
the TV screen.

DISPLAY

CLOSED
CAPTION

You can display closed captions included on a DVD disc without
connecting a closed caption decoder to your TV.

Quick control

STROBE
VIEWER

E.A.M.

Quick control

Accessing Features - NAVI - (continued)

NAVI menu items
STROBE VIEWER
You can divide a desired scene into
stop action frames for careful
analysis.

PREVIEW

After selecting this icon and pressing ENTER, the
following on-screen display appears:

e.g.

Slow

Normal

Fast

Title

Strobe Viewer

1 Press

You can display thumbnail views of
the first scenes of titles or chapters
and select a preferred one.

to select.

ENTER

Slow: Still pictures at shorter intervals.
Normal: Still pictures at normal intervals.
Fast: Still pictures at longer intervals.
>>:
To view the next series of 6 pictures.
:
To quit the on-screen display.
2 Press ENTER.
ENTER

Chapter
<<

Preview

1 Press

Interval

to select.

ENTER

1 - 6:
To locate the scene.
Title:
To display the first scenes of titles (1 to 6).
Chapter: To display the first scenes of chapters
(1 to 6).
Interval: To display scenes at intervals of about 10
minutes apart.
<< :
To go to the previous page.
>> :
To go to the next page.
:
To quit the on-screen display.
2 Press ENTER.

Note
Some discs or scenes may not permit this operation.

ENTER

Notes
• Some discs or scenes may not permit this operation.
• Some items may not be selected depending on the
disc or scene.
• Some of the first scenes may not picked up depending
on the disc.

CAPTURE
You can sample a scene from a
playback picture and transform it into
a background picture.

ANGLE VIEWER
You can display all camera angles
simultaneously and select a
preferred one from them.

After selecting this icon and pressing ENTER, the
following on-screen display appears:

e.g.

Quick control

Capture
Storing
Exit

Angle Viewer

When the scene contains 9 camera angles:

1 Pause playback at a scene you want to capture.
2 Press

1 Press

to select.

to select.
ENTER

ENTER

1-9 : To select the camera angle.
: To quit the on-screen display.
Storing: To sample and store the current picture
in the player memory.
Exit:
To quit the on-screen display.
3 Press ENTER.

2 Press ENTER.
ENTER

ENTER

Note
Some discs or scenes may not permit this operation.

The stored picture will be displayed as a
background picture when the player is in the stop
mode. It is necessary to confirm this process via
the setup menu 62 .
Notes
• You can store only one picture. Storing a new picture
will erase the old one.
• No other operations are permitted while in the process
of sampling and storage of background picture.
• Some discs or scenes may not permit this operation.

Quick control

Accessing Features - NAVI - (continued)

NAVI menu items
PICTURE SETTING
You can fine tune picture quality and
store up to 3 custom picture settings
in the memory of the DVD player.
After selecting this icon and pressing ENTER, the
following on-screen display appears:

3 Press ENTER.
The sub menu appears.
4 Press
e.g.

to adjust the value, and press ENTER.
Color

e.g.
Contrast :
Brightness :
Color:
Tint :
DNR*1 :
Edge Enhance*2 :
All Reset :

1
2
3

1 Press

to select, and press ENTER.

*1: DNR: Digital Noise Reduction.
To view a picture with less video noise.
Notes
• Actual picture enhancement may vary depending
on the quality of the disc.
• While the DNR feature can provide additional
improvement in the reduction of noise in the video
signal, it may produce undesirable picture artifacts
on some discs.
• Depending on the disc, some kinds of picture
details may be lost by the picture enhancement.

ENTER

1, 2, 3: Select the desired custom memory
number. (Follow steps 2 to 4 below.)
2 Press

to select the element.

-7 (Lower) to +7 (Higher)
-7 (Darker) to +7 (Brighter)
-7 (Duller) to +7 (Brighter)
-7 (Redder) to +7 (Greener)
On / Off
On / Off
To restore all the elements to
the normal setting. A message
will appear. Follow the
procedure displayed on-screen.

