Toshiba Zl1 55 Users Manual

2015-03-11

: Toshiba Toshiba-Zl1-55-Users-Manual-656220 toshiba-zl1-55-users-manual-656220 toshiba pdf

Open the PDF directly: View PDF .
Page Count: 108

Download
Open PDF In Browser	View PDF

ZL1* Digital
Series

English

Contents

CONTROLS AND FEATURES
General controls ...............................................................................33
Quick Menu ..............................................................................33
Selecting channels ................................................................33
The Time Display – analogue only .................................33
Stereo and Bilingual transmissions .................................33
Using 3D functions .........................................................................34
Using the 3D glasses .............................................................34
Viewing 3D images ...............................................................35
Switching display mode or selecting 3D format ........35
Setting the auto start mode ..............................................37
Setting the 3D PIN code ......................................................37
Setting 3D Start Message ....................................................37
Setting 3D Lock ......................................................................38
Setting 3D Timer Lock ..........................................................38
Setting Enable 3D Timer .....................................................38
Displaying 3D Important Info ............................................38
Adjusting 2D to 3D Depth ..................................................38
Switching left and right images .......................................38
Sound controls .................................................................................39
Volume controls and sound mute ...................................39
Dual .............................................................................................39
Balance ......................................................................................39
Equaliser ....................................................................................39
Surround Settings ..................................................................39
Dolby Volume® .......................................................................40
Dynamic Range Control ......................................................40
Audio Level Offset .................................................................40
Headphone Settings .............................................................40
Audio Description .................................................................40
Widescreen viewing .......................................................................41
Picture controls ................................................................................43
Picture Mode ...........................................................................43
Picture preferences ...............................................................43
Reset ...........................................................................................43
ColourMaster ...........................................................................43
Base Colour Adjustment .....................................................44
Colour Temperature .............................................................44
Auto Brightness Sensor Settings ......................................44
LED Backlight Control ..........................................................44
Peak Brightness Adjustment .............................................45
Black/White Level ..................................................................45
Static Gamma ..........................................................................45
MPEG NR – Noise Reduction ..............................................45
DNR – Digital Noise Reduction .........................................45
Resolution+ ..............................................................................45
Active Vision M800 ................................................................45
Resetting the advanced picture settings ......................46
Expert Picture Settings ........................................................46
Control Visualization ............................................................48
Automatic Format (Widescreen) ......................................48
4:3 Stretch ................................................................................48
Blue Screen ..............................................................................48
Picture Position ......................................................................48
Picture still ................................................................................49
HDMI Information Display ..................................................49
Wireless LAN Information .............................................................50

INSTALLING YOUR TV
Safety Precautions ............................................................................. 4
Installation and important information ..................................... 5
Supplied Accessories ........................................................................ 9
Speaker / Pedestal Assembly .......................................................10
The remote control .........................................................................13
Inserting batteries and effective range ..........................13

CONNECTING YOUR TV
Connecting external equipment ................................................14
To connect the supplied USB HDD ..................................15
Connecting an HDMI® or DVI device to the HDMI input ...16
To connect an HDMI device ...............................................16
To connect a DVI device ......................................................16
HDMI’s ARC (Audio Return Channel) feature ...............16
REGZA-LINK connection ................................................................17
Connecting a computer ................................................................18
To connect a PC to the RGB/PC terminal .......................18
To connect a PC to the HDMI terminal ...........................18
Connecting a home network ......................................................19
To connect the TV to a home network - Wired ...........19
To connect the TV to a home network with an
internet connection - Wireless ......................................19
Controls and input connections .................................................20
Switching on ............................................................................20
Using the menu system .......................................................20
Using the TV controls and connections .........................20
MENU structure ................................................................................21

SETTING UP YOUR TV
Startup Application .........................................................................22
Quick Setup ..............................................................................22
Ant/Cable/Satellite (if available) .......................................23
Satellite Settings .....................................................................24
Auto Tuning .............................................................................26
ATV Manual Tuning .........................................................................27
Tuning ........................................................................................27
Skip ..............................................................................................28
Sorting positions ....................................................................28
DTV Manual Tuning ........................................................................29
Manual Tuning ........................................................................29
Manual Tuning for DVB-C ...................................................29
Manual Tuning for DVB-S ....................................................29
DTV Settings ......................................................................................30
Channels (Antenna/Cable) .................................................30
Channels (Satellite) ................................................................31
Standby Channel Update ....................................................31
DVB Character Set ..................................................................31
Dynamic Scan ..........................................................................31
Location setting ......................................................................32
Analogue switch-off ............................................................32

TEXT SERVICES
Text services ......................................................................................96
Selecting modes ....................................................................96
Text information ....................................................................96
Navigating pages using Auto ............................................96
Navigating pages using LIST .............................................96
Control buttons ......................................................................97

PROBLEM SOLVING
Questions and Answers ...............................................................98

INFORMATION
License Information ..................................................................... 101
Information ..................................................................................... 103
Specifications and accessories ................................................ 108

English

Digital settings – other settings ................................................85
Subtitles ....................................................................................85
Audio languages ....................................................................85
Common Interface ................................................................86
Software Upgrade and Licences ................................................86
Auto Upgrade .........................................................................86
Searching for New Software ..............................................86
Network Upgrade ..................................................................87
Software Licences ..................................................................87
System Information and Reset TV .............................................87
System Information ..............................................................87
Reset TV .....................................................................................87
PC Settings .........................................................................................88
Horizontal and Vertical Position .......................................88
Clock Phase ..............................................................................88
Sampling Clock .......................................................................88
Reset ...........................................................................................88
Input selection and AV connections ........................................89
Input selection ........................................................................89
External input skip .................................................................89
Labeling video input sources ............................................90
PC Audio ...................................................................................90
Side Shared Audio .................................................................90
HDMI 3 Audio ..........................................................................90
HDMI Settings .........................................................................91
Digital Audio Output ............................................................91
Using Personal TV Mode ...............................................................92
Using REGZA-LINK ...........................................................................93
Enable REGZA-LINK ...............................................................93
TV Auto Power ........................................................................93
Auto Standby ..........................................................................93
Amplifier Control ...................................................................93
Initial Speaker Setting ..........................................................93
Position Key Pass Through .................................................93
REGZA-LINK input source selection ................................94
REGZA-LINK Device Control ...............................................94
REGZA-LINK one touch play ..............................................94
REGZA-LINK system standby .............................................94
REGZA-LINK system audio control ..................................95
Toshiba PC compatible with REGZA-LINK ....................95

Setting up the Network .................................................................51
Wireless Setup .........................................................................51
Advanced Network Setup ...................................................53
DNS Setup .................................................................................54
Network Connection Test ...................................................55
Using the software keyboard ......................................................55
Network Device Setup ...................................................................56
External Control Setup .........................................................56
Media Renderer Setup .........................................................56
Power Control Mode .............................................................57
Device Name Setup ...............................................................57
Using the USB HDD Function ......................................................57
To record DTV programmes
(One Touch Recording) ....................................................58
To schedule programmed recording .............................58
To check, edit or delete scheduling information .......61
To view a recorded programme .......................................61
Operations from the Library screen ................................62
Other useful functions (Time Shift Recording) ............63
Recording Setup .....................................................................63
To disconnect a USB HDD ...................................................64
To confirm/delete Recording Information ...................65
Scheduling priority ................................................................65
Using Toshiba Places ......................................................................66
Using YouTube™ ..............................................................................66
Using the Function Menu ...................................................67
Using Hybrid TV Standard (if available) ...................................69
Using the Media Player ..................................................................69
Basic operation .......................................................................70
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......71
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......73
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......75
Using the Photo Frame feature ..................................................77
To open Photo Frame ...........................................................77
Setting the features ...............................................................77
Other features ...................................................................................79
Panel Lock .................................................................................79
The timers ...........................................................................................79
Programme Timers – digital only ...................................79
On Timer ....................................................................................80
Sleep Timer ..............................................................................80
Energy Saving Settings ..................................................................81
Automatic Power Down ......................................................81
No Signal Power Down ........................................................81
Digital on-screen information and Programme Guide ......81
Information ..............................................................................81
Guide ..........................................................................................82
Genre selection/searching ..................................................83
Digital settings – parental control ............................................83
Parental PIN Setup .................................................................83
Parental Setup .........................................................................84
Network Lock ..........................................................................84
Digital settings – Channel Options ..........................................84
Selecting favourite channels .............................................84
Favourite Channel Lists .......................................................84
Skip channels ...........................................................................85
Locking channels ...................................................................85

English

INSTALLING YOUR TV

Safety Precautions

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.

Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.

Air Circulation

DO NOT allow electrical equipment to be exposed to

Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.

dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.

Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.

WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.

Mains Supply

DO NOT use makeshift stands and NEVER fix legs with

The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is
not standing on the mains lead. Use only the supplied
lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter,
the removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.

DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.

wood screws. To ensure complete safety, always fit
the manufacturer’s approved stand, bracket or legs
with the fixings provided according to the
instructions.

DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.

Do
DO read the operating instructions before you
attempt to use the equipment.

WARNING: Excessive sound pressure from earphones
or headphones can cause hearing loss.

DO ensure that all electrical connections (including
the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw
the mains plug before making or changing
connections.

ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.

DO consult your dealer if you are ever in doubt about

NEVER connect the supplied COMPONENT
Adaptor cable, SCART-AV Adaptor cable or AV
Adaptor cable to a wall outlet. These cables are
ONLY for insertion into the socket provided for the
purpose on the rear/side of the TV.

the installation, operation or safety of your
equipment.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 5.

NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe than
sorry.

DO be careful with glass panels or doors on
equipment.

INSTALLING YOUR TV

English

Installation and important information
Where to install
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.

Fixing strap

Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.

Fixing strap
Sturdy tie (as short as possible)

The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
This is not a sign of a malfunction.

Stand clip
‘P’ Clip
Screw
(supplied)

Make sure the television is located in a position where
it cannot be pushed or hit by objects, as pressure will
break or damage the screen. Also, please be certain
that small items cannot be inserted into slots or
openings in the case.

Stand style is dependent on model

Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use
any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be
available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.

EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.

English

INSTALLING YOUR TV

When using the 3D glasses
Cautions on watching 3D images

• The 3D function has been designed for private use and
entertainment in your home environment. Please note
that any commercial use of the 3D function could lead to
copyright infringement of authors’ rights. Toshiba asks
you to respect the intellectual property rights of third
parties.

• Some viewers may experience a seizure or blackout
when exposed to certain flashing images or lights
contained in certain 3D television pictures or video
games.
Anyone who has had a seizure, loss of awareness, or other
symptoms linked to an epileptic condition, or has a family
history of epilepsy, should contact a health care provider
before using the 3D function.
• Avoid use of the 3D function when under the influence
of alcohol.
• If you are ill or feel ill, you should refrain from viewing
3D images, and consult your health care provider as
may be appropriate.
• If you experience any of the following symptoms when
viewing 3D video images, stop viewing and contact
your health care provider:
Convulsions, eye or muscle twitching, loss of awareness,
altered vision, involuntary movements, disorientation, eye
strain, nausea/vomiting, dizziness, headaches.
• If you feel eye fatigue or other discomfort from viewing
3D video images, remove the 3D glasses and
discontinue use until the condition is eliminated.
• Viewing in 3D may cause dizziness and/or
disorientation for some viewers.
Therefore, to avoid injury do not place your TV near open
stairwells, balconies, or wires.
Also do not sit near objects that could be broken if
accidentally hit.
• When viewing 3D images, always wear 3D glasses.
Watching 3D images without 3D glasses may cause eye
strain.
Use specified 3D glasses.
• When watching 3D images, do not wear 3D glasses at an
angle and do not lie down.
If you watch while lying down or with the glasses tilted, the
3D effect is lost and it may cause eye strain.
• It is recommended that the viewer’s eyes and 3D glasses
are level with the screen.
• If you have prescription eye glasses or contact lenses,
wear the 3D glasses over them.
Watching 3D images without appropriate eyewear may
cause eye strain.
• If 3D images often appear in double or if you cannot see
the images in 3D, stop viewing.
Continuous viewing may cause eye strain.
• Due to the possible impact on vision development,
viewers of 3D video images should be age 6 or above.
Children and teenagers may be more susceptible to health
issues associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.

About handling the 3D glasses
• Do not leave the 3D glasses or the accessories within the
reach of small children.
Inhaling or swallowing them may cause suffocation or
lesions in the stomach wall.
If swallowed, consult a doctor immediately.
• Do not repair, modify, or disassemble the 3D glasses by
yourself.
Doing so may cause a fire or cause you to become
indisposed while viewing 3D images.
Contact the Toshiba Call Center for repair of your 3D
glasses.
• Do not expose the glasses to excessive heat such as
sunshine, fire, or the like.

About the 3D glasses
• Do not use the 3D glasses if they are not working
properly or broken.
Continuing to use them in such a state may cause injury, eye
strain, or indisposition.
Do not use the 3D glasses if they are broken or have any
cracks.
• Do not stand or walk while wearing 3D glasses.
You may lose your balance which could result in falls or
other accidents.
• Do not wear the 3D glasses for any purpose other than
viewing 3D programming.
3D glasses do not function as sunglasses.
• Do not drop, exert pressure on, or step on the 3D
glasses.
Doing so may damage the glass section, which may result in
injury.
Exposing the 3D glasses to liquid or excessive heat may
damage the liquid crystal shutter function.
• If your nose or temple turns red, or you feel pain or
discomfort, stop using the 3D glasses.
Such symptoms as above may occur if you keep wearing
them for a long time, which may also cause indisposition.
• Be careful not to pinch your fingers in the hinge of the
3D glasses.

INSTALLING YOUR TV

• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
• If you use any device, such as a mobile phone or mobile
wireless device, near the 3D glasses, the 3D glasses may
not work correctly.
• Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.
- 3D glasses: 0°C - 40°C (32°F - 104°F)
- TV: 0°C - 35°C (32°F - 95°F)
• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or use another light.
(It is not recommended to watch the TV in a dark room,
especially for children.)
• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.

Screen height

• Watch the TV within effective viewing angle.
Otherwise, you may not see the correct 3D image. Effective
viewing angle:
- Within 30° horizontal, 20° vertical

About the connecting cable
• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.

Notes on handling the 3D glasses’ liquid crystal
shutter lenses
• Do not put excessive force on the lenses.
• Do not scratch the surface of the lenses with sharp
objects.
• Do not drop or bend the 3D glasses.

About the lithium-ion polymer rechargeable
battery
• Do not nail, hammer, or step on the battery.
Doing so may cause a short circuit, leading to overheating,
cracking, or fire.
• Do not overheat, disassemble, or short-circuit the
battery, or throw it into fire.
Doing so may cause cracking or fire.
• Do not connect the battery cord with metal items such
as wires. Also, do not carry or store the battery with
metal items such as necklaces or hairpins.
Doing so may cause a short circuit, leading to overheating,
cracking, or fire.

Notes on IR communication
• Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.
• Do not cover the IR sensor on the 3D glasses with
stickers or labels.
• Keep the IR sensor on the 3D glasses clean.
• The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glasses not to work correctly.
Use the TV and 3D glasses in a place where they will not
interfere with other devices or products.

If the 3D PIN number has been forgotten:
Use the Master PIN code of 1276, and then change to a
number of your choice. Select 3D PIN Setup from the
Preferences/3D Setup menu to enter PIN.

English

Notes on watching the TV

• Watching TV while sitting too close to the screen for an
extended period of time may cause eye strain.
The ideal viewing distance should be at least three times
the screen height.

English

INSTALLING YOUR TV

When using a USB HDD
• The recording function has been designed for private
use and entertainment in your home environment.
Please note that any commercial use of the recording
function could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect the
intellectual property rights of third parties.
• Before recording to a device connected to the TV, make
a test recording and check the recording performance.
• Programmes that are prohibited from copying due to
copyright protection cannot be recorded.
• Toshiba shall not be liable for compensation or
incidental damages of any kind whatsoever resulting
from content that was not properly recorded on the
recording device or that was modified or lost.
• Toshiba shall not be liable for damages of any kind
whatsoever (breakdown of the recording device,
modification or loss of the recorded content, etc.)
resulting from malfunction, operating failure or
incorrect operation due to combining with another
connected device.

• If you connect and register a USB HDD that has been
used with a PC or another TV, all the data and recorded
programmes stored on the disk will be deleted.
• To use a USB HDD that has been used with this TV on a
PC, the hard disk must first be formatted with the PC. At
this time, all the data stored using the TV will be
deleted.
• Do not turn off the power supply to the USB HDD or
disconnect the connecting cable while the USB HDD is
operating.
Doing so may result in loss of the recorded data or
malfunction of the USB HDD.
• If you connect a USB bus-powered device to the USB 1
port, it may interfere with recording on the USB HDD.
• The recording function is not available in all countries.
• Please note that recording on the USB HDD is no longer
playable after the TV’s main-board is exchanged during
service.

INSTALLING YOUR TV

English

Supplied Accessories
For how to assemble the Speaker and Pedestal Stand, refer to “Speaker / Pedestal Assembly” on page 10.
Accessories

Page

Accessories

Pedestal components

Page

Remote Control (CT-90378)
Batteries (AAA, IEC R03) x 2

P11

M5 (14mm) x 5 M6 (20mm) x 4
P13
Speaker/Screws

P11

M4 (14mm) x 6

Bracket for Speaker support/Screws
M4 (8mm) x 4

3D glasses/Battery charging cable/Pouch*
P12
P34

Bracket and Cover for Wall mounting/Screw

M5 (8mm) x 1
P12

* For wiping 3D glasses and storing it
USB HDD/USB cable

‘P’Clip/Screw for TV mounting

P15
P5
USB HDD Holder/Screws

M3 (8mm) x 4

Cable Clamp x 2
P14

P15

•
•
•
•
•

SCART Adaptor cable
COMPONENT Adaptor cable
AV Adaptor cable
SCART-AV Adaptor cable (AV input only)
RGB/PC-D-SUB(w/audio) Adaptor cable

User Manual

P14

—

English

INSTALLING YOUR TV

Speaker / Pedestal Assembly
Attach the speaker and pedestal stand.
WARNING: To prevent possible electric shock, protect
the power cord from being pinched when attaching
the pedestal stand.
CAUTION: Before beginning pedestal assembly,
carefully lay the front of the LCD Panel face down on a
flat, cushioned surface such as a quilt or blanket. Leave
the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
NOTE:
• Extreme care should always be used when attaching
the pedestal stand to avoid damage to the LCD panel.
• Two or more people are required for installation. When lifting the TV, do not hold the speaker to avoid damage to the speaker.

Check that all the following accessories are provided.
: Speaker/Screws
: Bracket for Speaker support/Screws
: Bracket and Cover for Wall mounting/Screw
: Pedestal components

14 mm

8 mm

20 mm

14 mm

INSTALLING YOUR TV

Attach the pedestal stand

Lay the LCD Panel face down on a flat, cushioned
surface such as a blanket.
Secure space.

English

Attach the speaker

Remove the cover (shown in the figure) from the
pedestal stand .

Remove.

b
b

Insert the speaker

Attach the pedestal stand
.

and

using the screws

into the TV as shown.

J
H

Fix the speaker in position with the screws

Insert the pedestal stand as shown.

M6 mm

English

INSTALLING YOUR TV

Fix the pedestal stand in position using the screws

Attach the cover that was removed in step 1.

K
Attach.

Bundle the connection cables using the cable clamps.

Connect the connection cable for the speaker to the
SPEAKER terminal on the TV.
Press the lock button on the connection plug and
insert.

Lock button.

To mount on a wall

Attach the bracket and cover for wall mounting (
)
instead of the pedestal stand, using the screws , as shown
in the figure.
Attach the bracket for speaker support
screws .

using the

INSTALLING YOUR TV

Simple at-a-glance reference of your remote control.

1
2
4
5

3
6
8

9
12

13
15

14
16

18
19

22
24
25
27
28
30
1
2
3
4
5

6
7
8
9
10
11
12
13
14
15
16

20
21
23
26
29
31

For On/Standby mode
To select external input sources
To select TV Mode
To access Quick Menu
To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
To access the analogue or digital Channel List
To alter the TV volume
Switch the Audio Description On/Off
To mute the TV sound
To change programme positions
To change TEXT pages
On-screen Menus
To display the digital on-screen Programme Guide
When using menus, the arrows move the cursor on the
screen up, down, left or right
Press OK to confirm your selection
To return to previous Menu
To exit menus

17 Colour buttons: Text and interactive service control
buttons
18 Number buttons
19 To display on-screen information
To access the index page in Text mode
20 To return to previous programme position
21 When in TV mode:
When in Text mode:
D Analogue time
A
To reveal concealed
display
text
B
To hold a page
C
To enlarge text
display size
D To select a page
while viewing a
normal picture
When using Programme During Playback:
c
To PLAY
Guide:
Z –24 hours
v
To STOP
z +24 hours
W/w To PAUSE/STEP
CC –1 page
To start Time Shift
cc +1 page
Recording
Z
To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z
To SKIP-FORWARD
22
23
24
25
26
27
28
29
30
31

To record TV programmes
To call up text services
To switch between 2D and 3D mode
Picture still
To access Media Player Menu
Selectable Picture preferences
Widescreen viewing
s Stereo/bilingual transmissions
To access More Information Menu
Digital Subtitles or Analogue TEXT Subtitle pages if
available

Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AAA,
IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
batteries immediately to prevent acid from leaking into the
battery compartment. Dispose of them in accordance with
instructions on page 102 of this manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.

English

The remote control

English

CONNECTING YOUR TV

Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.

USB 1/2 port

COMMON INTERFACE
LAN port
COMPONENT
VIDEO/AUDIO
INPUT (EXT 2)

VIDEO/AUDIO
INPUT (EXT 3)
DIGITAL AUDIO
OUTPUT (OPTICAL)

Cable clamps

HEADPHONE jack
HDMI 1/2/3/4 INPUTS

Aerial Cable

SPEAKER terminal

RGB/PC INPUT

Satellite dish
Media Recorder
* When using the COMPONENT VIDEO/AUDIO INPUT (EXT 2), also connect Adaptor cable 2 (RED and WHITE plugs) as Audio
cables to the VIDEO/AUDIO INPUT (EXT 3). EXT 3 Audio is shared.
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
“F-type”

Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.

HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 104.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press o to select between DTV, EXT 1, EXT 2,
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.

