Toshiba Te2300 Users Manual EN

TE2300 SATELLITE PRO TE2300 UserMan

2014-12-13

: Toshiba Toshiba-Te2300-Users-Manual-129924 toshiba-te2300-users-manual-129924 toshiba pdf

Open the PDF directly: View PDF PDF.
Page Count: 189 [warning: Documents this large are best viewed by clicking the View PDF Link!]

TOSHIBA TE2300 TOSHIBA TE2300 TOSHIBA TE2300 TOSHIBA TE2300TOSHIBA TE2300
TOSHIBA
TE2300
TE 2300
Choose freedom.
computers.toshiba-europe.com
Choose freedom.
computers.toshiba-europe.com
160 bis 200 Seiten
TOSHIBA TE2300TOSHIBA TE2300
*T201929-FR*
T201929-FR
Manuel de l’utilisateur
User's Manual
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
ii
TOSHIBA TE2300
Copyright
© 2003 by TOSHIBA Corporation. All rights reserved. Under the copyright
laws, this manual cannot be reproduced in any form without the prior
written permission of TOSHIBA. No patent liability is assumed, with
respect to the use of the information contained herein.
TOSHIBA TE2300 Portable Personal Computer User’s Manual
First edition May 2003
Copyright authority for music, movies, computer programs, data bases
and other intellectual property covered by copyright laws belongs to the
author or to the copyright owner. Copyrighted material can be reproduced
only for personal use or use within the home. Any other use beyond that
stipulated above (including conversion to digital format, alteration,
transfer of copied material and distribution on a network) without the
permission of the copyright owner is a violation of copyright or author’s
rights and is subject to civil damages or criminal action. Please comply
with copyright laws in making any reproduction from this manual.
Disclaimer
This manual has been validated and reviewed for accuracy. The
instructions and descriptions it contains are accurate for the TOSHIBA
TE2300 Portable Personal Computer at the time of this manual’s
production. However, succeeding computers and manuals are subject to
change without notice. TOSHIBA assumes no liability for damages
incurred directly or indirectly from errors, omissions or discrepancies
between the computer and the manual.
Trademarks
IBM is a registered trademark, and IBM PC and PS/2 are trademarks of
International Business Machines Corporation.
Intel, Intel SpeedStep and Pentium are trademarks or registered
trademarks of Intel Corporation.
Windows and Microsoft are registered trademarks of Microsoft
Corporation.
Photo CD is a trademark of Eastman Kodak.
CompactFlash is a trademark of SunDisk Corporation.
Other trademarks and registered trademarks not listed above may be
used in this manual.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
iii
TOSHIBA TE2300
EU Declaration of Conformity
This product is carrying the CE-Mark in accordance with the related
European Directives. Responsible for CE-Marking is TOSHIBA Europe
GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
i
v
TOSHIBA TE2300
Modem warning notice
Conformity Statement
The equipment has been approved to [Commission Decision “CTR21”] for
pan-European single terminal connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in
the first instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the
following networks. It has been tested to and found to conform with the
additional requirements conditional in EG 201 121.
Germany ATAAB AN005,AN006,AN007,AN009,AN010
and DE03,04,05,08,09,12,14,17
Greece ATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and
P03,04,08,10
Spain ATAAB AN005,007,012, and ES01
Switzerland ATAAB AN002
All other countries/regions ATAAB AN003,004
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that
specific function on specific national networks can be given.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
v
TOSHIBA TE2300
General Precautions
TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury, damage to the
computer or impaired performance.
Be certain to read the general precautions below and to note the cautions
included in the text of the manual. Please also refer to the Safety
Instruction Manual.
Stress injury
Carefully read the Safety Instruction Manual. It contains information on
prevention of stress injuries to your hands and wrists that can be caused
by extensive keyboard use. Chapter 3, Getting Started, also includes
information on work space design, posture and lighting that can help
reduce physical stress.
Heat Warning
■ Avoid prolonged physical contact with the computer. If the computer
is used for long periods, its surface can become very warm. While the
temperature will not feel hot to the touch, if you maintain physical
contact with the computer for a long time (if you rest the computer on
your lap, or if you keep your hands on the palm rest, for example) your
skin might suffer low-heat injury.
■ If the computer has been used for a long time, avoid direct contact
with the metal plate supporting the I/O ports. It can become hot.
■ The surface of the AC adaptor can become hot when in use. This
condition does not indicate a malfunction. If you need to transport the
AC adaptor, disconnect it and let it cool before moving it.
■ Do not lay the AC adaptor on a material that is sensitive to heat. The
material could be damaged.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to strong
impact. Excessive pressure or impact can cause damage to computer
components or otherwise cause malfunctions.
PC card overheating
Some PC cards can become hot with prolonged use. Overheating of a PC
card can result in errors or instability in the PC card operation. Also be
careful when you remove a PC card that has been used for a long time.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
vi
TOSHIBA TE2300
Mobile phone
Use of mobile phones can interfere with the audio system. Computer
operation is not impaired but it is recommended that a distance of 30 cm
be maintained between the computer and a mobile phone in use.
Central Processing Unit (CPU) Performance Disclaimer
CPU performance in your computer product may vary from specifications
under the following conditions:
■ Use of certain peripheral products
■ Use of battery power instead of AC power
■ Use of certain multimedia games or videos with special effects
■ Use of standard telephone lines or low speed network connections
■ Use of complex modelling software, such as high end computer aided
design applications
■ Use of the computer in areas with low air pressure (high altitude >
1,000 meters or > 3,280 feet above sea level)
■ Use of the computer at temperatures outside the range of 5°C to 35°C
(41°F to 95°F) or > 25°C (77°F) at high altitude (all temperature
references are approximate).
CPU performance may also vary from specifications due to design
configuration.
Under some conditions, your computer product may automatically shut
down. This is a normal protective feature designed to reduce the risk of
lost data or damage to the product when used outside recommended
conditions. To avoid risk of lost data, always make back-up copies of
data by periodically storing it on an external storage medium. For
optimum performance, use your computer product only under
recommended conditions. Read additional restrictions under
Environmental requirements in Appendix A, Specifications. Contact
TOSHIBA Technical Service and Support for more information.
CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
TOSHIBA should not guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected
or implemented. In this case the persons who have connected /
implemented those options / cables have to assure that the system
(PC plus options / cables) still fulfils the required standards. To avoid in
general EMC problems following advice should be observed:
Only CE marked options should be connected / implemented
Only best shielded cables should be connected
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
vii
TOSHIBA TE2300
Working environment
This product was designed to fulfil the EMC (electromagnetic
compatibility) requirements to be observed for so-called "Residential,
commercial and light industry environments".
TOSHIBA do not approve the use of this product in working environments
other than the above mentioned "Residential, commercial and light
industry environments".
For example, the following environments are not approved:
■ Industrial Environments (environments with a mains voltage >230V~)
■ Medical Environments
■ Automotive Environments
■ Aircraft Environments
If this product is supplied with a network port, please refer to the
paragraph "Network connection".
Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA
Europe GmbH.
The consequences of the use of this product in non-approved working
environments may be:
■ Interference with other devices or machines in the near surrounding
area
■ Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area
Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft,
the manufacturer or airline respectively should be asked for permission
before use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
viii
TOSHIBA TE2300
Network connection (class A warning)
If this product has networking capabilities and will be connected to a
network, Class A radiation limits will be observed (in accordance with
technical conventions). This means that if the product will be used in a
domestic environment, other devices in the near surrounding may suffer
interference. Consequently, please do not use this product in such
environments (for example a living room), otherwise you could be held
responsible for any ensuing interference.
Information on the secure use of the CD-RW
Please adhere to the following information on the use of the CD-RW to
minimise the risk of unsuccessful storing process. As the storing may be
unsuccessful despite your adhering to these information, for example
because of a defective storing medium, you should even if the software
indicates a successful storage, always check if the data has been stored
successfully.
Optical disc drive standards
TOSHIBA TE2300 series computer is shipped with one of the following
drives preinstalled : DVD-ROM, CD-RW/DVD-ROM, or DVD Multi drive.
The drive has one of the following labels :
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE1
KLASS 1 LASER APPARAT
Before it is shipped, the Class 1 Laser is certified to meet the United
States Chapter 21 Standards of the Department of Health and Human
Services (DHHS 21 CFR).
For any other country, the drive is certified to meet the Class 1 Laser standards of IEC82
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
User’s Manual
i
TOSHIBA TE2300
1.
Table of Contents
General Precautions
Preface
Manual contents ........................................................................... xii
Conventions..................................................................................xiii
Chapter 1: Introduction
Equipment checklist.....................................................................1-1
Features .......................................................................................1-2
Special features ...........................................................................1-7
Utilities .........................................................................................1-9
Options ......................................................................................1-10
Chapter 2: The Grand Tour
Front with the display closed .......................................................2-1
Left side .......................................................................................2-2
Right side.....................................................................................2-3
Back side .....................................................................................2-3
Underside.....................................................................................2-5
Front with the display open..........................................................2-7
System Indicators ........................................................................2-9
USB diskette drive .....................................................................2-11
Slim Select Bay modules ...........................................................2-11
AC adaptor.................................................................................2-17
TOSHIBA TE2300
User’s Manual ix
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Table of Contents
x
TOSHIBA TE2300
Chapter 3: Getting Started
Setting up your work space .........................................................3-1
Connecting the AC adaptor .........................................................3-4
Opening the display .....................................................................3-6
Turning on the power ...................................................................3-6
Starting up for the first time .........................................................3-7
Turning off the power ...................................................................3-7
Restarting the computer ............................................................3-10
Restoring the preinstalled software from the Product
Recovery CD-ROM ....................................................................3-10
Chapter 4: Operating Basics
Using AccuPoint II........................................................................4-1
Using the USB diskette drive.......................................................4-2
Changing Slim Select Bay modules.............................................4-3
Using optical media drives...........................................................4-5
Writing CDs on CD-RW/DVD-ROM drive...................................4-10
Writing CD/DVDs on DVD Multi drive.........................................4-12
Media care .................................................................................4-17
Modem.......................................................................................4-18
Wireless communications ..........................................................4-20
LAN ............................................................................................4-22
Cleaning the computer...............................................................4-24
Moving the computer.................................................................4-24
Heat dispersal ............................................................................4-24
Chapter 5: The Keyboard
Typewriter keys ............................................................................5-1
F1 … F12 function keys ...............................................................5-1
Soft keys: Fn key combinations...................................................5-2
Windows special keys..................................................................5-6
Keypad overlay ............................................................................5-6
Generating ASCII characters .......................................................5-8
Chapter 6: Power and Power-Up Modes
Power conditions .........................................................................6-1
Power indicators ..........................................................................6-3
Battery types................................................................................6-4
Care and use of the battery pack.................................................6-6
Replacing the battery pack ........................................................6-12
Starting the computer by password...........................................6-13
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Table of Contents
xi
TOSHIBA TE2300
Chapter 7: HW Setup and Passwords
HW Setup.....................................................................................7-1
Chapter 8: Optional Devices
PC cards ......................................................................................8-2
Memory expansion ......................................................................8-3
Additional battery pack (Black) ....................................................8-6
Slim Select Bay 2nd battery pack................................................8-6
Additional AC adaptor..................................................................8-6
Slim Select Bay HDD adaptor (Black) ..........................................8-6
USB FDD Kit ................................................................................8-8
Advanced Port Replicator II .........................................................8-8
Parallel printer..............................................................................8-9
External monitor.........................................................................8-10
Television ...................................................................................8-11
PS/2 mouse ...............................................................................8-11
PS/2 keyboard ...........................................................................8-12
Security lock ..............................................................................8-12
Chapter 9: Troubleshooting
Problem solving process..............................................................9-1
Hardware and system checklist ...................................................9-3
Appendix A: Specifications
Appendix B: AC Power Cord and Connectors
Appendix C: The Toshiba International Warranty
Appendix D: Keyboard Layouts
Appendix E: Display Controller and Modes
Appendix F: If your computer is stolen
Appendix G: Internal Modem Guide
Appendix H: ASCII Character Codes
Appendix I: Wireless LAN
Glossary
Index
TOSHIBA support ......................................................................9-18
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Table of Contents
xii
TOSHIBA TE2300
2.
Preface
Congratulations on your purchase of the TOSHIBA TE2300 series
computer. This powerful, lightweight notebook computer is designed to
provide years of reliable, high-performance computing.
This manual tells how to set up and begin using your TE2300 computer.
It also provides detailed information on configuring your computer, basic
operations and care, using optional devices and troubleshooting.
If you are a new user of computers or if you’re new to portable
computing, first read over the Introduction and The Grand Tour chapters
to familiarize yourself with the computer’s features, components and
accessory devices. Then read Getting Started for step-by-step
instructions on setting up your computer.
If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted
with this manual by browsing through its pages. Be sure to look over the
Special features section of the Introduction, to learn about features that
are uncommon or unique to the computers and carefully read HW Setup
and Passwords. If you are going to install PC cards or connect external
devices such as a printer, be sure to read Chapter 8, Optional Devices.
TOSHIBA TE2300
User’s Manual xii
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Preface
xiii
TOSHIBA TE2300
Manual contents
This manual is composed of nine chapters, nine appendixes, a glossary,
and an index.
Chapter 1, Introduction, is an overview of the computer’s features,
capabilities, and options.
Chapter 2, The Grand Tour, identifies the components of the computer
and briefly explains how they function.
Chapter 3, Getting Started, provides a quick overview of how to begin
operating your computer and gives tips on safety and designing your
work area.
Chapter 4, Operating Basics, includes tips on care of the computer and
on using the AccuPoint II, Slim Select Bay modules, optical media drive,
external diskette drive, Wireless LAN, LAN and internal modem.
Chapter 5, The Keyboard, describes special keyboard functions including
the keypad overlay and hotkeys.
Chapter 6, Power and Power-Up Modes, gives details on the computer’s
power resources and battery save modes.
Chapter 7, HW Setup and Passwords, explains how to configure the
computer using the HW Setup program. It also tells how to set a
password.
Chapter 8, Optional Devices, describes the optional hardware available.
Chapter 9, Troubleshooting, suggests courses of action if the computer
doesn’t seem to be working properly.
The Appendixes provide technical information about your computer.
The Glossary defines general computer terminology and includes a list of
acronyms used in the text.
The Index quickly directs you to the information contained in this manual.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Preface
xi
v
TOSHIBA TE2300
Conventions
This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.
Abbreviations
On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read
Only Memory (ROM). Acronyms are also defined in the Glossary.
Icons
Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing
information on.
Keys
The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the kejy top symbols as they
appear on the keyboard. For example, Enter identifies the Enter key.
Key operation
Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, Ctrl + C means you must hold down Ctrl and at the
same time press C. If three keys are used, hold down the first two and at
the same time press the third.
ABC When procedures require an action such as clicking an icon
or entering text, the icon’s name or the text you are to type
in is represented in the type face you see to the left.
Display
ABC Names of Windows or icons or text generated by the
computer that appears on its display screen is presented in
the type face you see to the left.
Messages
Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.
Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Preface
x
v
TOSHIBA TE2300
Please read. A note is a hint or advice that helps you make best use of
your equipment.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Preface
i
TOSHIBA TE2300
1. Chapter 1
Introduction
This chapter provides an equipment checklist, and it identifies the
computer’s features, options and accessories.
Some of the features described in this manual may not function properly if
you use an operating system that was not preinstalled by TOSHIBA.
Equipment checklist
Carefully unpack your computer. Save the box and packing materials for
future use.
Hardware
Check to make sure you have all the following items:
■ TE2300 Portable Personal Computer
■ Universal AC adaptor and power cord
■ USB diskette drive (Provided with some models)
■ Modular cable
Software
Windows XP Professional Service Pack 1
■ The following software is preinstalled:
■ Microsoft® Windows XP Professional
■ Microsoft Internet Explorer
■ Modem driver
■ Display Driver
■ TOSHIBA Utilities
■ Wireless LAN driver
■ Sound Driver
TOSHIBA TE2300
User’s Manual 1-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-2
TOSHIBA TE2300
■ DVD Video Player
■ LAN Driver
■ Infrared Device Driver
■ TOSHIBA Power Saver
■ TOSHIBA Console
■ Online manual
■ Documentation:
■ TOSHIBA TE2300 Portable Personal Computer User’s Manual
■ TOSHIBA TE2300 QuickStart
■ Microsoft® Windows XP Professional manual
■ Safety Instruction Manual
■ Warranty information
■ Product Recovery CD-ROM or DVD-ROM
■ Tools & Utilities CD-ROM
Features
The computer uses TOSHIBA’s advanced Large Scale Integration (LSI),
Comple-mentary Metal-Oxide Semiconductor (CMOS) technology
extensively to provide compact size, minimum weight, low power usage,
and high reliability. This computer incorporates the following features and
benefits:
Processor
Built-in The computer is equipped with an
Intel®processor, on-die 32KB instruction L1
cache and 1MB L2 cache memory.
1.3 GHz Mobile Intel® Pentium® M Processor 1.3 GHz
Support Enhanced Intel® SpeedStep™
technology
1.4 GHz Mobile Intel® Pentium® M Processor 1.4 GHz
Support Enhanced Intel® SpeedStep™
technology
1.5 GHz Mobile Intel® Pentium® M Processor 1.5 GHz
Support Enhanced Intel® SpeedStep™
technology
1.6 GHz Mobile Intel® Pentium® M Processor 1.6 GHz
Support Enhanced Intel® SpeedStep™
technology
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-3
TOSHIBA TE2300
Some models carry Intel® CentrinoTM technology, which is based on three
separate technologies of Intel® Pentium® M, Intel® PRO/Wireless Network
Connection, and Intel® 855 Chipset Family.
Memory
Slots PC2100 256 or 512 or 1024MB memory modules
can be installed in the two memory slots for a
maximum of 2GB system memory.
Level 2 cache A 1MB level 2 cache is provided to maximize
performance.
Video RAM Allocated a part of System Memory dynamically
(Limit of graphics memory is 32MB at 128MB of
System Memory, Limit of Graphics memory is
64MB at more than 256MB of System Memory).
Drives
Hard disk drive The computer has an integrated, 2 1/2" hard disk
drive (HDD) for nonvolatile storage of data and
software. It comes in the following sizes.
■ 30.0GB(27.94 billion bytes)
■ 40.0GB(37.26 billion bytes)
■ 60.0GB(55.89 billion bytes)
■ 80.0GB(74.51 billion bytes)
Diskette drive Your computer may come with a 3 1/2" 1.44-
megabyte or 720-kilobyte connects to the USB
port. (Windows® XP does not support 720-
kilobyte diskettes.)
DVD-ROM drive Some models are equipped with a full-size, DVD-
ROM drive module that lets you run either digital
versatile or compact disks without using an
adaptor. It runs DVD-ROMs at maximum 8 speed
and CD-ROMs at maximum 24 speed. This drive
supports following formats:
• Photo CD™ • CD-R (read only)
• CD-ROM • CD-Rewritable (read only)
• CD-DA • CD-Text
• CD-ROM x A Mode 2 (Form1, Form2)
• Enhanced CD (CD-EXTRA)
• DVD-ROM • DVD-Video
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-4
TOSHIBA TE2300
CD-RW/DVD-ROM
drive
Some models are equipped with a full-size,
CD-RW/DVD-ROM drive module that lets you
run CD/DVDs without using an adaptor. It reads
DVD-ROMs at maximum 8 speed and CD-ROMs
at maximum 24 speed. It writes CD-R at up to 24
speed and CD-RW at up to 10 speed. See
Chapter 4, Operating Basics, for details. For
reading, this drive supports the same formats as
the DVD-ROM drive.
DVD Multi drive Some models are equipped with a full-size
DVD Multi drive that lets you read/write DVD-R,
DVD-RW, DVD-RAM, CD-R and CD-RW discs.
DVD Multi media can be read, written and
erased with random access like a diskette.
Data can be rewritten hundreds of thousands
of times over the life of a disc. For reading, this
drive supports the same formats as the DVD-
ROM drive. Refer to chapter 2, The Grand Tour,
for details.
Display
The computer’s LCD panel supports high-resolution video graphics. The
screen can be set at a wide range of viewing angles for maximum comfort
and readability.
Built-in Thin-film transistor color LCD is available in three
sizes: 14.1" XGA-TFT, 1024 horizontal x 768
vertical pixels
Graphics controller Graphics controller maximizes display
performance. Refer to Appendix E for more
information.
Keyboard
Built-in 85 keys or 86 keys, compatible with IBM
enhanced keyboard, embedded numeric overlay,
dedicated cursor control, and keys. See
Chapter 5.The Keyboard, for details.
AccuPoint II
Built-in A pointing device, the AccuPoint II, in the center
of the keyboard and control buttons at the base
of the keyboard enable control of the on-screen
pointer and scrolling of windows.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-5
TOSHIBA TE2300
Power
Battery pack The computer is powered by one rechargeable
lithium-ion battery pack.
RTC battery The internal RTC battery backs up the Real Time
Clock (RTC) and calendar.
AC adaptor The universal AC adaptor provides power to the
system and recharges the batteries when they
are low. It comes with a detachable power cord.
Because it is universal, it can receive a range of
AC voltage between 100 and 240 volts.
Ports
Headphone Enables connection of a stereo headphone
Parallel Parallel printer or other parallel device
(ECP ompatible).
Serial RS-232C compatible port (16550 UART
compatible)
Infrared This infrared port is compatible with Infrared
Data Association (IrDA 1.1) Fast InfraRed (FIR)
standards. It enables cableless 4 Mbps data
transfer with IrDA 1.1 compatible external
devices.
External monitor A 15-pin, analog VGA port supports VESA
DDC2B compatible functions.
PS/2 keyboard/
mouse
Connects an external PS/2 keyboard or PS/2
mouse.
Docking Special port for connecting an optional
Advanced Port Replicator II.
Universal Serial Bus Two Universal Serial Bus (USB) ports enable
chain connection of a number of USB-equipped
devices to one port on your computer. The ports
comply with USB2.0 standards.
Slots
PC card A PC card slot accommodates:
Two 5 mm Type II
One 10.5 mm Type III
Refer to Chapter 8, Optional Devices, for details.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-6
TOSHIBA TE2300
Multimedia
Sound System Windows Sound System compatible sound
system provides internal speaker as well as
jacks for an external microphone and
headphone. It also has a volume control dial.
Video-out jack This RCA jack lets you transfer NTSC-J,
NTSC-M or PAL-B data to external devices.
Communications
Modem An internal modem provides capability for data
and fax communication. It supports V.92
(US/Canda) and V.90 (other countries/regions).
The speed of data transfer and fax depends on
analog telephone line conditions. It has a modem
jack for connecting to a telephone line.
LAN The computer is equipped with a LAN card that
supports Ethernet LAN (10 Mbit/s, 10BASE-T)
and Fast Ethernet LAN (100 Mbit/s, 100BASE-
Tx).
Wireless LAN Some computers in this series are equipped with
a wireless LAN mini-PCI card that is compatible
with other LAN systems based on Direct
Sequence Spread Spectrum radio technology
that complies with the IEEE 802.11 Standard
(Revision A or B). Revision-A supports data
transfer up to 54 Mbit/s. Revision-B supports
data transfer up to 11 Mbit/s. Turbo Mode
(USA,Canada only) supports data transfer up to
108 Mbit/s. It has Frequency Channel Selection
(5 GHz or 2.4 GHz) and allows roming
overmultiple channels.
Slim Select Bay
Modules Slim Select Bay is a single-drive bay that
accommodates a DVD-ROM drive, CD-RW/DVD-
ROM drive, DVD Multi drive, optional Slim Select
Bay HDD adaptor, optional Slim Select Bay 2nd
battery pack. The TOSHIBA Mobile Extension
enables hot insertion of modules when you are
using a plug and play operating system.
Security
Security lock slot Connects an optional security lock to anchor the
computer to a desk or other large object
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-7
TOSHIBA TE2300
Software
Operating System Windows® XP Professional is available. Refer to
the preinstalled software section at the front of
this chapter.
TOSHIBA Utilities A number of utilities and drivers are preinstalled
to make your computer more convenient to use.
Refer to the Utilities section in this chapter.
Plug and Play When you connect an external device to the
computer or when you install a component, Plug
and Play capability enables the system to
recognize the connection and make the
necessary configurations automatically.
Special features
The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.
Hotkeys Key combinations let you quickly modify the
system configuration directly from the keyboard
without running a system configuration program.
Keypad overlay Keys with gray lettering make up the keypad
overlay, which lets you use the keyboard for ten-
key operations or cursor control.
Display automatic
power off
This feature automatically cuts off power to the
internal display when there is no keyboard input
for a time specified. Power is restored when any
key is pressed. You can specify the time in the
Turn off monitor item of the Power Save Mode
window in Power Saver.
HDD automatic
power off
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk
is accessed. You can specify the time in the Turn
off hard disks item of the Power Save Mode
window in Power Saver.