*2: To enhance picture edges.

e.g. When you select “Color”:
Note
Picture Setting
0
Contrast
0
Brightness
Color
0
Tint
0
DNR
Off
Edge Enhance
Off
All Reset

The Tint adjustment is not available when connecting to a
TV via the component video jacks (Y, PB, PR).

Using the remote control to adjust the
brightness
Press BRIGHTNESS (+/-).
Each time you press the button, the brightness
changes.
Using the remote control to select the DNR
feature
Press DNR.
Each time you press the button, the feature turns
on or off.

DISPLAY
You can view information about a
disc and its operational status on the
TV screen.
After selecting this icon and pressing ENTER, the
following on-screen display appears:
e.g.

CLOSED CAPTION
You can display closed captions
included on a DVD disc without
CC
connecting a closed caption decoder
to your TV.
After selecting this icon and pressing ENTER, the
following on-screen display appears:

On
Off

Chapter : 23
Time : 1:23:45
Audio : ENG 1

Quick control

e.g.

Title : 1

D 2CH

Subtitle : ENG 1 On
Angle : 1/3
E.A.M. : Normal
Zoom : Off
Chapter repeat

To quit the on-screen display, press ENTER.

1 Press

Note

to select.

ENTER

Some discs or scenes may not permit this operation.

On : To display closed captions.
Off: To disable closed captions.
2 Press ENTER.
ENTER

Notes
• While you are using on-screen displays (including the
above one), you cannot view closed captions.
” may
• When “On” is selected, some displays such as “
be disabled.

Function Setup
You can change the default settings to customize
performance to your preference.

Customizing the Function
Settings
Table of Languages

Function setup

1, 6

Customizing the Function Settings
You can change the default settings to customize performance to your
preference.

2, 3, 4
RETURN

DVD-V VCD
CD

Setting procedure

Press SETUP during stop.
SETUP

The following on-screen display
appears.

Press / to select the setting you
want to change, then press ENTER.

AB C

ENTER

Picture
TV Shape
Progressive 4:3 Output
Progressive Conversion
Pause/Still

4:3 LB
Full
Auto
Auto

4
2

Press / to select a symbol for the
setting you want to change.

Change the selection by / or other
buttons, by referring to the
corresponding pages 58 , then press
ENTER.

(See the next page.)
ENTER

ENTER

Repeat steps 3 and 4 to change other
settings.
To select another operation, go back to step 2.

Picture performance settings

Output sound settings

AB C

Language settings

Press SETUP.
SETUP

The on-screen display disappears.

To return to the previous display
Press RETURN.

Display settings

RETURN

Operational settings

Initializing

Notes
• The on-screen display disappears also when you select “ ”
and press the ENTER button.
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.

Setting
TV Shape

DVD-V

Progressive 4:3 Output

DVD-V
VCD

Progressive Conversion

DVD-V

Pause/Still

PCM Down Sampling

Digital Output

AB C

Details

Page

To select a picture size according to the aspect
ratio of your TV.
To select the video output of pictures recorded
in 4:3 format. (Only when connected to a
PROGRESSIVE TV.)
To select the system of output signal. (Only
when connected to a PROGRESSIVE TV.)

DVD-V

To select the resolution of still pictures.
(Field/Frame)

DVD-V

To select a sound processing option according
to performance of the connected equipment.
(Only when the BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack is connected.)

To select an output sound format corresponding
to your system connection.
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late hours playback.
To turn on or off the vocal output during DVD
KARAOKE disc playback.

To select a preferred language for on-screen
displays.
To select a preferred language for disc menus.

To select a preferred language for the sound
track.
To select a preferred language for subtitles.

DVD-V VCD
CD

Dynamic Range Control

DVD-V

Karaoke Vocal

DVD-V

DVD-V VCD
CD

Disc Menu Language

DVD-V

Audio Language

DVD-V

Subtitle Language

DVD-V

On-Screen Displays

DVD-V VCD
CD

To turn on or de-activate the operational status
display on the TV screen.

Background

DVD-V VCD
CD

Screen Saver

DVD-V

To select the background color or background
picture.
To turn the screen saver on or off.