CONNECTING YOUR TV

Mount the USB HDD Holder on the back of the TV by
securing 4 screws.

Back of the TV

USB HDD Holder

Set the USB HDD into the USB HDD Holder, close the
cover until it clicks.

USB HDD

NOTE:
• To disconnect a USB HDD from the TV, follow the
procedures for “To disconnect a USB HDD” section
(page 64).
• Connect the USB HDD to the USB 2 port. Recording and
playback cannot be performed if connected to the USB 1
port.
• Recorded programs saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• If a USB HDD is re-registered, it will not be formatted.
• When the USB HDD is formatted, all the data stored on the
HDD will be deleted.

“Click”

Connect the USB cable.

To USB2

USB Cable

English

To connect the supplied USB HDD

English

CONNECTING YOUR TV

Connecting an HDMI® or DVI
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital
video from a DVI (Digital Visual Interface) source
device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 104.

To connect a DVI device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 3 terminal and audio cables to the PC/
HDMI 3 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 3 Audio” section on page 90.
the back of your television

NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”.
Your early HDMI source should operate properly with your
television. See page 91.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.

HDMI-to- DVI
adaptor Cable

Audio cable for HDMI to television
connection (not supplied)

To connect an HDMI device

DVI device

Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (
).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 3 Audio” section on page 90.

NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.

the back of your television

HDMI’s ARC (Audio Return Channel)
feature
This feature enables the audio signal of the TV to be sent to
the AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received
from the tuner of the TV through the AV amplifier.
the back of your television

HDMI cable

AV amplifier that supports ARC

HDMI device

To view the HDMI device video, press the o button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

HDMI cable

CONNECTING YOUR TV

English

REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of
setup and operations, see pages 93–95.
the back of your television

Playback device

AV amplifier

Playback device

For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo (
).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.

Before controlling the device(s):
• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 93).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.

English

CONNECTING YOUR TV

Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television and hear the sound from the television’s
speakers.

• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
Setup/System Setup menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 103).
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.

To connect a PC to the RGB/PC terminal

To connect a PC to the HDMI terminal

When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC
from the PC/HDMI 3 Audio options in the AV Connection
menu located in the Preferences menu.

When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.

the back of your television

If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
the back of your television

Audio cable for PC to
television connection
(not supplied)
Computer

Computer
Audio cable for PC to
television connection (not
supplied)

RGB PC cable
(not supplied)
Mini D-sub 15 pin connector

Conversion adaptor
if required
(not supplied)

To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 103.
To display the optimum picture, use the PC setting feature
(see page 88).

HDMI-to- DVI adaptor Cable

For acceptable PC and video signal formats, see page 104.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.

NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 3 analogue audio input terminal (see page 90).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.

CONNECTING YOUR TV

The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.

To connect the TV to a home network
with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 51.
TV (Built-In WLAN system)

NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 54.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.

Access point (AP)

Wireless LAN router

Modem

To connect the TV to a home network Wired
Computer

the back of your television

Modem (if available)

[1]

Router with Hub

[2]
[2] [3]

Server PC
Cable or Phone jack
[2]

[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.

English

Connecting a home network

English

CONNECTING YOUR TV

Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
USB 1 port
Media Player
USB 2 port
Media Player
USB HDD connection port
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
The software updating of CI Plus
CAM may be automatically executed.
At this time, your Recording/
Reminder programming will be
canceled.

3D IR

Ambient
Light Sensor

Control panel (touch sensor)

ORANGE LED – Programme timer
set (digital only)
RED LED – Programme timer
Active (digital only)

Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press 1 on the remote
control; it may take a few moments. The BLUE LED will be lit.
To put the television into Standby, press 1 on the remote
control. To view the television, press 1 again. The picture may
take a few seconds to appear.

RED LED – Standby
BLUE LED – Power on

To use the option, press B and b on the remote control to
move up and down and press C or c to select your desired
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.

Using the TV controls and connections

For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.

To alter the volume gently touch – 2 +.
To alter the programme position touch b p B.
Touch MENU and b p B , – 2 + to control the sound and
picture options.
Touch MENU to finish.
To select an external input, touch o until the appropriate
input source is selected.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
The USB 2 port has to be used with the USB HDD in order to
record/playback TV programmes.

Using the menu system

NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.

Press MENU on the remote control to display the menu.
The five initial topics icons will appear. As each symbol is
selected by pressing C or c on the remote control.
Press Bb C c to enter a sub menu and then enter a further
sub menu to see any options.

Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.

NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.

CONNECTING YOUR TV

English

MENU structure
To open the main menu (illustration below) , press MENU on the remote control or on the TV control panel.

Genre Search

Programme
Timers

Library

Setup

TV Programmes

Media Player

Guide

Function

1st Layer
Press MENU.

Connected TV

2nd Layer
Press C c / B.

Press C c.

3rd Layer
Press OK.

Press BbC c.

TV Programmes

Guide
Genre Search
Programme Timers
Library

Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Jump to Library

Photo
Movie
Music
Media Player Setup

Device Select
Device Select
Device Select
Media Player Setup Menu

Toshiba Places
YouTube

Jump to Toshiba Places
Jump to YouTube

Photo Frame
On Timer
Sleep Timer

Jump to Photo Frame
On Timer Menu
Sleep Timer Menu

Picture
Sound
Preferences
System Setup

Picture Menu
Sound Menu
Preferences Menu
System Setup Menu

Media Player

Connected TV

Function

Setup

English

SETTING UP YOUR TV

Startup Application
Before switching on the television, set your
decoder and media recorder, if applicable, to
Standby. To set up the television, use the buttons
on the remote control as detailed on page 13.

Quick Setup

AutoView
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
No

Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.

Press B, b, C, or c to select the menu language and
press OK.

Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.

Antenna
Cable
Satellite
Next

If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 9
to 12.
• When you select Satellite, skip to step 13.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.

Germany

Primary Subtitle Language

English

Secondary Subtitle Language

German

Primary Audio Language

English

Secondary Audio Language

English

NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.

Press OK, and the Location screen will appear.

To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.

Press B or b to highlight Start Scan and press OK.

You must allow the television to complete the
search.

Home

Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use C or c to
select the appropriate mode.

The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.

Location

Press OK. If the Ant/Cable/Satellite screen appears,
press B or b to select Antenna, Cable or Satellite
and press OK to check ( ).
Ant/Cable/Satellite

Quick Setup
Country

Press OK, and the AutoView screen will appear. Press
C or c to select Yes or No.

Press C or c to select Home or Store. For normal
home use, select Home.

Auto Tuning
Progress
DTV Tune

Press OK, and if your country supports the USB
Recorder function, the USB 2 port Setup screen will
appear. Press C or c to select Recorder.

ATV Tune

Found

2
Waiting...
Channel: C7

When the search is complete, the television will
automatically select position one.

USB 2 Port Setup
Please select how you will use the USB 2 Port.

The Auto Tuning screen will display the total number
of services found.

Recorder

NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
Press C or c to select the one you prefer.

SETTING UP YOUR TV

Press C or c to view the DTV (digital channel) or ATV
(analogue channel) lists.

Press B or b to move through the list to select a
channel and press OK to view.

Press B or b to highlight Store Position and press
OK to store the dish position. Repeat steps 13 and 14
for the next satellite as necessary.
If your satellite dish is not movable, the Positioning
screen will not appear.

In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.

Adjust the dish position manually for the maximum
Signal Level strength.
Highlight Done and press OK.

REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/
Radio/Text, DTV Sat TV/Radio/Text if available)
modes.

Auto Tuning - Satellite
Start Scan

NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.

Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” on page 24.

Satellite
Scan Option

Free to Air

Press B or b to highlight Start Scan and press OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.

None

LNB Power

No.

ASTRA(19.2°E)

You can select Scan Option from Free to Air and All.

Satellite Settings
Switch Type

If the reception testing completes successfully, the
Auto Tuning startup screen will display.

When the search is complete, the Auto Tuning results
screen will display the total number of services found.

Satellite
ASTRA 19.2˚E

Dish

LNB

2
3
4

Press B or b to move through the list to select a
channel and press OK to view.
PLEASE NOTE

Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600

The Quick Setup menu can also be accessed at any
time from the Setup/System Setup menu.
Done

Ant/Cable/Satellite (if available)

Highlight Done and press OK.

From this menu, you can set the RF input configuration.

If your satellite dish is movable, the following
Positioning screen will appear.
Positioning
Satellite : ASTRA 19.2°E
Transponder

1/83 (10743 MHz H)

Go to 0
Go to Stored Position
Step Size
Positioning

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight System Setup icon.

Press OK to display System Setup menu.

1
W

NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.

Store Position
Signal Level

Press B or b to select Ant/Cable/Satellite and press
C or c to select Antenna, Cable or Satellite.

30%

Press B or b to highlight Positioning and press C or
c to find the dish position with the strongest signal
level.

English

SETTING UP YOUR TV

When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto
Tuning screen.
Press B or b to select an item and press C or c to
select your desired option.
Auto Tuning
Tuning Mode

Satellite Settings
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.

To add a satellite:

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight System Setup icon.

Press OK to display System Setup menu.

DTV and ATV
Start Scan

DTV
Scan Type

Quick Scan

Start Frequency

Auto

End Frequency

Auto

Modulation

Auto

Symbol Rate

Auto

Network ID

Auto

Press B or b to select Satellite Settings and press
OK.
Satellite Settings
Switch Type

With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.

None

LNB Power

No.
1

Satellite
ASTRA 19.2˚E

Dish

LNB

2
3
4
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600

DTV Scan Type:

Done

This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.

Press b to highlight a new line to add an another
satellite and press OK.

DTV Start Frequency:

Press b until the required satellite is displayed and
press OK.

This sets the frequency from which the scan will begin.

DTV End Frequency:

To delete a satellite:

This sets the frequency at which the scan will end.

DTV Modulation:
You can choose from five QAM modulation settings.

DTV Symbol Rate:

In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
Press the RED button. A confirmation window will
appear.

This is the baud rate (KS/s) of the scan.

DTV Network ID:

NOTE: It is not possible to delete position No.1.

This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.

Press C or c to select Yes and press OK.

SETTING UP YOUR TV

To delete a transponder:

In the Satellite Settings menu, press B to highlight
Switch Type.

Press C or c to select None, ToneBurst, DiSEqC
2way or DiSEqC 4way as your satellite switch type.

Press b to highlight LNB Power and press C or c to
select On or Off.

English

To edit the satellite settings:

In the Transponder Settings menu, press B or b to
highlight the line you want to delete.
Press the RED button.

To edit the Transponder Settings:

To add a transponder:

In the Transponder Settings menu, press B or b to
highlight the line you want to edit and press OK.

Press C or c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons if necessary.

In the Satellite Settings menu, press B or b to
highlight the line you want to edit and press OK.
ASTRA 19.2˚E

Press the GREEN button. The Transponder Settings
screen will appear.

Press OK to save your settings.

Repeat steps 1 through 3 for other lines.

Transponder Settings

Frequency
10743

Polarisation
H

Symbol Rate
22000

S/S2
S

10773

22000

10788

22000

10817

22000

10832

22000

10847

22000

10861

22000

10876

22000

Press B to highlight a new line.

Press the GREEN button to cancel any edits that were
made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.

To select the Dish Type:

In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.

Press C or c to highlight Dish and press the GREEN
button.

Transponder Settings
76

Frequency
12640

Polarisation
V

Symbol Rate
22000

S/S2
S

12662

22000

Dish : 1

12669

22000

Dish Type

12692

22000

12699

22000

12721

22000

12728

22000

Dish Settings

Press OK.
83

Press the BLUE button to finish editing and return to
Satellite Settings.

Edit each parameter as required and press OK.
83

12731

22000

Fixed

Press C or c to select Dish Type. You can select
Movable or Fixed as the Dish Type.

English

SETTING UP YOUR TV

To select the LNB Settings:

In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.

Press C or c to highlight LNB and press the GREEN
button.

For DTV/ATV Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
Tuning Mode

LNB Settings

DTV and ATV

LNB : 1

Lower LOF

9750

Upper LOF

10600

Start Scan

Press C or c to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press OK to
continue with the Auto Tuning.

Press B or b to select Lower LOF or Upper LOF and
input the appropriate frequencies.

NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).

Auto Tuning
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.

The television will start to search for all available DTV
and/or ATV services.

Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added. All current channels and settings, i.e. locked channels,
will be lost.

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight System Setup icon.

Press OK to display System Setup menu.

Press B or b to select Auto Tuning and press OK.

You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
For Satellite Tuning:
A screen will appear warning that previous programmes
and settings will be deleted.
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
Start Scan

System Setup
Menu Language
Country

Satellite

English

Search Option

Germany

Ant/Cable/Satellite

All
Free to Air

Press B or b to highlight Satellite and press C or c
to select the desired satellite (No.1 Sat ~ No.4 Sat or
All).

Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning

You can select Free to Air or All as the Search Option.
Highlight Start Scan and press OK to continue with
the Auto Tuning.

DTV Settings

When the search is complete, the Auto Tuning screen
will display the services found.

Press B or b to move through the list to select a
channel and press OK to view.

SETTING UP YOUR TV

Tuning

In the System Setup menu, press b to select ATV
Manual Tuning and press OK.
System Setup
Menu Language

The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.

English

Country

Germany

Ant/Cable/Satellite
Satellite Settings
Auto Tuning

Use C and c to move across the screen and select any of the
ATV Manual Tuning options. Then use B or b to adjust the
settings.

ATV Manual Tuning
DTV Manual Tuning
DTV Settings

ATV Manual Tuning

System
1

1 2 3 45 6 7 8
1

2
3

V C R

2
3

S10
C7

S40

C22

System
Specific to certain areas.

C25

C28

C30

Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
Skip
Set Skip to On (8) or Off (() for the selected channel.
See page 28.

Signal Class
The channel classification.

Channel
The channel number on which a station is being
broadcast.

Search
Search up and down for a signal.

ATV Manual Tuning
Pos. Channel
1
C2

Position
The number to be pressed on the remote control to tune
the channel.

Use B or b to select the desired position. We suggest
Pos. 0 for a media recorder.

Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 98.
Station
Station identification. Use the B b and C c buttons to
enter up to seven characters.

Station

Different Channel numbers may be displayed.

c
d

Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
Press c to select System and press B or b to change
if required.
ATV Manual Tuning
System
1

Then press c to select Search.

Press B or b to begin the search. The search symbol
will flash.
ATV Manual Tuning

To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.

Search
1

English

ATV Manual Tuning

English

SETTING UP YOUR TV

g
h

Each signal will show on the television. If it is not your
media recorder, press B or b again to restart the
search.

Use B or b to turn Skip on.
Press OK.

8 on the screen indicates a skipped position.

When your media recorder signal is found, press c to
move along to Station. Use B, b, C and c to put in
the required characters, e.g. VCR.

ATV Manual Tuning
Skip: On
1

ATV Manual Tuning

Station
1

i
j
k

V C R

Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.

Press OK to save.

Skipped positions cannot be selected by PU and Pu
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.

Repeat for each position you want to tune, or press
BACK to return to the list of channels and select the
next number to tune.
Press EXIT when you have finished.

Sorting positions
Channels may be moved and saved to the position of your
choice.

PLEASE NOTE
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.

a
b

Select ATV Manual Tuning from the System Setup
menu.
Use B or b to highlight the position to be skipped
and press OK to select.
ATV Manual Tuning
Pos. Channel
1
C2
2

With the list of channels showing, use B or b to
highlight the channel you want to move and press c.

To prevent certain channels from being viewed, positions can be
skipped.

Select ATV Manual Tuning from the System Setup
menu.

ATV Manual Tuning
Pos. Channel

Skip

Press BACK and repeat from Step 2 or press EXIT.

S10
C7

S40

ABC1

C22

ABC1

C25

C28

C30

3
4

C40

ABC1

C22

ABC1

6
7

C25
C28

C30

Use B or b to move through the list to your preferred
position. As you do so, the other channels will move
to make room.

Press C to save your move.

Station

S10
C7

Repeat as necessary and press EXIT.

Press c to select Skip.

SETTING UP YOUR TV

Manual Tuning for DVB-C

NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.

When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned

Manual Tuning

Modulation – choose from one of five QAM modulation
options

This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.

Select DTV Manual Tuning from the System Setup
menu and press OK.

Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
Highlight Start Scan and press OK.

Manual Tuning for DVB-S

DTV Manual Tuning
Signal Strength
Quality

WEAK

AVERAGE

STRONG

GOOD

Channel

When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
DTV Manual Tuning - Satellite

Start Scan

b
c

Signal Strength
Quality

Enter the multiplex number using the number
buttons or use C or c to adjust the number up or
down.

STRONG

ASTRA 28.2°E

Transponder

1/83

Frequency

10714 MHz

Symbol Rate

22000 KS/s

Polarisation

Search Option

Free to Air

Start Scan

ABC TWO

Press B or b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
and press C or c to select the required option.

ABC THREE

Highlight Start Scan and press OK.

ABC NEWS 24
ABCi

Type

When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.

AVERAGE

POOR

Satellite

Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
DTV Manual Tuning
0 New Channels - Total 6
New Pos. Name
ABC ONE
1

WEAK

Repeat as necessary. Press EXIT to finish.

English

DTV Manual Tuning

English

SETTING UP YOUR TV

DTV Settings

Move — Press the GREEN button to activate the
Move feature. Press the B or b buttons to select the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the B or b buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.

Channels (Antenna/Cable)
The channel order may be changed to suit your personal
preference.

a
b

Select DTV Settings from the System Setup menu
and press OK.
Select Channels and press OK.
DTV Settings

Channels
Line No. 1/10
Pos. Name
1
ABC ONE

Channels

Subtitle and Audio
Parental PIN Setup
Parental Control

ABC TWO

Local Time Setting

ABC THREE

Off

CABC Channel

Standard

ABC NEWS 24

ABCi

822

823

Standby Channel Update
DVB Character Set
Dynamic Scan

For your convenience, you can jump to specific places
in the list by one of two methods.
Channels
Line No. 1/10
Pos.
Name
1
ABC ONE
2

ABC TWO

ABC THREE

CABC Channel

ABC NEWS 24

ABCi

822

823

TV
Sort: A-Z sort

Sort — Press the YELLOW button. A confirmation
window will appear. Press C or c to select Yes and
press OK.

TV
Sort: A-Z sort

Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes

The Sorting Type selection window will appear.
Sort
Sorting Type

Number
Sort

Line Number Jump — Use the number buttons
(0-9) to input the line number you want to select and
press OK.

Press C or c to set the sorting type.
A-Z Sort Station name order (A to Z)

Name Jump — Press CC or cc to jump to the

Number Position No. order (numerical sequence)

next station name with a different initial letter.

Press b to highlight Sort and press OK.

It is also possible to change the Position number of a
particular channel.

Renumber — Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.

Pos.
- - -

Name
ABC ONE

SETTING UP YOUR TV

Sorting Type — Press C or c to set the sorting type.
Select DTV Settings from the System Setup menu
and press OK.

A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)

Select Channels and press OK.

Preset Order — Press C or c to set Yes or No.

The satellite channel list will appear.

This item is displayed when Country is set to
Germany, and only applies to the Astra 19.2°E
satellite.

Channels
Line No. 3/1200
Pos. Station
1
DDD

Satellite TV

Press b to highlight Sort and press OK.

Satellite
19.2°E

19.2°E

801

BBC

22.5°E

802

22.5°E

803

22.5°E

822

25.6°E

823

25.6°E

For your convenience, you can edit and sort your
channel list.

Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.

a
b

Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and
press OK.

Press b to select Standby Channel Update and
press C or c to select On.

DVB Character Set
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9) to
be used for DVB-C or DVB-T channels.

Station Letter Jump — Press CC or cc to jump
to the next station name with a different initial letter.

Satellite Jump — Press Z or z to jump to the
next channel on a different Satellite.

Renumber — Same as Antenna/Cable channels.

See page 30.

Select DTV Settings from the System Setup menu
and press OK.

Select DTV Settings from the System Setup menu
and press OK.
Press b to select DVB Character Set and press C or
c to select Standard, West or Latin alphabet 9.

Move — Same as Antenna/Cable channels. See
page 30.

Dynamic Scan

Sort — Press the YELLOW button. A confirmation
window will appear. Press C or c to select Yes and

If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now?”. Select Yes or No. If you do not wish for the TV to
detect changes and prompt you to rescan, you should set this
feature to “Off”.

press OK.
The Sort menu will appear.
Sort
Group

By Satellite

Sorting Type

Number

Preset Order

Yes
Sort

Select DTV Settings from the System Setup menu
and press OK.
Press b to select Dynamic Scan and press C or c to
select On.

English

Group — Press C or c to select All or By Satellite.

Channels (Satellite)

English

SETTING UP YOUR TV

Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.

Select Location from the System Setup menu.

Press C or c to select Home or Store.

Analogue switch-off
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.

CONTROLS AND FEATURES

Mode

Quick menu item

Photo Frame
(Full Screen)

Quick Menu
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, Personal Mode, More
Information, Sleep Timer etc.
Press QUICK to display the Quick Menu and use B or b to
select the option.
Quick Menu
Picture Mode

AutoView

Picture Size

Super Live

Description

Picture

See page 43.

Picture Size

See page 41.

3D Settings

See page 36.

Personal Mode

See page 92.

Selecting channels
To select a channel, use the numbered buttons on the remote
control.
Channels can also be selected using PU and Pu.
To display on-screen information such as channel, input
mode or stereo/mono signal, press
. Press again to
cancel.

3D Settings
Personal Mode
More Information
Channel Options
00:00

The Time Display – analogue only

TV Speakers

The time display facility allows the current (text service) time to
be seen on the television screen.

Sleep Timer
REGZA-LINK Device Control
Speakers
Headphone Level

Press D whilst watching a normal television broadcast
to see the time display from the broadcaster. It will remain on
screen for about 5 seconds.

Wireless Information
Recording Information

NOTE: Quick Menu items are different depending on the
current mode.

NOTE: This display may not be available in some cases.

Quick menu item example
Mode
When viewing a TV
programme or
pictures from the
external input
Single Window or
3D Single Window

When using EPG

Media Player
(Photo Multi View,
List View)

Quick menu item

Stereo and Bilingual transmissions
Description

Picture Mode

See page 43.

For DTV programmes

Picture Size

See page 41.

3D Settings

See page 36.

For stereo or dual mono broadcasts, press s and use C or
c to select settings.