System automatic
power off
This feature automatically turns off power to the
system when there is no input for a time
specified. You can specify the time in the When
the system standby time has passed item of the
System Power Mode window in Power Saver.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-8
TOSHIBA TE2300
Battery save mode This feature lets you save battery power. You can
specify the Power Save Mode in the Running on
batteries item of the Power Save Modes window
in Power Saver.
Power on password. Two levels of password security are available:
supervisor and user. This feature prevents
unauthorized access to your computer.
Instant security A hotkey function blanks the screen and disables
the computer providing quick and easy data
security.
Panel power on/off This feature turns power to the computer off
when the display panel is closed and turns it
back on when the panel is opened. You can
specify the setting in the When I close the lid
item of the System Power Mode window in
Power Saver.
Auto power on This feature lets you set a time and date for the
computer to turn on automatically. The feature is
useful for receiving remote communications
while you are asleep or away. You can specify
the setting in Scheduled Tasks.
Standby If you have to interrupt your work, you can turn
off the power without exiting from your software.
Data is maintained in the computer’s main
memory. When you turn on the power again, you
can continue working right where you left off.
Hibernation This feature lets you turn off the power without
exiting from your software. The contents of main
memory is saved to the hard disk, when you turn
on the power again, you can continue working
right where you left off.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-9
TOSHIBA TE2300
Heat dispersal To protect from overheating, the CPU has an
internal temperature sensor. If the computer’s
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. Use the Fan item of the Power Save
Modes window in Power Saver.
Maximum Turns on fan first, then if
Performance necessary lowers CPU
processing speed.
Performance Uses a combination of fan
and lowering the CPU
processing speed.
Battery optimized Lowers the CPU processing
speed first, then if necessary
turns on the fan.
Utilities
This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
read.me files.
TOSHIBA Power
Saver
To access this power savings management
program, open the Control Panel and select the
TOSHIBA Power Saver icon.
HW Setup This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, click the Windows Start button and
click Control Panel. In the Control Panel, select
the TOSHIBA HW Setup icon.
DVD Video Player The DVD Video Player is used to play DVD-
Video. It has an on-screen interface and
functions. Click Start, point to All Programs,
point to InterVideo WinDVD 4, then click
InterVideo WinDVD 4.
Drag’n Drop CD +
DVD
This easy-to-use software lets you record CDs
with just a few mouse clicks. You can create CDs
in several formats including audio CDs that can
be played on a standard stereo CD player and
data CDs to store the files and folders on your
hard drive. This software can be used only on
model with CD-RW/DVD-ROM drive and
DVDMulti drive.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-10
TOSHIBA TE2300
TOSHIBA Mobile
Extension
This utility enables hot insertion of Slim Select
Bay modules, that is, you can remove/insert Slim
Select Bay modules while the computer is on. To
activate this utility, select TOSHIBA Mobile
Extension from TOSHIBA Console.
ConfigFree ConfigFree is a suite of utilities to allow easy
control of communication device and network
connections. ConfigFree also allows you to find
communication probrems and create profiles for
easy switching between location and
communication networks.
You can boot ConfigFree from the menu bar as
follows.
Windows XP: [Start] - [All Programs] - [TOSHIBA
ConfigFree] - [ConfigFree]
Options
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
Memory expansion Two memory slots are available for installing 256
or 512 or 1024MB memory modules. The
modules are PC2100, 200-pin, SO Dual In-line
(SO-DIMM).
Main battery pack An additional battery pack (PA3286*) can be
purchased from your TOSHIBA dealer. The
battery pack is identical to the one that came
with your computer. Use it as a spare or
replacement.
AC adaptor If you use your computer at more than one site,
it may be convenient to purchase an additional
AC adaptor for each site so you will not have to
carry the adaptor with you.
USB diskette drive A 3 1/2" diskette drive accommodates 1.44-
megabyte or 720-kilobyte diskettes. It connects
to a USB port. (Windows® XP does not support
720-kilobyte diskettes.)
Security lock A slot is available to attach a security cable to
the computer to deter theft.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Introduction
1-11
TOSHIBA TE2300
Advanced Port
Replicator II
The Port Replicator provides the ports available
on the computer in addition to separate PS/2
mouse and PS/2 keyboard ports, a digital visual
interface (DVI) port, i.LINK™ (IEEE1394) port,
line-in jack and line-out jack.
The TE2300 does not support the DVI and i.LINK ports on the Advanced
Port Replicator II.
Slim Select Bay options
The following modules can be installed in the Slim Select Bay.
DVD-ROM drive Refer to the Features section for details.
CD-RW/DVD-ROM
drive
Refer to the Features section for details.
DVD Multi drive Refer to the Features section for details.
Slim Select Bay HDD
adaptor
An adaptor lets you insert an optional HDD
described in Chapter 8, Optional Devices.
Hard disk drive You can increase your computer’s data storage
capacity with an additional 30 GB (27.94 billion
bytes), 40 GB (37.26 billion bytes), 60 GB (55.89
billion bytes) and 80 GB (74.51billion bytes) hard
disk drive in the Slim Select Bay HDD adaptor.
Slim Select Bay 2nd
battery pack
The secondary battery increases your
computer’s battery power and operating time
when a main battery is also installed.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
2-1
TOSHIBA TE2300
2. Chapter 2
The Grand Tour
This chapter identifies the various components of your computer. Become
familiar with each component before you operate the computer.
Front with the display closed
The figure below shows the computer’s front with its display panel in the
closed position.
Front of the computer with display closed
Display latch This latch secures the LCD panel in its closed position.
Slide the latch to open the display.
Microphone
jack
A standard 3.5 mm mini microphone jack enables
connection of a three-conductor mini jack for monaural
microphone input.
Headphone
jack
A standard 3.5 mm mini headphone jack enables
connection of a stereo headphone (16 ohm minimum) or
other device for audio output. When you connect
headphones, the internal speakers are automatically
disabled.
TOSHIBA TE2300
User’s Manual 2-1
INFRARED PORT HEADPHONE
MICROPHONE DISPLAY LATCH
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-2
TOSHIBA TE2300
Infrared port This infrared port is compatible with Infrared Data
Association (IrDA 1.1) standards. It enables cableless 4
Mbps, 1.152 Mbps, 115.2 Kbps, 57.6 Kbps, 38.4 Kbps,
19.2 Kbps or 9.6 Kbps data transfer with IrDA 1.1
compatible external devices.
Left side
The figure below shows the computer’s left side.
The left side of the computer
Security lock
slot
A security cable attaches to this slot. The optional
security cable anchors your computer to a desk or
other large object to deter theft.
Video-out jack Plug an RCA video connector into this jack.
PC card slot A PC card slot can accommodate two 5 mm PC cards
(Type II) or one 10.5 mm PC card (Type III). The slot
supports 16-bit PC cards and CardBus PC cards.
Keep foreign objects out of the PC card slot. A pin or similar object can
damage the computer’s circuitry.
PC card lock This lock prevents removal of a PC card when it is in the
lock position and a security card is attached.
Slim Select
Bay
A DVD-ROM drive, CD-RW/DVD-ROM drive, DVD Multi
drive, Slim Select Bay HDD adaptor, or secondary
battery pack can be installed in the Slim Select Bay.
Wireless
communica-
tion switch
Slide this switch toward the back of the computer to
turn on Wireless LAN. Slide it toward the front of the
computer to turn off the functions.
SECURITY LOCK SLOT VOLUME CONTROL
WIRELESS
COMMUNICATION
SWITCH
SLIM SELECT
BAY
PC CARD
SLOT
PC CARD
LOCK
VIDEO-OUT
JACK
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-3
TOSHIBA TE2300
Set the switch to off in airplanes and hospitals. Check the Wireless
communication indicator. It will stop glowing when the wireless
communication is off.
Volume control Use this dial to adjust the volume of the system
speakers and headphones.
Right side
The figure below shows the computer’s right side.
The right side of the computer
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-4
TOSHIBA TE2300
Back side
The figure below shows the computer’s back side.
The computer’s back side
DC IN 15V The AC adaptor connects to this socket. Use only the
model of AC adaptor that comes with the computer.
Using the wrong adaptor can damage your computer.
Fan vent Provides air flow for the fan.
Be careful not to block the fan vent. Also be careful to keep foreign
objects out of the vents. A pin or similar object can damage the
computer’s circuitry.
External
monitor
This 15-pin port lets you connect an external monitor.
Parallel port This Centronics-compatible, 25-pin parallel port is used
to connect a parallel printer or other parallel device.
This port supports Extended Capabilities Port (ECP)
standard.
Modem jack This jack lets you use a modular cable to connect the
modem directly to a telephone line.
1. In case of a lightning storm, unplug the modem cable from the
telephone jack.
2. Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
F
AN VENT MODEM JAC
K
LINK INDICATOR
(GREEN)
LAN ACTIVE
INDICATOR
(ORANGE) USB PORTS
DC IN 15
V
EXTERNAL
MONITOR PORT
PARALLEL
PORT
LAN
JACK
SERIAL
PORT
PS/2 KEYBOARD/
MOUSE PORT
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-5
TOSHIBA TE2300
Ether
LAN jack This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T) and Fast Ethernet LAN (100
megabits per second, 100BASE-Tx).
LAN active
indicator
(orange)
This indicator glows orange when data is being
exchanged between the computer and the LAN.
Link indicator
(green)
This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
Serial port Use this 9-pin port to connect external serial devices
such as an external modem, a serial mouse or printer.
Universal
Serial Bus Port
The two Universal Serial Bus (USB) ports comply with
USB 2.0 standards, which enable data transfer speeds
40 times faster than the USB 1.1 standards. (The ports
also support USB 1.1)
Keep foreign objects out of the USB connectors. A pin or similar object
can damage the computer’s circuitry.
Operation of all functions of all USB devices has not been confirmed.
Some functions might not execute properly.
PS/2
keyboard/
mouse port
Use this port to connect an external PS/2 compatible
keyboard or mouse. The computer automatically
recognizes which device you have connected when you
turn on the power.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-6
TOSHIBA TE2300
Underside
The figure below shows the underside of the computer. Make sure the
display is closed before turning over your computer.
The underside of the computer
Docking port Use this port to connect an optional Advanced Port
Replicator II.
Keep foreign objects out of the docking port. A pin or similar object can
damage the computer’s circuitry.
Docking holes These holes ensure a proper connection between the
computer and and optional Advanced Port Replicator II.
Battery pack The battery pack powers the computer when the AC
adaptor is not connected. The Batteries section in
Chapter 6, Power and Power-Up Modes, describes how
to access the battery pack. Additional battery packs
can be purchased from your TOSHIBA dealer to extend
the computer’s battery operating time.
Battery pack
lock
Slide this lock to release or secure the battery pack.
Battery release
latch
Slide this latch to release or the battery pack.
Memory
module cover
This cover protects two memory module sockets. One
or two modules are preinstalled.
DOCKING HOLES DOCKING PORT DOCKING HOLES
MEMORY
MODULE
COVER
SLIM
SELECT
BAY LATCH
SLIM
SELECT
BAY LOCK
BATTERY
PACK
BATTERY
RELEASE
LATCH
BATTERY
PACK
LOCK
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-7
TOSHIBA TE2300
Slim Select
Bay lock
There are two screw holes next to the Slim Select Bay
latch. One screw is initially set in the front hole, which is
the unlock position. To lock the Slim Select Bay latch,
set the screw in the back hole.
Use a point size 0 Phillips screwdriver.
Slim Select
Bay latch
Slide this latch to free the Slim Select Bay for removal.
Front with the display open
The figure below shows the front of the computer with the display open.
To open the display, slide the display latch on the front of the computer
and lift the display up. Position the display at a comfortable viewing
angle.
The front with the display open
DISPLAY
SCREEN
SENSOR
SWITCH
SPEAKER
A
CCUPOINT II
CONTROL
BUTTONS
POWER
SOURCE/
SYSTEM
INDICATORS
A
CCUPOINT II
SPEAKER
POWER
BUTTON
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-8
TOSHIBA TE2300
Display screen The full-color LCD displays high-contrast text and
graphics and is compatible with the industry standard
eXtended Graphics Array (XGA). The LCD consists of
up to 1024 × 768 pixels or dots. The computer has a
Thin-Film Transistor (TFT) display. Refer to Appendix E.
When the computer operates on power through the AC
adaptor, the display screen’s image will be somewhat
brighter than when it operates on battery power. The
lower brightness level is intended to save battery power.
Power button Press the power button to turn the computer’s power
on and off.
AccuPoint II A pointer control device located in the center of the
keyboard is used to control the on-screen pointer. Refer
to the AccuPoint II section in Chapter 4, Operating
Basics.
AccuPoint II
control
buttons
Control buttons below the keyboard let you select menu
items or manipulate text and graphics designated by
the on-screen pointer.
Speakers The speakers emit sound generated by your software
as well as audio alarms, such as low battery condition,
generated by the system.
Power source/
system
indicators
LEDs let you monitor the status of various computer
functions. Details are given in the Indicators section.
Sensor switch This switch shuts down the computer when you close
the cover and the panel power on/off feature is enabled.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-9
TOSHIBA TE2300
System Indicators
The figure below shows the indicators, which light when various computer
operations are in progress.
The power source/system indicators
Power source/system indicators
DC IN The DC IN indicator glows green when DC power is
supplied from the AC power adaptor. If the adaptor’s
output voltage is abnormal or if the power supply
malfunctions, this indicator flashes orange.
Power The Power indicator glows green when the computer is
on. If you turn off the computer in Resume mode, this
indicator blinks orange (one second on, two seconds
off) while the computer shuts down.
Main battery The Main battery indicator shows the condition of the
charge. Green means fully charged and orange means
being charged. Refer to Chapter 6, Power and Power-
Up Modes.
Disk The Disk indicator glows green when the computer is
accessing a disk drive.
Slim Select
Bay
The Slim Select Bay indicator glows green when the
computer is accessing a DVD-ROM drive, CD-RW/DVD-
ROM drive, DVD Multi drive, Slim Select Bay HDD
adaptor or secondary battery pack in the Slim Select
Bay. When the secondary battery is charging, the
indicator glows orange.
Wireless
communica-
tion
The Wireless communication indicator glows orange
when the Wireless LAN function is turned on.
DC IN
POWER
MAIN
BATTERY DISK SLIM
SELECT
BAY
WIRELESS
COMMUNICATION
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-10
TOSHIBA TE2300
The figures below show the positions of the keypad overlay indicators
and the CapsLock indicator.
When the F10 key indicator glows the keypad overlay lets you enter
numbers. When the F11 key indicator glows the keypad overlay lets you
control the cursor.
Keypad overlay indicators
When the CapsLock indicator glows the keyboard is in all-caps mode.
CapsLock indicator
Keyboard indicator
Caps Lock This indicator glows green when the alphabet keys are
locked in uppercase.
Arrow mode When the Arrow mode indicator lights green, you can
use the keypad overlay (white labeled keys) as cursor
keys. Refer to the Keypad overlay section in Chapter 5,
The Keyboard.
Numeric mode You can use the keypad overlay (white labeled keys) for
numeric input when the Numeric mode indicator lights
green. Refer to the Keypad overlay section in Chapter 5,
The Keyboard.
A
RROW MODE
NUMERIC MODE
CAPS LOCK
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-11
TOSHIBA TE2300
USB diskette drive
Some computers in this series come with a 3 1/2" diskette drive that
accommodates 1.44-megabyte or 720-kilobyte diskettes. It connects to
the USB port.
USB diskette drive
Disk-In-Use
Indicator
This indicator lights when the diskette is being
accessed.
Diskette slot Insert diskette in this slot.
Eject button When a diskette is fully seated in the drive, the eject
button pops out. To remove a diskette, push in the eject
button and the diskette pops out partially for removal.
Check the Disk-In-Use indicator when you use the diskette drive. Do not
press the eject button or turn off the computer while the light is glowing.
Doing so could destroy data and damage the diskette or the drive.
1. The external diskette drive should be placed on a flat, horizontal
surface when in use. Do not set the drive on an incline greater than
20° while it is operating.
2. Do not set anything on top of the diskette drive.
DISK-IN-USE
INDICATOR
DISKETTE SLOT
EJECT BUTTON
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-12
TOSHIBA TE2300
Slim Select Bay modules
The Slim Select Bay can accommodate the following modules: DVD-ROM
drive, CD-RW/DVD-ROM drive, DVD multi drive, optional Slim Select Bay
HDD adaptor and optional Slim Select Bay 2nd battery pack.
DVD-ROM drive
An optional full-size DVD-ROM drive module lets you run either 12 cm
(4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It may be
selected as a standard component or as an option.
The read speed is slower at the center of a disk and faster at the outer
edge. The maximum (outer edge) speeds for DVDs and CDs are:
DVD 8 speed (maximum)
CD 24 speed (maximum)
This drive supports the following formats:
■ DVD-ROM ■ DVD-Video
■ Photo CD ■ CD-R (read only)
■ CD-ROM ■ CD-Rewritable (read only)
■ CD-ROM x A ■ CD-DA
■ CD-EXTRA ■ CD-Text
The optical media device
Disc-In-Use Indicator This indicator lights when the CD/DVD is being
accessed.
Eject button Press the eject button to open the drawer
partially.
Eject hole Insert a slender object to open the drawer when
the power to the computer is off.
DISK-IN-USE
INDICATOR
EJECT HOLE
EJECT BUTTON
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-13
TOSHIBA TE2300
Check the Slim Select Bay indicator when you use the DVD-ROM drive.
Do not press the eject button, disconnect a drive or turn off the computer
while the light is glowing. Doing so could damage the DVD/CD or the
drive.
DVD-ROM drives and media are manufactured according to the
specifications of six marketing regions. When you purchase DVD media,
make sure it matches your drive, otherwise it will not play properly.
Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China
CD-RW/DVD-ROM drive
The full-size CD-RW/DVD-ROM drive module lets you record data to
rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15")
CD/DVDs without using an adaptor. The computer is configured with
either a DVD-ROM drive or CD-RW/DVD-ROM drive.
The read speed is slower at the center of a disc and faster at the outer
edge.
DVD read 8 speed (maximum)
CD read 24 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 10 speed (maximum)
This drive supports the following formats:
■ Photo CD ■ CD-R
■ CD-ROM ■ CD-Rewritable
■ CD-DA ■ CD-Text
■ CD-ROM x A Mode 2 (Form1, Form2) ■ Enhanced CD (CD-EXTRA)
CD-R describes compact disks that can be written only once. The
recorded data cannot be erased or changed. Use 8-speed CD-R disks.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-14
TOSHIBA TE2300
CD-RW describes compact disks that can be recorded more than once.
Use either 1, 2, or 4 multi speed CD-RW disks or high-speed 4- to 10-
speed disks. The write speed of the high-speed CD-RW disks is
maximum 8-speed.
■ Use Drag’n Drop CD+DVD to write compact disks.
The physical features of this drive are similar to those of the DVD-ROM
drive. Refer to the illustration in the DVD-ROM drive section.
Check the Slim Select Bay indicator when you use the CD-RW/DVD-
ROM drive. Do not press the eject button, disconnect a drive or turn off
the computer while the light is glowing. Doing so could damage the CD or
the drive.
CD-RW/DVD-ROM drives and media are manufactured according to the
specifications of six marketing regions. When you purchase DVD media,
make sure it matches your drive, otherwise it will not play properly.
Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China
DVD Multi drive
The full-size DVD Multi drive module lets you record data to rewritable
CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without using an adaptor.
An ATAPI interface controller is used for CD/DVD-ROM operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows and
Slim Select Bay indicator glows.
The read speed is slower at the center of a disc and faster at the outer
edge.
DVD read 8 speed (maximum)
DVD-R write 1 speed
DVD-RW write 1 speed
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-15
TOSHIBA TE2300
DVD-RAM write 2 speed
CD read 24 speed (maximum)
CD-R write 16 speed (maximum)
CD-RW write 8 speed (maximum)
This drive supports the following formats:
■ DVD-ROM ■ DVD-Video
■ CD-DA ■ CD-Text
■ Photo CD (single/multi-session) ■ CD-ROM Mode1, Mode2
■ CD-ROM XA Mode2 (Form1, Form2) ■ Enhanced CD (CD-EXTRA)
■ CD-G (Audio CD only) ■ Addressing Method 2
DVD Multi drives and disc are manufactured according to the
specifications of six marketing regions. When you purchase DVD-Video,
make sure it matches your drive, otherwise it will not play properly.
Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China
Use the WinDVD 4 application to view DVD-Video discs.
CD-R and DVD-R discs can be written only once. The recorded data
cannot be erased or changed.
CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi
speed CDRW discs or high-speed 4- to 10-speed discs. The write speed
of the high-speed CD-RW discs is maximum 10-speed.
DVD-RW/-RAM discs can be recorded more than once.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-16
TOSHIBA TE2300
Slim Select Bay HDD adaptor (Black)
You can increase your computer’s data storage capacity by installing an
optional, integrated, 2 1/2" HDD in the Slim Select Bay.
The Slim Select Bay HDD adaptor
Slim Select Bay 2nd battery pack (Black)
An optional battery pack can be installed in the Slim Select Bay to
increase the computer’s battery power and operating time. For details,
refer to the documentation accompanying the secondary battery pack.
Refer to Chapter 8, Optional Devices, for details on installing a Slim Select
Bay 2nd battery pack.
The Slim Select Bay 2nd battery pack
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
2-17
TOSHIBA TE2300
AC adaptor
The AC adaptor converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you
to use the computer in almost any region.
To recharge the battery, simply connect the AC adaptor to a power source
and the computer. See Chapter 6, Power and Power-Up Modes, for
details.
The AC adaptor
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The current rating for
the computer is 5.0 amperes.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Grand Tou
r
3-18
TOSHIBA TE2300
3. Chapter 3
Getting Started
This chapter provides basic information to get you started using your
computer. It covers the following topics:
■ Setting up your work space — for your health and safety
Be sure also to read the Safety Instruction Manual. This guide, which is
included with the computer, explains product liability.
■ Connecting the AC adaptor
■ Opening the display
■ Turning on the power
■ Starting up for the first time
■ Turning off the power
■ Restarting the computer
■ Restoring the preinstalled software
If you are a new user, follow the steps in each section of this chapter as
you prepare to operate your computer.
All users should be sure to carefully read the section Restoring the
preinstalled software.
TOSHIBA TE2300
User’s Manual 3-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-2
TOSHIBA TE2300
Setting up your work space
Establishing a comfortable work site is important for you and your
computer. A poor work environment or stressful work habits can result in
discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. Proper ambient conditions should also be maintained for the
computer’s operation. This section discusses the following topics:
■ General conditions
■ Placement of the computer and peripheral devices
■ Seating and posture
■ Lighting
■ Work habits
General conditions
In general, if you are comfortable, so is your computer, but read the
following to make sure your work site provides a proper environment.
■ Make sure there is adequate space around the computer for proper
ventilation.
■ Make sure the AC power cord connects to an outlet that is close to
the computer and easily accessible.
■ The temperature should be 5 to 35 degrees Centigrade (41 to
95 degrees Fahrenheit) and the relative humidity should be 20 to
80 percent.
■ Avoid areas where rapid or extreme changes in temperature or
humidity may occur.
■ Keep the computer free of dust, moisture, and exposure to direct
sunlight.
■ Keep the computer away from heat sources, such as electric heaters.
■ Do not use the computer near liquids or corrosive chemicals.
■ Do not place the computer near objects that create strong magnetic
fields (e.g., stereo speakers).
■ Do not operate the computer in close proximity to a mobile phone.
■ Leave ample ventilation room for the fan. Do not block the vents.
Placement of computer
Position the computer and peripheral devices to provide comfort and
safety.
■ Set the computer on a flat surface at a comfortable height and
distance. The display should be no higher than eye level to avoid eye
strain.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-3
TOSHIBA TE2300
■ Place the computer so that it is directly in front of you when you work
and make sure you have adequate space to easily operate other
devices.
■ Allow adequate space behind the computer to let you freely adjust the
display. The display should be angled to reduce glare and maximize
visibility.
■ If you use a paper holder, set it at about the same height and distance
as the computer.
Seating and posture
The height of your chair in relation to the computer and keyboard as well
as the support it gives your body are primary factors in reducing work
strain. Refer to the following tips and to the figure below.
Posture and positioning of the computer
■ Place your chair so that the keyboard is at or slightly below the level of
your elbow. You should be able to type comfortably with your
shoulders relaxed.
■ Your knees should be slightly higher than your hips. If necessary, use
a foot rest to raise the level of your knees to ease pressure on the
back of your thighs.
■ Adjust the back of your chair so it supports the lower curve of your
spine.
■ Sit straight so that your knees, hips and elbows form approximately
90 degree angles when you work. Do not slump forward or lean back
too far.
90° ANGLES
BELOW EYE
LEVEL
FOOT REST
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-4
TOSHIBA TE2300
Lighting
Proper lighting can improve legibility of the display and reduce eye strain.
■ Position the computer so that sunlight or bright indoor lighting does
not reflect off the screen. Use tinted windows, shades or other screen
to eliminate sun glare.
■ Avoid placing the computer in front of bright light that could shine
directly in your eyes.