Parental Lock

DVD-V

To turn the parental lock function on or off.

To turn on or off the confirmation beeper
announcing when each remote command
received.

To turn on or off a feature that automatically stops
playback after a title has been viewed.
To use the menu screen when playing a PBCcontrollable VIDEO CD.
To select the playback priority between JPEG
(picture) files and MP3 (audio) files.

To restore all settings to the factory set.

Remote Confirmation

DVD-V VCD
CD

Title Stop

DVD-V

PBC

VCD

Priority Contents

Initialize

DVD-V VCD
CD

Function setup

On-Screen Language

64
64

Function setup

Customizing the Function Settings (continued)

Setting details
AB C

Picture
TV Shape
Progressive 4:3 Output
Progressive Conversion
Pause/Still

4:3 LB
Full
Auto
Auto

Progressive 4:3 Output

DVD-V VCD

Select the video output of pictures recorded in 4:3
format. (Only when connected to a PROGRESSIVE
TV.)
Full: Displays pictures expanded horizontally to fill
the 16:9 screen.

TV Shape
4:3 Letterbox:

4:3 Normal:

DVD-V
Select when a standard 4:3 TV is
connected.
Displays theatrical images with
masking bars above and below the
picture.
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill
your TV screen. Either or both
sides of the picture are cut off.

16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on the DVD video
disc. Therefore, the playback picture of some DVD
video discs may not conform to the picture size you
select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears
in the 4:3 picture size regardless of the TV shape
setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV
set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV
shape conforms to the actual TV in use.

4:3: Displays images in 4:3 aspect ratio with
masking bars to the left and right of the picture.
(Select this option when a connected TV cannot
select 4:3 picture size. However, subtitles or
menus may not work properly.)

Progressive Conversion

DVD-V

There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames
per second). Make this selection according to the
type of content being viewed.
Auto: Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source, and
converts that signal to the progressive output
format in an appropriate method.
Video: The DVD player filters video signal, and
converts it to the progressive output format
appropriately.
Suitable for playback of video content
pictures.
Film: The DVD player converts film content pictures
to the progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most
effective under this selection.
Note
Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video.”

Pause/Still
Auto:

DVD-V

For normal use. Still and fast motion images
can be paused.
Frame: The resolution of still pictures is improved,
so that you can make a motionless picture
more clearer when you pause it.

AB C

Audio
PCM Down Sampling
Digital Output
Dynamic Range Control
Karaoke Vocal

PCM Down Sampling

Off
Bitstream
On
Off

Digital Output

Bitstream:

Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder. 21 22
The DVD player outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.

PCM:

Select when connected to a 2 channel
digital stereo amplifier. 23
The DVD player outputs sounds in the
PCM 2ch format when you play a DVD
video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.

Off: Select when your connected receiver processes
high frequency signals of 96 kHz.
The DVD player outputs these signals as they
are on the disc.
On: Select when your connected receiver does not
process high frequency signals of 96 kHz.
The DVD player outputs these signals in a disc
depressing the frequencies to 48 kHz.
Notes
• Regardless of this setting, high frequency signals on a
DVD disc are down-converted to 48 kHz if that disc is
copy protected.
• If you select “Off” because your connected receiver
does not process high frequency signals of 96 kHz, you
will not hear output sound from those signals.

Function setup

According to performance of your connected receiver,
select a sound processing option for playback of a
disc that contains high frequency signals (sampling
frequency 96 kHz).

Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see 43 .

DVD-V

Make this selection only when you use your audio
equipment (e.g. receiver) connecting to the DVD
player via the BITSTREAM/PCM (DIGITAL) AUDIO
OUT jack.

DVD-V VCD

Note
When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select “Bitstream” or “PCM.”

Dynamic Range Control

DVD-V

Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD disc.

Function setup

Customizing the Function Settings (continued)

Setting details
Karaoke Vocal

DVD-V

Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD player.

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language – – –

On-Screen Language

DVD-V VCD

English: To view on-screen displays in English.
Français: To view on-screen displays in French.
Español: To view on-screen displays in Spanish.