Personal Mode

See page 92.

Mode Display

More Information

See page 82.

Stereo

Stereo S Left S Right

Channel Options

See page 84.

Dual mono

Dual 1 S Dual 2 S Dual

Sleep Timer

See page 80.

REGZA-LINK Device
Control

See page 94.

Speakers

See page 93.

Headphone Level

See page 40.

Wireless Information

See page 53.

Recording
Information

See page 65.

Genre Colour

See page 83.

EPG Update/
Cancel EPG Update

See page 82.

Sort

See page 72.

Interval Time

See page 72.

Pressing c

Mono

–

Multichannel

–

For multi-audio track broadcasts, press s repeatedly to
change the audio language (see “Audio languages” on
page 85).

For ATV programmes

Repeat

See page 72.

Shuffle

See page 76.

Device Information

See page 72.

Wireless Information

See page 53.

If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press s to select Stereo or Mono.
Bilingual…Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed.
Choose the required programme number, and if
the word Dual appears, press s to select
Dual 1, Dual 2 or Mono.

English

General controls

English

CONTROLS AND FEATURES

Using 3D functions

To set the 3D glasses:

Before using 3D programming, see and follow
“When using the 3D glasses” section on page 6.

Viewing 3D programming requires the following:

• TOSHIBA 3D Glasses FPT-AG02G (supplied)
• Compatible 3D playback device or 3D source
• 3D capable high quality HDMI cable

When you use for the first
time, peel off the
protective films from the
lenses.

Peel off

Turn the 3D glasses on
with the power switch.

NOTE: If the infrared data communication between the
television and 3D glasses is lost for 5 minutes, the 3D glasses
turn off automatically to preserve battery life.

Using the 3D glasses

To charge the battery:
Names and functions
Lens (liquid-crystal
shutter)
A right and left liquidcrystal shutter opens and
closes alternately with
the images for the left
eye and for the right eye
alternately projected on
the television screen.
In this way, 3D images are
reproduced.

If the 3D glasses are turned on while the battery power is low,
the power light will blink 5 times. (If the battery is dead, the
power light will not blink or light.)
Power switch and
power light
Turns on or off the
power of 3D glasses
with the switch.
– When working, the
power light blinks
once every 2
seconds.
– When the power is
turned off, the power
light goes out.

Turn the 3D glasses off with the power switch, and
connect to the TV with the battery charge cable.
To USB

Power switch
ON

NOTE:
• If the 3D glasses are turned on, the battery will not
charge.
• When the TV is turned off or in standby mode, the
battery will be not charge.
• When charging the battery, the use of a USB cable
other than the battery charge cable supplied is not
covered by warranty.

OFF

Power light

b
c

When the light goes out, the charging is completed.
NOTE:
• It takes approximately two hours to charge the
battery.
• If the usage time is extremely short even after the
battery has been charged fully, the battery may be
worn out. Contact your dealer.

Protective films
Peel these off before beginning use.

Infrared reception
part
Receives the infrared
signal for the liquidcrystal shutter
control sent from the
television.

The power light will Light up.

USB terminal
When charging the battery,
connect to the TV with the
battery charge cable.
DC IN

To check the battery level:
When the 3D glasses are turned on, the behaviour of power
light is different.
• Charged:
Lights up for 2 seconds
• Low charge: Blinks 5 times
CAUTION: Danger of explosion if battery is incorrectly
disposed of.

CONTROLS AND FEATURES

If a right and left images are same in Native mode, select SBS.

Incoming video signals can either be in 2D or 3D format. A 2D
signal can be viewed in either 2D or 3D, and 3D can be viewed in
either 2D or 3D. If the TV can detect the fact that a signal is 3D, it
can change to 3D mode automatically – see “Setting the auto
start mode” (on page 37). Otherwise you can change the viewing
mode using the 3D button. Finally, the format of the 3D signal
can be either Side by Side (SBS) or Top and Bottom (TB). You may
have to choose the correct format if the TV can not detect it
automatically – see “Switching display mode or selecting 3D
format”, below.
Moreover, you can change 2D images to 3D images by pressing
the 3D button when viewing in 2D.

If a top and bottom images are same in Native mode, select
TB. 3D formats are the following.
3D format

NOTE:
• When 3D format signal is not received, display mode is not
switched to 3D.
• If appropriate mode and format are not selected, 3D image
is not correctly displayed.
• There will be restrictions on the Picture Size settings for 3D
Mode and 2D Mode.
• There are individual differences in perception of 3D images.
• When viewing 3D images, wear the 3D Glasses.
• The 2D to 3D conversion function is activated and
controlled by you according to your personal preferences.
• The 2D to 3D conversion function is meant for enjoyment of
2D home video, and other 2D content you create, in 3D
according to your personal preferences.
• The 2D to 3D conversion function is not intended for use
with pre-recorded 2D copyrighted content owned by a
third-party unless the copyright owner has given direct or
indirect permission, or unless applicable law permits such
use.

Description

Side by
Side (SBS)

Images for the left and right eyes
are positioned side-by-side.

Top and
Bottom
(TB)

Images for the left and right eyes
are positioned at the top and
bottom of the screen.

Frame
Packing
(FP) *

Image for the left and right eyes for
two frames are positioned at the
top and bottom of the screen.

* This format cannot be selected manually.

The 3D button's operation:
The behaviour of 3D when viewing in Native mode is different
depending on the input mode.
Depending on the input mode, the screen for selecting 2D or
3D is displayed or the display mode switches between 2D and
3D.

To switch to 3D mode:
• Set Preferences / 3D Setup / 3D Auto Start to 3D.
• Press 3D while viewing 2D mode or Native mode.
Trigger of Switching
Display Mode Press 3D button
Input Signal
Type

Additional Format Source Select
Information
Signal 3D

3D
With 3D
Format Auto Detect FP
Signal Information

Switching display mode or selecting 3D
format
There are four modes for watching TV.
Mode

SBS

Description

Displays 3D images.

Changes 3D images to 2D.

2D to 3D

Changes 2D images to 3D.

Native

Displays a received signal format as it is.

TB
Without 3D SBS
Auto Detect
Information TB
2D Format Signal
* Correct 3D image

Select
2D to 3D

3D
*

3D 3D

3D
3D

3D 3D
3D
3D

*
D
D

3D 3D
3
3

D 3

3D
3D

English

3D format select:

Viewing 3D images

English

CONTROLS AND FEATURES

To select 3D format from the Quick menu in 3D
mode:

To select 2D format from the Quick menu in 2D
mode:

Press QUICK to display the Quick Menu.

Press B or b to select 3D Settings and press OK.

Press B or b to select 3D Format Select and press
OK.

Press B or b to select 2D Format Select and press
OK.

Press C or c to select Side by Side or Top and
Bottom.

Press C or c to select 2D (SBS) or 2D (TB).
Trigger of Switching
Quick menu
Display Mode

Trigger of Switching
Quick menu
Display Mode
Input Signal
Type

Additional
Info

Input Signal

3D Fomat Select
Format Source
Signal

3D
With 3D
Format Auto Detect FP
Signal Information

SBS

3D
With 3D
FP
Format Auto Detect
Signal Information

3D
3D

SBS

3D 3D

3D 3D
3D
3D

2D Format Signal

3D 3D

*
D
D

3
3

D 3

3D 3D
3D

2D Format Signal

* Correct 2D image

* Correct 3D image

Press 3D
button

Input Signal
Format

3D
With 3D Auto
Format Detect
FP
Signal Information
SBS
TB

* Correct 2D image

3D
3D
3D 3D

3D 3D
*

3D
3D

3D 3D

3
3

3D
3D

3D 3D
*

3D
3D

• Press 3D while viewing 3D mode.
• Press 3D while viewing 2D to 3D mode.
NOTE: When 3D format signal with 3D Auto Detect
Information is received, it is not possible to switch to Native.

Trigger of Switching
Display Mode

2D Format Signal

Native

To switch to Native mode:

• Set Preferences / 3D Setup / 3D Auto Start to 2D.
• Press 3D while viewing 3D mode or Native mode.

Without 3D
Auto Detect
Information

NOTE: Take off the 3D Glasses in 2D mode.

To switch to 2D mode:

Additional
Info

Without 3D SBS
Auto Detect
Information TB

Type

2D Fomat Select

Type Additional Format Source SBS
Info
Signal

SBS
TB

Source
Signal

3D
3D 3D
3D

*
*

3D
3D 3D

In the Quick Menu, press B or b to select 3D
Settings and press OK.

Press B or b to select 2D Format Select and press
OK.

Press C or c to select Native.

3D 3D
3D

• From the Quick Menu in 2D mode.

NOTE: When Frame Packing is input, 2D Format
Select will be grayed out.

To switch to 2D to 3D mode:
Press 3D and select 2D to 3D while viewing 2D or Native
mode.
NOTE: Depending on the input mode, the display mode
switches between 2D and 3D.

CONTROLS AND FEATURES

Controls what the TV does when it detects a 3D signal.

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Preferences icon and
press OK.

To change or delete your PIN code:

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D PIN Setup.

Press the number buttons to enter your 4-digit PIN
code.

Press B or b to select 3D Setup and press OK.

Select Change PIN or Delete PIN and press OK.

Preferences

NOTE:
• PIN code cannot be set to “0000”.
• If PIN is deleted, 3D Safety Settings is grayed out,
and the settings are reset to the factory default.

3D Setup
Recording Setup
Personal TV Setup
REGZA-LINK Setup
Network Setup

Setting 3D Start Message

Network Device Setup
Media Renderer Setup

When this feature is set to On, a message is displayed onscreen
when a 3D signal is received.

Photo Frame Setup

Press B or b to select 3D Auto Start.

Press C or c to select 3D, 2D, or Off.

Option

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D Safety Settings and press
OK.

Description

Displays as 3D mode automatically when 3D
format signal is received.

Enter your 4-digit 3D PIN code.

Displays as 2D mode automatically when 3D
format signal is received.

Press B or b to select 3D Start Message.

Off

Displays a screen that allows you to select 3D
or 2D when 3D format signal is received.

Press C or c to select On or Off.

Setting the 3D PIN code
A 3D PIN code is necessary for using 3D Safety Settings.

To enter a new PIN code:

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D PIN Setup and press OK.

Press the number buttons to enter a 4-digit number.
Confirm the code.
NOTE: PIN code cannot be set to “0000”.

English

Setting the auto start mode

English

CONTROLS AND FEATURES

Setting 3D Lock
When this feature is set to On, you must enter 3D PIN code for
changing display mode.

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D Safety Settings and press
OK.

Displaying 3D Important Info

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D Important Info and press
OK.

Adjusting 2D to 3D Depth

Enter your 4-digit 3D PIN code.

Press B or b to select 3D Lock.

From the Menu:

Press C or c to select On.

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Setting 3D Timer Lock

Press B or b to select 2D to 3D Depth and press OK.

When the 3D Timer Lock feature is set to On, neither the PIN input
window nor the 3D start message will be shown while the 3D
Enable timer is active, even if a switch to 3D Mode occurs. This
helps to avoid asking for the 3D Lock PIN and displaying 3D start
message every time when switching to 3D.

Press C or c to select 1, 2, 3, 4, or 5.

a
b

In the Preferences menu, press B or b to select 3D
Setup and press OK.
Press B or b to select 3D Safety Settings and press
OK.

Enter your 4-digit 3D PIN code.

Press B or b to select 3D Timer Lock.

Press C or c to select On.

Setting Enable 3D Timer
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has passed, a
dialogue will be shown asking you if you wish to continue
viewing or not.

In the Preferences menu, press B or b to select 3D
Setup and press OK.

Press B or b to select 3D Safety Settings and press
OK.

Enter your 4-digit 3D PIN code.

Press B or b to select Enable 3D Timer.

Press C or c to select 30, 60, 90, or 120 minutes.

To cancel the timer, select Off.

You can adjust the level of 3D.

From the Quick Menu:

Press QUICK on the remote to open the Quick Menu.

Press B or b to select 2D to 3D Depth and press OK.

Press C or c to select 1, 2, 3, 4, or 5.

Switching left and right images
The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and right sides
of the 3D image.

Press QUICK on the remote to open the Quick Menu.

Press B or b to select 3D Settings and press OK.

Press B or b to select Left and Right Image.

Press C or c to select Swapped.

CONTROLS AND FEATURES

Volume controls and sound mute

Equaliser

Volume
Press y or Y to adjust the volume.

+20

Sound Mute
Press
once to turn the sound off and again to cancel.

0
-20

Dual
If a programme or film is being broadcast with a soundtrack in
more than one language, the Dual feature allows selection
between them.

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Sound icon and press OK.

Sound
Dual

10K

[Hz]
[Level]

Repeat step 4 for other frequencies.

Press B or b to select Surround and press C or c to
select Off, Spatial or Cinema.

Dolby Volume

Low

Dynamic Range Control

Off
Advanced Sound Settings

Headphone Settings

Equaliser

Audio Description

Surround

Off

Voice Enhancement

Dynamic Bass Boost

In the Sound menu, press B or b to select Balance
and press C or c to emphasize left or right speaker
balance.

Equaliser
You can adjust the equalizer on-screen as desired.
In the Sound menu, press B or b to select Advanced
Sound Settings and press OK.

Press b to highlight Voice Enhancement and press
C or c to select On.

Press b to highlight Dynamic Bass Boost and press
OK.

Press B or b to select Level and press C or c to
select Off, Low, Middle, or High.

Press B or b to select Corner Frequency and press C
or c to select 90Hz, 120Hz, or 150Hz. Select a
dynamic low frequency band.

Press B or b to select Equaliser and press OK.
Advanced Sound Settings
Equaliser
Surround

Off

Voice Enhancement

Dynamic Bass Boost

3.3K

In the Sound menu, press B or b to select Advanced
Sound Settings and press OK.

Balance

Audio Level Offset

330

Surround Settings

Dual 1

Advanced Sound Settings

100

Surround, Voice Enhancement, and Dynamic Bass Boost
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio will
sound fuller, richer, and wider.

Press B or b to select Dual and press C or c to
choose between Dual 1 or Dual 2.

Balance

Press C or c to select the frequency range you want
to adjust from the equalizer window and press B or
b to adjust the level.

Press the RED button.

English

Sound controls

English

CONTROLS AND FEATURES

Dolby Volume®

• When watching a DTV 5.1ch programme, this feature is not
available.

This feature provides a consistent sound volume regardless of
programmes, channels or input sources.

In the Sound menu, press B or b to select Dolby
Volume.

Press C or c to select Low, High or Off.

Headphone Settings
This setting is used to set the sound output when headphones are
connected.
Speaker
Link

NOTE:
• The Dolby Volume setting influences the Dynamic Range
Control and Digital Audio Output settings.
• This feature will automatically switch Off when Dynamic
Range Control is set to On or Digital Audio Output is set
to Auto.

Dynamic Range Control
This feature allows control of audio compression for some digital
TV programmes (MPEG-1 and MPEG-2 audio programmes are
not supported).

In the Sound menu, press B or b to select Dynamic
Range Control.

Press C or c to select On or Off.

Headphone

Speakers

Sound is output
(2 – + is available.)

No sound

Off

Sound is output
(Headphone level
menu is available.)

Sound is output
(2 – + is available.)

In the Sound menu, press B or b to select
Headphone Settings and press OK.

Press B or b to select Speaker Link and press C or c
to select On or Off.

NOTE: This feature will automatically switch Off when Dolby
Volume is set to Low or High.

If you select Off, then highlight Headphone Level
and use C or c to adjust the headphone sound.
Headphone Settings
Speaker Link
Headphone Level

Off
50

Audio Level Offset
Audio Description

Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an
external input. Using the Audio Level Offset feature reduces
these volume differences.

a
b

Set the volume level usually used when watching a
DTV 5.1ch programme.
Tune to a channel which is DTV 2ch, ATV or an
external input.

In the Sound menu, press B or b to select Audio
Level Offset and press OK.

Press B or b to select an option, and then press C or
c to adjust the volume level.

Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.

a
b

-5

ATV

External Input

NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only DTV 2ch is available and the other two items are
grayed out in the menu. This allows you to easily adjust
according to each condition.

Press B or b to select Audio Description and press
C or c to select On.
Audio Description
Audio Description
Mixing Level

Audio Level Offset
DTV 2ch

In the Sound menu, select Audio Description and
press OK.

On
50

The AD button on the Remote can also be used to
toggle the Audio Description feature between On
and Off.

To adjust the level of the audio description sound to
the main sound, highlight Mixing Level and press C
or c.

CONTROLS AND FEATURES

English

Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of
formats.

WIDE

4:3

Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9, 20:9
etc.) black bars may be visible on the
top and bottom of the screen.

Use this setting to view a true 4:3
broadcast.

SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.

CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.

SUBTITLE

When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
SUBTITLE

14:9

Use this setting when watching a
14:9 broadcast.

English

CONTROLS AND FEATURES

NATIVE

This setting will show the picture
without overscan, i.e. WYSIWYG.

PC NORMAL

This setting will show the picture
without overscan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.

PC WIDE

This setting will show the picture
without overscan or side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.

Dot by Dot

Press the

“Dot by Dot” is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side panels
and/or bars at the top and bottom (e.g.
VGA input source).

button on the Remote to display the list of available widescreen formats.

Press the button repeatedly to highlight the required format.
The Quick Menu feature can also be used to select Picture Size.
AV format
Picture Size
Native

PC format
Picture Size
Dot by Dot

Wide

PC Normal

4:3

PC Wide

Super Live
Cinema
Subtitle
14:9

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.

CONTROLS AND FEATURES

English

Picture controls

Picture preferences
You can customize current picture mode settings as desired. For
example, while selecting “Dynamic”, if you change the following
items, such as Backlight, Contrast, Brightness, Colour, Tint,
Sharpness and the Advanced Picture Settings items, your
new settings are saved for “Dynamic” picture mode.

Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be grayed
out.

Picture Mode

In the Picture menu press B or b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press OK.

Press C or c to adjust the settings.

This television offers the choice of personalising the picture style.
AutoView, Dynamic, Standard, Hollywood Night,
Hollywood Day, Hollywood Pro, Store, Game and PC are
preset options and affect many features/settings within the
television.

Reset

NOTE:
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the Auto Brightness Sensor and Expert Mode
menus are grayed out when it is selected.
• Store mode is only available when Location is set to Store.
• Game mode is available in external input mode (other than
aerial input). When you select Game mode, suitable
widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI input
mode.

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Picture icon and press OK
to display Picture menu.

Press B or b to select Picture Mode.

This feature resets all picture settings to the factory settings
except Picture Mode.

In the Picture menu, press B or b to select Reset and
press OK.

A confirmation message will appear. Press C or c to
select Yes and press OK.

ColourMaster
When ColourMaster is set to On, it allows the “Base Colour
Adjustment” feature to become available.

In the Picture menu, press B or b to select
Advanced Picture Settings and press OK.

Press B or b to select ColourMaster.

Picture
Picture Mode

Advanced Picture Settings

Dynamic

ColourMaster

Reset
Backlight

100

Base Colour Adjustment

Contrast

100

Colour Temperature

Colour

LED Backlight Control

Tint

Peak Brightness Adjustment

Sharpness

Black/White Level

Press C or c to select the picture mode you prefer
and press OK.

NOTE: The picture mode you select affects the current input
only. You can select a different picture mode for each input.

Auto Brightness Sensor Settings

Brightness

Static Gamma

Off

On
Auto
10
0

Noise Reduction

Press C or c to select On or Off and press OK.

English

CONTROLS AND FEATURES

Base Colour Adjustment

Auto Brightness Sensor Settings

The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.

In the Advanced Picture Settings menu, press B or
b to select Base Colour Adjustment and press OK.

Press B or b to select an option and press c to move
to the adjustment window.
Base Colour Adjustment
Hue
Red
0

Brightness
0

Blue

0
0

Magenta
Cyan
Reset

Press C or c to select Hue, Saturation or Brightness
and press B or b to adjust the settings as required.

Red

In the Advanced Picture Settings menu, press B or
b to select Auto Brightness Sensor Settings and
press OK.

Press C or c to select On and press OK.
Auto Brightness Sensor Settings

Saturation
0

Green
Yellow

Hue

Saturation

Brightness

-1

Auto Brightness Sensor

Backlight Adjustment Pro

c
d
e

Press B or b to select Backlight Adjustment Pro
and press OK.
The Backlight Adjustment Pro window will appear.
Press OK again to display the adjustment window.
Press C or c to select a point and press B or b to
adjust the level.
Backlight Adjustment Pro
Backlight Control Level

100

Control

Press BACK to return to the previous menu.

Level

To return to the factory settings, select Reset and
press OK.

Colour Temperature

Reset
Ambient Light

Colour Temperature increases the “warmth” or “coolness” of
the picture by increasing the red or blue tint.

Cancel

Press OK to fix the adjustment.
To cancel the adjustment when selecting a point,
select Cancel and press OK.

In the Advanced Picture Settings menu, press B or
b to select Colour Temperature and press OK.

To return the adjustments of all points to the factory
defaults, select Reset and press OK.

Press C or c to adjust the level.

LED Backlight Control

The adjustment range is 0 (warm) to 10 (cool).

You can adjust the backlighting of the black areas of the image
and enhance the contrast. When LED Backlight Control is set
to On, it allows the ‘Peak Brightness Adjustment’ feature to
become available.

NOTE: If Picture Mode is set to AutoView, the adjustment
range is -5 to +5.

In the Advanced Picture Settings menu, press B or
b to select LED Backlight Control.

Press C or c to select On or Off.

CONTROLS AND FEATURES

DNR – Digital Noise Reduction

When LED Backlight Control is set to On, you can adjust the
brightness of the white areas.

DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.

In the Advanced Picture Settings menu, press B or
b to select Peak Brightness Adjustment.

Press C or c to select Off, Low, Middle, High, or
Auto.

a
b

Select DNR from the Noise Reduction menu.
Press C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).

Black/White Level

Resolution+

Black/White Level increases the strength of dark areas of the
picture to improve the definition.

a
b

The Resolution+ feature allows you to adjust the clarity levels
for your desired picture settings.

In the Advanced Picture Settings menu, press B or
b to select Black/White Level.

Press C or c to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.

Resolution+

The static gamma feature allows you to adjust the levels of black
in the picture.

In the Advanced Picture Settings menu, press B or
b to select Static Gamma.

Press C or c to adjust the level.