■ If possible, use soft, indirect lighting in your computer work area. Use
a lamp to illuminate your documents or desk, but be sure to position
the lamp so that it does not reflect off the display or shine in your
eyes.
Work habits
A key to avoiding discomfort or injury from repetitive strain is to vary your
activities. If possible, schedule a variety of tasks into your work day. If you
must spend long periods at the computer, finding ways to break up the
routine can reduce stress and improve your efficiency.
■ Sit in a relaxed posture. Good positioning of your chair and equipment
as described earlier can reduce tension in your shoulders or neck and
ease back strain.
■ Vary your posture frequently.
■ Occasionally stand up and stretch or exercise briefly.
■ Exercise and stretch your wrists and hands a number of times during
the day.
■ Frequently, look away from the computer and focus your eyes on a
distant object for several seconds, for example 30 seconds every 15
minutes.
■ Take frequent short breaks instead of one or two long breaks, for
example, two or three minutes every half hour.
■ Have your eyes examined regularly and visit a doctor promptly, if you
suspect you might be suffering from a repetitive strain injury.
A number of books are available on ergonomics and repetitive strain injury
or repetitive stress syndrome. For more information on these topics or for
pointers on exercises for such stress points as hands and wrists, please
check with your library or book vendor. Also refer to the computer’s
Safety Instruction Manual.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-5
TOSHIBA TE2300
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want
to operate from AC power. It is also the fastest way to get started,
because the battery pack will need to be charged before you can operate
from battery power.
The AC adaptor can be connected to any power source supplying from
100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor
to charge the battery pack, refer to Chapter 6, Power and Power-Up
Modes.
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The current rating for
the computer is 5.0 amperes.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
2. Connect the AC adaptor’s DC output plug to the DC IN port on the
back side of the computer.
Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicator on the front of the computer should glow.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-6
TOSHIBA TE2300
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to
unlatch the display panel.
2. Lift the panel up and adjust it to the best viewing angle for you.
When you open the display, hold it with both hands and lift up slowly.
Opening the display panel
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system (OS) and the OS has started up.
1. If an external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the
diskette.
2. Open the display panel.
3. Press and hold the button for two or three seconds.
Turning on the power
DISPLAY
LATCH
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-7
TOSHIBA TE2300
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows® XP Professional Startup Screen Logo.
Follow the on-screen directions.
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Standby mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode, no data is saved and
the computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
2. Make sure all disk(disc)activity has stopped, then remove any
CD/DVDs or diskette.
Make sure the Disk, Slim Select Bay and Slim Select Bay’s module
indicators are off. If you turn off the power while a disk (disc) is being
accessed, you can lose data or damage the disk(disc).
3. Click start then click Turn off computer. From the Turn off
computer menu select Turn o ff.
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Hibernation mode
The hibernation feature saves the contents of memory to the hard disk
when the computer is turned off. The next time the computer is turned on,
the previous state is restored. The hibernation feature does not save the
status of peripheral devices.
1. While entering hibernation mode, the computer saves the contents of
memory to the HDD. Data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Disk indicator to go out.
2. Do not install or remove a memory module while the computer is in
hibernation mode. Data will be lost.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-8
TOSHIBA TE2300
Benefits of hibernation
The hibernation feature provides the following benefits:
■ Saves data to the hard disk when the computer automatically shuts
down because of a low battery.
For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate window and the Battery Alarm item of the Alarm window.
Otherwise, the computer will shut down in Standby mode. If battery
power becomes depleted, data saved in Standby will be lost.
■ You can return to your previous working environment immediately
when you turn on the computer.
■ Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System hibernate feature.
■ You can use the panel power off feature.
Starting Hibernation
To enter Hibernation mode, follow the steps below.
1. Click Start.
2. Select Turn Off Computer.
3. Open the Turn Off Computer dialog box. Hibernate is not
displayed.
4. Press the Shift key. The Standby item will change to Hibernate.
5. Select Hibernate.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press
the power button or close the lid. First, however, make the appropriate
settings according to the steps below.
1. Open the Control Panel.
2. Open Performance and Maintenance and open TOSHIBA Power
Saver.
3. Select the Hibernate window, select the Enable Hibernate
support check box and click the Apply button.
4. Select the Power Save Modes window.
5. Double-click Power Mode (Full Power, Normal, etc.) and open the
System Power Mode window.
6. Enable the desired Hibernation settings for When I press the power
button and When I close the lid.
7. Click the OK button.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-9
TOSHIBA TE2300
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time,
the Built-in HDD indicator will light.
After you turn off the computer and memory is saved to the hard disk,
turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge
Standby mode
In standby mode the power remains on, but the CPU and all other
devices are in sleep mode.
1. Before entering Standby mode, be sure to save your data.
2. Do not install or remove a memory module while the computer is in
standby mode. The computer or the module could be damaged.
3. Do not remove the battery pack while the computer is in standby
mode (unless the computer is connected to an AC power source).
Data in memory will be lost.
4. If you carry the computer on board an aircraft or into a hospital, be
sure to shut down the computer in hibernation mode or in shutdown
mode to avoid radio signal interference.
Benefits of standby
The standby feature provides the following benefits:
■ Restores the previous working environment more rapidly than does
hibernation.
■ Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System Standby feature.
■ You can use the panel power off feature.
Executing standby
You can also enable Standby by pressing Fn + F3. See Chapter 5, The
Keyboard, for details.
You can enter standby mode in one of three ways:
1. Click Start, click Turn Off Computer and click Stand by.
2. Close the display panel. This feature must be enabled. Refer to the
System Power Mode item in Power Saver Utility described in the
Control Panel.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-10
TOSHIBA TE2300
Open Performance and Maintenance and open TOSHIBA Power
Saver.
3. Press the power button. This feature must be enabled. Refer to the
System Power Mode item in Power Saver Utility described in the
Control Panel.
Open Performance and Maintenance and open TOSHIBA Power
Saver.
When you turn the power back on, you can continue where you left when
you shut down the computer.
1. When the computer is shut down in standby mode, the power
indicator glows orange.
2. If you are operating the computer on battery power, you can lengthen
the operating time by shutting down in hibernation mode. Standby
mode consumes more power.
Standby limitations
Standby will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
Restarting the computer
Certain conditions require that you restart the computer system. For
example, if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
There are three ways to restart the computer system:
1. Click start then click Turn off computer. From the Turn off computer
menu select Restart.
2. Press Ctrl + Alt + Del to display the Windows Task Manager, then
select Shutdown and Restart.
3. Press the power button and hold it down for five seconds. Wait 10 to
15 seconds, then turn the power on again by pressing the power
button.
Restoring the preinstalled software
If preinstalled files are damaged, use the Product Recovery CD-ROM or
the TOSHIBA Tools & Utilities CD-ROM to restore them.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-11
TOSHIBA TE2300
Restoring the complete system
To restore the operating system and all preinstalled software, follow the
steps below.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Product Recovery CD-ROM in the drive and turn off the
computer’s power.
2. Hold down the F12 key and turn on the power. When In Touch with
Tomorrow TOSHIBA appears, release the F12 key.
3. Use the left or right cursor key to select the CD-ROM drive in the
display menu. For details, refer to the Boot priority section in
Chapter 7, HW Setup and Passwords.
4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software
can not be recovered from the Product Recovery disk. Re-install these
applications (e.g. Works Suite, DVD Player, Games, etc) separately
from other media.
Restoring TOSHIBA utilities and drivers
If Windows is working properly, individual drivers or applications can be
separately restored. Use the Tools & Utilities CD-ROM according to
instructions in the booklet contained in the CD box to reinstall TOSHIBA
utilities and drivers.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
i
TOSHIBA TE2300
4. Chapter 4
Operating Basics
This chapter gives information on basic operations including using
AccuPoint II, USB diskette drive, optical media drives, the internal
modem, Wireless LAN, LAN and changing Slim Select Bay modules. It
also provides tips on caring for your computer, diskettes and CD/DVDs.
Using AccuPoint II
To use the AccuPoint II, simply push it with your finger tip in the direction
you want to move the on-screen pointer.
AccuPoint II and control buttons
Two large buttons below the keyboard are used like the buttons on a
mouse pointer. Press a button to select a menu item or to manipulate text
or graphics designated by the pointer. The right small button scrolls down
the screen and the left one scrolls up.
AccuPoint II precautions
Certain conditions can affect the on-screen pointer when using
AccuPoint II. For example, the pointer may travel contrary to AccuPoint II
operation or an error message may appear, if
TOSHIBA TE2300
User’s Manual 4-1
ACCUPOINT II
ACCUPOINT II
CONTROL BUTTONS
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-2
TOSHIBA TE2300
■ You touch the AccuPoint II during power-up.
■ You apply constant, soft pressure during power-up.
■ There is a sudden temperature change.
■ Strong stress is applied to the AccuPoint II.
If an error message appears, reboot the computer. If an error message
does not appear, wait a moment for the pointer to stop, then continue
operation.
Replacing the cap
The AccuPoint II cap is an expendable item that should be replaced after
prolonged use.
1. To remove the AccuPoint II cap, firmly grasp the cap and pull it
straight up.
Removing the AccuPoint II cap
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap’s square hole with the
peg.
PEG
ACCUPOINT II CAP
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-3
TOSHIBA TE2300
Using the USB diskette drive
A 3 1/2" diskette drive connects to the computer’s USB port. It
accommodates 1.44-megabyte or 720-kilobyte diskettes. Refer to
Chapter 2, The Grand Tour, for more information.
Connecting 3 1/2" diskette drive
To connect the drive, plug the diskette drive connector into a USB port.
Refer to figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.
Connecting the USB diskette drive
If you connect the diskette drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
Disconnecting 3 1/2" diskette drive
When you have finished using the diskette drive, follow the procedures
below to disconnect it:
1. Wait for the indicator light to go out to make sure all diskette activity
has stopped.
If you disconnect the diskette drive or turn off the power while the
computer is accessing the drive you may lose data or damage the diskette
or the drive.
2. Open the Safety Remove Hardware icon on the system tray.
3. Click Diskette drive.
4. Pull the diskette drive connector out of the USB port.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-4
TOSHIBA TE2300
Changing Slim Select Bay modules
This section explains how to change modules in the Slim Select Bay.
The illustrations show replacement of the DVD-ROM drive with the Slim
Select Bay HDD adaptor. Therefore, the text refers to those modules.
However, the procedures are the same for any of the other modules:
CD-RW/DVD-ROM drive, DVD Multi drive, Slim Select Bay 2nd battery
pack.
1. To avoid injury, do not put your hand into the Slim Select Bay slot.
2. Before removing or inserting a second battery pack, turn off the
computer’s power.
The TOSHIBA Mobile Extension is preinstalled to support hot swapping
under Windows. Refer to Chapter 1, Introduction
,
for information on using
this utility to change modules while the computer’s power is on.
Removing a module
Remove the DVD-ROM drive as described below.
1. Check all disk indicators to make sure no disks are operating.
2. Turn the computer upside down.
Wait for all disc indicators to go out before you turn over the computer
and be careful to lay the computer down gently. Shock can damage the
HDD or other components.
3. Be sure the screw near the icon securing the Slim Select Bay.
4. Make sure the screw in the Slim Select Bay lock is set in the hole for
the unlock position.
5. Slide the Slim Select Bay latch to the unlock position.
6. Graps the DVD-ROM drive and Slide it out.
The DVD-ROM drive and other Slim Select Bay modules can become hot
with use. Be careful when removing the module.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-5
TOSHIBA TE2300
Removing the DVD-ROM drive
Installing a module
Install the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay module, set the screw of the
Slim Select Bay lock in the back hole.
Installing the Slim Select Bay HDD adaptor
SLIM SELECT
BAY MODULE
SLIM SELECT BAY
LATCH
SLIM SELECT
BAY LOCK SLIM SELECT BA
Y
MODULE
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-6
TOSHIBA TE2300
Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM
drive. However, operation is the same for the CD-RW/DVD-ROM and
DVD Multi drives. The full-size drive provides high-performance execution
of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or
8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller
is used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay
indicator glows.
Use the WinDVD 4 application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs
section for precautions on writing to CDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to next figures.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
Pressing the DVD-ROM eject button
1. b. Pressing the eject button will not open the drawer when the DVD-
ROM drive’s power is off. If the power is off, you can open the
drawer by inserting a slender object (about 15 mm) such as a
straightened paper clip into the eject hole just to the right of the
eject button.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-7
TOSHIBA TE2300
Manual release with the eject hole
2. Grasp the drawer gently and pull until it is fully opened.
Pulling the drawer open
3. Lay the CD/DVD, label side up, in the drawer.
Diameter 1.0mm
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-8
TOSHIBA TE2300
Inserting a CD/DVD
When the drawer is fully opened, the edge of the computer will extend
slightly over the CD/DVD tray. Therefore, you will need to turn the
CD/DVD at an angle when you place it in the tray. After seating the
CD/DVD, however, make sure it lies flat, as shown in the figure above.
1. Do not touch the laser lens. Doing so could cause misalignment.
2. Be careful to keep foreign matter from entering the drive. Check the
back edge of the tray to make sure it carries no debris before closing
the drive.
4. Press gently at the center of the CD/DVD until you feel it click into
place. The CD/DVD should lie below the top of the spindle, flush
with the spindle base.
5. Push the center of the drawer to close it. Press gently until it locks
into place.
If the CD/DVD is not seated properly when the drawer is closed, the
CD/DVD might be damaged. Also, the drawer might not open fully when
you press the eject button.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-9
TOSHIBA TE2300
Closing the DVD-ROM drawer
Removing discs
To remove the CD/DVD, follow the steps below and refer to the next
figure.
Do not press the eject button while the computer is accessing the DVD-
ROM drive. Wait for the DVD-In-Use indicator to go out before you open
the drawer. Also, if the CD/DVD is spinning when you open the drawer,
wait for it to stop before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull
the drawer out until it is fully opened.
1. When the drawer pops open slightly, wait a moment to make sure the
CD/DVD has stopped spinning before pulling the drawer fully open.
2. Turn off the power before you use the eject hole. If the CD/DVD is
spinning when you open the drawer, the CD/DVD could fly off the
spindle and cause injury.
2. The CD/DVD extends slightly over the sides of the drawer so you
can grasp it. Hold the CD/DVD gently and lift it out.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-10
TOSHIBA TE2300
Removing a CD/DVD
3. Push the center of the drawer to close it. Press gently until it locks
into place.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-11
TOSHIBA TE2300
Writing CDs on CD-RW/DVD-ROM drive
Depending on the type of drive installed, you may be able to write CDs.
The CD-RW/DVD-ROM drive lets you write as well as read CD-ROMs.
Observe the precautions in this section to ensure the best performance
for writing CDs. For information on loading and unloading CDs refer to the
Using optical media drive section.
CD-R discs can be written to only once. CD-RW discs can be rewritten
many times.
Before writing or rewriting
Please observe the following points when you write or rewrite the data.
■ We recommend the following manufacturers of CD-R and CD-RW
media. Media quality can affect write or rewrite success rates.
CD-R: TAIYOYUDENCO.,LTD.
Mitsui Chemicals Inc.
MITSUBISHICHEMICALCORPORATION
RICOH Co., Ltd.
Hitachi Maxell Ltd.
CD-RW: MITSUBISHI CHEMICAL CORPORATION
RICOH Co., Ltd.
TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.
■ CD-RW can generally be rewritten about 1,000 times. However, the
actual number of rewrites is affected by the quality of the media and
the way it is used.
■ Be sure to connect the AC adaptor when you write or rewrite.
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver which can put a heavy
load on the CPU.
■ Operate the computer at full power. Do not use power-saving
features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background
■ Do not use hard disk utilities, including those intended to enhance
HDD access speed. They may cause unstable operation and damage
data.
■ Write from the computer’s HDD to the CD. Do not try to write from
shared devices such as a LAN server or any other network device.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-12
TOSHIBA TE2300
■ Writing with software other than Drag’n Drop CD+DVD has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
■ Always copy data from the HDD to the CD. Do not use cut-and-paste.
The original data will be lost if there is a write error.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including use of a
mouse or AccuPoint II, closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the PC.
■ Install, remove or connect external devices, including the
following: PC card, USB devices, external display, i.LINK devices,
optical digital devices.
■ Use the CD/MP3 control buttons to reproduce music and voice.
■ Open the optical media drive.
■ If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes trains, or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-13
TOSHIBA TE2300
Writing CD/DVDs on DVD Multi drive
You can use the DVD Multi drive to write data to either CD-R/-RW or
DVD-R/-RW/-RAM discs.
Important message
Before you write or rewrite to CD-R/-RW or DVD-R/-RW/-RAM disc, read
and follow all set-up and operating instructions in this section. If you fail
to do so, the DVD Multi drive may not function properly, and you may fail
to write or rewrite, lose data or incur other damage.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/-RW or DVD-R/-RW/-RAM disc that may be
caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/-RW or DVD-R/
-RW/-RAM disc that may be caused by writing or rewriting with this
product, or for any business profit loss or business interruption that
may be caused by the change or loss of the recorded contents.
■ Damage that may be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives,
you may experience unexpected writing or rewriting errors due to disc
quality or problems with hardware devices. Also, it is a good idea to make
two or more copies of important data, in case of undesired change or loss
of the recorded contents.
Read/write function chart
Disc type CD-R CD-
RW
DVD-
R
DVD-
RW
DVD-
RAM
DVD
+R
DVD
+RW
Re a d Yes Yes Yes Yes Ye s No No
Wri t e Yes Yes Yes Yes Yes No No
Drag’n Drop CD+DVD*1 Ye s Yes Yes Yes No No No
*1 Software supplied with the product can be used for writing to a disc.
■ Based on TOSHIBA’s limited compatibility testing, we suggest the
followingmanufacturers of CD-R/-RW and DVD-R/-RW/-RAM disc.
However, in noevent does TOSHIBA guarantee the operation, quality
or performance of anydisc. Disc quality can affect write or rewrite
success rates.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-14
TOSHIBA TE2300
CD-R: TAIYOYUDEN CO., LTD.
Mitsui Chemicals Inc.
MITSUBISHI CHEMICAL CORPORATIONRICOH Co., Ltd.
Hitachi Maxell Ltd.
CD-RW: MITSUBISHI CHEMICAL CORPORATION
RICOH Co., Ltd.
DVD-R: DVD Specifications for Recordable Disc for
GeneralVersion 2.0
TAIYOYUDEN CO., LTD.
PIONEER VIDEO CORPORATION
MITSUBISHI CHEMICAL CORPORATION
DVD-RW: DVD Specifications for Re-recordable Disc for
Version 1.1
VICTOR COMPANY OF JAPAN.LIMITED
TDK Corporation
DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0
or Version 2.1
Matsushita Electric Industrial Co., Ltd.
■ If the disc is poor in quality, dirty or damaged, writing or rewriting
errors may occur. Be careful to check the disc for dirt or damage
before you use it.
■ The actual number of rewrites to CD-RW or DVD-RW/-RAM is
affected by the quality of the disc and the way it is used.
■ There are two types of DVD discs: authoring and general use discs.
Do not use authoring discs. Only general use discs can be written to
by a computer drive.
■ You can use DVD-RAM discs that can be removed from a cartridge
and DVD-RAM discs designed without a cartridge. You cannot use a
disc with a 2.6 GH single-sided capacity or 5.2 GB double-sided
capacity.
■ Other DVD-ROM drives for computers or other DVD players may not
be able to read DVD-R/-RW discs.
■ You cannot partially delete any data written to a DVD-RW disc.
■ Data written to a CD-R/DVD-R disc cannot be deleted either in whole
or in part.
■ Data deleted (Erase) from a CD-RW and DVD-RW/-RAM disc cannot
be recovered. Check the content of the disc carefully before you
delete it. If multiple drives that can be written to are connected, be
careful not to delete data from the wrong drive.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-15
TOSHIBA TE2300
■ In writing to a DVD-R/-RW disc, some disc space is required for file
management, so you may not be able to write the full capacity of the
disc.
■ Since the disc is based on the DVD standard, it will be filled with
dummy data if the written data is less than about 1 GB. Even if you
write only a small amount of data, it might take time to fill in the
dummy data.
■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
Before writing or rewriting
Please observe the following points when you write or rewrite data.
■ When multiple drives that can be written are connected, be careful not
to write to the wrong drive.
■ Be sure to connect the AC adaptor before you write or rewrite.
■ Before you enter standby/hibernation mode, be sure to finish DVD-
RAM writing. Writing is finished if you can eject DVD-RAM media.
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy
load on the CPU.
■ Operate the computer in the full-power mode. Do not use power-
saving features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance
HDD access speed. They may cause unstable operation and data
damage.
■ Write from the computer’s HDD to the CD/DVD. Do not try to write
from shared devices such as a LAN server or any other network
device.
■ Writing with software other than Drag’n Drop CD+DVD is not
recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-
R/-RW or DVD-R/-RW/-RAM disc.
■ Do not perform any of the following actions when writing or rewriting:
■ Operate the computer for any other function, including using a
mouse or AccuPoint II or closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the computer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-16
TOSHIBA TE2300
■ Install, remove or connect external devices, including the
following: PC card, USB devices, external display, i.LINK devices,
optical digital devices.
■ Use the Audio/Video control button to reproduce music or voice.
■ Open the DVD Multi drive
■ Do not use standby/hibernation while you write or rewrite.
■ Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the DVD Multi drive
tray.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
■ Always copy data from the HDD to the DVD-RAM. Do not use cut-
and-paste. The original data will be lost if there is a write error.
Drag’n Drop CD+DVD
Note the following limitations when you use Drag’n Drop CD+DVD:
■ DVD-Video cannot be created using Drag’n Drop CD+DVD.
■ DVD-Audio cannot be created using Drag’n Drop CD+DVD.
■ You cannot use Drag’n Drop CD+DVD’s music CD function to record
music to a DVD-R/-RW disc.
■ Do not use the DISC Backup function of Drag’n Drop CD+DVD to
copy DVDVideo and DVD-ROM with copyright protection, because the
copy will not play correctly.
■ DVD-RAM disc cannot be backed up with the DISC Backup function
of Drag’n Drop CD+DVD.
■ You cannot backup a CD-ROM or CD-R/-RW to DVD-R/-RW using
the DISC Backup function of Drag’n Drop CD+DVD.
■ You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW to CD-R/
-RW using the DISC Backup function of Drag’n Drop CD+DVD.
■ Drag’n Drop CD+DVD cannot record in packet format.
■ You might not be able to use the DISC backup function of Drag’n
Drop CD+DVD to back up a DVD-R/-RW disc that was made with
other software on a different DVD-R/-RW recorder.
Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Right-click Data BOX and select Options to display the DATA DISC
Option window.
2. Mark the Record and Verify check box and select Byte compare.
3. Click the OK button.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-17
TOSHIBA TE2300
The “Record and Verify” function automatically checks whether data has
been correctly recorded onto a CD/DVD. “Byte compare” compares the
original data file with the data recorded on the CD/DVD and checks that
the data completely matches.
Media care
This section provides tips on protecting data stored on your CD/DVDs
and diskettes.
Handle your media with care. The following simple precautions will
increase the lifetime of your media and protect the data stored on them:
CD/DVDs
1. Store your CD/DVDs in the container they came in to protect them
and keep them clean.
2. Do not bend the CD/DVD.
3. Do not write on, apply a sticker to, or otherwise mar the surface of
the CD/DVD that contains data.
4. Hold the CD/DVD by its outside edge or the edge on the center hole.
Fingerprints on the surface can prevent the drive from properly
reading data.
5. Do not expose to direct sunlight, extreme heat or cold. Do not place
heavy objects on your CD/DVDs.
6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry
cloth. Wipe from the center out, do not wipe in a circular direction
around the CD/DVD. If necessary, use a cloth dampened in water or
a neutral cleaner. Do not use benzine, thinner or similar cleaner.
Diskettes
1. Store your diskettes in the container they came in to protect them
and keep them clean. If a diskette is dirty, do not use cleaning fluid.
Clean it with a soft damp cloth.
2. Do not slide back the diskette’s protective metal covering or touch
the diskette’s magnetic surface. Fingerprints may prevent the
diskette drive from reading data from the diskette.
3. Data may be lost if the diskette is twisted; bent; or exposed to direct
sunlight, extreme heat or cold.
4. Do not place heavy objects on your diskettes.
5. Do not eat, smoke, or use erasers near your diskettes. Foreign
particles inside the diskette’s jacket can damage the magnetic
surface.
6. Magnetic energy can destroy the data on your diskettes. Keep your
diskettes away from speakers, radios, television sets and other
sources of magnetic fields.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-18
TOSHIBA TE2300
Modem
This section describes how to connect and disconnect the internal
modem to and from a telephone jack.
The internal modem does not support voice functions. All data and fax
functions are supported.
1. In case of a lightning storm, unplug the modem cable from the
telephone jack.
2. Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you
will need to make sure the internal modem’s settings are correct for the
region in which it will be used.
To select a region, follow the steps below.
