| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 458675 |
| Application ID | 3Yi1rftaMax/Xm0MnDvp4g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.18kB (152212 bits) |
| Date Submitted | 2004-08-11 00:00:00 |
| Date Available | 2004-08-11 00:00:00 |
| Creation Date | 2004-07-27 19:27:52 |
| Document Lastmod | 2004-07-27 19:54:38 |
| Document Title | User Manual |
| Document Creator | HP 9100C Digital Sender |
| Document Author: | ITS ELECTRIC TOY |
characters WIII De cnangea Subject to me Item name an the WII'ICIOW oox
l RADlO (ONVROLLEE
1) Open battery compartment on the underslde of the radio controller and insert one 9 Volt battery and close cover.
2) Open battery compartment on the underside of skateboard and insert 4 AAA batteries and close cover.
3) Turn power switch ON the side of radio controller. Red LED light when lit indicates power is ON.
4) Turn power switch ON on the underside of skateboard.
5) Attach magnetic figure to me center of board. Position figure further forward or backward to perform additional tricks.
®h Whee'e Erin
6 Br 7) Turn wheel to the left or right to turn skateboard left or right.
8 Br 9) Move trigger on the underside of radio controller down or up to control forward or backward motion.
Tail sammng Funtlon
10) Move trigger down and then up quickly to perform "WHEELIES" tricks.
11) Turn wheel left or right and hold position while moving the trigger down or up to
perform tall spinning function.
WARNING:
Changes or modificaiions to this unit not expressly approved by the
party responsible for compllance could void the user's authority to
operate the equipment.
Note:
This equipment has been tested and round to comply with the limits for
a class B digital device, pursuant to Part 15 at the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, I1 not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
However, there Is no guarantee that Interference will not occur in
particular Installation. If this equipment does cause harrrllul interference
to radio or television receptlan, which can be determined by (urnlng the
equipment off and on, the user Is encouraged to try to correct the
lnterlerence by one or more of the tallowlng measures:
~ Recrlant or relocate the receiving antenna
- increase the separation between the equipment and receiver
' Connect the equipment Into In outlet on u oircult different
from that to which the receiver is needed
' Consult the dealer or an experlencad radio/TV technician for help
This device complies with Part 15 01 the FCC Rules,
Operation Is suhlsci to the tollowlng two conditions:
1) this device may not cause harmful interlerence, and
2) this device must accept any interference received,
Including inter'erence that may cause undesired operation.
Position bottom of foot as
section shown on board for
optimum function 3-
performance.
20 FOOT
RAN G E !
- Do not use rechargeable batteries.
- Non
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Creator : HP 9100C Digital Sender
Create Date : 2004:07:27 19:27:52
Author : ITS ELECTRIC TOY
Producer :
Title :
Subject : manual
Modify Date : 2004:07:27 19:54:38+08:00
Page Count : 1
EXIF Metadata provided by EXIF.tools