Toshiba Security Camera Mk5002Mal Users Manual May 10, 2000
MK5002MAL to the manual 3236f53f-bc9a-440e-ba70-1b909e3a3dc5
2014-12-13
: Toshiba Toshiba-Security-Camera-Mk5002Mal-Users-Manual-131698 toshiba-security-camera-mk5002mal-users-manual-131698 toshiba pdf
Open the PDF directly: View PDF .
Page Count: 9
Download | |
Open PDF In Browser | View PDF |
TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK5002MAL (HDD1242) 1.8-INCH HARD DISK DRIVE USER MANUAL Rev 02 11/2006 CONTENTS Introduction..............................................................................1 Setup ........................................................................................2 Using the HDD .........................................................................3 Specifications ..........................................................................4 Drive Connectors.....................................................................6 INTRODUCTION – MK5002MAL (HDD1242) General Features • 1.8" sized drive • 1 Platter • 5.007 Gigabytes* • 5mm High • 15ms Average Seek Time • ATA (1 - 5) Interface • Ultra 66 DMA Suppoted • 1024KB Buffer • Rotational speed of 4,200rpm • MTTF 300,000 Hours *Toshiba defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes. 1 SETUP – MK5002MAL (HDD1242) Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive. Figure 1. MK5002MAL Side View Installation Notes • Do not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N. important Note: Disconnect power from your computer system before beginning installation 2 USING THE HARD DISK DRIVE – MK5002MAL (HDD1242) Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk drive. 3 SPECIFICATIONS –MK5002MAL (HDD1242) General Model Interface MK5002MAL (HDD1242) ATA-1/2/3/4/5 Functionality Formatted Capacity 5.007GB* Rotational Speed 4200rpm Avg. Rotational Latency 7.14/ms Spin-up Time 3.5sec (typical) Buffer 1024KB Seek Time Average 15 Maximum 26 Internal Transfer Rate 118 ~ 175.3 Mbits/sec (max) Host Transfer Rate Ultra DMA mode 66.7Mbytes/sec PIO Mode 16.6Mbytes/sec Interleave Factor 1:1 *Toshiba defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes. Internal Drive Characteristics Number of Disks Number of Data Heads Track Density (TPI) Logical Cylinders Logical Heads Logical Sectors/track Bytes per Sector Logical Blocks (LBA) 1 2 1638 (41.6k) 10,350 16 63 512 9,780,750 Reliability Preventative maintenance Non-recoverable read errors None 1 error per 1013 bits read Electrical Voltage 5V ±5% Power Consumption Start Seek Read/Write Sleep Energy Consumption Efficiency 4 1.2W typ 1.3W typ 1.3W typ 0.05W typ 0.10W/GB avg Shock Operating Non-Operating 1,960m/s2 (200G)(2msec) 9,800m/s2 (1000G)(1msec) Physical Height Width Depth Weight 0.2" (5.0mm) 2.13" (54.0mm) 3.09" (78.5mm) 1.94oz (55g) typ Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) 1950 Canadian Standard Association (CSA) C22.2 No. 950 TUV Rheinland EN 60 950 EMC - EN50081-1 EN50081-1: 1992 EN55022: 1994 Class B EN61000-3-2: 1995 EN61000-3-3: 1995 EMC - EN50082-1 EN61000-4-2: 1995 EN61000-4-3: 1998 ENV50204: 1995 EN61000-4-4: 1995 EN61000-4-5: 1995 EN61000-4-6: 1996 EN61000-4-11: 1994 5 DRIVE CONNECTORS –MK5002MAL (HDD1242) Figure 1. MK5002MAL HDD - INTERFACE CONNECTOR Interface Connector Drive Side Connector Recommended Host Side Connector 6 MCD-D50 Series by DDK Connectors MCD-D50 Series by DDK Connectors Interface Signals DRIVE INTERFACE SIGNALS PIN SIGNAL PIN SIGNAL 1 RESET 2 GROUND 3 DD 7 4 DD 8 5 DD 6 6 DD 9 7 DD 5 8 DD 10 9 DD 4 10 DD 11 11 DD 3 12 DD 12 13 DD 2 14 DD 13 15 DD 1 16 DD 14 17 DD 0 18 DD 15 19 GROUND 20 OPEN 21 DMARQ 22 GROUND 23 DIOW/STOP 24 GROUND 25 DIOR/ -DMARDY HSTROBE 26 GROUND 27 IORDY/ -DMARDY/DSTROBE 28 CSEL 29 DMACK 30 GROUND 31 INTRQ 32 IOCS16 33 DA1 34 PDIAG 35 DA0 36 DA 2 37 CS0 38 CS1 39 DASP 40 GROUND 41 3.3V (LOGIC) 42 3.3V (MOTOR) 43 GROUND 44 RESERVED Note: Symbol () in front of signal indicates negative logic. 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Tag Email Subject : SDD press releases for CES - Jan. 06. 2005 Tag Author Email Display Name : Sims, David Tag Author Email : dsims@golinharris.com Tag Ad Hoc Review Cycle ID : 669882224 Company : TOSHIBA Source Modified : D:20061115185216 Create Date : 2006:11:15 10:52:25-08:00 Creator Tool : Acrobat PDFMaker 7.0.7 for Word Modify Date : 2006:11:15 10:52:37-08:00 Metadata Date : 2006:11:15 10:52:37-08:00 Document ID : uuid:7f15175f-5152-4320-a2f8-9d761fe31a6c Instance ID : uuid:d3e20d82-6160-4c03-90bf-aaaf226229f4 Version ID : 4 Format : application/pdf Title : May 10, 2000 Creator : lmimbs Subject : Headline : Page Count : 9 Page Layout : OneColumn Author : lmimbsEXIF Metadata provided by EXIF.tools