1. In Windows XP, click start, point to All Programs, point to
TOSHIBA Internal Modem and click Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
The Region Selection icon (Windows XP)
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony
location information will also be displayed. A check will appear next
to the currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from
the submenu.
■ When you click a region it becomes the modem’s region selection,
and the New Location for telephony will be set automatically.
■ When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem’s current region
setting.
Properties menu
Click the icon with the secondary mouse button to display the following
menu.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-19
TOSHIBA TE2300
The menu list (Windows XP)
Setting
You can enable or disable the following settings:
AutoRun Mode
The Region Select utility starts automatically when you start up the
operating system.
Open the Dialing Properties dialog box after selecting region.
The dialing properties dialog box will be displayed automatically after you
select the region.
Location list for region selection.
A submenu appears displaying location information for telephony.
Open dialog box, if the modem and Telephony Current Location
region code do not match.
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications
Business Law requires that you select Japan region mode. It is illegal to
use the modem in Japan with any other selection.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-20
TOSHIBA TE2300
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected
If you use a storage device such as a DVD-ROM drive, CD-RW/DVD-ROM
drive or HDD connected to a 16-bit PC card, you might experience the
following modem problems:
1. Modem speed is slow or communication is interrupted.
2. Skips may occur in sound.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out
the connector.
2. Disconnect the cable from the computer in the same manner.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-21
TOSHIBA TE2300
Wireless LAN
The Wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum radio technology that complies with IEEE
802.11 Wireless LAN standard (Revision A or B) and Turbo Mode. It
supports the following features:
■ Automatic Transmit Rate Select mechanism in the transmit range of
54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (Revision A)
■ Automatic Transmit Rate Select mechanism in the transmit range of
11, 5.5, 2 and 1 Mbit/s. (Revision B)
■ Automatic Transmit Rate Select mechanism in the transmit range of
108, 96, 72, 48, 36, 24, 18 and 12 Mbit/s. (Turbo Mode)
■ Frequency Channel Selection (Revision A/Turbo Mode: 5 GHz,
Revision B: 2.4 GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wired Equivalent Privacy (WEP) data encryption, based on the 152 bit
RC4 encryption algorithm.
■ Advanced Encryption Standard (AES) data encryption, based on the
256 bit encryption algorithm.
Wake-up on LAN does not function on a Wireless LAN.
Radio links
You can easily establish links between two or more devices. The link is
maintained even if the devices are not within line of sight.
Security
Two advanced security mechanisms ensure a high level of security:
1. Authentication prevents access to critical data and makes it
impossible to falsify the origin of a message.
2. Encryption prevents eavesdropping and maintains link privacy.
Wireless communication switch
You can enable or disable Wireless LAN functions, with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the
switch toward the left of the computer to turn it on and toward the right of
the computer to turn it off.
Set the switch to off in airplanes and hospitals. Check the indicator. It will
stop glowing when the wireless communication function is off.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-22
TOSHIBA TE2300
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
Indicator status Indication
Indicator off Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Indicator glows Wireless communication switch is on.
Wireless LAN is turned on by an application.
If you used the Task Bar to disable W-LAN, restart the computer or follow
the procedures below to enable the system to recognize W-LAN. Open or
click the following: start, Control Panel, System, Hardware, Device
Manager, Network adapters, TOSHIBA Wireless LAN Mini PCI Card
and enable.
LAN
The computer has built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second,
100BASE-Tx).
This section describes how to connect/disconnect to a LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Connecting a LAN cable
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-
TX), be sure to connect with a category 5 cable, CAT5, or higher.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T),
connect with a category 3 cable, CAT3, or higher.
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
connected to the computer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-23
TOSHIBA TE2300
2. Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check
with your LAN administrator before connecting to a hub.
When the computer is exchanging data with the LAN, the LAN active
indicator glows orange. When the computer is connected to a LAN hub
but is not exchanging data, the Link indicator glows green.
Disconnecting a LAN cable
To disconnect the LAN cable, follow the steps below.
Make sure the LAN active indicator (orange LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer’s LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-24
TOSHIBA TE2300
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of
dust and use care with liquids around the computer.
■ Be careful not to spill liquids into the computer. If the computer does
get wet, turn the power off immediately and let the computer dry
completely before you turn it on again.
■ Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-
free operation.
■ Make sure all disk activity has ended before moving the computer.
Check the Disk and Slim Select Bay indicators on the computer.
■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is
securely closed.
■ Turn off the power to the computer.
■ Disconnect the AC adaptor and all peripherals before moving the
computer.
■ Close the display. Do not pick up the computer by its display panel.
■ Close all port covers.
■ Use the carrying case when transporting the computer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-25
TOSHIBA TE2300
Heat dispersal
To protect from overheating, the CPU has an internal temperature sensor.
If the computer’s internal temperature rises to a certain level, the cooling
fan is turned on or the processing speed is lowered. You can select
whether to control the CPU temperature by turning on the fan first, then if
necessary, lowering the CPU speed. Or, by lowering the CPU speed first,
then if necessary, turning on the fan. Use the Cooling Method item of the
Power Save Mode window in TOSHIBA Power Saver.
Maximum Performance Turn on the fan first, then if necessary, lower the
CPU processing speed.
Performance Use a combination of the fan and lowering the CPU
processing speed.
Battery optimized Lower the CPU processing speed first, then if
necessary turn on the fan.
When the CPU temperature falls to a normal range, the fan is turned off
and the CPU operation returns to standard speed.
If the CPU temperature reaches an unacceptably high level with either
setting, the system automatically shuts down to prevent damage. Data in
memory will be lost.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
5-26
TOSHIBA TE2300
5. Chapter 5
The Keyboard
The computer’s keyboard layouts are compatible with a 101/102-key
enhanced keyboard. By pressing some keys in combination, all the
101/102-key keyboard functions can be executed on the computer.
The number of keys on your keyboard depends on which country/region’s
keyboard layout your computer is configured with. Keyboards for
numerous languages are available.
There are five types of keys: typewriter keys, keypad overlay, function
keys, soft keys and cursor control keys.
Typewriter keys
The typewriter keys, produce the upper- and lowercase letters, numbers,
punctuation marks, and special symbols that appear on the screen.
There are some differences, however, between using a typewriter and
using a computer keyboard:
■ Letters and numbers produced in computer text vary in width.
Spaces, which are created by a “space character,” may also vary
depending on line justification and other factors.
■ The lowercase l (el) and the number 1 (one) are not interchangeable on
computers as they are on a typewriter.
■ The uppercase O (oh) and the 0 (zero) are not interchangeable.
■ The Caps Lock function key locks only the alphabetic characters in
uppercase while the shift lock on a typewriter places all keys in the
shifted position.
■ The Shift keys, the Tab key, and the Bk Sp (backspace) key perform
the same function as their typewriter counterparts but also have
special computer functions.
TOSHIBA TE2300
User’s Manual 5-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-2
TOSHIBA TE2300
F1 … F12 function keys
The function keys, not to be confused with Fn, are the 12 keys at the top
of your keyboard. These keys are dark gray, but function differently from
the other dark gray keys.
F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn
key, keys marked with icons execute specific functions on the computer.
See the section, Soft keys: Fn key combinations, in this chapter. The
function executed by individual keys depends on the software you are
using.
Soft keys: Fn key combinations
The Fn (function) is unique to Toshiba computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Resume feature.
Emulating keys on enhanced keyboard
A 101-key enhanced keyboard layout
The keyboard is designed to provide all the features of the 101-key
enhanced keyboard, shown in the figure above. The 101/102-key
enhanced keyboard has a numeric keypad and scroll lock key. It also has
additional Enter, Ctrl and Alt keys to the right of the main keyboard.
Since the keyboard is smaller and has fewer keys, some of the enhanced
keyboard functions must be simulated using two keys instead of one on
the larger keyboard.
Your software may require you to use keys that the keyboard does not
have. Pressing the Fn key and one of the following keys simulates the
enhanced keyboard’s functions.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-3
TOSHIBA TE2300
Press Fn + F10 or Fn + F11 to access the integrated keypad. When
activated, the keys with white markings on the bottom edge become
numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer
to the Keypad overlay section in this chapter for more information on how
to operate these keys. The power on default for both settings is off.
Press Fn + F12 (ScrLock) to lock the cursor on a specific line. The power
on default is off.
Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric
keypad.
Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key.
Press Fn + Alt to simulate the enhanced keyboard’s right Alt key.
Hotkeys
Hotkeys (Fn + a function or Esc key) let you enable or disable certain
features of the computers.
Sound mute: Pressing Fn + Esc in a Windows environment turns sound
on or off. When you press these hotkeys, the current setting will be
displayed as an icon.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-4
TOSHIBA TE2300
Instant security: Press Fn + F1 to lock the keyboard and blank the
screen to prevent others from accessing your data. To restore the screen
and original settings, press any key or move the AccuPoint II. When a
dialog box appears, enter the screensaver password and click OK. If no
password is set, the screen will be restored when you press any key.
Power save mode: Pressing Fn + F2 changes the power save mode.
If you press Fn + F2, the Power Save Mode is displayed in a dialog box.
Continue holding down Fn and press F2 again to change the setting. You
can also change this setting through the Plugged in or Running on
batteries item of the Power Saver Properties window in Power Saver.
Standby: When you press Fn + F3, the computer can enter Standby. To
avoid entering Standby unexpectedly, a dialog box appears for
verification. However, if you check the checkbox in the dialog box, it will
not appear from the next time.
Hibernation: When you press Fn + F4, the computer can enter
Hibernation. To avoid entering Hibernation unexpectedly, a dialog box
appears for verification. However, if you check the checkbox in the dialog
box, it will not appear from the next time.
Display selection: Press Fn + F5 to change the active display device.
When you press these hot keys a dialog box appears. Only selectable
devices will be displayed. Hold down Fn and press F5 again to change
the device. When you release Fn and F5, the selected device will change.
If you hold down the keys for three seconds the selection will return to
LCD.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-5
TOSHIBA TE2300
Display Brightness: Pressing Fn + F6 decreases the display brightness
in increments. When you press these hotkeys, the current setting will be
displayed for two seconds by an icon. You can also change this setting
through the Monitor brightness item of the Power Save Mode window in
Power Saver.
Display Brightness: Pressing Fn + F7 increases the display brightness in
increments. When you press these hotkeys, the current setting will be
displayed for two seconds by a pop-up icon. You can also change this
setting through the Monitor brightness item of the Power Save Mode
window in Power Saver.
You cannot change the display brightness for about 18 seconds after the
LCD turns on. To protect display quality, the brightness level is set at the
maximum value.
Wireless setting: Non functioning key combination.
Emulating Fn key on external keyboard
The Fn key is only on Toshiba keyboards. If you use an external keyboard
attached to the computer, you can execute Fn key combinations by
emulating the Fn key. See Chapter 7, HW Setup and Passwords, for
details on setting the Fn key equivalent.
Fn Sticky key
You can use the Toshiba Accessibility Utility to make the Fn key sticky,
that is, you can press it once, release it, and they press an “F number”
key.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-6
TOSHIBA TE2300
Windows special keys
The keyboard provides two keys that have special functions in Windows :
one activates the Start menu and the other has the same function as the
secondary mouse button.
This key activates the Windows Start menu.
This key has the same function as the secondary mouse button.
Keypad overlay
Your computer’s keyboard does not have an independent numeric
keypad, but its numeric keypad overlay functions like one.
The keys in the center of the keyboard with white letters make up the
numeric keypad overlay. The overlay provides the same functions as the
numeric keypad on the 101/102-key enhanced keyboard in the next
figure.
Turning on the overlays
The numeric keypad overlay can be used for numeric data input or cursor
and page control.
Arrow mode
To turn on the Arrow mode, press Fn + F10. The Arrow mode indicator
lights. Now try cursor and page control using the keys shown in next
figure. Press Fn + F10 again to turn off the overlay.
Numeric mode
To turn on the Numeric mode, press Fn + F11. The Numeric mode
indicator lights. Now try numeric data entry using the keys in the next
figure. Press Fn + F11 again to turn off the overlay.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-7
TOSHIBA TE2300
The numeric keypad overlay
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:
1. Hold Fn and press any other key. All keys will operate as if the
overlay were off.
2. Type uppercase characters by holding Fn + Shift and pressing a
character key.
3. Release Fn to continue using the overlay.
Temporarily using overlay (overlay off)
While using the normal keyboard, you can temporarily use the keypad
overlay without turning it on:
1. Press and hold down Fn.
2. Check the keyboard indicators. Pressing Fn turns on the most
recently used overlay. If the Numeric mode indicator lights, you can
use the overlay for numeric entry. If the Arrow mode indicator lights,
you can use the overlay for cursor and page control.
3. Release Fn to return to normal keyboard operation.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
5-8
TOSHIBA TE2300
Temporarily changing modes
If the computer is in Numeric mode, you can switch temporarily to Arrow
mode by pressing a shift key.
If the computer is in Arrow mode, you can switch temporarily to Numeric
mode by pressing a shift key.
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII
codes.
With the overlay on:
1. Hold down Alt.
2. Using the overlay keys, type the ASCII code.
3. Release Alt, and the ASCII character appears on the display screen.
With the overlay off:
1. Hold Alt + Fn.
2. Using the overlay keys, type the ASCII code.
3. Release Alt + Fn, and the ASCII character appears on the display
screen.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
The Keyboard
6-1
TOSHIBA TE2300
6. Chapter 6
Power and Power-Up Modes
The computer’s power resources include the AC adaptor and internal
batteries. This chapter gives details on making the most effective use of
these resources including charging and changing batteries, tips for saving
battery power, and power up modes.
Power conditions
The computer’s operating capability and battery charge status are
affected by the power conditions: whether an AC adaptor is connected,
whether a battery is installed and what the charge level is for the battery.
Power on Power off (no operation)
Main battery fully
charged
• Operates
• No charge
• LED: Main Battery green
DC IN green
• No charge
• LED: Main Battery green
DC IN green
Main battery
partially charged
or no charge
• Operates
• Charge*1
• LED: Main Battery orange
DC IN green
• Quick charge*1
• LED: Main Battery orange
DC IN green
AC adaptor
connected
No main battery
installed
• Operates
• No charge
• LED: Main Battery off
DC IN green
• No charge
• LED: Main Battery off
DC IN green
TOSHIBA TE2300
User’s Manual 6-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-2
TOSHIBA TE2300
Power on Power off (no operation)
2nd battery fully
charged
• Operates
• No charge
• LED: 2nd battery green
DC IN green
• No charge
• LED: 2nd battery green
DC IN green
2nd battery
partially charged
or no charge
• Operates
• Charge*2
• LED: 2nd battery orange
DC IN green
• Quick charge*2
• LED: 2nd battery orange
DC IN green
AC adaptor
connected
No 2nd battery
installed
• Operates
• No charge
• LED: 2nd battery off
DC IN green
• No charge
• LED: 2nd battery off
DC IN green
Main battery
charge is above
low battery tri
gg
er
point
• Operates
• LED: Main Battery off
DC IN off
–
Main battery
charge is below
low battery tri
gg
er
point
• Operates
• LED: Main Battery
flashes orange
DC IN off
–
Main battery
charge is
exhausted
Computer shuts down*3 –
AC adaptor
not
connected
No main battery
installed
• No operation*4
• LED: Main Battery off
DC IN off
–
2nd battery
charge is above
low battery tri
gg
er
point
• Operates
• LED: 2nd battery off
DC IN off
–
2nd battery
charge is below
low battery tri
gg
er
point
• Operates
• LED: 2nd battery
flash orange
DC IN off
–
2nd battery
charge is
exhausted
Computer shuts down*3 –
AC adaptor
not
connected
No 2nd battery is
installed
• No operation*5
• LED: 2nd battery off
DC IN off
–
2nd battery indicator refers to the Slim Select Bay indicator when a
secondary battery is installed.
*1 When the secondary battery is not charging.
*2 When the main battery is not charging
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-3
TOSHIBA TE2300
*3 For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate window and the Battery Alarm item of the Alarm window. If
a main battery and a secondary battery are installed, the computer
does not shut down until the charge in both batteries is exhausted.
*4 When no secondary battery is installed
*5 When no main battery is installed
When batteries are charged, the main battery is charged first. When it is
fully charged, the secondary battery is charged.
Power indicators
The Main battery, Slim Select Bay, DC IN and Power indicators on the
system indicator panel alert you to the computer’s operating capability
and battery charge status.
Battery indicators
Check the Main battery indicator to determine the status of the main
battery and the Slim Select Bay indicator to determine the status of the
secondary battery. The following indicator lights indicate the battery
status:
Flashing orange The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Orange Indicates the AC adaptor is connected and
charging the battery.
Green Indicates the AC adaptor is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.
If the battery becomes too hot while it is being charged, the charge will
stop and the battery indicator will go out. When the battery’s temperature
falls to a normal range, charge will resume. This event occurs regardless
of whether the power to the computer is on or off.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-4
TOSHIBA TE2300
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adaptor connected:
Green Indicates the AC adaptor is connected and
supplying proper power to the computer.
Flashing orange Indicates a problem with the power supply. Plug
the AC adaptor into another outlet. If it still does
not operate properly, see your dealer.
No light Under any other conditions, the indicator does
not light.
Power indicator
Check the Power indicator to determine the power status.
Green Indicates power is being supplied to the
computer and the computer is turned on.
Blinking orange Indicates the power was turned off while the
computer was in Resume mode. The indicator
turns on for one second and turns off for two
seconds.
No light Under any other conditions, the indicator does
not light.
Battery types
The computer has three types of batteries:
■ Battery packs — main and secondary (option)
■ Real Time Clock (RTC) battery
Main battery
When the AC power cord is not connected, the computer’s main power
source is a removable lithium ion battery pack, also referred to in this
manual as the main battery. You can purchase additional battery packs
for extended use of the computer away from an AC power source.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as
required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
The main battery recharges the RTC batteries. The main battery maintains
the state of the computer when you enable Resume.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-5
TOSHIBA TE2300
When the computer is powered off in Resume mode, and the AC adaptor
in not connected, the main battery pack and optional secondary battery
pack supply power to maintain data and programs in memory. If the
battery pack(s) is completely discharged, Resume does not function and
the computer loses all data in memory.
The following message appears when you turn on the power:
WARNING: RESUME FAILURE.
PRESS ANY KEY TO CONTINUE.
To ensure that the battery pack maintains its maximum capacity, operate
the computer on battery power at least once a month until the battery
pack is fully discharged. Refer to Extending battery life in this chapter for
procedures. If the computer is continuously operated on AC power, either
through an AC adaptor or a docking station for an extended period, more
than a month, the battery may fail to retain a charge. It may not function
efficiently over the expected life of the battery and the Battery LED may
not indicate a low-battery condition.
Secondary battery (option)
An optional secondary battery can be installed in the Slim Select Bay to
increase your battery operating time. Note the caution on Resume mode
in the previous section Main battery.
The secondary battery pack is a lithium ion battery, which can explode if
not properly replaced, used, handled or disposed of. Dispose of the
battery as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
Real time clock battery
The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this
data and the real time clock and calendar stop working. The following
message appears when you turn on the power:
Check system. Then press [F1] key . . . .
The computer’s RTC battery is a lithium ion battery and should be
replaced only by your dealer or by a TOSHIBA service representative. The
battery can explode if not properly replaced, used, handled or disposed
of. Dispose of the battery as required by local ordinances or regulations.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-6
TOSHIBA TE2300
Care and use of the battery pack
The battery pack is a vital component of portable computing. Taking
proper care of it will help ensure longer operating time on battery power
as well as a longer life for your battery pack. Follow the instructions in this
section carefully to ensure safe operation and maximum performance.
Safety precautions
Mishandling of batteries can cause death, serious injury or
property damage. Carefully observe the following advisories :
Danger: Indicates an imminently hazardous situation, which
could result in death or serious injury, if you do not follow
instructions.
Warning: Indicates a potentially hazardous situation, which could
result in death or serious injury, if you do not follow instructions.
Caution: Indicates a potentially hazardous situation, which if not
avoided, may result in moderate or minor injury or property
damage.
Note: Provides important information.
Danger
1. Never try to dispose of the battery pack by burning or expose it to a
heating device such as a microwave oven. The battery pack could
explode and cause bodily injury.
2. Never try to disassemble, repair or otherwise tamper with a battery
pack. The battery pack will overheat and ignite. Leakage of caustic
alkaline solution or other electrolytic substances will cause fire or
injury, possibly resulting in death or serious injury.
3. Never short-circuit the battery pack by contacting the terminals with
a metal object. A short-circuit can cause fire or otherwise damage
the battery pack and possibly cause injury. To avoid accidental
short-circuit, always wrap the battery pack in plastic and cover the
terminals with electrical tape when storing or disposing of the
battery pack.
4. Never puncture the battery pack with a nail or other sharp object.
Never strike it with a hammer or other object. Never step on it.
5. Never try to change the battery pack in any manner other than that
described in user's manual. Never connect the battery pack to a
plug socked or to a automobile's cigarette lighter socket. It may
rupture or ignite.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-7
TOSHIBA TE2300
6. Use only the battery pack supplied with the computer or other
device or an battery pack approved by the computer or device's
manufacturer. Battery packs have different voltages and terminal
polarities. Use of an improper battery could cause smoke, fire or
rupture of the battery pack.
7. Never subject a battery pack to heat, such as storage near a heat
source. Exposure to heat can cause the battery pack to ignite,
explode or leak caustic liquid and cause death or serious injury. It
could also fail or malfunction causing data loss.
8. Never expose the battery pack to abnormal shock, vibration or
pressure. The battery pack's internal protective device will fail,
causing it to overheat, explode, ignite or leak caustic liquids possibly
resulting in death or serious injury.
9. Never let a battery pack become wet. A wet battery pack will
overheat, ignite or rupture possibly resulting in death or serious
injury.
Warning
1. Never allow caustic electrolyte fluid leaked from a battery pack to
contact your eyes, skin or clothing. If caustic electrolyte fluid should
contact your eyes, immediately wash your eyes with large amounts
of running water and seek medical attention, to help prevent eye
damage. It electrolyte fluid should contact your skin immediately
wash it under running water to prevent rash. If it contacts your
clothes, promptly remove them to prevent the fluid from contacting
your skin or eyes.
2. Immediately turn off the power, disconnect the AC adaptor and
remove the battery if any of the following events are observed in the
battery pack: offensive or unusual odor, excessive heat,
discoloration or deformation. Never use the computer again until it
has been checked by a TOSHIBA service provider. It might generate
smoke or fire, or the battery pack might rupture.
3. Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.
4. Keep the battery pack out or reach of infants and children. It can
cause injury.
Caution
1. Never continue to use a battery pack after its recharging capacity
has become impaired, or after the display of a warning message
indicating that the battery pack's power is exhausted. Continued use
of an exhausted or impaired battery pack could cause the loss of
data.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-8
TOSHIBA TE2300
2. Never dispose of battery packs with normal trash. Bring them to
your TOSHIBA dealer or to another recycling center to save
resources and prevent environmental damage. Cover the terminals
with electrical tape to prevent short-circuits, which could cause the
battery pack to ignite or rupture.
3. Use only battery packs recommended by TOSHIBA as
replacements.
4. Always make sure the battery pack is installed correctly and
securely. Otherwise, a battery pack could fall out and possibly cause
injury.
5. Change the battery pack only in an ambient temperature between 5
and 35 degrees Celsius. Otherwise, the electrolyte solution might
leak, battery pack performance might deteriorate and the battery life
might be shortened.
6. Be sure to monitor the remaining battery power. If the battery pack
and real time clock battery discharge completely. Standby and
Suspend will not function and data in memory will be lose. Also, the
computer might register an incorrect time and date. In this case,
connect the AC adaptor to recharge the batteries.
7. Never install or remove the battery pack without first turning off the
power and disconnecting the AC adaptor. Never remove the battery
pack while the computer in Suspend or Standby mode. Data will be
lost.
Note
1. Never remove the battery pack while the Wake-up on LAN function
is enabled. Data will be lost. Before you remove a battery pack,
disable the Wake-up on LAN function.
2. To ensure the battery pack maintains maximum capacity, operate
the computer on battery power once a week until the battery pack is
fully discharged. Refer to the section Extending battery life in this
chapter for procedures. If the computer is continuously operated on
AC power for an extended period, more than a week, the battery
might fail to retain a charge. It might not function efficiently over the
expected life of the battery pack and Battery indicator might not
indicate a low-battery condition.
3. After the battery pack is charged, avoid leaving the AC adaptor
connected and the computer turned off for more than a few hours at
a time. Continuing to charge a fully-charged battery pack can
damage the battery.
Charging the batteries
When the power in the battery pack becomes low, the Battery indicator
flashes orange indicating that only a few minutes of battery power remain.
If you continue to use the computer while the Battery indicator flashes,
the computer enables Hibernation mode (so you don't lose data) and
automatically turns off.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-9
TOSHIBA TE2300
The computer enters Hibernate mode only if Hibernation is enabled in two
places in TOSHIBA Power Saver : the Hibernate window and the battery
Alarm item of the Alarm window.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack while it is installed in the computer, connect
the AC adaptor to the DC IN socket and plug the other end into a working
outlet.