MPEG NR – Noise Reduction
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing out
the edges.

Level

MPEG NR

Low

DNR

Auto

Press C or c to select Low, Middle, High or Off to suit
your preference.

Press B or b to highlight Level and press C or c to
adjust the level.

Active Vision M800

In the Advanced Picture Settings menu, press B or
b to select Noise Reduction and press OK.
Press b to select MPEG NR.

Auto
3

NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).

This feature will reduce picture blur without decreasing image
brightness or adding flicker.

In the Advanced Picture Settings menu, press B or
b to select Active Vision M800.

Press C or c to select Smooth, Standard or Off.

Noise Reduction

In the Resolution+ field, select Auto.
Resolution+

Static Gamma

In the Advanced Picture Settings menu, press B or
b to select Resolution+ and press OK.

NOTE: When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Off.

English

Peak Brightness Adjustment

English

CONTROLS AND FEATURES

Resetting the advanced picture settings
This feature allows you to reset the current Advanced Picture
Settings to the default values.

a
b

In the Advanced Picture Settings menu, press B or
b to select Reset.
Press OK.

Expert Picture Settings
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.

Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.

Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT601 and BT709) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If BT601 or BT709 is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto.

In the Expert Picture Settings menu, press B or b to
select Colour Decoding.

Press C or c to select Auto, BT601 or BT709.

White Balance-Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.

In the Expert Picture Settings menu, press B or b to
select White Balance and press OK.

Press B or b to select Window Display and press C
or c to select On.

In the Picture menu, press B or b to select Expert
Picture Settings and press OK to display Expert
Picture Settings menu.

Press B or b to select Test Pattern.

Press C or c to select On.

You can choose from two types of White Balance adjustment.

Press EXIT to close.

In the Expert Picture Settings menu, press B or b
to select White Balance and press OK.

Press B or b to select Setting Type and press C or c
to select 2P or 10P.

Press EXIT to close.

White Balance-Setting Type

RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.

White Balance-2P White Balance

In the Expert Picture Settings menu, press B or b to
select RGB Filter and press OK.

Press b to select 2P White Balance.

Press B or b to select Red, Green or Blue to adjust.

Press B or b to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain.

Press C or c to select On.

Press C or c to adjust.

Press B or b to select Colour or Tint and press C or
c to adjust.

White Balance-10P White Balance

Press b to select 10P White Balance.

Press B or b to select IRE, Red, Green, or Blue.

Press C or c to adjust.

Press EXIT.

NOTE: It is not possible to turn off all three colours
simultaneously.

NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)

CONTROLS AND FEATURES

The aim of Colour Calibration is to measure and/or adjust the
colour response (White Balance) of your LCD panel.
Colour Calibration is used by various fields, such as gaming,
photography, engineering, medical and more. In order to
calibrate a display correctly, you need a colour analyzer
TPA-1 (not supplied).

Please wait until you see “Auto Colour Calibration has
been completed.”.

Apply Calibration

In the Expert Picture Settings menu, press B or b to
select Colour Calibration and press OK.
Press B or b to select Apply Calibration and press C
or c to select Enabled.

Gamma Calibration

In the Expert Picture Settings menu, press B or b to
select Gamma Calibration and press OK.

Press B or b to select Apply Calibration and press C
or c to select Enabled.

Press B or b to select Auto Gamma Calibration and
press OK.

Manual Colour Calibration

In the Colour Calibration menu, press B or b to
select Manual Colour Calibration and press OK.
Manual Colour Calibration
Please input the value measured with the coulour analyser.

d
e

x
0.642
0.277
0.143

Red
Green
Blue

Start

b
c

Place the probe of the USB colour analyzer over the
square on screen and press OK.
Auto Colour Calibration will start.

NOTE: This feature is available when the Picture Mode option
is Hollywood Pro.

Connect the USB colour analyzer to the USB 1 or USB
2 port.

y
0.335
0.603
0.067

Connect the USB colour analyzer to the USB 1 or USB
2 port.
Input the target value and place the USB colour
analyzer over the square on screen.
Auto Gamma Calibration
Please input the target value and place the USB colour analyser
over the square.

Reset

Place the probe of the colour analyzer over the square
on screen to measure.
Input the value measured with the colour analyzer
using the number buttons (0-9).

Target Colour Temperature
Target Gamma

x
y
0.313 0.329
2.4
Start

Red
Green
Blue

d
e

x
0.642
0.277
0.143

y
0.335
0.603
0.067

Please wait until you see “Auto Gamma Calibration
has been completed.” on screen.
To return to factory setting

Highlight Start and press OK.

To return to factory setting

a
a

Highlight Reset and press OK.

In the Colour Calibration menu, press B or b to
select Auto Colour Calibration and press OK.

Highlight Reset and press OK.

Resetting to the factory defaults

Auto Colour Calibration

Highlight Start and press OK.
Auto Gamma Calibration will start.

Press BbC c and input the values to fill all RGBxy
matrix table.

Please wait until you see “Manual Colour Calibration
has been completed.” on screen.

Reset

In the Expert Picture Settings menu, press B or b to
select Reset and press OK.
A confirmation screen appears.

Select Yes and press OK.

English

Colour Calibration

English

CONTROLS AND FEATURES

Control Visualization

4:3 Stretch

This feature displays the brightness histogram and control curve
of the current video signal.

When 4:3 Stretch is activated, the size switching system
changes 4:3 programmes into full screen picture.

In the Picture menu, press B or b to select Control
Visualization and press OK. The histogram window
will appear.

In the Preferences menu, press B or b to select
Display Settings and press OK.

Press B or b to select 4:3 Stretch and press C or c to
select On or Off.

Control Visualization
Distribution

Blue Screen
Number
Of
Pixels

When Blue Screen is selected, the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
NOTE: Some external input sounds may not be muted.

Brightness

Control Curve

Output

In the Preferences menu, press B or b to select Blue
Screen.

Press C or c to select On or Off.

Picture Position
Input

The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.

Press BACK to return to the previous menu.

In the Preferences menu, press B or b to select
Display Settings and press OK.

In the Display Settings menu, press B or b to select
Picture Position.

Automatic Format (Widescreen)
When this television receives a true Widescreen picture and Auto
format is On, it will automatically be displayed in Widescreen
format irrespective of the television’s previous setting.

a
b

Display Settings

Press MENU / C c to highlight Setup icon.
Press B / C c to highlight Preferences icon and
press OK.

Press B or b to select Auto Format and press C or c
to select On or Off.

Display Settings
On
Off

Off

PC Settings

Press B or b to select Display Settings and press OK.

4:3 Stretch

4:3 Stretch
Picture Position

Auto Format

Press OK to view the options available for the picture
format that has been selected.
Press B or b to select an option and press C or c to
adjust the settings.
The options differ depending on the currently
selected widescreen format and the input signal.

Picture Position

PC Settings

Horizontal Position
Vertical Position

0
0
Reset

To return to the original factory settings, select Reset
in the Picture Position menu and press OK.

CONTROLS AND FEATURES

English

Picture still
This feature is used to hold a still image on the screen.

Press r to hold an image on the screen, and press
r again to cancel.

HDMI Information Display
When the HDMI Information Display feature is On and you are
watching an HDMI input source, pressing the
button
displays the HDMI signal information banner.

In the Preferences menu, press B or b to select
HDMI Information Display.

Press C or c to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate*, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and Content
Type (if available).
* If the HDMI input source is interlaced, “Field Rate”
will be displayed instead of “Frame Rate”.

English

CONTROLS AND FEATURES

Wireless LAN Information
Bluetooth™ and Wireless LAN devices operate within the
same radio frequency range and may interfere with one
another. If you use Bluetooth™ and Wireless LAN devices
simultaneously, you may occasionally experience a less than
optimal network performance or even lose your network
connection.
If you should experience any such problem, immediately turn
off either your Bluetooth™ or Wireless LAN device.
Actual performance can vary, including lower wireless
network capacity, data throughput rate, range and coverage.
Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction,
operating system used, mix of wireless products used,
interference and other adverse conditions.

Europe Statement
This built-in WLAN Module may be operated in below
country:

Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio
frequency electromagnetic energy. The level of energy
emitted by Wireless LAN devices, however, is far less than the
electromagnetic energy emitted by wireless devices such as
mobile phones.
Because Wireless LAN products operate within the guidelines
found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is safe for
use by consumers. These standards and recommendations
reflect the consensus of the scientific community and result
from deliberations of panels and committees of scientists
who continually review and interpret the extensive research
literature.
In some situations or environments, the use of Wireless LAN
may be restricted by the proprietor of the building or
responsible representatives of the organization. Such
restrictions may apply in environments where the risk of
interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of
wireless devices in a specific organization or environment,
you are encouraged to ask for authorization to use the
Wireless LAN device prior to turning on the equipment.

When using the TV under wireless LAN
environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.

Austria

Iceland

Belgium

Liechtenstein

Switzerland

Lithuania

Cyprus

Luxembourg

Czech Republic

Latvia

Germany

Malta

Denmark

Netherlands

Spain

Norway

Finland

Poland

France

Portugal

United Kingdom

Sweden

Greece

Slovenia

Estonia

Slovakia

Hungary

Bulgaria

Italy

Romania

Ireland

Turkey

• If this device is going to be operated in the frequency range
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835 GHz
in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the geographical
area within a radius of 20km from the centre of Ny-Alesund
in Norway.

Ukraine Statement
Contains approved built-in WLAN Module, model name:
WLU5060-D4 (ROHS), approved by CB “UkrCERTRADIO”.

CONTROLS AND FEATURES

Easy Setup using PBC (Push Button Configuration)

You can select the Network Type.

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Preferences icon and
press OK.

Press B or b to select Network Setup and press OK.

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Wireless Setup and press OK.

Press B or b to select Easy Setup and press OK.
Wireless Setup
Easy Setup

Preferences

Assisted Setup

3D Setup

Manual Setup

Recording Setup

Enhanced 11n

Off

Personal TV Setup
REGZA-LINK Setup
Network Setup
Network Device Setup

Press C or c to select PBC.

Press b to highlight Start Scan and press OK.

Photo Frame Setup
Teletext

Auto

Press B or b to select Network Type and press C or
c to select Wired or Wireless.

f
g

Network Setup
Network Type

Wired

Wireless Setup
Advanced Network Setup

Following the on-screen instructions, push the
appropriate button on your AP.
When a window reporting that the setup is complete
appears, press OK.

To cancel searching for the AP:
Press BACK while searching for the AP. A message will
appear and press C or c to select Yes and press OK.

Network Connection Test

If you selected Wired, see “Advanced Network Setup”
on page 53.

Wireless Setup
NOTE: Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.

There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make connection
of wireless LAN equipment and security setup easy. WPS
will automatically configure all wireless settings.

Easy Setup using PIN (Personal Identification
Number)

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Wireless Setup and press OK.

Press B or b to select Easy Setup and press OK.

Press C or c to select PIN.

Press b to select Start Scan and press OK.

Press B or b to select the desired AP and press OK.
NOTE: Check the Network Name and/or MAC address
on the label of the AP or in the manual, and select
your AP.

NOTE: WEP encryption may not be able to be configured by
easy setup.
Assisted Setup (setup by using the AP’s notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.

Manual Setup (manual input of all settings)

When the PIN code window appears, enter the
displayed PIN into your AP and press Next to continue
the PIN Setup. When a message displays to report that
the setup is complete, press OK.

English

Setting up the Network

English

CONTROLS AND FEATURES

To cancel searching for the AP:

Press B or b to select Authentication and press C or
c to select Open System, Shared Key, WPA-PSK or
WPA2-PSK.

Press B or b to select Encryption and press C or c
to select None, WEP, TKIP or AES.

Press BACK while searching for the AP. A message will
appear; then, press C or c to select Yes and press OK.
Assisted Setup

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Wireless Setup and press OK.

Press B or b to select Assisted Setup and press OK.

Press B or b to select the desired AP and press OK.

NOTE:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP
or None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.

NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.

e
f

Highlight Security Key and press OK. The Software
Keyboard window will appear.
Input the Security Key by using the Software
Keyboard (see page 55). To save your setting, press
the BLUE button.

h
i

NOTE:
• The Security Key must adhere to these conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP encryption.

Highlight Done and press OK.
NOTE: If Network Name is not displayed, see step 4
and 5 in Manual Setup below to set Network Name
before pressing Done.

NOTE: Settings are not saved if BACK is pressed before Done
is selected.

Manual Setup

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Wireless Setup and press OK.

Press B or b to select Manual Setup and press OK.

Press B or b to select Network Name and press OK.
The Software Keyboard window will appear.

Press B or b to select Security Key and press OK.
Input the Security Key by using the Software
Keyboard (see page 55). To save your setting, press
the BLUE button.
NOTE: This item is grayed out when Encryption is
None.

Highlight Done and press OK.
NOTE: When Encryption is None, a message will
appear. Press C or c to select Yes and press OK.

NOTE: Settings are not saved if BACK is pressed before Done
is selected.

Enhanced 11n
When Enhanced 11n is set to On, the Dual Channel (40MHz)
feature is available.
NOTE: In addition, some other optional 11n features will be
enabled.

In the Preferences menu, press B or b to select
Network Setup and press OK. Highlight Wireless
Setup and press OK.

Press B or b to select Enhanced 11n and press C or
c to select On.

Input the Network Name by using the Software
Keyboard (see page 55). To save your setting, press
the BLUE button.

CONTROLS AND FEATURES

The settings configured in Wireless Setup can be confirmed.

Press QUICK to open the Quick Menu.

NOTE: Even if an AP for IEEE 802.11n is used when Encryption
is set to WEP or TKIP, the Speed value might be low. It is
recommended that Encryption be changed to AES (see
“Manual Setup” on page 52).

Notes on wireless LAN environment:

Press B or b to select Wireless Information and
press OK.
Quick Menu
Picture Mode

AutoView

Picture Size

Super Live

3D Settings
Personal Mode
More Information
Channel Options
Sleep Timer

00:00

REGZA-LINK Device Control
Speakers

• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.

TV Speakers

Headphone Level

Advanced Network Setup

Wireless Information
Recording Information

When the Network Type is Wireless, a Wireless
Information window will appear.
NOTE: Press the RED button to scan for all APs.
Item

Status

Description
Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.

NOTE:
• When the DHCP function of the router connected with this
TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto Setup
to Off, and set the IP Address manually.

IP Address Setup
Auto Setup:

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Advanced Network Setup
and press OK.

Signal

Connection signal strength with AP
(STRONG/MEDIUM/WEAK)

Speed

Link with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Channel

Channel in use (1-165)

Network Name

SSID set

Wireless Setup

Authentication

Authentication set

Advanced Network Setup

Encryption

Encryption set

Network Connection Test

Security Key

Security Key set

AP MAC
Address

The AP’s MAC address is displayed when
the TV is connected with the AP.

TV MAC
Address

The MAC address of the TV is displayed.

DHCP

Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.

Network Setup
Network Type

Press B or b to select IP Address Setup and press
OK.
Advanced Network Setup
IP Address Setup

IP Address

The TV’s IP address

Subnet Mask

Value of the Subnet Mask

Default
Gateway

Address of the Default GATEWAY

DNS

Address of the DNS

Wired

DNS Setup
MAC Address

Wired

English

Wireless Information

English

CONTROLS AND FEATURES

DNS Setup

Highlight Auto Setup and press C or c to select On.
IP Address Setup
Auto Setup

IP Address

XXX .

Subnet Mask

255 . 255 . 255 .

Default Gateway

XXX . XXX

. XXX
0

NOTE: When the DHCP function of the router connected to
this TV is Off, set Auto Setup to Off, and manually set the DNS
address(es). Your internet service provider should have
provided these to you.

Auto setup:

NOTE: Other items will be grayed out when Auto Setup is set
to On.

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Advanced Network Setup and
press OK.

Press B or b to select DNS Setup and press OK.

Press B or b to highlight Auto Setup and press C or
c to select On.

Manual Setup:

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Advanced Network Setup and
press OK.

Press B or b to select IP Address Setup and press
OK.

NOTE: Other items will be grayed out when Auto Setup is set
to On.

Highlight Auto Setup and press C or c to select Off.

Manual setup:
IP Address Setup
Auto Setup

Off

IP Address

XXX .

XXX . XXX

Subnet Mask

255

Default Gateway

.
.

255

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Advanced Network Setup and
press OK.

Press B or b to select DNS Setup and press OK.

Press B or b to select Auto Setup and press C or c
to select Off.

. XXX

Press B or b to select IP Address.

Press C or c to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press OK.
NOTE: IP address field numbers must be between 0
and 255. After each field number has been set, press
OK to store the entire address. If the entire IP Address
is invalid, a warning message will appear after OK is
pressed.

Press B or b to select Subnet Mask, and edit in the
same way as IP Address.
IP Address Setup
Auto Setup

Auto Setup

XXX .

XXX . XXX

. XXX

Subnet Mask

255

.
.

255

XXX .

XXX . XXX

. XXX

Secondary DNS Address

255

Press B or b to select Primary DNS Address.

Press C or c to highlight the field you want to
change, and then use the number buttons to input
the Primary DNS Address. To save the setting, press
OK.

NOTE: DNS address field numbers must be between 0
and 255. If you input an incompatible number and
press OK, the field number will reset to the previous
value.

Press B or b to select Default Gateway, and edit in
the same way as IP Address.

NOTE: If you manually set the IP address, you must not use
the same IP address for any other device. The IP address you
use should be a private address.

Off

Primary DNS Address

Off

IP Address
Default Gateway

DNS Setup

Press B or b to select Secondary DNS Address, and
edit in the same way as Primary DNS Address.

CONTROLS AND FEATURES

Using the software keyboard

You can view the fixed MAC address for the TV.

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Advanced Network Setup and
press OK.

You can enter text by using the Software Keyboard.
The Software Keyboard window will appear when
you press OK on a field that accepts character input.
To enter text using the software keyboard:

Highlight the desired character on the on-screen
software keyboard.

Press B or b to select MAC Address and press OK.

b
Network Connection Test

This function checks the Internet connectivity.

In the Preferences menu, press B or b to select
Network Setup and press OK.

Press B or b to select Network Connection Test and
press OK.

Press OK.
Repeat steps 1 and 2 until you have entered all
desired text.
Press the BLUE button to close the software keyboard
and return to the previous screen.
NOTE: If BACK is pressed, changes are not saved and
the software keyboard window is closed. The text will
remain as it was before starting the keyboard.

A message will appear to indicate if the connection
was successful or if it could not be completed.

A a 1 @
AAA|

NOTE: The result of Network Connection Test does
not always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.

A B C D E
H

F G

K L M N

To cancel the Network Connection Test:

O P Q R S

Press BACK while searching for the Internet connection.

V W X

Y Z

Input operation on the remote control:
Button

Description

Inputs the selected character.

0-9

Inputs the number directly.

BbCc

Moves the character highlight.

CC cc

Moves the cursor.

Moves the cursor to the head of a
character string.

Moves the cursor to the end of a
character string.

RED

Deletes 1 character to the left of
the cursor.

GREEN

Cycles through upper case, lower
case, numbers, and symbols, if
available.

YELLOW

Chooses an accented version of
the current letter, if applicable.

BLUE

Saves changes and closes the
Software Keyboard window.

BACK

Closes the Software Keyboard
window without saving changes.

English

MAC Address

English

CONTROLS AND FEATURES

Network Device Setup

Media Renderer

In the Preferences menu, press B or b to select
Network Device Setup and press OK.

Press B or b to select Media Renderer Setup and
press OK.

Press B or b to select Media Renderer, and then
press C or c to select On or Off.

External Control Setup
This setup allows you to operate a home network-connected
your TV from an external device.

Media Controller Setup

In the Preferences menu, press B or b to select
Network Device Setup and press OK.
Preferences

Media Controller Setup
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a check will
be allowed to control the TV.

3D Setup
Recording Setup
Personal TV Setup
REGZA-LINK Setup

In the Media Renderer Setup menu, press B or b to
select Media Controller Setup and press OK.

Press B or b to select Access Control and press C or
c to select On.

Press B or b to select Select Media Controller and
press OK.

Press B or b to highlight the item you want to select
and press OK. A check will appear in the box.

Network Setup
Network Device Setup
Photo Frame Setup
Teletext

Auto

Press B or b to select External Control Setup and
press OK.

Press B or b to select an option and press OK.
The Software Keyboard window will appear.
User Name — Input the User Name (to control the TV
from the iPhone etc.) by using the on-screen software
keyboard (see page 55). The maximum number of
characters is 16.
Password — Input the Password (to control the TV
from the iPhone etc.) by using the on-screen software
keyboard (see page 55). The maximum number of
characters is 16.

NOTE: Toshiba does not guarantee normal operation with all
connected devices.

Media Renderer Setup

To remove the check, press OK again.

NOTE:
• You can select up to 8 DMC devices.
• If you would not like to limit the DMCs for this TV, set Access
Control to Off.
• Devices other than DMCs may be displayed in the list.
Confirm the MAC address of the DMC and set it.

Maximum Volume Setup
This feature allows you to set the maximum volume of the TV
when it receives volume operation commands from a DMC.

Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller

The TV can be configured as a DMR. When
operating as a DMR, the TV displays content
provided by a DMS. The selection of the media is
done by the DMC - the TV does not select the input.
The TV can play photo, movie, or audio files when
operating as a DMR.

Press c to highlight Done and press OK.

In the Media Renderer Setup menu, press B or b to
select Maximum Volume Setup, and press C or c to
adjust to the desired volume.

NOTE:
• The TV’s remote control can set volume regardless of the
value of Maximum Volume Setup.
• When DMR playback ends, the TV volume will return to the
value in effect when DMR playback was started.

CONTROLS AND FEATURES

When the TV is connected to the home network via Wireless LAN,
Wake-on-LAN can be received from an external device
connected to the home network to turn on the TV.

a
b

In the Preferences menu, press B or b to select
Network Device Setup and press OK.
Press B or b to select Power Control Mode and
press C or c to select On or Off.

NOTE:
• When Wired is selected for the Network type in Network
Setup, this feature will be grayed out.
• Depending on the device connected to the home network,
it may take a while for the TV to turn on.
• Depending on the device connected to the home network,
this feature may not work.
• If the unencrypted Wireless Setup is done, this feature can
not be used.

Device Name Setup
The TV’s DMR device name can be changed. The device name can
be confirmed from the DMC.