Disc Menu Language
English:
French:
Spanish:
Others:

DVD-V

To display disc menus in English.
To display disc menus in French.
To display disc menus in Spanish.
To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.

1) Obtain the abbreviation of the preferred
language from the list 65 .
2) Select the first character by pressing the /
buttons.
3) Press the / buttons to shift and select the
second character by pressing the / buttons.
AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language – – –

English
French
Spanish
Others
Code E S

4) Press the ENTER button.
Note
Some DVD video discs may not include your preselected language. In this case, the DVD player
automatically displays disc menus consistent with the
disc’s initial language setting.

Audio Language
English:
French:
Spanish:
Others:

3) Press the / buttons to shift and select the
second character by pressing the / buttons.

DVD-V

To play sound tracks in English.
To play sound tracks in French.
To play sound tracks in Spanish.
To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.

English
French
Spanish
Others

English
French
Spanish
No Subtitle
Others
Code A A

4) Press the ENTER button.
Notes
• Some DVD video discs may be set to display subtitles
in a different language than you selected. A prior
subtitle language may be programmed on the disc.
• Some DVD video discs allow you to change subtitle
selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate
subtitle language from the selection on the disc menu.

Function setup

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language – – –

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language – – –

Code E S

4) Press the ENTER button.
Note
Some DVD video discs may be played in a different
language than you selected. A prior language may be
programmed on the disc.

Subtitle Language
English:
French:
Spanish:
No Subtitle:
Others:

DVD-V

To display subtitles in English.
To display subtitles in French.
To display subtitles in Spanish.
To disable subtitles.
To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.

1) Obtain the abbreviation of the preferred
language from the list 65 .
2) Select the first character by pressing the
buttons.

Function setup

Customizing the Function Settings (continued)

Setting details
AB C

AB C

Display
On-Screen Displays On
Background
Gray
Screen Saver
On

Operation
Parental Lock
Off
Remote Confirmation On
Title Stop
Off
PBC
On
Priority Contents
JPG

On-Screen Displays

DVD-V VCD

Off: Operational modes (e.g. “
displayed.
On: Operational modes (e.g. “
displayed on-screen.

Background

DVD-V VCD

Parental Lock

”, “

”) are not

”, “

”) are

Blue:
Blue background.
Gray:
Gray background.
Capture: To use a picture you sampled and stored in
the memory using the Capture feature 51
as a background.
Jacket: To use the jacket picture included on some
discs as a background. If it is not included,
a gray background will be substituted.

Screen Saver

DVD-V

Off: The screen saver is disengaged.
On: The screen saver operates.

DVD-V

DVD video discs equipped with the parental lock
function are rated according to their content. The
contents allowed by a parental lock level and the way
a DVD video disc can be controlled may vary from
disc to disc. For example, if the disc allowed you
could edit out violent scenes unsuitable for children
and replace them with more suitable scenes, or lock
out playback of the disc altogether.
• DVD video discs may or may not respond to the
parental lock settings. This is not a defect in the DVD
player. Make sure this function works with your DVD
video discs.

Off: The parental lock feature does not function.
After pressing the ENTER button, follow step 1)
below.
On: To activate the parental lock feature or change
the settings.
After pressing the ENTER button, follow steps
1) - 3) below.

Parental Lock
Security Code – – – –

> MP3

1) Press the number buttons to create a personal
4-digit security code, then press the ENTER
button.
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.

3) Press the / buttons to select the parental
lock level, then press the ENTER button.

Parental Lock
US
Area Code
7
Level

2) Enter the code of a country/area whose
standards were used to rate the DVD video
disc, referring to the list below.
Code
AU
BE
CA
CN
HK
DK
FI
FR
DE
ID
IT
JP
MY
NL
NO
PH
RU
SG
ES
SE
CH
TW
TH
GB
US

a) Select the first character by pressing the
/ buttons.
b) Press the / buttons to shift and select
the second character by pressing the /
buttons.
c) Press the ENTER button.