The Battery indicator glows orange when the battery is being charged.
Use only the computer connected to an AC power source or the optional
TOSHIBA Battery charger to charge the battery pack. Do not attempt to
charge the battery pack with any other charger.
Time
The following table shows the approximate time required to fully charge a
discharged battery.
Charging time (hours)
Battery type Power on Power off
Main battery pack about 3 or longer about 3
Secondary battery pack about 3 or longer about 3
RTC battery about 8 Doesn’t charge
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer. If you make heavy use of external devices, for example, the
battery might scarcely charge at all during operation. Refer also to the
section Maximizing battery operating time.
Battery charging notice
The battery may not charge right away under the following conditions:
■ The battery is extremely hot or cold. If the battery is extremely hot, it
might not charge at all. Also, to ensure the battery charges to its full
capacity, charge the battery at room temperature of 10 to 30 C (50
to 88 F).
■ The battery is nearly completely discharged. Leave the AC adaptor
connected for a few minutes and the battery should begin charging.
The Battery indicator may show a rapid decrease in battery operating
time when you try to charge a battery under the following conditions:
■ The battery has not been used for a long time.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-10
TOSHIBA TE2300
■ The battery has completely discharged and been left in the computer
for a long time.
■ A cool battery is installed in a warm computer.
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the
power on until the power automatically shuts off.
2. Plug in the AC adaptor.
3. Charge the battery until the Battery indicator glows green.
Repeat the steps two or three times until the battery recovers normal
capacity.
Leaving the AC adaptor connected will shorten battery life. At least once a
month, run the computer on battery power until the battery is fully
discharged, then recharged the battery.
Monitoring battery capacity
Remaining battery power can be monitored in the Power Save Modes
window in Power Saver of Windows.
1. Wait at least 16 seconds after turning on the computer before trying to
monitor the remaining operating time. The computer needs this time
to check the battery’s remaining capacity and to calculate the
remaining operating time, based on the current power consumption
rate and remaining battery capacity. The actual remaining operating
time may differ slightly from the calculated time.
2. With repeated discharges and recharges, the battery’s capacity will
gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.
In this case, Power Saver Utility will indicate a 100% charge for both
the old and new battery, but the displayed estimated time remaining
will be shorter for the older battery.
Maximizing battery operating time
A battery’s usefulness depends on how long it can supply power on a
single charge.
How long the charge lasts in a battery depends on:
■ How you configure the computer, for example, whether you enable
battery-power saving options. The computer provides a battery save
mode to conserve battery power. This mode has the following options:
■ Processing speed
■ Monitor brightness
■ System standby
■ System Hibernate
■ Turn off monitor
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-11
TOSHIBA TE2300
■ Turn off hard disks
■ How often and how long you use the hard disk, CD/DVD-ROM drive
and the diskette drive.
■ How much charge the battery contained to begin with.
■ How you use optional devices, such as a PC card, to which the
battery supplies power.
■ Enabling Resume mode conserves battery power if you are frequently
turning the computer off and on.
■ Where you store your programs and data.
■ Closing the display when you are not using the keyboard saves power.
■ Operating time decreases at low temperatures.
■ The condition of the battery terminals. Make sure the battery terminals
stay clean by wiping them with a clean dry cloth before installing the
battery pack.
Retaining data with power off
When you turn off your computer with fully charged batteries, the
batteries retain data for the following approximate time periods:
Battery pack (6cell) 3 days (Resume mode)
34 days (Boot mode)
RTC battery 1 month
Extending battery life
To maximize the life of your battery pack:
■ At least once a month, disconnect the computer from a power source
and operate it on battery power until the battery pack fully discharges.
Before doing so, follow the steps below.
1. Turn off the computer’s power.
2. Disconnect the AC adaptor and turn on the computer’s power. If it
does not turn on go to step 4.
3. Operate the computer on battery power for five minutes. If the
battery pack has at least five minutes of operating time, continue
operating until the battery pack is fully discharged. If the battery
LED flashes or there is some other warning to indicate a low
battery, go to step 4.
4. Connect the AC adaptor to the computer and the power cord to a
power outlet. The DC IN LED should glow green, and the Battery
LED should glow orange to indicate that the battery pack is being
charged. If the DC IN indicator does not glow, power is not being
supplied. Check the connections for the AC adaptor and power
cord.
5. Charge the battery pack until the Battery LED glows green.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-12
TOSHIBA TE2300
■ If you have extra battery packs, rotate their use.
■ If you will not be using the system for an extended period, more than
one month, remove the battery pack.
■ Disconnect the AC adaptor when the battery is fully charged.
Overcharging makes the battery hot and shortens life.
■ If you are not going to use the computer for more than eight hours,
disconnect the AC adaptor.
■ Store spare battery packs in a cool dry place out of direct sunlight.
Replacing the battery pack
When the battery pack reaches the end of its operating life you will need
to install a new one. The life of the battery pack is generally about 500
recharges. If the Battery indicator flashes orange shortly after fully
recharging the battery, the battery pack needs to be replaced.
You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install battery packs. For the
detail about removing/installing the Slim Select Bay 2nd battery pack,
refer to Chapter 8, Optional Devices.
Removing the battery pack
To replace a discharged battery pack, follow the steps below.
1. When handling battery packs, be careful not to short circuit the
terminals. Also do not drop, hit or otherwise apply impact; do not
scratch or break the casing and do not twist or bend the battery pack.
2. Do not remove the battery pack while the computer is in Standby
mood. Data is stored in RAM, so if the computer loses power it will be
lost.
3. In Hibernation mode, data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Fixed HDD/ODD indicator to go out.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down with the back of the computer
facing you.
5. Slide the battery release latch to free the battery pack for removal,
then lift up the battery pack.
6. Pull the battery pack forward to remove it.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-13
TOSHIBA TE2300
Removing the battery pack
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as
required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
1. Be sure the computer’s power is off and all cables are disconnected.
2. Insert the battery pack.
Installing the battery pack
3. Push down the battery pack until it is firmly seated.
Starting the computer by password
If you registered a password as supervisor or user, you must enter it to
start the computer. For more information about how to set a password,
refer to Chapter 7, HW Setup and Passwords.
To start up the computer with the password, follow these steps:
1. Turn on the power as described in Chapter 3, Getting Started and
the following message appears:
BATTERY RELEASE
LATCH BATTERY PAC
K
BATTERY PAC
K
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-14
TOSHIBA TE2300
Password =
2. Enter the password.
3. Press Enter. The computer displays the message below while it
starts up.
Valid password entered, system is now starting
up.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Power-up modes
The computer has the following power-up modes:
■ Boot : Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■ Hibernation : Data in memory is saved to the hard disk.
■ Standby : Data is maintained in the computer's main memory.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hotkeys
You can use hotkeys Fn + F3 to enter Standby mode and Fn + F4 to enter
Hibernation. See Chapter 5, The Keyboard, for details.
Panel power off
You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
If the panel power off function is enabled and use Shut down Windows,
do not close the display until the shut down function is completed.
System Auto Off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or Hibernation mode
in windows.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
7-15
TOSHIBA TE2300
7. Chapter 7
HW Setup and Passwords
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup lets you configure settings for pointing devices,
display, CPU, boot priority, keyboard, USB, LAN, general, password,
device config and parallel/printer.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to
the computer.
Accessing HW Setup
Click start, click Control Panel, click Printers and Other Hardware, and
select TOSHIBA HW Setup to run HW Setup.
HW Setup window
The HW Setup window contains the following tabs: Pointing Devices,
Display, CPU, Boot Priority, Keyboard, USB, LAN, General, Password,
Device Config and Parallel/Printer.
There are also three buttons: OK, Cancel and Apply.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the
HW Setup window.
TOSHIBA TE2300
User’s Manual 7-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-2
TOSHIBA TE2300
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.
Setup
This field displays BIOS Version and date.
Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered Change or remove the password. (Default)
Registered Set the password. A dialogue box will appear to
let you set the password.
To enter a user password:
1. Select Registered to display the following prompt:
Enter Password:
2. Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Enter Password: ****
If you click the OK button before entering the password, Not
registered will appear on the display.
3. Click the OK button. The following message appears, allowing you
to verify the password.
Verify Password:
4. If character strings match, the password is registered click OK
button.
If they do not match, the following message appears. You must
repeat from step 1.
Entry Error!!!
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-3
TOSHIBA TE2300
2. Enter the currently registered password. The character string you
enter is displayed as a string of asterisks.
Enter Password: ****
If you click the OK button before entering the password, Registered
will appear on the display.
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
Not registered
If they do not match, the following message appears. You must
repeat step 1.
Incorrect Password!!!
If you enter the password incorrectly three times in a row, the computer
needs to shut down.
You will not be able to access the password option in HW Setup. In this
case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described earlier in this section to set a
new user password.
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can
control.
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
Standard
Bi-directional
This setting should be used with some other
parallel devices.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-4
TOSHIBA TE2300
Pointing Devices
Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint II is disabled.
Otherwise, the AccuPoint II is enabled. (Default)
Simultaneous Enables both the AccuPoint II and a PS/2
mouse.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and external
monitor for simultaneous display.
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary. (Default)
Always High CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
Always Low CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-5
TOSHIBA TE2300
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
HDD −> FDD −> CD
-ROM(-> LAN)
The computer looks for bootable files in the
following order: HDD, diskette drive, CD-ROM*
and LAN. (default)
FDD −> HDD −> CD
-ROM(-> LAN)
The computer looks for bootable files in the
following order: diskette drive, HDD, CD-ROM*
and LAN.
HDD −> CD-ROM
(-> LAN)-> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM*, LAN and
diskette drive.
FDD −> CD-ROM
(-> LAN)-> HDD
The computer looks for bootable files in the
following order: diskette drive, CD-ROM*, LAN
and HDD.
CD-ROM(-> LAN)
-> HDD −> FDD
The computer looks for bootable files in the
following order: CD-ROM*, LAN, HDD, diskette
drive.
CD-ROM(-> LAN)
-> FDD −> HDD
The computer looks for bootable files in the
following order: CD-ROM*, LAN, diskette drive
and HDD.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U Selects the USB diskette drive.
N Selects the Network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
C Selects the CD-ROM*.
This procedure does not affect the settings.
* In this computer, CD refers to the DVD-ROM, CD-RW/DVD-ROM
drives, or DVD Multi drives.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons:
Built-in HDD, Select Bay HDD, CD-ROM, FDD, Network (LAN).
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-6
TOSHIBA TE2300
A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight boot device you want and
press Enter.
1. If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
2. The selection method above does not change the boot priority
settings in HW Setup.
3. If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
HDD Priority Options
This option lets you set the boot priority for the HDD if more than one is
installed in the computer. If the first detected HDD has a boot command,
the system will boot from the HDD.
Built-in HDD ->
Second HDD
The built-in HDD is checked first for the boot
command, then the HDD installed in the Slim
Select Bay. (Default)
Second HDD ->
Built-in HDD
The HDD installed in the Slim Select Bay is
checked first for the boot command, then the
built-in HDD.
Keyboard
External Keyboard Fn key
Use this option to set a key combination on an external keyboard to
emulate the Fn key on the computer’s internal keyboard. Setting an Fn
key equivalent will let you use “Hotkeys” by pressing the set combination
instead of the Fn key. (PS/2 keyboard only)
Disabled No Fn key equivalent (Default)
Fn Equivalent Left Ctrl + Left Alt
Right Ctrl + Right Alt
Left Alt + Left Shift
Right Alt + Right Shift
Left Alt + Caps Lock
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-7
TOSHIBA TE2300
If you select Left Ctrl + Left Alt or Right Ctrl + Right Alt for this option,
you cannot use the selected keys to reboot the computer in combination
with the Del key. For example, if you select Left Ctrl + Left Alt, you must
use Right Ctrl, Right Alt and Del to reboot the computer. Left Ctrl, Left
Alt and Del cannot be used.
Wake-up on Keyboard
When this feature is enabled and the computer is in standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled Enables Wake-up on Keyboard.
Disabled Disables Wake-up on Keyboard. (Default)
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation.
If your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy
Emulation item to Enabled.
Enabled Enables the USB KB/Mouse Legacy Emulation.
(Default)
Disabled Disables the USB KB/Mouse Legacy Emulation.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled Enables the USB-FDD Legacy Emulation.
(Default)
Disabled Disables the USB-FDD Legacy Emulation.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN. (Default)
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
7-8
TOSHIBA TE2300
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Built-in LAN
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
HW Setup and Passwords
8-9
TOSHIBA TE2300
8. Chapter 8
Optional Devices
Optional devices can expand the computer’s capabilities and its
versatility. The following optional devices are available from your
TOSHIBA dealer:
Cards/memory
■ PC cards
■ Memory expansion
Power devices
■ Additional battery pack
■ Slim Select Bay 2nd battery pack
■ Additional AC adaptor
Peripheral devices
■ Slim Select Bay HDD adaptor
■ USB FDD Kit
■ Advanced Port Replicator II
■ Parallel printer
■ External monitor
■ Tele v i s i o n
■ PS/2 mouse
■ PS/2 keyboard
Other
■ Security lock
TOSHIBA TE2300
User’s Manual 8-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-2
TOSHIBA TE2300
PC cards
The computer is equipped with a PC card expansion slot that can
accommodate two 5 mm Type II cards or one 10.5 mm Type III card. Any
PC card that meets industry standards (manufactured by TOSHIBA or
other vendor) can be installed. The slots support 16-bit PC cards,
including PC card 16’s multifunction card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
Installing a PC card
Two PC card connectors are located one above the other on the left side
of the computer. Both connectors are accessed from the same slot. You
can install two Type II cards, one in each connector, or one Type III card in
the bottom connector.
Windows’ hot-install feature lets you install PC cards while the computer’s
power is on.
1. Do not install a PC card while the computer is in standby or
hibernation mode. Some cards might not work properly.
2. An HDD or CD-ROM connected to a 16-bit PC card, might affect the
performance of the computer’s sound system and data transmission,
including slower transmission speeds and dialing errors.
To install a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Inserting the PC card
3. Check the configuration in the HW Setup window to make sure it is
appropriate for your card.
PC CARD
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-3
TOSHIBA TE2300
Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safety Remove Hardware icon on the system tray and
disable the PC card.
2. Press the eject button of the PC card you want to remove to extend
the button.
3. Press the extended eject button to pop the card out slightly.
4. Grasp the PC card and remove it.
Removing the PC card
Memory expansion
You can install additional memory in the computer’s memory module to
increase the amount of RAM.
Only memory modules with the following parts numbers can be installed:
■ PA3127U-1M25 256 MB
■ PA3164U-1M51 512MB
■ PA3278U-1M1G 1024MB
Installing memory module
To install a memory module, make sure the computer is in boot mode
then:
1. Turn the computer off in boot mode. Refer to the Turning off the
power section in Chapter 3.
PC CARD
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-4
TOSHIBA TE2300
1. If you use the computer for a long time, the memory modules will
become hot. In this case, let the memory modules cool to room
temperature before you replace them.
2. Do not try to install a memory module with the computer turned on or
turned off in Standby and Hibernation mode. You can damage the
computer and the memory module.
3. If you install a memory module that is not compatible with the
computer, a beep will sound when you turn on the power. If the
module is installed in slot A, there will be a long beep followed by a
short beep. If the module is in slot B, there will be a long beep
followed by two short beeps. In this case shut down the power and
remove the incompatible module.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer
to Chapter 6, Power and Power-Up Modes.)
4. Remove one screw securing the memory module cover.
5. Lift off the cover.
Use a point size 0 Phillips screwdriver.
Removing the cover
6. Insert the memory module into the connector on the computer.
Press the module carefully and firmly to ensure a solid connection.
7. Push the module down so that it lies flat and is secured by two
latches.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-5
TOSHIBA TE2300
Inserting the memory module
8. Seat the cover and secure it with one screw.
9. When you turn the computer on, it should automatically recognize
the total memory capacity. Use the HW Setup program to verify that
the added memory is recognized. If it is not recognized, check the
module’s connection.
Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Turn the computer off and remove all cables connected to the
computer.
1. If you use the computer for a long time, the memory modules will
become hot. In this case, let the memory modules cool to room
temperature before you replace them.
2. Do not try to remove a memory module with the computer turned on
or turned off in Standby and Hibernation mode. You can damage the
computer and the memory module.
2. Turn the computer upside down and remove the battery pack (refer
to Chapter 6, Power and Power-Up Modes.)
3. Remove one screw securing the memory module cover.
4. Lift off the cover.
5. Use a slender object such as a pen to press two latches on either
side of the memory module to the outside. The memory module will
pop up.
6. Grasp the memory module by the sides and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-6
TOSHIBA TE2300
Removing the memory module
7. Seat the cover and secure it with one screw.
Additional battery pack
You can increase the portability of the computer with additional battery
packs (PA3286*). If you’re away from an AC power source, you can
replace a low battery with a fully charged one. See Chapter 6, Power and
Power-Up Modes.
Slim Select Bay 2nd battery pack
You can install a secondary battery pack (PA3249*) in the computer’s Slim
Select Bay. For details on installing modules in the Slim Select Bay, refer
to Chapter 4, Operating Basics.
Additional AC adaptor
If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load: PA3083*.
Slim Select Bay HDD adaptor
A integrated 2 1/2" HDD is available for installation in the Slim Select Bay.
To install an HDD in the Slim Select Bay HDD adaptor (PA3134U-1ETC)
follow the steps below.
1. Slide the lock to the unlock position and open the lid.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-7
TOSHIBA TE2300
Opening the lid
2. Insert the HDD and push forward to ensure a firm connection.
Installing the HDD
3. Close the lid and slide the lock to the lock position.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-8
TOSHIBA TE2300
Closing the lid
For details on installing the Slim Select Bay HDD adaptor in the Slim
Select Bay, refer to Chapter 4, Operating Basics.
USB FDD Kit
The 3 1/2" external FDD drive module can be connected to the USB port.
For details on connecting the 3 1/2" external diskette drive module, refer
to Chapter 4, Operating Basics.
Advanced Port Replicator II
In addition to the ports available on the computer, the Advanced Port
Replicator II provides audio line-out jack, line-in jack and separate ports
for PS/2 mouse and PS/2 keyboard. The Advanced Port Replicator II
connects directly to the docking interface on the bottom of the computer.
The AC adaptor connects the Advanced Port Replicator II to a power
source.
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
The following ports and accessories are available on the Advanced Port
Replicator II.
■ One RJ45 LAN jack
■ One RJ11 Modem jack
■ External monitor port
■ Parallel port
■ Serial port
■ PS/2 mouse port
■ PS/2 keyboard port
■ DC IN socket
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-9
TOSHIBA TE2300
■ Security lock slot
■ Audio line-in, line-out jacks
■ Universal Serial Bus (two) ports
■ i.LINK (IEEE 1394) port (This port is not supported by the computer.)
■ DVI port (This port is not supported by the computer.)
1. When a Port Replicator is connected to the computer, remove all
cables connected to the computer.
2. The TE2300 does not support the DVI and i.LINK ports on the
Advanced Port Replicator II.
Parallel printer
You can connect any standard Centronics-compatible parallel printer to
your computer. All you need is an IBM PC™ parallel printer cable. Your
dealer can supply one or you can purchase one at most computer stores.
The cable’s connectors are designed so that it is impossible for you to
connect them incorrectly. You can also connect a parallel printer to an
optional Advanced Port Replicator. To connect a printer, follow these
steps:
1. Turn off the computer.
2. Insert one end of the cable into the computer’s parallel port.
3. Tighten the screws that fasten the cable connector to the
computer’s parallel port.
4. Insert the other end of the cable into the printer’s parallel connector.
5. Fasten the connector to the printer with the clips on the parallel port.
6. Turn on the printer.
7. Turn on the computer.
8. Start the Hardware Setup program. Refer to Chapter 7 HW Setup
and Passwords.
9. Select the Parallel/Printer tab from the TOSHIBA HW Setup
window.
10. Set the Parallel Port Mode and press OK.
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows Add Print Wizard. To access the Add
Print Wizard utility, click Start, point to Settings, click Printers
and double click the Add Printer icon.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-10
TOSHIBA TE2300
External monitor
An external analog monitor can be connected to the external monitor port
on the computer, Port Replicator. The computer supports VGA and Super
VGA video modes. To connect a monitor, follow the steps below.
If an external monitor is connected to the computer, do not connect the
Port Replicator. First disconnect the external monitor from the computer
then connect the Port Replicator and use its external monitor port.
The Resume feature can be used with an external monitor. Simply enable
Resume and the computer will maintain the data as it is displayed on the
external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and
Simultaneous displays. Refer to Chapter 7, HW Setup and Passwords.
If you have selected Simultaneous under the Display options of the
HW Setup, both the external monitor and the internal LCD will be active
when you turn on the computer. If Auto-Selected is selected, only the
external monitor will be active.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 5, The Keyboard, for
details on using hotkeys to change the display setting.
If you set Simultaneous for the computer’s display, you must set the
computer’s display resolution to the same as that of the external monitor
or other device, such as a projector.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-11
TOSHIBA TE2300
Television
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the
video out port.
Connecting a television
3. Turn the television on.
4. Turn the computer on.
PS/2 mouse
Use the PS/2 keyboard/mouse port on the computer or optional
Advanced Port Replicator to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2
mouse port. If the mouse’s cable is not compatible, see your dealer for an
adaptor cable.
1. How the computer treats the connection to a PS/2 mouse depends on
the setting for Pointing Devices under the HW Setup program. If
Simultaneous is selected, you can operate both the AccuPoint II
and the PS/2 mouse. If Auto-Selected is chosen, the AccuPoint II
is disabled when a PS/2 mouse is connected.
2. If you connect a PS/2 mouse to the computer while it is in Standby
mode, you will not be able to use the mouse when you turn the
computer on.
To connect a PS/2 mouse:
1. Turn the computer off.
2. Connect the PS/2 mouse to the PS/2 keyboard/mouse port on the
computer or the mouse port on the optional Advanced Port
Replicator, pressing gently to assure a firm connection.
3. Turn on the computer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-12
TOSHIBA TE2300
To disconnect the mouse, turn off the computer and pull out the mouse
connector.
Consult your mouse manual for instructions on how to install necessary
software.
PS/2 keyboard
Use the PS/2 keyboard/mouse port on the computer or optional
Advanced Port Replicator to connect a PS/2 keyboard. When an external
keyboard is connected, you can use both the external keyboard and the
computer’s internal keyboard. To connect a PS/2 keyboard:
If you connect a PS/2 keyboard to the computer while it is in Standby
mode, you will not be able to use the keyboard when you turn the
computer on.
1. Turn the computer off.
2. Plug the PS/2 keyboard connector into the PS/2 keyboard/mouse
port on the computer or the keyboard port on the optional Advanced
Port Replicator, pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the keyboard, turn off the computer and pull out the
keyboard connector.
Security lock
A security lock enables you to anchor your computer to a desk or other
heavy object to help prevent unauthorized removal of the computer.
Attach one end of a cable to the desk and the other end to the security
lock slot on the left side of the computer.
Security lock
9. Chapter 9
Troubleshooting
TOSHIBA designed the computer for durability. However, should
problems occur, following the procedures in this chapter can help to
determine the cause.
All readers should become familiar with this chapter. Knowing what might
go wrong can help prevent problems from occurring.
Problem solving process
Resolving problems will be much easier if you observe the following
guidelines:
■ Stop immediately when you recognize a problem exists. Further action
may result in data loss or damage. You may destroy valuable problem-
related information that can help solve the problem.
■ Observe what is happening. Write down what the system is doing and
what actions you performed immediately before the problem
occurred. If you have a printer attached, print a copy of the screen
using PrtSc.
The questions and procedures offered in this chapter are meant as a
guide, they are not definitive problem solving techniques. Many problems
can be solved simply, but a few may require help from your dealer. If you
find you need to consult your dealer or others, be prepared to describe
the problem in as much detail as possible.
Preliminary checklist
Consider the simplest solution first. The items in this checklist are easy to
fix and yet can cause what appears to be a serious problem.
■ Make sure you turn on all peripheral devices before you turn on the
computer. This includes your printer and any other external device you
are using.
■ Before you attach an external device, turn the computer off. When you
turn the computer back on it recognizes the new device.
TOSHIBA TE2300
User’s Manual 9-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-2
TOSHIBA TE2300
■ Make sure all options are set properly in the setup program.
■ Check all cables. Are they correctly and firmly attached? Loose cables
can cause signal errors.
■ Inspect all connecting cables for loose wires and all connectors for
loose pins.
■ Check that your diskette is correctly inserted and that the diskette’s
write protect tab is correctly set.
Make notes of your observations and keep them in a permanent error log.
This will help you describe your problems to your dealer. If a problem
recurs, the log will help you identify the problem faster.
Analyzing the problem
Sometimes the system gives clues that can help you identify why it is
malfunctioning. Keep the following questions in mind:
■ Which part of the system is not operating properly: keyboard, diskette
drives, hard disk drive, printer, display. Each device produces different
symptoms.