In the Preferences menu, press B or b to select
Network Device Setup and press OK.

Press B or b to highlight Device Name Setup and
press OK.

c
d

Highlight the Device Name field and press OK. The
Software Keyboard window will appear.
Input the Device Name by using the software
keyboard (see page 55). Press the BLUE button.
NOTE: The Device Name can be up to 15 characters
long.

Highlight Done and press OK to save your setting.

Using the USB HDD Function
The USB HDD function can be used to record and
view digital broadcast programmes. Read the
precautions below before recording or viewing
programmes using the USB HDD function.
NOTE:
• Recorded programmes saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• You cannot watch one channel while recording another.
• If the recording time to the USB HDD is too short, no data
may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording starts.
Also, leaving the power switch “ON” until recording is
scheduled to start, may cause the recording to fail.
• Should video or audio recording fail due to malfunction of
the TV or poor reception, no compensation shall be paid.
• You can reserve up to a total of 64 programmes for
recording and viewing.
• If there is a power failure or the power plug is disconnected
during programmed recording, recording will stop and will
not resume when the power returns or the plug is
reconnected.
• Do not disconnect the power plug when the indicator lamp
is lit.
• Any changes implemented by the broadcasting station may
affect programme scheduling.
• Scheduling of multiple consecutive programmes may result
in the beginning of each programme not being recorded.
• When the “Programme Tracking” for programmed
recording is set to “On” and the broadcast time of the
scheduled programme overlaps with the start time of timer
viewing due to delay, extension, or other causes, timer
viewing will be cancelled.
• Depending on the situation at the time, not all items can be
set or changed. (“X” indicates no setting.)
• Programmed recording cannot take place if the power plug
is not connected.
• Disconnecting the power plug during recording may result
in failure to save the recorded programme.
• Changing the USB 2 Port Setup to Media Player will
invalidate all previously made programmed recordings.
(see page 71)

English

Power Control Mode

English

CONTROLS AND FEATURES

To record DTV programmes
(One Touch Recording)

10:50 Tue, 26 Apr

Set Timer
The Daily Politics

You can easily record the programme currently being viewed.

Press OK. The Set Timer menu will appear.

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr

Press the ● REC button on the remote control.

Timer Type

Recording for the currently viewing programmes will
start.

Recording
USB HDD1

Recording Device

—

Programme Tracking

The programme indicator (red) will be lit.

Protect

Off

Personal Grouping

To stop recording

Change Time

Press the v (stop) button.
Set Timer

A confirmation window “Do you want to stop
Recording” will appear.

Press C or c to select Yes and press OK.

Press B or b to highlight Timer Type and press C or
c to select Recording.

Press B or b to highlight Recording Device and
press C or c to select the connected USB HDD.

Press B and b to go through the list adding the
details of the programme by using the number
buttons and C and c to make selections.

To schedule programmed recording
Programmed recording can be scheduled easily using the
Programme Guide or by specifying the date and time.
PLEASE NOTE:
When a timed programme is about to start, an information
screen will appear offering the option of watching or
cancelling the programme. The menus and other channels
will not be available during the timed programme unless the
programme timer is cancelled.
It will only be possible to create or edit programme timers for
the currently tuned DTV input.

Programme Tracking:
If information concerning programme delay is sent
from the broadcasting station, Programme Tracking
will link recording with a delay of up to three hours.
Programme Tracking is enabled when On is selected.
(It does not support advancing of the broadcast time.)
Protect:
Select this function when you want to protect a
recorded programme. When On is selected, the
programme will be protected. You can protect and
unprotect recorded programmes afterwards.

To schedule programmed recording using the
Programme Guide

Delete Timer
Edit

Recording will stop.

Subtitle

None
Off

Press the GUIDE button on the remote control (or
select TV Programmes / Guide menu from the menu
system) to display the EPG screen.

Personal Grouping:
Setting Personal Mode for a programme when it is
recorded makes it easier to find later for viewing.
Select your preferred Personal Mode. If you select
None, the programme will be grouped by All in
Library.

Press B b C c to highlight the programme you want
to record.

NOTE: To change the set Start Time or End Time,
select Change Time and press OK. Change the Start
Time or End Time from the displayed Set Timer
screen.

Press B or b to highlight Set Timer and press OK.
The ORANGE LED will be lit.

CONTROLS AND FEATURES

a
b

Press OK. The Set Timer menu will appear.
10:50 Tue, 26 Apr

Set Timer
The Daily Politics

In the Guide screen, press QUICK.

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr

Press B or b to highlight Genre Colour in the Quick
Menu and press OK.

Timer Type

Recording
USB HDD1

Recording Device

Genre Colour

—

Programme Tracking

Movies

Protect

Off

Personal Grouping

None
Off

Subtitle

Change Time
Colour Setup
Set Timer

With the focus on a particular genre, press the desired
coloured button to assign. Four colours will be
available to set. Press BACK to go back to the Guide
screen.

Edit

Press B or b to highlight Timer Type and press C or
c to select Recording.

Press the YELLOW button to access the Genre
Search screen.

Press B or b to highlight Recording Device and
press C or c to select the connected USB HDD.

Genre Search

Press B and b to go through the list adding the
details of the programme by using the number
buttons and C and c to make selections.

10:50 Tue, 6 Apr

Movies
34 AB1

Hard Rain

31 PARIS PREMIERE Red Corner

Wed,27 Apr 0:15- 1:45
Wed,27 Apr 22:15- 23:55

The Lawnmower Man

Thu,28 Apr 1:20- 3:00

9 W9

A Vow to Kill

Fri,29 Apr 1:30- 3:00

34 AB1

Parenthood

Sat,30 Apr 0:45- 2:40

11 NT1

Body and Soul

Sat,30 Apr 1:15- 3:00

11 NT1

31 PARIS PREMIERE The Nun’s Story
9 W9
11 NT1

Refer to step 6 on page 58 for details.

Press B or b to highlight Set Timer and press OK.

Sat,30 Apr 15:00- 17:30

Red Corner

Sat,30 Apr 23:20- 1:15

The Real Blonde

Sun,1 May 0:40- 2:00

31 PARIS PREMIERE Critters

Delete Timer

The ORANGE LED will be lit.

Sun,1 May 0:40- 2:20

11 NT1

Indiana Jones and the Temple of Doom Sun,1 May 21:10- 23:20

11 NT1

The jackal

Sun,1 May 23:20- 1:15

34 AB

Coup De Ville

Mon,1 May 1:10- 3:00

Press C or c to select the genre. Programmes listed
will change for the new genre. Press B or b to select
the programme for which you want to schedule
recording.

English

To search for and schedule a programme you want
to record using Genre Search

English

CONTROLS AND FEATURES

To programme the timer

a
b

Protect:
Select this function when you want to protect a
recorded programme. When On is selected, the
programme will be protected.
You can protect and unprotect recorded programmes
afterwards.

Press MENU / C c / B / C c to highlight TV
Programmed / Programme Timers icons and press
OK.
Select the unprogrammed column (blank column)
and press OK.
The Set Timer menu will appear.

Personal Grouping:
Select a Personal Mode for the programme to be
recorded to make it easier to find later for viewing.
Select your preferred Personal Mode. If you select
None, the programme will be grouped by All in
Library.

10:50 Tue, 26 Apr

Set Timer
Timer Type

Recording
30 CABC Channel

Channel

Tue, 26 Apr 2011

Date
Start Time

10:51

End Time

11:51

Repeat

Subtitle:
Select On when you want subtitles to be included in
the recording.

Once
USB HDD1

Recording Device

—

Protect

Off

Personal Grouping

The ORANGE LED will be lit.

None

Subtitle

Off
Set Timer

Delete Timer
Edit

Press B or b to highlight Timer Type and press C or
c to select Recording.

Press B and b to go through the list adding the
details of the programme by using the number
buttons and C and c to make selections.

Press B or b to highlight Set Timer and press OK.

To schedule a programme using the information
screen

Press
, the information screen will appear giving
details of the channel and programme currently
being viewed.
8888
REC
D+
3D

AD English

8:00- 9:00

World News and Sports

15 min left

Change

Press B or b to select the Next and press OK. The Set
Timer menu will appear.
10:50 Tue, 26 Apr

Set Timer
The Daily Politics

Repeat:
Select “Once”, “Daily” or “Weekly”.

Weekly

6:00- 8:00

Also MLB Young’s two-run triple leads AL over NL

End Time:
Select the time to end recording.

Daily

Now MLB Young’s two-run triple leads AL over NL
AD 18
News

HD 16:9

Date:
Select the date for programmed recording.

Once

6:00 Thu, 11 Oct
USER Name 3

2D Side by Side

Channel:
Select the channel for programmed recording.

Start Time:
Select the time to start recording.

ASTRA 19.2°E

ITV1 London

8888 ASTRA 19.2°E

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr

The selected content is recorded once.

Timer Type

The same time slot on the same channel
is recorded every day on and after the
selected day.

Recording Device

The same time slot on the same channel
on the same day of the week is recorded
on and after the selected day.

Personal Grouping

Recording
USB HDD1
—

Programme Tracking

Protect

Off
50

Subtitle

None
Off

Change Time

Recording Device:
Select the connected USB HDD.

Set Timer

Delete Timer
Edit

CONTROLS AND FEATURES

d
e

To delete a schedule

Press B or b to highlight Timer Type and press C or
c to select Recording.

Press B or b to highlight Recording Device and press
C or c to select the connected USB HDD.

Press the RED button.

NOTE: You can also delete a schedule by selecting Delete
Timer from the Set Timer menu for each programming
method.

Press B or b to highlight Set Timer and press OK.
The ORANGE LED will be lit.

To view a recorded programme
Display the Library screen and select the title of the recorded
programme from the list.

To check, edit or delete scheduling
information

You can check, edit or delete scheduling information.

Press B or b on the Programme Timer screen to
select the title whose schedule you want to delete.

Press C or c in the displayed confirmation window to
select Yes and press OK. The selected schedule will be
deleted.

Press B and b to go through the list adding the
details of the programme by using the number
buttons and C and c to make selections.
Refer to step 6 on page 58 for details.

Press MENU / C c / B / C c to highlight TV
Programmes / Programme Timer icons and press
OK. Programme Timer screen will appear.

Press MENU / C c / B / C c to highlight TV
Programmes / Library icons and press OK. Library
screen will appear.
Library

14:15 Wed, 16 Feb

Weekly
Sun

Recording List:
• Depending on the transmitter information, the
programme broadcast time or other information
may not be correctly displayed in the recording list.
• The programme does not appear in the recording
list immediately at the start of recording, but
appears a few minutes after recording starts.
• Up to 500 programmes can be displayed in the
recording list.
• If the channel settings are changed, the digital
channel number, or other information may not
appear correctly in the recording list.
• As the displayed programme time is calculated
from the actual recording information, it may not
match the recording time on the USB HDD.

Mon

Tue

Wed

Thu

Fri

WWWWW
WWWWWW
WWWWWWWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW

Wed, 16 Feb 10:00
Wed, 16 Feb 10:00
Thu, 17 Feb 10:00
Thu, 17 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 18 Feb 10:00
Sun, 18 Feb 10:00
Sun, 18 Feb 10:00
Sun, 18 Feb 10:00
Mon, 18 Feb 10:00

1235 ITV London

ASTRA 19.2°E
10 July 2011 14:30(01:30)
USB HDD1
Remaining Capacity:
86% (912.0GB)

Press B or b to select the title you want to view.
The content of the title selected on the thumbnail
screen is played.
To change the order in which the titles are listed, press
the BLUE button to select New or Old.

Press B or b on the Programme Timer screen to
check the schedule.

To display the titles by week or by Personal Mode,
press the YELLOW button to select All, Weekly or
Personal Grouping.

To edit a schedule

Library

Press B or b on the Programme Timer screen to
select the title whose schedule you want to edit and
press OK.

Weekly
Sun

The Set Timer screen will appear. Change the settings
as required, following the same procedure as for
setting the schedule.

Mon

Tue

Sort : New

WWWWWWW

We
We
Th

WWWWWWW

WWWWW
WWWWWW
WWWWWWWWWWWW

Sat

Sort : New

To check a schedule

English

Press B or b to highlight Set Timer and press OK.

English

CONTROLS AND FEATURES

Press C or c to select a day tab or Personal Mode tab.

To protect or unprotect a recorded programme

NOTE: If no titles have been registered to Personal
Mode, Personal Grouping will be grayed out.

Protecting a programme prevents it from being accidentally
deleted.
Select the title of the programme you want to protect and
press the GREEN button. icon appears next to the title and
the programme is protected.
If Protect is set to On when the programme is recorded,
icon appears next to the title of the recorded programme.

Press OK.
Viewing starts.
● icon appears next to the title currently being
recorded.
When the title currently being recorded is selected
and OK is pressed, playback will start from the
beginning of the programme currently being
recorded.

When a title with icon is selected and the GREEN button is
pressed, icon disappears and the programme is
unprotected.

To delete a recorded programme

Operations during viewing
The following operations can be performed using the remote
control buttons.
c
To PLAY
Z To SKIP-BACK
v
To STOP
CC To REWIND
W/w To PAUSE/STEP
cc To FAST FORWARD
To start Time Shift z To SKIP-FORWARD
Recording

Press the RED button. Check boxes will appear next to
the titles.
Press B or b to select the title you want to delete and
press OK. A check mark will be inserted in the check
box.

Library
Weekly

Operations from the Library screen

Sun

As well as viewing the list of recorded titles on the Library screen,
you can protect or delete titles and register titles to Personal
Mode.

WWWWW
WWWWWW
WWWWWWWWWWWW
WWWWWWW

To display the Library screen

a
b

Mon

Press MENU / C c / B / C c to highlight TV
Programmed / Programme Timers icons and press
OK.
Press B or b to select Library and press OK. The
Library screen will appear.

We
We
Th

WWWWWWW

Th
F

WWWWWWW

Library

Tue

Sort : New

To insert a check mark against all the titles, press the
GREEN button.
To uncheck all the check boxes, press the BLUE
button.

14:15 Wed, 16 Feb

Weekly
Sun

Mon

Tue

Wed

Thu

Fri

Sat

NOTE:
• A check mark will not be inserted against protected
titles.
• Note that once deleted, a title cannot be restored.

Sort : New
WWWWW
WWWWWW
WWWWWWWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW

1235 ITV London

ASTRA 19.2°E

10 July 2011 14:30(01:30)
USB HDD1
Remaining Capacity:
86% (912.0GB)

Press the RED button.
Select Yes in the confirmation window and press OK.
All the titles with check marks will be deleted.

CONTROLS AND FEATURES

a
b

Quick Menu
Personal Grouping

Recording Setup

Select the title you want to register to Personal
Mode.
Press the QUICK button to display the Personal
Mode registration menu.

You can set your preferences for One touch Recording or for
scheduling recording.

To set the recording time for One Touch Recording

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Preferences icon and
press OK.

Press B or b to select Recording Setup and press
OK.

None

Press C or c to select the Personal Mode to which
you want to register the title and press OK.

English

To register a recorded title to Personal Mode

Preferences

The title will be registered to the selected Personal
Mode.
You can remove a title from the registered Personal
Mode by selecting None.

Recording Setup
Camera Sensor Setup
Personal TV Setup
REGZA-LINK Setup

To check the remaining USB HDD capacity

Network Setup
Network Device Setup

You can check the remaining capacity of the USB HDD using
Remaining Capacity.

Photo Frame Setup
Teletext

Thu, 17 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 18 Feb 10:00
Sun, 18 Feb 10:00
Sun, 18 Feb 10:00
Sun, 18 Feb 10:00
Mon, 18 Feb 10:00

1235 ITV London

ASTRA 19.2°E

Recording Devices
One Touch Recording Time

Other useful functions
(Time Shift Recording)
If you move away from the TV for a while, such as when the
phone rings while you are watching TV, you can easily start
recording and then catch up with the programme later.

Press W/w on the remote control while viewing
DTV.
The screen will switch to the Pause image and
recording will start automatically.
The recording time is the time set in One Touch
Recording (see page 58).

Press c (play).
Catch-up viewing will start from where the
programme was paused.

Press B or b to select One Touch Recording Time.
Recording Setup

10 July 2011 14:30(01:30)
USB HDD1
Remaining Capacity:
86% (912.0GB)

NOTE: The remaining capacity displayed is only a guide; it is
not guaranteed.

Auto

Programme End Time

Start Padding Time

None

End Padding Time

None

Press C or c to select the recording time.
You can set the Programme End Time in 30-minute
increments in the range of 30 minutes to 360 minutes.

To set the padding time for programmed
recording start time and end time.

In the Recording Setup screen, press B or b to select
Start Padding Time.

Press C or c to select a time.
You can select from None, 1 minute, 3 minutes, 5
minutes and 10 minutes. Recording will start at the
selected number of minutes prior to the recording
start time.

Press B or b to select End Padding Time.

Press C or c to select a time.
You can select from None, 1 minute, 3 minutes, 5
minutes and 10 minutes.
Recording will end at the recording end time plus the
selected number of minutes.

English

CONTROLS AND FEATURES

Setting USB HDD Energy-Saving Mode

To register a USB HDD

In the Recording Setup screen, press B or b to select
Recording Devices and press OK.

Press B or b to select Device Energy Saving Mode.
Recording Devices
Device List
Device Energy Saving Mode

Normal

Press C or c to select Normal or Energy Saving.

NOTE:
• When set to Energy Saving, it may take a while for the USB
HDD to function.
• When set to Energy Saving, depending on the type of USB
HDD, the USB HDD indicator lamp may not indicate standby
status even when in standby status.

To change the name of the USB HDD

In the Recording Setup screen, press B or b to select
Recording Devices and press OK.

Press B or b to select Device List and press OK. The
Device List screen will appear.
Device List
Device Name
USB HDD 1

Registered

Press C or c to select Yes in the confirmation window
that will appear and press OK. USB HDD registration
will start. Wait until registration ends.
NOTE:
• If multiple USB HDD appear on the Device List screen, press
B or b to select the USB HDD you want to register.
• If a USB HDD is re-registered, it will not be formatted.

To format a USB HDD

Press the BLUE button on the Device List screen.
Press C or c to select Yes in the confirmation window
that will appear and press OK. Formatting will start.
Wait until formatting ends.

NOTE:
• If multiple USB HDD appear on the Device List screen, press
B or b to select the USB HDD you want to format.
• When the USB HDD is formatted, all the data stored on the
USB HDD will be deleted.

To disconnect a USB HDD

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight Preferences icon and
press OK.

Press B or b to select Recording Setup and press
OK.

Press B or b to select Recording Devices and press
OK. The Device List screen will appear.

Connected

Press the GREEN button.

Device List
Device Name
USB HDD 1

Edit the desired name by using the software keyboard
(page 55). The maximum number of characters is 10.
NOTE: If multiple USB HDD appear on the Device List screen
in Step 2, press B or b to select the USB HDD whose name
you want to change.

To perform a USB HDD operation test

Press OK on the Device List screen.

NOTE: The results of the device test are only a guide.
The device may not function as shown in the results.

Connected

Press the RED button.
Press C or c to select Yes in the confirmation window
that will appear and press OK. The Connected check
mark will be removed. Disconnect the USB HDD.

Press the YELLOW button on the Device List screen.
USB HDD operation test will start.
Wait until the test ends.

Registered

NOTE: If multiple USB HDD appear on the Device List screen,
press B or b to select the USB HDD you want to disconnect.

CONTROLS AND FEATURES

If programmed recording is not performed correctly or some
other error occurs, you can check the error content using
Recording Information. Up to 64 Recording Information
entries will be recorded and when the maximum is exceeded,
entries will be deleted starting from the oldest. You can delete
Recording Information after you have checked it.

a
b

Press B or b to select Recording Information and
press OK. The Recording Information screen will
appear.

15 / 64

8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00

The recorded Recording Information list will appear.
(Yellow) icon will appear next to unread
Recording Information.

To check the content of Recording Information

In the Recording Information screen, press B or b
to select the title you want to display.

Press the RED button.
Select Yes in the confirmation window that will
appear and press OK.
The selected Recording Information will be deleted.

Press QUICK to open the Quick Menu.

Recording Information

In the Recording Information screen, press B or b
to select the Recording Information you want to
delete and press OK.

Scheduling priority
If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When Start Padding Time and End Padding Time are set
(see page 63), the start time and end time will be the time
plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording will
switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may not
be recorded.
• When End Padding Time is set for the first programmed
recording (see page 63), depending on how far the
scheduling times overlap, the End Padding Time may be
ignored and recording of the next scheduled programme
may start. As priority is given to the time set in the Set Timer
menu over the Padding Time, recording will automatically
be triggered when the next scheduled programme start
time is reached during End Padding Time.

Press OK. The content of Recording Information will
appear.
Display Example
Recording Information
8888 ITV1 London Wed, 23 Feb 10:00 - 11:00
Scheduling Conflict
Could not record properly because there was a conflict with
another event of a higher priority

When you have checked the content, press BACK. The
screen will return to the previous screen.

English

To delete Recording Information

To confirm/delete Recording
Information

English

CONTROLS AND FEATURES

Using Toshiba Places

Using YouTube™

A new cloud based service, where content
(movies, photos, etc.) can be viewed and shared
across the web through a simple user interface
called “Toshiba Places”.

YouTube is a video-sharing service managed by
YouTube, LLC.
This TV allows you to view YouTube content.

NOTE: You need to configure a home network before using
this feature (see page 19).

Press
on the remote control, or press MENU / B /
C c to highlight Connected TV / Toshiba Places
icons and press OK.

Press BbC c to select the desired place and press
OK.

NOTE:
• Some features require an always-on broadband internet
connection, firmware update and/or additional bandwidth
dedicated to this product. Third party internet services may
change or be discontinued or restricted at any time. Toshiba
makes no warranties, representations, or assurances about
the content, availability or functionality of third-party
content or services. Use of third party internet services may
require registration by a computer and/or payment of
charges and membership. Not all services or content may
be available on this product, in your country or with your
language. In order to experience the full capabilities of this
product, fully compatible devices may be required. For
more information, visit
http://www.toshibaplaces.com/about.
• This service may be forcibly blocked according to the
situation of CSP service.

NOTE:
• You need to configure a home network before using this
feature (see page 19).
• If Network Lock is set to On, it will be necessary to enter
your four-digit PIN code in order to access network features
(see page 83).