You cannot play DVD video discs rated higher than
the level you selected unless you cancel the parental
lock function.
For example, when you select level 7, discs rated
higher than level 7 are locked out and cannot be
played.
The parental lock level is equivalent to the following
USA movie ratings.
Level 7: NC-17
Level 6: R
Level 4: PG 13
Level 3: PG
Level 1: G

Function setup

Country/Area
AUSTRALIA
BELGIUM
CANADA
CHINA
CHINA HONG KONG
DENMARK
FINLAND
FRANCE
GERMANY
INDONESIA
ITALY
JAPAN
MALAYSIA
NETHERLANDS
NORWAY
PHILIPPINES
RUSSIAN FEDERATION
SINGAPORE
SPAIN
SWEDEN
SWITZERLAND
TAIWAN
THAILAND
UNITED KINGDOM
UNITED STATES

The parental lock levels for other countries/areas
than U.S. are included for future use. Check the
appropriate parental lock level when you buy a DVD
video disc equipped with the parental lock feature in
the future.

To change the parental lock level
Follow steps 1) - 3).
To change your 4-digit security code
1) After selecting “On” or “Off,” press the STOP
button four times, then press the ENTER
button.
STOP

STOP

ENTER

The 4-digit security code is cleared.
2) Press the number buttons to create a new
4-digit security code.
3) Press the ENTER button.

Note
After making the “Parental Lock” setting, the on-screen
display will disappear. To make other settings, press the
SETUP button again to display them.

Function setup

Customizing the Function Settings (continued)

Setting details
Remote Confirmation

DVD-V VCD

AB C

Initialize
All settings will be restored to pre-set
levels.

Off: The beeper does not sound.
On: The beeper sounds with each remote operation.

Title Stop

Exit
Yes

DVD-V

Off: The DVD player continues after playback of a
title is completed.
On: The DVD player stops after playback of a title is
completed.

Initialize

DVD-V VCD

To restore all settings to the factory set.

PBC

VCD

Off: When playing a VIDEO CD without using the
menu.
On: To use the menu when playing a PBC-featured
VIDEO CD.

1) Press the / buttons to select “Yes,” and
press the ENTER button.

ENTER

Priority Contents
To select the playback priority between JPEG (picture)
files and MP3 (audio) files.
JPG

MP3

MP3 : JPEG files take priority over MP3
files.
JPG : MP3 files take priority over JPEG
files.

2) Read the message, and if you really want to
restore all settings, press the / buttons to
select “Yes,” and press the ENTER button.

ENTER

Refer to the separate booklet “Digital Photo Viewer”
on how to play a disc containing JPEG format files.

The message of completion appears.

Note
The “Parental Lock” setting is not restored to the factory
set.

Table of Languages

Table of languages and their abbreviations
Abbreviation

–––

No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician

Abbreviation

GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS

Language

Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto

Abbreviation

PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU

Language

Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu

Function setup

CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL

Language

Others
Before Calling Service
Personnel
Specifications
LIMITED WARRANTY DVD
PLAYER

Others

Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.

Symptoms and correction
Symptom

Cause

Correction

No power.

• The power plug is disconnected.

• Connect the power plug securely into the
wall outlet.

The DVD player turned off by
itself.

• The automatic power off function turned
the unit off.

• Press the PLAY button.

No picture.

• The TV is not set to receive DVD signal
output.

• Select the appropriate video input mode
on the TV so the picture from the DVD
player appears on the TV screen.

• The video cable is not connected securely.

• Connect the video cable securely into the
appropriate jacks.

• The equipment connected with the audio
cable is not set to receive DVD signal
output.

• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.

• The audio cable is not connected securely.

• Connect the audio cable securely into
the appropriate jacks.

18-23

• The audio receiver or TV is turned off.

• Turn on the equipment connected with
the audio cable.

• The setting of output sound format is
incorrect.

• Select the proper audio setting.

The playback picture has
occasional distortion.

• The disc is dirty.

• Eject the disc and clean it.

• It is in fast forward or fast reverse
playback.

• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.

–

Brightness is unstable or
noises are present in the
playback pictures.

• The effect of copy protection.