■ Is the operating system configuration set properly? Check the
configuration options.
■ What appears on the display screen? Does it display any messages or
random characters? Print a copy of the screen if you have a printer
attached. Look up the messages in the software and operating system
documentation. Check that all connecting cables are correctly and
firmly attached. Loose cables can cause erroneous or intermittent
signals.
■ Do any icons light? Which ones? What color are they? Do they stay on
or blink? Write down what you see.
■ Do you hear any beeps? How many? Are they long or short? Are they
high pitched or low? Is the computer making any unusual noises?
Write down what you hear.
Record your observations so you can describe them to your dealer.
Software The problems may be caused by your software
or diskette. If you cannot load a software
package, the media (usually a diskette) may be
damaged or the program might be corrupted. Try
loading another copy of the software.
If an error message appears while you are using
a software package, check the software
documentation. These documents usually
include a problem solving section or a summary
of error messages.
Next, check any error messages in the OS
documentation.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-3
TOSHIBA TE2300
Hardware If you cannot find a software problem, check
your hardware. First run through the items in the
preliminary checklist above. If you still cannot
correct the problem, try to identify the source.
The next section provides checklists for
individual components and peripherals.
Hardware and system checklist
This section discusses problems caused by your computer’s hardware or
attached peripherals. Basic problems may occur in the following areas:
■ System start-up
■ Self test
■ Power
■ Password
■ Keyboard
■ LCD panel
■ Hard disk drive
■ DVD-ROM drive
■ CD-RW/DVD-ROM drive
■ Diskette drive
■ Infrared port
■ Printer
■ Pointing device
■ PC card
■ Monitor
■ Sound system
■ TV output signal
■ USB
■ Modem
■ Standby/Hibernation
■ Memory Expansion
■ LAN
■ Wireless LAN
System start-up
When the computer does not start properly, check the following items:
■ Self Test
■ Power Sources
■ Power-on Password
Self test
When the computer starts up, the self-test will be run automatically, and
the following will be displayed:
In Touch with Tomorrow
TOSHIBA
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating
system. Depending on how the Boot Priority is set in the Hardware Setup,
the computer tries to load first from drive A then from drive C, or first from
drive C then from drive A.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-4
TOSHIBA TE2300
If any of the following conditions are present, the self test failed:
■ The computer stops and does not proceed to display information or
messages.
■ A beep sounds, and after a few seconds no new messages appear.
■ Random characters appear on the screen, and the system does not
function normally.
■ The screen displays an error message.
Turn off the computer and check all cable connections. If the test fails
again, contact your dealer.
Power
When the computer is not plugged into an AC adaptor, the battery pack is
the primary power source. However, your computer has a number of
other power resources, including intelligent power supply and Real Time
Clock battery. These resources are interrelated and any one could affect
apparent power problems. This section provides check lists for AC
adaptor and the main battery. If you cannot resolve a problem after
following them, the cause could lie with another power resource. In such
case, contact your dealer.
Overheating power down
If the computer’s internal temperature becomes too high, the computer
will automatically enter Hibernation or Resume mode and shut down.
Problem Procedure
Computer shuts down
and DC IN indicator
blinks orange
Leave the computer off until the DC IN indicator
stops blinking.
It is recommended to leave the computer off until
the its interior reaches room temperature even
though the DC IN indicator stops blinking.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly contact your dealer.
Computer shuts down
and its DC IN indicator
is flashing green
Indicates a problem with the heat dispersal
system. Please contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-5
TOSHIBA TE2300
AC power
If you have trouble turning on the computer with the AC adaptor
connected, check the DC IN indicator. Refer to Chapter 6, Power and
Power-Up Modes for more information.
Problem Procedure
AC adaptor doesn’t
power the computer
DC IN indicator does
not glow green)
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals.
If the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.
Battery
If you suspect a problem with the battery, check the DC IN indicator as
well as the Main battery and Slim Select Bay indicators. For information
on indicators and battery operation see Chapter 6, Power and Power-Up
Modes.
Problem Procedure
Battery doesn’t power
the computer
The battery may be discharged. Connect the AC
adaptor to charge the battery.
If the battery is completely discharged, it will not
begin charging immediately. Wait a few minutes.
If the battery still does not charge, make sure the
outlet is supplying power. Test it by plugging in
an appliance. If it doesn't work, try another
power source.
Battery doesn’t charge
when the AC adaptor is
attached (Main battery
or Slim Select Bay
indicator does not glow
orange.)
Check whether the battery is hot or cold to the
touch. If the battery is too hot or too cold, it will
not charge properly. Let it reach room
temperature.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-6
TOSHIBA TE2300
Unplug the AC adaptor and remove the battery
to make sure the terminals are clean. If
necessary wipe them with a soft dry cloth dipped
in alcohol.
Connect the AC adaptor and replace the battery.
Make sure it is securely seated.
Check the Battery indicator. If it does not glow,
let the computer charge the battery for at least
20 minutes. If the Battery indicator glows after
20 minutes, let the battery continue to charge at
least another 20 minutes before turning on the
computer.
If the indicator still does not glow, the battery
may be at the end of its operating life. Replace it.
If you frequently recharge a partially charged
battery, the battery might not charge to its full
potential. Fully discharge the battery, then try to
charge it again.
Battery doesn’t power
the computer as long as
expected
Check the power consumption settings in Power
Saver utility. Consider using a power saving
mode.
Password
Problem Procedure
Cannot enter
password
Refer to the Password section in Chapter 7, HW
Setup and Passwords.
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup
and Passwords.
Problem Procedure
Some letter keys
produce numbers
Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.
Output to screen is
garbled
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software’s documentation.
If you are still unable to use the keyboard,
consult your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-7
TOSHIBA TE2300
LCD panel
Apparent LCD problems may be related to the computer’s setup. Refer to
Chapter 7, HW Setup and Passwords, for more information.
Problem Procedure
No display Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Markings appear on the
LCD
They might have come from contact with the
keyboard or AccuPoint II. Try wiping the LCD
gently with a clean dry cloth. If markings remain,
use LCD cleaner. Be sureto let the LCD dry
before closing it.
Problems above remain
unresolved or other
problems occur
Refer to your software’s documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Hard disk drive
Problem Procedure
Check if a diskette is in the diskette drive or a
CD-ROM is in the optical media drive. Remove
any diskette and/or CD-ROM and check Boot
priority. Refer to the Boot Priority section in
Chapter 7, HW Setup and Passwords.
Computer does not
boot from hard disk
drive
There may be a problem with your operating
system files. Refer to your OS documentation.
Slow performance Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your OS documentation
or online HELP for information on running
SCANDISK and the defragmenter.
As a last resort, reformat the hard disk. Then,
reload the operating system and other files.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-8
TOSHIBA TE2300
DVD-ROM drive
For more information, refer to Chapter 4, Operating Basics.
Problem Procedure
You cannot access a
DVD in the drive
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the DVD. Make sure there is no
obstruction. Remove any foreign object.
Check whether the DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
cleaner. See the CD/DVDs care section in
Chapter 4, Operating Basics, for details on
cleaning.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the DVD/CD’s documentation.
Check the type of DVD/CD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROMXA Mode
2 (Form1,Form2), Enhanced CD(CD-
EXTRA),CD-G(Audio CD only),
Addressing Method 2
Some DVD/CDs run
correctly, but others do
not
Check the region code on the DVD. It must
match that on the DVD drive. Region codes are
listed in the DVD-ROM drive section in
Chapter 2, The Grand Tour.
DVD does not play
correctly in an optional
Expansion Station
Some video discs might not play properly in a
Expansion Station. Play the disc in the DVD-
ROM drive installed in the computer.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-9
TOSHIBA TE2300
CD-RW/DVD-ROM drive
For more information, refer to Chapter 4, Operating Basics.
Problem Procedure
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
You cannot access a
CD or DVD in the drive
Open the drawer and make sure the CD or DVD
is properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD or DVD. Make sure
there is no obstruction. Remove any foreign
object.
Check whether the DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
cleaner. See the CD/DVDs care section in
Chapter 4, Operating Basics, for details on
cleaning.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the DVD/CD’s documentation.
Check the type of DVD/CD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROMXA Mode
2 (Form1,Form2), Enhanced CD(CD-
EXTRA),CD-G(Audio CD only),
Addressing Method 2
Some DVD/CDs run
correctly, but others do
not
Check the region code on the DVD. It must
match that on the DVD drive. Region codes are
listed in the DVD-ROM drive section in
Chapter 2, The Grand Tour.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-10
TOSHIBA TE2300
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions :
■ Use only media recommended by TOSHIBA
■ Do not use the mouse or keyboard during
writing.
■ Use only the software supplied with the
computer for recording.
■ Do not run or start other software during
writing.
■ Do not jar the computer during writing.
■ Do not connect/ disconnect external devices
or install/ remove internal cards during
writing.
If problems persist, contact your dealer.
Diskette drive (optional)
For more information, refer to Chapter 4, Operating Basics.
Problem Procedure
Drive does not operate There may be a faulty cable connection. Check
the connection to the computer and to the drive.
Some programs run
correctly but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software needs.
You cannot access the
external 3 1/2" diskette
drive
Try another diskette. If you can access the
diskette, the original diskette (not the drive) is
probably causing the problem.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-11
TOSHIBA TE2300
Infrared port
Refer also to the documentation for your IrDA compatible device and
related software.
Problem Procedure
Check that the device is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Infrared devices do not
work as expected
Make sure there is no obstruction blocking
communication between the computer and the
target device.
If problems persist, contact your dealer.
Printer
Refer to the troubleshooting and other relevant sections in your printer
and software documentation.
Problem Procedure
Printer does not turn
on.
Check that the printer is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port
and a serial printer to the serial port. Make sure
the ports are configured correctly.
Computer/printer do
not communicate
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Printer error Check your printer documentation.
If problems persist, contact your dealer.
Pointing device
If you are using a PS/2 or serial mouse, also refer to Chapter 8,
Optional Devices, and to your mouse documentation. If you are using a
USB mouse, also refer to the USB section in this chapter and to your
mouse documentation.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-12
TOSHIBA TE2300
AccuPoint II
Problem Procedure
On-screen pointer
does not respond to
AccuPoint II operation
The system might be busy. If the pointer is
shaped as an hourglass, waitfor it to resum its
normal shape and try again to move it.
If a PS/2 or serial mouse is connected, check the
HW Setup window. The Pointing Device
option should be set to Simultaneous to use
both the AccuPoint II and an external PS/2
mouse.
Double-Click does not
work
Try changing the double-click speed setting in
the mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed
and click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Option tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
PS/2 mouse
Problem Procedure
On-screen pointer
does not respond to
PS/2 mouse operation
Check that the PS/2 mouse cable’s 6-pin
connector is firmly connected to the PS/2
mouse/ keyboard port.
You may have connected the mouse after turning
the computer on. Turn off the computer, make
sure the mouse is firmly connected and turn the
computer back on.
Is your software configured to recognize the
mouse? Check the software documentation.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-13
TOSHIBA TE2300
Serial mouse
This section applies only with Windows® XP operating systems.
You cannot use a serial mouse with Windows®2000.
Problem Procedure
On-screen pointer
does not respond to
serial mouse operation
Check for a firm connection between the
computer’s serial port and the cable’s 9-pin
connector.
Did you connect the mouse before turning on the
computer?
Is your software configured to recognize the
mouse? Check the software documentation.
If problems persist, contact your dealer.
USB mouse
Problem Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
On-screen pointer
does not respond to
mouse operation
Make sure the mouse is properly connected to
the USB port.
Double-clicking does
not work
Try changing the double-click speed setting in
the mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed
and click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse pointer
moves erratically
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-14
TOSHIBA TE2300
PC card
Refer also to Chapter 8, Optional Devices.
Problem Procedure
Reseat the PC card to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
PC card error occurs
Check the card’s documentation.
If problems persist, contact your dealer.
Monitor
Refer also to Chapter 8, Optional Devices, and to your monitor’s
documentation.
Problem Procedure
Monitor does not turn
on
Make sure that the external monitor’s power
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness
controls on the external monitor.
No display
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Display error occurs Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Sound system
Problem Procedure
Adjust the volume control dial.
Check the software volume settings.
No sound is heard
Make sure the headphone connection is secure.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-15
TOSHIBA TE2300
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you may have connected
to the computer.
If problems persist, contact your dealer.
TV output signal
Refer also to your Personal Conferencing Kit’s documentation.
Problem Procedure
Display on TV is poor Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
No display
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard.
If you turn the computer off in Resume mode
while the display is on TV, the computer will
select either the internal LCD or an external
computer CRT as the display device.
If problems persist, contact your dealer.
USB
Refer also to your USB device’s documentation.
Problem Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
USB device does not
work
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in HW Setup is set to Enabled.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-16
TOSHIBA TE2300
Modem
Problem Procedure
Communication
software can't
initialize modem
Make sure the computer’s internal modem
settings are correct. Refer to Phone and Modem
Options in the Control Panel.
You can hear a dial
tone but can't make a
call
If the call is going through a PBX machine, make
sure the communication application’s tone dial
detection feature is disabled.
You place a call, but a
connection can't be
made
Make sure the settings are correct in your
communications application.
After making a call
you can’t hear a ring
Make sure the tone or pulse selection in your
communications application is set correctly.
Communication is cut
off unexpectedly
The computer will automatically cut off
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
A CONNECT display
is quickly replaced by
NO CARRIER
Check the error control setting in your
communications application.
Character display
becomes garbled
during a
communication
In data transmission, make sure the parity bit
and stop bit settings correspond with those of
the remote computer.
Check the flow control and communication
protocol.
You cannot receive an
incoming call
Check the rings before auto answer setting in
your communications application.
If problems persist, contact your dealer.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-17
TOSHIBA TE2300
Standby/Hibernation
Problem Procedure
The system will not
enter
Standby/Hibernation
Is Windows Media™ Player open? The system
might not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.
LAN
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN HUB.
Wake-up on LAN
does not work
Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Problem Procedure
Cannot access
Wireless LAN
Make sure the computer’s wireless
communication switch is set to on.
If problems persist, consult your LAN
administrator.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Troubleshooting
9-18
TOSHIBA TE2300
TOSHIBA support
If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.
Before you call
Some problems you experience may be related to software or the
operating system, it is important to investigate other sources of
assistance first. Before contacting TOSHIBA, try the following:
■ Review troubleshooting sections in the documentation for software
and peripheral devices.
■ If a problem occurs when you are running software applications,
consult the software documentation for troubleshooting suggestions.
Call the software company’s technical support for assistance.
■ Consult the dealer you purchased your computer and/or software
from. They are your best sources for current information and support.
Where to write
If you are still unable to solve the problem and suspect that it is hardware
related, write to TOSHIBA at the nearest location listed Appendix C.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
A-1
TOSHIBA TE2300
Specifications
A. Appendix A
Specifications
This appendix summarizes the computer’s technical specifications.
Physical Dimensions
Size 316 (w) x 275(d) x 33.9 (front)/38.1 (back)
millimeters (does not include the thicker part of
the bottom of the computer)
Weight (typical*) 2.7kilograms (Approximate), configured with:
14"XGA display, fixed DVD-ROM drive, 256MB
memory, 40GB(5400rpm) HDD.
* Weight will vary depending on whether or not and what
kind of options are adopted.
Environmental Requirements
Conditions Ambient Relative
temperature humidity
Operating 5°C (41°F) to 35°C (95°F) 20% to 80%
Nonoperating -20°C (-4°F) to 65°C (149°F) 10% to 90%
Thermal Gradient 20°C per hour maximum
Wet-bulb temperature 26°C maximum
Conditions Altitude (from sea level)
Operating -60 to 3,000 meters
Nonoperating -60 to 10,000 meters maximum
Power Requirements
AC adaptor 100- 240 volts AC
50 or 60 hertz (cycles per second)
Computer 15 VDC
5.0 amperes
TOSHIBA TE2300
User’s Manual A-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
A-2
TOSHIBA TE2300
Specifications
Built-in Modem
Network control unit (NCU)
Type of NCU AA
Type of line Telephone line (analog only)
Type of dialing Pulse
Tone
Control command AT commands
EIA-578 commands
Monitor function Computer’s speaker
Communication specifications
Communication
system
Data: Full duplex
Fax: Half duplex
Communication
protocol
Data
ITU-T-Rec V.21/V.22/V.22bis/V.32
(Former CCITT) /V.32bis/V.34/V.90
Bell 103/212A
Fax
ITU-T-Rec V.17/V.29/V.27ter
(Former CCITT) /V.21 ch2
Communication
speed
Data transmission and reception
300/1200/2400/4800/7200/9600/12000/14400/
16800/19200/21600/24000/26400/28800/
31200/33600 bps
Data reception only with V.90
28000/29333/30666/32000/33333/34666/
36000/37333/38666/40000/41333/42666/
44000/45333/46666/48000/49333/50666/
52000/53333/54666/56000 bps
Fax
2400/4800/7200/9600/12000/14400 bps
Error correcting MNP class 4 and ITU-T V.42
Data compression MNP class 5 and ITU-T V.42bis
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
B-3
TOSHIBA TE2300
Specifications
B. Appendix B
AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country/region in which it is used. All cords must meet the following
specifications:
Length: Minimum 2 meters
Wire size: Minimum 0.75 mm2
Current rating: Minimum 2.5 Amperes
Voltage rating: 125 or 250 VAC
(depending on country/region’s power standards)
Certification agencies
U.S. and Canada: UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2 two conductor
Europe:
Austria: OVE Italy: IMQ
Belgium: CEBEC The Netherlands: KEMA
Denmark: DEMKO Norway: NEMKO
Finland: FIMKO Sweden: SEMKO
France: UTE Switzerland: SEV
Germany: VDE United Kingdom: BSI
Australia: AS Japan: DENANHO
In Europe, power cords must be VDE type, H05VVH2-F and two
conductor.
TOSHIBA TE2300
User’s Manual B-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
B-2
TOSHIBA TE2300
A
C Power Cord and Connectors
For the United States and Canada, plug configuration must be a 2-15P
(250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code
handbook and the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U.S.A. and
Canada, the United Kingdom, Australia and Europe.
USA and Canada United Kingdom
Europe Australia
UL approved
CSA approved BS approved
Approved by the appropriate agency
AS approved
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-1
TOSHIBA TE2300
A
C Power Cord and Connectors
C. Appendix C
The TOSHIBA International
Warranty
The TOSHIBA International Warranty is a service policy on the parts and
repair on your TOSHIBA portable personal computer which is
automatically available to purchasers of the computer.
The cover is assured in major industrial countries of the world. It means
that wherever you take your TOSHIBA mobile PC in this area, you will
never be left without help should any problems arise.
For more information on the warranty coverage please refer to your
warranty booklet supplied with your Notebook.
What the warranty covers
The Warranty covers the computer in the standard version, including the
AC adaptor. Batteries, modems, memory expansion kits and other
TOSHIBA branded options, as well as third party expansion boards are
NOT covered by this warranty. For information concerning warranties for
these products, please consult your dealer.
If you would like to use the international warranty, please register for this
warranty. In case no registration card for the international warranty was
bundled with your computer, please contact at the following Internet
website:
http://www.toshiba-europe.com/computers/warranty
Once your registration has been received by TOSHIBA the warranty
entitlement of your Notebook can be checked on the following Internet
website:
http://gedb.toshiba.com
On the following pages is a list of the TOSHIBA Authorised Service
Providers who can be contacted if a claim on the warranty needs to be
made.
If users need further addresses in Eastern Europe or outside Europe,
these are available from the national or European companies.
The countries to which the international warranty applies can be found
using the TOSHIBA Global ASP locator.
Click: Support, Find an Authorised Service Provider
TOSHIBA TE2300
User’s Manual C-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-2
TOSHIBA TE2300
The TOSHIBA International Warrant
y
TOSHIBA's Worldwide Computer Representatives
Australia Toshiba (Australia) Pty. Limited
84-92 Talavera Road, North Ryde NSW 2113
Tel: +61-2-9887-3322
Fax: +61-2-9888-3664
http://www.isd.toshiba.com.au
Austria Toshiba Europe GmbH
Leibnizstr. 2
93055 Regensburg
Tel: 0800-29 74 88
Fax:+49-(0)941-780 79 25
www.computer.toshiba.at
Azerbaijan AZEL (Azerbaijan Electronics)
Floor 5, 65 Fizuli Str.
370014 Baku
Tel: +99412-974040
Fax: +99412-974042
http://www.azel.net
Belgium Toshiba Information Systems Belgium
Excelsiorlaan 40
1930 Zaventem
Tel: +32-900-10990
Fax: +32-2-7253030
www.toshiba.be
Bulgaria IMPEX Sofia Ltd.
12, Anton Naydenov Street, PO Box 184,
1710 Sofia
Tel: +359-2-962-1219
Fax: +359-2-962-5062
Canada Toshiba of Canada Ltd.
191 McNabb Street
Markham, Ontario L3R-8H2
Tel: +1-905-470-3500
Fax: +1-905-470-3487
http://www.toshiba.ca
Czech
Republic
CHG Service , s.r.o.
Videnska 102
619 00 Brno
Tel: +420-5-4742-6581
Fax: +420-5-4742-6590
http:// www.chgservice.cz or
www.toshiba-pc.cz
Denmark Scribona Toshiba Digital Media
Hovedvejen 9, DK-2600 Glostrup
Tel: +45-3823-7600
Fax: +45-3823-7601
www.toshiba-dm.com
Egypt El Araby Co. for Trading and Manufactoring
P.O. Box 1224/Off Beirut St.
10, Mohammed Sabry Abolaalm Street
Kourba , Heliopolis / Cairo 11511
Tel: +202-291-6989
Fax: +202-291-6454
http://www.elaraby.com.eg
Estonia ServiceNet EE
Pärnu str. 142A
11317 Tallinn
Tel: +372-6504-949
Fax: +372-6504-916
http://www.servicenet.ee
Finland Scribona TPC OY / Toshiba Digital Media
Sinimäentie 14,P.O.Box 83, 02630 ESPOO
Tel: +358-9-5272555
Fax: +358-9-5272500
http://www.toshiba.se
France Toshiba Systèmes (France) S.A.
7 Rue Ampère ; B.P. 131
92804 Puteaux Cedex
Tel.: +33-8 92 69 70 92
Fax: +33-1-4728-2247
http://www.pc.toshiba.fr
Germany Toshiba Europe GmbH
Leibnizstraße 2, D-93055 Regensburg
Tel: 01805-23 16 32
Fax: +49-(0)941-7807-925
www.computer.toshiba.de
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-3
TOSHIBA TE2300
The TOSHIBA International Warrant
y
Greece Ideal Electronics S.A.
25 Kreontos Str.
10442 Sepolia, Athens
Tel: +30-210-5193950
Fax: +30-210-5193960
http://www.ideal.gr
Hungary Technotrade Informatikai Rt.
Öv u, 185,
1147 Budapest
Tel: +36-1-467 6100
Fax: +36-1-252 6470
http://www.technotrade.hu
Ireland Toshiba Information Systems (U.K.) Limited,
Toshiba Court, Weybridge Business Park,
Addlestone Road, Weybridge, Surrey KT15 2UL
Tel.: +353 (0)1248 1 248
Fax: + 44 (0)8702 202 303
www.toshiba.co.uk/computers/
Israel Mafil Technologies (3000) Ltd
8 Bareket Street
49517 Petah Tikwa
Tel: +972-3-918-3333
Fax: +972-3-924-1310
http://www.mafil.co.il
Italy Progetto Elettronica 92.S.p.A
Via de Gasperi 88a, 20017 Mazzo di Rho
Tel: +39-02-9397-5551
+39-02-939 75678
Fax: +39-02-9397-5299
http://www.pe92.it
Japan Toshiba Corporation, IOPC
1-1, Shibaura 1-Chome, Minato-KU
Tokyo 105-01
Tel: +81-3-3457-5565
Fax: +81-3-5444-9262
http://www.toshiba.co.jp
Jordan Scientific & Medical Supplies Co.
Jabal Amman, 1st Circle , Al Hayyek Street,
Opposite to Housing Bank
11118 Amman
Tel: +962 (6) 4624907
Fax: +962 (6) 462858
Kuwait Arabian Business Machines Co.
Salhiya-Sulaiman AL Laheeb Building 3
P.O. Box 29961, 13160 Safat
Tel: +965-242-9154
244-5373/-5369
Fax: +965-241-4399
www.abm-kuwait.com
Latvia Servicenet LV
Bullu Str 9
LV1055 Riga
Tel: +371-7052079
Tel.: +371 7460399
Fax: + 371-7460299
http://www.servicenet.lv
Lebanon ALCS
Diab Bldg. Mkalles Rd., P.O. Box 11-316
Beirut
Tel: +961-1-682-956
Fax: +961-1-682-965
www.pcdealnet.com
Lithuania ServiceNet LT
Palemono 7A
3023 Kaunas
Tel: + 370 37 4000 88
Fax: + 370 37 3108 05
http://www.servicenet.lt
Luxemburg See 'Netherlands'
Malta Tabone Computer Centre Limited
111 Old Railway Track
HMR-16 St Venera
Tel: +356-49 36 04
Fax: +356-49 36 03
http://www.tabone.com.mt
Morocco C.B.I. Lotissement Attoufik,
Rue No 1 Immeuble 29, Sidi Maarouf
20190 Casablanca/ Maroc
Tel: +212- 22 43 71 60/61
Fax: +212-22 43 71 88
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-4
TOSHIBA TE2300
The TOSHIBA International Warrant
y
Netherlands Toshiba Information Systems Benelux B.V.
