Toyota 2011 Highlander Owners Manual

2015-09-07

: Toyota Toyota-2011-Highlander-Owners-Manual-763094 toyota-2011-highlander-owners-manual-763094 toyota pdf

Open the PDF directly: View PDF .
Page Count: 615

Download
Open PDF In Browser	View PDF

Abbreviation list

Abbreviation/Acronym list
ABBREVIATIONS
2WD

2 Wheel Drive

4WD

4 Wheel Drive

A/C

Air Conditioning

ABS

Anti-lock Brake System

ACC

Accessory

ALR

Automatic Locking Retractor

CRS

Child Restraint System

DAC

Downhill Assist Control

DISP

Display

ECU

Electronic Control Unit

EDR

Event Data Recorder

ELR

Emergency Locking Retractor

EPS

Electric Power Steering

GAWR

Gross Axle Weight Rating

GVWR

Gross Vehicle Weight Rating

I/M
LATCH

602

MEANING

Emission Inspection and Maintenance
Lower Anchors and Tethers for Children

LED

Light Emitting Diode

MMT

Methylcy clopentadienyl Manganese Tricarbonyl

MTBE

Methyl Tertiary Butyl Ether

OBD

On Board Diagnostics

SRS

Supplemental Restraint System

TIN

Tire Identification Number

TPMS

Tire Pressure Warning System

TRAC

Traction Control

VIN

Vehicle Identification Number

VSC

Vehicle Stability Control

For your information
Main Owner’s Manual
Please note that this manual covers all models and all equipment, including
options. Therefore, you may find some explanations for equipment not
installed on your vehicle.
All specifications provided in this manual are current at the time of printing.
However, because of the Toyota policy of continual product improvement, we
reserve the right to make changes at any time without notice.
Depending on specifications, the vehicle shown in the illustrations may differ
from your vehicle in terms of equipment.

Noise from under vehicle after turning off the engine
Approximately five hours after the engine is turned off, you may hear sound
coming from under the vehicle for several minutes. This is the sound of a fuel
evaporation leakage check and, it does not indicate a malfunction.

Accessories, spare parts and modification of your Toyota
A wide variety of non-genuine spare parts and accessories for Toyota
vehicles are currently available on the market. You should know that these
parts are not covered by Toyota warranty and that Toyota is not responsible
for their performance, repair, or replacement, or for any damage they may
cause to, or adverse effect they may have on, your Toyota vehicle.
This vehicle should not be modified with non-genuine Toyota products.
Modification with non-genuine Toyota products may affect performance,
safety or durability, and may even violate governmental regulations. In
addition, damage or performance problems resulting from the modification
may not be covered under warranty.

Installation of a mobile two-way radio system
As the installation of a mobile two-way radio system in your vehicle may
affect electronic systems such as the multi-port fuel injection system/sequential multi-port fuel injection system, cruise control system, anti-lock brake
system, SRS airbag system or seat belt pretensioner system, be sure to
check with your Toyota dealer for precautionary measures or special instructions regarding installation.

Scrapping of your Toyota
The SRS airbag and seat belt pretensioner devices in your Toyota contain
explosive chemicals. If the vehicle is scrapped with the airbags and seat belt
pretensioners left as they are, this may cause an accident such as fire. Be
sure to have the systems of the SRS airbag and seat belt pretensioner
removed and disposed of by a qualified service shop or by your Toyota
dealer before you scrap your vehicle.

Perchlorate Material
Special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Your vehicle has components that may contain perchlorate. These components may include airbag, seat belt pretensioners, and wireless remote control batteries.

CAUTION
■ General precautions while driving
Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to operate your vehicle. Alcohol and certain drugs delay reaction time, impair judgment and
reduce coordination, which could lead to an accident that could result in
death or serious injury.
Defensive driving: Always drive defensively. Anticipate mistakes that other
drivers or pedestrians might make and be ready to avoid accidents.
Driver distraction: Always give your full attention to driving. Anything that distracts the driver, such as adjusting controls, talking on a cellular phone or
reading can result in a collision with resulting death or serious injury to you,
your occupants or others.
■ General precaution regarding children’s safety
Never leave children unattended in the vehicle, and never allow children to
have or use the key.
Children may be able to start the vehicle or shift the vehicle into neutral.
There is also a danger that children may injure themselves by playing with
the windows, the moon roof, or other features of the vehicle. In addition, heat
build-up or extremely cold temperatures inside the vehicle can be fatal to
children.

Symbols used throughout this manual
Cautions & Notices
CAUTION
This is a warning against anything which may cause death or injury to people if
the warning is ignored. You are informed about what you must or must not do
in order to reduce the risk of injury to yourself and others.

NOTICE
This is a warning against anything which may cause damage to the vehicle or
its equipment if the warning is ignored. You are informed about what you must
or must not do in order to avoid or reduce the risk of damage to your Toyota
and its equipment.

Symbols used in illustrations
Safety symbol
The symbol of a circle with a slash through it means “Do not”, “Do
not do this”, or “Do not let this happen”.

Arrows indicating operations
Indicates the action (pushing, turning,
etc.) used to operate switches and other
devices.
Indicates the outcome of an operation
(e.g. a lid opens).

TABLE OF CONTENTS

Before driving

Adjusting and operating features such as door locks,
mirrors, and steering column.

When driving

Driving, stopping and safe-driving information.

Interior
features

Air conditioning and audio systems, as well as other
interior features for a comfortable driving experience.

Maintenance
and care

Cleaning and protecting your vehicle, performing do-ityourself maintenance, and maintenance information.

When trouble
arises

What to do if the vehicle needs to be towed, gets a flat
tire, or is involved in an accident.

Vehicle
specifications

Detailed vehicle information.

For owners

Reporting safety defects for U.S. owners and seat belt
and SRS airbag instructions for Canadian owners

Index

Alphabetical listing of information contained in this
manual.

HIGHLANDER
CUSTOMER EXPERIENCE CENTER

2 0 1 1

1-800-331-4331

QUICK REFERENCE
GUIDE

10%

Printed in U.S.A. 8/10
10-TCS-03977

Cert no. SGSNA-COC-005612

00505-QRG11-HIG

122626M2.qxd:122626M2

8/20/10

11:01 AM

Page 56

122626M2.qxd:122626M2

2011
Highlander

11:02 AM

Page 29

IND
OVE
Seat

belts-Shoulder belt anchor
Push up, or squeeze
lock release to lower

The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
ure
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales,
U.S.A., Inc. wish you many years of satisfied driving in your
new Highlander.

Doors-Child
FEAT
Rear door

OVERVIEW

This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.

safety locks

Moving the lever to “LOCK” will allow the door to be opened only from
the outside.

n
mes.

Socket
adapter

Jack handle

Towing eyelet
Jack

Wrench Jack handle

This Quick Reference Guide is not a full description of
Highlander operations. Every Highlander owner should review
the Owner’s Manual that accompanies this vehicle.

FEATURES/OPERATIONS

Spare tire & tools

Tool location

! A word about safe vehicle operations

8/20/10

Spare tire

Removing the spare tire
(1)

(2)

(3)

SAFE
(1)
Remove the cover under the center deck board to find the spare tire
EMEclamp bolt.
(2) Assemble the jack handle.
(3) Put the socket adapter on the spare tire clamp bolt. Loosen the bolt
1
Visiby turning it counterclockwise with the jack handle.
2

Prog

Refer
mor to the Owner’s Manual for tire changing and jack positioning
3
procedures.
Hom
29

SAFETY AND EMERGENCY FEATURES

Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe for
operating instructions to help you avoid injury or equipment
malfunction.
e
All information in this Quick Reference Guide is current at
the time of printing. Toyota reserves the right to make
n
changes at any time without notice.

INDEX
OVERVIEW

1
2

29
28
29
29
28

Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and
more information.

HomeLink® is a registered trademark of Johnson Controls, Inc.

SAFETY AND EMERGENCY FEATURES

EMERGENCY FEATURES

Doors-Child safety locks
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Tire Pressure Monitoring (warning) System

Air Conditioning/Heating
20-22
Audio
24-25
Auto lock functions1
11
Automatic Transmission
10
Bluetooth® audio
25
Clock
22
Cruise control
23
Cup holders
27
Door locks
10
Door-Power back
12
Downhill Assist Control system (DAC)
26
Garage door opener (HomeLink®)3
23
Hill-start Assist Control (HAC)
27
Lights1 & turn signals
16
Moonroof
12
Multi-information display2
18
Parking brake
11
Power outlets-12V DC
17
Power outlets-120V AC
17
Seat adjustments-Front
13
Seat adjustments-Rear
13
Seat heaters
22
Seats-Folding down second row seats
15
Seats-Head restraints
14
Seats-Removing Center-Stow second row 14
seat
Seats-Returning third row seats
15
Seats-Stowing third row seats
14
Steering lock release
11
Steering wheel controls
26
Telephone controls (Bluetooth®)
19
Tilt and telescopic steering wheel
12
Windows-Power
18
Windshield wipers & washers
15

FEATURES/OPERATIONS

SAFETY AND

9
8
8
4-5
4
2-3
6
9
7

OVERVIEW

FEATURES/OPERATIONS

Engine maintenance
Fuel tank door release and cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry1
Light control-Instrument panel
Smart Key system1,2

OVERVIEW
Instrument panel

Steering wheel
controls (if equipped)

Automatic Air Conditioning

Steering wheel audio controls1
Steering wheel climate controls1
Multi-information display button1
Voice command button1,2
Telephone controls1,2
Headlight and turn signal controls/Headlight, turn signal and front fog
light controls1
Wiper and washer controls
Multi-information display1
Audio system or navigation system-integrated audio system1,2
Theft deterrent system/Engine immobilizer indicator1
Emergency flasher button
“AIR BAG ON” and “AIR BAG OFF” indicator and front passenger seat
belt reminder lights
Power back door main switch1
“ENGINE START STOP” button (Smart Key)1
Tire Pressure Monitoring (warning) System
2

Manual Air Conditioning

OVERVIEW

Vehicles without
navigation system

Vehicles with
navigation system

FEATURES/OPERATIONS

1
2

If equipped
For vehicles with a navigation system, refer to the “Navigation System
Owner’s Manual.”
3

SAFETY AND EMERGENCY FEATURES

Cruise control
Ignition (standard key)1
Tilt and telescopic steering lock release
Fuel filler door opener
Power back door button1
Instrument panel light control
Enhanced VSC/TRAC OFF switch
Windshield wiper de-icer switch1
Power outside rearview mirror controls
Outside rearview mirror1/Rear window defogger button
Air Conditioning controls

OVERVIEW

Instrument cluster

Tachometer
Engine coolant temperature
Service indicator and reminder
Fuel gauge
Speedometer
Odometer/trip meter switch and trip meter resetting button
Automatic Transmission shift position indicator
Odometer and two trip meters

Indicator symbols

For details, refer to “Indicators and warning lights,” Section 2-2, 2011
Owner’s Manual.
Brake system warning1

Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Charging system warning1

Front passenger occupant classification or front passenger airbag
ON/OFF indicator

Low engine oil pressure warning1

Malfunction/Check Engine indicator1
1

If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.

Engine oil replacement reminder1
OVERVIEW

Low fuel level warning
Open door warning

Airbag SRS warning1
Master warning

Automatic Transmission fluid temperature warning1
Low Tire Pressure Warning1

Electric power steering system warning1

Low windshield washer fluid level warning1

Theft deterrent/Engine immobilizer system indicator
Turn signal indicator

Front fog light indicator

Slip indicator/Hill-start Assist Control indicator/Downhill Assist
Control indicator1

FEATURES/OPERATIONS

Headlight low/high beam indicator

Vehicle Stability Control OFF indicator1

SNOW indicator

Cruise control indicator2

Downhill Assist Control indicator1
Traction control OFF indicator1

If this light flashes, refer to “Cruise control,” Section 2-4, 2011 Owner’s Manual.

SAFETY AND EMERGENCY FEATURES

Anti-lock Brake System warning1

OVERVIEW

Keyless entry

Locking operation

Without Smart Key system

With power back door

With Smart Key system

Without power back door

Unlocking operation

Without Smart Key system

With power back door

Push
With Smart Key system

Without power back door

Push ONCE: Driver door
TWICE: All doors

NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.

Glass hatch operation
(if equipped)

With power
back door

Panic button

Power back door operation
(if equipped)

Without Smart Key
system

Without power
back door

Push and hold

With Smart Key
system

Push and hold

Smart Key system (if equipped)

Start function

Depress
brake pedal

Carrying

OVERVIEW

Green indicator ON

Push

NOTE: Gear shift lever must be in Park and brake pedal depressed.

Power (without starting engine)

Without depressing the brake pedal, pressing the “ENGINE START STOP”
switch will change the operation mode in succession from:

ACC

OFF

Power ON; the engine not running.
All systems OFF.

Locking operation

Front door lock

Unlocking operation

Front door unlock*

Push
Carry remote to lock

Glass hatch unlock

Grasp
Carry remote to unlock

Back door lock/unlock

Carry remote to unlock

Unlock

Push
Push

Carry remote to lock/unlock

* Driver door unlocking function can be programmed to unlock driver door
only, or all doors. Grasping passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
7

SAFETY AND EMERGENCY FEATURES

Lock

Push

FEATURES/OPERATIONS

Accessories such as the radio will operate.

OVERVIEW

Fuel tank door release and cap
Turn to open

Pull

Store

NOTE: Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “
”
indicator may illuminate.

Hood release

Pull

Pull up latch and
raise hood

Engage support rod

Engine maintenance
OVERVIEW

NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance.
Please refer to the “Warranty Maintenance Guide.”

FEATURES/OPERATIONS

Windshield washer fluid tank
Engine oil filler cap
Engine oil level dipstick
Engine coolant reservoir

Light control-Instrument panel

+
SAFETY AND EMERGENCY FEATURES

Brightness
control

FEATURES/OPERATIONS
Automatic Transmission

Park*

“D”

Reverse
Neutral

Drive

“S” mode

“S”

* The “ENGINE START STOP”/ignition switch must be “ON” and the brake
pedal depressed to shift from Park.

“S” (Sequential) mode

Shift the shift lever to “S” position from “D” position.

+: Upshift (push and release)
-: Downshift (pull and release)

Downshifting increases power going uphill, or provides engine braking
downhill. For best fuel economy during normal driving conditions, always
drive with the shift lever in the “D” position.

Snow mode

Push

The snow mode prevents sudden acceleration on slippery surfaces. Use in
snowy or icy road conditions.

Door locks

Unlock

Lock

Auto lock functions

OVERVIEW

Automatic door locks can be programmed to operate in two different
modes, or turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed goes above approximately 12 mph.
-Doors unlock when shifting into Park.
Vehicles without Smart Key system
-Doors unlock when the ignition switch is set from “ON” to “ACC” or
“LOCK” and driver’s door is opened.

Vehicles with Smart Key system
-Doors unlock when the “ENGINE START STOP” switch is set to OFF and
driver’s door is opened.
Refer to the Owner’s Manual for more details.

Steering lock release

Smart Key system

Without Smart Key system

Turn

Push

FEATURES/OPERATIONS

Turn

Parking brake

SAFETY AND EMERGENCY FEATURES

Set: Depress
Release: Depress again

FEATURES/OPERATIONS

Tilt and telescopic steering wheel
Angle

Length

Lock release lever

Hold wheel, push lever down, set angle and length, and return lever.

NOTE: Do not attempt to adjust while the vehicle is in motion.

Moonroof (if equipped)

Sliding operation

Tilting operation

Push once to open partway;
again to open completely.

Tilt

Open

Recommended open position to
minimize wind noise.

Door-Power back (if equipped)

Instrument panel

Push and hold

Open: Push and hold
Close: Push and hold again

Back door (close only)

Push

NOTE: If battery is disconnected, the power back door needs to be
reinitialized. Refer to the Owner’s Manual for more details.
12

Seat adjustments-Front

Manual seat

Power seat
OVERVIEW

Seat position (forward/backward)
Seat cushion angle
Height crank (driver side only)
Seatback angle
Seat position, cushion angle (driver side only) and height (driver side
only)
Driver seat leg support (if equipped)
Lumbar support (driver side only)
FEATURES/OPERATIONS

Seat adjustments-Rear

Second row seat

Refer to the Owner’s Manual for more details.

SAFETY AND EMERGENCY FEATURES

Seat position (forward/backward)
Seatback angle
Third seat access lever
Seatback release

FEATURES/OPERATIONS

Seats-Head restraints
Front

Rear

Angle (if equipped)

Height

Lock release button

Seats-Removing Center-Stow
second row seat

(1)

(2)

(4)

(3)

(5)

(1)
(2)
(3)
(4)

Remove the second row console from the front center console box.
Lower the center head restraint.
Pull the strap, then fold down the seatback.
Pull the lever behind the second center seat and lift the rear of the
seat to remove.
(5) Stow the seat in the front center console box.

NOTE: The second-row console can now be installed between the second
row seats.

Seats-Stowing third row seats

Pull

Seats-Returning third row seats

(2) Raise

(1) Pull

OVERVIEW

Refer to the Owner’s Manual for more details.

Seats-Folding down second row seats
(if equipped)

From inside

From outside

(1) Pull up

Right side remote seat release

(2) Fold down

Windshield wipers & washers

Front

Single wipe

Adjust frequency*

Interval wipe

Slow

Fast

Wash and wipe
Wipe
Interval wipe

Wash and wipe

SAFETY AND EMERGENCY FEATURES

* Intermittent windshield
wiper frequency adjustment
Rotate to increase/decrease
Pull to wash and wipe
wipe frequency.

Rear

FEATURES/OPERATIONS

Left side/center remote
seat release

FEATURES/OPERATIONS

Lights & turn signals

Headlights

With DRL OFF switch

Without DRL OFF switch

Auto (if equipped)

Headlights
Parking lights

Headlights
Parking lights
Auto
DRL OFF

Low beam

High beam flasher

High beam

-Daytime Running Light system (DRL) (if equipped) Automatically turns
on the headlights at a reduced intensity.
-Automatic light cut off system Lights automatically turn off after a
delay of 30 seconds, or when lock switch on remote is pushed after
all doors are locked.

Front fog lights (if equipped)

Turn

Front fog lights come on only when the headlights are on low beam.

Turn signals

Right turn

Lane change

Lane change
Left turn

Power outlets-12V DC

Instrument panel (without seat heater)

Center console

Luggage compartment

Power outlets-120V AC (if equipped)

FEATURES/OPERATIONS

The “ENGINE START STOP”/ignition switch must be in the “ACC” or “ON”
position to be used.

OVERVIEW

Instrument panel (with seat heater)

Beside second row seat

SAFETY AND EMERGENCY FEATURES

The “ENGINE START STOP”/ignition switch must be in the “ON” position to
be used.

FEATURES/OPERATIONS

Multi-information display (if equipped)

Push “DISP” to change information in the following:
(1) Average gas mileage after refueling
(2) Current gas mileage
(3) Miles left on remaining fuel
(4) Driving distance from engine start
(5) Average gas mileage
(6) Average gas mileage history

Push and hold “DISP” to set up the displays and the rearview
monitor displays.

Windows-Power

Driver side

Window lock switch

Up
Down

Automatic operation (driver’s window only) Push the switch completely
down or pull it completely up and release to fully open or close. To stop
window midway, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
18

Telephone controls (Bluetooth®)
(if equipped)

Microphone

OVERVIEW

Audio unit

Steering wheel telephone controls

FEATURES/OPERATIONS

Volume
Voice command
button

End call

Start call

Refer to “Using the hands-free phone system (for cellular phone),” Section
3-4 in the Owner’s Manual, or go to Toyota.LetsTalk.com for more
information about phone connections and compatibility.

SAFETY AND EMERGENCY FEATURES

Bluetooth® technology allows dialing or receipt of calls without taking
hands from the steering wheel or using a cable to connect the telephone
and the system.

FEATURES/OPERATIONS

Air Conditioning/Heating

Front automatic Air Conditioning
With rear Air Conditioning

Without rear Air Conditioning

Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air
intake and fan to adjust automatically.
Windshield airflow/defogger
Rear Air Conditioning ON/OFF
Fan speed
Outside rearview mirror (if equipped)/Rear window defogger
Recirculate cabin air (fresh air when OFF)
“DUAL” button
Indicator ON: Separate temperature settings for driver, front
passenger and rear passengers.
Indicator OFF: Synchronize temperature settings for driver and all
passengers.
Temperature selector (front passenger side)
Air Conditioning ON/OFF
“SYNC” button
Indicator ON: Synchronize temperature settings for driver and all
passengers.
Indicator OFF: Separate temperature settings for driver, front
passenger and rear passengers.
Temperature selector (rear)
Airflow vent
In “ ” or “ ” mode, use fresh air (“
” indicator OFF) to
reduce window fogging.
Climate control OFF
Temperature selector (driver side)
20

Front manual Air Conditioning
OVERVIEW
FEATURES/OPERATIONS

Fan speed
Outside rearview mirror (if equipped)/Rear window defogger
Temperature selector
Recirculate cabin air (fresh air when OFF)
Airflow vent
In “
” or “
” mode, use fresh air (“
” indicator OFF) to
reduce window fogging.
Air Conditioning ON/OFF
Use fresh air to quickly cool interior, then change to recirculate for
cooler air.
Use for quick cooling. Air intake will automatically be set to
recirculate.
Rear Air Conditioning ON/OFF (if equipped)

Rear automatic Air Conditioning (if equipped)

SAFETY AND EMERGENCY FEATURES

Fan speed
Temperature selector
Airflow vent
Automatic climate control ON
Climate control OFF

FEATURES/OPERATIONS
Rear manual Air Conditioning (if equipped)

Airflow vent
Temperature selector
Fan speed

Seat heaters (if equipped)

Driver’s seat

Push

Turn

Front passenger’s seat

Push knob to pop the controller out. Turn clockwise for heater.

Clock

Without multi-information display

With multi-information display

H-Hour set
M-Minute set

With multi-information display Press and hold “DISP” button. Select
“CLOCK” on menu screen. Adjust as indicated on screen.
22

Cruise control

Turning system ON/OFF
OVERVIEW

System ON/OFF

Functions
Resume2

Increase speed

Set

1
2

Decrease speed

The set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.

FEATURES/OPERATIONS

Cancel1

Garage door opener (HomeLink®)*
(if equipped)

Refer to “Garage door opener,” Section 3-7 in the Owner’s Manual for
more details.

For programming assistance, contact HomeLink® at 1-800-355-3515, or
visit http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.

SAFETY AND EMERGENCY FEATURES

Garage door openers manufactured under license from HomeLink®* can
be programmed to operate garage doors, estate gates, security lighting, etc.

FEATURES/OPERATIONS

Audio
Type 1

Preset buttons - functions in other
modes indicated above number

Eject CD

Mute

View CD
text

Station/CD
track scan

Push to turn
ON/OFF
Type 2

Seek station/
CD track select

Mode

Preset buttons - functions in other
modes indicated above button

Setting preset button Mode

Type 3 additional functions

CD player

Push to
adjust tone
Push to skip
up/down folder and & balance
radio category type

Mute
Load CD(s)

To scan tracks on a disc Push and hold “SCAN.” Push again to hold
selection.
CD changer (Type 3 only)
-To load one disc Push “LOAD” and insert one disc.
-To load multiple discs Push and hold “LOAD” until you hear a beep.
Insert one disc. Shutter will close and then re-open for next disc.
.
.
To select
v a file (MP3/WMA only) Turn “TUNE FILE” or “TUNE SCROLL” or
press “ ” or “ v ” on .
To select a folder (MP3/WMA only) Push either side of “TYPE.FOLDER.”
24

Radio

USB/AUX port

Without seat heater

With seat heater

Bluetooth® audio (if equipped)

Microphone

FEATURES/OPERATIONS

By inserting a mini plug into the USB/AUX port, you can listen to music
from a portable audio device through the vehicle’s speaker system while
in USB/AUX mode.
Audio unit

OVERVIEW

To preset stations Tune in the desired station and hold down a preset
button (1-6) (from
to
) until you hear a beep. Push desired preset
button (1-6) (from
to
) to select.
To scan stations Push and hold “SCAN” to scan preset stations. Push again
to hold selection.

Steering wheel audio switches

Selects a track and album
Turns the power on,
selects an audio source

The Bluetooth® audio system enables you to enjoy music played on a
portable digital audio player from the vehicle speaker via wireless
communication.

Refer to “Using the Bluetooth® audio system,” Section 3-3 in the Owner’s
Manual for more details.
25

SAFETY AND EMERGENCY FEATURES

Volume

FEATURES/OPERATIONS

Steering wheel controls (if equipped)

Audio control

A/C control

Volume control

A/C OFF

Temperature
selector

Auto A/C
ON

“v ”
Use to search within the selected audio medium (radio, CD, iPod®, etc.).
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to turn
the audio system OFF.

Downhill Assist Control system (DAC)
(if equipped)

“DAC” indicator blinking = Downhill assist
control system not engaged

Slip indicator blinking, “DAC”
indicator solid = Downhill assist
control system engaged

Downhill assist control system helps the vehicle to descend steep hills
while maintaining a low speed without brake pedal operation. Press the
“DAC” button (system will engage only when shifter is in S1 or R mode).
Pressing the button again will turn system off.
Refer to the Owner’s Manual for more details.

Hill-start Assist Control (HAC)
OVERVIEW

Brake
pedal

HAC helps prevent rolling backwards on an incline. To engage, push
further down on brake pedal while at a complete stop until a beep sounds
and slip indicator illuminates. HAC holds for approximately 2 seconds after
releasing brake pedal.
Refer to the Owner’s Manual for more details.

Cup holders

Console box

FEATURES/OPERATIONS

Front

Rear

SAFETY AND EMERGENCY FEATURES

Side table

SAFETY AND EMERGENCY FEATURES
Seat belts
Take up slack

Too high
Keep as low on
hips as possible

If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child
restraint system, refer to the Owner's Manual.

Tire Pressure Monitoring (warning)
System

System reset initialization
1. Push and hold “
SET” button
until the indicator blinks 3 times.
2. Wait a few minutes to allow
initialization to complete.

After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to “ON” and press and hold the
“
SET” button until indicator blinks three times. Let the vehicle sit for
a few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.

1-1. Key information

Keys
The following keys are provided with the vehicle.

Vehicles without smart key system (type A)
Master keys
Valet key
Key number plate

Vehicles without smart key system (type B)
Master keys
Valet key
Key number plate

Vehicles with smart key system
Electronic keys
• Operating the smart key
system (→P. 33)
• Operating
the
wireless
remote control function
(→P. 46)

Mechanical keys
Key number plate

1-1. Key information

Using the mechanical key (vehicles with smart key system)
Take out the mechanical key.

■ When required to leave a key to the vehicle with a parking attendant
Lock the glove box as circumstances demand. (→P. 377)
Vehicles without smart key system: Carry the master key for your own use
and provide the attendant with the valet key.
Vehicles with smart key system: Remove the mechanical key for your own
use and provide the attendant with the electronic key only.
■ Key number plate
Keep the plate in a safe place such as your wallet, not in the vehicle. In the
event that a key is lost, a new key can be made by your Toyota dealer using
the key number plate. (→P. 537)
■ When riding in an aircraft (vehicles with smart key system)
When bringing an electronic key onto an aircraft, make sure you do not
press any buttons on the electronic key while inside the aircraft cabin. If you
are carrying an electronic key in your bag etc., ensure that the buttons are
not likely to be pressed accidentally. Pressing a button may cause the electronic key to emit radio waves that could interfere with the operation of the
aircraft.

Before driving

After using the mechanical key,
store it in the electronic key. Carry
the mechanical key together with
the electronic key. If the electronic
key battery is depleted, you will
need the mechanical key.
(→P. 538)

1-1. Key information

NOTICE
■ To prevent key damage
● Do not subject the keys to strong shocks, expose them to high temperatures by placing them in direct sunlight, or get them wet.
● Do not expose the keys to electromagnetic materials or attach any material that blocks electromagnetic waves to the key surface.
● Do not disassemble the key.

1-2. Opening, closing and locking the doors

Smart key system∗

The following operations can be performed simply by carrying the
electronic key on your person, for example in your pocket.
(The driver should always carry the electronic key.)
1
Electronic key

Electronic key

Before driving

Electronic key

Locks and unlocks the doors (→P. 34)
Starts the engine (→P. 166)
Opens the glass hatch (→P. 35)
Locks and unlocks the doors (→P. 34)

∗: If equipped
33

1-2. Opening, closing and locking the doors

Unlocking and locking the doors
Front door handles
Grip the handle to unlock the
doors.
Make sure to touch the sensor on
the back of the handle.
The door cannot be unlocked for
3 seconds after the door is
locked.

Press the lock button to lock the
doors.

Back door handle
Press the button to unlock the
door.
The door cannot be unlocked for
3 seconds after the door is
locked.
If you carry the electronic key on
your person, the back door can
be opened even if it is locked.
Lock the back door again when
you leave the vehicle. The back
door will not lock automatically
after it has been opened and then
closed.

1-2. Opening, closing and locking the doors

Press the button to lock the door.

Before driving

Opening the glass hatch (if equipped)
Press and hold the button to
open the glass hatch. The glass
hatch will pop up.
The glass hatch can be unlocked
only when the back door is
closed.

1-2. Opening, closing and locking the doors

Antenna location and effective range
■ Antenna location
Antennas outside the cabin
Antennas inside the cabin
Antenna outside the luggage
compartment

1-2. Opening, closing and locking the doors

■ Effective range (areas within which the electronic key is
detected)
When locking or unlocking
the doors

When starting the engine
or changing “ENGINE
START STOP” switch
modes
This system can be operated
when the electronic key is
inside the vehicle.

When opening the glass
hatch and locking or
unlocking the doors
This system can be operated
when the electronic key is
within about 2.3 ft. (0.7 m) of
the back door handle.

Before driving

This system can be operated
when the electronic key is
within about 2.3 ft. (0.7 m) of
either of the outside front
door handles.

1-2. Opening, closing and locking the doors

■ Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice)
■ Conditions affecting operation
The smart key system uses weak radio waves. In the following situations,
the communication between the electronic key and the vehicle may be
affected, preventing the smart key system and wireless remote control from
operating properly. (Ways of coping: →P. 538)
● When the electronic key battery is depleted
● Near a TV tower, electric power plant, gas station, radio station, large display, airport or other facility that generates strong radio waves or electrical noise
● When carrying a portable radio, cellular phone, cordless phone or other
wireless communication devices
● When the electronic key is in contact with, or is covered by a metallic
object
● When multiple electronic keys are in the vicinity
● When carrying or using the electronic key together with the following
devices that emit radio waves
• Another vehicle’s electronic key
• A wireless key that emits radio waves
• Personal computer
● If window tint with a metallic content or metallic objects are attached to
the rear window
■ Switching the door unlock function
It is possible to set which doors the entry function unlocks.
STEP 1 Turn the “ENGINE START STOP” switch OFF.
STEP 2 When the indicator on the key surface is turned off, push and hold

or
on the key.

for approximately 5 seconds while pushing

1-2. Opening, closing and locking the doors

The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Multi-information
display

Unlocking doors

Hold the front passenger’s
door handle to unlock all
doors.
Hold either front door handle to unlock all doors.

Before driving

Hold the driver's door handle to unlock only the
driver's door.

Beep

Exterior: Beeps three
times
Interior: Pings once

Exterior: Beeps twice
Interior: Pings once

STEP 3 Unlock the doors using the wireless remote control and open one of

the doors.
If a door is not opened within 60 seconds after
is pressed,
the doors will be locked again and the alarm will automatically be
set.
In case that the alarm is triggered, immediately stop the alarm.
(→P. 113)
■ Battery-saving function
In the following circumstances, the entry function is disabled in order to prevent the vehicle and electronic key batteries from discharging.
● When the entry function has not been used for 2 weeks or more
● When the electronic key has been left within approximately 3 ft. (1 m) of
the vehicle for 10 minutes or more
The system will resume operation when...
● The vehicle is locked using the door handle lock button.
● The vehicle is locked/unlocked using the wireless remote control function. (→P. 46)
● The vehicle is locked/unlocked using the mechanical key. (→P. 538)

1-2. Opening, closing and locking the doors

■ Electronic key battery depletion
● The standard battery life is 1 to 2 years. (The battery becomes depleted
even if the electronic key is not used.) If the smart key system or the
wireless remote control function does not operate, or the detection area
becomes smaller, the battery may be depleted. Replace the battery when
necessary. (→P. 474)
● If the battery becomes low, an alarm will sound in the cabin when the
engine stops. (→P. 41)
● To avoid serious deterioration, do not leave the electronic key within 3 ft.
(1 m) of the following electrical appliances that produce a magnetic field.
•
•
•
•

TVs
Personal computers
Recharging cellular phones or cordless phones
Table lamps

■ To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get
the electronic key too close to the vehicle when operating the system from
the outside of the vehicle.
Depending on the position and holding condition of the electronic key, the
key may not be detected correctly and the system may not operate properly.
(The alarm may go off accidentally, or the door lock prevention may not function.)
■ Note for the entry function
● Even when the electronic key is within the effective range (detection
areas), the system may not operate properly in the following cases.
• The electronic key is too close to the window or outside door handle,
near the ground, or in a high place when the doors are locked or
unlocked.
• The electronic key is on the instrument panel, luggage cover, floor or in
the glove box when the engine is started or “ENGINE START STOP”
switch modes are changed.
● As long as the electronic key is within the effective range, the doors may
be locked or unlocked by anyone.
● Even if the electronic key is not inside the vehicle, it may be possible to
start the engine if the electronic key is near the window.

1-2. Opening, closing and locking the doors

● The doors may unlock if a large amount of water splashes on the door
handle, such as in the rain or in a car wash. (The doors will automatically
be locked after approximately 60 seconds if the doors are not opened
and closed.)
● Gripping the door handle when wearing a glove may not unlock the door.

■ When the vehicle is not driven for extended periods
To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle.
■ Security feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
■ Alarms and warning indicators
A combination of exterior and interior alarms as well as warning lights and
warning messages shown on the multi-information display are used to
reduce the chance of vehicle theft and accidents resulting from erroneous
operation.
● When any warning lights come on:
Take appropriate measures according to which warning light comes on.
(→P. 508)
● When a warning message is shown on the multi-information display:
Take appropriate measures according to the warning message on the
multi-information display. (→P. 519)

Before driving

● If the wireless remote control is used to lock the doors when the electronic key is near the vehicle, there is a possibility that the door may not
be unlocked by the entry function. (Use the wireless remote control to
unlock the doors.)

1-2. Opening, closing and locking the doors

● When an alarm sounds:
Take appropriate measures according to the following table.
Alarm

Correction procedure

Tried to lock the doors
using the entry function
while the electronic key
was still inside the passenger compartment.

Retrieve the electronic key from the
passenger compartment and lock the
doors again.

Tried to close the glass
hatch with the electronic
key inside and all doors
locked.

Retrieve the electronic key and close
the glass hatch.

Exterior alarm
sounds once for
60 seconds

Tried to exit the vehicle
with the electronic key and
lock the doors without first
turning the “ENGINE
START STOP” switch OFF.

Turn the “ENGINE
START STOP” switch
OFF and lock the
doors again.

Exterior alarm
sounds once for
10 seconds

Tried to lock the vehicle
using the entry function
while a door was open.

Close all of the doors
and lock the doors
again.

Interior alarm
sounds continuously

Tried to open the door and
exit the vehicle without
shifting the shift lever to P.

Shift the shift lever to
P.

Interior alarm
beeps repeatedly

Switched to ACCESSORY
mode while the driver's
door was open. (Opened
the driver's door when the
“ENGINE START STOP”
switch was in ACCESSORY mode.)

Turn the “ENGINE
START STOP” switch
OFF and close the
driver's door.

Turned the “ENGINE
START STOP” switch OFF
while the driver's door was
open.

Close the driver's
door.

Exterior alarm
sounds once for
2 seconds

Situation

1-2. Opening, closing and locking the doors

Alarm

Situation

Correction procedure

Interior and exterior alarms sound
continuously.*

Tried to close the driver’s
door after carrying the key
outside the vehicle with the
“ENGINE START STOP”
switch in IGNITION ON or
ACCESSORY mode and
without the shift lever
being in P.

Shift the shift lever to
P, turn the “ENGINE
START STOP” switch
OFF and close the
driver’s door again.

The electronic key has a
low battery.

Replace the electronic
key battery.

Tried to start the engine
without the electronic key
being present, or when the
electronic key was not
functioning normally.

Start the engine with
the electronic key
present.

Tried to close the driver’s
door after carrying the key
outside the vehicle without
turning the “ENGINE
START STOP” switch OFF.

Turn the “ENGINE
START STOP” switch
OFF and close the
driver’s door again.

An occupant carried the
electronic key outside the
vehicle and closed the
door when the “ENGINE
START STOP” switch was
in IGNITION ON or
ACCESSORY mode.

Bring the electronic
key back into the vehicle.

Interior alarm
beeps once and
exterior alarm
sounds 3 times.*

Before driving

Interior alarm
beeps once.*

: A message will be shown on the multi-information display.

■ If the smart key system does not operate properly
● Locking and unlocking the doors: Use the mechanical key. (→P. 538)
● Starting the engine. (→P. 538)
■ When the electronic key battery is fully depleted
→P. 474

1-2. Opening, closing and locking the doors

■ Customization that can be configured at Toyota dealer
It is possible to deactivate the smart key system etc.
(Customizable features →P. 582)
■ Certification for the smart key system
For vehicles sold in the U.S.A.
FCC ID: NI4TMLF-3
HYQ14AAB
HYQ13BZS
HYQ14ABK
HYQ13CZA
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

1-2. Opening, closing and locking the doors

CAUTION
■ Caution regarding interference with electronic devices

● Users of any electrical medical device other than implanted pacemakers
and implanted cardiac defibrillators should consult the manufacturer of the
device for information about its operation under the influence of radio
waves.
Radio waves could have unexpected effects on the operation of such
medical devices.
Ask your Toyota dealer for details for disabling the entry function.

Before driving

● People with implanted pacemakers or cardiac defibrillators should keep
away from the smart key system antennas. (→P. 36) The radio waves may
affect the operation of such devices. If necessary, the entry function can
be disabled. Ask your Toyota dealer for details, such as the frequency of
radio waves and timing of emitting the radio waves. Then, consult your
doctor to see if you should disable the entry function.

1-2. Opening, closing and locking the doors

Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle from outside the vehicle.

Vehicles without smart key system (type A)
Locks all doors
Unlocks all doors
Pressing the button unlocks
the driver’s door. Pressing the
button again within 3 seconds
unlocks the other doors.

Pushing
and
holding:
Opens and closes the
power back door
Pushing
and
holding:
Opens the glass hatch
The glass hatch can be
opened only when the back
door is closed.

Pushing
and
Sounds alarm

holding:

1-2. Opening, closing and locking the doors

Vehicles without smart key system (type B)
Locks all doors
Unlocks all doors
1

Pushing
and
Sounds alarm

Before driving

Pressing the button unlocks
the driver’s door. Pressing the
button again within 3 seconds
unlocks the other doors.

holding:

Pushing
and
holding:
Opens the glass hatch
(vehicles with glass hatch)
The glass hatch can be
opened only when the back
door is closed.

Vehicles with smart key system
Locks all doors
Unlocks all doors
Pressing the button unlocks
the driver’s door. Pressing the
button again within 3 seconds
unlocks the other doors.

Pushing
and
holding:
Opens and closes the
power back door (vehicles
with power back door)
Pushing
and
Sounds alarm

holding:

1-2. Opening, closing and locking the doors

■ Operation signals
Doors: A buzzer sounds and the emergency flashers flash to indicate that
the doors have been locked/unlocked. (Locked: Once; Unlocked:
Twice)
Back door: A buzzer sounds and the emergency flashers flash twice to
indicate that the back door has been opened/closed.
■ Panic mode
Vehicles without smart key system
When
is pushed for longer than
about one second, an alarm will sound for
about 60 seconds and the vehicle lights
will flash to deter any person from trying
to break into or damage your vehicle.
To stop the alarm, push any button on the
wireless remote control.
Vehicles with smart key system
When
is pushed for longer than
about one second, an alarm will sound for
about 60 seconds and the vehicle lights
will flash to deter any person from trying
to break into or damage your vehicle.
To stop the alarm, push any button on the
wireless remote control.
■ Door lock buzzer
If a door is not fully closed, a buzzer sounds continuously if an attempt to
lock the door is made. Fully close the door to stop the buzzer, and lock the
vehicle once more.

1-2. Opening, closing and locking the doors

■ Key battery depletion
Vehicles without smart key system
The standard battery life is 1 to 2 years. (The battery becomes depleted
even if the key is not used.) If the wireless remote control function does not
operate, the battery may be depleted. Replace the battery when necessary.
(→P. 473)

Before driving

Vehicles with smart key system
→P. 474

■ If the wireless remote control does not operate properly
Vehicles without smart key system
Locking and unlocking the doors: Use the key. (→P. 52)
Vehicles with smart key system
● Locking and unlocking the doors: Use the mechanical key. (→P. 538)
● Starting the engine. (→P. 538)
■ Security feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
■ Alarm
Using the wireless remote control to lock the doors will set the alarm system.
(→P. 113)

1-2. Opening, closing and locking the doors

■ Conditions affecting operation
Vehicles without smart key system
The wireless remote control function may not operate normally in the following situations.
● Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves
● When carrying a portable radio, cellular phone or other wireless communication device
● When multiple wireless keys are in the vicinity
● When the wireless key is in contact with, or is covered by a metallic
object
● When a wireless key (that emits radio waves) is being used nearby
● When the wireless key has been left near an electrical appliance such as
a personal computer
Vehicles with smart key system
→P. 38
■ Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control) can be changed.
(Customizable features →P. 582)
■ Reversing the operation of the power back door
Pressing the wireless remote control switch again while the power back door
is operating will cause the operation to reverse.
■ When riding in an aircraft (vehicle without smart key system)
When bringing a wireless remote control onto an aircraft, make sure you do
not press any buttons on the wireless remote control while inside the aircraft
cabin. If you are carrying a wireless remote control in your bag etc., ensure
that the buttons are not likely to be pressed accidentally. Pressing a button
may cause the wireless remote control to emit radio waves that could interfere with the operation of the aircraft.

1-2. Opening, closing and locking the doors

■ Certification for wireless remote control
MODEL/FCC IDs:
Transmitter: GQ43VT20T
Receiver: GQ4-34R

IC (Canada) IDs:
Receiver: 1470A-6R
MADE IN U.S.A.
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
WARNING:
Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.

Before driving

Transmitter: 1470A-1T

1-2. Opening, closing and locking the doors

Side doors
The vehicle can be locked and unlocked using the entry function,
wireless remote control, key or door lock switch.

■ Entry function (vehicles with smart key system)
→P. 33
■ Wireless remote control
→P. 46
■ Key
Vehicles without smart key system
Locks all doors
Unlocks all doors
Turning the key unlocks the
driver's door. Turning the key
again unlocks the other doors.

Vehicles with smart key system
The doors can also be locked and unlocked with the mechanical
key. (→P. 538)

1-2. Opening, closing and locking the doors

■ Door lock switch
Locks all doors
Unlocks all doors
1

Before driving

■ Inside lock button
Locks the door
Unlocks the door
Pulling the door handle can
open the front door even if the
lock button is in the lock position.

1-2. Opening, closing and locking the doors

Rear door child-protector lock
The door cannot be opened from
inside the vehicle when the lock
is set.
These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear
doors.

Automatic door locking and unlocking systems
The following functions can be set or canceled:
Function

Operation

Shift position linked
door locking function

Shifting the shift lever out of P locks all
doors.

Shift position linked
door unlocking function

Shifting the shift lever to P unlocks all doors.

Speed linked door locking function

All the doors are locked when the vehicle
speed is approximately 12 mph (20 km/h) or
higher.

Driver's door linked door
unlocking function
(vehicles without smart
key system)

All the doors are unlocked when the driver's
door is opened within 10 seconds after turning
the engine switch to “ACC” or “LOCK”.

Driver's door linked door
unlocking function
(vehicles with smart key
system)

All the doors are unlocked when the driver's
door is opened within 10 seconds after turning
the “ENGINE START STOP” switch off.

1-2. Opening, closing and locking the doors

■ Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
Vehicles without smart key system:
Close all the doors and turn the engine switch to the “ON”
position. (Perform step 2 within 10 seconds.)
Vehicles with smart key system:
Close all the doors and switch the “ENGINE START STOP”
switch to IGNITION ON mode. (Perform step 2 within 10 seconds.)

STEP 2

Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
or
) for
approximately 5 seconds and
then release it.
The shift lever and switch positions corresponding to the
desired function to be set are
shown as follows.
Use the same procedure to cancel the function.
Function

Shift position linked door locking function
Shift position linked door
unlocking function

Shift lever position

Driver’s door lock
switch position

Speed linked door locking function
Driver's door linked door unlocking function

Before driving

STEP 1

1-2. Opening, closing and locking the doors

When the setting or canceling operation is complete, all doors are
locked and then unlocked.
■ When locking the doors using the key
Vehicles without smart key system
The door cannot be locked if the key is in the engine switch.
Vehicles with smart key system
The door cannot be locked if the “ENGINE START STOP” switch is in
ACCESSORY or IGNITION ON mode, or the electronic key is left inside
the vehicle.
Depending on the position of the electronic key, the key may not be
detected correctly and the door may be locked.
■ Customization that can be configured at Toyota dealer
Settings (e.g. door unlocking function) can be changed.
(Customizable features →P. 582)

CAUTION
■ To prevent an accident
Observe the following precautions while driving the vehicle.
Failing to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.
● Always use a seat belt.
● Always lock the doors.
● Ensure that all doors are properly closed.
● Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers are thrown out of the vehicle and it may result in serious injury or death.
Be especially careful of the front doors, as they may be opened even if the
inside lock buttons are in the locked position.
● Set the rear door child protector locks when children are seated in the rear
seats.

1-2. Opening, closing and locking the doors

Back door
The back door can be locked/unlocked and opened by the following
procedures.

■ Locking and unlocking the back door
1

Door lock switch
→P. 53

Before driving

Entry function (vehicles with smart key system)
→P. 34
Wireless remote control
→P. 46
Key
→P. 52
■ Opening the back door from outside the vehicle
Back door opener
Raise the back door while
pushing up the back door
opener switch.

Wireless remote control (vehicles with power back door)
→P. 46

1-2. Opening, closing and locking the doors

■ Opening the back door from inside the vehicle (vehicles
with power back door)
Push and hold the switch to
open/close.
Pushing the switch again while
the power back door is operating will cause the operation to
reverse.

Power back door switch (vehicles with power back door)
Push the switch to close.
Pushing the switch again while
the power back door is closing
will cause it to open again.

A buzzer sounds and the emergency flashers flash twice to indicate
that the back door has been opened/closed.
The back door can be opened even if it is locked. Lock the back door
again when you leave the vehicle. The back door will not lock automatically after it has been opened and then closed.

1-2. Opening, closing and locking the doors

Canceling the power back door system (vehicles with power back door)
Turn the main switch in the glove
box off to disable the power back
door system.

Off
A buzzer sounds twice and the
back door can then not be
opened with the wireless remote
control or power back door
switch.

■ Back door strap
Use the strap when closing.

Before driving

1-2. Opening, closing and locking the doors

■ If the back door opener is inoperative
The back door can be operated from the inside.
STEP 1

Remove the cover.

STEP 2

Turn the lever.

■ The power back door can be opened when
● The “ENGINE START STOP” switch is in IGNITION ON mode, and the
shift lever is in P.
● The “ENGINE START STOP” switch is in OFF or in ACCESSORY mode.
The power back door can be opened even when the glass hatch is opened.
The glass hatch will not be closed when the power back door is being
closed. Close the glass hatch manually.
■ Jam protection function (vehicles with power back door)
If anything obstructs the power back door while it is closing/opening, the
back door will automatically operate in the opposite direction.

1-2. Opening, closing and locking the doors

■ If the power back door does not work
The back door must be initialized. To initialize, close the back door completely by hand.
■ Back door closer (vehicles with power back door)
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.
If excessive force is applied to the back door while it is opening automatically, the power back door will stop at that position, preventing itself from falling down.
■ Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control) can be changed.
(Customizable features →P. 582)

Before driving

■ Fall-down protection function (vehicles with power back door)

1-2. Opening, closing and locking the doors

CAUTION
■ Caution while driving
● Keep the back door closed while driving.
If the back door is left open, it may hit near-by objects while driving or luggage may be unexpectedly thrown out, causing an accident.
In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the back door before driving.
● Before driving the vehicle, make sure that the back door is fully closed. If
the back door is not fully closed, it may open unexpectedly while driving,
causing an accident.
● Never let anyone sit in the luggage compartment. In the event of sudden
braking or a collision, they are susceptible to death or serious injury.
■ When children are in the vehicle
Observe the following precautions.
Failure to do so may result in death or serious injury.
● Do not leave children alone in the luggage compartment.
If a child is accidentally locked in the luggage compartment, they could
have heat exhaustion.
● Do not allow a child to open or close the back door.
Doing so may cause the back door to operate unexpectedly, or cause the
child’s hands, head, or neck to be caught by the closing back door.

1-2. Opening, closing and locking the doors

CAUTION
■ Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the body to be caught, resulting in death
or serious injury.