• Connect the DVD player directly to the
TV. Avoid connecting the DVD player to
a VCR or TV/VCR combination.

The DVD player does not
start playback.

• No disc is inserted.

• Insert a disc.

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc
type.)

• The disc is placed upside down.

• Place the disc with the playback side
down.

• The disc is not placed within the guide.

• Place the disc correctly inside the guide
on the disc tray.

• The disc is dirty.

• Clean the disc.

• The parental lock function is set.

• Cancel the parental lock function or
change the parental lock level.

Playback does not follow the
course of the disc’s program.

• It is in the mode of repeat playback,
memory playback, etc.

• These operations may prevent a proper
progress of the contents.

–

Buttons do not work.

• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.

• Press and hold the ON/STANDBY button
on the front panel for more than about 3
seconds. The DVD player turns off.
Press the button again to turn it on. If the
buttons still do not work, disconnect the
power plug and insert it into the wall
outlet again.

–

The remote control does not
work properly.

• The remote control is not pointed at the
remote sensor of the DVD player.

• Point the remote control at the remote
sensor of the DVD player.

• The remote control is too far from the DVD
player.

• Operate the remote control within about
7 m.

• The batteries in the remote control are
exhausted.

• Replace the batteries with new ones.

No sound.

Page

18, 19

42, 56
59

9
56, 62

Others

LIMITED WARRANTY DVD PLAYER
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift
from the original purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty
TACP/THI warrant this product against defects in materials
or workmanship for a period of ninety (90) days after the
date of original retail purchase. During this period, TACP/
THI will repair or replace a defective product or part, at their
option, with a new or refurbished product or part without
charge to you. You must deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this
period, TACP/THI will repair or replace a defective product
or part, at their option, with a new or refurbished product or
part without charge to you, except that if a defective part is
replaced after ninety (90) days from the date of the original
retail purchase you pay labor charges involved in the
replacement. You must also deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Rental Units
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.

Commercial Units
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before
operating this product. You should complete and mail the
enclosed Demographic card within ten (10) days after you,
or the person who has given you this product as a gift,
purchased this product. This is one way to enable TACP to
provide you with better customer service and improved
products. Failure to return the card will not affect your rights
under this warranty.
Your Responsibility
The above warranties are subject to the following
conditions:
(1) You must retain your bill of sale or provide other proof of
purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a
defective product or part.
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is
purchased and operated in the Continental U.S.A. or
Puerto Rico.
(5) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
(6) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by
you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such
as lighting or fluctuations in electric power, improper
installation, improper maintenance or use in violation of
instructions furnished by us; or to units which have
been altered or modified without authorization of TACP/
THI/TCL or to damage to products or part thereof which
have had the serial number removed, altered, defaced
or rendered illegible.
(7) Should you elect to return your DVD Unit to TACP after
the ninety (90) days and within one (1) year, or after the
warranty period has expired: Call (800)-631-3811 to
receive information concerning an exchange price.
Payment must be enclosed with product in the form of a
certified check or money order including reason for
return.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and
will be returned as received.

How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30)
days after you find a defective product or part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.
Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original
shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be
enclosed.
In the Continental United States contact:

Toll Free
800-631-3811

In Hawaii contact:
Toshiba Hawaii Inc.
327 Kamakee Street
Honolulu, HA 96814
(808)-521-5377

In Canada contact:
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400

Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500

Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 1J1
(514)-856-4100

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state
law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and
similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI
be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in
any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising
under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days
from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or
limitation of incidental or consequential damages, so the above provisions may not apply to you.

Others

ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward
this completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product
must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not
covered by these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.

Printed in China

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:05:28 13:54:44Z
Modify Date                     : 2002:11:04 10:54:57-06:00
Page Count                      : 66
Has XFA                         : No
Creation Date                   : 2002:05:28 13:54:44Z
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Mod Date                        : 2002:11:04 10:54:57-06:00
Metadata Date                   : 2002:11:04 10:54:57-06:00
Page Mode                       : UseOutlines
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

Toshiba Sd 3800 Owners Manual

Navigation menu

Versions of this User Manual:

Views

Navigation