Rivium Boulevard 41
2909 LK Capelle a/d IJssel
Tel: +31-0900-1000-1000
Fax: +31-10-2882-390
http://www.toshiba.nl
Norway Scribona Norway A/S
Stålfjæra 20, P.O.Box 51, Kalbakken
0901 Oslo
Tel: +47-22-897-189
Fax: +47-22-897-166
http://www.toshiba.se
Oman
(Sultanate of
Oman)
Suhail&Saud Bahwan (SSB)
Sarco Building, Ground Floor No. 459, Way
No. 310 Al Noor Street,
Ruwi 113 Muscat
Tel.: + 968 790191-117
Fax: +968-790 192
http://www.bahwanit.com
Poland AC Serwis Sp. Z o. o. ul.
Partyzantów 71, 43-316 Bielsko-Biala
Tel: +48- 33-8130-205
Fax: +48- (33-8130-209
http://www.acserwis.com.pl
Portugal Toshiba Information Systems Portugal
Edificio D. Pedro I, Sala 17
Quinta da Fonte
2780-730 Paço d’Arcos
Tel: +351-707265265
Fax: +351-21-000-1675
http://www.toshiba.pt
Qatar Mannai Trading Company
Rayyan Road, P.O. Box 76
Doha
Tel: +974 441-2555
Fax: +974 444-5413
Qatar Jarir Bookstore Qatar
Al Maha Center, Ramada Crossing, Salwa Road,
P.O. Box 24824, Doha
Tel: +974 444 0212
Fax: +974 444 04 32
www.jarirbookstore.com
Romania Scop Computers SRL
162 Barbu Vacarescu St, Sector 2
71424 Bucharest
Tel: +40-1-231-4602
Fax: +40-1-231-4606
http://www.scop.ro
Russia AC SERSO
Sovetskoi Armii st. 5
127018 Moscow
Tel: +7 - 095 284 5577
Tel: +7-095 105-8161
Fax: +7-095 284 5880
http://www.cepco.ru
Russia Microbit SERSO
Izmailovskiy Pr.2
S.Petersburg 198005
Tel.: +7 812 327-5700
www.microbit.ru
Saudi Arabia Arabian Business Machines Co.
Dareen Center, Ahsaa Road
P.O. Box 2006
11451 Riyadh
Tel: +966-1 478 4909
Fax: +966-1 477 7803
www.olayangroup.com
Saudi Arabia Jarir Bookstore
P.O. Box 3196
Olaya Street
11471 Riyadh
Tel: +966-1 462 6000
Fax: +966-1 462 9500
www.jarirbookstore.com
Slovakia HT Computers a.s.
Dobrovicova 8; 81109 Bratislava
Tel: +421-2-59334 550
Fax: +421-2-59334 555
http://www.htc.sk
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-5
TOSHIBA TE2300
The TOSHIBA International Warrant
y
Slovenia Inea d.o.o.
Stegne 11, 1000 Ljubljana
Tel: +386-1-513-81-00
Fax: +386-1-513-81-60
http://www.inea.si
South Africa CS IT Solutions, CS Holdings Office Park
Block D, 241 Third Road
PO Box 786691
1685 Midrand
Tel: +27 (0) 11 205-7000
Fax: +27-0-11-205-8586
http://www.cs.co.za/it.htm.
South Africa RECTRON (Pty) Ltd.
152 15th Road, Randjespark
Midrand, 1685
Tel: +27-0-11-203-1000
Fax: +27-0-11-203-1100
Spain Toshiba Information Systems (España) S.A.
Parque Empresarial San Fernando
Edificio Europa, 1a Planta, Escalera A
28830 (Madrid) San Fernando de Henares
Tel: +34-91-6606-700
Fax: +34-91-6606-760
http://www.toshiba.es
Sweden Tos hi b a Digital Medi a
Sundbybergsvägen 1, Box 1374
171 27 Solna
Tel: +46-200-212100
Fax: +46-8-734-4656
http://www.toshiba.se
Switzerland Toshiba Europe Gmbh, Swiss Sales branch,
Chriesbaumstrasse 4
Postfach 171
CH-8604 Volketswil
Tel: +41-848-845250
Fax: +41-1-908 5658
http://www.toshiba.ch
Turkey Bekom Bilgisayar Sistemleri San. ve TIC. A.S.
Burhaniye Mah. Neset Bey Sok. No:7
USKUDAR, ISTANBUL
Tel: +90 216 422 40 50
Fax: +90 216 422 55 20
http://www.toshibatr.com
Ukraine DKT-SERSO
Lesya Ukrainka blv, 26
01133 Kiev
Tel: +380-44-573-9627
Fax: +380-44-254-4646
http://www.dkt-cepco.com.ua
United Arab
Emirates
Al-Futtaim Electronics
P.O. Box 5866, Bin Ham Building, Mezzanine
Floor Adjacent to BurJuman Centre, Trade Centre
Road, Dubai
Tel: +971 4 351 5004
Fax: +971 4 351 4254
http://www.toshibauae.com
United Arab
Emirates
Al-Futtaim Electronics, Central Services Operation
Garhound Area, P.O. Box:531 Dubai, U.A.E.
Tel: +971 4 282 5112
Fax: +971 4 282 4094
United Arab
Emirates
Al-Futtaim Electronics, Central Services Operation
Mina-Area, P.O. Box:26605, Abudhabi, U.A.E.
Tel: +971 2 673 3004
Fax: +971 2 673 3809
United
Kingdom
Toshiba Information Systems (UK) Ltd.
Toshiba Court, Weybridge Business Park
Addlestone Road, Weybridge
Surrey KT15 2UL
Tel: +44-(0)8702 202202
Fax: + 44-(0)8702 202303
www.toshiba.co.uk/computers/
United States Toshiba America Information Systems, Inc.
9740 Irvine Blvd., P.O. Box 19724
Irvine, CA 92713-9724
Tel: +1-949-583-3000
Fax: +1-949-583-3345
http://www.toshiba.com
Yugoslavia CT Computers d.o.o.
Vladimira Popovica 6
11070 Beograde
Tel: +381-11-311-2060
Fax: +381-11-311-2060
http://www.comtrade.co.yu
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
C-6
TOSHIBA TE2300
The TOSHIBA International Warrant
y
Or for all countries not listed, please call the
Toshiba International Service Line:
or E-mail: toshibawarranty@nl.unisys.com
Tel: +352 460433
Fax: +31-20-488 7654
TOSHIBA addresses for the Internet/World Wide Web
TOSHIBA Europe
http://www.toshiba-europe.com
TOSHIBA Japan
http://www.toshiba.co.jp
TOSHIBA America
http://www.toshiba.com
TOSHIBA Canada
http://www.toshiba.ca
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-2
TOSHIBA TE2300
The TOSHIBA International Warrant
y
D. Appendix D
Keyboard Layouts
Arabic
Belgian
TOSHIBA TE2300
User’s Manual D-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-2
TOSHIBA TE2300
Keyboard Layouts
Danish
French
German
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-3
TOSHIBA TE2300
Keyboard Layouts
Greek
Hebrew
Italian
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-4
TOSHIBA TE2300
Keyboard Layouts
Norwegian
Polish
Portuguese
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-5
TOSHIBA TE2300
Keyboard Layouts
Russian
Spanish
Swedish
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-6
TOSHIBA TE2300
Keyboard Layouts
Swiss-German
Turkish
UK English
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
D-7
TOSHIBA TE2300
Keyboard Layouts
US English
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
E-8
TOSHIBA TE2300
Keyboard Layouts
E. Appendix E
Display Controller and Modes
Display controller
The display controller interprets software commands into hardware
commands that turn particular pels on or off.
The controller is an advanced Video Graphics Array (VGA) that provides
Super VGA (SVGA) and Extended Graphics Array (XGA) support for the
internal LCD and external monitors.
The following model is available:
■ 14" XGA, 1024 horizontal x 768 vertical pixels
A high-resolution external monitor connected to the computer can display
up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
The display controller also controls the video mode, which uses industry
standard rules to govern the screen resolution and the maximum number
of colors that can be displayed on screen.
Software written for a given video mode will run on any computer that
supports the mode.
The computer’s display controller supports all VGA and SVGA modes, the
most widely used industry standards.
TOSHIBA TE2300
User’s Manual E-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
E-2
TOSHIBA TE2300
Display Controller and Modes
Display modes
This appendix is a table of the display mode options of your computer's
Graphics and Memory Controller Hub.
Display Modes
CRT Display
Resolution
Color
Depth
Refresh Rate (Hz)
800*600 16bpp
32bpp
60
60
75
75
85
85
1024*768 16bpp
32bpp
60
60
75
75
85
85
1280*1024 16bpp
32bpp
60
60
75
75
85
85
1600*1200 16bpp
32bpp
60
60
75
75
85
85
1920*1440 16bpp
32bpp
60
60
75
75
2048*1536 16bpp
32bpp
60
60
75
75
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
F-3
TOSHIBA TE2300
Display Controller and Modes
F. Appendix F
If your computer is stolen
A
lways take care of your computer and try to prevent it from being stolen.
You are the owner of a valuable technical device, which may be highly
attractive to thieves, so please do not leave it unattended in a public
place. To further help protect against theft, security cables can be bought
for use with your notebook when it is being used at home or in the office.
Make a note of your computer’s machine type, model number, and serial
number, and put it in a safe place. You will find this information on the
underside of your notebook. Please also keep the receipt of the computer
you purchased.
Should your computer be stolen, however, we’ll help you try to find it.
Before contacting Toshiba, please prepare the following information which
is necessary to uniquely identify your computer:
■ In which country was your computer stolen?
■ What type of machine do you have?
■ What was the model number (PA number)?
■ What was the serial number (8 digits)?
■ When was it stolen, i.e. date?
■ What was the warranty seal number (if available)?
■ What is your address, phone, and fax number?
To register the theft, please follow these procedures:
■ Fill in the Toshiba Theft Registration form (or a copy of it) below.
■ Attach a copy of your receipt showing where your computer was
purchased.
■ Either fax or send the receipt and registration form to the address
below.
Your registration will be entered in a database, which is used to track
Toshiba computers at our service points around Europe.
TOSHIBA TE2300
User's Manual 6-F-3
TOSHIBA TE2300
User’s Manual F-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
F-2
TOSHIBA TE2300
If your computer is stolen
Toshiba Theft Registration
Send to: Toshiba Europe GmbH
Technical Service and Support
Leibnizstr. 2
93055 Regensburg
Germany
Fax number: +49 (0) 941 7807 925
Country stolen:
Machine type:
(e.g. TOSHIBA TE2300)
Model number:
(e.g. PT230E YXT)
Serial number:
(e.g. 70123456E)
Date stolen:
Warranty seal:
(e.g. 9813 123456 049)
Owner’s details
Name:
Company:
Street:
Postal Code/City:
Country:
Phone:
Fax:
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
G-1
TOSHIBA TE2300
If your computer is stolen
G. Appendix G
Internal Modem Guide
This appendix describes how to install and the remove the internal
modem.
Do not disassemble the computer beyond the steps described in this
instruction or touch any components not specifically described.
Installing the modem board
The internal modem is preinstalled. The following is for information only.
To install the modem board, follow the steps below.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the battery pack.
4. Remove one screw securing the modem cover and remove the
cover.
5. Remove two screws, which you use later to secure the modem
board.
6. Seat the modem board.
7. Connect the modem board cable.
8. Secure the modem board with two screws removed in step 5.
9. Seat the modem board cover and secure it with one screw.
10. Install the battery pack.
TOSHIBA TE2300
User's Manual 7-G-1
TOSHIBA TE2300
User’s Manual G-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
G-2
TOSHIBA TE2300
Internal Modem Guide
Removing the modem board
To remove the internal modem.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the battery pack.
4. Remove one screw securing the modem cover and remove the
cover.
5. Remove two screws securing the modem board.
6. Lift out the modem board.
7. Disconnect the modem board cable.
8. Seat the modem board cover and secure it with one screw.
9. Install the battery pack.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-1
TOSHIBA TE2300
Internal Modem Guide
H. Appendix H
ASCII Character Codes
This appendix shows the American Standard Code for Information
Interchange (ASCII) on the following pages. The characters in the IBM
char column appear on your display when you type the corresponding
ASCII code (as described in Chapter 5, The Keyboard). The characters
that are printed, however, depend on the software you are using. For most
software, the printed output for decimal codes 32 to 128 will match your
screen display.
TOSHIBA TE2300
User's Manual 8-H-1
TOSHIBA TE2300
User’s Manual H-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-2
TOSHIBA TE2300
A
SCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
Ctrl
char
00000 000 NUL
01001 1 SOH
002 02 2 STX
003 03 ♥3 ETX
004 04 ♦4EOT
005 05 ♣5ENQ
006 06 ♠6ACK
007 07 •7BEL
008 08 8 BS
009 09 9 HT
010 0A 10 LF
011 0B 11 VT
012 0C 12 FF
013 0D 13 CR
014 0E 14 SO
015 0F 15 SI
016 10 16 DLE
017 11 17 DC1
018 12 18 DC2
019 13 !! 19 DC3
020 14 20 DC4
021 15 § 21 NAK
022 16 22 SYN
023 17 23 ETB
024 18 ↑24 CAN
025 19 ↓25 EM
026 1A →26 SUB
027 1B ←27 ESC
028 1C 28 FS
029 1D ↔29 GS
030 1E ▲30 RS
031 1F ▼31 US
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-3
TOSHIBA TE2300
A
SCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
032 20 space 32
033 21 ! 33
034 22 “ 34
035 23 # 35
036 24 $ 36
037 25 % 37
038 26 & 38
039 27 ’ 39
040 28 ( 40
041 29 ) 41
042 2A * 42
043 2B + 43
044 2C , 44
045 2D - 45
046 2E . 46
047 2F / 47
048 30 0 48
049 31 1 49
050 32 2 50
051 33 3 51
052 34 4 52
053 35 5 53
054 36 6 54
055 37 7 55
056 38 8 56
057 39 9 57
058 3A : 58
059 3B ; 59
060 3C < 60
061 3D = 61
062 3E > 62
063 3F ? 63
Dec
code
Hex
code
IBM
char
Sort
seq
064 40 @ 64
065 41 A 65
066 42 B 66
067 43 C 67
068 44 D 68
069 45 E 69
070 46 F 70
071 47 G 71
072 48 H 72
073 49 I 73
074 4A J 74
075 4B K 75
076 4C L 76
077 4D M 77
078 4E N 78
079 4F O 79
080 50 P 80
081 51 Q 81
082 52 R 82
083 53 S 83
084 54 T 84
085 55 U 85
086 56 V 86
087 57 W 87
088 58 X 88
089 59 Y 89
090 5A Z 90
091 5B [ 91
092 5C \ 92
093 5D ] 93
094 5E ^ 94
095 5F _ 95
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-4
TOSHIBA TE2300
A
SCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
096 60 ’ 96
097 61 a 97
098 62 b 98
099 63 c 99
100 64 d 100
101 65 e 101
102 66 f 102
103 67 g 103
104 68 h 104
105 69 i 105
106 6A j 106
107 6B k 107
108 6C l 108
109 6D m 109
110 6E n 110
111 6F o 111
112 70 p 112
113 71 q 113
114 72 r 114
115 73 s 115
116 74 t 116
117 75 u 117
118 76 v 118
119 77 w 119
120 78 x 120
121 79 y 121
122 7A z 122
123 7B { 123
124 7C 124
125 7D } 125
126 7E ~126
127 7F 127
Dec
code
Hex
code
IBM
char
Sort
seq
128 80 Ç 67
129 81 ü 85
130 82 é 69
131 83 â 65
132 84 ä 65
133 85 à 65
134 86 å 65
135 87 ç 67
136 88 ê 69
137 89 ë 69
138 8A è 69
139 8B ï 73
140 8C î 73
141 8D ì 73
142 8E Ä 65
143 8F Å 65
144 90 É 69
145 91 æ 65
146 92 Æ 65
147 93 ô 79
148 94 ö 79
149 95 ò 79
150 96 û 85
151 97 ù 85
152 98 ÿ 89
153 99 Ö 79
154 9A Ü 85
155 9B ¢ 36
156 9C £ 36
157 9D ¥ 36
158 9E Pt 36
159 9F ƒ36
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-5
TOSHIBA TE2300
A
SCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
160 A0 á 65
161 A1 í 73
162 A2 ó 79
163 A3 ú 85
164 A4 ñ 78
165 A5 Ñ 78
166 A6 a 166
167 A7 o 167
168 A8 ¿ 63
169 A9 169
170 AA 170
171 AB 171
172 AC 172
173 AD ¡ 33
174 AE « 34
175 AF » 34
176 B0
177 B1
178 B2
179 B3
180 B4
181 B5
182 B6
183 B7
184 B8
185 B9
186 BA
187 BB
188 BC
189 BD
190 BE
191 BF
Dec
code
Hex
code
IBM
char
Sort
seq
192 C0
193 C1
194 C2
195 C3
196 C4
197 C5
198 C6
199 C7
200 C8
201 C9
202 CA
203 CB
204 CC
205 CD
206 CE
207 CF
208 D0
209 D1
210 D2
211 D3
212 D4
213 D5
214 D6
215 D7
216 D8
217 D9
218 DA
219 DB
220 DC
221 DD
222 DE
223 DF
1
2
1
4
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
H-6
TOSHIBA TE2300
A
SCII Character Codes
DecDec
code
Hex
code
IBM
char
Sort
seq
224 E0 α
225 E1 ß 83
226 E2 Γ
227 E3 Π
228 E4 ∑
229 E5 σ
230 E6 µ
231 E7 ϒ
232 E8 Φ
233 E9 Θ
234 EA Ω
235 EB δ
236 EC ϕ
237 ED φ
238 EE Ε
239 EF Λ
240 F0 Ξ
241 F1 ±
242 F2 ≥
243 F3 ≤
244 F4 ⌠
245 F5 ⌡
246 F6 ÷
247 F7 ≈
248 F8 °
249 F9
250 FA
251 FB √
252 FC η
253 FD 2
254 FE
255 FF
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
I-7
TOSHIBA TE2300
A
SCII Character Codes
I. Appendix I
Wireless LAN
This appendix is intended to help you get your Wireless LAN network up
and running, with a minimum of parameters.
Card specifications
Form Factor ■ Mini PCI TypeIII
Capability ■ IEEE 802.11 Standard for Wireless LANS
(DSSS)
■ Wi-Fi (Wireless Fidelity) certified by the
Wireless Ethernet Compatibility Alliance
(WECA)
Network Operating
System
■ Microsoft Windows® Networking
Media Access
Protocol Data Rate
■ CSMA/CA (Collision Avoidance) with
Protocol Acknowledgment (ACK)
■ 54/48/36/24/18/12/9/6 Mb/s (Revision A)
■ 11/5.5/2/1 Mb/s (Revision B)
■ 108/96/72/48/36/24/18/12 Mb/s
(Turbo Mode)
Radio characteristics
Radio characteristics of Wireless LAN cards may vary according to:
■ Country/region where the product was purchased
■ Type of product
Wireless communication is often subject to local radio regulations.
Although Wireless LAN wireless networking products have been designed
for operation in the license-free 2.4 GHz and 5 GHz band, local radio
regulations may impose a number of limitations to the use of wireless
communication equipment.
TOSHIBA TE2300
User's Manual 9-I-7
TOSHIBA TE2300
User’s Manual I-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
I-2
TOSHIBA TE2300
Wireless LAN
Refer to the sheet Information to the User for regulatory information that
may apply in your country/region.
R-F Frequency ■ Band 5 GHz (5150-5850 MHz) (Revision A,
Turbo Mode)
■ Band 2.4 GHz (2400-2483.5 MHz)
(Revision B)
Modulation Technique Direct Sequence Spread Spectrum
■ CCK, DQPSK, DBPSK (Revision B)
■ OFDM-BPSK, OFDM-QPSK, OFDM-
16QAM, OFDM-64QAM (Revision A,
Turbo Mode)
The range of the wireless signal is related to the transmit rate of the
wireless communication. Communications at lower transmit range may
travel larger distances.
■ The range of your wireless devices can be affected when the antennas
are placed near metal surfaces and solid high-density materials.
■ Range is also affected by “obstacles” in the signal path of the radio
signals that may either absorb or reflect the radio signal.
Supported frequency sub-bands
Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 5 GHz/2.4 GHz
channels.
Consult your Authorized Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.
Wireless IEEE 802.11 Channels Sets (Revision B)
Frequency Range Channel ID 2400-2472 MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457*
11 2462
* Factory-set default channels
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
I-3
TOSHIBA TE2300
Wireless LAN
When installing Wireless LAN cards, the channel configuration is
managed as follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■ For Wireless LAN cards installed in wireless clients operating in a
peer-to-peer mode, the card will use the default channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN card will use the
factoryset default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range Channel ID 5150-5850 MHz Note
36 5180
40 5200
44 5220
48 5240
52 5260
56 5280
60 5300
64 5320
149 5745 US only *
153 5765 US only *
157 5785 US only *
161 5805 US only *
* Available Area: US (USA, CANADA) only
A peer-to-peer mode is available under the following condition:
A Wireless LAN card receives a “US county/region code” beacon of the
standard IEEE 802.11 (Revision D) from a Wireless LAN Access Point.
Wireless Channels Sets (Turbo Mode)
Frequency Range Channel ID 5150-5850 MHz Note
42 5210 US only *
50 5250 US only *
58 5290 US only *
152 5760 US only *
160 5800 US only *
* Available Area: US (USA, CANADA) only
Glossary
The terms in this glossary cover the topics discussed in this manual.
Alternate naming is included for reference.
Abbreviations
AC: alternating current
AGP: accelerated graphics port
ANSI: American National Standards Institute
APM: advanced power manager
ASCII: American Standard Code for Information Interchange
BIOS: basic input output system
CMOS: complementary metal-oxide semiconductor
CPU: central processing unit
CRT: cathode ray tube
DC: direct current
DDC: display data channel
DOS: disk operating system
DMA: direct memory access
DRAM: dynamic random access memory
DSVD: Digital Simultaneous Voice and Data
DVD: Digital Versatile Disc
DVI: Digital Visual Interface
ECP: extended capabilities port
EGA: enhanced graphics adapter
FDD: floppy disk drive
FIR: fast infrared
HDD: hard disk drive
IDE: integrated drive electronics
I/O: input/output
IrDA: Infrared Data Association
TOSHIBA TE2300
User's Manual 0-1
TOSHIBA TE2300
User’s Manual Glossary-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
2
TOSHIBA TE2300
Glossar
y
IRQ: interrupt request
KB: kilobyte
LCD: liquid crystal display
LED: light emitting diode
LSI: large scale integration
MDA: monochrome display adapter
MPEG: moving picture coding experts group
MS-DOS: Microsoft Disk Operating System
OCR: optical character recognition (reader)
PCB: printed circuit board
PCI: peripheral component interconnect
PCMCIA: Personal Computer Memory Card International Association
RAM: random access memory
RGB: red, green, and blue
ROM: read only memory
RTC: real time clock.
SCSI: small computer system interface
SIO: serial input/output
SO-DIMM: small-outline dual in-line memory module
SVGA: super video graphics adapter
SDRAM: synchronized dynamic random access memory
TFT: thin-film transistor
UART: universal asynchronous receiver/transmitter
USB: Universal Serial Bus
VESA: Video Electronic Standards Association
VGA: video graphics array
VRM: video ready modem
VRT: voltage reduction technology
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
3
TOSHIBA TE2300
Glossar
y
A
AccuPoint II: A pointing device integrated into the TOSHIBA computer
keyboard.
adapter: A device that provides an interface between two dissimilar
electronic devices. For example, the AC adapter modifies the
power from a wall outlet for use by the computer. This term also
refers to the add-in circuit cards that control external devices, such
as video monitors and magnetic tape devices.
allocate: To assign a space or function for a specific task.
alphanumeric: Keyboard characters including letters, numbers and other
symbols, such as punctuation marks or mathematical symbols.
alternating current (AC): Electric current that reverses its direction of
flow at regular intervals.
analog signal: A signal whose characteristics such as amplitude and
frequency vary in proportion to (are an analog of) the value to be
transmitted. Voice communications are analog signals.
ANSI: American National Standards Institute. An organization established
to adopt and define standards for a variety of technical disciplines.