● When opening or closing the back door, thoroughly check to make sure
the surrounding area is safe.
● If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.
● Use caution when opening or closing the back door in windy weather as it
may move abruptly in strong wind.
● The back door may fall if it is not
opened fully. It is more difficult to open
or close the back door on an incline
than on a level surface, so beware of
the back door unexpectedly opening or
closing by itself. Make sure that the
back door is fully open and secure
before using the luggage compartment.
● When closing the back door, take extra
care to prevent your fingers etc. from
being caught.
● When closing the back door, make sure
to press it lightly on its outer surface. If
the back door strap is used to fully
close the back door, it may result in
hands or arms being caught.
● Do not pull on the back door damper stay to close the back door, and do
not hang on the back door damper stay.
Doing so may cause hands to be caught or the back door damper stay to
break, causing an accident.

Before driving

● Remove any heavy loads, such as snow and ice, from the back door
before opening it. Failure to do so may cause the back door to fall closed
again after it is opened.

1-2. Opening, closing and locking the doors

CAUTION
● Do not attach any accessories other than genuine Toyota parts to the back
door. Such additional weight on the back door may cause the back door to
fall closed again after it is opened.
■ Back door closer (vehicles with power back door)
● In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position. It takes several seconds
before the back door closer begins to
operate. Be careful not to catch fingers
or anything else in the back door, as
this may cause bone fractures or other
serious injuries.
● Use caution when using the back door closer as it still operates when the
power back door system is canceled.
■ Power back door
Observe the following precautions when operating the power back door.
Failure to do so may cause death or serious injury.
● Check the safety of the surrounding area to make sure there are no obstacles or anything that could cause any of your belongings to get caught.
● If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.
● If the power back door main switch is turned off while the back door is
operating during automatic operation, the back door stops operating. Take
extra care when on an incline, as the back door may open or close suddenly.

1-2. Opening, closing and locking the doors

CAUTION
● On an incline, the back door may fall after it opens automatically. Make
sure the back door is fully open and secure.

• When the back door contacts an obstacle
• Vehicles without smart key system: When the battery voltage suddenly
drops, such as when the engine switch is turned to the “ON” position or
the engine is started during automatic operation
• Vehicles with smart key system: When the battery voltage suddenly
drops, such as when the “ENGINE START STOP” switch is turned to
IGNITION ON mode or the engine is started during automatic operation
● Do not attach any accessories other than genuine Toyota parts to the back
door. The power back door may not operate, causing itself to malfunction,
or the back door may fall closed again after it is opened.
● In cases such as when replacing tires, make sure to turn off the power
back door main switch. Failure to do so may cause the back door to operate unintentionally if the power back door switch is accidentally touched,
resulting in hands and fingers being caught and injured.
■ Jam protection function (vehicles with power back door)
Observe the following precautions.
Failure to do so may cause death or serious injury.
● Never use any part of your body to intentionally activate the jam protection
function.
● The jam protection function may not work if something gets caught just
before the back door fully closes. Be careful not to catch fingers or anything else.
● The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.

Before driving

● In the following situations, the power back door may detect an abnormality
and automatic operation may be stopped. In this case, the back door has
to be operated manually. Take extra care in this situation, as the stopped
back door may suddenly fall, causing an accident.

1-2. Opening, closing and locking the doors

NOTICE
■ Back door damper stays
The back door is equipped with damper stays that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to the back door damper stay, resulting
in malfunction.
● Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.
● Do not touch the damper stay rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Toyota parts to the back
door.
● Do not place your hand on the damper
stay or apply lateral forces to it.
■ To prevent back door closer malfunction
Do not apply excessive force to the back door while the back door closer is
operating.
■ To prevent damage to the power back door
● Make sure that there is no ice between the back door and frame that
would prevent movement of the back door. Operating the power back door
when excessive load is present on the back door may cause a malfunction.
● Do not apply excessive force to the back door while the power back door
is operating.
● Take care not to damage the sensors (installed on the right and left edges
of the power back door) with a knife or other sharp object. If the sensor is
disconnected, the power back door will not operate in automatic operation.

1-2. Opening, closing and locking the doors

Glass hatch∗

The glass hatch can be opened using the glass hatch opener or wireless remote control.

■ Wireless remote control (vehicles without smart key system)

→P. 46
Before driving

■ Entry function (vehicles with smart key system)
→P. 34
■ Glass hatch opener
Press and hold the button to
pop up the glass hatch.
Raise
The glass hatch can be
opened only when the back
door is closed.

■ Opening and closing the glass hatch
● Make sure that the rear wiper is switched off.
● Do not rotate the rear wiper arm while the glass hatch is opening. (If the
rear wiper arm is rotated, close the glass hatch as it is then switch on the
wiper. The rear wiper arm will return to the correct position automatically
after wiping.)
● Make sure that the back door is closed before closing the glass hatch.

∗: If equipped
67

1-2. Opening, closing and locking the doors

CAUTION
■ While driving
● Keep the glass hatch closed while driving.
If the glass hatch is left open, it may hit near-by objects while driving or
luggage may be unexpectedly thrown out, causing an accident.
In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the glass hatch before driving.
● Before driving the vehicle, make sure that the glass hatch is fully closed. If
the glass hatch is not fully closed, it may open unexpectedly while driving,
causing an accident.
■ When children are in the vehicle
Do not allow a child to open or close the glass hatch.
Doing so may cause the glass hatch to operate unexpectedly, or cause the
child's hands, head, or neck to be caught by the closing glass hatch.
■ Operating the glass hatch
Observe the following precautions.
Failure to do so may cause parts of the body to be caught, resulting in death
or serious injury.
● Remove any heavy loads, such as snow and ice, from the glass hatch
before opening it. Failure to do so may cause the glass hatch fall closed
again after it is opened.
● When opening or closing the glass hatch, thoroughly check to make sure
the surrounding area is safe.
● If anyone is in the vicinity, make sure they are safe and let them know that
the glass hatch is about to open or close.
● Use caution when opening or closing the glass hatch in windy weather as
it may move abruptly in strong wind.

1-2. Opening, closing and locking the doors

CAUTION

● When closing the glass hatch, take
extra care to prevent your fingers etc.
from being caught. Also pay attention to
your personal belongings such as bags
and ties.
● When closing the glass hatch, make
sure to press it lightly on its outer surface.
● Do not pull on the glass hatch damper stay to close the glass hatch, and
do not hang on the glass hatch damper stay.
Doing so may cause hands to be caught or the glass hatch damper stay to
break, causing an accident.
● Do not attach any accessories other than genuine Toyota parts to the
glass hatch. Such additional weight on the glass hatch may cause the
glass hatch to fall closed again after it is opened, resulting in death or serious injury.
● Do not open the glass hatch while the rear wiper is switched on. (If the rear
wiper is switched on while the glass hatch is opening, the wiper motor
drive disc is swinging at the door panel.)

Before driving

● The glass hatch may fall if it is not
opened fully. It is more difficult to open
or close the glass hatch on an incline
than on a level surface, so beware of
the glass hatch unexpectedly opening
or closing by itself. Make sure that the
glass hatch is fully open and secure
before using the luggage compartment. Also pay attention to your personal belongings such as bags and
ties.

1-2. Opening, closing and locking the doors

CAUTION
● Do not insert any object in the wiper
motor drive disc.

● Do not close the glass hatch while the rear wiper is switched on. The rear
wiper arm may be restarted suddenly after closing the glass hatch.

NOTICE
■ Glass hatch damper stays
The glass hatch is equipped with damper stays that hold the glass hatch in
place. Observe the following precautions.Failure to do so may cause damage to the glass hatch damper stay, resulting in malfunction.
● Do not attach any foreign objects, such
as strikers, plastic sheets, or adhesives
to the damper stay rod.
● Do not touch the damper stay rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Toyota parts to the glass
hatch.
● Do not place your hand or foot on the
damper stay or apply lateral forces to it.

1-3. Adjustable components (seats, mirrors, steering wheel)

Front seats
Manual seat

Before driving

Seat position adjustment lever
Seatback angle adjustment lever
Vertical height adjustment lever (driver’s side only)
Seat cushion (front) angle adjustment knob (driver’s side only)
Pull up the lever until the lock is completely released.

1-3. Adjustable components (seats, mirrors, steering wheel)

Power seat

Seat position adjustment switch
Seatback angle adjustment switch
Seat cushion (front) angle adjustment switch (driver’s side only)
Vertical height adjustment switch (driver’s side only)
Driver’s seat leg support adjustment switch (if equipped)
Seat lumbar support adjustment switch (driver’s side only)

Active head restraints
When the occupant’s lower back
presses against the seatback
during a rear-end collision, the
head restraint moves slightly forward and upward to help reduce
the risk of whiplash to the seat
occupant.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Active head restraints
Even small forces applied to the seatback may cause the head restraint to
move. Pushing up a locked head restraint forcibly may cause the inner structure of the head restraint to appear. This does not indicate a problem.

Before driving

Inner
structure

During
rear-end
collision

CAUTION
■ Seat adjustment
● Be careful that the seat does not hit passengers or luggage.
● Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
● Manual seat only: After adjusting the seat, make sure that the seat is
locked in position.

1-3. Adjustable components (seats, mirrors, steering wheel)

Rear seats
■ Second seats
Seat position
lever

adjustment

Seatback angle adjustment
lever
Pull up the lever until the lock
is completely released.

■ Third seats
The third seats do not have a seat adjustment function.

Moving a second seat for third seat access
■ Getting in the vehicle (right side only)
Pull up the lever and fold down
the seatback. The seat will slide
forward.
Move the seat to the front-most
position.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Getting out of the vehicle (right side only)
Lift the lever on the side of the
seatback and fold down the seatback. The seat will slide forward.

■ After passengers have entered/exited the vehicle
Lift up the seatback and slide the seat backward until it locks.
Folding down the second seats
■ Before folding down the second seats
STEP 1

Stow the rear center seat belt
buckle.

STEP 2

Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.
This prevents the shoulder belt
from being damaged.
Make sure that the seat belts are
removed from the hangers before
using them.

Before driving

Move the seat to the front-most
position.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Folding down the second seats
From inside
Pull the lever to unlock the seatback and then fold the seatback
down.

From outside (if equipped)
Pull the lever.
L: Left side and center second
seats
R:Right side second seat

■ After folding down the second seats
Slide the folded second seats to
the rear-most position.

1-3. Adjustable components (seats, mirrors, steering wheel)

Folding down the third seats
■ Before folding down the third seats
Stow the third seat belt buckles.

STEP 2

Pass the seat belts through the
seat belt hangers.

Before driving

STEP 1

This helps to prevent the shoulder
belts from being damaged.
Make sure that the seat belts are
removed from the hangers before
using them.

■ Folding down the third seats
While pulling the straps, fold
down the seatbacks.
The head restraints will fold down
automatically when the straps are
pulled.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Returning the third seats
STEP 1

Pull the straps and raise the
seatbacks until they lock.

STEP 2

Raise the head restraints.

Removing the second center seat
■ Before removing the second center seat

STEP 1

Take out the side table from the
console box.

STEP 2

Lower the second center seat head restraint to the lowest
position. (→P. 82)

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Removing the second center seat
STEP 1

Fold down the second center
seatback while pulling the seatback lock release strap.

Pull the lock release lever to
remove the second center seat.

STEP 3

Stow the second center seat in
the console box.

STEP 4

Make sure that the seat is securely locked in position and
close the console box door.

Before driving

STEP 2

1-3. Adjustable components (seats, mirrors, steering wheel)

Installing the second center seat
■ Before installing the second center seat
STEP 1

STEP 2

Take out the second center seat
from the console box.

Remove the side table, if used, from the second seat.
(→P. 387)

■ Installing the second center seat
STEP 1

Fully engage the front pins
with the hooks, and swing the
second center seat downward.
Push down on the second
center seat to engage the rear
pin locks.

STEP 2

Unfold the seatback and lock it.
Stow the side table in the console
box.

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION
■ When adjusting a rear seat or removing the second center seat
● Be careful that the seat does not hit passengers or luggage.

● Be careful not to get your hands or feet caught in the seat.
■ Before folding down the rear seats
Do not fold down a rear seat when there are passengers sitting in the rear
seats or when there is luggage placed on the rear seats.
■ After adjusting the seats
Observe the following precautions. Failure to do so may result in death or
serious injury.
● Make sure that the seat and seatback are securely locked in position by
lightly rocking them back and forth.
● Second center seat: Make sure the seat is locked in place by trying to
shake the seatback and lift up the rear part of the seat cushion.
● Check that the seat belts are not twisted or caught under the seat.
■ Caution while driving
Keep the console box closed.
Injuries may result in the event of an accident or sudden braking.

NOTICE
■ When folding down the second seats
Do not fold the seatback forward with the luggage cover hooks attached.
■ Removed second center seat
Avoid putting heavy loads on the seat. The metallic seat pins may be damaged, and you may be unable to correctly reinstall the seat.

Before driving

● Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt. If the seat is too reclined,
the lap belt may slide past the hips and apply restraint forces directly to the
abdomen or your neck may contact the shoulder belt, increasing the risk of
death or serious injury in the event of an accident.

1-3. Adjustable components (seats, mirrors, steering wheel)

Head restraints
Head restraints are provided for all seats.

Front seats
Vertical adjustment
Up
Pull the head restraints up.

Down

Lock release button

Push the head restraint down
while pushing the lock release
button.

Angle adjustment (if equipped)

Second seats
Up
Pull the head restraints up.

Down
Push the head restraint down
while pushing the lock release
button.
Lock release buttons

When using the center seat,
raise the head restraint from
the stowed position.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ When using the third seat head restraints
To use
To fold
1

Before driving

■ Adjusting the height of the head restraints (except second center seat
and third seats)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

■ Adjusting the rear center seat head restraint
Always raise the head restraint one level from the stowed position when
using.
■ Removing the front and second seat outer head restraints
Pull the head restraint up while pushing
the lock release button.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Installing the front and second seat outer head restraints
Align the head restraint with the installation holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.

CAUTION
■ Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
● Use the head restraints designed for each respective seat.
● Adjust the head restraints to the correct position at all times.
● After adjusting the head restraints, push down on them and make sure
they are locked in position.
● Do not drive with the head restraints removed.

1-3. Adjustable components (seats, mirrors, steering wheel)

Seat belts
Make sure that all occupants are wearing their seat belts before driving the vehicle.

■ Correct use of the seat belts
1

Before driving

● Extend the shoulder belt so
that it comes fully over the
shoulder, but does not
come into contact with the
neck or slide off the shoulder.
● Position the lap belt as low
as possible over the hips.
● Adjust the position of the
seatback. Sit up straight
and well back in the seat.
● Do not twist the seat belt.
■ Fastening and releasing the seat belt
Fastening the belt
Push the tab into the buckle
until a clicking sound is heard.

Releasing the belt
Press the release button.
Release button

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Adjusting the height of the belt (front seats)
Down
Up
Move the height adjuster up
and down as needed until you
hear a click.

Seat belt pretensioners (front seats)
The pretensioner helps the seat
belt to quickly restrain the occupant by retracting the seat belt
when the vehicle is subjected to
certain types of severe frontal
collision or a vehicle rollover.
The pretensioner may not activate in the event of a minor frontal
impact, a side impact or a rear
impact.
■ Emergency locking retractor (ELR)
The retractor will lock the belt during a sudden stop or on impact. It may also
lock if you lean forward too quickly. A slow, easy motion will allow the belt to
extend so that you can move around fully.
■ Automatic locking retractor (ALR)
When a passenger's shoulder belt is completely extended and then
retracted even slightly, the belt is locked in that position and cannot be
extended. This feature is used to hold the child restraint system (CRS) firmly.
To free the belt again, fully retract the belt and then pull the belt out once
more. (→P. 144)
86

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Pregnant women
Obtain medical advice and wear the seat
belt in the proper way. (→P. 85)

If the seat belt is not worn properly, not
only a pregnant woman, but also the fetus
could suffer death or serious injury as a
result of sudden braking or a collision.
■ People suffering illness
Obtain medical advice and wear the seat belt in the proper way.
■ When not using the rear seat belts
Second seat belts
Pass the outer seat belts through the seat
belt hangers and secure the seat belt
plates to prevent the shoulder belts from
being damaged.

Third seat belts
Pass the outer seat belts through the seat
belt hangers to help prevent the shoulder
belts from being damaged.

Before driving

Women who are pregnant should position
the lap belt as low as possible over the
hips in the same manner as other occupants. Extend the shoulder belt completely over the shoulder and position the
belt across the chest. Avoid belt contact
over the rounding of the abdominal area.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Child seat belt usage
The seat belts of your vehicle were principally designed for persons of adult
size.
● Use a child restraint system appropriate for the child, until the child
becomes large enough to properly wear the vehicle's seat belt. (→P. 139)
● When the child becomes large enough to properly wear the vehicle's seat
belt, follow the instructions on P. 85 regarding seat belt usage.
■ Replacing the belt after the pretensioner has been activated
If the vehicle is involved in multiple collisions, the pretensioner will activate
for the first collision, but will not activate for the second or subsequent collisions.
■ Seat belt extender
If your seat belts cannot be fastened
securely because they are not long
enough, a personalized seat belt
extender is available from your Toyota
dealer free of charge.

CAUTION
Observe the following precautions to reduce the risk of injury in the event of
sudden braking, sudden swerving or an accident.
Failure to do so may cause death or serious injury.
■ Wearing a seat belt
● Ensure that all passengers wear a seat belt.
● Always wear a seat belt properly.
● Each seat belt should be used by one person only. Do not use a seat belt
for more than one person at once, including children.
● Toyota recommends that children be seated in the rear seat and always
use a seat belt and/or an appropriate child restraint system.

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION
● Do not recline the seat any more than necessary to achieve a proper seating position. The seat belt is most effective when the occupants are sitting
up straight and well back in the seats.

● Do not wear the shoulder belt under your arm.
■ Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your
shoulder. The belt should be kept away from your neck, but not falling off
your shoulder. Failure to do so could reduce the amount of protection in an
accident and cause death or serious injuries in the event of a sudden stop,
sudden swerve or accident. (→P. 86)
■ Seat belt pretensioners
● Do not place anything, such as a cushion, on the front passenger's seat.
Doing so will disperse the passenger's weight, which prevents the sensor
from detecting the passenger's weight properly. As a result, the seat belt
pretensioner for the front passenger's seat may not activate in the event of
a collision.
● If the pretensioner has activated, the SRS warning light will come on. In
that case, the seat belt cannot be used again and must be replaced at
your Toyota dealer.
■ Child restraint lock function belt precaution
Do not allow children to play with the child restraint lock function belt. If the
belt becomes twisted around a child’s neck, it will not be possible to pull the
belt out leading to choking or other serious injuries that could result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used
to cut the belt.

Before driving

● Always wear your seat belt low and snug across your hips.

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION
■ Seat belt damage and wear
● Do not damage the seat belts by allowing the belt, plate, or buckle to be
jammed in the door.
● Inspect the seat belt system periodically. Check for cuts, fraying, and loose
parts. Do not use a damaged seat belt until it is replaced. Damaged seat
belts cannot protect an occupant from death or serious injury.
● Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact your Toyota
dealer.
● Replace the seat assembly, including the belts, if your vehicle has been
involved in a serious accident, even if there is no obvious damage.
● Do not attempt to install, remove, modify, disassemble or dispose of the
seat belts. Have any necessary repairs carried out by your Toyota dealer.
Inappropriate handling of the pretensioner may prevent it from operating
properly resulting in death or serious injury.
■ Using a seat belt extender
● Do not wear the seat belt extender if you can fasten the seat belt without
the extender.
● Do not use the seat belt extender when installing a child restraint system
because the belt will not securely hold the child restraint system, increasing the risk of death or serious injury in the event of an accident.
● The personalized extender may not be safe on another vehicle, when
used by another person, or at a different seating position other than the
one originally intended.

NOTICE
■ When using a seat belt extender
When releasing the seat belt, press on the buckle release button on the
extender, not on the seat belt.
This helps prevent damage to the vehicle interior and the extender itself.

1-3. Adjustable components (seats, mirrors, steering wheel)

Steering wheel
The steering wheel can be adjusted to a comfortable position.
STEP 1

Hold the steering wheel and
press the lever down.
1

Before driving

STEP 2

Adjust to the ideal position by
moving the steering wheel
horizontally and vertically.
After adjustment, pull the lever
up to secure the steering
wheel.

CAUTION
■ Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and an accident,
resulting in death or serious injury.
■ After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an
accident and resulting in death or serious injury.

1-3. Adjustable components (seats, mirrors, steering wheel)

Anti-glare inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by
using the following functions.

■ Manual anti-glare inside rear view mirror
Normal position
Anti-glare position

■ Auto anti-glare inside rear view mirror
In automatic mode, sensors are used to detect the headlights of
vehicles behind and the reflected light is automatically reduced.
Type A
Turns automatic mode on/off
The indicator comes on when
automatic mode is turned on.
Vehicles without smart key
system:
The mirror will revert to automatic mode each time the
engine switch is turned to the
“ON” position.
Vehicles with smart key system:
The mirror will revert to automatic mode each time the
“ENGINE
START
STOP”
switch is turned to IGNITION
ON mode.

1-3. Adjustable components (seats, mirrors, steering wheel)

Type B
Turns automatic mode on/off
The indicator comes on when
automatic mode is turned on.

Before driving

Vehicles without smart key
system:
The mirror will revert to automatic mode each time the
engine switch is turned to the
“ON” position.
Vehicles with smart key system:
The mirror will revert to automatic mode each time the
“ENGINE
START
STOP”
switch is turned to IGNITION
ON mode.

Adjusting the height of the rear view mirror
Adjust the height of the rear view
mirror by moving it up and down.

1-3. Adjustable components (seats, mirrors, steering wheel)

■ To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)

Type A
To ensure that the sensors operate properly, do not touch or cover them.

Type B
To ensure that the sensors operate properly, do not touch or cover them.

CAUTION
■ Caution while driving
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and an accident, resulting in
death or serious injury.

1-3. Adjustable components (seats, mirrors, steering wheel)

Outside rear view mirrors
Mirror angle can be adjusted using the switches.
STEP 1

Select a mirror to adjust.
Left

Right
Before driving

STEP 2

Adjust the mirror.
Up
Right
Down
Left

1-3. Adjustable components (seats, mirrors, steering wheel)

Folding back the mirrors
Push backward to fold the mirrors.

■ The outside rear view mirrors can be operated when
Vehicles without smart key system
The engine switch is in the “ACC” or “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON
mode.
■ When the mirrors are fogged up (vehicles with outside rear view mirror
defoggers)
Turn on the mirror defoggers to defog the mirrors. (→P. 269)

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION
■ When driving the vehicle
Observe the following precautions while driving.
Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.
● Do not drive with the mirrors folded back.
● Both the driver and passenger side mirrors must be extended and properly
adjusted before driving.
■ When the mirror defoggers are operating (vehicles with outside rear
view mirror defoggers)
Do not touch the rear view mirror surfaces, as they can become very hot and
burn you.

Before driving

● Do not adjust the mirrors while driving.

1-4. Opening and closing the windows and moon roof

Power windows
The power windows can be opened and closed using the following
switches.

Closing
One-touch closing (driver’s
window only)*
Opening
One-touch opening (driver’s
window only)*

*: Pressing

the switch in the
opposite direction will stop window travel partway.

Lock switch
Press the switch down to lock
the passenger window switches.
Use this switch to prevent children from accidentally opening or
closing a passenger window.

1-4. Opening and closing the windows and moon roof

■ The power windows can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
1

Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Vehicles without smart key system
The power windows can be operated for approximately 45 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.
Vehicles with smart key system
The power windows can be operated for approximately 45 seconds after the
“ENGINE START STOP” switch is turned to ACCESSORY mode or turned
OFF. They cannot, however, be operated once either front door is opened.
■ Jam protection function (driver’s window only)
If an object becomes caught between the window and the window frame,
window travel is stopped and the window is opened slightly.

CAUTION
■ Closing the windows
Observe the following precautions.
Failing to do so may result in death or serious injury.
● Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
● Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.

Before driving

■ Operating the power windows after turning the engine off

1-4. Opening and closing the windows and moon roof

CAUTION
■ Jam protection function (driver’s window only)
● Never try jamming any part of your body to activate the jam protection
function intentionally.
● The jam protection function may not work if something gets caught just
before the window fully closes.
● The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.

100

1-4. Opening and closing the windows and moon roof

Moon roof∗

Use the overhead switches to open, close, and tilt the moon roof up
and down.

■ Opening and closing
1

Open

Close
Move the switch forward to
stop the moon roof partway.

■ Tilting up and down
Tilt up
Tilt down
Push the switch in either direction to stop the moon roof partway.

∗: If equipped
101

Before driving

The moon roof stops slightly
before the fully opened position.
Move the switch backward
again to fully open.

1-4. Opening and closing the windows and moon roof

■ The moon roof can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ Operating the moon roof after turning the engine off
Vehicles without smart key system
The moon roof can be operated for approximately 45 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. It cannot, however,
be operated once either front door is opened.
Vehicles with smart key system
The moon roof can be operated for approximately 45 seconds after the
“ENGINE START STOP” switch is turned to ACCESSORY mode or turned
OFF. They cannot, however, be operated once either front door is opened.
■ Jam protection function
If an object is detected between the moon roof and the frame while closing
or tilting down, travel is stopped and the moon roof opens slightly.
■ To reduce wind noise
Drive with the moon roof opened to slightly before the fully open position as
driving with the moon roof opened fully will cause wind noise.

102

1-4. Opening and closing the windows and moon roof

■ When the moon roof does not close normally
Perform the following procedure:
● If the moon roof closes but then re-opens slightly
STEP 1 Stop the vehicle.

STEP 2 Press and hold the “SLIDE (open/close)” switch in the close posi-

STEP 3 Check to make sure that the moon roof is completely closed and

then release the switch.
● If the moon roof tilts down but then tilts back up
STEP 1 Stop the vehicle.
STEP 2 Press and hold the “UP” switch*1 until the moon roof moves into the

tilt up position and stops.
STEP 3 Release the “UP” switch once and then press and hold the “UP”

switch again.*1
The moon roof will pause for approximately 10 seconds in the tilt up
position.*2 Then it will adjust slightly and pause for approximately 1
second. Finally, it will tilt down, open and close.
STEP 4 Check to make sure that the moon roof is completely closed and

then release the switch.
*1: If the switch is released at the incorrect time, the procedure will
have to be performed again from the beginning.
*2: If the switch is released after the above mentioned 10 second
pause, automatic operation will be disabled. In that case, press
and hold the “SLIDE (open/close)” switch in the close position or
the “UP” switch, and the moon roof will tilt up and pause for
approximately 1 second. Then it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and
then release the switch.
If the moon roof does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

103

Before driving

tion.*1
The moon roof will close, reopen and pause for approximately 10
seconds.*2 Then it will close again, tilt up and pause for approximately 1 second. Finally, it will tilt down, open and close.

1-4. Opening and closing the windows and moon roof

■ Sunshade
The sunshade can be opened and closed manually. However, the sunshade
will open automatically when the moon roof is opened.
■ Moon roof open reminder function (vehicles with multi-information display)
Vehicles without smart key system
An alarm will sound when the driver’s door is opened with the moon roof not
fully closed and the engine switch OFF.
Vehicles with smart key system
An alarm will sound when the driver’s door is opened with the moon roof not
fully closed and the “ENGINE START STOP” switch OFF.

CAUTION
■ Opening the moon roof
Observe the following precautions.
Failure to do so may cause death or serious injury.
● Do not allow any passengers to put their hands or heads outside the vehicle while it is moving.
● Do not sit on top of the moon roof.
■ Closing the moon roof
Observe the following precautions.
Failing to do so may result in death or serious injury.
● Check to make sure that all passengers do not have any part of their bodies in a position where it could be caught when the moon roof is being
operated.
● Do not allow children to operate the moon roof.
Closing the moon roof on someone can cause death or serious injury.

104

1-4. Opening and closing the windows and moon roof

CAUTION
■ Jam protection function
● Never try jamming any part of your body to activate the jam protection
function intentionally.

● The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.

105

Before driving

● The jam protection function may not work if something gets caught just
before the moon roof fully closes.

1-5. Refueling

Opening the fuel tank cap
Perform the following steps to open the fuel tank cap.

■ Before refueling the vehicle
Vehicles without smart key system
Turn the engine switch OFF and ensure that all the doors and
windows are closed.
Vehicles with smart key system
Turn the “ENGINE START STOP” switch OFF and ensure that
all the doors and windows are closed.
■ Opening the fuel tank cap
STEP 1

Open the fuel filler door.

STEP 2

Turn the fuel tank cap slowly
to open.

106

1-5. Refueling

STEP 3

Hang the fuel tank cap on the
back of the fuel filler door.
1

Before driving

Closing the fuel tank cap
When replacing the fuel tank
cap, turn it until a clicking sound
is heard.
Once the cap is released, it will
turn slightly in the opposite direction.

■ Fuel types
Use unleaded gasoline. (Octane rating 87 [Research Octane Number 91] or
higher)
■ Fuel tank capacity
Approximately 19.2 gal. (72.5 L, 15.9 Imp. gal.)

107

1-5. Refueling

CAUTION
■ Refueling the vehicle
Observe the following precautions while refueling the vehicle.
Failure to do so may result in death or serious injury.
● Touch the vehicle or some other metal surface to discharge any static
electricity.
Sparks resulting from discharging static electricity may cause the fuel
vapors to ignite.
● Always hold the grips on the fuel tank cap and turn it slowly to remove it.
A whooshing sound may be heard when the fuel tank cap is loosened.
Wait until the sound cannot be heard before fully removing the cap.
In hot weather, pressurized fuel may spray out of the filler neck and cause
injury.
● Do not allow anyone that has not discharged static electricity from their
bodies to come close to an open fuel tank.
● Do not inhale vaporized fuel.
Fuel contains substances that are harmful if inhaled.
● Do not smoke while refueling the vehicle.
Doing so may cause the fuel to ignite and cause a fire.
● Do not return to the vehicle or touch any person or object that is statically
charged.
This may cause static electricity to build up, resulting in a possible ignition
hazard.
■ When replacing the fuel cap
Do not use anything but a genuine Toyota fuel tank cap designed for your
vehicle. Doing so may cause a fire or other incident which may result in
death or serious injury.

108

1-5. Refueling

NOTICE
■ Refueling

109

Before driving

Do not spill fuel during refueling.
Doing so may damage the vehicle, such as causing the exhaust systems to
operate abnormally or damaging fuel system components or the vehicle's
painted surface.

1-6. Theft deterrent system

Engine immobilizer system∗
The vehicle's keys have built-in transponder chips that prevent the
engine from starting if the key has not been previously registered in
the vehicle's on-board computer.
Never leave the keys inside the vehicle when you leave the vehicle.

Vehicles without navigation system
Vehicles without smart key
system: The indicator light
flashes after the key has been
removed from the engine
switch to indicate that the system is operating.
The indicator light stops flashing after the registered key
has been inserted into the
engine switch to indicate that
the system has been canceled.
Vehicles with smart key system: The indicator light flashes
after the “ENGINE START
STOP” switch has been turned
OFF to indicate that the system is operating.
The indicator light stops flashing after the “ENGINE START
STOP” switch has been turned
to ACCESSORY or IGNITION
ON mode to indicate that the
system has been canceled.

∗: If equipped
110

1-6. Theft deterrent system

Vehicles with navigation system

The indicator light stops flashing after the registered key
has been inserted into the
engine switch to indicate that
the system has been canceled.
Vehicles with smart key system: The indicator light flashes
after the “ENGINE START
STOP” switch has been turned
OFF to indicate that the system is operating.
The indicator light stops flashing after the “ENGINE START
STOP” switch has been turned
to ACCESSORY or IGNITION
ON mode to indicate that the
system has been canceled.

111

Before driving

Vehicles without smart key
system: The indicator light
flashes after the key has been
removed from the engine
switch to indicate that the system is operating.

1-6. Theft deterrent system

■ System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
■ Conditions that may cause the system to malfunction
● If the key is in contact with a metallic object
● If the key is in close proximity to or touching a key with the security system (key with a built-in transponder chip) of another vehicle
■ Certifications for the engine immobilizer system
● For vehicles sold in the U.S.A.
Vehicles without smart key system
FCC ID: MOZRI-21BTY
Vehicles with smart key system
FCC ID: NI4TMIMB-1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
● For vehicles sold in Canada
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

NOTICE
■ To ensure the system operates correctly
Do not modify or remove the system.
If modified or removed, the proper operation of the system cannot be guaranteed.

112

1-6. Theft deterrent system

Alarm∗

The system sounds the alarm and flashes the lights when forcible
entry is detected.

■ Triggering of the alarm
The alarm is triggered in the following situations when the alarm
is set.

● A locked door is unlocked or opened in any way other than
using the entry function (vehicles with smart key system) or
wireless remote control or mechanical key. (The doors will
lock again automatically.)

Before driving

● The hood is opened.
● The locked glass hatch is opened in any way other than using
the wireless remote control door lock function or entry function
(vehicles with smart key system).
● The battery is reconnected.
■ Setting the alarm system
Vehicles without navigation system
Close the doors, glass hatch
and hood, and lock all the
doors. The system will be set
automatically after 30 seconds.
The indicator light changes
from being on to flashing when
the system is set.

∗: If equipped
113

1-6. Theft deterrent system

Vehicles with navigation system
Close the doors, glass hatch
and hood, and lock all the
doors. The system will be set
automatically after 30 seconds.
The indicator light changes
from being on to flashing when
the system is set.

■ Deactivating or stopping the alarm
● Unlock the doors.
● Vehicles without smart key system: Turn the engine switch to
the “ON” position, or start the engine. (The alarm will be deactivated or stopped after a few seconds.)
● Vehicles with smart key system: Turn the “ENGINE START
STOP” switch to IGNITION ON mode, or start the engine.
(The alarm will be deactivated or stopped after a few seconds.)
● Open the glass hatch using the entry function (vehicles with
smart key system) or wireless remote control (vehicles without smart key system).

■ System maintenance
The vehicle has a maintenance-free type alarm system.
■ Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure
of the following.
● Nobody is in the vehicle.
● The windows and moon roof are closed before the alarm is set.
● No valuables or other personal items are left in the vehicle.
114

1-6. Theft deterrent system

■ Triggering of the alarm
The alarm may be triggered in the following situations. (Stopping the alarm
deactivates the alarm system.)

● The battery is recharged or replaced
when the vehicle is locked.

■ Panic mode
→P. 48
■ When the battery is disconnected
Be sure to cancel the alarm system.
If the battery is disconnected before canceling the alarm, the system may be
triggered when the battery is reconnected.
■ Alarm-operated door lock
● When the alarm is operating, the doors are locked automatically to prevent intruders.
● Do not leave the key inside the vehicle when the alarm is operating, and
make sure the key is not inside the vehicle when recharging or replacing
the battery.
■ When using the key to unlock the doors
Deactivate the alarm.

115

Before driving

● A person inside the vehicle opens a
door or the hood when the vehicle is
locked.

1-6. Theft deterrent system

NOTICE
■ To ensure the system operates correctly
Do not modify or remove the system.
If modified or removed, the proper operation of the system cannot be guaranteed.

116

1-6. Theft deterrent system

Theft prevention labels (U.S.A.)

117

Before driving

These labels are attached to
the vehicle to reduce vehicle
theft by facilitating the tracing
and recovery of parts from stolen vehicles. Do not remove
under penalty of law.

1-7. Safety information

Correct driving posture
Drive in a good posture as follows:

Sit upright and well back in
the seat. (→P. 71)
Adjust the position of the
seat forward or backward to
ensure the pedals can be
reached
and
easily
depressed to the extent
required. (→P. 71)
Adjust the seatback so that
the controls are easily operable.
Adjust the tilt and telescopic
positions of the steering
wheel downward so the airbag is facing your chest.
(→P. 91)
Lock the head restraint in
place with the center of the
head restraint closest to the
top of your ears. (→P. 82)
Wear the seat belt correctly.
(→P. 85)

118

1-7. Safety information

CAUTION
■ While driving
● Do not adjust the position of the driver's seat while driving.
Doing so could cause the driver to lose control of the vehicle.

● Do not place anything under the front seats.
Objects placed under the front seats may become jammed in the seat
tracks and stop the seat from locking in place. This may lead to an accident. The adjustment mechanism may also be damaged.
■ Adjusting the seat position
● Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
● Do not put your hands under the seat or near the moving parts to avoid
injury.
Fingers or hands may become jammed in the seat mechanism.

119

Before driving

● Do not place a cushion between the driver or passenger and the seatback.
A cushion may prevent correct posture from being achieved, and reduce
the effectiveness of the seat belt and head restraint, increasing the risk of
death or serious injury to the driver or passenger.

1-7. Safety information

SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain
types of severe impacts that may cause significant injury to the
occupants. They work together with the seat belts to help reduce the
risk of death or serious injury.

Front airbags
Driver airbag/front passenger airbag
Can help protect the head and chest of the driver and front passenger from impact with interior components.
Driver knee airbag
Can help provide driver protection.
Side and curtain shield airbags
Side airbags
Can help protect the torso of the front seat occupants.
Curtain shield airbags
Can help protect primarily the head of occupants in the outer
seats.
120

1-7. Safety information

Airbag system components

Before driving

Curtain shield airbags

SRS warning light

Side airbags

Driver airbag

Front passenger airbag

Driver’s seat position sensor

Side and curtain shield airbag sensors
Door sensors

Driver’s seat belt buckle
switch

Front airbag sensors

Driver knee airbag

Front passenger’s seat belt
buckle switch

Airbag sensor assembly

Curtain shield airbag sensors

Occupant detection system
(ECU and sensors)

“AIR BAG ON” and “AIR
BAG OFF” indicator lights
Your vehicle is equipped with ADVANCED AIRBAGS designed based
on US motor vehicle safety standards (FMVSS208). The airbag system controls airbag deployment power for the driver and front passenger. The driver airbag system consists of the driver seat's position
sensor etc. The front passenger's airbag system consists of the front
passenger occupant classification sensor etc.
121

1-7. Safety information

The main SRS airbag system components are shown above. The
SRS airbag system is controlled by the airbag sensor assembly. The
airbag sensor assembly consists of a safing sensor and an airbag
sensor.
In certain types of severe frontal or side impacts, the SRS airbag system triggers the airbag inflators. A chemical reaction in the inflators
quickly fills the airbags with non-toxic gas to help restrain the motion
of the occupants.
■ SRS warning light
This warning light system monitors the airbag sensor assembly, front airbag
sensors, side and curtain shield airbag sensor assemblies, curtain shield airbag sensor assemblies, door sensors, driver's seat position sensor, driver's
seat belt buckle switch, front passenger occupant classification system, “AIR
BAG ON” and “AIR BAG OFF” indicator lights, front passenger’s seat belt
buckle switch, front seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. (→P. 509)
■ If the SRS airbags deploy (inflate)
● Bruising and slight abrasions may result from contact with a deploying
(inflating) SRS airbag.
● A loud noise and white powder will be emitted.
● Parts of the airbag module (steering wheel hub, airbag cover and inflator)
as well as the front seats, and parts of the front and rear pillars and roof
side rail, may be hot for several minutes. The airbag itself may also be
hot.
● The windshield may crack.

122

1-7. Safety information

■ SRS airbag deployment conditions (front airbags)
● The SRS front airbags will deploy in the event of an impact that exceeds
the set threshold level (the level of force corresponding to an approximately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that
does not move or deform).

● It is possible that in some collisions where the forward deceleration of the
vehicle is very close to the designed threshold level, the SRS front airbags and the seat belt pretensioners may not activate together.
● The SRS front passenger airbag will not activate if there is no passenger
sitting in the front passenger seat. However, the front passenger airbag
may deploy if luggage is put in the seat, or the seat belt is fastened, even
if the seat is unoccupied. (→P. 132)
■ SRS airbag deployment conditions (SRS side airbags)
● The SRS side airbags will deploy in the event of an impact that exceeds
the set threshold level (the level of force corresponding to the impact
force produced by an approximately 3300 lb. [1500 kg] vehicle colliding
with the vehicle cabin from a direction perpendicular to the vehicle orientation at an approximately speed of 12 - 18 mph [20 - 30 km/h]).
● The SRS side airbag on the passenger seat will not activate if there is no
passenger sitting in the front passenger seat. However, the side airbag
on the passenger seat may deploy if luggage is put in the seat, or the
seat belt is fastened, even if the seat is unoccupied. (→P. 132)
■ SRS airbag deployment conditions (SRS curtain shield airbags)
The SRS curtain shield airbags will deploy in the event of vehicle rollover or
an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 3300 lb. [1500 kg]
vehicle colliding with the vehicle cabin from a direction perpendicular to the
vehicle orientation at an approximately speed of 12 - 18 mph [20 - 30 km/h]).

123

Before driving

However, this threshold velocity will be considerably higher if the vehicle
strikes an object, such as a parked vehicle or sign pole, which can move or
deform on impact, or if the vehicle is involved in an underride collision (e.g.
a collision in which the front of the vehicle “underrides”, or goes under, the
bed of a truck, etc.).

1-7. Safety information

■ Conditions under which the SRS airbags may deploy (inflate), other
than a collision
The SRS front airbags may also deploy if a serious impact occurs to the
underside of your vehicle. Some examples are shown in the illustration.
● Hitting a curb, edge of pavement or
hard surface
● Falling into or jumping over a deep hole
● Landing hard or vehicle falling

The SRS curtain shield airbags may also deploy under the situation shown
in the illustration.
● The angle of vehicle tip-up is marginal.
● The vehicle skids and hits a curb stone.

■ Types of collisions that may not deploy the SRS airbag (front airbags)
The SRS front airbags are generally not designed to inflate if the vehicle is
involved in a side or rear collision, if it rolls over, or if it is involved in a lowspeed frontal collision. But, whenever a collision of any type causes sufficient forward deceleration of the vehicle, deployment of the SRS front airbags may occur.
● Collision from the side
● Collision from the rear
● Vehicle rollover

124

1-7. Safety information

■ Types of collisions that may not deploy the SRS airbag
(side airbags and curtain shield airbags)
The SRS side airbag and curtain shield airbag system may not activate if the
vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.

● Collision from the side at an angle

The SRS side airbags are not generally designed to inflate if the vehicle is
involved in a frontal or rear collision, if it rolls over, or if it is involved in a lowspeed side collision.
● Collision from the front
● Collision from the rear
● Vehicle rollover

The SRS curtain shield airbags are not generally designed to inflate if the
vehicle is involved in a frontal or rear collision, if it pitches end over end, or if
it is involved in a low-speed side collision.
● Collision from the front
● Collision from the rear
● Pitching end over end

125

Before driving

● Collision from the side to the vehicle
body other than the passenger compartment

1-7. Safety information

■ When to contact your Toyota dealer
In the following cases, contact your Toyota dealer as soon as possible.
● Any of the SRS airbags have been inflated.
● The front of the vehicle is damaged or
deformed, or was involved in an accident that was not severe enough to
cause the SRS airbags to inflate.

● A portion of a door is damaged or
deformed, or the vehicle was involved
in an accident that was not severe
enough to cause the SRS side airbags
and curtain shield airbags to inflate.

● The pad section of the steering wheel
or dashboard or lower portion of the
instrument panel is scratched, cracked,
or otherwise damaged.

● The surface of the seats with the side
airbag is scratched, cracked or otherwise damaged.
● The portion of the front pillars, rear pillars or roof side rail garnishes (padding)
containing the curtain shield airbags
inside is scratched, cracked or otherwise damaged.

126

1-7. Safety information

CAUTION
■ SRS airbag precautions
Observe the following precautions regarding the airbags.
Failure to do so may cause death or serious injury.

● The SRS driver airbag deploys with considerable force, and can cause
death or serious injury especially if the driver is very close to the airbag.
The National Highway Traffic Safety Administration (“NHTSA”) advises:
Since the risk zone for the driver’s airbag is the first 2 - 3 in. (50 - 75 mm) of
inflation, placing yourself 10 in. (250 mm) from your driver airbag provides
you with a clear margin of safety. This distance is measured from the center
of the steering wheel to your breastbone. If you sit less than 10 in. (250 mm)
away now, you can change your driving position in several ways:
• Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
• Slightly recline the back of the seat.
Although vehicle designs vary, many drivers can achieve the 10 in.
(250 mm) distance, even with the driver seat all the way forward, simply by reclining the back of the seat somewhat. If reclining the back of
your seat makes it hard to see the road, raise yourself by using a firm,
non-slippery cushion, or raise the seat if your vehicle has that feature.
• If your steering wheel is adjustable, tilt it downward. This points the airbag toward your chest instead of your head and neck.
The seat should be adjusted as recommended by NHTSA above, while still
maintaining control of the foot pedals, steering wheel, and your view of the
instrument panel controls.

127

Before driving

● The driver and all passengers in the vehicle must wear their seat belts
properly.
The SRS airbags are supplemental devices to be used with the seat belts.

1-7. Safety information

CAUTION
■ SRS airbag precautions
● If the seat belt extender has been connected to the driver's seat belt buckle
but the seat belt extender has not also
been fastened to the latch plate of the
driver's seat belt, the SRS driver's airbag system will judge that the driver is
wearing the seat belt even though the
seat belt has not been connected. In
this case, the driver's airbag may not
activate correctly in a collision, resulting
in death or serious injury in the event of
collision. Be sure to wear the seat belt
with the seat belt extender.
● The SRS front passenger airbag also deploys with considerable force, and
can cause death or serious injury especially if the front passenger is very
close to the airbag. The front passenger seat should be as far from the airbag as possible with the seatback adjusted, so the front passenger sits
upright.
● Improperly seated and/or restrained infants and children can be killed or
seriously injured by a deploying airbag. An infant or child who is too small
to use a seat belt should be properly secured using a child restraint system. Toyota strongly recommends that all infants and children be placed in
the rear seats of the vehicle and properly restrained. The rear seats are
the safest for infants and children. (→P. 139)

128

1-7. Safety information

CAUTION
■ SRS airbag precautions
● Do not sit on the edge of the seat or
lean against the dashboard.

● Do not drive the vehicle while the driver
or passenger has items resting on their
knees.
● Do not lean against the door, the roof
side rail or the front, side and rear pillars.

● Do not allow anyone to kneel on the
passenger seat toward the door or put
their head or hands outside the vehicle.

129

Before driving

● Do not allow a child to stand in front of
the SRS front passenger airbag unit or
sit on the knees of a front passenger.

1-7. Safety information

CAUTION
■ SRS airbag precautions
● Do not attach anything to or lean anything against areas such as the dashboard, steering wheel pad or lower
portion of the instrument panel.
These items can become projectiles
when SRS driver, front passenger and
knee airbags deploy.
● Do not attach anything to areas such as
the door, windshield glass, side door
glass, front and rear pillars, roof side
rail or assist grip.
● Do not hang coat hangers or other hard
objects on the coat hooks. All of these
items could become projectiles and
seriously injure or kill you, should the
SRS curtain shield airbag deploy.
● Vehicles without smart key system: Do
not attach any heavy, sharp or hard
objects such as keys or accessories to
the key. The objects may restrict the
SRS knee airbag inflation or be thrust
into the driver's seat area by the force
of the deploying airbag, thus causing a
danger.
● If the vinyl cover is put on the area where the SRS knee airbag will deploy,
be sure to remove it.
● Do not use seat accessories which cover the parts where the SRS side
airbags inflate as they may interfere with inflation of the airbags.
● Do not strike or apply significant levels of force to the area of the SRS airbag components (→P. 121).
Doing so can cause the SRS airbags to malfunction.

130

1-7. Safety information

CAUTION
■ SRS airbag precautions
● Do not touch any of the component parts immediately after the SRS airbags have deployed (inflated) as they may be hot.

● If the areas where the SRS airbags are stored, such as the steering wheel
pad and front and rear pillar garnishes, are damaged or cracked, have
them replaced by your Toyota dealer.
■ Modification and disposal of SRS airbag system components
Do not dispose of your vehicle or perform any of the following modifications
without consulting your Toyota dealer.
The SRS airbags may malfunction or deploy (inflate) accidentally, causing
death or serious injury.
● Installation, removal, disassembly and repair of the SRS airbags.
● Repairs, modifications, removal or replacement of the steering wheel,
instrument panel, dashboard, seats or seat upholstery, front, side and rear
pillars or roof side rails.
● Repairs or modifications of the front fender, front bumper, or side of the
occupant compartment.
● Installation of snow plows, winches, etc. to the front grille (bull bars, kangaroo bar etc.).
● Modifications to the vehicle's suspension system.
● Installation of electronic devices such as mobile two-way radios or CD
players.
● Modifications to your vehicle for a person with a physical disability.

131

Before driving

● If breathing becomes difficult after the SRS airbag has deployed, open a
door or window to allow fresh air in, or leave the vehicle if it is safe to do
so. Wash off any residue as soon as possible to prevent skin irritation.

1-7. Safety information

Front passenger occupant classification system
Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front
passenger.