Press MENU / B / C c to highlight Connected TV /
YouTube icons and press OK.
The YouTube top page will appear.

Press BbC c to select the file you want to view, and
press OK.

To close YouTube:

Press EXIT.

NOTE:
• This TV may not be able to perform all of the same
operations as a computer.
• Depending on the network environment and use case, you
may experience difficulty viewing content.
• Though the same volume value, actual volume might be
greatly different depending on contents.
• It may take time for the TV to load and begin playing back
content.
• Service content and the look and feel of the interface may
be changed at any time without prior notice.

CONTROLS AND FEATURES

The Function Menu provides easy access to functions that are
commonly used.

Press the BLUE button while displaying YouTube.
The Function menu window will appear.

Back

Forward

Reload

Home

Pointer

Press B or b to select Pointer: ON and press OK.

Press the BLUE button.

From the Function menu, press C or c to select
Pointer, and then press OK.

Press B or b to select Drag Mode and press OK.
•

http://www.youtube.com/xl

Press C or c to select the desired icon and press OK.
Item

e
f

Description

will appear.

Press OK, and then

changes to

Press BbC c to move the selected item in the
desired place.

Back

Returns to the previous page.

Forward

Moves to the forward page.

Switching the frame

Reload/
Abort

Updates the displayed page.
Aborts update
(
is displayed while reading, and
displayed in other case.)

From the Function menu, press C or c to select
Menu, and then press OK.

Press C or c to select Page Tasks.

Highlight Switch Frames and press OK.

Home

Returns to the top page of YouTube.

Pointer

Switches the pointer On/Off or drag mode.

Switches the frame or sets various settings.

Setting the view feature
Switching the pointer

From the Function menu, press C or c to select
Menu, and then press OK.

Press C or c to select View.

Press B or b to select the desired item and press OK.

Press B or b to select the desired setting and press
OK.

The tool that operates the screen can be changed to pointer
or drag mode.

a
b

From the Function menu, press C or c to select
Pointer, and then press OK.
If you select
, see “To use the Pointer: ON:” on this
page. If you select
, see “To use the Drag Mode:”
on this page.

To use the Pointer: ON:

•

Item

Press B or b to select Pointer: ON and press OK.

Normal: Displays YouTube page with the
size as it is.
Just-Fit Rendering: Displays YouTube page
at a size that has been adjusted to precisely
fit the width of your TV.

Text Size

Changes the font size of the screen. Select
from Largest, Large, Medium, Small or
Smallest.

will appear.

Press BbC c to the place where
and then press OK.

changes to

Settings

Display
Mode

NOTE: When Pointer: OFF is selected and BbC c is pressed,
the highlight moves to linked areas.

NOTE: This font size is effective only for the
page.

Advanced
Settings

See the next column.

Page
Information

Displays the information of the page you are
viewing.

Server
Certificates

Displays the server certification.

English

To use the Drag Mode:

Using the Function Menu

English

CONTROLS AND FEATURES

If you select Advanced Settings:
Item

Press BbC c to select the setting items, and press
OK. A check will appear in the box. To remove the
check, press OK again.

Press BbC c to select OK field and press OK.
Item

When jumping from a protected page to an
unprotected page, the message is displayed
when the check is applied to Notify of
secure/non-secure page changes.
Apply the check to select SSL version from
SSL Version to use (SSL2.0, SSL3.0,
TSL1.0).
A content confirmation of the certification
and a setting effect/non-effect can be done
in Root Certificates and CA Certificates
shown below.

Accept all: Cookie is received, and it records
in this TV.
Reject all: Cookie is not received.
Prompt before accepting: When Cookie is
received, a message window will be
displayed.

Delete
Cookies

Deletes all recorded Cookies.

Cache

Use cache: When the check is applied to
this, cache is used.
Delete All Cache Data: Deletes all the cache
data preserved in the television.

Browser
Information

Displays the information on a browser.

Description

Image

Sets display/non-display of images.

Table

Sets effect/non-effect of tables.

CSS

Sets effect/non-effect of CSS.

Pop-up
window

Sets effect/non-effect of pop-up windows.

Animation

Sets display/non-display of animations.

JavaScript

Sets effect/non-effect of JavaScript.

Word wrap

Sets effect/non-effect of Word Wrap. If Word
Wrap is enabled, a word not finished at the
end of a line is shifted to the next line.

RapidRender

Sets effect/non-effect of Rapid-Render. If
Rapid-Render is enabled, texts and links are
displayed first, and the images and the
tables, etc. are displayed afterward. The
highlight can be moved with the text and
the link displayed.

Settings

Security

NOTE:
• Cookie is the technical information that a website leaves in
this TV so that the website will recognize you when you use
it again.
• Cache is a system used to shorten the display time by
checking the past data preserved in this television when a
page that you viewed before is seen again.

Setting other features

From the Function menu, press C or c to select
Menu, and then press OK.

Press C or c to select Settings.

Press B or b to select the desired item and press OK.

Press B or b to select the desired setting and press
OK.

To confirm Root Certificates or CA Certificates:

Press B or b to select Security in step 3 in Setting
other features.

Press BbC c to select Root Certificates or CA
Certificates and press OK.

Press B or b to select the desired certificate.
• When OK is pressed, a detailed information window
will appear.
• When the BLUE button is pressed, Disable or
Enable bar will appear. It changes whenever BLUE
button is pressed.

Press BACK.

CONTROLS AND FEATURES

Hybrid TV Standard enables the TV to receive
HbbTV services. TV services which support this
feature often show “press RED” on the screen.
NOTE: You need to configure a home network before using
this feature (see page 19).

Using the Media Player
This TV allows you to enjoy movie, music and
photo files stored on a USB device connected to
the USB port.
Moreover, you can also play photos, movies or
music files from your PC by connecting the TV to
your home network.
Terminology:

Press MENU / C c / B / C c to highlight Setup /
Preferences icon and press OK.

DMP: DLNA CERTIFIED™ Player

Press b to select Hybrid TV Standard.

DMR: DLNA CERTIFIED™ Renderer

Press C or c to change from Disabled to Enabled.
When changing from Disabled to Enabled, a
Network Connection Test is performed. If the result
is OK, then the setting changes to Enabled. If not, the
setting remains Disabled.

DMS: DLNA CERTIFIED™ Server
DMC: DLNA CERTIFIED™ Controller

When “press RED” is indicated on the screen, press
the RED button to access HbbTV service site, and then
press B b C c to select the desired contents.
NOTE:
• This service is not available outside Germany.
• The HbbTV service indication or required key operations
may not be possible depending on the service contents. In
this case, set the Hybrid TV Standard setting to Disabled.
• Toshiba makes no warranties, representations, or
assurances about the content.

• DMP: The TV can control and play content from a DMS.
- A DMS is a device that can function as a server for DMP or
DMR.
• DMR: The TV can play content from a DMS. Playback is
controlled by a DMC.
- A DMC is a device that can instruct the TV to display
content.
NOTE:
• Do not insert/remove USB device while in use.
• MENU is not available during playback.
• When you want to use your TV as a DMR, set Media Renderer
to On (see “Media Renderer” on page 56).

Media Player Specifications
Device
USB device
Interface version: USB2.0 HS
USB Mass Storage Class devices (MSC)
NOTE:
• Connectivity is not guaranteed for all devices.
• A USB hub can not be used.

File system: FAT16 and FAT32
Maximum memory size: Unlimited
DLNA CERTIFIED™ Server: Your PC (for example)
You must obtain any required permission from
copyright owners to download or use copyrighted
content. TOSHIBA cannot and does not grant such
permission.

English

Using Hybrid TV Standard
(if available)

English

CONTROLS AND FEATURES

Manual Start:

Basic operation

Using Media Player with USB
When Auto Start is enabled, you will be asked if you
want to start the Media Player whenever a USB device
is inserted. If Auto Start is disabled (or if you want to
connect to a DMS on the network), you must manually
start the Media Player from the menu.

Insert USB device into the USB socket on the left side
of the TV.

Press MENU / C c to highlight Media Player icon.

Press B / C c to highlight Photo, Movie or Music
icon and press OK. The contents list will appear.

To change the Auto Start setting:

a
b

Press MENU / C c / B / C c to highlight Media
Player / Media Player Setup icons and press OK.

To select a file in the list of contents:

Press B or b to select USB Auto Start, and then press
C or c to select On or Off.

Press Bb (C c) to select a file or folder.
Press OK to move to the next layer, or press BACK to
return to the previous layer.

Media Player Setup
USB Auto Start

DivX® VOD
Media Server Setup

To close the Media Player:

Press EXIT.

Auto Start:

Insert USB device into the USB socket on the left side
of the TV. A prompt will appear.

Press C or c to select Yes, and then press OK.

Press B or b to select Photo, Movie, or Music and
press OK.

Using the Media Player with a DLNA CERTIFIED™
Server
You need to configure a home network before using
this feature (see page 19).

Press MENU / C c to highlight Media Player icon.

Press B / C c to highlight Photo, Movie, or Music
icon and press OK. The thumbnail (for Photo) or list of
files (for Movie and Music) will appear.

NOTE: If Auto Start is set to Off, you can start the Media
Player manually.

NOTE: If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press OK.

Press B or b to select a DMS if the selection window
is displayed.

To select a file in the list of contents:

a
b

Press B or b to select a file or folder.
Press OK to move to the next layer, or press BACK to
return to the previous layer.

To close the Media Player:

Press EXIT.

CONTROLS AND FEATURES

a
b

Viewing photo files (on a DLNA
CERTIFIED™ Server or USB device)

Press QUICK to open the Quick Menu in list mode or
Multi View mode.

There are three types of viewing modes.

Press B or b to select Device Information.

Multi View
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each
image file.

Setting DLNA CERTIFIED™ Server waking up:
You only need to complete the Media Server Setup if
you wish to use the “Wake-on-LAN” feature.

Press MENU / C c / B / C c to highlight Media
Player / Media Player Setup icons and press OK.

Press B or b to select Media Server Setup and press
OK. A list of currently available DMSs will appear.

Press B or b to select the desired device, and press
OK. A check will appear in the box. To remove the
check, press OK again.

Photo list example

PHOTO
/Folder

Sort: Title

1/54
XXXXXXXXXXX.jpg

10:00 Fri, 21 Feb 2010
1920x1080

OK Select QUICK Features P Page

Press c to highlight Done, and then press OK to save.

NOTE:
• Up to 8 DMSs can be selected.
• Even if the device checked is powered off, it will be
displayed but grayed out in the Select Device window.
When OK is pressed on a highlighted grayed out item, a
confirmation of Wake-on-LAN is displayed. The TV tries to
wake up the DMS if Yes is pressed. The Server will start if it
supports Wake-on-LAN feature.
• When some DMSs are connected, it may take time until the
list is displayed. The list may be refreshed by the following
operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.

USB 2 Port Setup (if available)

Press MENU / C c to highlight Setup icon.

Press B / C c to highlight System Setup icon and
press OK.

Press B or b to select USB 2 Port Setup and press C
or c to select Recorder or Media Player.

The initial highlighted position will be on the top left
thumbnail in the Multi View.

Press B b C c to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing C at the top left thumbnail, the screen will
move to the previous page. Conversely, when
pressing c at the bottom right thumbnail, the screen
will move to the next page.
PU Pu buttons can be used to page up/down the
photo list when there are more photos than will fit
onto one screen. When the PU Pu buttons are
pressed, the highlight shall be on the photo at the top
left of Previous/Next list.

b
c

When you select a folder, press OK to move to the
next layer. Press BACK to move back to the previous
layer.
Press OK to view the selected photo in Single View
mode.

NOTE: When the TV is used as a DMR, this feature is not
available.

Single View
In this mode, only files located in the selected directory will be
displayed. This view allows you to change the photo content
manually. When moving from Multi View to Single View, the
currently selected photo will be displayed.

English

To display the device information:

English

CONTROLS AND FEATURES

a
b
c

To zoom in/out photos

Press c to view the next photo. Press C to view the
previous photo.

During the Single View mode or Slide Show mode, the zoom
function can be used.

Press B to rotate the image 90° clockwise. Press b to
rotate the image 90° counterclockwise.

RED button: x1 S x2 S x4 S x8 S x16 zoom
GREEN button: x16 S x8 S x4 S x2 S x1 zoom
BACK button: Normal playback

Press
to display file status information (file
number, photo title, date and time taken, resolution
etc.).

B b C c buttons: Vertical or Horizontal scrolling
To set the shuffle mode (USB only):

NOTE:
• The information may not be correctly displayed depending
on the content, DMC or DMS.
• You can not rotate in 3D (2D to 3D) mode.

Slide Show
This view allows you to watch a slide show of your photos. In
this mode, only files located in the selected directory will be
played.

Press QUICK to open the Quick Menu in list mode.

Press B or b to select Shuffle.

Press C or c to select On or Off.

To sort the folders and files

Press QUICK to open the Quick Menu from Multi
View mode.

To start slideshow, press OK in the Single View mode.

Press C or c to view the previous/next photo.

Press B or b to select Sort.

Press B or b to rotate the photo.

Press C or c to select Title / File Name, New or Old
to set the sorting rule.

Press

to display file status information.
Item

To set Interval Time and Repeat settings:

File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order

File Name
(USB)

File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order

New

From new to old according to the date and
time when the picture was taken.

Old

From old to new according to the date and
time when the picture was taken.

Press QUICK to open the Quick Menu while in the
Single View mode or Slide Show mode.

Press B or b to select either Interval Time or Repeat.

Press C or c to adjust the setting and press OK.

To set Background Music

Press QUICK to open the Quick Menu while in the
Slide Show mode.

Press b to select Select Music and press OK.

Press B or b to select Background Music and press
OK.

Press B or b to select Background Music and press
C or c to select On.

Description

Title (DMS)

NOTE: Sorting may not be supported by some DMSs.

To display the device information

Select a music file.

NOTE:
• The music must be selected from the same media (USB)
device or DMS from which the picture files will be played.
• This feature is not available when there is no music that can
be selected.

a
b

Press QUICK to open the Quick Menu from Multi
View mode.
Press B or b to select Device Information and press
OK.

NOTE: When the photos on the USB device are used, or the TV
is used as a DMR, this feature is not available.

CONTROLS AND FEATURES

During playback:

• Press W/w to pause.
You can move to the desired replay position by pressing C
or c during PAUSE.
PAUSE or operations during PAUSE may not be available
depending on the contents, DMC or DMS.
• To resume normal playback, press c (play).
• To play in fast reverse or fast forward directions, press CC
or cc during playback. Each time you press the CC or cc,
the playback speed will change.
PAUSE or operations during PAUSE may not be available
depending on the contents, DMC or DMS.
• To locate a specific file, press Z or z repeatedly.
• Press
to display the file status information (content
number, movie title, progress time etc.).

Press EXIT. The television will return to the last viewed
channel or external input.

File Compatibility
See page 105.

Viewing movie files (on a DLNA
CERTIFIED™ Server or USB device)
You can select movies from a list of available files.
Movie list example

MOVIE

NOTE:
• The information may not be correctly displayed
depending on the contents, DMC or DMS.
• During playback, you can adjust the Picture, Picture Size
and Sound menu functions from the Quick Menu.

/Folder

Sort : File Name
movie
Unprotected
WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4

To select subtitle and audio languages

WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4
WWWWWWWWWWWWW.mp4
1/9

OK Play

a
b
c

QUICK Features P Page

Press B b to select a file or folder. PU Pu buttons
can be used to page up/down the movie list when
there are more files than will fit onto one screen.
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the previous
layer.

NOTE: This feature may not be available depending on the
contents.

To set the repeat mode

Press QUICK to open the Quick Menu.

Press C or c to select Off, All or 1.

With the desired file selected, press OK or c (play) to
start playback.
NOTE:
• On preview screen, if you highlight the file without
pressing OK, the content is played on a preview
screen. When OK is pressed, it is played in full screen
mode.
• Depending on the file size, it may take some time to
start playback.

• Press SUBTITLE repeatedly to select your preferred subtitle
language.
• Press s repeatedly to select your preferred audio
language.

Press v to stop playback.

NOTE:
• If playback finishes before v is pressed, the screen will
return to the list.
• Depending on the file size, it may take some time for
playback to begin.

Mode

Description

Off

The file is played back only once.

All

Files in the same folder are repeatedly
played back.

The same file is repeatedly played back.

Press BACK.

NOTE: When the TV is used as a DMR, this feature is not
available.

English

To close the Photo Viewer

English

CONTROLS AND FEATURES

To sort the folders and files

To register your TV to a DivX® account

Press QUICK to open the Quick Menu in list mode.

Press B or b to select Sort.

This TV allows you to play back files purchased or rented from
DivX® Video-On Demand (VOD) services. When you purchase
or rent DivX® VOD files on the internet, you will be asked to
enter a registration code.

Press C or c to select Title / File Name, New or Old
to set the sorting rule.
Item

Title (DMS)

File Name
(USB)

Press MENU / C c to highlight Media Player icon.

Press B / C c to highlight Media Player Setup icon
and press OK.

Press B or b to select DivX® VOD and press OK.

Press B or b to highlight DivX® VOD Registration
and press OK.

Description
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ...,Z),
small alphabet (a, b, ..., z)
3. Increasing order
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), alphabet (A, B, ...,Z)
3. Increasing order

New

From new to old according to the date and
time when the contents were updated.

Old

From old to new according to the date and
time when the contents were updated.

DivX® VOD
DivX® VOD Registration
DivX® VOD Deactivation

The DivX® VOD window will appear and you will see
the registration code. For details on registration,
please visit the DivX® website at
http://vod.divx.com

NOTE: Sorting may not be supported by some DMSs.

To display the device information

a
b

Press QUICK to open the Quick Menu in list mode.
Press B or b to select Device Information and press
OK.

NOTE: When movies on a USB device are used, or the TV is
used as a DMR, this feature is not available.

To close the Movie Viewer

Press EXIT.

Copy the activation file to a memory device and play
it on the TV.

To deactivate your device

a
b
c

File Compatibility

In step 4 above, highlight DivX® VOD Deactivation,
and then press OK.
A confirmation message will appear. Select Yes and
press OK.
The DivX® VOD window will appear and you will see
the deactivation code. For details on registration,
please visit the DivX® website at
http://vod.divx.com

See page 105.

ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, Inc. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code,
locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your
registration.
DivX Certified® to play DivX® and DivX Plus™ HD (H.264/MKV)
video up to 1080p HD including premium content.

CONTROLS AND FEATURES

Playing music files (on a DLNA
CERTIFIED™ Server or USB device)

• To play in fast reverse or fast forward directions, press CC
or cc during playback. Each time you press the CC or cc,
the playback speed will change.
• This TV generates original chapter point in 10% increments
for 10 chapters in total, that are accessible by using the
Number buttons on the remote control.

You can listen to music from a list of available files.
Music list example

MUSIC

During playback, press z to skip to the beginning of the next
chapter. When z is pressed twice in succession, it will repeat
two times of above. If z is pressed at the last chapter,
playback will skip to the beginning of the next content.

Title : WWWWWWWWW
Artist : WWWWWWWWW
00:00:34 / 00:05:19

/Folder

Sort : File Name
music
Unprotected
WWWWWWW.mp3

Press Z to skip to the beginning of the current chapter.
When Z is pressed twice in succession, it will skip to the
beginning of the previous chapter. If Z is pressed twice in
succession at the first chapter, stop playing the current
content and skip to the beginning of the previous content.

WWWWWWW.mp3
WWWWWWW.mp3
WWWWWWW.mp3
WWWWWWW.mp3
WWWWWWW.mp3
WWWWWWW.mp3
WWWWWWW.mp3
1 / 10

The Number button is used for direct jump. If the 3 button is
pressed, playback will jump to the beginning of 3rd chapter.
Even if the playback content have authored chapters, the
Number button is used to jump directly to Auto Generated
Chapter.
If the content has Authored Chapters, Z / z are using for
Authored Chapters.

OK Play

a
b

NOTE: Depending on the content data will not be operated.

Using Multi Title and Alternative Timelines Multi
Title

QUICK Features P Page

Full Screen

Press B b to select a file or folder. PU Pu buttons
can be used to page up/down the music list when
there are more files than will fit onto one screen.
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the previous
layer.
With the desired file selected, press OK or c (play) to
start playback.

DivX Plus HD files may contain up to 100 titles.
NOTE: OK takes to you full screen playback. Playback
in preview start without pressing OK.
Moving cursor up/down plays music.

You can change the title (It contains same video file) by
pressing the RED button.
When the RED button is pressed, it will display the title
change window at the bottom on the screen (same as Subtitle
or Audio change window).
The title is changed cyclically each time the RED button is
pressed. Playback will start from start time of selected title
each time you press B or b.
NOTE: Depending on the content data will not be operated.

Press v to stop playback.

NOTE:
• Depending on the file size, it may take some time for
playback to begin.
• During playback, you can adjust the Sound menu functions
from the Quick Menu.

During playback in full screen:
• Press W/w to pause.
• To resume normal playback, press c (play).
• You can move to the desired replay position by pressing C
or c during PAUSE.
PAUSE or operations during PAUSE may not be available
depending on the contents, DMC or DMS.
• To play in fast reverse or fast forward directions, press CC
or cc. Each time you press CC or cc, the playback speed
will change.
PAUSE or operations during PAUSE may not be available
depending on the contents, DMC or DMS.

English

To playback DivX Plus HD content:

English

CONTROLS AND FEATURES

To set the repeat mode:

To display the device information

Press QUICK to open the Quick Menu in list mode.

Press B or b to select Repeat.

Press C or c to select Off, All or 1.
Mode

Description

Off

Files in the same folder are played back
once.

All

Files in the same folder are repeatedly
played back.

The same file is repeatedly played back.

Press QUICK to open the Quick Menu in list mode.
Press B or b to select Device Information and press
OK.

NOTE: When music files on a USB device are used, or the TV is
used as a DMR, this feature is not available.

To display the file status information

a
b

Press
during playback. The information will be
displayed on the bottom of the screen.
Press

Press BACK.

NOTE: When the TV is used as a DMR, this feature is not
available.

To set the shuffle mode (USB only):

Press QUICK to open the Quick Menu in list mode.

Press B or b to select Shuffle.

Press C or c to select On or Off.

To close the Music Player:

Press EXIT.

File Compatibility
See page 105.

To sort the folders and files

Press QUICK to open the Quick Menu in list mode.