For example, ANSI defined the ASCII standard and other
information processing requirements.
antistatic: A material used to prevent the buildup of static electricity.
application: A group of programs that together are used for a specific
task such as accounting, financial planning, spreadsheets, word
processing, and games, etc.
ASCII: American Standard Code for Information Interchange. ASCII code
is a set of 256 binary codes that represent the most commonly
used letters, numbers, and symbols.
async: Short for asynchronous.
asynchronous: Lacking regular time relationship. As applied to computer
communications, asynchronous refers to the method of
transmitting data that does not require a steady stream of bits to
be transmitted at regular time intervals.
AUTOEXEC.BAT: A batch file that executes a series of MS-DOS
commands and programs each time you start the computer.
B
backup: A duplicate copy of files kept as a spare in case the original is
destroyed.
batch file: A file that can be executed from the system prompt containing
a sequence of operating system commands or executable files.
See also AUTOEXEC.BAT.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
4
TOSHIBA TE2300
Glossar
y
binary: The base two number system composed of zeros and ones (off or
on), used by most digital computers. The right most digit of a
binary number has a value of 1, the next a value of 2, then 4, 8, 16,
and so on. For example, the binary number 101 has a value of 5.
See also ASCII.
BIOS: Basic Input Output System. The firmware that controls data flow
within the computer. See also firmware.
bit: Derived from “binary digit,” the basic unit of information used by the
computer. It is either zero or one. Eight bits is one byte. See also
byte.
Bluetooth: A short-range radio technology designed to simplify wireless
communication among computers, communication devices and
the Internet.
board: A circuit board. An internal card containing electronic
components, called chips, which perform a specific function or
increase the capabilities of the system.
boot: Short for bootstrap. A program that starts or restarts the computer.
The program reads instructions from a storage device into the
computer’s memory.
bps: Bits per second. Typically used to describe the data transmission
speed of a modem.
buffer: The portion of the computer’s memory where data is temporarily
stored. Buffers often compensate for differences in the rate of flow
from one device to another.
bus: An interface for transmission of signals, data or electric power.
byte: The representation of a single character. A sequence of eight bits
treated as a single unit; also the smallest addressable unit within
the system.
C
cache memory: High speed memory which stores data that increases
processor speed and data transfer rate. When the CPU reads data
from main memory, it stores a copy of this data in cache memory.
The next time the CPU needs that same data, it looks for it in the
cache memory rather than the main memory, which saves time.
The computer has two cache levels. Level one is incorporated into
the processor and level two resides in external memory.
card: Synonym for board. See board.
CardBus: An industry standard bus for 32-bit PC Cards.
capacity: The amount of data that can be stored on a magnetic storage
device such as a diskette (floppy disk) or hard disk. It is usually
described in terms of kilobytes (KB), where one KB = 1024 bytes
and megabytes (MB), where one MB = 1024 KB.
CD-ROM: A Compact Disk-Read Only Memory is a high capacity disk
that can be read from but not written to. The CD-ROM drive uses a
laser, rather than magnetic heads, to read data from the disk.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
5
TOSHIBA TE2300
Glossar
y
Centronics: The printer manufacturer whose method of data transmission
between a parallel printer and a computer has become an industry
standard.
CGA: Color/graphics adapter. A video display protocol defined by the
IBM Color/Graphics Monitor Adapter and its associated circuitry.
This protocol supports two-color 640x200 and four-color 320x200
graphics, and 16-color 640x200 and 320x200 text modes.
character: Any letter, number, punctuation mark, or symbol used by the
computer. Also synonymous with byte.
chassis: The frame containing the computer.
chip: A small semiconductor containing computer logic and circuitry for
processing, memory, input/output functions and controlling other
chips.
CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit
fabricated on a silicon wafer that requires very little power.
Integrated circuits implemented in CMOS technology can be
tightly packaged and are highly reliable.
cold start: Starting a computer that is currently off (turning on the power).
COM1, COM2, COM3 and COM4: The names assigned to the serial and
communication ports.
commands: Instructions you enter at the terminal keyboard that direct
the actions of the computer or its peripheral devices.
communications: The means by which a computer transmits and
receives data to and from another computer or device. See parallel
interface; serial interface.
compatibility: 1) The ability of one computer to accept and process data
in the same manner as another computer without modifying the
data or the media upon which it is being transferred.
2) the ability of one device to connect to or communicate with
another system or component.
components: Elements or parts (of a system) which make up the whole
(system).
computer program: A set of instructions written for a computer that
enable it to achieve a desired result.
computer system: A combination of hardware, software, firmware, and
peripheral components assembled to process data into useful
information.
configuration: The specific components in your system (such as the
terminal, printer, and disk drives) and the settings that define how
your system works. You use the Hardware Setup, MaxTime or HW
Setup program to control your system configuration.
control keys: A key or sequence of keys you enter from the keyboard to
initiate a particular function within a program.
controller: Built-in hardware and software that controls the functions of a
specific internal or peripheral device (e.g. keyboard controller).
co-processor: A circuit built into the processor that is dedicated to
intensive math calculations.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
6
TOSHIBA TE2300
Glossar
y
CPS: Characters per second. Typically used to indicate the transmission
speed of a printer.
CPU: Central processing unit. The portion of the computer that interprets
and executes instructions.
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a
fluorescent screen-producing luminous spots. An example is the
television set.
cursor: A small, blinking rectangle or line that indicates the current
position on the display screen.
D
data: Information that is factual, measurable or statistical that a computer
can process, store, or retrieve.
data bits: A data communications parameter controlling the number of
bits (binary digits) used to make up a byte. If data bits = 7 the
computer can generate 128 unique characters. If data bits = 8 the
computer can generate 256 unique characters.
DC: Direct Current. Electric current that flows in one direction. This type
of power is usually supplied by batteries.
default: The parameter value automatically selected by the system when
you or the program do not provide instructions. Also called a
preset value.
delete: To remove data from a disk or other data storage device.
Synonymous with erase.
device driver: A program that controls communication between a
specific peripheral device and the computer. The CONFIG.SYS file
contains device drivers that MS-DOS loads when you turn the
computer on.
dialog box: A window that accepts user input to make system settings or
record other information.
disk drive: The device that randomly accesses information on a disk and
copies it to the computer’s memory. It also writes data from
memory to the disk. To accomplish these tasks, the unit physically
rotates the disk at high speed past a read-write head.
disk storage: Storing data on magnetic disk. Data is arranged on
concentric tracks much like a phonograph record.
diskette: A removable disk that stores magnetically encoded data used
on a microcomputer. Also called floppy disk.
diskette drive: An electromechanical device that reads and writes to
floppy disks. See also diskette.
display: A CRT, plasma screen, LCD, or other image producing device
used to view computer output.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
7
TOSHIBA TE2300
Glossar
y
documentation: The set of manual and/or other instructions written for
the users of a computer system or application. Computer system
documentation typically includes procedural and tutorial
information as well as system functions.
DOS: Disk operating system. See operating system.
driver: A software program, generally part of the operating system, that
controls a specific piece of hardware (frequently a peripheral
device such as a printer or mouse).
E
echo: To send back a reflection of the transmitted data to the sending
device. You can display the information on the screen, or output it
to the printer, or both. When a computer receives back data it
transmitted to a CRT (or other peripheral device) and then
retransmits the data to the printer, the printer is said to echo the
CRT.
EGA: Enhanced Graphics Adapter. A video display protocol defined by
the IBM Enhanced Graphics Adapter and its associated circuitry
for direct drive TTL displays that supports 16-color/monochrome
640x350 and 16-color 640x200 and 320x200 graphics, and 16-
color 640x350 and 320x350 text modes.
erase: See delete.
escape: 1) A code ( ASCII code 27), signaling the computer that what
follows are commands; used with peripheral devices such as
printers and modems.
2) A means of aborting the task currently in progress.
escape guard time: A time before and after an escape code is sent to
the modem which distinguishes between escapes that are part of
the transmitted data, and escapes that are intended as a
command to the modem.
execute: To interpret and execute an instruction.
Extended Capability Port: An industry standard that provides a data
buffer, switchable forward and reverse data transmission, and run
length encoding (RLE) support.
F
fast infrared: An industry standard that enables cableless infrared serial
data transfer at speeds of up to 4 Mbps.
file: A collection of related information; a file can contain data, programs,
or both.
firmware: A set of instructions built into the hardware which controls and
directs a microprocessor’s activities.
fixed disk: See hard disk.
floppy disk: See diskette.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
8
TOSHIBA TE2300
Glossar
y
floppy disk drive (FDD): See diskette drive.
Fn-esse: A TOSHIBA utility that lets you assign functions to hotkeys.
format: The process of readying a blank disk for its first use. Formatting
establishes the structure of the disk that the operating system
expects before it writes files or programs onto the disk.
folder: An icon in Windows used to store documents or other folders.
function keys: The keys labeled F1 through F12 that tell the computer to
perform certain functions.
G
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also
megabyte.
GND: Ground. An RS-232C signal used in the exchange of data between
a computer and serial device.
graphics: The use of drawings, pictures, or other images, such as charts
or graphs, to present information.
H
hard disk: A non-removable disk usually referred to as drive C. Also
called fixed disk.
hard disk drive (HDD): An electromechanical device that reads and
writes a hard disk. See also hard disk.
hardware: The physical electronic and mechanical components of a
computer system: typically, the computer itself, external disk
drives, etc. See also software and firmware.
hertz: A unit of wave frequency that equals one cycle per second.
hexadecimal: The base 16 numbering system composed of the digits 0
through 9 and the letters A, B, C, D, E, and F.
host computer: The computer that controls, regulates, and transmits
information to a device or another computer.
hot dock/undock: Connecting or disconnecting a device to or from the
computer while the computer’s power is turned on.
hotkey: The computer’s feature in which certain keys in combination with
the extended function key, Fn, can be used to set system
parameters, such as speaker volume.
HW Setup: A TOSHIBA utility that lets you set the parameters for various
hardware components.
I
icon: A small graphic image displayed on the screen or in the indicator
panel. In Windows, an icon represents an object that the user can
manipulate.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
9
TOSHIBA TE2300
Glossar
y
iLINK (IEEE1394): This port enables high-speed data transfer directly
from external devices such as digital video cameras.
infrared port: A cableless communications capable of using infrared
signals to send serial data.
input: The data or instructions you provide to a computer, communication
device or other peripheral device from the keyboard or external or
internal storage devices. The data sent (or output) by the sending
computer is input for the receiving computer.
instruction: Statements or commands that specify how to perform a
particular task.
interface: 1) Hardware and/or software components of a system used
specifically to connect one system or device to another.
2) To physically connect one system or device to another to
exchange information.
3) The point of contact between user, the computer, and the
program, for example, the keyboard or a menu.
interrupt request: A signal that gives a component access to the
processor.
I/O: Input/output. Refers to acceptance and transfer of data to and from a
computer.
I/O devices: Equipment used to communicate with the computer and
transfer data to and from it.
J
jumper: A small clip or wire that allows you to change the hardware
characteristics by electrically connecting two points of a circuit.
K
K: Taken from the Greek word kilo, meaning 1000; often used as
equivalent to 1024, or 2 raised to the 10th power. See also byte
and kilobyte.
KB: See kilobyte.
keyboard: An input device containing switches that are activated by
manually pressing marked keys. Each keystroke activates a switch
that transmits a specific code to the computer. For each key, the
transmitted code is, in turn, representative of the (ASCII) character
marked on the key.
kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte
and megabit.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
10
TOSHIBA TE2300
Glossar
y
L
level 2 cache: See cache.
Light Emitting Diode (LED): A semiconductor device that emits light
when a current is applied.
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets
of glass coated with transparent conducting material. The viewing-
side coating is etched into character forming segments with leads
that extend to the edge of the glass. Applying a voltage between
the glass sheets darkens the liquid crystal to provide contrast to
lighted portions of the display.
LSI: Large Scale Integration. 1) A technology that allows the inclusion of
up to 100,000 simple logic gates on a single chip.
2) An integrated circuit that uses the large scale integration.
M
main board: See motherboard.
MDA: Monochrome Display Adapter. A video display protocol defined by
the IBM Monochrome Display Adapter and its associated circuitry
for direct drive TTL displays that supports a monochrome 720x350
text mode.
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also
kilobyte.
megahertz: A unit of wave frequency that equals 1 million cycles per
second. See also hertz.
menu: A software interface that displays a list of options on the screen.
Also called a screen.
microprocessor: A hardware component contained in a single integrated
circuit that carries out instructions. Also called the central
processing unit (CPU), one of the main parts of the computer.
MMX: Refers to microprocessors with additional instructions beyond the
x86 standard. The instructions were developed on the basis of
multimedia code requirements and thus improve the performance
of multimedia applications.
mode: A method of operation, for example, the boot mode or the resume
mode.
modem: Derived from modulator/demodulator, a device that converts
(modulates) digital data for transmission over telephone lines and
then converts modulated data (demodulates) to digital format
where received.
monitor: A device that uses rows and columns of pixels to display
alphanumeric characters or graphic images. See CRT.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
11
TOSHIBA TE2300
Glossar
y
motherboard: A name sometimes used to refer to the main printed circuit
board in processing equipment. It usually contains integrated
circuits that perform the processor’s basic functions and provides
connectors for adding other boards that perform special functions.
Sometimes called a main board.
MPEG: Moving picture coding expert group is an industry standard
architecture for compression of video signals.
N
non-system disk: A formatted diskette (floppy disk) you can use to store
programs and data but you cannot use to start the computer. See
system disk.
nonvolatile memory: Memory, usually read-only (ROM), that is capable of
permanently storing information. Turning the computer’s power off
does not alter data stored in nonvolatile memory.
numeric keypad overlay: A feature that allows you to use certain keys on
the keyboard to perform numeric entry, or to control cursor and
page movement.
O
OCR: Optical Character Recognition (reader). A technique or device that
uses laser or visible light to identify characters and input them into
a storage device.
OCR wand: A device that reads, using an optical device, hand written or
machine printed symbols into a computer. See also OCR.
on-line state: A functional state of a peripheral device when it is ready to
receive or transmit data.
operating system: A group of programs that controls the basic operation
of a computer. Operating system functions include interpreting
programs, creating data files, and controlling the transmission and
receipt (input/output) of data to and from memory and peripheral
devices.
output: The results of a computer operation. Output commonly indicates
data
1) printed on paper,
2) displayed at a terminal,
3) sent through the serial port of internal modem, or
4) stored on some magnetic media.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
12
TOSHIBA TE2300
Glossar
y
P
parallel: Refers to two or more processes or events that can occur
simultaneously, and without interfering with each other. See also
serial.
parallel interface: Refers to a type of information exchange that
transmits information one byte (8 bits) at a time. See also serial
interface.
parity: 1) The symmetrical relationship between two parameter values
(integers) both of which are either on or off; odd or even; 0 or 1.
2) In serial communications, an error detection bit that is added to
a group of data bits making the sum of the bits even or odd. Parity
can be set to none, odd, or even.
password: A unique string of characters used to identify a specific user.
The computer provides various levels of password protection such
as user, supervisor and eject.
pel: The smallest area of the display that can be addressed by software.
Equal in size to a pixel or group of pixels. See pixel.
peripheral component interconnect: An industry standard 32-bit bus.
peripheral device: An I/O device that is external to the central processor
and/or main memory such as a printer or a mouse.
plug and play: A capability with Windows that enables the system to
automatically recognize connections of external devices and make
the necessary configurations in the computer.
pixel: A picture element. The smallest dot that can be made on a display
or printer. Also called a pel.
port: The electrical connection through which the computer sends and
receives data to and from devices or other computers.
Port Replicator: Devices that enables one-point connection to a number
of peripheral devices and provides additional ports and slots.
printed circuit board (PCB): A hardware component of a processor to
which integrated circuits and other components are attached. The
board itself is typically flat and rectangular, and constructed of
fiberglass, to form the attachment surface.
program: A set of instructions a computer can execute that enables it to
achieve a desired result. See also application.
prompt: A message the computer provides indicating it is ready for or
requires information or an action from you.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
13
TOSHIBA TE2300
Glossar
y
R
Radio frequency interference (RFI) shield: A metal shield enclosing the
printed circuit boards of the printer or computer to prevent radio
and TV interference. All computer equipment generates radio
frequency signals. The FCC regulates the amount of signals a
computing device can allow past its shielding. A Class A device is
sufficient for office use. Class B provides a more stringent
classification for home equipment use. TOSHIBA portable
computers comply with Class B computing device regulations.
Random Access Memory (RAM): High speed memory within the
computer circuitry that can be read or written to.
restart: Resetting a computer without turning it off (also called ‘warm
boot’ or ‘soft reset’). To restart the computer, press Ctrl + Alt + Del
while the computer is on. See also boot.
RCA jack: A single-pin connector that carries composite video signals,
which include both contrast and color information. See also
S-video.
RGB: Red, green, and blue. A device that uses three input signals, each
activating an electron gun for a primary additive color (red, green,
and blue) or port for using such a device. See also CRT.
RJ11: A modular telephone jack.
ROM: Read Only Memory: A nonvolatile memory chip manufactured to
contain information that controls the computer’s basic operation.
You cannot access or change information stored in ROM.
RS-232C: The Electronic Industries Association (EIA) interface standard
that describes the 25-pin connector interface and control, data,
and status signals that allow asynchronous communications
between computers, printers, communications and other
peripheral devices.
S
SCSI: Small Computer System Interface is an industry standard interface
for connection of a variety of peripheral devices.
serial: The handling of data bits one after the other.
serial communications: A communications technique that uses as few
as two interconnecting wires to send bits one after another.
serial interface: Refers to a type of information exchange that transmits
information sequentially, one bit at a time. Contrast: Parallel
interface.
serial port: A communications port to which you can connect devices,
such as a modem, mouse, or serial printer.
SIO: Serial Input/Output. The electronic methodology used in serial data
transmission.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
14
TOSHIBA TE2300
Glossar
y
soft key: Key combinations that emulate keys on the IBM keyboard,
change some configuration options, stop program execution, and
access the numeric keypad overlay.
software: The set of programs, procedures and related documentation
associated with a computer system. Specifically refers to
computer programs that direct and control the computer system’s
activities. See also hardware.
stop bit: One or more bits of a byte that follow the transmitted character
or group codes in asynchronous serial communications.
subpixel: Three elements, one red, one green and blue (RGB), that make
up a pixel on the color LCD. The computer sets subpixels
independently, each may emit a different degree of brightness. See
also pixel.
S-video: This connection provides separate lines for contrast and color,
which produces a video image superior to that produced by a
composite connection. See also RCA jack.
synchronous: Having a constant time interval between successive bits,
characters or events.
system disk: A disk that has been formatted with an operating system.
For MS-DOS the operating system is contained in two hidden files
and the COMMAND.COM file. You can boot a computer using a
system disk. Also called an operating system disk.
T
terminal: A typewriter-like keyboard and CRT display screen connected
to the computer for data input/output.
TFT: A color LCD technology that applies individual transistors to each
pixel enabling fine display control and excellent screen legibility.
TTL: Transistor-transistor logic. A logic circuit design that uses switching
transistors for gates and storage.
U
USB: Enables chain connection of a number of USB-equipped devices to
one port on your computer. For example, you might connect a
USB-HUB to the computer, then connect a keyboard to the USB-
HUB and a mouse to the keyboard.
V
VGA: Video graphics array is an industry standard video adapter that lets
you run any popular software.
volatile memory: Random access memory (RAM) that stores information
as long as the computer is connected to a power source.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
15
TOSHIBA TE2300
Glossar
y
W
Warm dock/undock: Connecting or disconnecting a device to or from
the computer while the computer is suspended.
warm start: Restarting or resetting a computer without turning it off.
window: A portion of the screen that can display its own application or
document. Often used to mean a Microsoft Windows window.
Wireless LAN: A short-range radio technology designed to simplify
wireless communication with other LAN systems based on Direct
Sequence Spread Spectrum radio technology that complies with
the IEEE 802.11 Standard (Revision B).
write protection: A method for protecting a diskette (floppy disk) from
accidental erasure.
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
16
TOSHIBA TE2300
Glossar
y
1.
Index
5 1/4" disk drive, 2-4
A
AC adaptor, 1-5, 2-17
Connecting, 3-5
AccuPoint II, 1-4, 2-8
control buttons, 2-8
precautions, 4-1
Using, 4-1
Advanced Port Replicator, 8-8
ASCII Character Codes, H-1
ASCII characters, 5-8, H-1
B
Battery
additional, 8-6
indicators, 6-3
Main battery, 6-4
Real time clock, 6-5
real time clock battery, 1-5
Replacing, 6-12
save mode, 1-8
Secondary battery, 6-5
types, 6-4
Battery pack, 1-5, 2-6
C
Cache memory
CPU cache, 1-3
level 2 cache, 1-3
CD/DVD drives
CD-R/RW drive, 1-3
CD-RW/DVD ROM drive, 1-3
Certification agencies, B-3
Cleaning the computer, 4-24
Cooling, 1-9
D
Diskette drive, 1-3
USB, 8-8
Display, 1-4
controller, 1-4
Display controller, E-8
Display modes, E-2
Docking, 2-6
E
Equipment checklist, 1-1
External monitor, 8-10
H
Hard disk drive, 1-3
Heat dispersal, 4-25
Hibernation, 1-8
benefits, 3-8
starting, 3-8
Hotkey, 1-7, 1-11
Hotkeys, 5-3
HW Setup, 7-15
U
indicators
Battery, 6-3
DC IN, 6-4
Infrared port, 2-2
Internal Modem Guide, G-1
K
Keyboard, 1-4
function keys, 5-2
Soft Keys, 5-2
Keyboard indicator, 2-10
Keypad overlay, 1-7, 1-11
TOSHIBA TE2300
User's Manual 0-I-16
TOSHIBA TE2300
User’s Manual Index-1
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
2
TOSHIBA TE2300
Inde
x
L
LAN, 1-6, 4-22
Loading discs, 4-6
M
Media care, 4-17
Memory, 1-3
expansion, 1-10
Memory expansion, 8-3
Modem, 1-6, 4-18
Specifications, A-2
Moving the computer, 4-24
O
Operating System, 1-7
Optical media drives, 4-6
P
Parallel printer, 8-9
Password
power on, 1-8
PC card, 8-2
Installing, 8-2
Removing, 8-3
Plug and Play, 1-7, 1-10
Ports, 1-5
DC IN 15V, 2-4
expansion port, 1-5
external monitor, 1-5, 2-4
headphone, 1-5
infrared, 1-5
Infrared, 2-2
LAN, 2-5
Microphone, 2-1
Parallel, 2-4
Serial, 2-5
Universal Serial Bus, 1-5
Power
Auto power on, 1-8
Display automatic power off,
1-7
HDD automatic power off,
1-7
panel power on/off, 1-8
Requirements, A-1
restarting the computer, 3-10
System automatic power off,
1-7
Turning off, 3-7
Turning on, 3-6
Power button, 2-8
Power conditions, 6-1
Power indicators, 6-3
Problems
CD-RW drive, 9-9
Diskette drive, 9-10
DVD-ROM drive, 9-8
Hard disk drive, 9-7
Hibernation, 9-17
Infrared port, 9-11
Keyboard, 9-6
LAN, 9-17
LCD panel, 9-7
Modem, 9-16
Monitor, 9-14
Password, 9-6
PC card, 9-14
Pointing device, 9-11
Power, 9-4
AC power, 9-5
Battery, 9-5
Overheating, 9-4
Printer, 9-11
Sound system, 9-14
support from Toshiba, C-1
TV output signal, 9-15
USB, 9-15
Wireless LAN, 9-17
Processor, 1-2
PS/2
keyboard, 8-12
mouse, 8-11
R
Removing discs, 4-9
Restarting the computer, 3-10
Restoring the Windows system,
3-10
S
Security lock, 1-11, 8-12
Select Bay, 1-6
SelectBay
Changing modules, 4-4
Slim Select Bay
2nd battery pack, 2-16
CD-RW/DVD-ROM drive,
2-13
DVD Multi drive, 2-14
DVD-ROM drive, 2-12
HDD adaptor, 2-16
modules, 2-12
Slim Select Bay options, 1-11
TE2300
Version
1
Last
S
aved on 21.05.2003 10:04
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
3
TOSHIBA TE2300
Inde
x
Soft Keys
Alt Gr Key Combinations, 5-2
Sound system
volume control, 2-3
Sound System, 1-6
Speaker, 2-8
Specifications, A-1
Built-in Modem, A-2
Environmental Requirements,
A-1
Physical Dimensions, A-1
Power Requirements, A-1
Standby, 1-8
Standby mode, 3-9
Stolen computer, F-3
Support, 9-18
T
Television, 8-11
The Keyboard, 5-26
TOSHIBA Utilities, 1-7, 1-9
Typewriter keys, 5-26
U
USB diskette drive, 2-11, 4-3
W
Windows special keys, 5-6
Wireless communication
switch, 2-2
Wireless LAN, I-7, 1-6, 4-21
Work space
Setting up, 3-2
Writing CD/DVDs, 4-13
Writing CDs, 4-11

Navigation menu