Vehicles without navigation system

132

1-7. Safety information

Vehicles with navigation system

Before driving

SRS warning light
“AIR BAG OFF” indicator light
“AIR BAG ON” indicator light
Front passenger's seat belt reminder light

133

1-7. Safety information

Conditions and operation of the front passenger occupant
classification system
■ Adult*1

Indicator/
warning light

“AIR BAG ON” and “AIR BAG OFF” indicator lights

“AIR BAG
ON”

SRS warning light

Off

Front passenger's seat belt reminder
light

Flashing*2

Front passenger airbag
Side airbag on the front passenger seat
Devices

Curtain shield airbag in the front passenger side

Activated

Front passenger's seat belt pretensioner

■ Child*3 or child restraint system*4

Indicator/
warning light

“AIR BAG ON” and “AIR BAG OFF” indicator lights

“AIR BAG
OFF”*5

SRS warning light

Off

Front passenger's seat belt reminder
light

Flashing*2

Front passenger airbag

Deactivated

Side airbag on the front passenger seat
Devices

Curtain shield airbag in the front passenger side
Front passenger's seat belt pretensioner

134

Activated

1-7. Safety information

■ Unoccupied
“AIR BAG ON” and “AIR BAG OFF” indicator lights
Indicator/
warning light

Not illuminated

SRS warning light

Front passenger airbag

Deactivated

Before driving

Front passenger's seat belt reminder
light

Off

Side airbag on the front passenger seat
Devices

Curtain shield airbag in the front passenger side

Activated

Front passenger's seat belt pretensioner

Deactivated

■ There is a malfunction in the system

Indicator/
warning light

“AIR BAG ON” and “AIR BAG OFF” indicator lights

“AIR BAG
OFF”

SRS warning light

Front passenger's seat belt reminder
light

Off

Front passenger airbag

Deactivated

Side airbag on the front passenger seat
Devices

Curtain shield airbag in the front passenger side

Activated

Front passenger's seat belt pretensioner

*1: The system judges a person of adult size as an adult. When a
smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture.
*2: In the event the front passenger does not wear a seat belt.
*3: When a larger child who has outgrown a child restraint system
sits in the front passenger seat, the system may recognize him/
her as an adult depending on his/her physique or posture.
135

1-7. Safety information

*4: Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only
be installed on the front passenger seat when it is unavoidable.
(→P. 140)
*5: In case the indicator is not illuminated, consult this manual as for
installing the child restraint system properly. (→P. 144)

136

1-7. Safety information

CAUTION
■ Front passenger occupant classification system precautions
Observe the following precautions regarding front passenger occupant classification system.
Failure to do so may cause death or serious injury.
● Make sure the front passenger's seat belt tab has not been left inserted
into the buckle before someone sits in the front passenger seat.
● Make sure the “AIR BAG OFF” indicator light is not illuminated when using
the seat belt extender for the front passenger seat. If the “AIR BAG OFF”
indicator light is illuminated, disconnect the extender tongue from the seat
belt buckle, then reconnect the seat belt. Reconnect the seat belt extender
after making sure the “AIR BAG ON” indicator light is illuminated. If you
use the seat belt extender while the “AIR BAG OFF” indicator light is illuminated, the front passenger airbag, side airbag on the front passenger side
may not activate correctly, which could cause death or serious injury in the
event of collision.
● Do not apply a heavy load to the front passenger seat or equipment (e.g.
seatback pocket).
● Do not put weight on the front passenger seat by putting your hands or
feet on the front passenger seat seatback from the rear passenger seat.
● Do not let a rear passenger lift the front passenger seat with their feet or
press on the seatback with their legs.
● Do not put objects under the front passenger seat.
● Do not recline the front passenger seatback so far that it touches a rear
seat. This may cause the “AIR BAG OFF” indicator light to be illuminated,
which indicates that the passenger's airbags will not deploy in the event of
a severe accident. If the seatback touches the rear seat, return the seatback to a position where it does not touch the rear seat. Keep the front
passenger seatback as upright as possible when the vehicle is moving.
Reclining the seatback excessively may lessen the effectiveness of the
seat belt system.

137

Before driving

● Wear the seat belt properly.

1-7. Safety information

CAUTION
■ Front passenger occupant classification system precautions
● If an adult sits in the front passenger seat, the “AIR BAG ON” indicator
light is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask the
passenger to sit up straight, well back in the seat, feet on the floor, and
with the seat belt worn correctly. If the “AIR BAG OFF” indicator still
remains illuminated, either ask the passenger to move to the rear seat, or
if that is not possible, move the front passenger seat fully rearward.
● When it is unavoidable to install the forward-facing child restraint system
on the front passenger seat, install the child restraint system on the front
passenger seat in the proper order. (→P. 144)
● Do not modify or remove the front seats.
● Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the
detection system. In this case, contact your Toyota dealer immediately.
● Child restraint systems installed on the rear seat should not contact the
front seatbacks.
● Do not use a seat accessory, such as a cushion or seat cover, that covers
the seat cushion surface.
● Do not modify or replace the upholstery of the front seat.

138

1-7. Safety information

Child restraint systems
A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/shoulder
belt.
The laws of all 50 states of the U.S.A. and Canada now require the
use of child restraint systems.

Studies have shown that installing a child restraint on a rear seat is
much safer than installing one to the front passenger seat.
● Choose a child restraint system that suits your vehicle and is
appropriate to the age and size of the child.
● For installation details, follow the instructions provided with the
child restraint system.
General installation instructions are provided in this manual.
(→P. 144)

139

Before driving

Points to remember

1-7. Safety information

Types of child restraints
Child restraint systems are classified into the following 3 types
according to the age and size of the child.
Rear facing ⎯ Infant seat/convertible seat

Forward facing ⎯ Convertible seat

Booster seat

140

1-7. Safety information

■ Selecting an appropriate child restraint system
● Use a child restraint system appropriate for the child until the child
becomes large enough to properly wear the vehicle’s seat belt.
● If a child is too large for a child restraint system, sit the child on a rear
seat and use the vehicle's seat belt. (→P. 85)

■ Child restraint precautions
● For effective protection in automobile accidents and sudden stops, a child
must be properly restrained, using a seat belt or child restraint system
depending on the age and size of the child. Holding a child in your arms is
not a substitute for a child restraint system. In an accident, the child can be
crushed against the windshield, or between you and the vehicle's interior.
● Toyota strongly urges the use of a proper child restraint system that conforms to the size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat
than in the front seat.
● Never install a rear-facing child restraint system on the front passenger
seat even if “AIR BAG OFF” indicator light is illuminated.
In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.

141

Before driving

CAUTION

1-7. Safety information

CAUTION
■ Child restraint precautions
● A forward-facing child restraint system may be allowed to be installed on
the front passenger seat only when it is unavoidable. A child restraint system that requires a top tether strap should not be used in the front passenger seat since there is no top tether strap anchor for the front passenger
seat. Adjust the seatback as uprights as possible and always move the
seat as far back as possible even if the “AIR BAG OFF” indicator light is
illuminated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously
injured.
● Do not use the seat belt extender when installing a child restraint system
on the front or rear passenger seat. If installing a child restraint system
with the seat belt extender connected to the seat belt, the seat belt will not
securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of a sudden stop,
sudden swerve or accident.
● Do not allow the child to lean his/her head or any part of his/her body
against the door or the area of the seat, front and rear pillars or roof side
rail from which the side airbags or curtain shield airbags deploy even if the
child is seated in the child restraint system. It is dangerous if the side airbags and curtain shield airbags inflate, and the impact could cause death
or serious injury to the child.
● Make sure you have complied with all installation instructions provided by
the child restraint manufacturer and that the system is properly secured. If
it is not secured properly, it may cause death or serious injury to the child
in the event of a sudden stop, sudden swerve or accident.
■ Child restraint lock function belt precaution
Do not allow children to play with the child restraint lock function belt. If the
belt becomes twisted around a child’s neck, it will not be possible to pull the
belt out leading to choking or other serious injuries that could result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used
to cut the belt.

142

1-7. Safety information

CAUTION
■ When the child restraint system is not in use
● Keep the child restraint system properly secured on the seat even if it is
not in use.
Do not store the restraint unsecured in the passenger compartment.

143

Before driving

● If it is necessary to detach the child restraint system, remove it from the
vehicle or store it securely in the luggage compartment. This will prevent it
from injuring passengers in the event of a sudden stop, sudden swerve or
accident.

1-7. Safety information

Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly
secure child restraints to the rear seats using the LATCH anchors or
a seat belt. Attach the top tether strap when installing a child
restraint.
The lap/shoulder belt can be used if your child restraint system is
not compatible with the LATCH (Lower Anchors and Tethers for Children) system.

Second seat: Child restraint
LATCH anchors
LATCH anchors are provided
for the rear outer seats. (Buttons displaying the location of
the anchors are attached to the
seats.)

Seat belts equipped with a
child restraint locking mechanism (ALR/ELR belts except
driver’s seat belt)

144

1-7. Safety information

Second seat: Anchor brackets
(for top tether strap)
Anchor brackets are provided
for the second seats.

Before driving
145

1-7. Safety information

Installation with LATCH system
STEP 1

Fold the seatback while pulling
the lever. Return the seatback
and secure it at the 1st lock position (most upright position).
Adjust the seatback to the 3rd
lock position. (→P. 74)
1st lock position
3rd lock position

Type A
STEP 2

Latch the hooks of the lower
straps onto the LATCH anchors.
The bars are installed in the
clearance between the seat cushion and seatback.
If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchors.

For owners in Canada:
The symbol on a child restraint
system indicates the presence of
a lower connector system.
Canada only

146

1-7. Safety information

Type B
STEP 2

Latch the buckles
LATCH anchors.

onto

the

The bars are installed in the
clearance between the seat cushion and seatback.

For owners in Canada:
The symbol on a child restraint
system indicates the presence of
a lower connector system.
Canada only

147

Before driving

If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchors.

1-7. Safety information

Installing child restraints using a seat belt (child restraint lock function belt)
■ Rear facing ⎯ Infant seat/convertible seat
STEP 1

Place the child seat on the rear
seat facing the rear of the vehicle.

STEP 2

Run the seat belt through the
child seat and insert the plate
into the buckle. Make sure that
the belt is not twisted.

STEP 3

Fully extend the shoulder belt
and then allow it to retract
slightly in order to activate the
ALR lock mode.
Lock mode allows the seat belt to
retract only.

148

1-7. Safety information

STEP 4

While pushing the child seat
down into the rear seat, allow the
shoulder belt to retract until the
child seat is securely in place.
1

■ Forward facing ⎯ Convertible seat
STEP 1

Place the child seat on the seat
facing the front of the vehicle.

STEP 2

Run the seat belt through the
child seat and insert the plate
into the buckle. Make sure that
the belt is not twisted.

STEP 3

Fully extend the shoulder strap
and then allow it to retract
slightly into the ALR lock mode.
Lock mode allows the seat belt to
retract only.

149

Before driving

After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.

1-7. Safety information

While pushing the child seat into
the rear seat, allow the shoulder
belt to retract until the child seat
is securely in place.

STEP 4

After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
STEP 5

If the child restraint has a top tether strap, the top tether strap
should be latched onto the top tether strap anchors.

■ Booster seat
STEP 1

Place the booster seat on the
seat facing the front of the vehicle.

STEP 2

Sit the child in the booster seat.
Fit the seat belt to the booster
seat according to the manufacturer's instructions and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Check that the shoulder belt is
correctly positioned over the
child's shoulder, and that the lap
belt is as low as possible.
(→P. 85)

150

1-7. Safety information

Removing a child restraint installed with a seat belt
Push the buckle release button
and fully retract the seat belt.

Before driving

Child restraint systems with a top tether strap (second seat only)
STEP 1

Secure the child restraint using
the seat belt or lower anchors,
and adjust the head restraint to
the upmost position.

151

1-7. Safety information

STEP 2

Outer seat: Open the anchor
bracket cover, latch the hook
onto the anchor bracket and
tighten the top tether strap.
Center seat: Latch the hook onto
the anchor bracket and tighten
the top tether strap.
Make sure the top tether strap is
securely latched.

STEP 3

Adjust the head restraint to the
downmost position.

■ Laws and regulations pertaining to anchorages
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be used.
This vehicle is designed to conform to the SAE J1819.

152

1-7. Safety information

CAUTION
■ When installing a booster seat
Do not fully extend the shoulder belt to prevent the belt from going to ALR
lock mode. (→P. 86)

■ When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of sudden
braking, sudden swerving or an accident.
● If the driver's seat interferes with the
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the righthand rear seat.
● Adjust the front passenger seat or second seats so that it does not interfere
with the child restraint system.
● Only put a forward-facing or booster
child seat on the front seat when
unavoidable. When installing a forwardfacing or booster child seat on the front
passenger seat, move the seat as far
back as possible even if “AIR BAG
OFF” indicator light is illuminated. Failing to do so may result in death or serious injury if the airbags deploy (inflate).

153

Before driving

ALR mode causes the belt to tighten only which could cause injury or discomfort to the child.

1-7. Safety information

CAUTION
■ When installing a child restraint system
● When installing a child restraint system in the rear center seat, adjust both
seat cushions to the same position and align seatbacks at the same angle.
The seatbacks must be adjusted to the same angle. Otherwise, the child
restraint system cannot be securely restrained and this may cause death
or serious injuries in the event of sudden braking, sudden swerving or an
accident.
● When using the LATCH anchors for a child restraint system, move the seat
as far back as possible (second seat only), with the seatback close to the
child restraint system.
● When a booster seat is installed, always ensure that the shoulder belt is
positioned across the center of the child's shoulder. The belt should be
kept away from the child's neck, but not so that it could fall off the child's
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
● Ensure that the belt and tab are securely locked and the seat belt is not
twisted.
● Push and pull the child seat from side to side and forward to be sure it is
secure.
● After securing a child restraint system, never adjust the seat.
● Follow all installation instructions provided by the child restraint system
manufacturer.
■ Do not use a seat belt extender
If a seat belt extender is used when installing a child restraint system, the
seat belt will not securely hold the child restraint system, which could cause
death or serious injury to the child or other passengers in the event of sudden braking, sudden swerving or an accident.
■ To correctly attach a child restraint system to the anchors
When using the LATCH anchors, be sure that there are no foreign objects
around the anchors and that the seat belt is not caught behind the child
restraint. Make sure the child restraint system is securely attached, or it may
cause death or serious injury to the child or other passengers in the event of
a sudden stop, sudden swerve or accident.

154

2-1. Driving procedures

Driving the vehicle
The following procedures should be observed to ensure safe driving.

■ Starting the engine
→P. 166, 170
■ Driving
STEP 1

With the brake pedal depressed, shift the shift lever to D.
(→P. 173)

STEP 2

Release the parking brake.

STEP 3

Gradually release the brake pedal and gently depress the
accelerator pedal to accelerate the vehicle.

(→P. 179)

■ Stopping
STEP 1

With the shift lever in D, depress the brake pedal.

STEP 2

If necessary, set the parking brake.
When the vehicle is stopped for an extended period of time, shift
the shift lever to P or N.
(→P. 173)

■ Parking the vehicle
STEP 1

With the shift lever in D, depress the brake pedal.

STEP 2

Set the parking brake.

(→P. 179)

STEP 3

Shift the shift lever to P.

(→P. 173)

When parking on a hill, if necessary, block the wheels.
STEP 4

Vehicles without smart key system:
Turn the engine switch to the “LOCK” position to stop the
engine.
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch OFF to stop the
engine.

STEP 5

156

Lock the door, making sure that you have the key on your
person.

2-1. Driving procedures

Starting on a steep uphill
STEP 1

Firmly set the parking brake and shift the shift lever to D.

STEP 2

Gently depress the accelerator pedal.

STEP 3

Release the parking brake.

■ Driving in the rain
● Drive carefully when it is raining, because visibility will be reduced, the
windows may become fogged-up, and the road will be slippery.

● Refrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road
surface, preventing the steering and brakes from operating properly.
■ Breaking in your new Toyota
To extend the life of the vehicle, observing the following precautions is recommended:
● For the first 186 miles (300 km):
Avoid sudden stops.
● For the first 500 miles (800 km):
Do not tow a trailer.
● For the first 621 miles (1000 km):
•
•
•
•

Do not drive at extremely high speeds.
Avoid sudden acceleration.
Do not drive continuously in the low gears.
Do not drive at a constant speed for extended periods.

157

When driving

● Drive carefully when it starts to rain, because the road surface will be
especially slippery.

2-1. Driving procedures

■ Drum-in-disc type parking brake system
Your vehicle has a drum-in-disc type parking brake system.
This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drums are replaced.
Have your Toyota dealer perform the bedding-down.
■ Operating your vehicle in a foreign country
Comply with the relevant vehicle registration laws and confirm the availability
of the correct fuel. (→P. 555)

CAUTION
■ When starting the vehicle
Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping.
■ When driving the vehicle
● Do not drive if you are unfamiliar with the location of the brake and accelerator pedals to avoid depressing the wrong pedal.
• Accidentally depressing the accelerator pedal instead of the brake
pedal will result in sudden acceleration that may lead to an accident
that could result in death or serious injury.
• When backing up, you may twist your body around, leading to a difficulty in operating the pedals. Make sure to operate the pedals properly.
• Make sure to keep a correct driving posture even when moving the
vehicle only slightly, allowing you to depress the brake and accelerator
pedals properly.
• Depress the brake pedal using your right foot. Depressing the brake
pedal using your left foot may delay response in an emergency, resulting in an accident.
● Do not drive the vehicle over or stop the vehicle near flammable materials.
The exhaust system and exhaust gases can be extremely hot. This may
cause a fire if there is any flammable material nearby.

158

2-1. Driving procedures

CAUTION
● Do not let the vehicle roll backwards while the shift lever is in a driving
position, or roll forward while the shift lever is in R.
Doing so may cause the engine to stall or lead to poor brake and steering
performance, resulting in an accident or damage to the vehicle.
● If the smell of exhaust is noticed inside the vehicle, open the windows and
check that the back door is closed. Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a
serious health hazard. Have the vehicle inspected by your Toyota dealer
immediately.

● Do not shift the shift lever to N while the vehicle is moving.
Doing so may cause the engine brake to not operate properly and lead to
an accident.
● Do not turn the engine off while driving.
The power steering and brake booster systems will not operate properly if
the engine is not running.
● Use engine braking (downshift) to maintain a safe speed when driving
down a steep hill.
Using the brakes continuously may cause the brakes to overheat and lose
effectiveness. (→P. 174)
● When stopped on an inclined surface, use the brake pedal and parking
brake to prevent the vehicle from rolling backward or forward and causing
an accident.
● Do not adjust the position of the steering wheel, the seat, or the inside or
outside rear view mirrors while driving.
Doing so may result in a loss of vehicle control that can cause accidents
that may result in death or serious injury.
● Always check that all passengers' arms, heads or other parts of their bodies are not outside the vehicle, as this may result in death or serious injury.
● Do not drive the vehicle off-road.
This is not a 4WD vehicle designed for real off-road driving. Proceed with
all due caution if it becomes unavoidable to drive off-road.
159

When driving

● Do not under any circumstances shift the shift lever to P, R or N while the
vehicle is moving.
Doing so can cause significant damage to the transmission system and
may result in a loss of vehicle control.

2-1. Driving procedures

CAUTION
● 4WD models: Do not drive across a river or through other bodies of water.
This may cause electric/electronic components to short circuit, damage
the engine or cause other serious damage to the vehicle.
● Do not drive in excess of the speed limit. Even if the legal speed limit permits it, do not drive over 85 mph (140 km/h) unless your vehicle has highspeed capability tires. Driving over 85 mph (140 km/h) may result in tire
failure, loss of control and possible injury. Be sure to consult a tire dealer
to determine whether the tires on your vehicle are high-speed capability
tires or not before driving at such speeds.
■ When driving on slippery road surfaces
● Sudden braking, acceleration and steering may cause tire slippage and
reduce your ability to control the vehicle, resulting in an accident.
● Sudden changes in engine speed, such as engine braking caused by upshifting or down-shifting, may cause the vehicle to skid, resulting in an
accident.
● After driving through a puddle, lightly depress the brake pedal to make
sure that the brakes are functioning properly. Wet brake pads may prevent
the brakes from functioning properly. If the brakes on only one side are wet
and not functioning properly, steering control may be affected, resulting in
an accident.
■ When shifting the shift lever
Be careful not to shift the shift lever with the accelerator pedal depressed.
This may lead to unexpected rapid acceleration of the vehicle that may
cause an accident and result in death or serious injury.
■ When the vehicle is stopped
● Do not race the engine.
If the vehicle is in any gear other than P or N, the vehicle may accelerate
suddenly and unexpectedly, and may cause an accident.
● Do not leave the vehicle with the engine running for a long time.
If such a situation cannot be avoided, park the vehicle in an open space
and check that exhaust fumes do not enter the vehicle interior.

160

2-1. Driving procedures

CAUTION
● In order to prevent accidents due to the vehicle rolling away, always keep
depressing the brake pedal while the engine is running, and apply the
parking brake as necessary.
● If the vehicle is stopped on an incline, in order to prevent accidents caused
by the vehicle rolling forward or backward, always depress the brake pedal
and securely apply the parking brake as needed.

■ When the vehicle is parked
● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in
the vehicle when it is in the sun.
Doing so may result in the following.
• Gas may leak from a cigarette lighter or spray can, and may lead to a
fire.
• The temperature inside the vehicle may cause the plastic lenses and
plastic material of eye glasses to deform or crack.
• Soft drink cans may fracture, causing the contents to spray over the
interior of the vehicle, and may also cause a short circuit in the vehicle's electrical components.
● Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a
place such as the glove box or on the floor, it may be lit accidentally when
luggage is loaded or the seat is adjusted, causing a fire.
● Do not attach adhesive discs to the windshield or windows. Do not place
containers such as air fresheners on the instrument panel or dashboard.
Adhesive discs or containers may act as lenses, causing a fire in the vehicle.
● Do not leave a door or window open if the curved glass is coated with a
metallized film such as a silver-colored one. Reflected sunlight may cause
the glass to act as a lens, causing a fire.

161

When driving

● Avoid revving or racing the engine.
Running the engine at high speed while the vehicle is stopped may cause
the exhaust system to overheat, which could result in a fire if combustible
material is nearby.

2-1. Driving procedures

CAUTION
● Always apply the parking brake, shift the shift lever to P, stop the engine
and lock the vehicle.
Do not leave the vehicle unattended while the engine is running.
● Do not touch the exhaust pipe while the engine is running or immediately
after turning the engine off.
Doing so may cause burns.
● Do not leave the engine running in an area with snow build-up, or where it
is snowing. If snowbanks build up around the vehicle while the engine is
running, exhaust gases may collect and enter the vehicle. This may lead
to death or a serious health hazard.
■ Exhaust gases
Exhaust gases include harmful carbon monoxide (CO) that is colorless and
odorless. Inhaling exhaust gases may lead to death or a serious health hazard.
● If the vehicle is in a poorly ventilated area, stop the engine. In a closed
area, such as a garage, exhaust gases may collect and enter the vehicle.
This may lead to death or a serious health hazard.
● The exhaust should be checked occasionally. If there is a hole or crack
caused by corrosion, damage to a joint or abnormal exhaust noise, be
sure to have the vehicle inspected and repaired by your Toyota dealer.
Failure to do so may allow exhaust gases to enter the vehicle, resulting in
death or a serious health hazard.
■ When taking a nap in the vehicle
Always turn the engine off. Otherwise, you may accidentally move the shift
lever or depress the accelerator pedal, which could cause an accident or fire
due to engine overheating. Additionally, if the vehicle is parked in a poorly
ventilated area, exhaust gases may collect and enter the vehicle, leading to
death or a serious health hazard.

162

2-1. Driving procedures

CAUTION
■ When braking the vehicle
● When the brakes are wet, drive more cautiously.
Braking distance increases when the brakes are wet, and may cause one
side of the vehicle to brake differently than the other side. Also the parking
brake may not securely hold the vehicle.
● If the power brake assist function does not operate, do not follow other
vehicles closely and avoid downhills or sharp turns that require braking.
In this case, braking is still possible, but it will require more force on the
pedal than usual. Braking distance may also increase.

● The brake system consists of 2 individual hydraulic systems: If one of the
systems fails, the other will still operate. In this case, the brake pedal
should be depressed more firmly than usual and braking distance
becomes longer.
Do not drive your vehicle with only a single brake system. Have your
brakes fixed immediately.
■ If the vehicle becomes stuck or bogged (4WD models)
Do not spin the wheels recklessly when any of the tires is up in the air, or
stuck in sand or mud etc. This may damage the drive system components or
propel the vehicle forward (or in another direction) and cause an accident.
■ If you hear a squealing or scraping noise (brake pad wear limit indicators)
Have the brake pads checked and replaced by your Toyota dealer as soon
as possible.
Rotor damage can result if the pads are not replaced when needed.
It is dangerous to drive the vehicle when the wear limits of the brake pads
and/or those of the brake discs are exceeded.

163

When driving

● Do not pump the brake pedal if the engine stalls.
Each push on the brake pedal uses up the reserve for the power-assisted
brakes.

2-1. Driving procedures

CAUTION
■ If you get a flat tire while driving
A flat or damaged tire may cause the following situations. Hold the steering
wheel firmly and gradually press the brake pedal to slow down the vehicle.
● It may be difficult to control your vehicle.
● The vehicle will make abnormal sounds.
● The vehicle will behave abnormally.
Replace a flat tire with a new one. (→P. 525)

NOTICE
■ When driving the vehicle
● Do not depress the accelerator and brake pedals at the same time during
driving. If the brake pedal is depressed while driving with the accelerator
pedal depressed, driving torque may be restrained.
● Do not use the accelerator pedal or depress the accelerator and brake
pedals together to hold the vehicle on a hill.
■ When parking the vehicle
Always put the shift lever in P. Failure to do so may cause the vehicle to
move or the vehicle may accelerate suddenly if the accelerator pedal is accidentally depressed.
■ Avoiding damage to vehicle parts
● Do not turn the steering wheel fully in either direction and hold it there for a
long time.
Doing so may damage the power steering motor.
● When driving over bumps in the road, drive as slowly as possible to avoid
damaging the wheels, underside of the vehicle, etc.

164

2-1. Driving procedures

NOTICE
■ When encountering flooded roads
Do not drive on a road that has flooded after heavy rain etc. Doing so may
cause the following serious damage to the vehicle.
● Engine stalling
● Short in electrical components
● Engine damage caused by water immersion

In the event that you drive on a flooded road and the vehicle is flooded, be
sure to have your Toyota dealer check the following.
● Changes in quantity and quality of oil and fluid used for the engine, transaxle, transfer (4WD models), differential (4WD models), etc.
● Lubricant condition for the propeller shaft (4WD models), bearings and
suspension joints (where possible) and the function of all joints, bearings,
etc.

165

When driving

● Brake function

2-1. Driving procedures

Engine (ignition) switch (vehicles with smart key system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes “ENGINE START
STOP” switch mode.

■ Starting the engine
The engine can be started in any mode by operating the “ENGINE
START STOP” switch at the same time as depressing the brake
pedal.
STEP 1

Check that the parking brake is set.

STEP 2

Check that the shift lever is set in P.

STEP 3

Sit in the driver’s seat and firmly depress the brake pedal.
The “ENGINE START STOP” switch indicator turns green. If the
indicator does not turn green, the engine cannot be started.

STEP 4

Press the “ENGINE START
STOP” switch.
The engine can be started
from any mode.
Continue depressing the brake
pedal until the engine is completely started.
The engine will crank until it
starts or for up to 30 seconds,
whichever is less.

166

2-1. Driving procedures

■ Changing “ENGINE START STOP” switch modes
Modes can be changed by pressing the “ENGINE START STOP”
switch with the brake pedal released. (The mode changes each
time the switch is pressed.)
OFF*
The emergency flashers can
be used.

ACCESSORY mode

The “ENGINE START STOP”
switch indicator turns amber.

IGNITION ON mode
All electrical components can
be used.
The “ENGINE START STOP”
switch indicator turns amber.
*: If the shift lever is in a position
other than P when turning off
the engine, the “ENGINE
START STOP” switch will be
turned to ACCESSORY mode,
not to OFF.

167

When driving

Some electrical components
such as the audio system can
be used.

2-1. Driving procedures

■ Steering lock release
Make sure that the steering wheel lock is
released.
To release the steering wheel lock, gently
turn the wheel left or right while pressing
the “ENGINE START STOP” switch.
When the steering wheel lock is not
released, the “ENGINE START STOP”
switch indicator will flash in green.
■ If the engine does not start
The engine immobilizer system may not have been deactivated. (→P. 110)
■ When the “ENGINE START STOP” switch indicator flashes in amber
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
■ Auto power off function
If the vehicle is left in ACCESSORY mode for more than an hour with the
shift lever in P, the “ENGINE START STOP” switch will automatically turn off.
■ Key battery depletion
→P. 40
■ When the electronic key battery is discharged
→P. 474
■ Conditions affecting operation
→P. 38
■ Note for the entry function
→P. 40

168

2-1. Driving procedures

CAUTION
■ When starting the engine
Always start the engine while sitting in the driver's seat. Do not depress the
accelerator pedal while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
■ Caution while driving

■ Stopping the engine in an emergency
If you want to stop the engine in an emergency while driving the vehicle,
push and hold the “ENGINE START STOP” switch for more than 3 seconds.
However, do not touch the “ENGINE START STOP” switch while driving
except in an emergency. If the engine stops while the vehicle is being driven,
this could lead to an unexpected accident.

NOTICE
■ To prevent battery discharge
Do not leave the “ENGINE START STOP” switch in ACCESSORY or IGNITION ON mode for long periods without the engine running.
■ When starting the engine
● Do not race a cold engine.
● If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.

169

When driving

If the vehicle begins to slide due to engine failure or other circumstances, do
not lock or open the doors until the vehicle reaches a safe and complete
stop. Activation of the steering lock in this circumstance may lead to an accident, resulting in death or serious injury.

2-1. Driving procedures

Engine (ignition) switch (vehicles without smart key system)
■ Starting the engine
STEP 1

Check that the parking brake is set.

STEP 2

Check that the shift lever is set in P.

STEP 3

Sit in the driver’s seat and firmly depress the brake pedal.

STEP 4

Turn the engine switch to the “START” position and start
the engine.

■ Changing engine switch position
“LOCK”
The steering wheel is locked
and the key can be removed.
(The key can be removed only
when the shift lever is in P.)

“ACC”
Some electrical components
such as the audio system can
be used.

“ON”
All electrical components can
be used.

“START”
For starting the engine.

170

2-1. Driving procedures

■ Turning the key from “ACC” to “LOCK”
STEP 1 Shift the shift lever to P.

(→P. 173)
STEP 2 Push in the key and turn to the

“LOCK” position.

■ Steering lock release

■ If the engine does not start (vehicles with engine immobilizer system)
The engine immobilizer system may not have been deactivated. (→P. 110)
■ Key reminder function
A buzzer sounds if the driver’s door is opened while the key is in the “LOCK”
or “ACC” position to remind you to remove the key.

CAUTION
■ When starting the engine
Always start the engine while sitting in the driver's seat. Do not depress the
accelerator while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
■ Caution when driving
Do not turn the engine switch to the “LOCK” position while driving. If, in an
emergency, you must turn the engine off while the vehicle is moving, turn the
key only to the “ACC” position.

171

When driving

When starting the engine, the engine
switch may seem stuck in the “LOCK”
position. To free it, turn the key while turning the steering wheel slightly in either
direction.

2-1. Driving procedures

NOTICE
■ To prevent battery discharge
Do not leave the key in the “ACC” or “ON” position for long periods if the
engine is not running.
■ When starting the engine
● Do not crank for more than 30 seconds at a time. This may overheat the
starter and wiring systems.
● Do not race a cold engine.
● If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.

172

2-1. Driving procedures

Automatic transmission
Select a shift position appropriate for the driving conditions.

■ Shifting the shift lever

When driving

Vehicles without smart key system
While the engine switch is in the “ON” position, depress the
brake pedal and move the shift lever.
Vehicles with smart key system
While the “ENGINE START STOP” switch is in IGNITION
ON mode, depress the brake pedal and move the shift
lever.

173

2-1. Driving procedures

■ Shift position uses
Shift position

Function

Parking the vehicle or starting the engine

Reversing

Neutral

Normal driving*1

S mode driving (→P. 175)*2

*1:

Shifting to the D position allows the system to select a gear suitable
for the driving conditions. Setting the shift lever to the D position is
recommended for normal driving.

*2:

Selecting shift ranges using S mode restricts the upper limit of the
possible gear ranges, controls engine braking forces, and prevents
unnecessary upshifting.

■ Selecting snow mode
Use snow mode for accelerating and driving on slippery road
surfaces, such as on snow.
Press the “SNOW” switch.
The indicator will come on.
Press the switch once more to
cancel snow mode.

174

2-1. Driving procedures

Changing shift ranges in S mode
Shift the shift lever to the S position and operate the shift lever.
Upshifting
Downshifting

However, the initial shift range may be set to “3” if AI-SHIFT has operated while the shift lever was in the D position. (→P. 177)
3.5 L V6 (2GR-FE) engine
The initial shift range in S mode is set automatically to “4”.
However, the initial shift range may be set to “3” if AI-SHIFT has operated while the shift lever was in the D position. (→P. 177)

175

When driving

2.7 L 4-cylinder (1AR-FE) engine
The initial shift range in S mode is set automatically to “5” or “4”
according to the vehicle speed.

2-1. Driving procedures

■ Shift ranges and their functions
Function
Shift range

2.7 L 4-cylinder (1AR-FE)
engine

3.5 L V6 (2GR-FE) engine

Automatically selecting
gears between 1 and 6
according to vehicle speed
and driving conditions.

⎯

Automatically selecting gears between 1 and 5 according
to vehicle speed and driving conditions.

Automatically selecting gears between 1 and 4 according
to vehicle speed and driving conditions.

Automatically selecting gears between 1 and 3 according
to vehicle speed and driving conditions.

Automatically selecting gears between 1 and 2 according
to vehicle speed and driving conditions.

Setting the gear at 1.

A lower shift range will provide greater engine braking forces than a higher
shift range, and the engine speed will also increase.
■ When driving with the cruise control system
2.7 L 4-cylinder (1AR-FE) engine
Engine braking will not operate in S mode, even when downshifting from “6”
to “5” or “5” to “4”. (→P. 204)
3.5 L V6 (2GR-FE) engine
Engine braking will not operate in S mode, even when downshifting from “5”
to “4”. (→P. 204)
■ Snow mode automatic deactivation
Snow mode is automatically deactivated if the engine is turned off after driving in snow mode.

176

2-1. Driving procedures

■ If the shift lever cannot be shifted from P
→P. 536
■ If the S indicator does not come on even after shifting the shift lever to
S
This may indicate a malfunction in the automatic transmission system. Have
the vehicle inspected by your Toyota dealer immediately.
(In this situation, the vehicle will operate as if the shift lever is in D.)
■ Downshift restriction warning buzzer (S mode)

■ S mode
● 2.7L 4-cylinder (1AR-FE) engine: when the shift range is “5” or lower,
holding the shift lever toward “+” sets the shift range to “6”.
● 3.5L V6 (2GR-FE) engine: when the shift range is “4” or lower, holding
the shift lever toward “+” sets the shift range to “5”.
● To prevent excessive engine speed, a function was adopted that automatically selects a higher shift range before engine speed becomes too
high.
● To protect the automatic transmission, a function is adopted that automatically selects a higher shift range when the fluid temperature is high.
■ AI-SHIFT
AI-SHIFT automatically selects the suitable gear according to driver performance and driving conditions.
AI-SHIFT automatically operates when the shift lever is in the D position.
(Shifting the shift lever to the S mode driving position cancels the function.)

177

When driving

To help ensure safety and driving performance, downshifting operation may
sometimes be restricted. In some circumstances, downshifting may not be
possible even when the shift lever is operated. (A buzzer will sound twice.)

2-1. Driving procedures

Turn signal lever
Right turn
Left turn
Move and hold the lever
partway to signal a lane
change.
The right hand signal will flash
until you release the lever.

Move and hold the lever
partway to signal a lane
change.
The left hand signal will flash
until you release the lever.

■ Turn signals can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.

178

2-1. Driving procedures

Parking brake
Sets the parking brake*
U.S.A. Canada

(Depressing the pedal again
releases the parking brake.)
*: Fully depress the parking
brake pedal with your left foot
while depressing the brake
pedal with your right foot.
2

See “Winter driving tips” for parking brake usage in winter time. (→P. 231)

NOTICE
■ Before driving
Fully release the parking brake.
Driving the vehicle with the parking brake set will lead to brake components
overheating, which may affect braking performance and increase brake
wear.

179

When driving

■ Usage in winter time

2-1. Driving procedures

Horn
To sound the horn, press on or
close to the
mark.

■ After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
The horn may not sound if the steering wheel is not securely locked.
(→P. 91)

180

2-2. Instrument cluster

Gauges and meters

Vehicles with smart key system
The following gauges and meters illuminate when the “ENGINE
START STOP” switch is in IGNITION ON mode.
Tachometer
Displays the engine speed in revolutions per minute.

Engine coolant temperature gauge
Displays the engine coolant temperature.

Fuel gauge
Displays the quantity of fuel remaining in the tank.

Speedometer
Displays the vehicle speed.

Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed.

181

When driving

Vehicles without smart key system
The following gauges and meters illuminate when the engine
switch is in the “ON” position.

2-2. Instrument cluster

Odometer/Trip meter
Odometer
Displays the total distance the vehicle has been driven.
Trip meter
Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to
record and display different distances independently.

Instrument panel light control
The brightness of the instrument panel lights can be adjusted.
Brighter
Darker
When the headlight switch is
turned on, the brightness will
be reduced slightly unless the
control dial is turned fully up.

NOTICE
■ To prevent damage to the engine and its components
● Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the temperature gauge is in the red
zone (H). In this case, immediately stop the vehicle in a safe place, and
check the engine after it has cooled completely. (→P. 544)

182

2-2. Instrument cluster

Indicators and warning lights
The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems.

Instrument cluster

When driving

Center panel (vehicles without navigation system)

183

2-2. Instrument cluster

Center panel (vehicles with navigation system)

■ Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(→P. 178)

Headlight indicator
(→P. 196)
(U.S.A.)

Headlight high beam
indicator (→P. 198)

Tail light indicator
(→P. 196)
(Canada)

*1
(4WD models)

*1, 2

184

Downhill assist control
system indicator
(→P. 218)
Slip indicator
(→P. 212)

Front fog light indicator
(→P. 200)
(if equipped)

“SNOW” indicator
(→P. 174)

2-2. Instrument cluster

*1
Shift position and shift range indicators (→P. 173)
*1 Enhanced VSC off indicator
(→P. 213)

Cruise control indicator
(→P. 204)
“TRAC OFF” indicator
(→P. 212)

position (vehicles without smart key system) or the “ENGINE
START STOP” switch is turned to IGNITION ON mode (vehicles
with smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few
seconds. There may be a malfunction in a system if a light does not
come on, or if the lights do not turn off. Have the vehicle inspected
by your Toyota dealer for details.

*2: The light flashes to indicate that the system is operating.
■ Warning lights
Warning lights inform the driver of malfunctions in any of the
vehicle’s systems. (→P. 508)

(Canada)

*1
(U.S.A.)

*1, 2

(U.S.A.)

*1, 2

*1
(Canada)

*1
(U.S.A.)

*1
(Canada)

(U.S.A.)

(if equipped)

185

When driving

*1: These lights turn on when the engine switch is turned to the “ON”

(if equipped)

Engine immobilizer/
alarm indicator
(→P. 110, 113)

(if equipped)

SRS airbag on-off indicator (→P. 132)

2-2. Instrument cluster

*1: These lights turn on when the engine switch is turned to the “ON”
position (vehicles without smart key system) or the “ENGINE
START STOP” switch is turned to IGNITION ON mode (vehicles
with smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few
seconds. There may be a malfunction in a system if a light does not
come on, or if the lights do not turn off. Have the vehicle inspected
by your Toyota dealer for details.

*2: Vehicles without multi-information display
*3: Vehicles with multi-information display
*4: Vehicles without navigation system
*5: Vehicles with navigation system
*6: The light flashes to indicate a malfunction.

CAUTION
■ If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS airbag warning light
not come on when you start the engine, this could mean that these systems
are not available to help protect you in an accident, which could result in
death or serious injury. Have the vehicle inspected by your Toyota dealer
immediately if this occurs.

186

2-2. Instrument cluster

Multi-information display∗
The multi-information display presents the driver with a variety of
driving-related data, including the current outside temperature and
clock.

● Outside temperature
Indicates the outside temperature.

● Clock

(→ P. 190)

Indicates and sets the time.

● Trip information

(→P. 188)

Displays cruising range, fuel
consumption and other cruising-related information.

● Automatic air conditioning
system display (if equipped)
(→P. 255)
Automatically displayed when
the automatic air conditioning
is turned on.

● Rear view monitor
(→P. 207)
Automatically displayed when
the shift lever is moved into the
R position.

∗: If equipped
187

When driving

The temperature range that
can be displayed is from -40°F
(-40°C) to 122°F (50°C).

2-2. Instrument cluster

● Warning messages
(→P. 519)
Automatically displayed when
a malfunction occurs in one of
the vehicle’s systems.

Trip information
Push the “DISP” button to display trip information.
Display items can be switched
by pressing the “DISP” button.

■ Average fuel consumption after refueling
Displays the average fuel consumption since the vehicle was last
refueled.
■ Instantaneous fuel consumption
Displays the instantaneous fuel consumption.
■ Cruising range
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may
not be updated.

■ Driving distance
Displays the driving distance since the engine was started.
188

2-2. Instrument cluster

■ Average fuel consumption
Displays the average fuel consumption since the function was
reset.
This function can be reset by pressing the “DISP” button for longer than
one second when the average fuel consumption is displayed.
When the function is reset, the previous five average fuel consumption
values will automatically be displayed for six seconds.

■ Average fuel consumption history

Displays the previous five average fuel consumption values.

STEP 1

Display the set up screen on the
multi-information display when
the vehicle is stopped.
Press and hold the “DISP” button
to display the set up screen.

STEP 2

Select the desired item on the
menu screen.
Press and hold the “DISP” button
to enter the setting mode.

189

When driving

Setting up the displays

2-2. Instrument cluster

■ Setting the clock
STEP 1

Select “CLOCK” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the hours.
After adjusting the hours, wait 5
seconds to allow the hours to be
automatically input.

STEP 3

Press the “DISP” button to adjust
the minutes.
After adjusting the minutes, wait 5
seconds to allow the minutes to
be automatically input.

190

2-2. Instrument cluster

■ Setting the display
STEP 1

Select “DISPLAY” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Select the desired item on the
menu screen.
Press and hold the “DISP” button
to enter the setting mode.
2

STEP 1

Select “DAY MODE” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to select “ON” or “OFF”.
After setting day mode, wait 5 seconds to allow the mode to be automatically input.

● Setting the background color
STEP 1

Select “BACKGROUND COLOR” on the menu screen. Press
and hold the “DISP” button until the display changes.

STEP 2

Press the “DISP” button to select “BLACK” or “BLUE”.
After selecting a background color, wait 5 seconds to allow the color
to be automatically input.

191

When driving

● Setting day mode

2-2. Instrument cluster

● Setting the brightness
STEP 1

Select “BRIGHTNESS” on the menu screen. Press and hold
the “DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the brightness.
+: Brighter
-: Darker
After adjusting the brightness,
wait 5 seconds to allow the brightness to be automatically input.

● Setting the contrast
STEP 1

Select “CONTRAST” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the contrast.
+: Strengthen
-: Weaken
After adjusting the contrast, wait 5
seconds to allow the contrast to
be automatically input.

● Returning to the previous screen
Select “RETURN” on the menu screen. Press and hold the “DISP”
button until the display changes.

192

2-2. Instrument cluster

Setting up the rear view monitor display
Display the set up screen on the
multi-information display when
the vehicle is stopped and the
rear view monitor is turned on.

STEP 1

Press and hold the “DISP” button
to display the set up screen.

Press and hold the “DISP” button
to enter the adjustment mode.

■ Setting the brightness
STEP 1

Select “BRIGHTNESS” on the menu screen. Press and hold
the “DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the brightness.
+: Brighter
-: Darker
After adjusting the brightness,
wait 5 seconds to allow the brightness to be automatically input.

193

When driving

Select the desired item on the
menu screen.

STEP 2

2-2. Instrument cluster

■ Setting the contrast
STEP 1

Select “CONTRAST” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the contrast.
+: Strengthen
-: Weaken
After adjusting the contrast, wait 5
seconds to allow the contrast to
be automatically input.

■ Setting the color
STEP 1

Select “COLOR” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the color.
G: Green
R: Red
After selecting a color, wait 5 seconds to allow the color to be automatically input.

■ Setting the tone
STEP 1

Select “TONE” on the menu screen. Press and hold the
“DISP” button until the display changes.

STEP 2

Press the “DISP” button to adjust
the tone.
+: Brighter
-: Darker
After adjusting the tone, wait 5
seconds to allow the tone to be
automatically input.

194

2-2. Instrument cluster

■ Returning to the previous screen
Select “RETURN” on the menu screen. Press and hold the “DISP”
button until the display changes.
■ System check display
Vehicles without smart key system
After the engine switch is turned to the “ON” position, “SYSTEM CHECK” is
displayed while system operation is checked. When the system check is
complete, the normal screen will return.

■ Liquid crystal display
Small bright spots or dots may appear on the liquid crystal display. This is a
particular characteristic of liquid crystal displays and does not indicate a malfunction. No action is required.
■ Outside temperature display
When stopped, or driving at low speeds (less than 12 mph [20 km/h]), the
correct outside temperature may not be displayed, or the display may take
longer than normal to change.
■ Customization that can be configured at Toyota dealer
Setting of language selection can be changed.
(Customizable features →P. 582)

NOTICE
■ The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

195

When driving

Vehicles with smart key system
After the “ENGINE START STOP” switch is turned to IGNITION ON mode,
“SYSTEM CHECK” is displayed while system operation is checked. When
the system check is complete, the normal screen will return.

2-3. Operating the lights and wipers

Headlight switch
The headlights can be operated manually or automatically.

Type A
The daytime running
lights turn on.
The side marker, parking, tail, license plate,
daytime running lights
and instrument panel
lights turn on.

U.S.A. Canada

The headlights and all
lights listed above
(except daytime running lights) turn on.
(if equipped)

196

The headlights and
parking lights turn on
and off automatically.
(Vehicles
without
smart key system:
When the engine
switch is turned to the
“ON” position.
Vehicles with smart
key system:
When the “ENGINE
START STOP” switch
is turned to IGNITION
ON mode.)

2-3. Operating the lights and wipers

Type B

The side marker, parking, tail, license plate
and daytime running
lights and instrument
panel lights turn on.
The headlights and all
lights listed above
(except daytime running lights) turn on.
The daytime running
lights turn off.

197

When driving

2-3. Operating the lights and wipers

Turning on the high beam headlights
With the headlights on, push
the lever forward to turn on the
high beams.
Pull the lever back to the center
position to turn the high beams
off.

Pull the lever toward you to
turn on the high beams.
Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.
■ Daytime running light system (if equipped)
● To help make your vehicle visible to other drivers, the headlights turn on
automatically (at a reduced intensity) whenever the engine is started and
the parking brake is released. Daytime running lights are not designed for
use at night.
U.S.A.: Daytime running lights can be turned off by operating the switch.
● The daytime running light system helps to offer great durability and consumes less electricity, so it can help enhance fuel economy.
■ Headlight control sensor (if equipped)
The sensor may not function properly if
an object is placed on the sensor, or anything that blocks the sensor is affixed to
the windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight system to malfunction.

198

2-3. Operating the lights and wipers

■ Automatic light off system
Vehicles without smart key system
● When the headlights come on: The headlights and tail lights turn off 30
seconds after a door is opened and closed if the engine switch is turned
to the “ACC” or “LOCK” position. (The lights turn off immediately if
on the wireless remote control is pressed after all the doors are
locked.)
● When only the tail lights come on: The tail lights turn off automatically if
the engine switch is turned to the “ACC” or “LOCK” position and the
driver’s door is opened.

turn the light switch off and then back to

Vehicles with smart key system
● When the headlights come on: The headlights and tail lights turn off 30
seconds after a door is opened and closed if the “ENGINE START
STOP” switch is turned to ACCESSORY mode or turned off. (The lights
turn off immediately if

on the key is pressed after all the doors are

locked.)
● When only the tail lights come on: The tail lights turn off automatically if
the “ENGINE START STOP” switch is turned to ACCESSORY mode or
turned off and the driver’s door is opened.
To turn the lights on again, turn the “ENGINE START STOP” switch to IGNITION ON mode, or turn the light switch off and then back to

.
■ Customization that can be configured at Toyota dealer
Settings (e.g. daytime running light system) can be changed.
(Customizable features →P. 582)

NOTICE
■ To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not running.
199

When driving

To turn the lights on again, turn the engine switch to the “ON” position, or

2-3. Operating the lights and wipers

Fog light switch∗

The fog lights improve visibility in difficult driving conditions, such
as in rain or fog. They can be turned on only when the headlights are
on in low beam.

Off
Front fog lights on

∗: If equipped
200

2-3. Operating the lights and wipers

Windshield wipers and washer
Wiper intervals can be adjusted for intermittent operation.