Press B or b to select Sort.

Press C or c to select Title / File Name, New or Old
to set the sorting rule.
Item

again to remove the information.

NOTE: The information may not be correctly displayed
depending on the content, DMC or DMS.

Description

Title (DMS)

File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), alphabet (A, B, ...,Z)
3. Increasing order

File Name
(USB)

File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), alphabet (A, B, ...,Z)
3. Increasing order

New

From new to old according to the date and
time when the contents were updated.

Old

From old to new according to the date and
time when the contents were updated.

NOTE: Sorting may not be supported by some DMSs.

CONTROLS AND FEATURES

Press c to select Start and press OK to open Photo
Frame.

You can use the TV screen as a digital photo frame. One image
(pre-installed or user-installed) can be displayed. Date info
can also be superimposed, if desired.
You can overwrite the photo file with a file from a USB storage
device or DLNA CERTIFIED™ Server.

To open Photo Frame

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select Photo Frame Setup and press
OK.

To open from the Quick Menu

Preferences
3D Setup

Recording Setup
Personal TV Setup
REGZA-LINK Setup

Press B or b to select Photo Frame and press OK to
open Photo Frame.

To close Photo Frame:

Network Setup

Network Device Setup
Photo Frame Setup
Teletext

Press QUICK to open the Quick Menu.

Press EXIT.

Auto

Setting the features

The preview screen will appear.

In the preview screen, you can set various settings for Photo
Frame.

Photo Frame Setup

Photo Select

a
Photo Select
Photo Edit
Settings

In the Photo Frame Setup menu, press B or b to
select Photo Select and press OK.

Photo Frame Setup

Start

OK Enter

Photo Select
Photo Edit
Settings

Start

OK Enter

If the device selection screen appears, press B or b to
select the appropriate device and press OK.

English

Using the Photo Frame feature

English

CONTROLS AND FEATURES

Press B b C c to select the photo you want to copy
from the USB storage device or DLNA CERTIFIED™
server to the TV’s flash memory, and then press OK.

PHOTO
/Folder

Settings

Press B or b to select Settings and press OK.

Press B or b to select Clock, Position or Auto Power
Off.

Sort: Title

Settings
--/-- (---)
-- 10:10

1/54
XXXXXXXXXXX.jpg

10:00 Fri, 21 Feb 2010
1920x1080

Clock
Position
Auto Power Off

OK Select QUICK Features P Page

Photo Edit

OK Enter

Press B or b to select Photo Edit and press OK.

Press B or b to select Rotate or Delete.

Rotate
Delete

OK Enter

Set the following items as required.
• Clock — Press C or c to select Off, Digital Clock,
Analogue Clock or Analogue + Digital.
• Position — Press C or c to select Left or Right.
• Auto Power Off — Press C or c to select Off,
00:30, 01:00, 02:00, 04:00, 06:00 or 12:00.
If the Photo Frame window is left open, the TV will
automatically turn off after the set length of time
(maximum 12 hours).

Photo Edit

Off
Left
Off

Press BACK.

Select Start and press OK.

Apr/26 (Tue)
AM 10:53

Set the following items as required.
• Rotate — Press OK to rotate the image
90°clockwise.
• Delete — Press OK. A confirmation window will
appear. Press C or c to select Yes, and then press
OK.

Press BACK.

NOTE:
• The clock display will only appear when time from a digital
broadcast is available.
• The photo and clock displays are moved by 4 dots every 5
minutes to minimize the risk of screen burn-in.
• The pre-installed photo file is stored in the TV’s flash
memory before shipment.
• Picture Size selection (Normal/ Dot by Dot) is available by
pressing the QUICK button. However when the resolution is
1920 x 1080 or above, the Picture Size selection menu will
be grayed out.

CONTROLS AND FEATURES

English

Other features

The timers

Panel Lock

Programme Timers – digital only

Panel Lock disables the buttons on the television. All buttons on
the remote control can still be used.

This feature will set the television to go to a specific channel at a
certain time. It can be used to view a particular programme, or by
setting the mode to daily or weekly, can be used to view a series
of programmes.

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press MENU / C c / B / C c to highlight TV
Programmes / Programme Timers icons and press
OK.

Press b to select Programme Timers and press OK.

Press b if necessary to select an open timer position,
then press OK. The Set Timer menu will now appear
on screen.

Press B and b to go through the list adding the
details of the programme by using the number
buttons and C and c to make selections.

Preferences
Personal TV Setup
REGZA-LINK Setup
Network Setup
Network Device Setup
Photo Frame Setup
Teletext

Auto

Network Lock
Panel Lock

Off

When Panel Lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby button
is pressed, the television will switch off and can only be
brought out of standby by using the remote control.

Set Timer

10:50 Tue, 26 Apr

Timer Type

Reminder
30 CABC Channel

Channel

Tue, 26 Apr 2011

Date
Start Time

10:51

End Time

11:51

Repeat

Once
—

Recording Device

—

Protect

Off

Personal Grouping

None

Subtitle

Off
Set Timer

Delete Timer
Edit

When all of the details have been entered, highlight
Set Timer and press OK to save the timer.
The ORANGE/RED programme timer indicator on the
front of the television will be lit (see page 100 for
details).

PLEASE NOTE: When a timed programme is about to start, an
information screen will appear offering the option of
watching or cancelling the programme. The menus and other
channels will not be available during the timed programme
unless the programme timer is cancelled.
It will only be possible to create or edit programme timers for
the currently tuned DTV input.

English

CONTROLS AND FEATURES

On Timer

Sleep Timer

The feature allows you to set the television to turn on
automatically to a preset channel at a certain time of day or after
a certain length of time.

The television can be set to turn itself Off after a certain length of
time.

Press MENU / C c / B / C c to highlight Function /
On Timer icons and press OK.

Press B or b to select Enable On Timer and press C
or c to select On.

a
b

On Timer
Enable On Timer

Use the number buttons to set the desired time. For
example, to switch the television off in one and a half
hours enter 01:30, or press c / C to increase/decrease
in steps of 10 minutes. (Maximum time setting is 12
hours)

Enable DTV Clock

Power On Time

00:00

Repeat

Once

Input

DTV

Channel

c
d

12 ABC
20

Volume

00:00

Time Until Power On
Done

Press b to select Enable DTV Clock, and then press C
or c to select On or Off.

Press B or b to go through the list adding the details
of the On Timer by using the number buttons and C
and c to make selections.
Power On Time (only for DTV Clock On mode): Set
the time you prefer with the number buttons.
Repeat (only for DTV Clock On mode): Select the
desired On Timer operation (Once, Every Day, MonFri, Mon-Sat, Sat-Sun).
Input: Select a video input source (ATV, DTV, EXT 1,
EXT 2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC).
Channel: Set the channel that will be tuned when the
television turns on.
NOTE: When an external input is selected in the Input
field, a channel cannot be selected.
Volume: Set the volume that will be applied when
the television turns on.
Time until Power On (only for DTV Clock Off mode):
Set the amount of time from now until the TV turns on
using the number buttons (maximum of 12 hours).

Press MENU / C c / B / C c to highlight Function /
Sleep Timer icons and press OK.

Press B or b to highlight Done and press OK.

To cancel the On Timer

In the On Timer menu, select Enable On Timer.

Press C or c to select Off.

Press EXIT to finish.
To cancel the Sleep Timer, enter all zeros for the
above setting.

CONTROLS AND FEATURES

Digital on-screen information
and Programme Guide

Automatic Power Down

When viewing in digital mode, the on-screen
information and programme guide provide access
to programme details for all available channels.

The TV will automatically turn itself off (standby) after 4 hours, if
you do not operate the TV either from the remote control or the
TV control panel.

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select Energy Saving Settings and
press OK.

Press B or b to select Automatic Power Down.

Information

Press
, the information screen will appear giving
details of the channel and programme currently
being viewed.
Display Example
8888
REC

Press C or c to select On or Off, and press OK.

D+

NOTE:
• This feature is set to On when Location is set to Home.
• 1 minute before switching to standby, a Warning message
will appear.
• When the following features are set, the feature that is set
for the nearest time will function.
- Automatic Power Down
- Sleep Timer
- Photo Frame/Auto Power Off
- Auto shutdown after 1 hour of inactivity (after power on
by On Timer)
- No signal auto power off (after 15 minute of no signal)

ITV1 London

ASTRA 19.2°E

AD English

2D Side by Side

Now MLB Young’s two-run triple leads AL over NL
AD 18
News

6:00- 8:00

8:00- 9:00

World News and Sports

15 min left

Also MLB Young’s two-run triple leads AL over NL
Change

b
c

The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:

Press B or b to select the “Now”, “Next” or “Also”
information guide.
To record the next scheduled programme, select
“Next” and press OK. The Set Timer screen will
appear.
10:50 Tue, 26 Apr

Set Timer
The Daily Politics

• Low signal strength of analog channel (no signal detection)
• Only Audio L/R is connected to external input to listen to
music through the TV speakers.
In the Energy Saving Settings menu, press B or b to
select No Signal Power Down and press OK.

2 CABC Channel
11:30 - 12:30 Tue, 26 Apr
Timer Type

Reminder
—

Recording Device

—

Programme Tracking

Protect

Off

Personal Grouping

6:00 Thu, 11 Oct
USER Name 3

8888 ASTRA 19.2°E

HD 16:9

No Signal Power Down

English

Energy Saving Settings

Subtitle

Press B or b to select the item you want to change
and press C or c to select On or Off.

None
Off

Change Time

NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before turning off.

Set Timer

Delete Timer
Edit

English

CONTROLS AND FEATURES

Guide

The details of the programme will already have been
added to the timer. Highlight Set Timer and press OK
to save.

To indicate that a Recording Timer has been set, a
clock icon will be displayed in the Next and Also fields
of the information screen. A check mark will appear if
the timer is a Reminder Timer.

Select the on-screen guide by pressing GUIDE, and
the Guide screen will appear highlighting details of
the channel and programme currently being viewed.
This may take a few moments to appear.
10:50 Tue, 6 Apr

Thu6

Press b to select Also. Details of programmes that
have started on other channels will be provided. Use
C or c to change the display contents.

6 M6

18:00

18:30

19:00

19:30

09 LES SIM... 33 LES SIM...
06 TOP MODEL
09 LES SIMPSON
10 SUMMERLAND 53 SUMMERLAND

9 W9
11 NT1

20:00

44 LES SIM...

08 Nicky La... 32 Street fight... 59 Dragon B... 24 Dragon B... 48 K 2000

31 PARIS PREMIERE

To display More Information

34 AB1

Press QUICK to open the Quick Menu.

800 FlowerGd 6Mbs

Press b to highlight More Information and press OK.

06 MA SORCIE...

39 HAPPY DAYS 39 HAPPY DAYS

00 Evamag 27 21 jump street 14 Jerry Springer Show 54 City guys 17 L...

801 FlowerGd 4Mbs
802 FlowerGd 2Mbs
804 Codec 4:3
806 ITV1

On-screen Information icons
Icon

Service info

807 ITV3
808 ITV2

Description

809 ITV4

Service type
(TV, Radio, Text)

You can switch the time scale to 1.25 or 2.5 hours by
pressing the GREEN button.

Skip
Audio info

Mono

NOTE: Channels are displayed in groups by service
type (TV, Radio, Text). Pressing the TV button will
switch the service type.

Stereo
Dual mono
Multichannel
D

Dolby Digital

D+

Dolby Digital+

HE-AAC

Audio Coding

Audio Description

Audio/Subtitle
info

For Hard of Hearing

Recording info

●REC

Recording + Service
info

3D info

3D
3D→2D
2D→3D

Frame Packing
Side by Side
Top and Bottom

Personal Mode
info
Event info

Personal Mode
(Personal Name)
HD, SD

Video format (HD, SD)

16:9, 4:3

Video Aspect

Teletext
Multi-audio track
Parental rating
Encrypted
Timer info

Recording

For details of other programmes currently available,
press B and b to scroll up and down the channel list.
As channels are selected, details of the programme
currently being broadcast will appear. Press C or c to
view information for future programmes.
For information on a highlighted programme, press
.
To set the timer for that programme, press the BLUE
button to bring up the Programme Timers menu.
NOTE: In order for the recording operation to work
properly, the media recorder must be set to the same
time as the TV. Regarding the process for recording,
please refer to the owner’s manual of the recording
equipment.

Subtitle (Single, Multi)
0, 4 – 18

Press C or c for information on other programmes
scheduled for the channel selected. To highlight the
first programme in the genre grid, press the RED
button.

Reminder

Press Pu to advance to the next page, or press PU to
go back to the previous page.

CONTROLS AND FEATURES

Digital settings – parental control

From the Guide screen, you can use the genre selection and
search features.

In order to prevent viewing of unsuitable films and
programmes, channels and menus can be locked
in digital mode. These can then only be accessed
with a security code PIN.

a
b

In the Guide screen, press QUICK.
Press B or b to highlight Genre Colour in the Quick
Menu and press OK.
Genre Colour
Movies

Parental PIN Setup

Press MENU / C c / B / C c to highlight Setup /
System Setup icons and press OK.

Press B or b to select DTV Settings and press OK.
System Setup

Colour Setup

Menu Language

English
Germany

Country

With the focus on a particular genre, press the desired
coloured button to assign. Four colours will be
available to set. Press BACK to go back to the Guide
screen.

Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning

DTV Settings

Press the YELLOW button to access the Genre
Search screen.

Genre Search

10:50 Tue, 6 Apr

Quick Setup

Movies
34 AB1

Hard Rain

31 PARIS PREMIERE Red Corner
11 NT1

Thu,28 Apr 1:20- 3:00

9 W9

A Vow to Kill

Fri,29 Apr 1:30- 3:00

Parenthood

Sat,30 Apr 0:45- 2:40

11 NT1

Body and Soul

Sat,30 Apr 1:15- 3:00

11 NT1

Channels
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting

Sat,30 Apr 15:00- 17:30

Red Corner

Sat,30 Apr 23:20- 1:15

The Real Blonde

Sun,1 May 0:40- 2:00

31 PARIS PREMIERE Critters

DTV Settings

Wed,27 Apr 22:15- 23:55

34 AB1

9 W9

Wed,27 Apr 0:15- 1:45

The Lawnmower Man

31 PARIS PREMIERE The Nun’s Story

Press B or b to highlight Parental PIN Setup and
press OK.

Standby Channel Update
Dynamic Scan

Sun,1 May 0:40- 2:20

11 NT1

Indiana Jones and the Temple of Doom Sun,1 May 21:10- 23:20

11 NT1

The jackal

Sun,1 May 23:20- 1:15

34 AB

Coup De Ville

Mon,1 May 1:10- 3:00

Off
Standard

DVB Character Set

Press C or c to select the genre. Programmes listed
will change for the new genre. Press B or b to
highlight a particular programme.

Using the number buttons enter a four digit number.
Once entered you will be prompted to confirm by
entering again.
Parental PIN Setup
New PIN:

* * * *

Confirm PIN:

g
h

When a current programme is selected, pressing OK
will tune to that programme. When a future
programme is selected, pressing OK will open the Set
Timer menu.

The PIN number is now set.
If the PIN code has been set, when Auto Tuning and
Reset TV are executed, entering the PIN will be
necessary. “0000” is not acceptable.

For information on a highlighted programme, press
.
To exit the Genre Search and go back to the Guide
screen, press the YELLOW button.

English

Genre selection/searching

English

CONTROLS AND FEATURES

Parental Setup
The Parental Control feature allows you to block programmes
according to their rating levels. If a PIN has been set, you will need
to enter it before adjusting the level.

a
b

Selecting favourite channels

In the DTV Settings menu, press B or b to select
Parental Control and press OK.
Press B or b to select Parental Setup or Playback
Setup (if available).
Parental Setup: Select when you want to set viewing
restrictions on broadcast programmes.
Playback Setup: Select when you want to set
viewing restrictions on playback of programmes
recorded to the USB HDD.

Digital settings – Channel
Options

Use C or c to choose an option (None or an age
setting (4-17 or 4-18 depending on the Country
setting)).

Favourite Channels creates a list of the digital channels that
are watched most. Four lists can be created, they can be a
mixture of television, radio and text channels.

Select a channel you want to add to your favourite list.

Press QUICK to open the Quick Menu.

Press b to select Channel Options and press OK.

Press c repeatedly to select the favourite list (Fav.1-4).
Channel Options
Fav.

Parental Control
Parental Setup

None

Playback Setup

To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.

Press OK to select the ones required. A tick will appear
in the box as they are selected.

Repeat steps 1 through 5 for other channels.

When all favourites have been selected, press EXIT.

Network Lock
You can use the Network Lock feature to prevent the Web
browser from launching. When this feature is set to On, PIN input
will be necessary to use YouTube.
This feature will be grayed out until a PIN is set.

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or bto select Network Lock.

Favourite Channel Lists

a
b

Favourites 1
6 M6

Personal TV Setup

9 W9

REGZA-LINK Setup

11 NT1

Network Setup

31 PARIS PREMIERE

Network Device Setup

34 AB1

Photo Frame Setup

51 ITV1
Auto

Network Lock

Off

Panel Lock

Off

Press C or c to select On.

To unlock the Network:

Press C or c to select Favourites 1-4. The number of
favourites available depends on how many lists have
been created.
Channel List

Preferences

Teletext

Press LIST to display Channel List.

Select Off in step 3 above.

Press B or b to highlight a channel and press OK to
watch.

CONTROLS AND FEATURES

This feature allows you to set channels that will be skipped when
Pu or PU are used to tune.

Subtitles

Select the channel you want to skip in your channel
list.

From the Quick Menu, press b to select Channel
Options and press OK.

Press c repeatedly to highlight the skip (8) box.

Press OK to select. A tick will appear in the box.

Repeat steps 1 through 4 for other channels.

Press EXIT.

In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.

In the DTV Settings menu, press B or b to select
Subtitle and Audio and press OK.

Press b to select Subtitle Display and use C or c to
select On or Off.
Subtitle and Audio
Subtitle Display

NOTE: Skipped channels cannot be selected by Pu or
PU but still be accessed by direct number entry
(when tuned a 8 icon will be displayed in the
banner to indicate as a skipped channel).

Locking channels
Locking Channels stops the viewing of digital channels, and
they can only be accessed by entering the PIN.

Select the channel you want to lock in your channel
list.

Normal

Primary Subtitle Language

English

Secondary Subtitle Language

English

Audio Type

Normal

Primary Audio Language

English

Secondary Audio Language

English

Press B or b to select Primary Subtitle Language or
Secondary Subtitle Language and press C or c to
select an option.

The SUBTITLE button can be used to select subtitle on or off
for the current channel only and to select the subtitle
language if more than one subtitle is available.

Audio languages

From the Quick Menu, press b to select Channel
Options and press OK.

Press c repeatedly to highlight the lock (

Press OK to select. A tick will appear in the box.

) box.

If a PIN has already been set, PIN entry will be required
to set the locked channels.

Repeat steps 1 through 4 for other channels.

Press EXIT.

Off

Subtitle Type

This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided multiple language
tracks are being broadcast.

In the Subtitle and Audio menu, press B or b to
select Audio Type and press C or c to select Normal
or For Hard of Hearing.

Press B or b to select Primary Audio Language or
Secondary Audio Language and press C or c to
select an option.
If more than one soundtrack is available, use the s
button to select between them.

From this point on, when any of the channels in the
Locked Channel list are selected, the PIN must be
entered before they can be accessed.

English

Digital settings – other settings

Skip channels

English

CONTROLS AND FEATURES

Common Interface

Software Upgrade and Licences

The Common Interface Slot, situated on the side of the television,
enables the insertion of a CAM (Conditional Access Module) and
card. These are purchased from a service provider and allow
additional subscription broadcasts to be viewed. For
information, see a service provider.

Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the
CAM. A box will appear on screen to confirm that the
CAM has been inserted.

Press MENU / C c / B / C c to highlight Setup /
System Setup icons and press OK.

Press B or b to select DTV Settings and press OK.

Press B or b to select Common Interface and press
OK.

Auto Upgrade
When Auto Upgrade is set to On, the television will
automatically upgrade while in standby if new software is
available.

In the System Setup menu, press B or b to select
Software Upgrade and press OK.

Press B or b to select Over-the-air Upgrade and
press OK.

Press B or b to select Auto Upgrade.

Use C or c to select On or Off.

Searching for New Software

Details of the CAM should now be available.

NOTE:
• Software update of a CI Plus CAM may occur automatically
if instigated by the broadcaster. This could cause the
cancellation of any Reminders/Recordings during this
process.
• Some CI or CI+ CAM may not be supported.
• CI+ operation is not guaranteed except for Canal Ready DTT
services on suffix FC models.

If preferred, software upgrades can be searched for manually
using Search for New Software.

In the System Setup menu, press B or b to select
Software Upgrade and press OK.

Press B or b to select Over-the-air Upgrade and
press OK.

Press B or b to select Search for New Software.

Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching

If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.

CONTROLS AND FEATURES

System Information and Reset TV

TOSHIBA may offer upgrades for the TV’s software in the future.
The TV’s software is upgraded via the Network.

System Information

Before downloading software:

This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.

Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.

In the System Setup menu, press B or b to select
Software Upgrade and press OK.

Press B or b to select Network Upgrade and press
OK.

a
b

In the System Setup menu, press B or b to select
System Information.
Press OK to display the System Information.
System Information
TOSHIBA
2011
2.1.26.0 Feb 19 2011 - 15:56:50 FW:13

NOTE: If the network is not available, a warning
message will appear.

WEAK

The TV software upgrade will start when download
succeeds.

Software Licences
The licences for the software used in this television are available
for viewing.

In the System Setup menu, press B or b to select
Software Licences and press OK.

AVERAGE

Ch25

c
d

A screen will appear displaying all the licensing
information required for the televisions software.

STRONG
GOOD

For information about the signal quality of a particular
multiplex, press B or b to select that multiplex.
Press OK for a screen showing detailed technical
information about the selected multiplex.

Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.

a
b

In the System Setup menu, press B or b to select
Reset TV.
Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup and
perform an auto tune. (See “Quick Setup” section on
page 22.)

English

Network Upgrade

English

CONTROLS AND FEATURES

PC Settings

Sampling Clock
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.

Horizontal and Vertical Position
Connect the PC (as shown in the “Connecting a computer”
section) and ensure that a picture is showing on the television
screen. The picture position may now be adjusted to suit
personal preference.

