TowGo 1 Trailer Backup Navigation Aid User Manual UserGuide

Download:
Mirror Download [FCC.gov]
Document ID	3764740
Application ID	SoTsynJvS+O8BWa2aejYNQ==
Document Description	User manual_Installation Guide_Rev 1.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	187.38kB (2342191 bits)
Date Submitted	2018-02-28 00:00:00
Date Available	2018-02-28 00:00:00
Creation Date	2018-02-26 19:03:08
Producing Software	Mac OS X 10.10.5 Quartz PDFContext
Document Lastmod	2018-02-26 19:03:08
Document Title	Microsoft Word - UserGuide.doc
Document Creator	Word

The TowGo ® Trailer Backup Navigation Aid
INSTALLATION GUIDE
®
i!
! ii!
TABLE OF CONTENTS
1.
THANK YOU! ..............................................................................................1
2.
ABOUT YOUR TRAILER HITCH SENSOR...................................................1
3.
ABOUT YOUR STEERING WHEEL SENSOR ..............................................2
4.
BEFORE YOU GET STARTED.....................................................................2
5.
GETTING STARTED....................................................................................3
i!
!
STEERING!WHEEL!SENSOR:!!
TRAILER!HITCH!SENSOR:! !
RADIO&ID’s!
FCC!ID:!!!2AOGL1!
FCC!ID:!!!2AOGL2!
USA!
!“This! device! complies! with! Part! 15! of! the! FCC! Rules.! ! Operation! is! subject! to! the! following!
two!conditions:!(1)!this!device!may!not!cause!harmful!interference,!and!(2)!this!device!must!
accept! any! interference! received,! including! interference! that! may! cause! undesired!
operation.”!
“Changes! or! modifications! not! expressly! approved! by! TowGo,! LLC! could! void! the! user’s!
authority!to!operate!the!equipment.”!
“This! equipment! has! been! tested! and! found! to! comply! with! the! limits! for! a! Class! B! digital!
device,!pursuant!to!Part!15!of!the!FCC!Rules.!!These!limits!are!designed!to!provide!reasonable!
protection! against! harmful! interference! in! a! residential! installation.! This! equipment!
generates,! uses! and! can! radiate! radio! frequency! energy! and,! if! not! installed! and! used! in!
accordance!with!the!instructions,!may!cause!harmful!interference!to!radio!communications.!!
However,!there!is!no!guarantee!that!interference!will!not!occur!in!a!particular!installation.!!If!
this!equipment!does!cause!harmful!interference!to!radio!or!television!reception,!which!can!be!
determined!by!turning!the!equipment!off!and!on,!the!user!is!encouraged!to!try!to!correct!the!
interference!by!one!of!the!following!measures:!
NN! Reorient!or!relocate!the!receiving!antenna.!
NN! Increase!the!separation!between!the!equipment!and!receiver.!
NN! Connect!the!equipment!into!an!outlet!on!a!circuit!different!from!that!to!which!
the!receiver!is!connected.!
NN! Consult!the!dealer!or!an!experienced!radio/TV!technician!for!help.”!
“This! equipment! has! been! tested! and! found! to! comply! with! the! limits! for! a! Class! A! digital!
device,!pursuant!to!Part!15!of!the!FCC!Rules.!!These!limits!are!designed!to!provide!reasonable!
protection! against! harmful! interference! when! the! equipment! is! operated! in! a! commercial!
environment.!!This!equipment!generates,!uses!and!can!radiate!radio!frequency!energy!and,!if!
not! installed! and! used! in! accordance! with! the! instruction! manual,! may! cause! harmful!
interference!to!radio!communications.!!Operation!of!this!equipment!in!a!residential!area!is!
likely! to! cause! harmful! interference! in! which! case! the! user! will! be! required! to! correct! the!
interference!at!his!own!expense.”!!
This!device!complies!with!FCC!and!IC!radiation!exposure!limits!set!forth!for!general!
population!(uncontrolled!exposure).!This!device!must!not!be!collocated!or!operating!in!
conjunction!with!any!other!antenna!or!transmitter.&
Canada!
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.!
! ii!
THANK YOU FOR YOUR PURCHASE!
Thank you for purchasing the TowGo® Trailer Backup Navigation Aid. We are very
happy to have you as one of our customers and we hope that our product will
provide you with years of enjoyment. This installation manual will help you become
familiar with the Steering Wheel Sensor and the Trailer Hitch Sensor that came with
your product. After installation, please refer to your Operator’s Manual.
ABOUT YOUR TRAILER HITCH SENSOR
Main Housing
Swing Arm
LED Status Indicator (rear side)
Stretch Cord Attachment Clip
Flat-four Cable
Flat-four Cable Plug
! 1!
ABOUT YOUR STEERING WHEEL SENSOR
Steering Wheel Attachment Straps
LED Status Indicator
Power/Initialize Button
Strap Engagement Hooks (rear side)
USB Battery Charging Port (inner top side)
Cosmetic Skirt
BEFORE YOU GET STARTED
Charge your Steering Wheel Sensor:
Locate the USB charging cable that came with your purchase (or one of your own).
On the inner top side of your Steer Sensor, you will see a USB charging input port.
Plug the mini-USB end of the cord into the charging port; plug the other end into a
powered USB plug. (Note: the supplied USB cord can only be used for charging.)
Allow at least two (2) hours for charging.
! 2!
GETTING STARTED
Attach the Trailer Hitch Sensor to your trailer (see APPENDIX A). Connect the flatfour cable to your vehicle’s trailer wiring port or trailer wiring harness. If necessary,
a flat-four wiring adapter (such as a 2-Way 4-Pin Y-Splitter having one male and two
female connectors) can be purchased where auto parts are sold. Turn on the lights of
the vehicle to power up the Trailer Hitch Sensor.
Attach the Steering Wheel Sensor to your vehicle’s steering wheel. Hold the sensor
against the inside curve of the steering wheel with the LED Status Indicator facing
you. Wrap the two Attachment Straps to the backside of the steering wheel and
hook them onto the Strap Engagement Hooks. Power-up the Steering Wheel Sensor
by briefly pressing the Power/Initialize Button on the bottom surface of the Sensor.
Load the TowGo App onto your Android™ cell phone or tablet. Launch the App and,
when it finishes starting up, you will see a colorful screen with two dark red corners:
Great work! You are now ready to start learning how to operate your TowGo Trailer
Backup Navigation Aid. Please refer to your Operator’s Manual for the specifics of
operation.
! 3!
! ii!
APPENDIX A!
DETERMINE!U*BOLT!SIZES!
The!TowGo®!Trailer!Backup!Navigation!Aid!requires!three!U
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 16
PDF Version                     : 1.4
Title                           : Microsoft Word - UserGuide.doc
Producer                        : Mac OS X 10.10.5 Quartz PDFContext
Creator                         : Word
Create Date                     : 2018:02:26 19:03:08Z
Modify Date                     : 2018:02:26 19:03:08Z

EXIF Metadata provided by EXIF.tools