Intermittent
windshield
wiper operation
Low speed windshield wiper
operation
High speed windshield
wiper operation

Temporary operation
When driving

Increases the intermittent
windshield wiper frequency
Decreases the intermittent
windshield wiper frequency

201

2-3. Operating the lights and wipers

Wash/wipe operation
Wipers operate automatically.

■ The windshield wipers and washer can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ If no windshield washer fluid sprays
Check that the washer nozzles are not blocked and if there is washer fluid in
the windshield washer fluid reservoir.

NOTICE
■ When the windshield is dry
Do not use the wipers, as they may damage the windshield.
■ When there is no washer fluid spray from the nozzle
Damage to the washer fluid pump may be caused if the lever is pulled
toward you and held continually.
■ When a nozzle is blocked
Do not try to clear it with a pin or other object. The nozzle will be damaged.

202

2-3. Operating the lights and wipers

Rear window wiper and washer
Intermittent window wiper
operation
Normal window wiper operation
Washer/wiper dual operation
Washer/wiper dual operation

When driving

■ The rear window wiper and washer can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.

NOTICE
■ When the rear window is dry
Do not use the wipers, as they may damage the rear window.

203

2-4. Using other driving systems

Cruise control∗

Use cruise control to maintain a set speed without using the accelerator.

Indicator
Cruise control switch

■ Set the vehicle speed
STEP 1

Press the “ON-OFF” button to
activate the cruise control.
Press the button once more to
deactivate the cruise control.

STEP 2

Accelerate or decelerate to
the desired speed and push
the lever down to set the
cruise control speed.

∗: If equipped
204

2-4. Using other driving systems

■ Adjusting the speed setting
Increase speed
Decrease speed
Hold the lever until the desired
speed setting is obtained.
Fine adjustment of the set
speed can be made by lightly
pushing the lever up or down
and releasing it.

Cancel
Push the lever towards you to
cancel cruise control.
The speed setting is also canceled when the brakes are
applied.

Resume
To resume cruise control and
return to the set speed, push
the lever up.

■ Cruise control can be set when
● 2.7 L 4-cylinder (1AR-FE) engine: The shift lever is in D, “4”, “5” or “6”
range of S.
● 3.5 L V6 (2GR-FE) engine: The shift lever is in D, “4” or “5” range of S.
● Vehicle speed is above approximately 25 mph (40 km/h).
■ Accelerating
The vehicle can be accelerated normally. After acceleration, the set speed
resumes.

205

When driving

■ Canceling and resuming regular acceleration

2-4. Using other driving systems

■ Automatic cruise control cancelation
The set speed is automatically canceled in any of the following situations.
● Actual vehicle speed falls more than approximately 10 mph (16 km/h)
below the preset vehicle speed.
At this time, the memorized set speed is not retained.
● Actual vehicle speed is below approximately 25 mph (40 km/h).
● Enhanced VSC is activated.
■ If the cruise control indicator light flashes
Turn the “ON-OFF” button off once, and then reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels
immediately after being activated, there may be a malfunction in the cruise
control system. Contact your Toyota dealer and have your Toyota inspected.

CAUTION
■ To avoid operating the cruise control by mistake
Keep the “ON-OFF” button off when not in use.
■ Situations unsuitable for cruise control
Do not use cruise control in any of the following situations.
Doing so may result in control of the vehicle being lost and could cause an
accident resulting in death or serious injury.
● In heavy traffic
● On roads with sharp bends
● On winding roads
● On slippery roads, such as those covered with rain, ice or snow
● On steep hills
Vehicle speed may exceed the set speed when driving down a steep hill.
● When towing a trailer or emergency towing

206

2-4. Using other driving systems

Rear view monitor system (vehicles with multi-information display)
Vehicles with navigation system
Refer to the “Navigation System Owner's Manual”.

Vehicles without navigation system
The rear view monitor system assists the driver by displaying an
image of the area behind the vehicle. The image is displayed in
reverse on the screen. This reversed image is a similar image to the
one on the inside rear view mirror.

If the shift lever is shifted out of
R, the screen returns to the
previous one.

207

When driving

The rear view image is displayed when the shift lever is
in the R position.

2-4. Using other driving systems

■ Displayed area
The area covered by the camera is limited. Objects that are close to either
corner of the bumper or under the
bumper cannot be seen on the screen.
The area displayed on the screen may
vary according to vehicle orientation or
road conditions.

Corners of bumper

■ Rear view monitor system camera
In the following cases, it may become
difficult to see the images on the
screen, even when the system is functioning correctly.
● The vehicle is in a dark area, such
as at night.
● The temperature near the lens is
extremely high or low.
● Water droplets are on the camera
lens or humidity is high, such as
when it rains.
● Foreign matter, such as snow or
mud, adheres to the camera lens.
● When the camera has scratches or
dirt on it.
● The sun or headlights are shining
directly into the camera lens.

208

2-4. Using other driving systems

■ Smear effect
If a bright light, such as sunlight
reflected off the vehicle body, is picked
up by the camera, a smear effect* characteristic to the camera may occur.
*: Smear effect: A phenomenon that
occurs when a bright light is picked
up by the camera; when transmitted
by the camera, the light source
appears to have a vertical streak
above and below it.

When the camera is used under fluorescent light, sodium lights, or mercury
lights etc., the lights and the illuminated areas may appear to flicker.
■ Setting the rear view monitor system display
→P. 193

CAUTION
■ When using the rear view monitor system, observe the following precautions to avoid an accident that could result in death or serious injuries.
● Never depend solely on the monitor system when reversing.
● Always check visually and with the mirrors to confirm your intended path is
clear.
● Use your own eyes to confirm the vehicle’s surroundings, as the displayed
image may become faint or dark, and moving images will be distorted, or
not entirely visible when the outside temperature is low. When backing up,
be sure to check behind and all around the vehicle visually and with the
mirrors before proceeding.
● Depicted distances between objects and flat surfaces differ from actual
distances.
● Do not use the system if the back door is open.

209

When driving

■ Flicker effect

2-4. Using other driving systems

NOTICE
■ Conditions which may affect the rear view monitor system
● If the back of the vehicle has been hit, the camera’s position and mounting
angle may have changed. Have the vehicle inspected by your Toyota
dealer.
● Rapid temperature changes, such as when hot water is poured on the
vehicle in cold weather, may cause the system to function abnormally.
● If the camera lens is dirty, it cannot transmit a clear image. Rinse with
water and wipe with a soft cloth. If extremely dirty, wash with a mild
cleanser and rinse.
● The displayed image may be darker and moving images may be slightly
distorted when the system is cold.
■ Camera precautions
● As the camera has a water proof construction, do not detach, disassemble
or modify it. This may cause incorrect operation.
● Do not subject the camera to a strong impact.
● If the camera lens becomes dirty, it cannot transmit a clear image. If water
droplets, snow, or mud adhere to the lens, rinse with water and wipe with a
soft cloth. If the lens is extremely dirty, wash it with a mild cleanser and
rinse. Do not rub hard.
● Do not allow organic solvent, car wax, window cleaner or glass coat to
adhere to the camera. If this happens, wipe it off as soon as possible.
● Do not strongly rub the camera lens. If the camera lens is scratched, it
cannot transmit a clear image.
● When washing the vehicle, do not apply intensive bursts of water to the
camera or camera area. Doing so may result in the camera malfunctioning.
● When replacing tires, please consult your Toyota dealer. If you replace the
tires, the area displayed on the screen may change.

210

2-4. Using other driving systems

Driving assist systems
To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations.
Be aware, however, that these systems are supplementary and
should not be relied upon too heavily when operating the vehicle.

■ ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the brakes are applied suddenly, or if
the brakes are applied while driving on a slippery road surface.
2

■ Brake assist

■ Enhanced VSC (Enhanced Vehicle Stability Control)
Provides cooperative control of the ABS, TRAC, VSC and EPS.
Helps to maintain directional stability when swerving on slippery road
surfaces by controlling steering performance.

■ TRAC (Traction Control)
Helps to maintain drive power and prevent the front wheels (2WD models) or four wheels (4WD models) from spinning when starting the vehicle or accelerating on slippery roads.

■ Hill-start assist control
→P. 216

■ Downhill assist control system (4WD models only)
→P. 218

■ EPS (Electric Power Steering)
Employs an electric motor to reduce the amount of effort needed to turn
the steering wheel.

211

When driving

Generates an increased level of braking force after the brake pedal is
depressed when the system detects a panic stop situation.

2-4. Using other driving systems

When the Enhanced VSC/TRAC systems are operating
If the vehicle is in danger of slipping, rolling backwards when
starting on an incline, or the front
wheels (2WD models) or four
wheels (4WD models) spin, the
indicator flashes to indicate that
the Enhanced VSC/TRAC systems have been engaged.
To disable TRAC and/or Enhanced VSC
If the vehicle gets stuck in fresh snow or mud, TRAC and Enhanced
VSC may reduce power from the engine to the wheels. You may
need to turn the system off to enable you to rock the vehicle in order
to free it.
■ Turning off TRAC
Quickly push and release the
button to turn off TRAC.
The “TRAC OFF” indicator light
should come on.
Push the button again to turn the
system back on.

212

2-4. Using other driving systems

■ Turning off TRAC and Enhanced VSC
Push and hold the button while
the vehicle is stopped to turn off
TRAC and Enhanced VSC.
The “TRAC OFF” and Enhanced
VSC off indicator light should
come on.
Push the button again to turn the
system back on.

Vehicles without smart key system
Turning the engine switch OFF after turning off the TRAC and Enhanced
VSC systems will automatically re-enable them.
Vehicles with smart key system
Turning the “ENGINE START STOP” switch OFF after turning off the
TRAC and Enhanced VSC systems will automatically re-enable them.
■ Automatic TRAC reactivation
If only the TRAC system is turned off, the TRAC system will turn on when
vehicle speed increases.
■ Automatic TRAC and Enhanced VSC reactivation
If the TRAC and Enhanced VSC systems are turned off, the systems will not
turn on even when vehicle speed increases.
■ Sounds and vibrations caused by the ABS, TRAC, Enhanced VSC and
brake assist
● A sound may be heard from the engine compartment when the engine is
started or just after the vehicle begins to move. This sound does not indicate that a malfunction has occurred in any of these systems.
● Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
•
•
•
•

Vibrations may be felt through the vehicle body and steering.
A motor sound may be heard after the vehicle comes to a stop.
The brake pedal may pulsate slightly when the ABS is activated.
The brake pedal may move down slightly after the ABS is activated.
213

When driving

■ Automatic reactivation of TRAC and Enhanced VSC

2-4. Using other driving systems

■ EPS operation sound
When the steering wheel operates, a motor sound (whirring sound) may be
heard.
This does not indicate a malfunction.
■ Reduced effectiveness of EPS
The effectiveness of EPS is reduced to prevent the system from overheating
when there is frequent steering input over an extended period of time. The
steering wheel may feel heavy as a result. Should this occur, refrain from
excessive steering input or stop the vehicle and turn the engine off. The system should return to normal within 10 minutes.
■ If the slip indicator comes on...
It may indicate a malfunction in the Enhanced VSC and TRAC. Contact your
Toyota dealer.

CAUTION
■ The ABS does not operate effectively when
● Tires with inadequate gripping ability are used (such as excessively worn
tires on a snow covered road).
● The vehicle hydroplanes while driving at high speed on wet or slick road.
■ Stopping distance when the ABS is operating on the wet or slick roads
The ABS is not designed to shorten the vehicle's stopping distance. Always
maintain a safe distance from the vehicle in front of you in the following situations.
● When driving on dirt, gravel or snow-covered roads
● When driving with tire chains
● When driving over bumps in the road
● When driving over roads with potholes or uneven roads

214

2-4. Using other driving systems

CAUTION
■ TRAC may not operate effectively when
Directional control and power may not be achievable while driving on slippery road surfaces even if the TRAC system is operating.
Do not drive the vehicle in conditions where stability and power may be lost.
■ When the Enhanced VSC is activated
The slip indicator light flashes. Always drive carefully. Reckless driving may
cause an accident. Exercise particular care when the indicator light flashes.

■ When TRAC and Enhanced VSC are off

■ Replacing tires
Make sure that all tires are of the same size, brand, tread pattern and total
load capacity. In addition, make sure that the tires are inflated to the appropriate tire pressure level.
The ABS and Enhanced VSC systems will not function correctly if different
tires are fitted on the vehicle.
Contact your Toyota dealer for further information when replacing tires or
wheels.
■ Handling of tires and suspension
Using tires with any kind of problem or modifying the suspension will affect
the driving assist systems, and may cause the system to malfunction.

215

When driving

Be especially careful and drive at a speed appropriate to the road conditions. As these are systems to help ensure vehicle stability and driving force,
do not turn off TRAC and Enhanced VSC unless necessary.

2-4. Using other driving systems

Hill-start assist control
Hill-start assist control helps to prevent the vehicle from rolling
backwards when starting on an incline or slippery slope.

To engage hill-start assist control, further depress the brake
pedal when the vehicle is
stopped completely.
A buzzer will sound once to
indicate the system is activated. The slip indicator will
also start flashing.

■ Hill-start assist control operating conditions
The system operates in the following situations:
• The shift lever is in a position other than P.
• The parking brake is not applied.
• The accelerator pedal is not depressed.
■ Hill-start assist control
● While hill-start assist control is operating, the brakes remain automatically applied after the driver releases the brake pedal. The stop lights and
the high mounted stoplight turn on.
● Hill-start assist control operates for about 2 seconds after the brake pedal
is released.
● If the slip indicator does not flash and the buzzer does not sound when
the brake pedal is further depressed, slightly reduce the pressure on the
brake pedal (do not allow the vehicle to roll backward) and then firmly
depress it again. If the system still does not operate, check that the operating conditions explained above have been met.

216

2-4. Using other driving systems

■ Hill-start assist control buzzer
● When hill-start assist control is activated, the buzzer will sound once.
● In the following situations, hill-start assist control will be canceled and the
buzzer will sound twice.
• No attempt is made to drive the vehicle within approximately 2 seconds
of releasing the brake pedal.
• The shift lever is moved to P.
• The parking brake is applied.
• The brake pedal is depressed again.
• The brake pedal has been depressed for more than approximately 3
minutes.

When driving

■ If the slip indicator comes on...
It may indicate a malfunction in the system. Contact your Toyota dealer.

CAUTION
■ Hill-start assist control
● Do not overly rely on hill-start assist control. Hill-start assist control may
not operate effectively on extremely steep inclines or roads covered in ice.
● Unlike the parking brake, hill-start assist control is not intended to hold the
vehicle stationary for an extended period of time. Do not attempt to use
hill-start assist control to hold the vehicle on an incline for an extended
period of time, as doing so may lead to an accident.

217

2-4. Using other driving systems

Downhill assist control system (4WD models)
With the downhill assist control system, the vehicle is able to
descend a steep hill, maintaining a constant low speed of about 3
mph (5 km/h) without brake pedal operation.

■ Activating the downhill assist control system
Press the “DAC” switch.
The downhill assist control system indicator will come on to
indicate that the downhill assist
control system is activated.
Pressing the switch again turns
the system off.

While the downhill assist control system is operating
The slip indicator will flash to
indicate that the downhill assist
control system is operating, and
the stop lights and high mounted
stoplight will turn on.

218

2-4. Using other driving systems

■ Conditions in which the downhill assist control system does not operate
● In the following situations, the downhill assist control system indicator
flashes and the downhill assist control system does not operate or will
stop operating:
• The shift lever is not in “1” range of S mode or R.
• The vehicle speed is higher than 15 mph (25 km/h).
● If the accelerator or brake pedal is depressed, the downhill assist control
system will stop operating with the downhill assist control system indicator still on.

The downhill assist control system gradually ceases operation. The downhill
assist control system indicator will flash during the canceling operation, and
then go off when the system is fully off.
■ Downhill assist control system operation sound
● A sound may be heard from the engine compartment during operation of
the downhill assist control system. This sound does not indicate a malfunction.
● If the accelerator or brake pedal is depressed during operation of the
downhill assist control system, a sound caused by the release of system
operation may be heard, or you may feel the brake pedal push-back. This
does not indicate a malfunction.
■ When the downhill assist control system operates continuously
The brake actuator may overheat. In that case, the downhill assist control
system will stop operating, a buzzer will sound and the downhill assist control system indicator will start flashing. Refrain from using the system until
the downhill assist control system indicator stays on. (There is no problem
with continuing to drive normally.)
■ If the slip indicator comes on...
It may indicate a malfunction in the system. Contact your Toyota dealer.

219

When driving

■ If the “DAC” switch is turned off during operation of the downhill assist
control system

2-4. Using other driving systems

CAUTION
■ Conditions which may affect the downhill assist control system operation
● Do not rely too heavily on the downhill assist control system. On extremely
steep inclines, icy surfaces or muddy roads, the vehicle may slip and the
system may not be able to maintain the constant low vehicle speed of
about 3 mph (5 km/h), leading to an accident causing death or serious
injury.
● Do not shift the shift lever to R while driving forward, or to D while driving
backward. Doing so may cause the wheels to lock up, leading to an accident causing death or serious injury. In addition, excessive stress will be
applied to the automatic transmission, possibly resulting in damage.

220

2-5. Driving information

Off-road precautions
This vehicle belongs to the utility vehicle class, which has higher
ground clearance and narrower tread in relation to the height of its
center of gravity to make it capable of performing in a wide variety
of off-road applications.

Off-road vehicle feature

● An advantage of the higher ground clearance is a better view of the
road allowing you to anticipate problems.
● It is not designed for cornering at the same speeds as an ordinary
passenger car. Sharp turns at excessive speeds may cause rollover.

221

When driving

● Specific design characteristics give it a higher center of gravity
than ordinary passenger cars. This vehicle design feature causes
this type of vehicle to be more likely to rollover. And, utility vehicles
have a significantly higher rollover rate than other types of vehicles.

2-5. Driving information

CAUTION
■ Off-road vehicle precautions
Always observe the following precautions to minimize the risk of serious personal injury or damage to your vehicle:
● In a rollover crash, an unbelted person is significantly more likely to die
than a person wearing a seat belt. Therefore, the driver and all passengers
should fasten their seat belts whenever the vehicle is moving.
● Avoid sharp turns or abrupt maneuvers, if at all possible.
Failure to operate this vehicle correctly may result in loss of control or
vehicle rollover causing death or serious injury.
● Loading cargo on the roof luggage carrier will make the center of the vehicle gravity higher. Avoid high speeds, sudden starts, sharp turns, sudden
braking or abrupt maneuvers, otherwise it may result in loss of control or
vehicle rollover due to failure to operate this vehicle correctly.
● Always slow down in gusty crosswinds. Because of its profile and higher
center of gravity, your vehicle is more sensitive to side winds than an ordinary passenger car. Slowing down will allow you to have better control.
● Do not drive horizontally across steep slopes. Driving straight up or
straight down is preferred. Your vehicle (or any similar off-road vehicle)
can tip over sideways much more easily than forward or backward.

222

2-5. Driving information

Off-road driving
When driving your vehicle off-road, please observe the following precautions to ensure your driving enjoyment and to help prevent the
closure of areas to off-road vehicles.
● Drive your vehicle only in areas where off-road vehicles are permitted to travel.
● Respect private property. Get owner’s permission before entering
private property.

● Do not enter areas that are closed. Honor gates, barriers and signs
that restrict travel.

When driving

● Stay on established roads. When conditions are wet, driving techniques should be changed or travel delayed to prevent damage to
roads.
■ Additional information for off-road driving
For owners in U.S. mainland, Hawaii and Puerto Rico:
To obtain additional information pertaining to driving your vehicle off-road,
consult the following organizations.
● State and Local Parks and Recreation Departments
● State Motor Vehicle Bureau
● Recreational Vehicle Clubs
● U.S. Forest Service and Bureau of Land Management

223

2-5. Driving information

CAUTION
■ Off-road driving precautions
Always observe the following precautions to minimize the risk of serious personal injury or damage to your vehicle:
● Drive carefully when off the road. Do not take unnecessary risks by driving
in dangerous places.
● Do not grip the steering wheel spokes when driving off-road. A bad bump
could jerk the wheel and injure your hands. Keep both hands and especially your thumbs on the outside of the rim.
● Always check your brakes for effectiveness immediately after driving in
sand, mud, water or snow.
● After driving through tall grass, mud, rock, sand, rivers, etc., check that
there is no grass, bush, paper, rags, stone, sand, etc. adhering or trapped
on the underbody. Clear off any such matter from the underbody. If the
vehicle is used with these materials trapped or adhering to the underbody,
a breakdown or fire could occur.
● When driving off-road or in rugged terrain, do not drive at excessive
speeds, jump, make sharp turns, strike objects, etc. This may cause loss
of control or vehicle rollover causing death or serious injury. You are also
risking expensive damage to your vehicle’s suspension and chassis.

NOTICE
■ To prevent water damage
Take all necessary safety measures to ensure that water damage to the
engine or other components does not occur.
● Water entering the engine air intake will cause severe engine damage.
● Water entering the automatic transmission will cause deterioration in shift
quality, locking up of your transmission accompanied by vibration, and ultimately damage.
● Water can wash the grease from wheel bearings, causing rusting and premature failure, and may also enter the differentials, transmission and
transfer case, reducing the gear oil’s lubricating qualities.

224

2-5. Driving information

NOTICE
■ When you drive through water
If driving through water, such as when crossing shallow streams, first check
the depth of the water and the bottom of the river bed for firmness. Drive
slowly and avoid deep water.
■ Inspection after off-road driving
● Sand and mud that has accumulated in brake drums and around brake
discs may affect braking efficiency and may damage brake system components.

225

When driving

● Always perform a maintenance inspection after each day of off-road driving that has taken you through rough terrain, sand, mud, or water. For
scheduled maintenance information, refer to the “Scheduled Maintenance
Guide” or “Owner’s Manual Supplement”.

2-5. Driving information

Cargo and luggage
Take notice of the following information about storage precautions, cargo capacity and load.

● Stow cargo and luggage in the luggage compartment whenever
possible. Be sure all items are secured in place.
● Be careful to keep the vehicle level. Placing the weight as far forward as possible helps maintain vehicle balance.
● For better fuel economy, do not carry unnecessary weight.

Capacity and distribution
Cargo capacity depends on the total weight of the occupants.
(Cargo capacity) = (Total load capacity) - (Total weight of occupants)
Steps for Determining Correct Load Limit⎯
(1)Locate the statement “The combined weight of occupants and
cargo should never exceed XXX kg or XXX lbs.” on your vehicle's
placard.
(2)Determine the combined weight of the driver and passengers that
will be riding in your vehicle.
(3)Subtract the combined weight of the driver and passengers from
XXX kg or XXX lbs.
(4)The resulting figure equals the available amount of cargo and luggage load capacity.
For example, if the “XXX” amount equals 1400 lbs. and there will
be five 150 lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 × 150) =
650 lbs.)
(5)Determine the combined weight of luggage and cargo being
loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
226

2-5. Driving information

(6)If your vehicle will be towing a trailer, load from your trailer will be
transferred to your vehicle. Consult this manual to determine how
this reduces the available cargo and luggage load capacity of your
vehicle.
Example on your vehicle
Cargo capacity

Total load capacity

When driving

When 2 people with the combined weight of 366 lb. (166 kg) are
riding in your vehicle, which has a total load capacity of 1200 lb. (544
kg), the available amount of cargo and luggage load capacity will be
as follows:
1200 lb. - 366 lb. = 834 lb. (544 kg -166 kg = 378 kg)
In this condition, if 3 more passengers with the combined weight of
388 lb. (176 kg) get on, the available cargo and luggage load will be
reduced as follows:

834 lb. - 388 lb. = 446 lb. (378 kg - 176 kg = 202 kg)
As shown in the above example, if the number of occupants
increases, the cargo and luggage load will be reduced by an amount
that equals the increased weight due to the additional occupants. In
other words, if an increase in the number of occupants causes an
excess of the total load capacity (combined weight of occupants plus
cargo and luggage load), you must reduce the cargo and luggage on
your vehicle.

227

2-5. Driving information

CAUTION
■ Things that must not be carried in the luggage compartment

The following things may cause a fire if loaded in the luggage compartment.
● Receptacles containing gasoline
● Aerosol cans
■ Storage precautions
Observe the following precautions.
Failing to do so may result in death or serious injury.
● Do not place cargo or luggage in or on the following locations as the

item may get under the brake or accelerator pedal and prevent the
pedals from being depressed properly, block the driver’s vision, or hit
the driver or passengers, causing an accident.
• Driver’s feet
• Front passenger or rear seats (when stacking items)
• Luggage cover
• Instrument panel
• Dashboard
● Secure all items in the occupant compartment, as they may shift and
injure someone during sudden braking, sudden swerving or an accident.
● When you fold down the rear seats, long items should not be placed

directly behind the front seats.
● Never allow anyone to ride in the luggage compartment. It is not

designed for passengers. They should ride in their seats with their seat
belts properly fastened. Otherwise, they are much more likely to suffer
serious bodily injury, in the event of sudden braking, sudden swerving
or an accident.

228

2-5. Driving information

CAUTION
■ Capacity and distribution
● Do not exceed the maximum axle weight rating or the total vehicle

weight rating.
● Even if the total load of occupant's weight and the cargo load is less

than the total load capacity, do not apply the load unevenly.
Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.

■ Roof luggage carrier precautions (if equipped)

When you load cargo on the roof luggage carrier, observe the following:
Cross rails

● Place the cargo so that its weight is

distributed evenly between the front
and rear axles.
● If loading long or wide cargo, never

Roof rails

exceed the vehicle overall length or
width. (→P. 552)

● Before driving, make sure the cargo is securely fastened on the roof

luggage carrier.
● Loading cargo on the roof luggage carrier will make the center of the

vehicle gravity higher. Avoid high speeds, sudden starts, sharp turns,
sudden braking or abrupt maneuvers, otherwise it may result in loss of
control or vehicle rollover due to failure to operate this vehicle correctly
and result in death or serious injury.
● If driving for a long distance, on rough roads, or at high speeds, stop

the vehicle now and then during the trip to make sure the cargo
remains in its place.
● Do not exceed 100 lb. (45 kg) cargo weight on the roof luggage carrier.

229

When driving

To use the roof rails as a roof luggage carrier, you must fit the roof rails
with two or more genuine Toyota cross rails or their equivalent.

2-5. Driving information

Vehicle load limits
Vehicle load limits include total load capacity, seating capacity,
towing capacity and cargo capacity.

■ Total load capacity: 1200 lb. (544 kg)
Total load capacity means the combined weight of occupants, cargo
and luggage.

■ Seating capacity: 7 occupants (Front 2, Rear 5)
Seating capacity means the maximum number of occupants whose
estimated average weight is 150 lb. (68 kg) per person.

■ Towing capacity
2.7 L 4-cylinder (1AR-FE) engine
Without towing package: 1500 lb. (680 kg)
With towing package: 3500 lb. (1500 kg)
3.5 L V6 (2GR-FE) engine
Without towing package: 2000 lb. (900 kg)
With towing package: 5000 lb. (2000 kg)
Towing capacity means the maximum gross trailer weight (trailer
weight plus its cargo weight) that your vehicle is able to tow.

■ Cargo capacity
Cargo capacity may increase or decrease depending on the weight
and the number of occupants.

■ Total load capacity and seating capacity

These details are also described on the tire and loading information
label. (→P. 465)

CAUTION
■ Overloading the vehicle

Do not overload the vehicle.
It may not only cause damage to the tires, but also degrade steering and
braking ability, resulting in an accident.
230

2-5. Driving information

Winter driving tips
Carry out the necessary preparations and inspections before driving
the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions.

■ Pre-winter preparations
● Use fluids that are appropriate to the prevailing outside temperatures.
• Engine oil
• Engine coolant
• Washer fluid

● Have the vehicle fitted with four snow tires or purchase a set
of tire chains for the front tires.
Ensure that all tires are the same size and brand, and that chains
match the size of the tires.

■ Before driving the vehicle
Observe the following according to the driving conditions.
● Do not try to forcibly open a window or move a wiper that is
frozen. Pour warm water over the frozen area to melt the ice.
Wipe away the water immediately to prevent it from freezing.
● To ensure proper operation of the climate control system fan,
remove any snow that has accumulated on the air inlet vents
in front of the windshield.
● Remove any ice that has accumulated on the vehicle chassis.
● Periodically check for and remove any excess ice or snow
that may have accumulated in the wheel well or on the
brakes.

231

When driving

● Have a service technician inspect the level and specific gravity of battery electrolyte.

2-5. Driving information

■ When driving the vehicle
Accelerate the vehicle slowly and drive at a reduced speed suitable to road conditions.
■ When parking the vehicle
Park the vehicle and move the shift lever to P without setting the
parking brake. The parking brake may freeze up, preventing it
from being released. If necessary, brake the wheels to prevent
inadvertent sliding or creeping.

Selecting tire chains
Use the correct tire chain size when mounting the snow chains.
Chain size is regulated for each tire size.
Side chain
0.12 in. (3 mm) in diameter
0.39 in. (10 mm) in width
1.18 in. (30 mm) in length
Cross chain
0.16 in. (4 mm) in diameter
0.55 in. (14 mm) in width
0.98 in. (25 mm) in length
Regulations on the use of snow chains
● Regulations regarding the use of tire chains vary according to location and type of road. Always check local regulations before installing chains.
● Install the chains on the front tires.
● Retighten the chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km).

232

2-5. Driving information

■ Tire chains
Observe the following precautions when installing and removing chains.
● Install and remove tire chains in a safe location.
● Install tire chains on the front tires.
● Install tire chains following the instructions provided in the accompanying
manual.
2

CAUTION

Observe the following precautions to reduce the risk of accidents.
Failing to do so may result in a loss of vehicle control and cause death or
serious injury.
● Use tires of the specified size.
● Maintain the recommended level of air pressure.
● Do not drive in excess of 75 mph (120 km/h), regardless of the type of
snow tires being used.
● Snow tires should be installed on all wheels.
■ Driving with tire chains
Observe the following precautions to reduce the risk of accidents.
Failing to do so may result in the vehicle being unable to be driven safely,
and may cause death or serious injury.
● Do not drive in excess of the speed limit specified for the tire chains being
used or 30 mph (50 km/h), whichever is lower.
● Avoid driving on bumpy road surfaces or over potholes.
● Avoid sudden turns and braking.
● Slow down sufficiently before entering a curve to ensure that vehicle control is maintained.

233

When driving

■ Driving with snow tires

2-5. Driving information

NOTICE
■ Repairing or replacing snow tires
Request repairs of and obtain replacement snow tires from Toyota dealers or
legitimate tire retailers.
This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters.
■ Fitting tire chains
The tire pressure warning valves and transmitters may not function correctly
when tire chains are fitted.

234

2-5. Driving information

Trailer towing
Your vehicle is designed primarily as a passenger carrying vehicle.
Towing a trailer will have an adverse effect on handling, performance, braking, durability, and fuel consumption. For your safety
and the safety of others, do not overload the vehicle or trailer.
To tow a trailer safely, use extreme care and drive the vehicle in
accordance with the trailer's characteristics and operating conditions.
The vehicle stability and braking performance are affected by trailer
stability, brake setting and performance, and the hitch.

Contact your Toyota dealer for further information about additional
requirements such as a towing kit.

Weight limits
Confirm that the gross trailer weight, gross vehicle weight, gross axle
weight and trailer tongue load are all within the limits.
lb. (kg)
Towing capacity
2.7 L 4-cylinder
(1AR-FE) engine

3.5 L V6
(2GR-FE) engine

Without towing package

1500 (680)

2000 (900)

With towing package

3500 (1500)

5000 (2000)

● The gross trailer weight must never exceed towing capacity
described in the table above.

235

When driving

Toyota warranties do not apply to damage or malfunction caused by
towing a trailer for commercial purposes.

2-5. Driving information

● The gross vehicle weight must
never exceed the GVWR indicated the Certification Label.
● The gross axle weight on each
axle must never exceed the
GAWR indicated the Certification Label.
Towing related term
Towing related term

236

Meaning

GVWR (Gross Vehicle
Weight Rating)

The maximum allowable gross vehicle
weight. The gross vehicle weight is the
total weight of the vehicle. When towing
a trailer, it is the sum of the vehicle
weight (including the occupants, cargo
and any optional equipment installed on
the vehicle) and the tongue load.

GAWR (Gross Axle Weight
Rating)

The maximum allowable gross axle
weight. The gross axle weight is the load
placed on each axle (front and rear).

Gross trailer weight

The sum of the trailer weight and the
weight of the cargo in the trailer

2-5. Driving information

Towing related term

Towing capacity

The maximum allowable gross trailer
weight. Towing capacity is calculated
considering the base vehicle with necessary vehicle equipment and occupants.
Additional optional equipment, passengers and cargo in the vehicle will reduce
the towing capacity, gross trailer weight
include the trailer, cargo and necessary
equipment for towing.

The load placed on the trailer hitch ball

Trailer tongue load
● A recommended tongue load varies in accordance with the types
of trailers or towing as described below.
● In order to ensure the recommended values shown below, the
trailer must be loaded by referring to the following instructions.
The trailer cargo load should be distributed so that the tongue load
is 9 to 11% of the gross trailer weight, not exceeding the following.
2.7 L 4-cylinder (1AR-FE) engine
Without towing package: 150 lb. (68 kg)
With towing package: 350 lb. (150 kg)
3.5 L V6 (2GR-FE) engine
Without towing package: 200 lb. (90 kg)
With towing package: 500 lb. (200 kg)
(Tongue load / Gross trailer weight x 100 = 9 to 11%)
If the gross trailer weight is over 2000 lbs. (900 kg), it is necessary
to use a sway control device with sufficient capacity.

237

When driving

Tongue load

Meaning

2-5. Driving information

The gross trailer weight and tongue load can be measured with platform scales found at a highway weighing station, building supply
company, trucking company, junk yard, etc.
Gross trailer weight
Tongue load

Hitch
Trailer hitch assemblies have different weight capacities established
by the hitch manufacturer. Even though the vehicle may be rated for
towing a higher weight, the operator must never exceed the maximum weight rating specified for the trailer hitch.

238

2-5. Driving information

Connecting trailer lights
Use the wire harness stored in
the rear end underbody.

Your vehicle will handle differently when towing a trailer. In order to
avoid accident or, death or serious injury, keep the following in mind
when towing:
● Before starting out, check the trailer lights and the vehicle-trailer
connections. Recheck after driving a short distance.
● Practice turning, stopping and reversing with the trailer attached in
an area away from traffic until you become accustomed to the feel
of the vehicle.
● Reversing with a trailer attached is difficult and requires practice.
Grip the bottom of the steering wheel and move your hand to the
left to move the trailer to the left. Move your hand to the right to
move the trailer to right. (This is generally opposite to reversing
without a trailer attached.) Avoid sharp or prolonged turning. Have
someone guide you when reversing to reduce the risk of an accident.

239

When driving

Trailer towing tips

2-5. Driving information

● As stopping distance is increased when towing a trailer, vehicle-tovehicle distance should be increased. For each 10 mph (16 km/h)
of speed, allow at least one vehicle and trailer length.
● Avoid sudden braking as you may skid, resulting in jackknifing and
loss of control. This is especially true on wet or slippery surfaces.
● Avoid jerky starts or sudden acceleration.
● Avoid jerky steering and sharp turns, and slow down before making turns.
● Note that when making a turn, the trailer wheels will be closer than
the vehicle wheels to the inside of the turn. Compensate by making
a larger than normal turning radius.
● Crosswinds and rough roads will adversely affect handling of your
vehicle and trailer, causing sway. Periodically check the rear to
prepare for being passed by large trucks or buses, which may
cause your vehicle and trailer to sway. If swaying occurs, firmly grip
the steering wheel, reduce speed immediately but gradually, and
steer straight ahead. Never increase speed. If you make no
extreme correction with the steering or brakes, your vehicle and
trailer will stabilize.
● Take care when passing other vehicles. Passing requires considerable distance. After passing a vehicle, do not forget the length of
your trailer, and be sure you have plenty of room before changing
lanes.
● 2.7 L 4-cylinder (1AR-FE) engine: In order to maintain engine braking efficiency when driving on a long steep downgrade, do not use
overdrive. Transmission shift range position must be in 5 in S
mode.
● 3.5 L V6 (2GR-FE) engine: In order to maintain engine braking efficiency when driving on a long steep downgrade, do not use overdrive. Transmission shift range position must be in 4 in S mode.

240

2-5. Driving information

● Due to the added load of the trailer, your vehicle's engine may
overheat on hot days (at temperatures over 85°F [30°C]) when
driving up a long or steep grade. If the engine coolant temperature
gauge indicates overheating, immediately turn off the air conditioning (if in use), pull your vehicle off the road and stop in a safe spot.
(→P. 544)
● Always place wheel blocks under both the vehicle and the trailer
wheels when parking. Apply the parking brake firmly, and put the
transmission in P. Avoid parking on a slope, but if unavoidable, do
so only after performing the following:
Apply the brakes and keep them applied.

STEP 2

Have someone place wheel blocks under both the vehicle and
trailer wheels.

STEP 3

When the wheel blocks are in place, release the brakes slowly
until the blocks absorb the load.

STEP 4

Apply the parking brake firmly.

STEP 5

Shift into P and turn off the engine.

● When restarting after parking on a slope:
STEP 1

With the transmission in the P position, start the engine. Be
sure to keep the brake pedal pressed.

STEP 2

Shift into 3, 2, 1, or the R position (if reversing).

STEP 3

Release the parking brake and brake pedal and slowly pull or
back away from the wheel blocks. Stop and apply the brakes.

STEP 4

Have someone retrieve the blocks.

241

When driving

STEP 1

2-5. Driving information

■ Before towing
Check that the following conditions are met:
● The vehicle's tires are properly inflated. (→P. 563)
● Trailer tires are inflated according to the trailer manufacturer's recommendation.
● All trailer lights work.
● All lights work each time you connect them.
● The trailer ball is set up at the proper height for the coupler on the trailer.
● The vehicle remains level when a loaded or unloaded trailer is hitched.
Do not drive if the vehicle is not level, and check for improper tongue
load, overloading, worn suspension, or other possible causes.
● The trailer cargo is securely loaded.
● The rear view mirrors conform to all applicable federal, state/provincial or
local regulations. If they do not, install rear view mirrors appropriate for
towing purposes.
■ Break-in schedule
Toyota recommends that you do not use a new vehicle or a vehicle with any
new power train components (engine, transmission, differential, wheel bearings, etc.) to tow a trailer for the first 500 miles (800 km) of driving.
■ Maintenance
● If you tow a trailer, your vehicle will require more frequent maintenance
due to the additional load. (See “Scheduled Maintenance Guide” or
“Owner’s Manual Supplement”.)
● Retighten the fixing bolts of the towing ball and bracket after approximately 600 miles (1000 km) of trailer towing.

242

2-5. Driving information

CAUTION
■ Trailer towing precautions
● Follow all the instructions described in this section. Failure to do so could
cause an accident resulting in death or serious injury.
● Exceeding the towing capacity, GVWR or GAWR can cause an accident
resulting in death or serious personal injuries.
■ To avoid accident or injury

● Do not exceed the trailer hitch assembly weight, gross vehicle weight,
gross axle weight and trailer tongue load capacities.
● Never load more weight in the back than in the front of the trailer. About
60% of the load should be in the front half of the trailer, and the remaining
40% in the rear.
● Do not use cruise control when you are towing.
● Slow down and downshift before descending steep or long downhill
grades. Do not make sudden downshifts.
● Avoid holding the brake pedal down too long or applying the brakes too
frequently. This could cause the brakes to overheat and result in reduced
braking efficiency.
● Do not tow the vehicle with the compact spare tire installed.
■ Hitches
● If you wish to install a trailer hitch, contact your Toyota dealer.
● Use only a hitch that conforms to the gross trailer weight requirement.
● 2.7 L 4-cylinder (1AR-FE) engine: The towing capacity of 3500 lb. (1500
kg) can only be guaranteed when using a genuine Toyota hitch assembly
or equivalent.
● 3.5 L V6 (2GR-FE) engine: The towing capacity of 5000 lb. (2000 kg) can
only be guaranteed when using a genuine Toyota hitch assembly or equivalent.
● Follow the directions supplied by the hitch manufacturer.
243

When driving

● Do not exceed 45 mph (72 km/h) or the posted towing speed limit, whichever is lower. As instability (swaying) of the towing vehicle-trailer combination increases as speed increases, exceeding 45 mph (72 km/h) may
cause loss of control.

2-5. Driving information

CAUTION
● Lubricate the hitch ball with a light coat of grease.
● Remove the trailer hitch whenever you are not towing a trailer. After
removing the hitch, seal any mounting hole in the vehicle body to prevent
entry of any substances into the vehicle.
■ When towing a trailer
● If the gross trailer weight exceeds 1000 lb. (453 kg), trailer brakes are
required. Toyota recommends trailers with brakes that conform to all applicable federal and state/provincial regulations.
● Never tap into your vehicle's hydraulic system, as this will lower the vehicle's braking effectiveness.
● Never tow a trailer without using a safety chain securely attached to both
the trailer and the vehicle. If damage occurs to the coupling unit or hitch
ball, there is danger of the trailer wandering into another lane.

NOTICE
■ When installing a trailer hitch
● Use only the position recommended by your Toyota dealer. Do not install
the trailer hitch on the bumper as this may cause body damage.
● Do not use axle-mounted hitches, as they can cause damage to the axle
housing, wheel bearings, wheels or tires.
■ Safety chain
A safety chain must always be used between the towing vehicle and the
trailer. Leave sufficient slack in the chain for turns. The chain should cross
under the trailer tongue to prevent the tongue from dropping to the ground in
the case that it becomes damaged or separated. For the correct safety chain
installation procedure, ask your Toyota dealer.
■ Do not directly splice trailer lights
Directly splicing trailer lights may damage your vehicle's electrical system
and cause a malfunction.

244

2-5. Driving information

Dinghy towing
Your vehicle is not designed to be dinghy towed (with 4 wheels on
the ground) behind a motor home.

When driving

NOTICE
■ To avoid serious damage to your vehicle
Do not tow your vehicle with 4 wheels on the ground.

245

3-1. Using the air conditioning system and defogger

Front manual air conditioning system∗

Temperature control dial
Fan speed control dial

Outside air or recirculated air mode
Air outlet selection dial

Rear air conditioning
Air conditioning on/off switch
on/off switch (if equipped)

Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
If

is not pressed, the system will blow ambient temperature air or

heated air.
For quick cooling, turn the temperature selector knob to the “MAX A/C”
position. The air conditioning will automatically turn on in

(recir-

culated air) mode.

∗: If equipped
248

3-1. Using the air conditioning system and defogger

■ Adjusting the fan speed
Turn the fan speed control dial clockwise (increase) or counterclockwise (decrease).
Turn the dial to “OFF” to turn the fan off.

■ Changing the air outlets
Set the air outlet selection dial to an appropriate position.
The positions between the air outlet selections shown below can be also
selected for more detailed adjustment.

Upper body
3

Interior features

: Vehicles without rear air conditioning system
Upper body and feet

: Vehicles without rear air conditioning system

249

3-1. Using the air conditioning system and defogger

Feet

: Vehicles without rear air conditioning system
Without rear air conditioning system
Feet and windshield
Recirculated air mode may automatically switch to outside air
mode.

With rear air conditioning system
Feet and windshield
Recirculated air mode may automatically switch to outside air
mode.

250

3-1. Using the air conditioning system and defogger

■ Switching between outside air and recirculated air modes
Press

The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) modes each time

is pressed.

Defogging the windshield
Set the air outlet selection dial to
position.

Recirculated air mode may automatically switch to outside air
mode.

251

Interior features

The air conditioning system operates automatically.

3-1. Using the air conditioning system and defogger

Adjusting the position of and opening and closing the air outlets
Front center outlets
Direct air flow to the left or right,
up or down.

Front side outlets
Direct air flow to the left or
right, up or down.
Turn the knob to open or close
the vent.

Rear center outlets (vehicles without rear air conditioning system)
Direct air flow to the left or
right, up or down.
Turn the knob to open or close
the vent.

252

3-1. Using the air conditioning system and defogger

■ Using the system in recirculated air mode
The windows will fog up more easily if the recirculated air mode is used for
an extended period.
■ Window defogger feature
In order to prevent the windows from fogging up, recirculated air mode may
automatically switch to outside air mode if the ambient temperature drops.
This feature can be canceled by pushing and holding the air intake mode
switch for longer than 2 seconds. The feature will be reactivated when the
engine switch is turned to the “ACC” or “LOCK” position.
■ When outside air temperature approaches 32°F (0°C)
The air conditioning system may not operate even when
■ When the indicator light on
engine only)

flashes (2.7 L 4-cylinder [1AR-FE]

and turn off the air conditioning system before turning it on

once more. There may be a problem in the air conditioning system if the indicator light continues to flash. Turn the air conditioning system off and have it
inspected by your Toyota dealer.
■ When

is selected for the air outlets used

For your driving comfort, air flowing to the feet may be warmer than air flowing to the upper body depending on the position of the temperature adjustment dial.
■ Air conditioning odors
● During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.
● To reduce potential odors from occurring:
It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.

253

Interior features

Press

is pressed.

3-1. Using the air conditioning system and defogger

CAUTION
■ To prevent the windshield from fogging up
Do not set the air outlet selection dial to
during cool air operation in
extremely humid weather. The difference between the temperature of the
outside air and that of the windshield can cause the outer surface of the
windshield to fog up, blocking your vision.

NOTICE
■ To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is off.

254

3-1. Using the air conditioning system and defogger

Front automatic air conditioning system∗
Airflow and outlets are automatically adjusted according to the temperature setting.

Control panel
Temperature control
for rear passengers
Windshield defogger
Automatic mode

Rear air conditioning
on/off switch
Fan speed
Outside air or
recirculated
air mode

Driver's side
temperature
control dial

Individual
mode

Interior features

Front passenger’s side
temperature control dial
Off
Changes the air outlets used

Simultaneous
mode

Air conditioning
on/off switch

Vehicles with rear air conditioning system
Vehicles without rear air conditioning system

∗: If equipped
255

3-1. Using the air conditioning system and defogger

Multi-information display

Airflow display

Driver’s side
temperature
setting
display

Fan speed
display

Temperature setting display
for rear passengers

Front passenger’s side
temperature setting display

Using the automatic mode

STEP 1

Press

The air conditioning system begins to operate. Air outlets
and fan speed are automatically adjusted according to the
temperature setting.
“AUTO” will be displayed on the multi-information display.
STEP 2

Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
Air outlets and fan speed for the right-hand and left-hand seats may
be set separately depending on the temperature setting.

256

3-1. Using the air conditioning system and defogger

Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
The air conditioning system switches between individual and
simultaneous modes each time
(without rear air conditioning
system) or
(with rear air conditioning system) is pressed.
Simultaneous mode: Only the driver’s side temperature control dial
can be used to adjust the temperature for all seats.
The indicator status will be as follows:

Without rear air conditioning system:

(on)

Individual mode: The temperature for the driver’s, front passenger’s and rear seats (→P. 266) can be adjusted separately. Operating the passenger's side or rear (with rear air conditioning system)
temperature control will enter individual mode.
The indicator status will be as follows:
Without rear air conditioning system:
With rear air conditioning system:

(on)
(off)

■ Adjusting the fan speed
Press “∧” (increase) or “∨” (decrease) on

The fan speed is shown on the multi-information display. (7 levels)
Press

to turn the fan off.

257

Interior features

With rear air conditioning system:

(off)

3-1. Using the air conditioning system and defogger

■ Changing the air outlets
Press

The air outlets switch each time either side of
flow shown on the display indicates the following.

is pressed. The air

Upper body

: Vehicles without rear air conditioning system
Upper body and feet

: Vehicles without rear air conditioning system
Feet

: Vehicles without rear air conditioning system

258

3-1. Using the air conditioning system and defogger

Without rear air conditioning system
Feet and windshield
Recirculated air mode may automatically switch to outside air
mode.

With rear air conditioning system
Feet and windshield

■ Switching between outside air and recirculated air modes
Press

The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) modes each time

is pressed.

259

Interior features

Recirculated air mode may automatically switch to outside air
mode.

3-1. Using the air conditioning system and defogger

Changing the rear seat settings (if equipped)
■ Adjusting the temperature setting
Press “∧” on
to increase the temperature and “∨” to
decrease the temperature.
The air conditioning system switches between individual and
simultaneous modes each time
is pressed.
Defogging the windshield

Press

The air conditioning system operates automatically.
Recirculated air mode may automatically switch to outside air
mode.

Adjusting the position of and opening and closing the air outlets
Front center outlets
Direct air flow to the left or right,
up or down.

260

3-1. Using the air conditioning system and defogger

Front side outlets
Direct air flow to the left or
right, up or down.
Turn the knob to open or close
the vent.

Rear center outlets (vehicles without rear air conditioning system)
Direct air flow to the left or
right, up or down.

■ Using the automatic mode
Fan speed is adjusted automatically in accordance with the temperature setting and ambient conditions. As a result, the following may occur.
● Immediately after the switch is pressed, the fan may stop for a while until
warm or cool air is ready to flow.
● Cool air may flow to the area around the upper body when the heater is
on.
■ Using the system in recirculated air mode
The windows will fog up more easily if the recirculated air mode is used for
an extended period.

261

Interior features

Turn the knob to open or close
the vent.

3-1. Using the air conditioning system and defogger

■ Switching between outside air and recirculated air modes
Recirculated air mode or outside air mode may be automatically switched to
in accordance with the temperature setting and the inside temperature.
■ Window defogger feature
Recirculated air mode may automatically switch to
in situations where the windows need to be defogged.

(outside air) mode

■ When outside temperature approaches 32°F (0°C)
The air conditioning system may not operate even when

is pressed.

■ Air conditioning odors
● During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.
● To reduce potential odors from occurring:
• It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.
• The start timing of the blower may be delayed for a short period of time
immediately after the air conditioning system is started in automatic
mode.

CAUTION
■ To prevent the windshield from fogging up

Do not use

during cool air operation in extremely humid weather. The

difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your
vision.

NOTICE
■ To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is off.
262

3-1. Using the air conditioning system and defogger

Rear manual air conditioning system∗

Airflow and outlets are automatically adjusted according to the temperature setting.
Changes the air outlets used

3
Fan speed control dial

Temperature control dial

Interior features

∗: If equipped
263

3-1. Using the air conditioning system and defogger

Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
■ Changing the air outlets
Press the desired

Air flows as shown below according to the mode selected.
Upper body

Upper body and feet

264

3-1. Using the air conditioning system and defogger

Feet

■ Adjusting the fan speed
Turn the fan speed control dial clockwise (increase) or counterclockwise (decrease).
Adjusting the position of and opening and closing the roof side air outlets

NOTICE
■ To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is off.

265

Interior features

Direct air flow to the left or right,
up or down.

3-1. Using the air conditioning system and defogger

Rear automatic air conditioning system∗
Airflow and outlets are automatically adjusted according to the temperature setting.
Fan speed display

Airflow display

Temperature setting display

Temperature
control dial

Fan speed
control dial

Off

Automatic mode

Changes the air
outlets used

Using the automatic mode

STEP 1

Press

The air conditioning system will operate, and air outlets
and fan speed will be set automatically.
“AUTO” will be displayed on the control panel.
STEP 2

Turn the temperature control dial clockwise (warm) or counterclockwise (cool).

∗: If equipped
266

3-1. Using the air conditioning system and defogger

Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
■ Changing the air outlets
Press

The air outlets change as follows each time

is pressed.

Air flows as shown below according to the mode selected.
Interior features

Upper body

Upper body and feet

267

3-1. Using the air conditioning system and defogger

Feet

■ Adjusting the fan speed
Turn the fan speed control dial clockwise (increase) or counterclockwise (decrease).

Press

to turn the fan off.

Adjusting the position of and opening and closing the roof side air outlets
Direct air flow to the left or right,
up or down.

NOTICE
■ To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is off.

268

3-1. Using the air conditioning system and defogger

Rear window and outside rear view mirror defoggers
Clear the rear window using the defogger.

Vehicles with manual air conditioning system
On/off
Press the button to turn on the
rear window defogger. The
indicator light will come on.
The defoggers will automatically turn off after 15 to 60 minutes. The operation time
changes according to the
ambient temperature and vehicle speed. Pressing the button
again also turns the defogger
off.

Interior features

Vehicles without outside rear view mirror defoggers
Vehicles with outside rear view mirror defoggers
Vehicles with automatic air conditioning system
On/off
Press the button to turn on the
rear window defogger. The
indicator light will come on.
The defoggers will automatically turn off after 15 to 60 minutes. The operation time
changes according to the
ambient temperature and vehicle speed. Pressing the button
again also turns the defogger
off.

Vehicles without outside rear view mirror defoggers
Vehicles with outside rear view mirror defoggers

269

3-1. Using the air conditioning system and defogger

■ The defogger can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ Outside rear view mirror defoggers (vehicles with outside rear view
mirror defoggers)
Turning the rear window defogger on will turn the outside rear view mirror
defoggers on.

CAUTION
■ Outside rear view mirror defoggers (vehicles with outside rear view
mirror defoggers)
Do not touch the outside surface of the rear view mirrors, as they can
become very hot and cause burns.

270

3-1. Using the air conditioning system and defogger

Windshield wiper de-icer∗

This feature is used to prevent ice from building up on the windshield and wiper blades.

On/off
Press the button to turn on the
windshield wiper de-icer. The
indicator light will come on.
The windshield wiper de-icer
will automatically turn off after
approximately 15 minutes.

Interior features

■ The de-icer can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.

CAUTION
■ When the windshield wiper de-icer is on
Do not touch the lower part of the windshield or the side of the front pillars,
as the surfaces can become very hot and cause burns.

∗: If equipped
271

3-1. Using the air conditioning system and defogger

Using the steering wheel climate remote control switches∗
Some air conditioning features can be controlled using the switches
on the steering wheel.

Temperature control
Off
Automatic mode

Using the automatic mode
STEP 1

Press

The air conditioning system will operate, and air outlets
and fan speed will be set automatically.
“AUTO” will be displayed on the multi-information display.
STEP 2

Press “∧” on
to increase the temperature and “∨” to
decrease the temperature.

Adjusting the temperature setting
Press “∧” on
the temperature.

to increase the temperature and “∨” to decrease

Turning off the fan
Press

∗: If equipped
272

3-2. Using the audio system

Audio system
With navigation system
Owners of models equipped with a navigation system should refer
to the “Navigation System Owner's Manual”.
Without navigation system
Type A: CD player and AM/FM radio

Interior features

Type B: CD player and AM/FM radio (with CD changer controller)

273

3-2. Using the audio system

Type C: CD player with changer and AM/FM radio

Title

274

Page

Using the radio

P. 277

Using the CD player

P. 284

Playing back MP3 and WMA discs

P. 292

Operating an iPod

P. 300

Operating a USB memory

P. 307

Optimal use of the audio system

P. 315

Using the AUX port

P. 319

Using the steering wheel audio switches

P. 321

3-2. Using the audio system

Language settings (type B and C)
The language used for all voice guidance, voice recognition and messages may be changed.
STEP 1

Press

STEP 2

Press

(MORE).

STEP 3

Press

(LANG).

STEP 4

Press the

that corresponds to the desired language.

For vehicles sold in the U.S.A.
3

“ENG” (English) or “ESP” (Spanish)

“ENG” (English) or “FRAN” (French)
■ Using cellular phones
Interference may be heard through the audio system's speakers if a cellular
phone is being used inside or close to the vehicle while the audio system is
operating.

275

Interior features

For vehicles sold in Canada

3-2. Using the audio system

CAUTION
■ For vehicles sold in U.S.A. and Canada
● Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifications to this equipment will void the
user’s authority to operate this device.
● Laser products
• Do not take this unit apart or attempt to make any changes yourself.
This is an intricate unit that uses a laser pickup to retrieve information
from the surface of compact discs. The laser is carefully shielded so
that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to
laser rays and dangerous voltages.
• This product utilizes a laser.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.

NOTICE
■ To prevent battery discharge
Do not leave the audio system on longer than necessary when the engine is
off.
■ To avoid damaging the audio system
Take care not to spill drinks or other fluids over the audio system.

276

3-2. Using the audio system

Using the radio
Type A
Power

Volume
Scanning for receivable stations
Mute

Station selector

Adjusting the
frequency
Seeking the
frequency

Interior features

AM/FM
mode buttons
Changing the program type

Type B and C
Power

Volume Scanning for
receivable stations

Station selector

Seeking a frequency

Adjusting the frequency
(AM, FM mode) or
channel (SAT mode)
Displaying radio
text messages

AM/FM/SAT
mode button

Setting preset buttons

Changing the
channel category

Mute

277

3-2. Using the audio system

Setting station presets (excluding XM® Satellite Radio)

STEP 1

Search for desired stations by turning
pressing “∧” or “∨” on

STEP 2

, or

Press and hold the button (from
is to be set to until you hear a beep.
Type B and C: Each time

) the station

is pressed, station pages are

changed. There are a total of 6 pages.

Scanning radio stations (excluding XM® Satellite Radio)
■ Scanning the preset radio stations
STEP 1

Press and hold

until you hear a beep.

Preset stations will be played for 5 seconds each.
STEP 2

When the desired station is reached, press

once again.

■ Scanning all radio stations within range
STEP 1

Press

All stations with reception will be played for 5 seconds each.
STEP 2

When the desired station is reached, press

once again.

■ Displaying radio text messages (for type B and C, FM mode
only)
When a new radio text message is received, “MSG” is shown on
the display. To display the message, press
If the text continues past the end of the display, “
and hold

until you hear a beep.

Text messages are not displayed while driving.

278

.
” is displayed. Press

3-2. Using the audio system

XM® Satellite Radio (type B and C)
■ Receiving XM® Satellite Radio
STEP 1

Press

The display changes as follows each time

is pressed.

AM → FM → XM
STEP 2

Turn

to select the desired channel in all the categories,

or press “∧” or “∨” on

to select the desired channel in
3

the current category.
■ Setting XM® Satellite Radio channel presets
the

desired channel. Press and
to
) until you hear a beep.

hold

button

■ Changing the channel category
Press “∧” or “∨” on the

■ Scanning XM® Satellite Radio channels
● Scanning channels in the current category
STEP 1

Press

STEP 2

When the desired channel is reached, press
again.

● Scanning preset channels
STEP 1

Press and hold

STEP 2

When the desired channel is reached, press
again.

until you hear a beep.

279

Interior features

Select
(from

3-2. Using the audio system

■ Displaying text information
Press

Each time

is pressed, the display changes in the following order:

Title (song/program title) → Name (artist name/feature)/Title (song/program title).

Silencing the sound
Type A
Press

Press

Type B and C

280

3-2. Using the audio system

■ When the battery is disconnected
All preset stations are erased. (type A only)
■ Reception sensitivity
● Type B and C ⎯ Cargo loaded on the roof luggage carrier, especially
metal objects, may adversely affect the reception of XM® Satellite Radio.
● Maintaining perfect radio reception at all times is difficult due to the continually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains and transmitters.
● Mast type antenna ⎯ The radio antenna is mounted on the right-side
front fender. The antenna can be removed from the base by turning it.

■ XM® Satellite Radio (type B and C)
An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts
provided under a separate subscription. Availability is limited to the 48 contiguous states and 10 Canadian provinces.
● XM® subscriptions
For detailed information about XM® Satellite Radio or to subscribe:
U.S.A. ⎯
Visit on the web at www.xmradio.com or call 1-800-967-2346.
Canada ⎯
Visit on the web at www.xmradio.ca or call 1-877-438-9677.
● Radio ID
You will need the radio ID when activating XM® service or reporting a
problem. Select “CH000” using

, and the receiver's 8-character ID

number will appear.
● Satellite tuner
The tuner supports only Audio Services (Music and Talk) and the accompanying Text Information of XM® Satellite Radio.

281

Interior features

● Print type antenna ⎯ The radio antenna is mounted inside the left-side
rear quarter window. To maintain clear radio reception, do not attach
metallic window tinting or other metallic objects to the antenna wire
mounted inside the left-side rear quarter window.

3-2. Using the audio system

■ If XM® Satellite Radio does not operate normally (type B and C)
If a problem occurs with the XM® tuner, a message will appear on the display. Refer to the table below to identify the problem, and take the suggested
corrective action.

ANTENNA
or
CHECK
ANTENNA

UPDATING
or
CHANNEL NOT
AUTHORIZED

282

The XM® antenna is not connected. Check
whether the XM® antenna cable is attached
securely.
There is a short-circuit in the antenna or the surrounding antenna cable. See a Toyota certified
dealer.
You have not subscribed to the XM® Satellite
Radio. The radio is being updated with the latest
encryption code. Contact the XM® Satellite Radio
for subscription information. When a contract is
canceled, you can choose the “CH000” and all
free-to-air channels.
The premium channel you selected is not authorized. Wait for about 2 seconds until the radio
returns to the previous channel or “CH001”. If it
does not change automatically, select another
channel. If you want to listen to the premium channel, contact the XM® Satellite Radio.

NO SIGNAL

The XM® signal is too weak at the current location.
Wait until your vehicle reaches a location with a
stronger signal.

The unit is acquiring audio or program information.
Wait until the unit has received the information.

OFF AIR
or
CHANNEL OFF
AIR

The channel you selected is not broadcasting any
programming. Select another channel.

-----

There is no song/program title or artist name/feature associated with the channel at that time. No
action needed.

3-2. Using the audio system

--or
CHANNEL NOT
AVAILABLE

The channel you selected is no longer available.
Wait for about 2 seconds until the radio returns to
the previous channel or “CH001”. If it does not
change automatically, select another channel.

Contact the XM® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877438-9677 (Canada).
■ Certifications for the radio tuner
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.

● Reorienting or relocating the receiving antenna.
● Increasing the separation between the equipment and receiver.
● Connecting the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consulting the dealer or an experienced radio/TV technician for help.

NOTICE
■ To prevent damage, remove the antenna in the following cases.
(mast type antenna)
● The antenna will touch the ceiling of a garage.
● A cover will be put on the vehicle.

283

Interior features

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by trying one or more of
the following:

3-2. Using the audio system

Using the CD player
Type A
Power

Volume

CD eject

Reverse

Displaying text message
Fast-forward

Search playback

Mute

CD slot

Playback
Repeat play
Random playback
Track selection

Type B and C
Power

Volume

Selecting a track
Searching
playback

CD eject

Selecting a track/
fast-forwarding
and rewinding

284

Displaying text messages
Selector buttons

Playback

CD load
(type C only)

Playback/pause

3-2. Using the audio system

Loading CDs
■ Loading a CD
Type A and B
Insert a CD.
Type C
STEP 1

Press

STEP 2

When the indicator on the slot turns from amber to green,
insert a CD.

■ Loading multiple CDs (type C only)
STEP 1

Press and hold

STEP 2

When the indicator on the slot turns from amber to green,
insert a CD.

until you hear a beep.

STEP 3

When the indicator on the slot turns from amber to green
again, insert the next CD.
Repeat the procedure for the remaining CDs.
To cancel, press

. If you do not insert a disc within 15 sec-

onds, loading will be canceled automatically.

285

Interior features

The indicator on the slot turns to amber when the CD is inserted.

3-2. Using the audio system

Ejecting CDs
■ Ejecting a CD
Type A and B
Press

and remove the CD.

Type C
STEP 1

To select the CD to be ejected, press
(

(

) or

The selected CD number is shown on the display.
STEP 2

Press

and remove the CD.

■ Ejecting all the CDs (type C only)
Press and hold
CDs.

until you hear a beep, and then remove the

Selecting a track

Press “∧” to move up or “∨” to move down using

until the

desired track number is displayed.
Fast-forwarding and reversing tracks

To fast-forward or reverse, press and hold “∧” or “∨” on

Scanning tracks
STEP 1

Press

The first ten seconds of each track will be played.
To cancel, press
STEP 2

286

Press

again.

again when the desired track is reached.

3-2. Using the audio system

Selecting a CD (type B with a CD changer and type C)
■ Selecting a CD to play
Press

(

) or

(

■ Scanning loaded CDs
STEP 1

Press and hold

until you hear a beep.

The first ten seconds of the first track on each CD will be played.
To cancel, press
STEP 2

Press

again.

again when the desired CD is reached.

Playing and pausing tracks (type B and C)
.

Interior features

Press

Random playback
■ Current CD
Press

(RAND) or

(RDM).

Songs are played in random order.
To cancel, press the button once more (type A and type B without a CD
changer), or twice more (type B with a CD changer and type C).

■ All CDs (type B with a CD changer and type C)
Press

(RDM) twice.

Tracks on all loaded CDs are played in random order.
To cancel, press the button again.

287

3-2. Using the audio system

Repeat play
■ Repeating a track
Press

(RPT) or

(RPT).

To cancel, press the button once more (type A and type B without a CD
changer), or twice more (type B with a CD changer and type C).

■ Repeating all of the tracks on a CD (type B with a CD changer
and type C)
Press

(RPT) twice.

To cancel, press the button again.

Switching the display
Press
Each time

.
is pressed, the display changes in the following order:

Type A: Track no./Elapsed time → CD title → Track name.
Type B and C: Track title → Track name/Artist name → Track name/
Elapsed time.

Silencing a sound (type A only)
→P. 280

288

3-2. Using the audio system

■ Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding

for 1 second

or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If

is pressed for 1 second or more again or has not been pressed for

6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■ Error messages
“CD CHECK”: This indicates a problem either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.

press

. Contact your

Toyota dealer if the CD still cannot be played
back.
■ Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration.

CDs with copy-protect features may not be used.
■ CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.
■ If CDs are left inside the CD player or in the ejected position for
extended periods
CDs may be damaged and may not play properly.

289

Interior features

“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high temperature inside the player. Wait for a while and then

3-2. Using the audio system

■ Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.

NOTICE
■ CDs and adapters that cannot be used
Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
● CDs that have a diameter that is not 4.7
in. (12 cm)

● Low-quality and deformed CDs

290

3-2. Using the audio system

NOTICE
● CDs with a transparent or translucent
recording area

● CDs that have had tape, stickers or CDR labels attached to them, or that have
had the label peeled off
3

Failure to follow the precautions below may result in serious damage to the
CDs or the player itself.
● Do not insert anything other than CDs into the CD slot.
● Do not apply oil to the CD player.
● Store CDs away from direct sunlight.
● Never try to disassemble any part of the CD player.
● Do not insert more than one CD at a
time.

291

Interior features

■ CD player precautions

3-2. Using the audio system

Playing back MP3 and WMA discs
Type A
Power

Volume

CD eject

Reverse

Fast-forward
Displaying text message

Search playback

Mute

CD slot

File selection
Playback

Folder selection

Repeat play
File selection

Random playback

Type B and C
Power

Selecting a file
Displaying text
Searching playback
messages
CD load
Selector buttons
CD eject
(type C only)

Volume

Selecting a
folder and file

Selecting a file/
fast-forwarding
and rewinding

Playback/pause
Playback

292

3-2. Using the audio system

Loading and ejecting MP3 and WMA discs
→P. 284
Selecting MP3 and WMA discs (type B with a CD changer and type C)
→P. 287
Selecting and scanning a folder
■ Selecting folders one at a time
Press “∧” or “∨” on

to select the desired folder.

STEP 1

Press and hold

Interior features

■ Scanning the first file of all the folders
until you hear a beep.

The first ten seconds of the first file in each folder will be played.
STEP 2

When the desired folder is reached, press

again.

■ Returning to the first folder
Press and hold “∨” on

until you hear a beep.

Selecting and scanning files
■ Selecting one file at a time
Turn

, or press “∧” or “∨” on

to select the

desired file.
■ Selecting the desired file by cueing the files in the folder
Press

When the desired file is reached, press

once again.
293

3-2. Using the audio system

Fast-forwarding and reversing files

To fast-forward or reverse, press and hold “∧” or “∨” on

Playing and pausing files (type B and C)
Press

Random playback
■ Playing files from a particular folder in random order
Press

(RAND) or

(RDM).

To cancel, press the button once more (type A and type B without a CD
changer), or twice more (type B with a CD changer and type C).

■ Playing all of the files on a disc in random order
Type A
Press and hold

(RAND) until you hear a beep.

To cancel, press the button again.

Type B and C
Press

(RDM) twice.

To cancel, press the button again.

294

3-2. Using the audio system

Repeat play
■ Repeating a file
Press

(RPT) or

(RPT).

To cancel, press the button once more (type A and type B without a CD
changer), or twice more (type B with a CD changer and type C).

■ Repeating all of the files on a folder
Type A
Press and hold

(RPT) until you hear a beep.

To cancel, press the button again.

Type B and C
Press

(RPT) twice.

■ Repeating all of the files in a disc (type B with a CD changer
and type C)
Press

(RPT) three times.

To cancel, press the same button again.

Switching the display
Press
Each time

.
is pressed, the display changes in the following order:

Type A: Folder no./File no./Elapsed time → Folder name → File name →
Album title (MP3 only) → Track title → Artist name.
Type B and C: Track title → Track title/Artist name → Track title/Album
name (MP3 only) → Track title/Elapsed time.

Silencing a sound (type A only)
→P. 280
295

Interior features

To cancel, press the button once more (type A and type B without a CD
changer), or twice more (type B with a CD changer and type C).

3-2. Using the audio system

■ Display (type A only)
→P. 289
■ Error messages
“CD CHECK”: This indicates a problem either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.
“NO MUSIC”: This indicates that MP3/WMA files are not included in the CD.
“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high temperature inside the player. Wait for a while and then
press

. Contact your

Toyota dealer if the CD still cannot be played.
■ Discs that can be used
→P. 289
■ CD player protection feature
→P. 289
■ If CDs are left inside the CD player or in the ejected position for
extended periods
→P. 289
■ Lens cleaners
→P. 290

296

3-2. Using the audio system

■ MP3 and WMA files
MP3 (MPEG Audio LAYER3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.
WMA (Windows Media TM Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
There is a limit to the MP3 and WMA file standards that can be used and to
the media/formats on which the files are recorded.
● MP3 file compatibility

• Compatible standards
WMA Ver. 7, 8, 9
• Compatible sampling frequencies
32, 44.1, 48 (kHz)
• Compatible bit rates (only compatible with 2-channel playback)
Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps)
Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)
● Compatible media
Media that can be used for MP3 and WMA playback are CD-Rs and CDRWs.
Playback in some instances may not be possible, depending on the status
of the CD-R or CD-RW. Playback may not be possible or the audio may
jump if the disc is scratched or marked with fingerprints.

297

Interior features

• Compatible standards
MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)
• Compatible sampling frequencies
MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)
• Compatible bit rates (compatible with VBR)
MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps)
MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps)
• Compatible channel modes: stereo, joint stereo, dual channel and
monaural
● WMA file compatibility

3-2. Using the audio system

● Compatible disc formats
The following disc formats can be used.
• Disc formats: CD-ROM Mode 1 and Mode 2
CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)
MP3 and WMA files written in any format other than those listed above
may not play correctly, and their file names and folder names may not
be displayed correctly.
Items related to standards and limitations are as follows.
• Maximum directory hierarchy: 8 levels
• Maximum length of folder names/file names: 32 characters
• Maximum number of folders: 192 (including the root)
• Maximum number of files per disc: 255
● File names
The only files that can be recognized as MP3/WMA and played are those
with the extension .mp3 or .wma.
● Multi-sessions
As the audio system is compatible with multi-sessions, it is possible to play
discs that contain MP3 and WMA files. However, only the first session can
be played.
● ID3 and WMA tags
ID3 tags can be added to MP3 files, making it possible to record the track
title, artist name, etc.
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags.
(The number of characters is based on ID3 Ver. 1.0 and 1.1.)
WMA tags can be added to WMA files, making it possible to record the
track title and artist name in the same way as with ID3 tags.
● MP3 and WMA playback
When a disc containing MP3 or WMA files is inserted, all files on the disc
are first checked. Once the file check is finished, the first MP3 or WMA file
is played. To make the file check finish more quickly, we recommend you
do not write in any files other than MP3 or WMA files or create any unnecessary folders.
If the discs contain a mixture of music data and MP3 or WMA format data,
only music data can be played.

298

3-2. Using the audio system

● Extensions
If the file extensions .mp3 and .wma are used for files other than MP3 and
WMA files, they will be mistakenly recognized and played as MP3 and
WMA files. This may result in large amounts of interference and damage
to the speakers.
● Playback

NOTICE
■ CDs and adapters that cannot be used
→P. 290
■ CD player precautions
→P. 291

299

Interior features

• To play MP3 file with steady sound quality, we recommend a fixed bit
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.
• CD-R or CD-RW playback may not be possible in some instances,
depending on the characteristics of the disc.
• There is a wide variety of freeware and other encoding software for
MP3 and WMA files on the market, and depending on the status of the
encoding and the file format, poor sound quality or noise at the start of
playback may result. In some cases, playback may not be possible at
all.
• When files other than MP3 or WMA files are recorded on a disc, it may
take more time to recognize the disc and in some cases, playback may
not be possible at all.
• Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S. and other countries.

3-2. Using the audio system

Operating an iPod∗

Connecting an iPod enables you to enjoy music from the vehicle
speakers.

■ Connecting an iPod
STEP 1

Open the cover and connect an iPod using an iPod cable.
Turn on the power of the iPod if it is not turned on.

Vehicles without seat heater

Vehicles with seat heater

∗: If equipped
300

3-2. Using the audio system

Press

STEP 2

■ Control panel
Power

Volume

Selector knob
3

Displaying text
messages

Selecting a track/
fast-forwarding
and rewinding

Interior features

Selector buttons

Playback/pause
Playback

301

3-2. Using the audio system

Selecting a play mode
STEP 1

Press

(BROWSE) to select iPod menu mode.

STEP 2

Press

that corresponds to the desired play mode.

Pressing

(MORE) to change to the second selection list.

■ Play mode list
Play mode

First
selection

Second
selection

PLIST

Playlist
select

Songs
select

ARTIST

Artist select

Albums
select

ALBUM

Albums
select

Songs
select

GENRE

Genre select

Artists select

SONGS

Songs
select

PODCST

Third
selection

Fourth
selection

Songs
select

Albums
select

Songs
select

Albums
select

Songs
select

COMPSR

Composers
select

Albums
select

Songs
select

BOOK

Songs
select

Depending on the model, the name of your iPod may be displayed at
the top of the list.

302

3-2. Using the audio system

■ Selecting a list
STEP 1

Turn

STEP 2

Press

STEP 3

Repeat the same procedure to select the desired song name.

to display the first selection list.

to select the desired item.

To return to the previous selection list, press

(

Selecting songs from a song list
3
STEP 1

Press

(LIST).

STEP 2

Turn

Pressing

Interior features

The current playlist is displayed.

to select the desired song.

returns the screen from list display to the previous

screen.

303

3-2. Using the audio system

Selecting songs

Turn

or press “∧” or “∨” on

to select the desired song.

Playing and pausing songs
Press

Fast-forwarding and rewinding songs

Press and hold “∧” or “∨” on

Shuffle playback
■ Playing songs from one playlist or album in random order
Press

(RDM).

To cancel, press the button twice.

■ Playing songs from all the playlists or albums in random order
Press

(RDM) twice.

To cancel, press the button again.

Repeat play
Press

(RPT).

To cancel, press the button again.
Even when the repeat play option has not been selected, playback will
automatically continue from the first song in the current play list once the
last song has ended.

304

3-2. Using the audio system

Switching the display
Press

Each time

is pressed, the display changes in the following order:

Track title → Track title/Artist name → Track title/Album name → Track
title/Elapsed time
■ About iPod
● Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
● iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

■ iPod functions

● Depending on the iPod that is connected to the system, certain functions
may not be available. Disconnecting the device and reconnecting it once
again may resolve some malfunctions.
■ iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner's Manual.
■ Error messages
“iPod ERROR”:

This indicates a problem in the iPod, inside the
USB box or the connection between them.

“NO SONGS”:

This indicates that there is no music data in the
iPod.

“UPDATE YOUR iPod”: This indicates that the version of the iPod is not
compatible.

305

Interior features

● When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.

3-2. Using the audio system

■ Compatible models
Model

Generation

Software version

iPod

5th generation

Ver. 1.2.0 or higher

iPod nano

1st generation

Ver. 1.3.0 or higher

2nd generation

Ver. 1.1.2 or higher

3rd generation

Ver. 1.0.0 or higher

iPod touch

1st generation

Ver. 1.1.0 or higher

iPod classic

1st generation

Ver. 1.0.0 or higher

Depending on differences between models or software version etc., some
models listed above might be incompatible with this system.
iPod 4th generation and earlier models are not compatible with this system.
iPhone, iPod mini, iPod shuffle and iPod photo are not compatible with this
system.
Items related to standards and limitations are as follows:
● Maximum number of lists in a device: 9999
● Maximum number of songs in a device: 65025
● Maximum number of songs per list: 65025

CAUTION
■ Caution while driving
Do not connect the iPod or operate the controls.

NOTICE
■ To prevent damage to iPod
● Do not leave the iPod in the vehicle. The temperature inside may become
high, resulting in damage to the player.
● Do not push down on or apply unnecessary pressure to the iPod while it is
connected as this may damage the iPod or its terminal.
● Do not insert foreign objects into the port as this may damage the iPod or
its terminal.
306

3-2. Using the audio system

Operating a USB memory∗
Connecting a USB memory enables you to enjoy music from the
vehicle speakers.

■ Connecting a USB memory
STEP 1

Open the cover and connect a USB memory.
Turn on the power of the USB memory if it is not turned on.

Vehicles without seat heater

Interior features

Vehicles with seat heater

∗: If equipped
307

3-2. Using the audio system

Press

STEP 2

■ Control panel
Power

Selector knob

Volume

Displaying text
messages

Searching
playback
Selector buttons

Selecting a track/
fast-forwarding
and rewinding

Selecting a
folder and file
Playback/pause
Playback

308

3-2. Using the audio system

Selecting and scanning a folder
■ Selecting a folder
Press “∧” or “∨” on

to select the desired folder.

■ Returning to the first file of the first folder
Press and hold “∨” on

until you hear a beep.

■ Scanning the first file of all the folders
STEP 1

Press and hold

until you hear a beep.

STEP 2

When the desired folder is reached, press

Interior features

The first ten seconds of the first file in each folder will be played.

again.

Selecting and scanning files
■ Selecting a file
Turn

or press “∧” or “∨” on

to select the desired file.

■ Scanning the files in a folder
Press

The first ten seconds of each file will be played.
To cancel, press

again.

When the desired file is reached, press

again.

Playing and pausing files
Press

.
309

3-2. Using the audio system

Fast-forwarding and rewinding files

Press and hold “∧” or “∨” on

Random playback
■ Playing files from a folder in random order
Press

(RDM).

To cancel, press the button twice.

■ Playing all the files from a USB memory in random order
Press

(RDM) twice.

To cancel, press the button again.

Repeat play
■ Repeating a file
Press

(RPT).

To cancel, press the button twice.

■ Repeating all the files in a folder
Press

(RPT) twice.

To cancel, press the button again.

Switching the display
Press
Each time

.
is pressed, the display changes in the following order:

Track title → Track title/Artist name → Track title/Album name → Track
title/Elapsed time

310

3-2. Using the audio system

■ USB memory functions
Depending on the USB memory that is connected to the system, certain
functions may not be available. Disconnecting the device and reconnecting it
once again may resolve some malfunctions.
■ Error messages
“USB ERROR”: This indicates a problem either in the USB memory or
inside the USB box or connection between them.
“NO SUPPORT”: This indicates that no MP3/WMA files are included in the
USB memory.
■ USB memory
● Compatible device

USB memory that can be used for MP3 and WMA playback.
Depending on the type of USB device, playback may not be possible.
The following device formats can be used:
• USB communication formats: USB2.0 FS (12 mbps)
• File formats: FAT16/32 (Windows)
• Correspondence class: Mass storage class
MP3 and WMA files written in any format other than those listed above
may not play correctly, and their file names and folder names may not
be displayed correctly.
Items related to standards and limitations are as follows:
•
•
•
•

Maximum directory hierarchy: 8 levels
Maximum number of folder in device: 999 (including the root)
Maximum number of files in device: 65025
Maximum number of files per folder: 255

311

Interior features

● Compatible device formats

3-2. Using the audio system

● MP3 and WMA files
MP3 (MPEG Audio LAYER 3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size using
MP3 compression.
WMA (Windows MediaTM Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
There is a limit to the MP3 and WMA file standards that can be used and to
the media/formats on which the files are recorded.
● MP3 file compatibility
• Compatible standards
MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III,
MPEG2.5)
• Compatible sampling frequencies
MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz)
MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz)
MPEG2.5: 8, 11.025, 12 (kHz)
• Compatible bit rates (compatible with VBR)
MPEG1 AUDIO LAYERII, III: 32-320 (kbps)
MPEG2 AUDIO LAYERII, III: 32-160 (kbps)
MPEG2.5: 32-160 (kbps)
• Compatible channel modes: stereo, joint stereo, dual channel and
monaural
● WMA file compatibility
• Compatible standards
WMA Ver. 9
• Compatible sampling frequencies
HIGH PROFILE 32, 44.1, 48 (kHz)
• Compatible bit rates
HIGH PROFILE 32-320 (kbps, VBR)
● File names
The only files that can be recognized as MP3/WMA and played are those
with the extension .mp3 or .wma.

312

3-2. Using the audio system

● ID3 and WMA tags
ID3 tags can be added to MP3 files, making it possible to record the track
title, artist name, etc.
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.)
WMA tags can be added to WMA files, making it possible to record the
track title and artist name in the same way as with ID3 tags.
● MP3 and WMA playback
When a device containing MP3 or WMA files is plugged in, all files in the
USB memory device are first checked. Once the file check is finished, the
first MP3 or WMA file is played. To make the file check finish more quickly,
we recommend you do not write in any files other than MP3 or WMA files
or create any unnecessary folders.

● Extensions

● Playback
• To play MP3 files with steady sound quality, we recommend a fixed bit
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.
• There is a wide variety of freeware and other encoding software for
MP3 and WMA files on the market, and depending on the status of the
encoding and the file format, poor sound quality or noise at the start of
playback may result. In some cases, playback may not be possible at
all.
• Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION
■ Caution while driving
Do not use a USB memory, or connect a USB memory.

313

Interior features

If the file extensions .mp3 and .wma are used for files other than MP3 and
WMA files, they will be mistakenly recognized and played as MP3 and
WMA files. This may result in large amounts of interference and damage
to the speakers.

3-2. Using the audio system

NOTICE
■ To prevent damage to a USB memory
● Do not leave a USB memory in the vehicle. The temperature inside may
become high, resulting in damage to the player.
● Do not push down on or apply unnecessary pressure to the USB memory
while it is connected as this may damage the USB memory or its terminal.
● Do not insert foreign objects into the port as this may damage the USB
memory or its terminal.

314

3-2. Using the audio system

Optimal use of the audio system
Type A
Adjusting the sound quality and ASL

Selector buttons

Interior features

Type B and C
Adjusting the sound quality and ASL

Menu button

315

3-2. Using the audio system

Using the audio control function
■ Changing sound quality modes
Type A
Pressing

selects the mode to be changed in the following

order.
“BAS”→“TRE”→“FAD”→“BAL”→“ASL”→“RSE”*
*: Vehicles with rear seat entertainment system

Type B and C
STEP 1

Press

STEP 2

Press the

.
that corresponds to the desired mode.

“BASS”, “MID” (type C only), “TREB”, “FADE”, or “BAL”
■ Adjusting sound quality
Turning

adjusts the level.

Type A
Mode
displayed

Sound quality mode

Level

Turn to the
left

Turn to the
right

BAS

Bass*

-5 to 5

TRE

Treble*

-5 to 5

Low

High

FAD

Front/rear
volume
balance

R7 to F7

Shifts to rear

Shifts to
front

BAL

Left/right
volume
balance

L7 to R7

Shifts to left

Shifts to right

*: The sound quality level is adjusted individually in each radio mode or
CD mode.
316

3-2. Using the audio system

Type B and C
Mode
displayed

Sound quality mode

Level

Turn to the
left

Turn to the
right

BASS

Bass*

-5 to 5

MID

Mid-range*
(type C only)

-5 to 5

Low

High

TREB

Treble*

-5 to 5

FADE

Front/rear
volume
balance

F7 to R7

Shifts to rear

Shifts to
front

BAL

Left/right
volume
balance

L7 to R7

Shifts to left

Shifts to right

■ Adjusting the Automatic Sound Levelizer (ASL)
Type A
When “ASL” is selected, turning

to the right changes the

amount of “ASL” in the order of “LOW”, “MID” and “HIGH”.
Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehicle speed.

317

Interior features

*: The sound quality level is adjusted individually in each audio
mode.

3-2. Using the audio system

Type B and C
STEP 1

Press

STEP 2

Press

(MORE).

STEP 3

Press

(ASL).

STEP 4

Press the

that corresponds to the desired mode.

Type B: “LOW”, “MID”, “HIGH”, or “OFF”
Type C: “ON” or “OFF”
ASL automatically adjusts the volume and tone quality according
to vehicle speed.

■ Setting the number of preset pages (type B and C)
The number of preset pages desired can be set from 1 to 6. The initial
setting is 6 pages.
STEP 1

Press

STEP 2

Press

(MORE).

STEP 3

Press

(PRESET).

STEP 4

Press the

that corresponds to the desired number of

preset pages.
■ Language settings (type B and C)
→P. 275

318

3-2. Using the audio system

Using the AUX port
This port can be used to connect a portable audio device and listen
to it through the vehicle’s speakers.
STEP 1

Open the cover and connect the portable audio device.

Vehicles without seat heater (type A)

Interior features

Vehicles without seat heater (type B and C)

Vehicles with seat heater

319

3-2. Using the audio system

Type A
STEP 2

Press

Type B and C
STEP 2

Press

■ Operating portable audio devices connected to the audio system
The volume can be adjusted using the vehicle's audio controls. All other
adjustments must be made on the portable audio device itself.
■ When using a portable audio device connected to the power outlet
Noise may occur during playback. Use the power source of the portable
audio device.

320

3-2. Using the audio system

Using the steering wheel audio switches∗
Some audio features can be controlled using the switches on the
steering wheel.

Volume
Radio mode: Selects radio
stations
CD mode: Selects tracks,
files (MP3 and WMA) and
discs (type C only)
iPod mode: Selects songs
USB memory mode:
Selects files and folders

Turns the power on, selects
audio source

Turning on the power
Press

when the audio system is turned off.

The audio system can be turned off by holding
a beep.

down until you hear

∗: If equipped
321

Interior features

Bluetooth® audio mode:
Selects tracks and
albums

3-2. Using the audio system

Changing the audio source
Press
when the audio system is turned on. The audio source
changes as follows each time
is pressed.
Type A
FM→CD→AUX→AM

Type B and C
FM→SAT→CD (type B only)→CD changer (with a CD changer)
→Bluetooth® Audio→AUX→USB/iPod→AM

Adjusting the volume
Press “+” on
volume.
Press and hold

to increase the volume and “-” to decrease the
to continue increasing or decreasing the volume.

Selecting a radio station
STEP 1

Press

STEP 2

Press “∧” or “∨” on

to select radio mode.
to select a preset station.

To scan for receivable stations, press and hold
a beep.

until you hear

Selecting a track/file or song
STEP 1

Press
to select CD, iPod, USB memory or Bluetooth®
audio mode.

STEP 2

Press “∧” or “∨” on
song.

to select the desired track/file or

Selecting a folder or album
to select CD, USB memory or Bluetooth® audio

STEP 1

Press
mode.

STEP 2

Press and hold “∧” or “∨” on

322

until you hear a beep.

3-2. Using the audio system

Selecting a disc in the CD player (CD player with changer only)
STEP 1

Press

STEP 2

Press and hold “∧” or “∨” on

to select CD mode.
until you hear a beep.

CAUTION
■ To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.

Interior features
323

3-3. Using the Bluetooth® audio system

Bluetooth® audio system∗

The Bluetooth® audio system enables you to enjoy music played on
a portable digital audio player (portable player) from the vehicle
speakers via wireless communication.
This audio system supports Bluetooth®, a wireless data system
capable of playing portable audio music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system will not function.
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.
Title
®

Page

Using the Bluetooth audio system

P. 327

Operating a Bluetooth® enabled portable player

P. 332

Setting up a

Bluetooth®

enabled portable player

Bluetooth audio system setup

P. 334
P. 339

■ Conditions under which the system will not operate
● If using a portable player that does not support Bluetooth®
● If the portable player is switched off
● If the portable player is not connected
● If the portable player’s battery is low
● If the portable player is behind the seat or in the glove box or console box
● If metal is covering or touching the portable player

∗: If equipped
324

3-3. Using the Bluetooth® audio system

■ When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improperly accessed. (→P. 364)
■ About Bluetooth®
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

■ Compatible models

● Bluetooth® specifications:
Ver. 1.2
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.
1.3 or higher recommended)
Portable players must correspond to the above specifications in order to be
connected to the Bluetooth® audio system. However, please note that some
functions may be limited depending on the type of portable player.
■ Certification for the Bluetooth® audio system
FCC ID: ACJ932C5ZZZ035
IC ID: 216J-C5ZZZ035
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

325

Interior features

● Following Profiles:

3-3. Using the Bluetooth® audio system

CAUTION
■ FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Radio Frequency Radiation Exposure. This equipment complies with FCC/
IC radiation exposure limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that
it should be installed and operated with at least 7.9 in. (20 cm) and more
between the radiator and person’s body (excluding extremities: hands,
wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
■ Caution while driving
Do not connect portable players or operate the controls.

NOTICE
■ To prevent damage to portable players
Do not leave portable players in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the player.

326

3-3. Using the Bluetooth® audio system

Using the Bluetooth® audio system
■ Audio unit
Display
Track title, Artist name,
Album name, Elapsed time,
“Streaming Audio”, etc. is
displayed.
Selects items such as menu
and number
Turn: Selects an item
Press: Inputs the selected
item
Bluetooth-Audio
tion condition

connec-

■ Microphone

327

Interior features

If “BT” is not displayed, the
Bluetooth® audio system
cannot be used.

3-3. Using the Bluetooth® audio system

Operating the system using voice commands
By following voice guidance instructions output from the speaker,
voice commands enable the operation of the Bluetooth® audio system without the need to check the display or operate

■ Operation procedure when using voice commands
Press the talk switch and follow voice guidance instructions.
■ Auxiliary commands when using voice commands
The following auxiliary commands can be used when operating the
system using a voice command:
“Cancel”: Exits the Bluetooth® audio setup
“Repeat”: Repeats the previous voice guidance instruction
“Go back”: Returns to the previous procedure
“Help”: Reads aloud the function summary if a help comment is
registered for the selected function

328

3-3. Using the Bluetooth® audio system

Using the Bluetooth® audio system for the first time
Before using the Bluetooth® audio system, it is necessary to register
a Bluetooth® enabled portable player in the system. Follow the procedure below to register (pair) a portable player:
STEP 1

Press and hold

STEP 2

Press

until “BT AUDIO” is displayed.

(SETUP).

The introductory guidance and portable player name registration
instructions are heard.
STEP 3

Select “Pair Audio Players (Pair audio player)” using a voice
3

command or

, and say the name to

be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
STEP 5

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction
for inputting the passkey into the portable player is heard.

329

Interior features

STEP 4

3-3. Using the Bluetooth® audio system

STEP 6

Input the passkey into the portable player.
Refer to the manual that comes with the portable player for the operation of the portable player.

Guidance for registration completion is heard.
If the portable player has a Bluetooth® phone, the phone can be registered at the same time. (→P. 347)
Menu list of the Bluetooth® audio system

First menu

Second
menu

BT Audio
Setup
(BT audio
setup)
Setup
(Setup)

System
Setup

Third menu

Operation details

Pair Audio
Players (Pair
audio player)

Registering a portable player

Select Audio
Player

Selecting a portable player to
be used

Change Name

Changing the registered
name of a portable player

List Audio
Players

Listing the registered portable players

Set Passkey

Changing the passkey

Delete Audio
Player

Deleting a registered portable player

Guidance Volume

Setting voice guidance volume

Device Name

Displaying the Bluetooth®
device address and name

Reset Setting

Initializing the system

“BT Audio Setup” can be canceled by pressing the on-hook switch or
saying the voice command, “Cancel”.

330

3-3. Using the Bluetooth® audio system

■ When using a voice command
For numbers, say a combination of single digits from zero to nine.
Say the command correctly and clearly.
■ Situations where the system may not recognize your voice
● When driving on rough roads
● When driving at high speeds
● When air is blowing out of the vents onto the microphone
● When the air conditioning fan emits a loud noise
■ Operations that cannot be performed while driving
3

● Operating the system with

Interior features

● Registering a portable player to the system
■ Changing the passkey
→P. 337

331

3-3. Using the Bluetooth® audio system

Operating a Bluetooth® enabled portable player

Power

Volume

Selector knob
Displaying text
messages

Fast-forwarding
and reversing

Selecting tracks
Playback/pause
Playback

Selecting an album

Press “∨” or “∧” on

Selecting tracks

Press “∧” or “∨” on

Playing and pausing tracks
Press

332

3-3. Using the Bluetooth® audio system

Fast-forwarding and reversing tracks

Press and hold “∧” or “∨” on

Switching the display
Press
Each time

.
is pressed, the display changes in the following order:

Track title → Track title/Artist name → Track title/Album name → Track
title/Elapsed time

Using the steering wheel audio switches

■ Bluetooth® audio system functions
Depending on the portable player that is connected to the system, certain
functions may not be available.

333

Interior features

→P. 321

3-3. Using the Bluetooth® audio system

Setting up a Bluetooth® enabled portable player
Registering a portable player in the Bluetooth® audio system allows
the system to function. The following functions can be used for registered portable players:

■ Functions and operation procedures
STEP 1

Press and hold

STEP 2

Press

STEP 3

Select one of the following functions using a voice command or

until “BT AUDIO” is displayed.

(SETUP).

● Registering a portable player
“Pair Audio Players (Pair audio player)”
● Selecting a portable player to be used
“Select Audio Player”
● Changing the registered name of a portable player
“Change Name”
● Listing the registered portable players
“List Audio Players”
● Changing the passkey
“Set Passkey”
● Deleting a registered portable player
“Delete Audio Player”

334

3-3. Using the Bluetooth® audio system

Registering a portable player
Select “Pair Audio Players (Pair audio player)” using a voice command or

, and perform the procedure for registering a portable

player. (→P. 329)
Selecting a portable player to be used
STEP 1

Select “Select Audio Player” using a voice command or
.
3

STEP 2

:
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the
name of the desired portable player is read aloud, press the
talk switch.

335

Interior features

Select the portable player to be used by either of the following
methods, and select “Confirm” using a voice command or

3-3. Using the Bluetooth® audio system

STEP 3

Press the talk switch and say “From car” or “From audio”, and
select “Confirm” using a voice command or

Vehicles with smart key system: If “From car” is selected, the portable player will be automatically connected whenever the “ENGINE
START STOP” switch is in either ACCESSORY or IGNITION ON
mode.
Vehicles without smart key system: If “From car” is selected, the portable player will be automatically connected whenever the engine
switch is in either the “ACC” or “ON” position.

Changing the registered name of a portable player

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the portable player to be changed by
either of the following methods, and select “Confirm” using a
voice command or

a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the
name of the desired portable player is read aloud, press the
talk switch.
STEP 3

Press the talk switch or select “Record Name” using
and say the new name.

STEP 4

336

Select “Confirm” using a voice command or

3-3. Using the Bluetooth® audio system

Listing the registered portable players

Select “List Audio Players” using a voice command or

. The

list of registered portable players will be read aloud.
When listing is complete, the system returns to “BT Audio Setup”.
Pressing the talk switch while the name of a portable player is being
read aloud selects the portable player, and the following functions will
become available:
● Selecting a portable player: “Select Audio Player”
● Changing a registered name: “Change Name”

● Deleting a portable player: “Delete Audio Player”
Interior features

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select
“Confirm” using a voice command or

STEP 3

When the entire number to be registered as a passkey has
been input, press

again.

337

3-3. Using the Bluetooth® audio system

Deleting a registered portable player
STEP 1

Select “Delete Audio Player” using a voice command or
.

STEP 2

Select the portable player to be deleted by either of the following methods and select “Confirm” using a voice command or
:
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the
name of the desired portable player is read aloud, press the
talk switch.

If the portable player to be deleted is paired as a Bluetooth® phone,
the registration of the mobile phone can be deleted at the same time.
A voice guidance instruction to delete a mobile phone is heard.
STEP 3

Select “Confirm” using a voice command or

■ The number of portable players that can be registered
Up to 2 portable players can be registered in the system.

338

3-3. Using the Bluetooth® audio system

Bluetooth® audio system setup
■ System setup items and operation procedures
→P. 362

Interior features
339

3-4. Using the hands-free phone system (for cellular phone)

Hands-free phone system (for cellular phone) features∗
This system supports Bluetooth®, which allows you to make or
receive calls without using cables to connect a cellular phone and
the system, and without operating the cellular phone.
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.

■ Hands-free system quick guide
STEP 1

Setting a cellular phone. (→P. 344)

STEP 2

Adding an entry to the phonebook (Up to 20 names can be
stored). (→P. 366)

STEP 3

Dialing by inputting a name. (→P. 354)

∗: If equipped
340

3-4. Using the hands-free phone system (for cellular phone)

Title

Page

Using the hands-free phone system
■ Operating the system using a voice
command
■ Using the hands-free phone system for
the first time
■ Menu list of the hands-free phone
system

P. 344

Making a phone call
■ Dialing by inputting a number
■ Dialing by inputting a name
■ Speed dialing
■ When receiving a phone call
■ Transferring a phone call
■ Using the call history

P. 353

Setting a cellular phone
■ Registering a cellular phone
■ Selecting a cellular phone to be used
■ Changing a registered name
■ Listing the registered cellular phones
■ Deleting a cellular phone
■ Changing the passkey
■ Turning the hands-free phone
automatic connection on/off

P. 357

Security and system setup
■ Setting or changing the PIN
■ Locking or unlocking the phone book
■ Setting voice guidance volume
■ Initialization

P. 362

Using the phone book
■ Adding a new phone number
■ Setting speed dials
■ Changing a registered name
■ Deleting registered data
■ Deleting speed dials
■ Listing the registered data

P. 366

Interior features
341

3-4. Using the hands-free phone system (for cellular phone)

■ Conditions under which the system will not operate
● If using a cellular phone that does not support Bluetooth®
● If the cellular phone is switched off
● If you are outside service range
● If the cellular phone is not connected
● If the cellular phone's battery is low
● If the cellular phone is behind the seat or in the glove box or console box
● If metal is covering or touching the cellular phone
■ When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improperly accessed.
■ Required profiles for the cellular phone
● HFP (Hands Free Profile) Ver. 1.0
● OPP (Object Push Profile) Ver. 1.1
■ About Bluetooth®
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

■ Certification for the hands-free phone system
FCC ID: ACJ932C5ZZZ035
IC ID: 216J-C5ZZZ035
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

342

3-4. Using the hands-free phone system (for cellular phone)

■ Caution while driving
Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE
■ To prevent damage to a cellular phone
Do not leave a cellular phone in the vehicle. The temperature inside may
become high resulting in damage to the phone.

343

Interior features

This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.

3-4. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system∗
■ Audio unit

Display
A message, name, phone
number, etc. is displayed.
Lower-case characters and
special characters, such as
an umlaut, cannot be displayed.

Selects speed dials
Selects items such as menu
or number
Turn: Selects an item
Press: Inputs the selected
item
Bluetooth® connection condition and reception level
If “BT” is not displayed, the
hands-free phone system
cannot be used.

∗: If equipped
344

3-4. Using the hands-free phone system (for cellular phone)

■ Steering wheel telephone switches
Volume
The voice guidance volume
cannot be adjusted by using
this switch.

On-hook switch
Turns the hands-free system off/ends a call/refuses a
call
Off-hook switch
Turns the hands-free system on/starts a call

■ Microphone

345

Interior features

Talk switch
Turns the voice command
system on (press)/turns the
voice command system off
(press and hold)

3-4. Using the hands-free phone system (for cellular phone)

Operating the system using a voice command
By following voice guidance instructions output from the speaker,
voice commands enable the operation of the hands-free phone system without the need to check the display or operate

■ Operation procedure when using a voice command
Press the talk switch and follow voice guidance instructions.
■ Auxiliary commands when using a voice command
The following auxiliary commands can be used when operating the
system using a voice command:
“Cancel”: Exits the hands-free phone system
“Repeat”: Repeats the previous voice guidance instruction
“Go back”: Returns to the previous procedure
“Help”: Reads aloud the function summary if a help comment is
registered for the selected function

346

3-4. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to register
a cellular phone in the system. The phone registration mode will be
entered automatically when starting the system with no cellular
phone registered. Follow the procedure below to register a cellular
phone:
STEP 1

Press the off-hook switch or the talk switch.

The introductory guidance and phone name registration instructions
are heard.
Select “Pair Phone” using a voice command or

STEP 3

, and say a name to be

registered.
b. Press the talk switch and say a name to be registered.
Voice guidance instruction to confirm the input is heard.
STEP 4

Select “Confirm” using a voice command or

347

Interior features

STEP 2

3-4. Using the hands-free phone system (for cellular phone)

Registration to the hands-free phone system only
STEP 5

Select “Phone Only” using a voice command or

Registration to the hands-free phone system and Bluetooth®
audio system at the same time
STEP 5

Select “Int. Audio (Internal audio)” using a voice command or
.

STEP 6

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction
for inputting the passkey into the cellular phone is heard.
STEP 7

Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the operation of the phone.

Guidance for registration completion is heard.

348

3-4. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system
■ Normal operation
Second
menu

Third menu

CallBack
(Call
back)

Dialing a number stored in
the incoming call history

Redial

Dialing a number stored in
the outgoing call history

Dial by
Number

Dialing by inputting a number

Dial by
Name
(Dial by
name)

Dialing by inputting a name
registered in the phone book

Add Entry

Adding a new number

Change
Name

Changing a name in the
phone book

Delete
Entry

Deleting the phone book
data

Delete
Speed
Dial

Deleting a registered speed
dial

List
Names

Listing the phone book data

Speed
Dial
(Set
speed
dial)

Registering a speed dial

First menu

349

Interior features

Phonebook

Operation detail

3-4. Using the hands-free phone system (for cellular phone)

First menu

Second
menu

Security

Setup
(Setup)

Phone
Setup

System
Setup

350

Third menu

Operation detail

Set PIN

Setting a PIN code

Phonebook Lock
(Phone book
lock)

Locking the phone book

Phonebook
Unlock (Phone
book unlock)

Unlocking the phone book

Pair Phone

Registering the cellular
phone to be used

Change Phone
Name (Change
name)

Changing the registered
name of a cellular phone

Delete Phone

Deleting a registered cellular
phone

List Phones

Listing the registered cellular
phones

Select Phone

Selecting a cellular phone to
be used

Set Passkey

Changing the passkey

Handsfree
Power

Turning the Hands-free
power on/off

Guidance Volume

Setting voice guidance volume

Device Name

Displaying a device’s information

Reset Setting

Initialization

3-4. Using the hands-free phone system (for cellular phone)

■ Using a short cut key
First menu

Second menu

Operation detail

Dial “XXX (name)”

Dialing a number registered
in the phone book

Dial “XXX (number)”

Dialing the input numbers

Phone book add
entry

Adding a new number

Phone book change
name

Changing the name of a
phone number in the phone
book

Phone book delete
entry

Deleting phone book data

Phone book set
speed dial

Registering a speed dial

Phone book delete
speed dial

Deleting a speed dial

Phone book List
names

Listing the phone book data

Interior features

351

3-4. Using the hands-free phone system (for cellular phone)

■ Automatic volume adjustment
When vehicle speed reaches 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when
vehicle speed drops to 43 mph (70 km/h) or less.
■ When using a voice command
For numbers, say a combination of single digits from zero to nine, # (pound),
∗ (star), and + (plus).
Say the command correctly and clearly.
■ Situations that the system may not recognize your voice
● When driving on a rough road
● When driving at high speeds
● When air is blowing out of the vents onto the microphone
● When the air conditioning fan emits a loud noise
■ Operations that cannot be performed while driving
● Operating the system with
● Registering a cellular phone to the system
■ Changing the passkey
→P. 360

352

3-4. Using the hands-free phone system (for cellular phone)

Making a phone call
■ Making a phone call
● Dialing by inputting a number
“Dial by Number”
● Dialing by inputting a name
“Dial by Name (Dial by name)”
● Speed dialing
● Dialing a number stored in the outgoing history
“Redial”
● Dialing a number stored in the incoming history
“CallBack (Callback)”

■ Receiving a phone call
Interior features

● Answering the phone
● Refusing the call
■ Transferring a phone call
■ Using the call history
● Dialing
● Storing data in the phone book
● Deleting

Dialing by inputting a number
STEP 1

Press the talk switch and say “Dial by number”.

STEP 2

Press the talk switch and say the phone number.

353

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Dial by one of the following methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using

Dialing by inputting a name
STEP 1

Press the talk switch and say “Dial by name”.

STEP 2

Select a registered name to be input by either of the following
methods:
a. Press the talk switch and say a registered name.
b. Press the talk switch and say “List names”. Press the talk
switch while the desired name is being read aloud.

STEP 3

Dial by one of the following methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using

Speed dialing
STEP 1

Press the off-hook switch.

STEP 2

Press the preset button to which the desired number is registered.

STEP 3

Press the off-hook switch.

354

3-4. Using the hands-free phone system (for cellular phone)

When receiving a phone call
■ Answering a phone call
Press the off-hook switch.
■ Refusing a phone call
Press the on-hook switch.
Transferring a phone call
A call can be transferred between the cellular phone and system
while dialing, receiving a call, or during a call. Use one of the following methods:

a. Operate the cellular phone.

b. Press the off-hook switch*1.
c. Press the talk switch and say “Call transfer”*2.
*1

: This operation can be performed only when transferring a call
from the cellular phone to the system during a call.

*2:

While the vehicle is in motion, a call cannot be transferred from
the system to the cellular phone. Also, this operation is invalid
while dialing or receiving a call.

Using the call history
Follow the procedure below to use a number stored in the call history:
STEP 1

Press the talk switch and say “Redial” (when using a number
stored in the outgoing call history) or “Callback” (when using a
number stored in the incoming call history).

355

Interior features

Refer to the manual that comes with the cellular phone for the operation of the phone.

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Select the number by either of the following methods:
a. Say “Previous” or “Go back” until the desired number is displayed.
b. Select the desired number using

The following operations can be performed:
Dialing: Press the off-hook switch or select “Dial” using a voice
command or

Storing the number in the phone book: Select “Store” using a voice
command or

Deleting: Select “Delete” using a voice command or

■ Call history
Up to 5 numbers can be stored in each of the outgoing and incoming call history memories.
■ When talking on the phone
● Do not talk at the same time as the other party.
● Keep the volume of the incoming voice down. Otherwise, voice echo will
increase.

356

3-4. Using the hands-free phone system (for cellular phone)

Setting a cellular phone
Registering a cellular phone in the hands-free phone system allows
the system to function. The following functions can be used for registered cellular phones:

■ Functions and operation procedures
To enter the menu for each function, follow the steps below using a
voice command or

● Registering a cellular phone
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Pair Phone”
● Selecting the cellular phone to be used
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Select Phone”

● Listing the registered cellular phones
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “List Phones”
● Deleting a cellular phone
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Delete Phone”
● Changing the passkey
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Set Passkey”
● Turning the hands-free phone automatic connection on/off
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Handsfree
Power”

Registering a cellular phone

Select “Pair Phone” using a voice command or

, and perform

the procedure for registering a cellular phone. (→P. 347)
357

Interior features

● Changing a registered name
1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Change Phone
Name (Change name)”

3-4. Using the hands-free phone system (for cellular phone)

Selecting a cellular phone to be used

STEP 1

Select “Select Phone” using a voice command or

Pattern A
STEP 2

Select a cellular phone to be used by either of the following
methods, and select “Confirm” using a voice command or
:
a. Press the talk switch and say the desired phone name.
b. Press the talk switch and say “List phones”. While the name
of the desired cellular phone is being read aloud, press the
talk switch.

Pattern B
STEP 2

Select a cellular phone to be used using

Changing a registered name
STEP 1

Select “Change Phone Name (Change name)” using a voice
command or

STEP 2

Select the name of the cellular phone to be changed by either
of the following methods:
a. Press the talk switch and say the desired phone name, and
select “Confirm” using a voice command or

b. Press the talk switch and say “List phones”. While the
desired phone name is being read aloud, press the talk
switch.
c. Select the desired phone name using
358

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Press the talk switch or select “Record Name” using

and say a new name.
STEP 4

Select “Confirm” using a voice command or

Listing the registered cellular phones

Selecting “List Phones” using a voice command or

causes the

list of registered cellular phones to be read aloud.
When listing is complete, the system returns to “Phone Setup”.

• Selecting a cellular phone: “Select Phone”
• Changing a registered name: “Change Name”
• Deleting a cellular phone: “Delete Phone”

359

Interior features

Pressing the talk switch while the name of a cellular phone is being
read selects the cellular phone, and the following functions will be
available:

3-4. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete Phone” using a voice command or

STEP 2

Select a cellular phone to be deleted by either of the following
methods and select “Confirm” using a voice command or

:
a. Press the talk switch and say the name of the desired cellular phone.
b. Press the talk switch and say “List phones”. While the name
of the desired cellular phone is being read aloud, press the
talk switch.
Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select
“Confirm” using a voice command or

The number should be input 1 digit at a time.
STEP 3

When the entire number to be registered as a passkey has
been input, press

360

again.

3-4. Using the hands-free phone system (for cellular phone)

Turning the hands-free phone automatic connection on/off
■ Turning off the automatic connection
STEP 1

Select “Handsfree Power” using a voice command or

STEP 2

Select “Turn off” using a voice command or

■ Turning on the automatic connection
STEP 1

Select “Handsfree Power” using a voice command or

.
3

STEP 2

Select “Turn on” using a voice command or

.
Interior features

■ The number of cellular phones that can be registered
Up to 6 cellular phones can be registered in the system.

361

3-4. Using the hands-free phone system (for cellular phone)

Security and system setup
To enter the menu of each setting, follow the steps below:
■ Security setting items and operation procedure
● Setting or changing the PIN (Personal Identification Number)
1. “Setup (Setup)” → 2. “Security” → 3. “Set PIN”
● Locking the phone book
1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Lock
(Phone book lock)”
● Unlocking the phone book
1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Unlock
(Phone book unlock)”
■ System setup items and operation procedure
● Setting voice guidance volume
1. “Setup (Setup)” → 2. “System Setup” → 3. “Guidance Volume”
● Initialization
1. “Setup (Setup)” → 2. “System Setup” → 3. “Reset Settings”
can only be used for system setup operation.

Setting or changing the PIN
■ Setting a PIN
STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter a PIN using a voice command or

When using
362

, input the code 1 digit at a time.

3-4. Using the hands-free phone system (for cellular phone)

■ Changing the PIN
STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter the registered PIN using a voice command or

STEP 3

Enter a new PIN using a voice command or

When using

, input the code 1 digit at a time.
3

Locking or unlocking the phone book
Select “Phonebook Lock (Phone book lock)” or “Phonebook
Unlock (Phone book unlock)” using a voice command or
.
STEP 2

Input the PIN by either of the following methods and select
“Confirm” using a voice command or

a. Press the talk switch and say the registered PIN.
b. Input a new PIN using

363

Interior features

STEP 1

3-4. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Volume” using

STEP 2

Change the voice guidance volume.
To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Reset Settings” and then “Confirm” using

STEP 2

Select “Confirm” using

364

3-4. Using the hands-free phone system (for cellular phone)

■ Initialization
● The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
• Speed dials
• Registered cellular phone data
• Security code
● Once the initialization has been completed, the data cannot be restored
to its original state.
■ When the phone book is locked
The following functions cannot be used:
● Dialing by inputting a name

● Speed dialing
Interior features

● Dialing a number stored in the call history
● Using the phone book

365

3-4. Using the hands-free phone system (for cellular phone)

Using the phone book
To enter the menu of each setting, follow the steps below:
● Adding a new phone number
1. “Phonebook” → 2. “Add Entry”
● Setting speed dial
1. “Phonebook” → 2. “Speed Dial (Set speed dial)”
● Changing a registered name
1. “Phonebook” → 2. “Change Name”
● Deleting registered data
1. “Phonebook” → 2. “Delete Entry”
● Deleting speed dial
1. “Phonebook” → 2. “Delete Speed Dial”
● Listing the registered data
1. “Phonebook” → 2. “List Names”

Adding a new phone number
The following methods can be used to add a new phone number:
● Inputting a phone number by using a voice command
● Transferring data from the cellular phone
● Inputting a phone number using
● Selecting a phone number from the outgoing or incoming call history
■ Adding procedure
STEP 1

366

Select “Add Entry” using a voice command or

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Use one of the following methods to input a telephone number:

Inputting a telephone number using a voice command
STEP2-1 Select “By Voice (By voice)” using a voice command
or

STEP2-2 Press the talk switch, say the desired number, and
select “Confirm” using a voice command.
Transferring data from the cellular phone
STEP2-1 Select “By Phone” and then “Confirm” using a voice
command or

Refer to the manual that comes with the cellular phone for
the details of transferring data.

STEP2-3 Select the data to be registered by either of the following methods:
a. Say “Previous” or “Next” until the desired data is
displayed, and select “Confirm” using a voice
command.
b. Select the desired data using

367

Interior features

STEP2-2 Transfer the data from the cellular phone.

3-4. Using the hands-free phone system (for cellular phone)

Inputting a phone number using

STEP2-1 Select “Manual Input” using

STEP2-2 Input a phone number using

, and press

once again.
Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history
STEP2-1 Select “Call History” using a voice command or
.
STEP2-2 Select “Outgoing Call History (Outgoing)” or “Incoming Call History (Incoming)” using a voice command
or

STEP2-3 Select the data to be registered by either of the following methods:
a. Say “Previous” or “Go back” until the desired
data is displayed, and select “Confirm” using a
voice command.
b. Select the desired data using

368

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following
methods, and select “Confirm” using a voice command or
:
a. Press the talk switch and say the desired name.
b. Select “Record Name” using

, and say the desired

name.
STEP 4

Select “Confirm” using a voice command or

In STEP 3 , selecting “Speed Dial (Set speed dial)” instead of “Confirm” registers the newly added phone number as a speed dial.

STEP 1

Select “Speed Dial (Set speed dial)” using a voice command
or

STEP 2

Select data to be registered as a speed dial by either of the
following methods:
a. Press the talk switch, say the desired number, and select
.

“Confirm” using a voice command or

b. Press the talk switch, and say “List names”. While the
desired name is being read aloud, press the talk switch,
and select “Confirm” using a voice command or

c. Select the desired data using

369

Interior features

Setting speed dials

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Select a desired preset button, and register the data into
speed dial by either of the following methods:
a. Press the desired preset button, and select “Confirm” using
a voice command or

b. Press and hold the desired preset button.
Changing a registered name

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select a name to be changed by either of the following methods:

a. Press the talk switch, say the desired name, and select
.

“Confirm” using a voice command or

b. Press the talk switch, and say “List names”. While the
desired name is being read aloud, press the talk switch,
and select “Confirm” using a voice command or

c. Select the desired name using

STEP 3

Select “Record Name” with

STEP 4

Say a new name, and select “Confirm” using a voice command or

370

or the talk switch.

3-4. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” using a voice command or

STEP 2

Select the data to be deleted by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch, and say the name of the desired
phone number to be deleted.
b. Press the talk switch, say “List phones”. While the name of
the desired phone number is being read aloud, press the
talk switch.

STEP 1

Select “Delete Speed Dial” using a voice command or

STEP 2

Press the preset button in which the desired speed dial is registered, and select “Confirm” using a voice command or

371

Interior features

Deleting speed dials

3-4. Using the hands-free phone system (for cellular phone)

Listing the registered data
Selecting “List names” using a voice command causes a list of the
registered data to be read aloud.
When listing is complete, the system returns to “Phonebook”.
Pressing the talk switch while the desired data is being read aloud
selects the data, and the following function will become available.
•
•
•
•

Dialing: “Dial”
Changing a registered name: “Change Name”
Deleting an entry: “Delete Entry”
Setting a speed dial: “Speed Dial (Set speed dial)”

■ Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.

372

3-5. Using the interior lights

Interior lights list
Your Toyota is equipped with an illuminated entry system to assist in
entering the vehicle. Owing to the function of the system, the lights
shown in the following illustration automatically turn on/off according to the presence of the electronic key (vehicles with smart key
system), whether the doors are locked/unlocked, whether the doors
or glass hatch (if equipped) are opened/closed, the “ENGINE START
STOP” switch mode and engine switch position.

Interior features

Outer foot lights (vehicles with smart key system)
Personal/interior lights (→P. 374)
Engine switch light (vehicles without smart key system)
Front door courtesy light
Personal/interior light or interior light (→P. 374, 375)
Interior light (→P. 375)

373

3-5. Using the interior lights
Personal/interior light main switch and personal/interior lights

Personal/interior light main switch
“OFF”
The personal/interior lights and
interior light can be individually
turned on or off.

Door position
The personal/interior lights and
interior light come on when a door
or the glass hatch (if equipped) is
opened. They turn off when the
doors and glass hatch are closed.

On
The personal/interior lights and
interior light cannot be individually
turned off.

Personal/interior lights
Front
On/off
The illuminated entry system is
activated even if the light is
turned off when the personal/interior light main switch is in door
position.

374

3-5. Using the interior lights
Personal/interior lights and interior light

Center (if equipped)
On/off
The illuminated entry system is
activated even if the light is
turned off when the personal/interior light main switch is in door
position.

Interior light
Rear
Center (if equipped)

On
Off

■ To prevent battery discharge
If the lights remain on when the door is not fully closed and the personal/interior light main switch is in the door position, the lights will go off automatically
after 20 minutes.
■ Customization that can be configured at Toyota dealer
Settings (e.g. The time elapsed before lights turn off) can be changed.
(Customizable features →P. 582)

375

Interior features

The illuminated entry system is
activated even if the light is
turned off when the personal/interior light main switch is in door
position.

3-6. Using the storage features

List of storage features

Auxiliary boxes
Overhead console
Glove box
Bottle holders
Cup holders
Side table
Console box

376

3-6. Using the storage features
Glove box

CAUTION
■ Items that should not be left in the storage spaces
Do not leave glasses, lighters or spray cans in the storage spaces, as this
may cause the following when cabin temperature becomes high:
● Glasses may be deformed by heat or cracked if they come into contact
with other stored items.
● Lighters or spray cans may explode. If they come into contact with other
stored items, the lighter may catch fire or the spray can may release gas,
causing a fire hazard.

Glove box

key
key
key
sys-

Lock with the master
(vehicles without smart
system) or mechanical
(vehicles with smart key
tem)

key
key
key
sys-

Open (pull lever)
■ Power back door main switch (vehicles with power back door)
The power back door main switch is located in the glove box. (→P. 59)

CAUTION
■ Caution while driving
Keep the glove box closed.
Injuries may result in the event of an accident or sudden braking.

377

Interior features

Unlock with the master
(vehicles without smart
system) or mechanical
(vehicles with smart key
tem)

3-6. Using the storage features
Console box

Console box
Upper
Pull up the knob to release the
lock. Lift the lid.

Lower
Push down the lever.

CAUTION
■ Caution while driving
Keep the console box closed.
Injuries may result in the event of an accident or sudden braking.

378

3-6. Using the storage features
Overhead console

Overhead console
The overhead console is useful for temporarily storing sunglasses
and similar small items.
Press in the lid.

CAUTION
Interior features

■ Caution while driving
Do not leave the overhead console open while driving.
Items stored in it may fall out and cause injury.
■ Size of stored items
Do not put large items in the overhead console.
The overhead console may not be able to be shut from the conversation mirror position.
■ Maximum storage weight
Do not place any object heavier than 0.4 lb. (200 g) in it. The console may
be opened and cause injury.

379

3-6. Using the storage features
Cup holders

Cup holders
Front (type A)

Front (type B)
Lift the lid.

Console box
Pull out the cup holder.

380

3-6. Using the storage features
Cup holders

Side table
Install the side table before using
the cup holder. (→P. 387)
Removing the adapters changes
the size. (→P. 382)

Rear
Removing the adapters changes
the size. (→P. 382)

Interior features
381

3-6. Using the storage features
Cup holders

■ Adjusting size of the cup holder (front [type B], side table and rear)
Front (type B)
Remove the separator.
The separator may be removed for cleaning.

Side table
Remove the adapter.

Rear
Remove the adapter.

382

3-6. Using the storage features
Cup holders

CAUTION
■ Items unsuitable for the cup holder
Do not place anything other than cups or beverage cans in the cup holders.
Even when the lid is closed, items must not be stored in the cup holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury. If possible, cover hot drinks to prevent
burns.
■ When not in use
Front (type B) and console box cup holders: Keep the cup holders closed.
Injuries may result in the event of an accident or sudden braking.
3

Interior features
383

3-6. Using the storage features
Bottle holders

Bottle holders
Front

Rear

CAUTION
■ Items unsuitable for the bottle holder
Do not place anything other than a bottle in the bottle holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury.

NOTICE
■ When stowing a bottle
Put the cap on before stowing a bottle. Do not place open bottles in the bottle holders. The contents may spill.

384

3-6. Using the storage features
Auxiliary boxes

Auxiliary boxes
Type A
Pull up the lever.

Type B (if equipped)

Lift the lid.
Interior features
385

3-6. Using the storage features
Auxiliary boxes

Type C
Lift the lid.

■ Auxiliary box (type C)
The side table can be installed. (→P. 387)

CAUTION
■ Caution while driving
Keep the auxiliary boxes closed.
Injuries may result in the event of an accident or sudden braking.

386

3-6. Using the storage features
Side table

Side table
■ Installing the side table
Take out the side table from the
console box.

STEP 1

STEP 2

Remove the second center seat. (→P. 79)

STEP 3

Push down on the side table to
engage the rear pin locks.

■ Removing the side table
STEP 1

Take out the second center seat
from the console box.

387

Interior features

Engage the front pins of the
side table with the hooks.

3-6. Using the storage features
Side table

STEP 2

Pull the lock release lever to
remove the side table.

STEP 3

Stow the side table in the console box.

STEP 4

Push down on the end to engage
the pins in the holes and close
the console box door.
Make sure that the side table is
securely locked in position.

CAUTION
■ Caution while driving
Keep the console box closed.
Injuries may result in the event of an accident or sudden braking.

388

3-7. Other interior features

Sun visors
Forward position
Flip down.
Side position
Flip down, unhook, and
swing to the side.
Side extender
Place in side position then
slide backwards.

Interior features
389

3-7. Other interior features

Vanity mirrors
Slide the cover.
The light turns on when the
cover is opened. (Vehicles with
vanity mirror light)

NOTICE
■ To prevent the battery from being discharged (vehicles with vanity mirror light)
Do not leave the vanity lights on for extended periods while the engine is
stopped.

390

3-7. Other interior features

Clock (vehicles without multi-information display)
Adjusts the hours.
Adjusts the minutes.

■ The clock is displayed when

The engine switch is in the “ACC” or “ON” position.

Interior features
391

3-7. Other interior features

Conversation mirror
Press in the lid.
Push the lid back up half
way.

■ To use the overhead console from the conversation mirror state
Fully close the lid, then open it again. (→P. 379)

392

3-7. Other interior features

Power outlets
The power outlet can be used for the following components.

12 V: Accessories that run on less than 10 A.
120 VAC: Accessories that use less than 100 W.
■ 12 V
Type A*1

Interior features

Type B*2

393

3-7. Other interior features

Type C

Type D

■ 120 VAC*3

*1: Vehicles with seat heater
*2: Vehicles without seat heater
*3: Vehicles with rear entertainment system

394

3-7. Other interior features

■ The power outlet can be used when
12 V
Vehicles without smart key system:
The engine switch is in the “ACC” or “ON” position.
Vehicles with smart key system:
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON
mode.
120 VAC
Vehicles without smart key system:
The engine switch is in the “ON” position.
Vehicles with smart key system:
The “ENGINE START STOP” switch is in IGNITION ON mode.

Interior features
395

3-7. Other interior features

NOTICE
■ To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short circuit.
■ To prevent the fuse from being blown
12 V
Do not use an accessory that uses more than 12 V 10 A.
120 VAC
Do not use a 120 VAC appliance that requires more than 100 W.
If a 120 VAC appliance that consumes more than 100 W is used, the protection circuit will cut the power supply.
■ To prevent the battery discharge
Do not use the power outlet longer than necessary when the engine is off.
■ Appliances that may not operate properly (120 VAC)
The following 120 VAC appliances may not operate properly even if their
power consumption is under 100 W.
● Appliances with high initial peak wattage
● Measuring devices that process precise data
● Other appliances that require an extremely stable power supply

396

3-7. Other interior features

Seat heaters∗

Driver's seat

Pops the knob out
On
The indicator light comes on.

Adjusts the seat temperature
Front passenger's seat

The further you turn the knob
clockwise, the warmer the seat
becomes.

Interior features

■ The seat heaters can be used when
Vehicles without smart key system
The engine switch is in the “ON” position.
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ When not in use
Turn the knob fully counterclockwise. The indicator light turns off.
Press the knob into the recessed position.

∗: If equipped
397

3-7. Other interior features

CAUTION
■ Burns
● Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns:
•
•
•
•

Babies, small children, the elderly, the sick and the disabled
Persons with sensitive skin
Persons who are fatigued
Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
● Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature
of the seat and may lead to overheating.

NOTICE
■ To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.
■ To prevent battery discharge
Turn the switches off when the engine is not running.

398

3-7. Other interior features

Armrests
Pull the armrest down for use.

Interior features

NOTICE
■ To prevent damage to the armrest
Do not place too much strain on the armrest.

399

3-7. Other interior features

Floor mat
Use only floor mats designed specifically for vehicles of the same
model and model year as your vehicle. Fix them securely in place
onto the carpet.

Fix the floor mat in place using
the retaining hooks (clips) provided.
For details, refer to the floor
mat retention clip installation
instructions supplied with the
clips.

CAUTION
Observe the following precautions.
Failure to do so may cause the driver's floor mat to slip, possibly interfering
with the pedals while driving. An unexpectedly high speed may result or it may
become difficult to stop the vehicle, leading to a serious accident.
■ When installing the driver's floor mat
● Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
● Only use floor mats designed for the driver's seat.
● Always install the floor mat securely using the retaining hooks (clips) provided.
● Do not use two or more floor mats on top of each other.
● Do not place the floor mat bottom-side up or upside-down.
■ Before driving
● Check that the floor mat is securely
fixed in the right place with all the provided retaining hooks (clips). Be especially careful to perform this check after
cleaning the floor.
● With the engine stopped and the shift
lever in P, fully depress each pedal to
the floor to make sure it does not interfere with the floor mat.

400

3-7. Other interior features

Luggage compartment features
■ Cargo hooks
Cargo hooks are provided for
securing loose items.

■ Grocery bag hooks
3

Interior features

■ Auxiliary box
Lift the center deck board.

401

3-7. Other interior features

■ Separating the luggage compartment
The center deck board can be
used to separate the luggage
compartment.
Remove the center deck
board and insert it upright into
the groove.
The board cannot be inserted
when the luggage cover is
stowed.

■ Luggage cover (vehicles with luggage cover)
STEP 1

Hang the hooks on the hook
brackets on the second seat
seatback.
When using the luggage cover,
the third seat must be folded
down. (→P. 77)

402

3-7. Other interior features

STEP 2

Pull out the luggage cover and
engage both ends to secure it.

■ When taking out luggage through the glass hatch (vehicles with glass
hatch)
Pull the luggage cover to disengage both
ends.

STEP 2

Engage both ends of the luggage cover
with the grooves shown in the illustration
and stand the cover upright.

403

Interior features

STEP 1

3-7. Other interior features

■ Removing the luggage cover (vehicles with luggage cover)
The luggage cover can be removed by following the procedure below.
Detach the hooks.
Push in the left side of the luggage
cover while keeping hold of the right
side. Then raise the right side and pull
the luggage cover out.

■ Stowing the luggage cover (vehicles with luggage cover)
STEP 1

Remove the side deck boards and open
the center deck board.

STEP 2

Fold the flaps on top of the luggage cover
with the hooks rolled inside.

STEP 3

Place the left end of the luggage cover in
the recess on the left-hand side and then
lower the right end into the recess on the
right-hand side.

404

3-7. Other interior features

CAUTION
■ When the cargo hooks are not in use
To avoid injury, always return the cargo hooks to their positions when they
are not in use.
■ Caution while driving
Do not drive with any of the deck boards opened. Items may fall out and
cause injury.

NOTICE
■ Shopping bag hook weight capacity

Do not hang any object heavier than 4 lb. (2 kg) on shopping bag hooks.
Do not drive with the luggage cover standing upright in the grooves as the
luggage cover may fall down.
■ Before inserting the center deck board into the luggage compartment
Make sure the luggage cover is not stowed.

405

Interior features

■ While driving

3-7. Other interior features

Garage door opener∗
The garage door opener can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.
The garage door opener (HomeLink® Universal Transceiver) is manufactured under license from HomeLink®.

Programming the HomeLink® (for U.S.A. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming method below appropriate for the device.
Indicator
Buttons

■ Programming the HomeLink®
STEP 1

Point the remote control for the
device 1 to 3 in. (25 to 75 mm)
from the HomeLink® control buttons.
Keep the indicator light on the
HomeLink® in view while programming.

∗: If equipped
406

3-7. Other interior features

STEP 2

Press and hold down one of the
buttons on the HomeLink® and
the button on the transmitter.
When the indicator light on the
HomeLink® changes from a slow
to a rapid flash within 20 seconds, you can release both buttons.

STEP 3

Test the operation of
HomeLink® by pressing
newly programmed button.

the
the

STEP 4

Repeat the steps above to program another device for each of
the remaining HomeLink® buttons.

407

Interior features

If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold the programmed
HomeLink® button. The garage
door has the rolling code feature
if the indicator light (on the
HomeLink®) flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the heading “Programming a rolling code
system”.

3-7. Other interior features

■ Programming a Rolling Code system (for U.S.A. owners)
If your device is Rolling Code equipped, follow the steps under the
heading “Programming the HomeLink®” before proceeding with
the steps listed below.
STEP 1

Locate the learn button on the ceiling mounted garage door
opener motor. The exact location and color of the button may
vary by brand of garage door opener.
Refer to the operation manual supplied with the garage door opener
for the location of the learn button.

STEP 2

Press the learn button.
Following this step, you have 30 seconds in which to initiate step 3
below.

STEP 3

Press and release the vehicle’s programmed HomeLink® button twice. The garage door may open.
If the garage door opens, the programming process is complete. If
the door does not open, press and release the button a third time.
This third press and release will complete the programming process
by opening the garage door.
The ceiling mounted garage door opener motor should now recognize the HomeLink® transceiver and operate the garage door.

STEP 4

Repeat the steps above to program another rolling code system for any of the remaining HomeLink® buttons.

■ Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
STEP 1

Place your transmitter 1 to 3 in. (25 to 75 mm) away from the
surface of the HomeLink®.
Keep the indicator light on the HomeLink® in view while programming.

STEP 2
STEP 3
STEP 4

408

Press and hold the selected HomeLink® button.
Repeatedly press and release (cycle) the device’s remote
control button for two seconds each until step 4 is complete.
When the indicator light on the HomeLink® compatible transceiver starts flashing rapidly, release the buttons.

3-7. Other interior features

STEP 5

STEP 6

Test the operation of the HomeLink® by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink® buttons.

■ Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■ Reprogramming a button

The individual HomeLink® buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the programming
instructions.

Press the appropriate HomeLink® button. The HomeLink® indicator
light on the HomeLink® transceiver should turn on.
The HomeLink® continues to send a signal for up to 20 seconds as long
as the button is pressed.

Erasing the entire HomeLink® memory (all three programs)
Press and hold down the 2 outside buttons for 10 seconds (or
20 seconds depending on the
model) until the indicator light
flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink® memory.

409

Interior features

Operating the HomeLink®

3-7. Other interior features

■ Before programming
● Install a new battery in the transmitter.
● The battery side of the transmitter must be pointed away from the
HomeLink®.
■ Certification for the garage door opener
For vehicles sold in the U.S.A.
FCC ID: CB2300NHL3
FCC ID: CB2281AHL4
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
■ When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.

410

3-7. Other interior features

CAUTION
■ When programming a garage door or other remote control device
The garage door may operate, so ensure people and objects are out of danger to prevent potential harm.
■ Conforming to federal safety standards
Do not use the HomeLink® Compatible Transceiver with any garage door
opener or device that lacks safety stop and reverse features as required by
federal safety standards.
This includes any garage door that cannot detect an obstruction object. A
door or device without these features increases the risk of death or serious
injury.
3

Interior features
411

3-7. Other interior features

Compass∗

The compass on the inside rear view mirror indicates the direction in
which the vehicle is heading.

■ Operation
To turn the compass on or off,
press “AUTO”.

■ Displays and directions
Display

Direction

North

Northeast

East

Southeast

South

Southwest

West

Northwest

∗: If equipped
412

3-7. Other interior features

Calibrating the compass

If you cross over a map boundary shown in illustration, the compass will
deviate.
To obtain higher precision or perfect calibration, refer to the following.

■ Deviation calibration
STEP 1

Stop the vehicle.

STEP 2

Press “AUTO” until a number
(1 to 15) appears on the compass display.

STEP 3

Press the switch, and referring to the map above, select the
number of the zone where you are.
If the direction is displayed several seconds after adjustment, the
calibration is complete.
413

Interior features

The direction display deviates from the true direction determined by
the earth’s magnetic field. The amount of deviation varies according
to the geographic position of the vehicle.

3-7. Other interior features

■ Circling calibration
When C appears on the display,
drive the vehicle at 5 mph (8 km/h)
or less in a circle until a direction is
displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is displayed.

■ Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions:
● The vehicle is stopped immediately after turning.
● The vehicle is on an inclined surface.
● The vehicle is in a place where the earth's magnetic field is subject to
interference by artificial magnetic fields (underground car park/parking
lot, under a steel tower, between buildings, roof car park/parking lot, near
an intersection, near a large vehicle, etc.).
● The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
● The battery has been disconnected.
● A door is open.

CAUTION
■ While driving the vehicle
Do not adjust the display. Be sure to adjust the display only when the vehicle
is stopped.
■ When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the
neighborhood. Do not violate any local traffic rules while performing circling
calibration.

414

3-7. Other interior features

NOTICE
■ To avoid compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause a malfunction of the compass sensor.
■ To ensure normal operation of the compass
● Do not perform circling calibration of the compass in a place where the
earth's magnetic field is subject to interference by artificial magnetic fields.
● During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration.

Interior features
415

3-7. Other interior features

416

4-1. Maintenance and care

Cleaning and protecting the vehicle exterior
Perform the following to protect the vehicle and maintain it in prime
condition.

● Working from top to bottom, liberally apply water to the vehicle
body, wheel wells and underside of the vehicle to remove any
dirt and dust.
Wash the vehicle body using a sponge or soft cloth, such as a
chamois.
● For hard-to-remove marks, use car wash soap and rinse thoroughly with water.
● Wipe away any water.
● Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehicle
body is cool.

■ Automatic car washes
● Before washing the vehicle, do the following:
• Fold the mirrors back.
• Remove the antenna. (mast type only)
• Turn the power back door system off.
● Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
■ High pressure car washes
● Do not allow the nozzles of the car wash to come within close proximity
of the windows.
● Before using the car wash, check that the fuel filler door on your vehicle
is closed properly.

418

4-1. Maintenance and care

■ Aluminum wheels
● Remove any dirt immediately by using a neutral detergent. Do not use
hard brushes or abrasive cleaners. Do not use strong or harsh chemical
cleaners.
Use the same mild detergent and wax as used on the paint.
● Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.
● Wash detergent from the wheels immediately after use.
■ Bumpers
Do not scrub with abrasive cleaners.

CAUTION
■ Caution about the exhaust pipe
Exhaust gasses cause the exhaust pipe to become quite hot.
When washing the vehicle, be careful not to touch the pipe until it has cooled
sufficiently, as touching a hot exhaust pipe can cause burns.

Maintenance and care
419

4-1. Maintenance and care

NOTICE
■ To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.)
● Wash the vehicle immediately in the following cases:
•
•
•
•
•

After driving near the sea coast
After driving on salted roads
If you see coal tar or tree sap on the paint surface
If you see dead insects or insect droppings on the paint
After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled in dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
● If the paint is chipped or scratched, have it repaired immediately.
● To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
■ If the windshield washer nozzle become blocked
Contact your Toyota dealer. Do not try to clear it with a pin or other object.
This may damage the nozzle.
■ Cleaning the exterior lights
● Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
● Do not apply wax on the surfaces of the lights.
Wax may cause damage to the lenses.
■ Mast type antenna installation and removal precautions
● Before driving, ensure that the antenna is installed.
● When the antenna is removed, such as before entering an automatic car
wash, make sure to store it in a suitable place so as not to lose it. Also,
before driving, make sure to reinstall the antenna in its original position.
■ To prevent damage to the windshield wiper arms
When lifting the wiper arms away from the windshield, pull the driver side
wiper arm upward first, and repeat for the passenger side. When returning
the wipers to their original position, do so from the passenger side first.

420

4-1. Maintenance and care

Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle's interior and
keep it in top condition:

■ Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
■ Cleaning the leather areas
● Remove dirt and dust using a vacuum cleaner.
● Wipe any excess dirt and dust with a soft cloth dampened with
diluted detergent.
Use a diluted water solution of approximately 5% neutral wool detergent.

● Wring out any excess water from the cloth and thoroughly
wipe off all remaining traces of detergent.

■ Synthetic leather areas
● Remove loose dirt using a vacuum cleaner.
● Apply a mild soap solution to the synthetic leather.
● Allow the solution to soak in for a few minutes. Remove the
dirt and wipe off the solution with a clean, damp cloth.

421

Maintenance and care

● Wipe the surface with a dry, soft cloth to remove any remaining moisture. Allow the leather to dry in a shaded ventilated
area.

4-1. Maintenance and care

■ Caring for leather areas
Toyota recommends cleaning the interior of the vehicle at least twice a year
to maintain the quality of the vehicle's interior.
■ Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a
sponge or brush to apply the foam. Rub in overlapping circles. Do not apply
water. Excellent results are obtained by keeping the carpet as dry as possible.
■ Seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also
check the belts periodically for excessive wear, fraying or cuts.

CAUTION
■ Water in the vehicle
● Do not splash or spill liquid in the vehicle.
Doing so may cause electrical components etc. to malfunction or catch
fire.
● Do not get any of the SRS components or wiring in the vehicle interior wet.
(→P. 121)
Electrical malfunction may cause the airbags to deploy or not function
properly, resulting in death or severe injury.
■ Cleaning the interior (especially instrument panel)
Do not use polish wax or polish cleaner. The instrument panel may reflect
off the windshield, obstructing the driver’s view and leading to an accident,
resulting in death or serious injury.

422

4-1. Maintenance and care

NOTICE
■ Cleaning detergents
● Do not use organic substances such as benzene or gasoline, acidic or
alkaline solutions, dye, bleach or other detergent. Doing so may discolor
the vehicle interior or cause streaks or damage to painted surfaces.
● Do not use polish wax or polish cleaner. The instrument panel’s or other
interior part’s painted surface may be damaged.
■ Preventing damage to leather surfaces
Observe the following precautions to avoid damage to and deterioration of
leather surfaces:
● Remove any dust or dirt on leather surfaces immediately.
● Do not expose the vehicle to direct sunlight for extended periods of time.
Park the vehicle in the shade, especially during summer.
● Do not place items made of vinyl, plastic, or that contain wax on the upholstery, as they may stick to the leather surface if the vehicle interior heats
up significantly.

■ Water on the floor

■ Cleaning the inside of the rear window or left-side rear quarter window
● Do not use glass cleaner to clean the rear window or left-side rear quarter
window, as this may cause damage to the rear window defogger heater
wires or print type antenna (if equipped). Use a cloth dampened with lukewarm water to gently wipe the windows clean. Wipe the windows in
strokes running parallel to the heater wires or print type antenna (if
equipped).
● Be careful not to scratch or damage the heater wires or print type antenna
(if equipped).

423

Maintenance and care

Do not wash the vehicle floor with water.
Vehicle systems such as the audio system may be damaged if water comes
into contact with electrical components under the floor of the vehicle, and
may also cause the body to rust.

4-2. Maintenance

Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular
maintenance is essential. It is the owner’s responsibility to perform
regular checks. Toyota recommends the following maintenance.

■ General maintenance
General maintenance should be performed on a daily basis.
This can be done by yourself or by a Toyota dealer.
■ Scheduled maintenance
Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
For details about maintenance items and schedules, refer to the
“Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.

■ Do-it-yourself maintenance
You can perform some maintenance procedures yourself.
Please be aware that do-it-yourself maintenance may affect warranty coverage.
The use of Toyota Repair Manuals is recommended.
For details about warranty coverage, see the separate “Owner’s
Warranty Information Booklet” or “Owner’s Manual Supplement”.

■ Repair and replacement
It is recommended that genuine Toyota parts be used for repair to ensure
performance of each system. If non-Toyota parts are used in replacement or
if a repair shop other than a Toyota dealer performs repairs, confirm the warranty coverage.

424

4-2. Maintenance

■ Allow inspection and repairs to be performed by a Toyota dealer
● Toyota technicians are well-trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
● Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it.

CAUTION
■ Warning in handling of battery
● Engine exhaust, some of its constituents, and a wide variety of automobile
components contain or emit chemicals known to the State of California to
cause cancer and birth defects and other reproductive harm. Work in a
well ventilated area.

● Battery posts, terminals and related accessories contain lead and lead
compounds which are known to cause brain damage. Wash your hands
after handling. (→P. 450)

425

Maintenance and care

● Oils, fuels and fluids contained in vehicles as well as waste produced by
component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid
exposure and wash any affected area immediately.

4-2. Maintenance

General maintenance
Listed below are the general maintenance items that should be performed at the intervals specified in the “Scheduled Maintenance
Guide” or “Owner’s Manual Supplement”. It is recommended that
any problem you notice should be brought to the attention of your
Toyota dealer or qualified service shop for advice.

Engine compartment
Items

426

Check points

Battery

Maintenance-free.

(→P. 450)

Brake fluid

At the correct level?

(→P. 449)

Engine coolant

At the correct level?

(→P. 446)

Engine oil

At the correct level?

(→P. 442)

Exhaust system

No fumes or strange sounds?

Radiator/condenser/hoses

Not blocked with foreign matter?
(→P. 448)

Washer fluid

At the correct level?

(→P. 454)

4-2. Maintenance

Vehicle interior
Items

Check points

Accelerator pedal

• Moves smoothly (without uneven
pedal effort or catching)?

Automatic transmission “Park”
mechanism

• Can the vehicle be held securely
on an incline with the shift lever in
P?

Brake pedal

• Moves smoothly?
• Does it have appropriate clearance and correct amount of free
play?

Brakes

• Not pull to one side when
applied?
• Loss of brake effectiveness?
• Spongy feeling brake pedal?
• Pedal almost touches floor?
• Move smoothly and lock
securely?

Indicators/buzzers

• Function properly?

Lights

• Do all the lights come on?
• Headlights aimed correctly?

Parking brake

• Moves smoothly?
• Can hold the vehicle securely on
an incline?

Seat belts

• Does the seat belt system operate smoothly?
• Are the belts undamaged?

Seats

• Do the seat controls operate
properly?

Steering wheel

• Moves smoothly?
• Has correct free play?
• No strange noises?

Maintenance and care

Head restraints

427

4-2. Maintenance

Vehicle exterior
Items

Check points

Door

• Operate smoothly?

Engine hood

• The lock system works properly?

Fluid leaks

• Is there any leakage after parking?

Tire

• Inflation pressure is correct?
• Tire surfaces not worn or damaged?
• Tires rotated according to the
maintenance schedule?
• Wheel nuts are not loose?

CAUTION
■ If the engine is running
Turn the engine off and ensure that there is adequate ventilation before performing maintenance checks.

428

4-2. Maintenance

Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which
include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system.

■ If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere
in the emission control system. Your vehicle may not pass the I/
M test and may need to be repaired. Contact your Toyota dealer
to service the vehicle.
■ Your vehicle may not pass the I/M test:
● When the battery is disconnected or discharged
Readiness codes that are set during ordinary driving are
erased.
Also, depending on your driving habits, the readiness codes
may not be completely set.
4

● When the fuel tank cap is loose

■ When the malfunction indicator lamp goes off after several
driving trips
The error code in the OBD system will not be cleared unless the
vehicle is driven 40 or more times.
■ If your vehicle does not pass the I/M test
Contact your Toyota dealer to prepare the vehicle for re-testing.

429

Maintenance and care

The malfunction indicator lamp comes on as a temporary malfunction and your vehicle may not pass the I/M test.

4-3. Do-it-yourself maintenance

Do-it-yourself service precautions
If you perform maintenance yourself, be sure to follow the correct
procedures as given in these sections.
Items

Battery condition

Brake fluid level

Engine coolant level

Engine oil level

430

Parts and tools

(→P. 450)

• Warm water
• Baking soda
• Grease
• Conventional wrench
(for terminal clamp bolts)

(→P. 449)

• FMVSS No.116 DOT 3 or SAE
J1703 brake fluid
• Rag or paper towel
• Funnel (used only for adding
brake fluid)

(→P. 446)

• “Toyota Super Long Life Coolant”
or similar high quality ethylene
glycol based non-silicate, nonamine, non-nitrite and non-borate
coolant with long-life hybrid
organic acid technology.
For the U.S.A.:
“Toyota Super Long Life
Coolant” is pre-mixed with 50%
coolant and 50% deionized
water.
For Canada:
“Toyota Super Long Life
Coolant” is pre-mixed with 55%
coolant and 45% deionized
water.
• Funnel (used only for adding
engine coolant)

(→P. 442)

• “Toyota Genuine Motor Oil” or
equivalent
• Rag or paper towel, funnel
(used only for adding oil)

4-3. Do-it-yourself maintenance

Items
Fuses

Parts and tools
(→P. 476)

Radiator and condenser
(→P. 448)

• Fuse with same amperage rating
as original
⎯

Tire inflation pressure (→P. 465)

• Tire pressure gauge
• Compressed air source

Washer fluid

• Water washer fluid containing
antifreeze (for winter use)
• Funnel

(→P. 454)

Maintenance and care
431

4-3. Do-it-yourself maintenance

CAUTION
The engine compartment contains many mechanisms and fluids that may
move suddenly, become hot, or become electrically energized. To avoid death
or serious injury observe the following precautions.
■ When working on the engine compartment
● Keep hands, clothing, and tools away from the moving fan and engine
drive belt.
● Be careful not to touch the engine, radiator, exhaust manifold, etc. right
after driving as they may be hot. Oil and other fluids may also be hot.
● Do not leave anything that may burn easily, such as paper or rags, in the
engine compartment.
● Do not smoke, cause sparks or expose an open flame to fuel or the battery. Fuel and battery fumes are flammable.
● Be extremely cautious when working on the battery. It contains poisonous
and corrosive sulfuric acid.
● Take care because brake fluid can harm your hands or eyes and damage
painted surfaces.
If fluid gets on your hands or in your eyes, flush the affected area with
clean water immediately.
If you still experience discomfort, see a doctor.
● Do not touch the engine compartment when the electric cooling fan is
operating.
Vehicles without smart key system: The electric cooling fan may keep
rotating for about 3 minutes even after the engine switch is turned to the
“LOCK” position.
With the engine switch in the “ON” position, the electric cooling fan may
automatically start to run if the air conditioning is on and/or the coolant
temperature is high. Be sure the engine switch is in the “LOCK” position
when working near the electric cooling fan or radiator grille.
Vehicles with smart key system: The electric cooling fan may keep rotating
for about 3 minutes even after the “ENGINE START STOP” switch is OFF.
With the “ENGINE START STOP” switch in IGNITION ON mode, the electric cooling fan may automatically start to run if the air conditioning is on
and/or the coolant temperature is high. Be sure the “ENGINE START
STOP” switch is OFF when working near the electric cooling fan or radiator grille.
432

4-3. Do-it-yourself maintenance

CAUTION
■ Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from
getting in the eyes.