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select Display Settings and press OK.

In the Display Settings menu, press B or b to select
PC Settings and press OK.

Press B or b to select Sampling Clock.

Press C or c to adjust until the picture clears.

Reset
Use Reset to return all items to the original factory settings.

Press B or b to select PC Settings and press OK.
Display Settings
Auto Format

4:3 Stretch

Off

Picture Position

In the Display Settings menu, press B or b to select
PC Settings and press OK.

Press B or b to select Reset and press OK.

PC Settings

Press B or b to select an option and press C or c to
adjust the settings.
PC Settings
Horizontal Position

Vertical Position

Clock Phase

Sampling Clock

NOTE: When a PC is connected using HDMI, none of these
functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.

0
Reset

Clock Phase
The Clock Phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.

In the Display Settings menu, press B or b to select
PC Settings and press OK.

Press B or b to select Clock Phase.

Press C or c to adjust until the picture clears.

CONTROLS AND FEATURES

External input skip
This feature is designed to make input selection more convenient
by allowing you to skip unused inputs.

See page 14 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button o
until the picture from connected equipment is shown.

English

Input selection and AV
connections

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select AV Connection.
Preferences
Network Setup

Input selection

Network Device Setup
Photo Frame Setup

Use the Input Selection window if the television does not switch
over automatically.

Teletext

Panel Lock

By pressing o on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.

AV Connection

Inputs

DTV Ant (or Cable) TV *

DTV Ant (or Cable) Radio *

DTV Ant (or Cable) Text *

DTV Sat TV *

HDMI 1

DTV Sat Radio *

HDMI 2

DTV Sat Text *

HDMI 3

HDMI 4

Press OK to display the AV Connection menu.
Press B or b to highlight Input Labeling and press
OK.
AV Connection
Input Labeling
PC/HDMI 3 Audio

Side Shared Audio

EXT 2

HDMI 3 Audio

Digital

HDMI Settings

Off

Display Settings

Pressing o on the TV

Pressing o on the
remote control

Auto

Network Lock

Digital Audio Output

HDMI 1
HDMI 2
HDMI 3

HDMI 4
PC

Press B or b to select the input you want to skip, and
then press the RED button to turn on the skip.
Input Labeling

ATV

Input

* If radio or text channels
are currently available
for DTV.

EXT 1
EXT 2
EXT 3
HDMI 1

HDMI® displays equipment connected to Input HDMI
on the back or side of the television.

HDMI 2
HDMI 3
HDMI 4

PC displays a computer connected to Input RGB/PC on
the back of the television.

Label

---------

To turn off the skip, press the RED button again.
The input set to Skip is grayed out in the Input
Selection window and is skipped over when you press
o on the remote control.

English

CONTROLS AND FEATURES

Labeling video input sources

PC Audio

These input labels are shown in the input selector. You can label
video inputs according to the devices you have connected to the
TV.

In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the “Connecting
a computer” section), and then use the PC/HDMI 3 Audio
setting.

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select AV Connection and press OK.

Press B or b to select Input Labeling and press OK.

In the Preferences menu, press B or b to select AV
Connection and press OK.

Press B or b to select PC/HDMI 3 Audio and press C
or c to select the PC option.
NOTE: Selecting the PC option will force HDMI 3
Audio to Digital mode.

Input Labeling
Input
EXT 2

---

EXT 3

HDMI 1

HDMI 2

HDMI 3

The AUDIO terminals for the COMPONENT VIDEO INPUT (EXT 2)
and VIDEO INPUT (EXT 3) are shared.
Select an appropriate option (EXT 2 or EXT 3) for the input that
you are using.

HDMI 4

---

In the Preferences menu, press B or b to select AV
Connection and press OK.

Press B or b to highlight Side Shared Audio, and
then press C or c to select EXT 2 or EXT 3.

EXT 1

Label

Press B or b to highlight the item you want to label,
and then press C or c to select --, Amplifier, Cable,
DVD, Game, PC, Recorder, Satellite or VCR, or press
the GREEN button to select User Input.

Side Shared Audio

HDMI 3 Audio

NOTE: When User Input is selected by pressing the
GREEN button, the Software Keyboard window will
appear. Input the desired characters (10 characters or
less) by using the Software Keyboard (see page 55)
or using the number buttons for a number input. To
save your settings, press the BLUE button.

Repeat step 4 for other video inputs.

If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 3 (AUDIO) on the back of
the television (as shown in the”Connecting an HDMI® or DVI
device to the HDMI input” section on page 16), then use the
HDMI 3 Audio setting.

In the Preferences menu, press B or b to select AV
Connection and press OK.

Press B or b to select HDMI 3 Audio and press C or
c to select Auto or Analogue.
AV Connection
Input Labeling
PC/HDMI 3 Audio

Side Shared Audio

EXT 2

HDMI 3 Audio

Auto

HDMI Settings
Digital Audio Output

If the sound is absent, try selecting a different setting.
NOTE: HDMI 3 supports digital and analogue sound,
HDMI 1, HDMI 2 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).

CONTROLS AND FEATURES

Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Enable Content Type and
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.

a
b

AV Connection
Input Labeling
PC/HDMI 3 Audio

In the Preferences menu, press B or b to select AV
Connection and press OK.
Press B or b to select HDMI Settings and press OK.

RGB Range

Auto

Press OK to display Digital Audio Output menu and
press B or b to select an option.

PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital

On
On
Auto

• Enable Content Type: On
This feature is part of the HDMI standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent
from the connected HDMI device.
• INSTAPORT™: On
This feature reduces the lag time when switching
HDMI sources.
• RGB Range: Auto
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.

Audio Delay:
Press C or c to select Auto or Manual.
Auto:

This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment:
Press C or c to adjust the audio signal timing
(0 – 250ms) to meet the video signal timing.

NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.

NOTE:
• This feature is grayed out when Audio Delay is in
Auto.
• A time lag will occur when the video signal or audio
signal is changed. Adjust the timing accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
• Depending on the connected equipment (amplifier,
etc.), adjustment may not be possible.
• When the optical digital output setting (AutotPCM)
is changed, it may be necessary to adjust the timing
again.
• Do not use other than for audio output from the AV
amplifier, etc. (Malfunction may occur)

Digital Audio Output
When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.

HDMI 3 Audio

Audio Format:
Press C or c to select PCM or Auto.

HDMI Settings
INSTAPORT TM

EXT 2

Digital Audio Output

Press B or b to select an item and press C or c to
select a setting.
Enable Content Type

Side Shared Audio
HDMI Settings

NOTE: HDMI Settings is grayed out on non-HDMI
inputs.

Press B or b to select Digital Audio Output.

In the Preferences menu, press B or b to select AV
Connection and press OK.

English

HDMI Settings

English

CONTROLS AND FEATURES

Using Personal TV Mode

Edit Name

You can customize some TV functions as desired
and those settings can be saved in one of 4
Personal Modes (A to D). The Personal Mode can
be selected from the Quick Menu.

You can edit the name of your Personal Mode.
Press B or b to select Edit Name and press OK.
Edit the desired name by using the software keyboard (see
page 55). The maximum number of characters is 25.

Personal PIN Setup

Press QUICK to open the Quick Menu.

Press B or b to select Personal PIN Setup and press OK.
Enter your personal PIN in same manner as “Parental PIN
Setup” on page 83.

Press B or b to select Personal Mode and press OK.

Volume Type

To select the Personal Mode

Press B or b to select Volume Type and press C or c to
select Preset or Last.

Personal Mode
Normal

Last — The last volume level in your Personal Mode.

Personal Mode A

Preset — The Preset volume level is selected whenever the
Persona Mode is switched.

Personal Mode B
Personal Mode C

Preset Volume

Personal Mode D

Press Bb or corresponding coloured button to select
individual Personal Mode from Normal, Personal
Mode A, Personal Mode B, Personal Mode C and
Personal Mode D. The mode will default to Normal
every the TV is turned off and on.
NOTE: If the Personal PIN has been set, the Lock icon
will be displayed. If the Personal PIN entry screen is
displayed, enter the correct Personal PIN.

Personal TV Setup

Press MENU / C c / B / C c to highlight Setup/
Preferences icons and press OK.

Press B or b to select Personal TV Setup and press
OK.

Press B or b to select Preset Volume and press B or b to
adjust your desired volume level. When the Volume Type is
set to Last, this feature will be grayed out.

Behaviour in Personal Mode
• Personal Favourite Channel List (Fav5 -Fav8):
Normal Mode:
Fav1 / Fav2 / Fav3 / Fav4
Personal Mode A: Fav5
Personal Mode B: Fav6
Personal Mode C: Fav7
Personal Mode D: Fav8
Press the LIST button to display Channel List and press C or
c to select All or your Personal Mode (Fav5 – Fav8)
• Personal Picture Mode:
The Picture Mode you selected is stored in your Personal
Mode.
• Personal Volume:
The sound volume you set is stored in your Personal Mode.

Personal TV Setup
Personal Mode A

Personal Grouping of Recorded Programmes

Personal Mode B

When switching between Personal Modes, recordings (OTR,
TimeShift, Timer Recording) will be displayed categorically in
the Library by Personal Mode.

Personal Mode C
Personal Mode D

Press B or b (or corresponding coloured button) to
select the individual Personal Mode and press OK.

When user performs a Timer Recording while in Personal
Mode A/B/C/D, after the transition to Set Timer, make the
Default for Personal Grouping (a Set Timer setting item) be a
selection item corresponding to whatever mode you are in.

Personal TV Setup
Personal Mode A
Edit Name
Personal PIN Setup
Volume Type
Preset Volume

Programmes recorded in Personal Mode A/B/C/D with OTR or
TimeShift will be saved remembering the Personal Grouping
corresponding to each respective mode.

Preset
30

When you perform OTR, TimeShift, or Timer Recording while
in Normal Mode, the Personal Grouping for recorded
programmes will be remembered as “None.”

CONTROLS AND FEATURES

Auto Standby
When Auto Standby is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
REGZA-LINK equipment.

This is a new feature that uses CEC technology and
allows you to control Toshiba REGZA-LINK
compatible devices from the television remote
control via HDMI connection (page 17).

When the Enable REGZA-LINK item in the REGZA-LINK
Setup menu is set to On, individual functions also set to On
will be activated.

In the REGZA-LINK Setup menu, press b to highlight
Auto Standby.

Press C or c to select On or Off.

Enable REGZA-LINK

Amplifier Control

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select REGZA-LINK Setup and press
OK.

Press b to select Enable REGZA-LINK and press C or
c to select On.
REGZA-LINK Setup
Enable REGZA-LINK

TV Auto Power

Auto Standby

Amplifier Control
Initial Speaker Setting

On
TV Speakers

When Amplifier Control is set to On, it allows the “Initial
Speaker Setting” feature to become available.

In the REGZA-LINK Setup menu, press b to highlight
Amplifier Control.

Press C or c to select On or Off.

Initial Speaker Setting
This feature allows the audio output preference to be set to the
TV speakers or AV amplifier speakers. The AV Amplifier option lets
the television’s remote control adjust or mute the volume of the
audio.

In the REGZA-LINK Setup menu, press b to highlight
Initial Speaker Setting.

Press C or c to select TV Speakers or Amplifier.

Position Key Pass Through

NOTE: If you set Enable REGZA-LINK to Off, all other
items will be grayed out.

TV Auto Power

Position Key Pass Through

The TV Auto Power setting allows the television to be
automatically switched on if a REGZA-LINK device is turned on.

When Position Key Pass Through for the selected HDMI input
mode is set to On, the PU Pu and number (0-9) keys on the
remote control will pass through. When in Off, those operate as
TV programme selection keys.

a
b

In the REGZA-LINK Setup menu, press b to highlight
TV Auto Power.

In the REGZA-LINK Setup menu, press b to highlight
Position Key Pass Through and press OK.

Press B or b to select the appropriate HDMI mode.

Press C or c to select On.

Press C or c to select On or Off.

English

Using REGZA-LINK

English

CONTROLS AND FEATURES

REGZA-LINK input source selection
If a REGZA-LINK device with HDMI switching capability (e.g. AV
amplifier) is connected to the HDMI input, you can select another
REGZA-LINK device that is connected to the master HDMI device
on the input source list.

Press o and a list will appear on screen showing
available input sources.

Press b to select the desired input source with
REGZA-LINK icon.

Press c and a second selection screen will appear
showing all connected REGZA-LINK equipment.

REGZA-LINK Device Control
With the REGZA-LINK mode on your television’s remote
control, you can control the connected REGZA-LINK device
you are watching.
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection.

a
b

Press QUICK to open the Quick Menu.
Press B or b to select REGZA-LINK Device Control
and press OK.
REGAZA- LINK Device Control
Power

Recorder

Inputs
TV
1
2
3

Eject

Root Menu

DVD

VCR/DVR

Contents Menu

CBL/SAT

Setup Menu

GAME/TV

AUX

Top Menu
DVD Menu

HDMI 1

Audio

HDMI 2
HDMI 3

REGZA-LINK

Press B or b to select a control option and press OK.

HDMI 4
PC

Press B or b to select the desired input source, and
then press OK.

NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an HDMI
cable is removed, it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK in the REGZA-LINK Setup menu may
need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable REGZALINK item on the REGZA-LINK Setup menu from Off to On.

NOTE: The available functions depend on the equipment
connected. Please refer to the operation manual for each
piece of equipment connected.

REGZA-LINK one touch play
When connected equipment is switched on, REGZA-LINK will
automatically detect the television through the input
selection. If the television is in standby, it will be switched on
automatically.
These functions can be enabled or disabled from the REGZALINK Setup (see page 93).
NOTE:
• Even if the equipment is showing a menu, the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.

REGZA-LINK system standby
If the television is turned off (standby mode), the television
will send a message to turn off (standby mode) all of the
REGZA-LINK devices connected to the television.
These functions can be enabled or disabled from the REGZALINK Setup (see page 93).
NOTE: This feature depends on the connected equipment
and television state.

CONTROLS AND FEATURES

English

REGZA-LINK system audio control
With your television’s remote control, you can adjust or mute the
sound volume of the speakers connected to the television via an
AV amplifier.

a
b

Set the Initial Speaker Setting to Amplifier in the
REGZA-LINK Setup menu.
Confirm that a connected REGZA-LINK device (such as
a DVD player, etc) is selected for the AV amplifier input
source.

NOTE:
• These functions depend on the device connected.
• When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier’s speakers even if TV Speakers has been
selected. Turn the television off and on again to output the
sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.

Toshiba PC compatible with REGZA-LINK
This feature automatically adjusts the suitable widescreen
formats and picture preferences when connected to a
Toshiba PC compatible with REGZA-LINK.
NOTE: This feature depends on the connected equipment
state.

English

TEXT SERVICES

Text services

Navigating pages using Auto

This television has a multi-page text memory,
which takes a few moments to load. It offers two
Modes of viewing text – Auto will display Fastext,
if available. List will save your four favourite pages.

If Fastext is available, four coloured titles will appear at the
base of the screen.
To access one of the four given subjects, press the relevant
coloured button on the remote control.

Selecting modes

For further information on your particular text system(s), see
the broadcast text index page or consult your local Toshiba
dealer.

The text character set will be automatically chosen by the
language setting in the Setup menu.

Navigating pages using LIST

Press MENU / C c / B / C c to highlight Setup /
Preferences icons and press OK.

Press B or b to select Teletext, and then press C or
c to select Auto or List.

The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.
To change these saved pages, press the relevant coloured
button and enter the 3 digit number. This number will change
in the top left of the screen and in the coloured highlight.

Preferences

Press OK to save. Whenever OK is pressed, all four page
numbers showing at the bottom will be saved and the
previous ones will be lost.

Personal TV Setup
REGZA-LINK Setup
Network Setup

If OK is not pressed, the selection will be forgotten when the
channel is changed.

Network Device Setup
Photo Frame Setup
Teletext

Auto

Other pages may be viewed by entering the 3 digit page
number – but DO NOT press OK or these pages will be saved.

Network Lock
Panel Lock

Off

Text information
The TEXT button:
To view text services press TEXT. Press again to superimpose
the text over a normal broadcast picture and again to return
to normal viewing. Channels cannot be changed until text is
cancelled.
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3 digit page
number using the numbered buttons, pressing the coloured
buttons or pressing PU to advance to the next page and Pu
to go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as subpages are received.
If you open a page containing sub-pages, the sub-pages are
automatically displayed in sequence. To quit automatic subpage change, press C or c.
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating that
these pages have been loaded.
These sub-pages will remain available to view until another
page is chosen or, in normal TV mode, the channel is changed.

TEXT SERVICES

English

Control buttons
Below is a guide to the functions of the remote control text
buttons.

k To display the index/initial page:
Press k to access the index/initial page. The one displayed is
dependant on the broadcaster.

TEXT To display a page of text:
Press TEXT to display text. Press again to superimpose text
over a normal picture. Press again to return to normal
television viewing. Channels cannot be changed until this has
been done.

A To reveal concealed text:
To discover the solutions on quiz and joke pages press the A
button.

B To hold a wanted page:
At times it is convenient to hold a page of text. Press B and
B will appear in the top left of the screen. The page will be
held on screen until the button is pressed again.

C To enlarge the text display size:
Press C once to enlarge the top half of the page, press again
to enlarge the bottom half of the page. Press again to revert
to normal size.

D To select a page whilst viewing normal
picture:
Enter the page number then press D, normal picture
will be displayed. The television will indicate when the page is
ready by changing the colour of the page number at the top
of the screen. Press TEXT to view the page.
To display news flashes:
Select the news flash page for the chosen text service (see the
index page of text service). The news flashes will be displayed
as and when they are broadcast.

Remember to cancel text before
changing channels - press the TEXT
button twice.

English

PROBLEM SOLVING

Questions and Answers

Q
A

Below are the answers to some of the most
common queries.

Q
A
Q
A

Why is there no sound or picture?

Check the television is not in standby mode. Check
the mains plug and all mains connections.

b
There is a picture, but why is there little or no
colour?

Colour System

Q
A
Q
A
Q
A
Q
A
Q
A
Q
A

English
Germany
Auto

With C or c choose between Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.

Q
A

Why doesn’t the video/DVD being played show
on screen?

Q
A

Using B or b adjust to get the best picture and
sound. Press OK and then EXIT.

System Setup
Country

Select the ATV Manual Tuning menu. Highlight the
station and press OK. Then press c to select Manual
Fine Tuning.

Manual Fine Tuning

With the external source playing, select Colour
System from the System Setup menu.

Menu Language

Interference or a weak signal. Try a different
television station. Manual Fine Tuning may help.

ATV Manual Tuning

When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to Auto to automatically display
the best colour system.

To check that you have the best colour:

What else can cause a poor picture?

Make sure the media recorder or DVD player is
connected to the television as shown on page 14,
and then select the correct input by pressing o.

Why is there a picture but no sound?
Check all lead connections.
No sound or unacceptable format sound may be
received.
Check the volume has not been turned down or that
sound mute has not been selected.
Check shared audio settings.

Why don’t the controls of the television work?
Check that Panel Lock is not On.

Why doesn’t the remote control work?
Check that the batteries aren’t dead or inserted
incorrectly.

Why is the digital channel locked?
The channel has been locked in Channel Options
(see “Digital settings – Channel Options” section).

Why are some of the digital subscription channels
unavailable?
Your subscription needs upgrading. Contact your
service provider.

Why is the soundtrack in English when a different
audio language has been selected?
The programme is currently being broadcast with an
English soundtrack only.

Why is there incorrect or no sound when in DTV
mode?
Press s to ensure the hard of hearing option has
not been selected.

PROBLEM SOLVING

What is DVB-T?

Q
A

Why are there vertical stripes on the screen when
in PC mode?

Q
A

Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?

Q
A
Q
A

Why when digital subtitles have been selected are
they not showing on screen?

Q
A
Q
A

Digital Video Broadcast via an aerial/antenna.

What is DVB-C?
Digital Video Broadcast via a cable connection.

How are radio channels selected?
Press TV on the remote control and select DTV
Radio. Alternatively select from the GUIDE.

Why is a page number visible at the top of the
screen but no text?
Text has been selected but Teletext information is
currently unavailable on the current source.

Why are the colours wrong when an NTSC source
is played?
Connect the source via a SCART lead and play.
Select Colour System from the System Setup menu.

Set the Colour to Auto and exit.

Go to the Picture menu and adjust the tint.

Q
A

What can be done if the PIN number has been
forgotten?
Use the Master PIN code of 1276, then change to a
number of your choice. Select Parental PIN Setup
from the DTV Settings menu to enter PIN. Ensure
that no-one else can use the Master PIN by removing
the Owner’s Manual.

Why don’t the devices connected via HDMI
operate properly?
Make sure to use cables with the HDMI logo
(see page 16).
Some early HDMI equipment may not work properly
with the latest HDMI TV products, due to new
standard adoption. Try switching the HDMI settings
(Enable Content Type and INSTAPORT™) to Off.

The Sampling Clock may need adjustment. Select PC
Settings from the Display Settings menu, highlight
Sampling Clock and adjust until the lines clear.

The Clock Phase may need adjustment. Select PC
Settings from the Display Settings menu, highlight
Clock Phase and adjust until the picture clears.

Subtitles are not currently being transmitted by the
broadcaster.

Why are there problems with analogue text?
Good performance of text depends on a good strong
broadcast signal. This normally requires a roof or loft
aerial. If the text is unreadable or garbled, check the
aerial. Go to the main index page of the text service
and look for the User Guide. This will explain the basic
operation of text in some detail. If further information
is needed on how to use text see the text section.

Q
A

Why don’t the REGZA-LINK devices work?

Q
A
Q
A

Why is the REGZA-LINK logo still showing when
the equipment has been disconnected?

Q
A

Why doesn’t the Media Player feature operate?

When the connected REGZA-LINK device does not
work correctly after you have changed the settings of
the device, turn off your television and unplug the
power cord, and then plug and turn on again.
Unplug the HDMI cable of the REGZA-LINK device
and lead again.

If the REGZA-LINK device is disconnected, the logo
will disappear after approximately one minute.

Why don’t the networked devices work?
The LAN cables are not connected properly or at all.
Connect all cables (see page 19).
Make sure your network address is set up correctly
(see page 53).

Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.

English

Q
A
Q
A
Q
A
Q
A

English

PROBLEM SOLVING

Q
A

Toshiba Zl1 55 Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation