Toy State 36665F27 HEAVY DUTY 27MHz TX User Manual 38721 CAT Instr 090204

Toy State International Ltd. HEAVY DUTY 27MHz TX 38721 CAT Instr 090204

USERS MANUAL

RADIO CONTROL
OWNER’S MANUAL
BATTERY REQUIREMENTS:
3 “AAA” Batteries (for Controller)
8 “AA” Batteries (for Machine)
PROBLEM! CAT®MACHINE RUNS SLOWLY
• There is radio interference in the area.
• Another R/C vehicle with the same frequency is close by.
• The antenna of controller is not screwed in tight.
• The antenna is not fully extended.
• Are the batteries weak or out of power?
PROBLEM? PERFORMANCE DROP, INCONSISTENT MOVEMENT OR FAILS TO RUN
Check and replace batteries, if necessary, in CAT Machine and controller with new alkaline
batteries.
Call 1-877-473-8015 for help!
MADE IN SHENZHEN, CHINA
TOY STATE INTERNATIONAL LIMITED
1 PEKING ROAD, KOWLOON, HONG KONG
IN THE INTEREST OF BETTER QUALITY AND VALUE, WE ARE CONSTANTLY
IMPROVING AND UPDATING OUR PRODUCTS. CONSEQUENTLY, PICTURES IN THIS
INSTRUCTION SHEET MAY SOMETIMES DIFFER FROM THE MODEL ENCLOSED.
For questions, e-mail our Consumer Service Dept. at
consumerservice@toystate.com
Or Call 1-877-473-8015
Have Fun - Play Games @ www.toystate.com
HEAVY DUTY R/C
Call for Help!
If you have questions about this toy
Call Toll-Free: 1-877-473-8015
Between 9:00 a.m. – 5:00 p.m. E.S.T. Monday thru Friday
Contact via e-mail: consumerservice@toystate.com
www.toystate.com
© 2011 Caterpillar
CAT, CATERPILLAR, their respective logos,
EQUIPPED TO PLAY, and "Caterpillar Yellow" and the
“Power Edge” trade dress as well as corporate and
product identity used herein, are trademarks of
Caterpillar and may not be used without permission.
www.cat.com
Toy State, a licensee of Caterpillar Inc.
61
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE
“Modifications not authorized by the manufacturer may void users authority to operate the device.”
CAUTION
Important Battery Information
•Dispose of batteries properly.
•Do not dispose of batteries in fire.
•Use only batteries of the type recommended.
•Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
•Do not mix old and new batteries.
•Remove batteries from CAT®Machine and controller if vehicle will not be used for a long period.
PROBLEM! CAT®MACHINE DOES NOT MOVE
PROBLEM! CAT®MACHINE MOVES BY ITSELF
TROUBLESHOOTING AND CARE FOR R/C TRUCKS
• Are the + and –‘s contacts correctly matched in the controller?
• Are the metal contact tabs touching, rusty or dirty in controller?
• Are there batteries in the vehicle and controller?
• Is the power switch turned on?
• Are the batteries weak or out of power?
• There is radio interference in the area.
• Another R/C vehicle with the same frequency is close by.
• The antenna of controller is not screwed in tight.
• The antenna is not fully extended.
ATTENTION PARENTS
This Toy and all Accessories need to be periodically examined for potential hazards and that any
potentially hazardous parts be repaired or replaced.
MANUFACTURERS NOTE TIPS & TRICKS
STRONG BATTERY MEANS OPTIMUM
PERFORMANCE
Save the battery by turning off vehicle when not in use.
LIMITED RADIO CONTROL RANGE
While CAT®Machine may be visible at a distance,
full operational control may be lost. Hold controller
high in the air and direct truck back.
INTERFERENCE
Other radio signals may cause loss of control.
Remove vehicle from an area of interference.
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1). This device may not cause harmful interference.
2). This device must accept any interference received including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Note: this equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Limits are designed
to provide reasonable protection against harmful interference in a residential installation. This generates, uses and
can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on , the user is encouraged to try and correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
25
TREAT YOUR CAT®MACHINE WELL
Radio waves control and drive the CAT®Machine. Care for your CAT Machine and it will provide hours of
fun! Avoid water, heat, sand and high impact crashes! Off road vehicles may run on grassy dry areas.
Store in safe place.No direct sunlight.No rain or water.
teprac no kcuts teg yam enihcaMTAC.snoisilloC oN.tsud ro dnas oN
or grass.
CLEANING AND MAINTAINING
Brush areas where dirt and dust
get trapped.
Wipe body off with a soft rag or
tact cloth.
Do not clean vehicle with
chemicals or water.
GETTING STARTED
BATTERY AND ANTENNA INSTALLATION IN CONTROLLER
2. For best
performance,
replace 3 “AA
batteries with
3 new “AAA”
batteries. Be
sure the + and
are properly
matched.
1. To remove battery cover, loosen
screw to open.
NOTE:
For best performance, always use alkaline batteries only.
BATTERY INSTALLATION IN ROAD RIPPERS R/C VEHICLE
TO REPLACE THE BATTERIES
2. Insert 4 “AA”
batteries into
the Vehicle. Be
sure the + and
– are properly
matched.
1. To remove battery cover, loosen
screw to open.
Remove the Road Rippers R/C vehicle and controller from the box. For best performance, replace the
3 “AAA” batteries in the controller with 3 new “AAA” batteries. Add 8 “AA” batteries into the
R/C vehicle to begin full function play (see “Battery Installation” section for further details).
TO REPLACE THE BATTERIES IN THE MACHINE
8 "AA" BATTERIES REQUIRED (NOT INCLUDED)
LOOSEN
SCREW
TO OPEN
3
OPERATING CAT®MACHINE
Turn ON/OFF switch
(on bottom of CAT
Machine) to the ON
position (as shown.)
Forward, Neutral and
Reverse
Dump Bed Up
Dump Bed Down
Left and Right
Steering
Music and Lights
Music and Lights
After play, always turn vehicle off. Remove batteries from controller and CAT Machine when not in
use or when storing. Leakage may occur and cause damage if left for a long period of time.
• Install batteries in CAT®Machine and controller.
• Learn function of controller.
• Enjoy!
QUICK START GUIDE
4
!noitcA esreveR!noitcA drawroF
Tur tekcuB redaoL/deB pmuD rewoL ro esiaRthgiR ro tfeL sn
Activate Sound Effects
CAT®MACHINE FEATURES

Navigation menu