NOTICE
■ If you remove the air cleaner filter
Driving with the air cleaner filter removed may cause excessive engine wear
due to dirt in the air. Also a backfire could cause a fire in the engine compartment.

Maintenance and care
433

4-3. Do-it-yourself maintenance

Hood
Release the lock from the inside of the vehicle to open the hood.
STEP 1

Pull the hood release lever.
The hood will pop up slightly.

STEP 2

Lift the auxiliary catch lever
and lift the hood.

STEP 3

Hold the hood open by inserting the supporting rod into
either of the slots.

434

4-3. Do-it-yourself maintenance

CAUTION
■ Pre-driving check
Check that the hood is fully closed and locked.
If the hood is not locked properly, it may open while the vehicle is in motion
and cause an accident, which may result in death or serious injury.
■ After installing the support rod into the slot
Make sure the rod supports the hood securely from falling down on to your
head or body.

NOTICE
■ When closing the hood
Be sure to return the support rod to its clip before closing the hood. Closing
the hood with the support rod up could cause the hood to bend.
4

Maintenance and care
435

4-3. Do-it-yourself maintenance

Positioning a floor jack
When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury.

Front (2.7L 4-cylinder [1AR-FE] engine)

Front (3.5L V6 [2GR-FE] engine)

Rear (2WD models)

436

4-3. Do-it-yourself maintenance

Rear (4WD models)

Removing the front jack point cover (3.5 L V6 (2GR-FE) engine)
Before jacking up the vehicle, remove the jack point cover.
Turn the bolts counterclockwise
and remove them.

STEP 2

Remove the cover.

Maintenance and care

STEP 1

437

4-3. Do-it-yourself maintenance

CAUTION
■ When raising your vehicle
Make sure to observe the following to reduce the possibility of death or serious injury.
● Lift up the vehicle using a floor jack
such as the one shown in the illustration.

● When using a floor jack, follow the instructions of the manual provided with
the jack.
● Do not use the jack that was supplied with your vehicle.
● Do not put any part of your body or get underneath the vehicle supported
only by the floor jack.
● Always use floor jack and/or automotive jack stands on a solid, flat, level
surface.
● Do not start the engine while the vehicle is supported by the floor jack.
● Stop the vehicle on level firm ground, firmly set the parking brake and shift
the shift lever in P.
● Make sure to set the floor jack properly at the jack point.
Raising the vehicle with an improperly positioned floor jack will damage
the vehicle and may cause the vehicle to fall off the floor jack.
● Do not raise the vehicle while someone is in the vehicle.
● When raising the vehicle, do not place any objects on top of or underneath
the floor jack.

438

4-3. Do-it-yourself maintenance

NOTICE
■ Front jack point cover
● After installing the front jack point cover, make sure it is securely in its original position.
● Before jacking up your vehicles, remove the front jack point cover. Otherwise, the cover may be damaged.

Maintenance and care
439

4-3. Do-it-yourself maintenance

Engine compartment
2.7 L 4-cylinder (1AR-FE) engine

440

Washer fluid tank (→P. 454)

Battery

(→P. 450)

Engine oil filler cap
(→P. 444)

Brake fluid reservoir
(→P. 449)

Engine oil level dipstick
(→P. 442)

Fuse boxes

Engine coolant reservoir
(→P. 446)

Condenser

(→P. 448)

Radiator

(→P. 448)

(→P. 476)

Electric cooling fans

4-3. Do-it-yourself maintenance

3.5 L V6 (2GR-FE) engine

Battery

(→P. 450)

Engine oil filler cap
(→P. 444)

Brake fluid reservoir
(→P. 449)

Engine oil level dipstick
(→P. 442)

Fuse boxes

Engine coolant reservoir
(→P. 446)

Condenser

(→P. 448)

Radiator

(→P. 448)

Maintenance and care

Washer fluid tank (→P. 454)

(→P. 476)

Electric cooling fans

441

4-3. Do-it-yourself maintenance

Engine compartment cover
■ Removing the engine compartment cover

■ Installing the clips

Engine oil
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
■ Checking the engine oil
STEP 1

442

Park the vehicle on level ground. After turning off the engine,
wait more than five minutes for the oil to drain back into the
bottom of the engine.

4-3. Do-it-yourself maintenance

Hold a rag under the end and
pull the dipstick out.

STEP 2

STEP 3

Wipe the dipstick clean.

STEP 4

Reinsert the dipstick fully.

STEP 5

Holding a rag under the end, pull the dipstick out and check
the oil level.

STEP 6

Wipe the dipstick and reinsert it fully.

2.7 L 4-cylinder (1AR-FE) engine
Low
4

Full

Maintenance and care

3.5 L V6 (2GR-FE) engine
Low
Full

443

4-3. Do-it-yourself maintenance

■ Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as that
already in the engine.

Make sure to check the oil type and prepare the items needed before
adding oil.
Engine oil selection

→P. 556

Oil quantity
(Low → Full)

1.6 qt. (1.5 L, 1.3 Imp. qt.)

Items

Clean funnel

STEP 1

Remove the oil filler cap.

STEP 2

Add engine oil slowly, checking the dipstick.

STEP 3

Install the filler cap, turning it clockwise.

■ Engine oil consumption
● The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
● More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
● A new engine consumes more oil.
● When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accurately.
● Oil consumption: Max. 1.1 qt./600 miles, 0.9 Imp. qt./600 miles (1.0 L per
1000 km)

444

4-3. Do-it-yourself maintenance

● If your vehicle consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600
miles (1000 km), contact your Toyota dealer.
■ Changing the engine oil (U.S.A. only)
To reset the oil change system, follow the procedure below:
Vehicles without smart key system
STEP 1 Set the engine switch to the “LOCK” position with the trip meter A

reading shown. (→P. 181)
STEP 2 While pressing the trip meter reset button, set the engine switch to

the “ON” position.
Vehicles with smart key system
STEP 1 Set the “ENGINE START STOP” switch OFF with the trip meter A

reading shown. (→P. 181)
STEP 2 While pressing the trip meter reset button, set the “ENGINE START

STOP” switch to the IGNITION ON mode.
STEP 3 Without multi-information display: Continue to press and hold the

button until the trip meter displays “000000”.

With multi-information display: Continue to press and hold the button until “COMPLETE” appears on the multi-information display.

■ Used engine oil
● Used engine oil contains potentially harmful contaminants which may
cause skin disorders such as inflammation or skin cancer, so care should
be taken to avoid prolonged and repeated contact. To remove used engine
oil from your skin, wash thoroughly with soap and water.
● Dispose of used oil and filters only in a safe and acceptable manner. Do
not dispose of used oil and filters in household trash, in sewers or onto the
ground. Call your Toyota dealer, service station or auto parts store for
information concerning recycling or disposal.
● Do not leave used engine oil within the reach of children.

445

Maintenance and care

CAUTION

4-3. Do-it-yourself maintenance

NOTICE
■ To prevent serious engine damage
Check the oil level on a regular basis.
■ When replacing the engine oil
● Be careful not to spill engine oil on the vehicle components.
● Avoid overfilling, as the engine could be damaged.
● Check the oil level on the dipstick every time you refill the vehicle.
● Be sure the engine oil filler cap is properly tightened.

Engine coolant
The coolant level is satisfactory if it is between the “FULL” and “LOW”
lines on the reservoir when the engine is cold.
Reservoir cap
“FULL”
“LOW”
If the level is on or below the
“LOW” line, add coolant up to the
“FULL” line.

446

4-3. Do-it-yourself maintenance

■ If the coolant level drops within a short time after replenishing
Visually check the radiator, hoses, engine coolant filler cap, radiator cap,
drain cock and water pump.
If you cannot find a leak, have your Toyota dealer pressure test the cap and
check for leaks in the cooling system.
■ Coolant selection
Only use “Toyota Super Long Life Coolant” or similar high quality ethylene
glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology.
U.S.A.:

Toyota Super Long Life Coolant is a mixture of 50% coolant and
50% deionized water. (Enabled: -31°F [-35°C])

Canada: Toyota Super Long Life Coolant is a mixture of 55% coolant and
45% deionized water. (Enabled: -44°F [-42°C])
For more details about engine coolant, contact your Toyota dealer.
4

CAUTION

Do not remove the coolant reservoir cap.
The cooling system may be under pressure and may spray hot coolant if the
cap is removed, causing burns or other injuries.

NOTICE
■ When adding engine coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of
water and antifreeze must be used to provide proper lubrication, corrosion
protection and cooling. Be sure to read the antifreeze or coolant label.
■ If you spill coolant
Be sure to wash it off with water to prevent damage to parts or paint.

447

Maintenance and care

■ When the engine is hot

4-3. Do-it-yourself maintenance

Radiator and condenser
Check the radiator and condenser, and clear away any foreign
objects.
If either of the above parts are extremely dirty or you are not sure of
their condition, have your vehicle checked by your Toyota dealer.
CAUTION
■ When the engine is hot
Do not touch the radiator or condenser as they may be hot and may cause
burns.
■ When the electric cooling fans are operating
Do not touch the engine compartment.
Vehicles without smart key system: The electric cooling fans may keep rotating for about 3 minutes after the engine switch is turned to the “LOCK” position.
With the engine switch in the “ON” position, the electric cooling fans may
automatically start to run if the air conditioning is on and/or the coolant temperature is high. Be sure the engine switch is in the “LOCK” position when
working near the electric cooling fan or radiator grille.
Vehicles with smart key system: The electric cooling fan may keep rotating
for about 3 minutes even after the “ENGINE START STOP” switch is OFF.
With the “ENGINE START STOP” switch in IGNITION ON mode, the electric
cooling fans may automatically start to run if the air conditioning is on and/or
the coolant temperature is high. Be sure the “ENGINE START STOP” switch
is OFF when working near the electric cooling fans or radiator grille.

448

4-3. Do-it-yourself maintenance

Brake fluid
■ Checking fluid level
The brake fluid level should be
between the “MAX” and “MIN”
lines on the tank.

Make sure to check the fluid type and prepare the necessary items.
■ Adding fluid
Fluid type
Items

SAE J1703 or FMVSS No.116 DOT 3
Clean funnel

Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid.

CAUTION
■ When filling the reservoir
Take care because brake fluid can harm your hands or eyes and damage
painted surfaces.
If fluid gets in your eyes, flush your eyes with clean water immediately.
If you still experience discomfort, see a doctor.

449

Maintenance and care

■ Brake fluid can absorb moisture from the air

4-3. Do-it-yourself maintenance

NOTICE
■ If the fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads
wear or when the fluid level in the accumulator is high.
If the reservoir needs frequent refilling, it may indicate a serious problem.

Battery
■ Battery exterior
Make sure that the battery terminals are not corroded and that
there are no loose connections, cracks, or loose clamps.
Terminals
Hold-down clamp

■ Checking battery fluid
Check that the level is between
“UPPER”/“MAX” and “LOWER”/
“MIN”.
“UPPER”/“MAX”
“LOWER”/“MIN”
If the fluid level is at or below
“LOWER”/“MIN”, add distilled
water.

450

4-3. Do-it-yourself maintenance

■ Adding distilled water
Low
O.K.

STEP 1
STEP 2

Remove the vent plug.
Add distilled water.
If the “UPPER”/“MAX” line cannot be seen, check the fluid level by
looking directly at the cell.

STEP 3

Put the vent plug back on and close securely.

■ Before recharging

● If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable.
● Make sure the power switch on the charger is off when connecting and
disconnecting the charger cables to the battery.
■ After recharging the battery (vehicles with smart key system)
The engine may not start. Follow the procedure below to initialize the system.
STEP 1 Shift the shift lever to P.
STEP 2 Open and close any of the doors.
STEP 3 Restart the engine.

451

Maintenance and care

When recharging, the battery produces hydrogen gas which is flammable
and explosive. Therefore, before recharging:

4-3. Do-it-yourself maintenance

CAUTION
■ Chemicals in the battery
A battery contains poisonous and corrosive sulfuric acid and may produce
hydrogen gas which is flammable and explosive. To reduce the risk of death
or serious injury, take the following precautions while working on or near the
battery:
● Do not cause sparks by touching the battery terminals with tools.
● Do not smoke or light a match near the battery.
● Avoid contact with eyes, skin and clothes.
● Never inhale or swallow electrolyte.
● Wear protective safety glasses when working near the battery.
● Keep children away from the battery.
■ Where to safely charge the battery
Always charge the battery in an open area. Do not charge the battery in a
garage or closed room where there is not sufficient ventilation.
■ How to recharge the battery
Only perform a slow charge (5 A or less). The battery may explode if
charged at a quicker rate.
■ Emergency measures regarding electrolyte
● If electrolyte gets in your eyes
Flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If possible, continue to apply water with a sponge or
cloth while traveling to the nearest medical facility.
● If electrolyte gets on your skin
Wash the affected area thoroughly. If you feel pain or burning, get medical
attention immediately.

452

4-3. Do-it-yourself maintenance

CAUTION
● If electrolyte gets on your clothes
It can soak through clothing on to your skin. Immediately take off the clothing and follow the procedure above if necessary.
● If you accidentally swallow electrolyte
Drink a large quantity of water or milk. Get emergency medical attention
immediately.

NOTICE
■ When recharging the battery
Never recharge the battery while the engine is running. Also, be sure all
accessories are turned off.
■ When adding distilled water
Avoid overfilling. Water spilled during battery recharging may cause corrosion.

Maintenance and care
453

4-3. Do-it-yourself maintenance

Washer fluid
Add washer fluid in the following
situations.
● Any washer does not work.
● The low washer fluid warning
light comes on (vehicles without multi-information display).
● The
warning
message
appears on the multi-information display (vehicles with
multi-information display).
CAUTION
■ When adding washer fluid
Do not add the washer fluid when the engine is hot or running, as the washer
fluid contains alcohol and may catch fire if spilled on the engine etc.

NOTICE
■ Do not use any fluid other than washer fluid
Do not use soapy water or engine antifreeze instead of washer fluid.
Doing so may cause streaking on the vehicle’s painted surfaces.
■ Diluting washer fluid
Dilute washer fluid with water as necessary.
Refer to the freezing temperatures listed on the washer fluid tank.

454

4-3. Do-it-yourself maintenance

Tires
Replace or rotate tires in accordance with maintenance schedules and treadwear.

■ Checking tires
New tread
Treadwear indicator
Worn tread
The location of treadwear
indicators is shown by the
“TWI” or “ ” marks, etc.,
molded on the sidewall of
each tire.
Check spare tire condition
and inflation pressure if not
rotated.

■ Tire rotation

Vehicles without compact spare tire

Front

To equalize tire wear and
extend tire life, Toyota recommends that tire rotation is
carried out at the same interval as tire inspection.

455

Maintenance and care

Rotate the tires in the order
shown.

4-3. Do-it-yourself maintenance

Vehicles with compact spare tire
Rotate the tires in the order
shown.

Front

To equalize tire wear and
extend tire life, Toyota recommends that tire rotation is
carried out at the same interval as tire inspection.

■ The tire pressure warning system
Your Toyota is equipped with a tire pressure warning system that
uses tire pressure warning valves and transmitters to detect low
tire inflation pressure before serious problems arise.
(→P. 511, 519)
Vehicles with compact spare tire: The compact spare tire is not
equipped with the tire pressure warning valve and transmitters.

456

4-3. Do-it-yourself maintenance

Installing tire pressure warning valves and transmitters
When replacing tires or wheels, tire pressure warning valves and
transmitters must also be installed.
When new tire pressure warning valves and transmitters are
installed, new tire pressure warning valve and transmitter ID codes
must be registered in the tire pressure warning computer and the tire
pressure warning system must be initialized. Have tire pressure
warning valve and transmitter ID codes registered by your Toyota
dealer. (→P. 459)
Initializing the tire pressure warning system
■ The tire pressure warning system must be initialized when the
tire inflation pressure is changed (such as when changing
traveling speed or towing a trailer.)
When the tire pressure warning system is initialized, the current tire
inflation pressure is set as the benchmark pressure.

■ How to initialize the tire pressure warning system

Maintenance and care

STEP 1

Park the vehicle in a safe place and turn the “ENGINE START
STOP” switch or the engine switch OFF.
While the vehicle is moving, initialization is not performed.

STEP 2

Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (→P. 563)
Make sure to adjust the tire pressure to the specified cold tire
inflation pressure level. The tire pressure warning system will
operate based on this pressure level.

STEP 3

Turn the “ENGINE START STOP” switch to IGNITION ON
mode (vehicles with smart key system) or the engine switch to
the “ON” position (vehicles without smart key system).

457

4-3. Do-it-yourself maintenance

Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.

STEP 4

Vehicles without smart key system
STEP 5

Wait for a few minutes with the engine switch in the “ON” position, and then turn the engine switch to the “LOCK” position.

Vehicles with smart key system
STEP 5

458

Wait for a few minutes with IGNITION ON mode, and then
turn the “ENGINE START STOP” switch OFF.

4-3. Do-it-yourself maintenance

Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code of the tire pressure
warning valve and transmitter. Have the ID code registered by your
Toyota dealer.
■ When to replace your vehicle's tires

Tires should be replaced if:
● You have tire damage such as cuts, splits, cracks deep enough to

expose the fabric, or bulges indicating internal damage
● A tire goes flat repeatedly or cannot be properly repaired due to the

size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
■ Replacing tires and wheels

■ Tire life

Any tire over 6 years old must be checked by a qualified technician even
if they have seldom or never been used or damage is not obvious.
■ If the tread wears down below 0.16 in. (4 mm) on snow tires

The effectiveness of snow tires is lost.
■ When the tire pressure warning valves and transmitter are removed

from the wheel on occasions such as when replacing tires
The tire inflation pressure data updated before servicing is retained.

459

Maintenance and care

If the ID code of the tire pressure warning valve and transmitter is not
registered, the tire pressure warning system will not work properly. After
driving for about 20 minutes, the tire pressure warning light comes on
after blinking for 1 minute to indicate a system malfunction.

4-3. Do-it-yourself maintenance

■ Maximum load of tire

Check that the number given by dividing the maximum load by 1.10 of
the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings
(GAWR) of either the front axle or the rear axle, whichever is greater.
For the GAWR, see the Certification
Label. For the maximum load of the
tire, see the load limit at maximum cold
tire inflation pressure mentioned on the
sidewall of the tire. (→P. 570)

■ Tire types

1 Summer tires
Summer tires are high-speed performance tires best suited to highway
driving under dry conditions. Since summer tires do not have the same
traction performance as snow tires, summer tires are inadequate for
driving on snow-covered or icy roads. For driving on snow-covered
roads or icy roads, the use of snow tires is recommended. When
installing snow tires, be sure to replace all four tires.
2 All season tires
All season tires are designed to provide better traction in snow and to
be adequate for driving in most winter conditions, as well as for use
year round. All season tires, however, do not have adequate traction
performance compared with snow tires in heavy or loose snow. Also,
all season tires fall short in acceleration and handling performance
compared with summer tires in highway driving.
3 Snow tires
For driving on snow-covered roads or icy roads, we recommend using
snow tires. If you need snow tires, select tires of the same size, construction and load capacity as the originally installed tires. Since your
vehicle has radial tires as original equipment, make sure your snow
tires also have radial construction. Do not install studded tires without
first checking local regulations for possible restriction. Snow tires
should be installed on all wheels. (→P. 231)

460

4-3. Do-it-yourself maintenance

■ Initializing the tire pressure warning system

Initialize the tire pressure warning system with the tire inflation pressure
adjusted to the specified level.
■ If you push the tire pressure warning reset switch accidentally

If initialization is performed, adjust the tire inflation pressure to the specified level and initialize the tire pressure warning system again.
■ When the initialization of the tire pressure warning system has

failed
Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not
operate properly. If repeated attempts to record tire inflation pressure
settings are unsuccessful, have the vehicle inspected by your Toyota
dealer.
● When operating the tire pressure warning reset switch, the tire pres-

sure warning light does not flash 3 times.
● After carrying out the initialization procedure, the tire pressure warn-

ing light blinks for 1 minute then stays on after driving for about 20
minutes.
The tire pressure warning system does not replace routine tire inflation
pressure checks. Make sure to check tire inflation pressure as part of
your routine of daily vehicle checks.

461

Maintenance and care

■ Routine tire inflation pressure checks

4-3. Do-it-yourself maintenance

■ Tire pressure warning system certification

For vehicles sold in the U.S.A.
FCC ID: PAXPMV107J
FCC ID: HYQ13BCX
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
For vehicles sold in Canada
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

462

4-3. Do-it-yourself maintenance

CAUTION
■ When inspecting or replacing tires

Observe the following precautions to prevent accidents. Failure to do so
may cause damage to parts of the drive train, as well as dangerous handling characteristics, which may lead to an accident resulting in death or
serious injury.
● Do not mix tires of different makes, models or tread patterns.

Also, do not mix tires of remarkably different treadwear.
● Do not use tire sizes other than those recommended by Toyota.
● Do not mix differently constructed tires (radial, bias-belted or bias-ply

tires).
● Do not mix summer, all season and winter tires.
● Do not tow the vehicle with the spare tire installed.
■ When initializing the tire pressure warning system

463

Maintenance and care

Do not push the tire pressure warning reset switch without first adjusting
the tire inflation pressure to the specified level. Otherwise, the tire pressure warning light may not come on even if the tire inflation pressure is
low, or it may come on when the tire inflation pressure is actually normal.

4-3. Do-it-yourself maintenance

NOTICE
■ Repairing or replacing tires, wheels, tire pressure warning valves,

transmitters and tire valve caps
● When removing or fitting the wheels, tires or the tire pressure warning
valve and transmitter, contact your Toyota dealer as the tire pressure
warning valve and transmitter may be damaged if not handled correctly.
● When replacing tire valve caps, do not use tire valve caps other than those
specified. The cap may become stuck.
■ To avoid damaging the tire pressure warning valves and transmit-

ters
Do not use liquid sealants on flat tires.
■ Do not use puncture sealant sprays to repair flats

Puncture sealant sprays may damage tire pressure warning valves and
transmitters.
■ Driving on rough roads

Take particular care when driving on roads with loose surfaces or potholes.
These conditions may cause losses in tire inflation pressure, reducing
the cushioning ability of the tires. In addition, driving on rough roads may
cause damage to the tires themselves, as well as the vehicle's wheels
and body.
■ If tire inflation pressures become low while driving

Do not continue driving, or your tires and/or wheels may be ruined.

464

4-3. Do-it-yourself maintenance

Tire inflation pressure
■ Tire inflation pressure
The recommended cold tire inflation pressure and tire size is displayed on the tire and loading information label. (→P. 570)

Maintenance and care

■ Inspection and adjustment procedure
Tire valve
Tire pressure gauge

STEP 1

Remove the tire valve cap.

465

4-3. Do-it-yourself maintenance

STEP 2

Press the tip of the tire pressure gauge onto the tire valve.

STEP 3

Read the pressure using the graduations of the gauge.

STEP 4

If the tire inflation pressure is not within the recommended
levels, adjust the pressure.
If you add too much air, press the center of the valve to
lower.

STEP 5

After completing the tire inflation pressure measurement
and adjustment, apply soapy water to the valve and check
for leakage.

STEP 6

Reinstall the tire valve cap.

■ Tire inflation pressure check interval

You should check tire inflation pressure every two weeks, or at least
once a month.
Do not forget to check the spare.
■ Effects of incorrect tire inflation pressure

Driving with incorrect tire inflation pressure may result in the following:
● Reduced fuel efficiency
● Reduced driving comfort and tire life
● Reduced safety
● Damage to the drive train

If a tire needs frequent reinflating, have it checked by your Toyota dealer.
■ Instructions for checking tire inflation pressure

When checking tire inflation pressure, observe the following:
● Check only when the tires are cold.

If your vehicle has been parked for at least 3 hours and has not been
driven for more than 1 mile or 1.5 km, you will get an accurate cold
tire inflation pressure reading.

466

4-3. Do-it-yourself maintenance

● Always use a tire pressure gauge.

The appearance of the tire can be misleading. In addition, tire inflation pressures that are even just a few pounds off can degrade ride
and handling.
● Do not bleed or reduce tire inflation pressure after driving. It is normal

for the tire inflation pressure to be higher after driving.
● Never exceed the vehicle capacity weight.

Passengers and luggage weight should be placed so that the vehicle
is balanced.

CAUTION
■ Proper inflation is critical to save tire performance

Keep your tires properly inflated.
Otherwise, the following conditions may occur and result in an accident
causing death or serious injury.
● Excessive wear

● Uneven wear

Maintenance and care

● Poor handling
● Possibility of blowouts resulting from overheated tires
● Poor sealing of the tire bead
● Wheel deformation and/or tire separation
● A greater possibility of tire damage from road hazards

NOTICE
■ When inspecting and adjusting tire inflation pressure

Be sure to reinstall the tire valve caps.
Without the valve caps, dirt or moisture could get into the valve and
cause air leakage, which could result in an accident. If the caps have
been lost, replace them as soon as possible.

467

4-3. Do-it-yourself maintenance

Wheels
If a wheel is bent, cracked or heavily corroded, it should be
replaced.
Otherwise, the tire may separate from the wheel or cause loss of
handling control.

■ Wheel selection
When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and inset*.
Replacement wheels are available at your Toyota dealer.

*: Conventionally referred to as “offset”.
Toyota does not recommend using:
● Wheels of different sizes or types
● Used wheels
● Bent wheels that have been straightened
■ Aluminum wheel precautions
● Use only Toyota wheel nuts and wrenches designed for use
with your aluminum wheels.
● When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).
● Be careful not to damage the aluminum wheels when using
tire chains.
● Use only Toyota genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.

468

4-3. Do-it-yourself maintenance

■ When replacing wheels

The wheels of your Toyota are equipped with tire pressure warning
valves and transmitters that allow the tire pressure warning system to
provide advanced warning in the event of a loss in tire inflation pressure.
Whenever wheels are replaced, the tire pressure warning valves and
transmitters must be installed. (→P. 457)

CAUTION
■ When replacing wheels
● Do not use wheels that are a different size from those recommended in

the Owner’s Manual, as this may result in loss of handling control.
● Never use an inner tube in a leaking wheel which is designed for a

tubeless tire. Doing so may result in an accident, causing serious
injury or death.
4

NOTICE

● Because tire repair or replacement may affect the tire pressure

warning valves and transmitters, make sure to have tires serviced by
your Toyota dealer or other qualified service shop. In addition, make
sure to purchase your tire pressure warning valves and transmitters at
your Toyota dealer.
● Ensure that only genuine Toyota wheels are used on your vehicle.

Tire pressure warning valves and transmitters may not work properly
with non-genuine wheels.

469

Maintenance and care

■ Replacing tire pressure warning valves and transmitters

4-3. Do-it-yourself maintenance

Air conditioning filter
The air conditioning filter must be changed regularly to maintain air
conditioning efficiency.

■ Removal method
STEP 1

Vehicles without smart key system: Turn the engine switch
OFF.
Vehicles with smart key system: Turn the “ENGINE START
STOP” switch OFF.

STEP 2

Open the glove box. Slide off
the damper.

STEP 3

Push each side of the glove
box to release the pins. Then
pull the glove box down
toward you.

STEP 4

Lift up the cover.

470

4-3. Do-it-yourself maintenance

STEP 5

Remove the filter cover.

■ Replacement method
Remove the air conditioning
filter and replace it with a new
one.
The “↑UP” marks shown on the
filter should be pointing up.
4

Inspect and replace the air conditioning filter according to the maintenance
schedule. In dusty areas or areas with heavy traffic flow, replacement may
be required. (For scheduled maintenance information, please refer to the
“Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.)
■ If air flow from the vents decreases dramatically
The filter may be clogged. Check the filter and replace if necessary.

471

Maintenance and care

■ Checking interval

4-3. Do-it-yourself maintenance

NOTICE
■ When using the air conditioning system
Make sure that a filter is always installed.
Using the air conditioning system without a filter may cause damage to the
system.

472

4-3. Do-it-yourself maintenance

Wireless remote control/electronic key battery
Replace the battery with a new one if it is discharged.

■ You will need the following items:
● Flathead screwdriver (To prevent damage to the key, cover
the tip of the screwdriver with a rag.)
● Small Phillips-head screwdriver
● Lithium battery CR2032 (vehicles without smart key system),
CR1632 (vehicles with smart key system)
■ Replacing the battery (vehicles without smart key system)
STEP 1

Remove the cover using a
coin protected with tape etc.

Remove the discharged transmitter battery.
Insert a new battery with the
“+” terminal facing up.

473

Maintenance and care

STEP 2

4-3. Do-it-yourself maintenance

■ Replacing the battery (vehicles with smart key system)
STEP 1

Take out the mechanical key.

STEP 2

Remove the cover.

STEP 3

Remove the depleted battery.
Insert a new battery with the
“+” terminal facing up.

474

4-3. Do-it-yourself maintenance

■ If the electronic key battery is discharged
The following symptoms may occur.
● The smart key system and wireless remote control will not function properly.
● The operational range is reduced.
■ Use a CR2032 (vehicles without smart key system) or CR1632 (vehicles
with smart key system) lithium battery
● Batteries can be purchased at your Toyota dealer, jewelers, or camera
stores.
● Replace only with the same or equivalent type recommended by your
Toyota dealer.
● Dispose of used batteries according to the local laws.

CAUTION
4

■ Removed battery and other parts

NOTICE
■ For normal operation after replacing the battery
Observe the following precautions to prevent accidents.
● Always work with dry hands.
Moisture may cause the battery to rust.
● Do not touch or move any other components inside the remote control.
● Do not bend either of the battery terminals.

475

Maintenance and care

Keep away from children. These parts are small and if swallowed by a child,
they can cause choking. Failure to do so could result in death or serious
injury.

4-3. Do-it-yourself maintenance

Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
STEP 1

Vehicles without smart key system: Turn the engine switch
OFF.
Vehicles with smart key system: Turn the “ENGINE START
STOP” switch OFF.

STEP 2

Open the fuse box cover.

Engine compartment (type A)
Push the tab in and lift the
fuse box cover off.

Engine compartment (type B)
Push the tab in and lift the
fuse box cover off. (if
equipped)

476

4-3. Do-it-yourself maintenance

Under the instrument panel
Remove the lid.

STEP 3

After a system failure, see “Fuse layout and amperage ratings” (→P. 479) for details about which fuse to check.

STEP 4

Remove the fuse with the pullout tool.
4

Maintenance and care

STEP 5

Check if the fuse has blown.

Type A
Normal fuse
Blown fuse
Replace it with one of an
appropriate amperage rating.
The amperage rating can be
found on the fuse box lid.

477

4-3. Do-it-yourself maintenance

Type B
Normal fuse
Blown fuse
Replace it with one of an
appropriate amperage rating.
The amperage rating can be
found on the fuse box lid.

Type C
Normal fuse
Blown fuse
Contact your Toyota dealer.

Type D
Normal fuse
Blown fuse
Contact your Toyota dealer.

478

4-3. Do-it-yourself maintenance

Fuse layout and amperage ratings
■ Engine compartment
Type A (fuse block on the back of the cover)

Type A (fuse block)

Maintenance and care

Fuse

Ampere

Circuit

SPARE

7.5 A

Spare fuse

SPARE

15 A

Spare fuse

SPARE

25 A

Spare fuse
479

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

DEF RLY

10 A

Rear window defogger

MIR HTR

10 A

Outside rear view mirror defoggers

PWR OUTLET

20 A

Power outlet

DOOR NO.1

25 A

Multiplex communication system

EFI NO.2

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system

EFI NO.3

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system

INJ NO.1

15 A

Starting system

INJ NO.2

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system

HTR

50 A

Air conditioning system

VSC NO.1

50 A

Enhanced vehicle stability control
system

FAN MAIN

50 A

Electric cooling fans

VSC NO.2

30 A

Enhanced vehicle stability control
system

PTC NO.1

50 A

Air conditioning system

PTC NO.2

30 A

Air conditioning system

PTC NO.3

30 A

Air conditioning system

RR CLR

40 A

Air conditioning system

RR DEF

30 A

Rear window defogger

PBD

30 A

Power back door

140 A

MIR HTR, PWR OUTLET, DOOR
NO.1, HTR, RR DEF, FAN MAIN,
VSC NO.1, PTC NO.1, RR CLR,
PTC NO.2, PTC NO.3, VSC NO.2,
PBD

480

ALT

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

EPS

80 A

Electric power steering

30 A

Starting system

CRT

10 A

Rear seat entertainment system,
audio system

RADIO NO.1

20 A

Audio system

10 A

Steering sensor, gauges and
meters, clock, main body ECU,
wireless remote control, smart key
system, power back door, multiinformation display, front passenger occupant classification system

ECU-B NO.1

DOME

10 A

TOWING

30 A

Trailer lights

STR LOCK

20 A

Steering lock system

EFI MAIN

25 A

Multiport fuel injection system/
sequential multiport fuel injection
system, EFI NO.2, EFI NO.3

HAZ

15 A

Turn signal lights

IG2

25 A

INJ NO.1, INJ NO.2, IGN, GAUGE
NO.2

AMP

15 A

Audio system

RR FOG

7.5 A

No circuit

DEICER

15 A

Windshield wiper de-icer

G/H

10 A

Glass hatch, multiplex communication system, outer foot lights

ALT-S

7.5 A

Charging system

AM2

7.5 A

Multiplex communication system

H-LP LH HI

15 A

Left-hand headlight (high beam)

Maintenance and care

Vanity lights, personal lights, interior light, gauges and meters,
engine switch light, door courtesy
lights

481

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

H-LP RH HI

15 A

Right-hand headlight (high beam)

H-LP LH LO

15 A

Left-hand headlight (low beam)

H-LP RH LO

15 A

Right-hand headlight (low beam)

HORN

10 A

Horn

EFI NO.1

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system, smart key system

ETCS

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system

A/F

20 A

Air fuel ratio sensor

S-HORN

7.5 A

Horn

Type B (if equipped)

Fuse

482

Ampere

Circuit

INV-W/P

15 A

No circuit

IGCT NO.2

7.5 A

No circuit

A/C

10 A

No circuit

4-3. Do-it-yourself maintenance

■ Under the instrument panel
Front side of the fuse block

Fuse block

Ampere

Circuit

P/SEAT

30 A

Power seat

POWER

30 A

Power windows

RR DOOR RH

25 A

Power windows

RR DOOR LH

25 A

Power windows

FR FOG

10 A

Fog lights

OBD

7.5 A

On-board diagnosis system

A/C W/PMP

7.5 A

No circuit

10 A

Enhanced vehicle stability control
system, multiplex communication
system, multiport fuel injection system/sequential multiport fuel injection system, shift lock system, stop
lights

STOP

Maintenance and care

Fuse

483

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

DOOR NO.2

25 A

Power windows

AM1

7.5 A

Starting system

P/SEAT (PS)

30 A

Power seat

A/C NO.1

10 A

Air conditioning system

FUEL OPN

7.5 A

No circuit

S/ROOF

20 A

Electric moon roof

TAIL

15 A

Parking lights, tail lights, license
plate lights, fog lights, trailer lights

PANEL

7.5 A

Glove box light, instrument panel
lights, switch illumination

ECU IG NO.1

10 A

Multiplex communication system,
electric moon roof, electronically
controlled automatic transmission
system, power back door, seat
heaters, tire pressure warning system, electronic power steering,
anti-glare inside rear view mirror,
shift lock system, tire pressure
warning system

ECU IG NO.2

7.5 A

Enhanced vehicle stability control
system

A/C NO.2

10 A

Air conditioning system

WASH

20 A

Windshield and rear window
washer

S-HTR

20 A

Seat heaters

484

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

GAUGE NO.1

10 A

Audio system, back-up lights,
charging system, emergency flashers, traction control system, windshield wiper de-icer, air
conditioning system, charging system, rear view monitor system,
trailer lights, multiport fuel injection
system/sequential multiport fuel
injection system

FR WIP

30 A

Windshield wipers and washer

RR WIP

15 A

Rear window wiper and washer

10 A

Multiport fuel injection system/
sequential multiport fuel injection
system, steering lock system,
smart key system, SRS airbag system

IGN

GAUGE NO.2

7.5 A

ECU-ACC

7.5 A

Outside rear view mirrors, shift lock
system, smart key system, multiplex communication system

ACC SOCK
NO.1

15 A

Power outlet

ACC SOCK
NO.2

15 A

Power outlet

RADIO NO.2

7.5 A

Audio system, clock, rear seat
entertainment system, interior
lights, personal lights

Maintenance and care

Gauges and meters, rear view
monitor system

485

4-3. Do-it-yourself maintenance

■ After a fuse is replaced
● If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (→P. 487)
● If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
■ If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.

CAUTION
■ To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
● Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
● Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
● Do not modify fuses or the fuse box.

NOTICE
■ Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.

486

4-3. Do-it-yourself maintenance

Light bulbs
You may replace the following bulbs yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact your Toyota dealer.
For more information about replacing other light bulbs, contact your
Toyota dealer.

■ Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (→P. 566)
■ Turn the power back door main switch OFF. (vehicles with
power back door)
→P. 59
■ Front bulb locations
Headlight low beams
Headlight high
beams and
daytime running
lights (if equipped)

Maintenance and care

Parking, front side
marker and front turn
signal lights
Fog lights (if equipped)

487

4-3. Do-it-yourself maintenance

■ Rear bulb locations
Rear turn signal lights

Stop/tail and rear
side marker lights
License plate lights
Back-up lights

Replacing light bulbs
■ Headlights
STEP 1

Turn the bulb base counterclockwise.
Low beam (outside)
High beam (inside)

488

4-3. Do-it-yourself maintenance

STEP 2

Unplug the connector while
depressing the lock release.
Low beam
High beam

■ Fog lights (if equipped)
STEP 1

Unplug the connector while
depressing the lock release.

Maintenance and care
489

4-3. Do-it-yourself maintenance

STEP 2

Turn the bulb counterclockwise.

■ Parking, front side marker and front turn signal lights
STEP 1

Turn the bulb base counterclockwise.

STEP 2

Remove the light bulb.

490

4-3. Do-it-yourself maintenance

■ Back-up lights, stop/tail and rear side marker, and rear turn
signal lights
Left side
STEP 1

Open the back door and remove
the cover.
To protect the cover, place a rag
between the flathead screwdriver
and cover as shown in the illustrations.

Right side
STEP 1

Open the back door and remove
the cover.

STEP 2

Turn the bulb base counterclockwise.
Rear turn signal light
Stop/tail and rear side marker
light
Back-up light

491

Maintenance and care

To protect the cover, place a rag
between the flathead screwdriver
and cover as shown in the illustrations.

4-3. Do-it-yourself maintenance

STEP 3

Remove the light bulb.
Rear turn signal light
Stop/tail and rear side marker
light
Back-up light

■ License plate lights
STEP 1

Remove the screw and remove
the unit.

STEP 2

Turn the bulb base counterclockwise.

STEP 3

Remove the light bulb.

492

4-3. Do-it-yourself maintenance

■ High mounted stoplight and outer foot lights
If the high mounted stoplight or outer foot light has burnt out, have
it replaced by your Toyota dealer.
■ Condensation build-up on the inside of the lens
Contact your Toyota dealer for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
● Large drops of water are built up on the inside of the lens.
● Water has built up inside the headlight.
■ LED high mounted stoplight
The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to your Toyota dealer to have the light replaced.

CAUTION
4

■ Replacing light bulbs

● Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.
● Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
■ To prevent damage or fire
Make sure bulbs are fully seated and locked.

493

Maintenance and care

● Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights.
The bulbs become very hot and may cause burns.

4-3. Do-it-yourself maintenance

494

5-1. Essential information

Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is
involved in an accident.

Vehicles without navigation system
Press the switch to flash all
the turn signal lights. To turn
them off, press the switch
once again.

Vehicles with navigation system
Press the switch to flash all
the turn signal lights. To turn
them off, press the switch
once again.

NOTICE
■ To prevent battery discharge
Do not leave the emergency flashers on longer than necessary when the
engine is not running.

496

5-1. Essential information

If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by
your Toyota dealer or a commercial towing service, using a lift-type
truck or a flat bed truck.
Use a safety chain system for all towing, and abide by all state/provincial and local laws.
2WD models: If towing from the front, the vehicle's rear wheels and
axles must be in good condition. (→P. 501)
If they are damaged, use a towing dolly or flat bed truck.

Before towing
The following may indicate a problem with your transmission. Contact
your Toyota dealer before towing.
● The engine is running, but the vehicle will not move.
● The vehicle makes an abnormal sound.

When trouble arises
497

5-1. Essential information

Emergency towing
If a tow truck is not available, in an emergency your vehicle may be
temporarily towed using a cable or chain secured to the emergency
towing eyelet(s). This should only be attempted on hard surfaced
roads for short distances at low speeds.
A driver must be in the vehicle to steer and operate the brakes. The
vehicle’s wheels, drive train, axles, steering and brakes must be in
good condition.
Towing eyelets

■ Emergency towing procedure
STEP 1 Release the parking brake.
STEP 2 Shift the shift lever to N.
STEP 3 Vehicles without smart key system:

Turn the engine switch to “ACC” (engine off) or “ON” (engine running) position.
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch to ACCESSORY (engine
off) or IGNITION ON (engine running) mode.

498

5-1. Essential information

CAUTION
■ Caution while towing
● Use extreme caution when towing the vehicle.
Avoid sudden starts or erratic driving maneuvers which place excessive
stress on the emergency towing eyelets and the cables or chains. Always
use caution for the surroundings and other vehicles while towing.
● If the engine is not running, the power assist for the brakes and steering
will not function, making steering and braking more difficult.

NOTICE
■ To prevent causing serious damage to the transmission
Never tow this vehicle from the rear with the front wheels on the ground.
This may cause serious damage to the transmission.

Installing a towing eyelet
STEP 1

Remove the eyelet cover using a
flathead screwdriver.

STEP 2

Insert the towing eyelet into the
hole and tighten partially by
hand.

499

When trouble arises

To protect the bodywork, place a
rag between the screwdriver and
the vehicle body, as shown in the
illustration.

5-1. Essential information

STEP 3

Tighten down the towing eyelet
securely using a wheel nut
wrench.

■ Location of the emergency towing eyelet
→P. 520

CAUTION
■ Installing towing eyelet to the vehicle
Make sure that towing eyelet is installed securely.
If not securely installed, towing eyelet may come loose during towing. This
may lead to accidents that cause serious injury or even death.

500

5-1. Essential information

Towing with a sling-type truck

NOTICE
■ To prevent body damage
Do not tow with a sling-type truck, either from the front or rear.

Towing with a wheel lift-type truck
From front (2WD models)
Release the parking brake.

When trouble arises
501

5-1. Essential information

From front (4WD models)
Use a towing dolly under the rear
wheels.

NOTICE
■ To prevent damaging the vehicle
When raising the vehicle, ensure adequate ground clearance for towing at
the opposite end of the raised vehicle. Without adequate clearance, the
vehicle could be damaged while being towed.
■ To prevent causing serious damage to the transmission (4WD models)
Never tow this vehicle from the front with the rear wheels on the ground.

From rear
Use a towing dolly under the
front wheels.

NOTICE
■ To prevent causing serious damage to the transmission
Never tow this vehicle from the rear with the front wheels on the ground.

502

5-1. Essential information

Using a flat bed truck
If your Toyota is transported by a
flatbed truck, it should be tied
down at the locations shown in
the illustration.

If you use chains or cables to tie
down your vehicle, the angles
shaded in black must be 45°.
Do not overly tighten the tie
downs or the vehicle may be
damaged.

When trouble arises
503

5-1. Essential information

If you think something is wrong
If you notice any of the following symptoms, your vehicle probably
needs adjustment or repair. Contact your Toyota dealer as soon as
possible.

■ Visible symptoms
● Fluid leaks under the vehicle
(Water dripping from the air conditioning after use is normal.)
● Flat-looking tires or uneven tire wear
● Engine coolant temperature gauge needle continually points
higher than normal
■ Audible symptoms
● Changes in exhaust sound
● Excessive tire squeal when cornering
● Strange noises related to the suspension system
● Pinging or other noises related to the engine
■ Operational symptoms
● Engine missing, stumbling or running rough
● Appreciable loss of power
● Vehicle pulls heavily to one side when braking
● Vehicle pulls heavily to one side when driving on a level road
● Loss of brake effectiveness, spongy feeling, pedal almost
touches the floor

504

5-1. Essential information

Fuel pump shut off system
To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine.

Follow the procedure below to restart the engine after the system is
activated.
Vehicles without smart key system
STEP 1

Turn the engine switch to the “ACC” or “LOCK” position.

STEP 2

Restart the engine.

Vehicles with smart key system
STEP 1

Turn the “ENGINE START STOP” switch OFF.

STEP 2

Restart the engine.

NOTICE
■ Before starting the engine
Inspect the ground under the vehicle.
If you find that fuel has leaked onto the ground, the fuel system has been
damaged and is in need of repair. Do not restart the engine.
5

When trouble arises
505

5-1. Essential information

Event data recorder
Your vehicle has computers that monitor and control certain aspects
of your vehicle. These computers assist in driving and maintaining
optimal vehicle performance.

Besides storing data useful for troubleshooting, there is an event
data recorder (EDR) that records data in a crash or a near car
crash event.

In a crash or a near car crash event
The SRS airbag sensor assembly contains the EDR. In a crash or a
near car crash event, this device may record some or all of the following information:
● Engine speed
● Whether the brake pedal was depressed or not
● Vehicle speed
● To what extent the accelerator pedal was depressed
● Position of the transmission shift lever
● Whether the driver and front passenger wore seat belts or not
● Driver's seat position
● SRS airbag deployment data
● SRS airbag system diagnostic data
● Front passenger’s occupant classification
The information above is intended to be used for the purpose of
improving vehicle safety performance. Unlike general data recorders,
the EDR does not record sound data such as conversation between
passengers.

506

5-1. Essential information

Disclosure of the data
Toyota will not disclose the data recorded in an EDR to a third party
except when:
● An agreement from the vehicle's owner (or the leasing company for
a leased vehicle) is obtained
● Officially requested by the police or other authorities
● Used as a defense for Toyota in a law suit
● Ordered by a court law
However, if necessary Toyota will:
● Use the data for research on Toyota vehicle safety performance
● Disclose the data to a third party for research purposes without disclosing details of the vehicle owner, and only when it is deemed
necessary
● Disclose summarized data cleared of vehicle identification information to a non-Toyota organization for research purposes
5

When trouble arises
507

5-2. Steps to take in an emergency

If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights turn
on or flash. If a light turns on or flashes, but then turns off, this does
not necessarily indicate a malfunction in the system.

Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
The following warning indicates a possible problem in the brake system. Immediately stop the vehicle in a safe place and contact your
Toyota dealer.
Warning light

(U.S.A.)

(Canada)

Warning light/Details
Brake system warning light (warning buzzer)*
• Low brake fluid
• Malfunction in the brake system
This light also comes on when the parking brake is not
released. If the light turns off after the parking brake is
fully released, the system is operating normally.

*: Parking brake engaged warning buzzer:
A buzzer sounds to indicate that the parking brake is still engaged (with the
vehicle having reached a speed of 3 mph [5 km/h]).

508

5-2. Steps to take in an emergency

Stop the vehicle immediately.
The following warnings indicate the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a
safe place and contact your Toyota dealer.
Warning light

Warning light/Details
Charging system warning light
Indicates a malfunction in the vehicle’s charging system.
Low engine oil pressure warning light (vehicles without
multi-information display)
Indicates that the engine oil pressure is too low.

Have the vehicle inspected immediately.
Failing to investigate the cause of the following warnings may lead to
the system operating abnormally and possibly cause an accident.
Have the vehicle inspected by your Toyota dealer immediately.
Warning light

Warning light/Details
5

When trouble arises

(U.S.A.)

Malfunction indicator lamp
Indicates a malfunction in:
• The electronic engine control system;
• The electronic throttle control system; or
• The electronic automatic transmission control system.

(Canada)
SRS warning light
Indicates a malfunction in:
• The SRS airbag system;
• The front passenger occupant classification system; or
• The seat belt pretensioner system.

509

5-2. Steps to take in an emergency

Warning light

(U.S.A.)

Warning light/Details

ABS warning light
Indicates a malfunction in:
• The ABS; or
• The brake assist system.

(Canada)
Electric power steering warning light
Indicates a malfunction in the EPS (Electric Power Steering) system.
Slip indicator light
Indicates a malfunction in:
• The Enhanced VSC system;
• The TRAC system;
• The hill-start assist control system; or
• The downhill assist control system (4WD models).

(Flashes)

Cruise control indicator light (if equipped)
Indicates a malfunction in the cruise control system.

■ If the malfunction indicator lamp comes on while driving
First check the following:
● Is the fuel tank low or empty?
If it is, fill the fuel tank immediately.
● Is the fuel tank cap loose?
If it is, tighten it securely.
The light will go off after taking several driving trips.
If the light does not go off even after several trips, contact your Toyota dealer
as soon as possible.

510

5-2. Steps to take in an emergency

Follow the correction procedures.
After taking the specified steps to correct the suspected problem,
check that the warning light turns off.
Warning light

Warning light/Details

Correction procedure

Open door warning light
(warning buzzer)*1
Indicates that a door is not
fully closed.

Check that all doors are
closed.

Low fuel level warning
light
Indicates that remaining
fuel is about 2.2 gal. (8.3
L, 1.8 Imp. gal.) or less

Refuel the vehicle.

Driver’s seat belt
reminder light
(warning buzzer)*2
Warns the driver to fasten
his/her seat belt.

Fasten the seat belt.

Automatic transmission
fluid temperature warning
light (vehicles without
multi-information display)
Indicates that the automatic transmission fluid
temperature is too high.

Stop the vehicle in a safe
place and shift the shift
lever to P.
If the light does not go off,
contact your Toyota dealer.

511

When trouble arises

(On the center
panel)

Front passenger’s seat
belt reminder light
(warning buzzer)*2
Warns the front passenger to fasten his or her
seat belt.

5-2. Steps to take in an emergency

Warning light

Warning light/Details
Low washer fluid warning
light (vehicles without
multi-information display)
Low level of washer fluid

Correction procedure

Fill the tank.

Engine oil replacement
reminder light (vehicles
without multi-information
display)

(U.S.A.)

Illuminates for about 3 seconds and then flashes for
about 12 seconds: Indicates
that the engine oil is scheduled to be changed.

Check and change the
engine oil if necessary.

Comes on and remains:
Indicates that the engine oil
should be changed.

Check and change the
engine oil.

Tire pressure warning
light

512

When the light comes on:
Low tire inflation pressure

Adjust the tire inflation
pressure.

When the light comes on
after blinking for 1 minute:
Malfunction in the tire
pressure warning system

Have the system checked
by your Toyota dealer.

Master warning light
(vehicles with multi-information display)
A buzzer sounds and the
warning light comes on
and flashes to indicate that
the master warning system
has detected a malfunction.

→P. 519

5-2. Steps to take in an emergency

: Open door warning buzzer:
The open door warning buzzer sounds to alert one or more of the doors is
not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]).

*2: Driver's

and front passenger’s seat belt reminders:

The driver’s and front passenger’s seat belt reminders sound to alert the
driver and front passenger that his or her seat belt is not fastened. These
buzzers sound for 10 seconds after the vehicle has reached a speed of at
least 12 mph (20 km/h). Then, if the seat belt is still unfastened, the buzzer
will sound in a different tone for 20 more seconds.
*3

: Vehicles without navigation system

*4: Vehicles

with navigation system

■ Key reminder buzzer (vehicles without smart key system)
The buzzer indicates that the key has not been removed with the engine off
and the driver’s door opened.
■ Open moon roof reminder buzzer (vehicles with multi-information display)
The buzzer indicates that the moon roof is not fully closed with the engine off
and the driver’s door opened.
■ Front passenger detection sensor and passenger seat belt reminder

● If a cushion is placed on the seat, the sensor may not detect a passenger, and the warning light may not operate properly.
■ Engine oil replacement reminder light (U.S.A. ⎯ vehicles without multiinformation display)
The engine oil replacement reminder light will come on and flash at approximately 4500 miles (7200 km) after an oil change. When the distance driven
after an oil change exceeds approximately 5000 miles (8000 km), the light
will come on and remain on.
■ Changing the engine oil (U.S.A. only)
Make sure to reset the oil change system. (→P. 445)

513

When trouble arises

● If luggage is placed on the front passenger seat, the front passenger
detection sensor may cause the warning light to flash, even if a passenger is not sitting in the seat.

5-2. Steps to take in an emergency

■ When the tire pressure warning light comes on

Check the tire inflation pressure and adjust to the appropriate level.
Pushing the tire pressure warning reset switch does not turn off the tire
pressure warning light.
■ The tire pressure warning light may turn on due to natural causes

The tire pressure warning light may turn on due to natural causes such
as natural air leaks or tire inflation pressure changes caused by temperature. In this case, adjusting the tire inflation pressure will turn off the
warning light (after a few minutes).
■ When a tire is replaced with a spare tire

Without compact spare tire
The spare tire is also equipped with the tire pressure warning valve and
transmitter. The tire pressure warning light will turn on if the tire inflation
pressure of the spare tire is low. If a tire goes flat, even though the flat
tire is replaced with the spare tire, the tire pressure warning light does
not turn off. Replace the spare tire with the repaired tire and adjust the
proper tire inflation pressure. The tire pressure warning light will turn off
after a few minutes.
With compact spare tire
The compact spare tire is not equipped with the tire pressure warning
valve and transmitter. If a tire goes flat, the tire pressure warning light will
not turn off even though the flat tire is replaced with the spare tire.
Replace the spare tire with the repaired tire and adjust the proper tire
inflation pressure. The tire pressure warning light will turn off after a few
minutes.

514

5-2. Steps to take in an emergency

■ If the tire pressure warning system is inoperative

The tire pressure warning system will be disabled in the following conditions:
(When the condition becomes normal, the system will work properly.)
● If tires not equipped with tire pressure warning valves and transmit-

ters are used.
● If the ID code on the tire pressure warning valves and transmitters is

not registered in the tire pressure warning computer.
● If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm2 or bar) or

higher.
The tire pressure warning system may be disabled in the following conditions:
(When the condition becomes normal, the system will work properly.)
● If electronic devices or facilities using similar radio wave frequencies

are nearby.
● If a radio set at similar frequencies is in use in the vehicle.
● If a window tint that affects the radio wave signals is installed.
● If there is a lot of snow or ice on the vehicle, in particular around the

wheels or wheel housings.
● If non-genuine Toyota wheels are used. (Even if you use Toyota

wheels, the tire pressure warning system may not work properly with
some types of tires.)
Vehicles without compact spare tire
● If the spare tire is in a location subject to poor radio wave signal

reception.
● If a large metallic object which can interfere with signal reception is

put in the luggage room.

515

When trouble arises

● If tire chains are used.

5-2. Steps to take in an emergency

■ If the tire pressure warning light comes on after blinking for 1

minute frequently
Vehicles without smart key system
If the tire pressure warning light comes on after blinking for 1 minute frequently when the engine switch is turned to the “ON” position, have it
checked by your Toyota dealer.
Vehicles with smart key system
If the tire pressure warning light comes on after blinking for 1 minute frequently when the “ENGINE START STOP” switch is turned to IGNITION
ON mode, have it checked by your Toyota dealer.

516

5-2. Steps to take in an emergency

CAUTION
■ If the tire pressure warning light comes on

Be sure to observe the following precautions. Failure to do so could
cause loss of vehicle control and result in death or serious injury.
● Stop your vehicle in a safe place as soon as possible. Adjust the tire

inflation pressure immediately.
● If the tire pressure warning light comes on even after tire inflation pres-

sure adjustment, it is probable that you have a flat tire. Check the tires.
If the tire is flat, change to the spare tire and have the flat tire repaired
by the nearest Toyota dealer.
● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate,

you could lose control of the steering wheel or the brakes.
■ If a blowout or sudden air leakage should occur

The tire pressure warning system may not activate immediately.
■ Maintenance of the tires

Each tire, including the spare (if provided), should be checked monthly
when cold and inflated to the inflation pressure recommended by the
vehicle manufacturer on the vehicle placard or tire inflation pressure
label (tire and load information label). (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation
pressure label [tire and load information label], you should determine the
proper tire inflation pressure for those tires.)

517

When trouble arises

As an added safety feature, your vehicle has been equipped with a tire
pressure monitoring system (TPMS-tire pressure warning system) that
illuminates a low tire pressure telltale (tire pressure warning light) when
one or more of your tires is significantly under-inflated. Accordingly,
when the low tire pressure telltale (tire pressure warning light) illuminates, you should stop and check your tires as soon as possible, and
inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency and tire tread life, and may
affect the vehicle's handling and stopping ability.

5-2. Steps to take in an emergency

CAUTION
Please note that the TPMS (tire pressure warning system) is not a substitute for proper tire maintenance, and it is the driver's responsibility to
maintain correct tire pressure, even if under-inflation has not reached the
level to trigger illumination of the TPMS low tire pressure telltale (tire
pressure warning light).
Your vehicle has also been equipped with a TPMS (tire pressure warning
system) malfunction indicator to indicate when the system is not operating properly. The TPMS (tire pressure warning system) malfunction indicator is combined with the low tire pressure telltale (tire pressure
warning light). When the system detects a malfunction, the telltale will
flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as
long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure
as intended.
TPMS (tire pressure warning system) malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires
or wheels on the vehicle that prevent the TPMS (tire pressure warning
system) from functioning properly. Always check the TPMS (tire pressure warning system) malfunction telltale after replacing one or more
tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS (tire pressure warning system) to
continue to function properly.

NOTICE
■ Precaution when installing a different tire

When a tire of a different specification or maker is installed, the tire pressure warning system may not operate properly.

518

5-2. Steps to take in an emergency

If a warning message is displayed (vehicles with multi-information display)
The multi-information display shows warnings of system malfunctions or incorrectly performed operations. When a message is
shown, perform corrections as indicated in the message.

Master warning light
The master warning light also comes on or flashes in order to indicate
that a message is currently being displayed on the multi-information
display.

Multi-information display
Warning message
Correction procedure
5

■ Warning buzzer

■ If the warning message is shown again after its correction
procedure has been performed
Contact your Toyota dealer as soon as possible.

519

When trouble arises

A buzzer may sound when a warning message is shown on the
multi-information display.

5-2. Steps to take in an emergency

If you have a flat tire
Remove the flat tire and replace it with the spare provided.

■ Before jacking up the vehicle
● Stop the vehicle on a hard, flat surface.
● Set the parking brake.
● Shift the shift lever to P.
● Stop the engine.
● Turn on the emergency flashers.
■ Location of the spare tire, jack and tools
Adapter
socket

Jack handle

Wrench

Towing eyelet

Jack handle

Spare tire

520

Jack

5-2. Steps to take in an emergency

Taking out the jack
STEP 1

Remove the right side deck
board.

STEP 2

Unhook the tightening strap and
remove the pad.
After storing the jack, make
sure it is securely held by the
tightening strap.

STEP 3

Loosen
5

Tighten

When trouble arises
521

5-2. Steps to take in an emergency

Taking out the spare tire
STEP 1

Open the center deck board and
remove the cover.

STEP 2

Remove the cover.
If it is difficult to remove the
cover, you can use the key.

STEP 3

522

Attach the adapter socket (for
removing a spare tire) to the
spare tire clamp bolt.

5-2. Steps to take in an emergency

STEP 4

Assembling the jack handle.
Remove the jack handle and
assemble it by following these
steps.

Loosen the screw.
Assemble the jack handle and
tighten the screw.
Check that the screw is firmly
tightened.

STEP 5

Connect the jack handle and the
adapter socket. Turn the jack
handle.
The tire will be lowered completely to the ground.

When trouble arises
523

5-2. Steps to take in an emergency

STEP 6

Pull out the spare tire and stand
it against the bumper.

STEP 7

Remove the holding bracket.

524

5-2. Steps to take in an emergency

Replacing a flat tire
STEP 1

Chock the tires.

Flat tire

Lefthand
side

Behind the
rear righthand side
tire

Righthand
side

Behind the
rear lefthand side
tire

Lefthand
side

In front of
the front
right-hand
side tire

Righthand
side

In front of
the front
left-hand
side tire

Front

Rear

Slightly loosen the wheel nuts
(one turn).

525

When trouble arises

STEP 2

Wheel
chock
positions

5-2. Steps to take in an emergency

STEP 3

Turn the tire jack portion “A” by
hand until the notch of the jack is
in contact with the jack point.

STEP 4

Raise the vehicle until the tire is
slightly raised off the ground.

STEP 5

Remove all the wheel nuts and
the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.

526

5-2. Steps to take in an emergency

Installing the tire
Remove any dirt or foreign matter from the wheel contact surface.

STEP 1

If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is
in motion, and the tire may
come off the vehicle.
STEP 2

Install the tire and loosely tighten each wheel nut by hand by
approximately the same amount.

Vehicles without compact spare tire
Disc wheel

Turn the nut washers until they
come into contact with the disc
wheel.

Washer
5

Tapered portion

Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel seat.

Disc
wheel
seat

527

When trouble arises

Vehicles with compact spare tire

5-2. Steps to take in an emergency

STEP 3

Lower the vehicle.

STEP 4

Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)

Stowing the flat tire, jack and all tools
STEP 1

Remove the center wheel ornament by pushing from the
reverse side.

STEP 2

Put the flat tire on the ground
with the outer side facing up and
install the holding bracket.
Be careful not to lose the wheel
ornament.

STEP 3

Turn the spare tire clamp bolt clockwise with a jack handle
and adapter socket until you hear a click.

STEP 4

Stow the jack and all tools.

528

5-2. Steps to take in an emergency

■ The compact spare tire
● The compact spare tire is identified by the label “TEMPORARY USE

ONLY” on the tire sidewall.
Use the compact spare tire temporarily only in an emergency.
● Make sure to check the tire inflation pressure of the compact spare

tire. (→P. 563)
■ When using the compact spare tire

As the compact spare tire is not equipped with the tire pressure warning
valve and transmitter, low inflation pressure of the spare tire will not be
warned. Also, if you replace the compact spare tire after the tire pressure
warning light comes on, the light remains on.
■ If you have a flat front tire on a road covered with snow or ice (vehi-

cles with compact spare tire)
Install the spare tire on the rear of the vehicle. Perform the following
steps and fit tire chains to the front tires.
STEP 1

Replace a rear tire with the compact spare tire.

STEP 2

Replace the flat front tire with the tire removed from the rear of
the vehicle.

STEP 3

Fit tire chains to the front tires.

■ After completing the tire change

The tire pressure warning system must be reset. (→P. 457)
When trouble arises
529

5-2. Steps to take in an emergency

CAUTION
■ Using the tire jack

Improper use of the tire jack may lead to death or serious injuries due to
the vehicle suddenly falling off the jack.
● Do not use the tire jack for any purpose other than replacing tires or

installing and removing tire chains.
● Only use the tire jack that comes with this vehicle for replacing a flat

tire.
Do not use it on other vehicles, and do not use other tire jacks for
replacing tires on this vehicle.
● Always check that the tire jack is securely set to the jack point.
● Do not put any part of your body under the vehicle supported by a jack.
● Do not start or run the engine while your vehicle is supported by the

jack.
● Do not raise the vehicle while someone is in it.
● When raising the vehicle, do not put an object on or under the jack.
● Do not raise the vehicle to a height greater than that required to

replace the tire.
● Use a jack stand if it is necessary to get under the vehicle.

Take particular care when lowering the vehicle to ensure that no one
working on or near the vehicle will be injured.

530

5-2. Steps to take in an emergency

CAUTION
■ Replacing a flat tire

Observe the following precautions to reduce the risk of death or serious
injury.
● Never use oil or grease on the wheel bolts or wheel nuts.

Oil and grease may cause the wheel nuts to be excessively tightened,
leading to bolt or disc wheel damage. In addition, the oil or grease can
cause the wheel nuts to loosen and the wheel may fall off, causing a
serious accident. Remove any oil or grease from the wheel bolts or
wheel nuts.
● Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103

N•m, 10.5 kgf•m) as soon as possible after changing wheels.
Failure to follow these precautions could cause the nuts to loosen and
the wheel may fall off, which could lead to an accident causing death
or serious injury.
■ When using the compact spare tire
● Remember that your compact spare tire is specifically designed for

use with your vehicle. Do not use your compact spare tire on another
vehicle.
● Do not use two compact spare tires simultaneously.
● Replace the compact spare tire with a standard tire as soon as possi-

ble.
cornering.
■ Speed limit when using the compact spare tire

Do not drive at speeds in excess of 50 mph (80 km/h) when a compact
spare tire is installed on the vehicle.
The compact spare tire is not designed for driving at high speeds. Failing
to observe this precaution may lead to an accident causing death or serious injury.

531

When trouble arises

● Avoid sudden acceleration, deceleration and braking, as well as sharp

5-2. Steps to take in an emergency

CAUTION
■ When the compact spare tire is attached

The vehicle speed may not be correctly detected, and the following systems may not operate correctly:
● ABS & Brake assist
● Enhanced VSC
● TRAC
● Cruise control system (if equipped)
● Navigation system (if equipped)

Also, not only can be following system not be utilized fully, it may actually
negatively effect the drive-train components:
(4WD models)
● 4WD system

532

5-2. Steps to take in an emergency

NOTICE
■ Do not drive the vehicle with a flat tire.

Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and the
wheel beyond repair.
■ Be careful when driving over bumps with the compact spare tire

installed on the vehicle.
The vehicle becomes lower when driving with the compact spare tire
compared to when driving with standard tires. Be careful when driving
over uneven road surfaces.
■ Driving with tire chains and the compact spare tire

Do not fit tire chains to the compact spare tire.
Tire chains may damage the vehicle body and adversely affect driving
performance.
■ When replacing the tires

When removing or fitting the wheels, tires or the tire pressure warning
valve and transmitter, contact your Toyota dealer as the tire pressure
warning valve and transmitter may be damaged if not handled correctly.
■ To avoid damaging the tire pressure warning valves and transmit-

ters

Do not use liquid sealants on flat tires.
● Ensure that there is no object caught between the tire and the vehicle

underbody.
● Tighten the spare tire clamp bolt to hold the spare wheel carrier by the

hook securely.

533

When trouble arises

■ When stowing the flat tire

5-2. Steps to take in an emergency

If the engine will not start
If the engine still does not start after following the correct starting
procedure (→P. 166, 170) or releasing the steering lock (→P. 168,
171), confirm the following points.

■ The engine will not start even when the starter motor operates normally.
One of the following may be the cause of the problem.
● There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle.
● The engine may be flooded.
Try to restart the engine once more following correct starting
procedures. (→P. 166, 170)
● There may be a malfunction in the engine immobilizer system
(if equipped). (→P. 110)
■ The starter motor turns over slowly, the interior lights and
headlights are dim, or the horn does not sound or sounds at
a low volume.
One of the following may be the cause of the problem.
● The battery may be discharged. (→P. 540)
● The battery terminal connections may be loose or corroded.
■ The starter motor does not turn over (vehicles with smart
key system).
The engine starting system may be malfunctioning due to an
electrical problem such as an open circuit or a blown fuse. However, an interim measure is available to start the engine.
(→P. 535)

534

5-2. Steps to take in an emergency

■ The starter motor does not turn over, the interior lights and
headlights do not turn on, or the horn does not sound.
One of the following may be the cause of the problem.
● One or both of the battery terminals may be disconnected.
● The battery may be discharged. (→P. 540)
● There may be a malfunction in the steering lock system (vehicles with smart key system).
Contact your Toyota dealer if the problem cannot be repaired, or if
repair procedures are unknown.

Emergency start function (vehicles with smart key system)
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the “ENGINE START STOP”
switch is functioning normally.
STEP 1

Set the parking brake.

STEP 2

Shift the shift lever to P.

STEP 3

Set the “ENGINE START STOP” switch to ACCESSORY
mode.

STEP 4

Push and hold the “ENGINE START STOP” switch about 15
seconds while depressing the brake pedal firmly.

535

When trouble arises

Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by your Toyota
dealer.

5-2. Steps to take in an emergency

If the shift lever cannot be shifted from P
If the shift lever cannot be shifted with your foot on the brake, there
may be a problem with the shift lock system (a system to prevent
accidental operation of the shift lever). Have the vehicle inspected by
your Toyota dealer immediately.
The following steps may be used as an emergency measure to
ensure that the shift lever can be shifted.
STEP 1

Set the parking brake.

STEP 2

Vehicles without smart key system: Turn the engine switch
to the “ACC” position.
Vehicles with smart key system: Turn the “ENGINE START
STOP” switch to ACCESSORY mode.

STEP 3

Depress the brake pedal.

STEP 4

Pry the cover up with a flathead screwdriver or equivalent.

STEP 5

Press the shift lock override
button.
The shift lever can be shifted
while the button is pressed.

536

5-2. Steps to take in an emergency

If you lose your keys/wireless remote control transmitter
■ Keys
New genuine keys can be made by your Toyota dealer.
For vehicles with the smart key system, bring the other key and
the key number stamped on the key number plate.
For vehicles without the smart key system, bring a master key
and the key number stamped on the key number plate.
■ Wireless remote control transmitter (vehicles without smart
key system)
New genuine wireless remote control transmitters can be purchased and programmed by your Toyota dealer. If a wireless
remote control transmitter has been lost, bring the other wireless
remote control transmitter when going to pick up the new transmitter.

When trouble arises
537

5-2. Steps to take in an emergency

If the electronic key does not operate properly (vehicles with smart key system)
If communication between the electronic key and vehicle is interrupted (→P. 38) or the electronic key cannot be used because the
battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened or the
engine can be started by following the procedure below.

Locking and unlocking the doors, and mechanical key linked functions
Using the mechanical key (→P. 31)
in order to perform the following
operations:
Locks all doors
Unlocks all doors
Turning the key rearward unlocks
the driver’s door. Turning the key
once again unlocks the other
doors.

Changing “ENGINE START STOP” switch modes and starting the engine
STEP 1
STEP 2

Shift the shift lever to P and apply the brakes.
Touch the Toyota emblem side of
the electronic key to the
“ENGINE START STOP” switch.
If any of the doors is opened and
closed while the key is being
touched to the switch, an alarm
will sound to indicate that the start
function cannot detect the electronic key.

538

5-2. Steps to take in an emergency

STEP 3

To change “ENGINE START STOP” switch modes: Within 5
seconds of the buzzer sounding, release the brake pedal and
press the “ENGINE START STOP” switch. Modes can be
changed each time the switch is pressed. (→P. 167)
To start the engine: Press the “ENGINE START STOP” switch
within 5 seconds after the buzzer sounds, keeping the brake
pedal depressed.

In the event that the “ENGINE START STOP” switch still cannot be
operated, contact your Toyota dealer.
■ Stopping the engine
Shift the shift lever to P and press the “ENGINE START STOP” switch as
you normally do when stopping the engine.
■ Replacing the electronic key battery
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery depletes.
(→P. 474)

When trouble arises
539

5-2. Steps to take in an emergency

If the battery is discharged
The following procedures may be used to start the engine if the vehicle's battery is discharged.
You can call your Toyota dealer or qualified repair shop.

If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your Toyota following
the steps below.
STEP 1

Connect the jumper cables.

2.7 L 4-cylinder (1AR-FE) engine

540

5-2. Steps to take in an emergency

3.5 L V6 (2GR-FE) engine

Positive (+) battery terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
Start the engine of the second vehicle. Increase the engine
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.

STEP 3

Vehicles with smart key system:
Open and close any of the doors with the “ENGINE START
STOP” switch OFF.

541

When trouble arises

STEP 2

5-2. Steps to take in an emergency

STEP 4

Vehicles without smart key system:
Maintain the engine speed of the second vehicle, and turn
the engine switch to the “ON” position, then start the vehicle's engine.
Vehicles with smart key system:
Maintain the engine speed of the second vehicle, and turn
the “ENGINE START STOP” switch to IGNITION ON mode,
then start the vehicle's engine.

STEP 5

Once the vehicle’s engine has started, remove the jumper
cables in the exact reverse order in which they were connected.

Once the engine starts, have the vehicle checked at your Toyota
dealer as soon as possible.

■ Starting the engine when the battery is discharged
The engine cannot be started by push-starting.
■ To prevent battery discharge
● Turn off the headlights and the audio system while the engine is turned
off.
● Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic, etc.
■ When the battery is removed or discharged
● The power back door must be initialized (→P. 61)
● The tire inflation pressure warning system must be initialized. (→P. 457)

542

5-2. Steps to take in an emergency

CAUTION
■ Avoiding battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery.
● Make sure the jumper cable is connected to the correct terminal and that it
is not unintentionally in contact with any part other than the intended terminal.
● Do not allow the + and - clamps of the jumper cables to come into contact
with each other.
● Do not smoke, use matches, cigarette lighters or allow open flame near
the battery.
■ Battery precautions
The battery contains poisonous and corrosive acidic electrolyte, while
related parts contain lead and lead compounds. Observe the following precautions when handling the battery.
● When working with the battery, always wear safety glasses and take care
not to allow any battery fluids (acid) to come into contact with skin, clothing
or the vehicle body.
● Do not lean over the battery.

● Always wash your hands after handling the battery support, terminals, and
other battery-related parts.
● Do not allow children near the battery.

NOTICE
■ When handling jumper cables
Be careful that the jumper cables do not become tangled in the cooling fan
or any of the belts when connecting or disconnecting them.

543

When trouble arises

● In the event that battery fluid comes into contact with the skin or eyes,
immediately wash the affected area with water and seek medical attention.
Place a wet sponge or cloth over the affected area until medical attention
can be received.

5-2. Steps to take in an emergency

If your vehicle overheats
If your engine overheats:
STEP 1

Stop the vehicle in a safe place and turn off the air conditioning system.

STEP 2

Check to see if steam is coming out from under the hood.
If you see steam:
Stop the engine. Carefully lift the hood after the steam
subsides and then restart the engine.
If you do not see steam:
Leave the engine running and carefully lift the hood.

STEP 3

Remove the engine compartment cover. (→P. 442)

STEP 4

Check to see if the cooling fans are operating.
If the fans are operating:
Wait until the temperature of the engine (shown on the
instrument cluster) begins to fall and then stop the
engine.
If the fans are not operating:
Stop the engine and call your Toyota dealer.

STEP 5

After the engine has cooled
down sufficiently, check the
engine coolant level and
inspect the radiator core (radiator) for any leaks.
Engine coolant reservoir
Radiator

544

5-2. Steps to take in an emergency

STEP 6

Add engine coolant if necessary.
Water can be used in an emergency if engine coolant is
unavailable. (→P. 559)

Have the vehicle checked at the nearest Toyota dealer as soon as
possible.

■ Overheating
If you observe the following, your vehicle may be overheating.
● The engine coolant temperature gauge enters the red zone or a loss of
power is experienced.
● Steam comes from under the hood.
5

CAUTION

● If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, causing serious injury such as burns.
● Keep hands and clothing away from the fan and other belts while the
engine is running.
● Do not loosen the coolant reservoir cap while the engine and radiator are
hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.

545

When trouble arises

■ To prevent an accident or injury when inspecting under the hood of
your vehicle

5-2. Steps to take in an emergency

NOTICE
■ When adding engine coolant
Wait until the engine has cooled down before adding engine coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot engine too
quickly can cause damage to the engine.

546

5-2. Steps to take in an emergency

If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle
becomes stuck in mud, dirt, or snow.
STEP 1

Stop the engine. Set the parking brake and put the shift
lever to P.

STEP 2

Remove the mud, snow, or sand from around the stuck tire.

STEP 3

Place wood, stones or some other material to help provide
traction under the tires.

STEP 4

Restart the engine.

STEP 5

Shift the shift lever to the D or R position and carefully apply
the accelerator to free the vehicle.
Turn off TRAC and/or Enhanced VSC if these functions are hampering your attempts to free the vehicle. (→P. 212)

CAUTION
■ When attempting to free a stuck vehicle
If you choose to rock the vehicle back and forth to free it, make sure the surrounding area is clear, to avoid striking other vehicles, objects or persons.
The vehicle may also lunge forward or lunge back suddenly as it becomes
free. Use extreme caution.
Be careful not to shift the shift lever with the accelerator pedal depressed.
This may lead to unexpected rapid acceleration of the vehicle that may
cause an accident and result in death or serious injury.

547

When trouble arises

■ When shifting the shift lever

5-2. Steps to take in an emergency

NOTICE
■ To avoid damaging the transmission and other components
● Avoid spinning the wheels and do not rev the engine.
● If the vehicle remains stuck after trying these procedures, the vehicle may
require towing to be freed.

548

5-2. Steps to take in an emergency

If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop the
vehicle in the normal way, stop the vehicle using the following procedure:
STEP 1

Steadily step on the brake pedal with both feet and firmly
depress it.
Do not pump the brake pedal repeatedly as this will increase the
effort required to slow the vehicle.

STEP 2

Shift the shift lever to N.

If the shift lever is shifted to N
STEP 3

After slowing down, stop the vehicle in a safe place by the
road.

STEP 4

Stop the engine.

If the shift lever cannot be shifted to N
STEP 3

Keep depressing the brake pedal with both feet to reduce
vehicle speed as much as possible.

STEP 4

Vehicles without a smart key
system: Stop the engine by
turning the engine switch to
the “ACC” position.

When trouble arises
549

5-2. Steps to take in an emergency

Vehicles with a smart key system: Stop the engine by pressing and holding the “ENGINE
START STOP” switch for 3
consecutive seconds or more.

STEP 4

Press and hold for 3 seconds or more

STEP 5

Stop the vehicle in a safe place by the road.

CAUTION
■ If the engine has to be turned off while driving
● Power assist for the brakes and steering wheel will be lost, making the
brake pedal harder to depress and the steering wheel heavier to turn.
Decelerate as much as possible before turning off the engine.
● Vehicles without a smart key system: Never attempt to remove the key, as
doing so will lock the steering wheel.

550

6-1. Specifications

Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall length

188.4 in. (4785 mm)

Overall width

75.2 in. (1910 mm)
Without roof rails
68.1 in. (1730 mm)
With roof rails
69.3 in. (1760 mm)

Overall height

Wheelbase

109.8 in. (2790 mm)

Front tread

64.0 in. (1625 mm)

Rear tread

2WD models

64.2 in. (1630 mm)

4WD models

64.0 in. (1625 mm)

Vehicle capacity weight
(Occupant + luggage)
Towing
capacity
(Trailer
weight +
cargo)

*1:
*2:

552

1200 lb. (544 kg)

2.7 L 4-cylinder (1AR-FE)
engine

1500 lb. (680 kg)*1
3500 lb. (1500 kg)*2

3.5 L V6
(2GR-FE)
engine

2000 lb. (900 kg)*1
5000 lb. (2000 kg)*2

Without towing package
With towing package

6-1. Specifications

Vehicle identification
■ Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for your
vehicle. This is the primary identification number for your Toyota. It is
used in registering the ownership of your vehicle.
This number is also stamped on
the top left of the instrument
panel.

■ Certification Label
This number is also on the Certification Label on the driver’s side
center pillar.

Vehicle specifications
553

6-1. Specifications

■ Engine number
The engine number is stamped on the engine block as shown.
2.7 L 4-cylinder (1AR-FE) engine

3.5 L V6 (2GR-FE) engine

554

6-1. Specifications

Engine
Model

1AR-FE

2GR-FE

Type

4-cylinder in line,
4-cycle, gasoline

6-cylinder V type,
4-cycle, gasoline

Bore and stroke

3.54 × 4.13 in.
(90.0 × 105.0 mm)

3.70 × 3.27 in.
(94.0 × 83.0 mm)

Displacement

163.1 cu.in. (2672 cm3)

210.9 cu.in. (3456 cm3)

Drive belt tension

Automatic adjustment

Fuel
Fuel type

Unleaded gasoline only

Octane rating

87 (Research Octane Number 91) or higher

Fuel tank capacity
(Reference)

19.2 gal. (72.5 L, 15.9 Imp. gal.)

Vehicle specifications
555

6-1. Specifications

Lubrication system (2.7 L 4-cylinder [1AR-FE] engine)
Oil capacity
(Drain and refill ⎯
reference)
Without filter
With filter

4.2 qt. (4.0 L, 3.5 Imp. qt.)
4.6 qt. (4.4 L, 3.9 Imp. qt.)

■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 5W-20 or 0W-20
SAE 5W-20 or 0W-20 engine oil
may be used. However, SAE
0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
Outside temperature

The 0W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehicle is operated at high speeds, or under extreme load conditions.

556

6-1. Specifications

How to read oil container label:
The ILSAC (International Lubricant Standardization and Approval
Committee) Certification Mark is added to some oil containers to help
you select the oil you should use.

Vehicle specifications
557

6-1. Specifications

Lubrication system (3.5 L V6 [2GR-FE] engine)
Oil capacity
(Drain and refill ⎯
reference)
Without filter
With filter

6.0 qt. (5.7 L, 5.0 Imp. qt.)
6.4 qt. (6.1 L, 5.4 Imp. qt.)

■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good
starting in cold weather.

Outside temperature

If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.

558

6-1. Specifications

Cooling system

3.5 L V6
(2GR-FE)
engine

Without rear air conditioning system
9.3 qt. (8.8 L, 7.7 Imp. qt.)
10.0 qt. (9.5 L, 8.4 Imp. qt.)*
With rear air conditioning system
11.6 qt. (11.0 L, 9.7 Imp. qt.)
12.4 qt. (11.7 L, 10.3 Imp. qt.)*

Capacity
(Reference)

Coolant type

Use either of the following.
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based
non-silicate, non-amine, non-nitrite, and
non-borate coolant with long-life hybrid
organic acid technology
Do not use plain water alone.

*: With towing package
559

Vehicle specifications

2.7 L 4-cylinder (1AR-FE)
engine

Without rear air conditioning system
7.3 qt. (6.9 L, 6.1 Imp. qt.)
8.0 qt. (7.6 L, 6.7 Imp. qt.)*
With rear air conditioning system
9.6 qt. (9.1 L, 8.0 Imp. qt.)
10.4 qt. (9.8 L, 8.6 Imp. qt.)*

6-1. Specifications

Ignition system
Spark plug
Make

Gap

2.7 L 4-cylinder (1AR-FE) engine
DENSO, SK16HR11
3.5 L V6 (2GR-FE) engine
DENSO FK20HR11
0.043 in. (1.1 mm)

NOTICE
■ Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.

Electrical system
Battery

Open voltage* at
68°F (20°C):

12.6 ⎯ 12.8 V Fully charged
12.2 ⎯ 12.4 V Half charged
11.8 ⎯ 12.0 V Discharged
(*: Voltage is checked 20 minutes
after the engine and all the lights are
turned off)

Charging rates

5 A max.

560

6-1. Specifications

Rear differential (4WD models)
Oil capacity

1.0 qt. (0.9 L, 0.8 Imp. qt.)

Oil type

Hypoid gear oil API GL-5

Recommended oil viscosity

Above 0°F (-18°C): SAE 90
Below 0°F (-18°C): SAE 80W or 80W-90

Automatic transaxle

Fluid capacity*

Fluid type

2.7 L 4-cylinder (1AR-FE) engine
6.9 qt. (6.5 L, 5.7 Imp. qt.)
3.5 L V6 (2GR-FE) engine
2WD models:
9.3 qt. (8.8 L, 7.7 Imp. qt.)
4WD models:
9.5 qt. (9.0 L, 7.9 Imp. qt.)
Toyota Genuine ATF WS

*: The fluid capacity is a reference quantity. If replacement is necessary,
contact your Toyota dealer.
NOTICE
■ Automatic transmission fluid type

561

Vehicle specifications

Using automatic transmission fluid other than “Toyota Genuine ATF WS”
may cause deterioration in shift quality, locking up of your transmission
accompanied by vibration, and ultimately damage the automatic transmission of your vehicle.

6-1. Specifications

Transfer (4WD models)
Oil capacity

1.0 qt. (0.9 L, 0.8 Imp. qt.)

Oil type

Hypoid gear oil API GL-5

Recommended oil viscosity

Above 0°F (-18°C): SAE 90
Below 0°F (-18°C): SAE 80W or 80W-90

Brakes
Pedal clearance*1

3.3 in. (84.4 mm) Min.

Pedal free play

0.08 ⎯ 0.12 in. (2 ⎯ 3 mm)

Brake pad wear limit

0.04 in. (1.0 mm)

Parking brake lining wear limit

0.04 in. (1.0 mm)

Parking brake pedal travel*2

8 ⎯ 10 clicks

Fluid type

SAE J1703 or FMVSS No.116 DOT 3

*1: Minimum pedal clearance when depressed with a force of 110 lbf (490 N,
50 kgf) while the engine is running
*2: Parking brake pedal travel when depressed with a force of 67 lbf (300 N, 30
kgf)

Steering
Free play

562

Less than 1.2 in. (30 mm)

6-1. Specifications

Tires and wheels
Type A
Tire size

P245/65R17 105S

Tire inflation pressure
(Recommended cold tire
inflation pressure)

Driving under normal conditions
Front:
30 psi (210 kPa, 2.1 kgf/cm2 or bar)
Rear:
30 psi (210 kPa, 2.1 kgf/cm2 or bar)
Spare:
30 psi (210 kPa, 2.1 kgf/cm2 or bar)
Driving at high speeds above 100 mph
(160 km/h) (in countries where such speeds
are permitted by law)
Add 5 psi (30 kPa, 0.3 kgf/cm2 or bar) to the
front tires and rear tires. Never exceed the
maximum cold tire inflation pressure indicated on the tire sidewall.

Wheel size

17 × 7 1/2 J

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

Vehicle specifications
563

6-1. Specifications

Type B
Tire size

P245/55R19 103S

Tire inflation pressure
(Recommended cold tire
inflation pressure)

Wheel size

19 × 7 1/2 J

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

564

6-1. Specifications

Type C
Tire size

P245/55R19 103S, T165/90D18 107M
(spare)

Tire inflation pressure
(Recommended cold tire
inflation pressure)

Driving under normal conditions
Front:
30 psi (210 kPa, 2.1 kgf/cm2 or bar)
Rear:
30 psi (210 kPa, 2.1 kgf/cm2 or bar)
Driving at high speeds above 100 mph
(160 km/h) (in countries where such
speeds are permitted by law)
Add 5 psi (30 kPa, 0.3 kgf/cm2 or bar) to
the front tires and rear tires. Never
exceed the maximum cold tire inflation
pressure indicated on the tire sidewall.
When towing trailer
Add 6 psi (40 kPa, 0.4 kgf/cm2 or bar) to
the rear tires. Never exceed the maximum cold tire inflation pressure indicated
on the tire sidewall.
Spare:
60 psi (420 kPa, 4.2 kgf/cm2 or bar)

Wheel size

19 × 7 1/2 J, 18 × 4T (spare)

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

Vehicle specifications
565

6-1. Specifications

Light bulbs
Light Bulbs

Bulb No.

Type

9005
⎯

60
55

C
A

3457NA

28/8

Fog lights*

⎯

Rear turn signal lights

⎯

Back-up lights

921

Stop/tail and rear side marker
lights

7443

21/5

License plate lights

⎯

Outer foot lights*

⎯

Vanity lights

⎯

Personal/interior lights (front)

⎯

Personal lights (center)*

⎯

Interior lights (center*/rear)

⎯

168

Headlights
High beam
Low beam
Parking, front side marker and
front turn signal lights
Exterior

Interior

Door courtesy lights
A: H11 halogen bulbs
C: HB3 halogen bulbs
E: PSX26W

566

If equipped

B: Wedge base bulbs (amber)
D: Wedge base bulbs (clear)
F: Double end bulbs

6-1. Specifications

Fuel information
Your vehicle must use only unleaded gasoline.
Select octane rating 87 (Research Octane Number 91) or higher. Use
of unleaded gasoline with an octane rating lower than 87 may result
in engine knocking. Persistent knocking can lead to engine damage.

At minimum, the gasoline you use should meet the specifications
of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada.

■ Fuel tank opening for unleaded gasoline
To help prevent incorrect fueling, your Toyota has a fuel tank opening that
only accommodates the special nozzle on unleaded fuel pumps.
■ If your engine knocks
● Consult your Toyota dealer.
● You may occasionally notice light knocking for a short time while accelerating or driving uphill. This is normal and there is no need for concern.
■ Gasoline quality
In very few cases, driveability problems may be caused by the brand of gasoline you are using. If driveability problems persist, try changing the brand of
gasoline. If this does not correct the problem, consult your Toyota dealer.
■ Gasoline quality standards
● Automotive manufacturers in the US, Europe and Japan have developed
a specification for fuel quality called the World-Wide Fuel Charter
(WWFC) that is expected to be applied worldwide.

● The WWFC consists of four categories that are based on required emission levels. In the US, category 4 has been adopted.

567

Vehicle specifications

● The WWFC improves air quality by lowering emissions in vehicle fleets,
and customer satisfaction through better performance.

6-1. Specifications

■ Toyota recommends the use of gasoline containing detergent additives
● Toyota recommends the use of gasoline that contains detergent additives
to avoid build-up of engine deposits.
● All gasoline sold in the US contains detergent additives to clean and/or
keep clean intake systems.
■ Toyota recommends the use of cleaner burning gasoline
Cleaner burning gasoline, including reformulated gasoline that contains oxygenates such as ethanol or MTBE (Methyl Tertiary Butyl Ether) is available in
many areas.
Toyota recommends the use of cleaner burning gasoline and appropriately
blended reformulated gasoline. These types of gasoline provide excellent
vehicle performance, reduce vehicle emissions and improve air quality.
■ Toyota does not recommend blended gasoline
● Toyota allows the use of oxygenate blended gasoline where the oxygenate content is up to 10% ethanol or 15% MTBE.
● If you use gasohol in your Toyota, be sure that it has an octane rating no
lower than 87.
● Toyota does not recommend the use of gasoline containing methanol.
■ Toyota does not recommend gasoline containing MMT
Some gasoline contains octane enhancing additive called MMT (Methylcyclopentadienyl Manganese Tricarbonyl).
Toyota does not recommend the use of gasoline that contains MMT. If fuel
containing MMT is used, your emission control system may be adversely
affected.
The malfunction indicator lamp on the instrument cluster may come on. If
this happens, contact your Toyota dealer for service.

568

6-1. Specifications

NOTICE
■ Notice on fuel quality
● Do not use improper fuels. If improper fuels are used the engine will be
damaged.
● Do not use leaded gasoline.
Leaded gasoline will cause the three-way catalytic converter to lose its
effectiveness and the emission control system to function improperly.
● Do not use gasohol other than that stated here.
Other gasohol may cause fuel system damage or vehicle performance
problems.
■ Fuel-related poor driveability
If after using a different type of fuel, poor driveability is encountered (poor
hot starting, vaporization, engine knocking, etc.), discontinue the use of that
type of fuel.
■ When refueling with gasohol
Take care not to spill gasohol. It can damage your vehicle's paint.

Vehicle specifications
569

6-1. Specifications

Tire information
Typical tire symbols

Full-size spare tire

Compact spare tire

Tire size

(→P. 573)

DOT and Tire Identification Number (TIN)

(→P. 572)

Uniform tire quality grading
For details, see “Uniform tire quality grading” that follows.

Location of treadwear indicators
570

(→P. 455)

6-1. Specifications

Tire ply composition and materials
Plies are layers of rubber-coated parallel cords. Cords are the
strands which form the plies in a tire.

Radial tires or bias-ply tires
A radial tire has “RADIAL” on the sidewall. A tire not marked
“RADIAL” is a bias-ply tire.

TUBELESS or TUBE TYPE
A tubeless tire does not have a tube and air is directly filled in the
tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.

Load limit at maximum cold tire inflation pressure

(→P. 460)

Maximum cold tire inflation pressure

(→P. 563)

This means the pressure to which a tire may be inflated.

Summer tire or all season tire

(→P. 460)

An all season tire has “M+S” on the sidewall. A tire not marked
“M+S” is a summer tire.

“TEMPORARY USE ONLY”

(→P. 529)

A compact spare tire is identified by the phrase “TEMPORARY USE
ONLY” molded into its sidewall. This tire is designed for temporary
emergency use only.

Vehicle specifications
571

6-1. Specifications

Typical DOT and tire identification number (TIN)
DOT symbol*
Tire Identification
(TIN)

Number

Tire manufacturer's identification mark
Tire size code
Manufacturer's optional
type code (3 or 4 letters)

tire

Manufacturing week
Manufacturing year
*: The DOT symbol certifies that
the tire conforms to applicable
Federal Motor Vehicle Safety
Standards.

572

6-1. Specifications

Tire size
■ Typical tire size information
The illustration indicates typical
tire size.
Tire use
(P = Passenger car,
T = Temporary use)
Section width (millimeters)
Aspect ratio
(tire height to section width)
Tire construction code
(R = Radial, D = Diagonal)
Wheel diameter (inches)
Load index (2 digits or 3 digits)
Speed symbol
(alphabet with one letter)
■ Tire dimensions
Section width
Tire height
Wheel diameter
6

Vehicle specifications
573

6-1. Specifications

Tire section names
Bead
Sidewall
Shoulder
Tread
Belt
Inner liner
Reinforcing rubber
Carcass
Rim lines
Bead wires
Chafer
Uniform Tire Quality Grading
This information has been prepared in accordance with regulations
issued by the National Highway Traffic Safety Administration of the
U.S. Department of Transportation.
It provides the purchasers and/or prospective purchasers of Toyota
vehicles with information on uniform tire quality grading.
Your Toyota dealer will help answer any questions you may have as
you read this information.

■ DOT quality grades
All passenger vehicle tires must conform to Federal Safety
Requirements in addition to these grades. Quality grades can be
found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example: Treadwear 200 Traction AA Temperature A

574

6-1. Specifications

■ Treadwear
The treadwear grade is a comparative rating based on the wear
rate of the tire when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one and a half (1 - 1/2)
times as well on the government course as a tire graded 100.
The relative performance of tires depends upon the actual conditions
of their use, however, and may depart significantly from the norm due
to variations in driving habits, service practices and differences in
road characteristics and climate.

■ Traction AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B and C,
and they represent the tire's ability to stop on wet pavement as
measured under controlled conditions on specified government
test surfaces of asphalt and concrete.
A tire marked C may have poor traction performance.
Warning: The traction grade assigned to this tire is based on braking
(straight ahead) traction tests and does not include cornering (turning) traction.

■ Temperature A, B, C
The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to
dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.

The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109.
Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

575

Vehicle specifications

Sustained high temperature can cause the material of the tire to
degenerate and reduce tire life, and excessive temperature can lead
to sudden tire failure.

6-1. Specifications

Warning: The temperature grades for this tire are established for a
tire that is properly inflated and not overloaded.
Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.

Glossary of tire terminology
Tire related term

Meaning

Cold tire inflation pressure

Tire pressure when the vehicle has been
parked for three hours or more, or has not
been driven more than 1 mile or 1.5 km under
that condition

Maximum inflation
pressure

The maximum cold inflated pressure to which a
tire may be inflated, shown on the sidewall of
the tire

Recommended inflation pressure

Cold tire inflation pressure recommended by a
manufacturer

Accessory weight

The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power
brakes, power windows, power seats, radio
and heater, to the extent that these items are
available as factory-installed equipment
(whether installed or not)

Curb weight

The weight of a motor vehicle with standard
equipment, including the maximum capacity of
fuel, oil and coolant, and if so equipped, air
conditioning and additional weight optional
engine

Maximum loaded vehicle weight

The sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight
(d) Production options weight

576

6-1. Specifications

Tire related term

Meaning
150 lb. (68 kg) times the number of occupants
specified in the second column of Table 1* that
follows

Occupant distribution

Distribution of occupants in a vehicle as specified in the third column of Table 1* below

Production options
weight

The combined weight of installed regular production options weighing over 5 lb. (2.3 kg) in
excess of the standard items which they
replace, not previously considered in curb
weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy duty
12-volt battery, and special trim

Rim

A metal support for a tire or a tire and tube
assembly upon which the tire beads are seated

Rim diameter
(Wheel diameter)

Nominal diameter of the bead seat

Rim size designation

Rim diameter and width

Rim type designation

The industry manufacturer's designation for a
rim by style or code

Rim width

Nominal distance between rim flanges

Vehicle capacity
weight (Total load
capacity)

The rated cargo and luggage load plus 150 lb.
(68 kg) times the vehicle's designated seating
capacity

Vehicle maximum load
on the tire

The load on an individual tire that is determined
by distributing to each axle its share of the
maximum loaded vehicle weight, and dividing
by two

Vehicle normal load
on the tire

The load on an individual tire that is determined
by distributing to each axle its share of curb
weight, accessory weight, and normal occupant weight (distributed in accordance with
Table 1* below), and dividing by two

577

Vehicle specifications

Normal occupant
weight

6-1. Specifications

Tire related term

Meaning

Weather side

The surface area of the rim not covered by the
inflated tire

Bead

The part of the tire that is made of steel wires,
wrapped or reinforced by ply cords and that is
shaped to fit the rim

Bead separation

A breakdown of the bond between components
in the bead

Bias ply tire

A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate angles
substantially less than 90 degrees to the centerline of the tread

Carcass

The tire structure, except tread and sidewall
rubber which, when inflated, bears the load

Chunking

The breaking away of pieces of the tread or
sidewall

Cord

The strands forming the plies in the tire

Cord separation

The parting of cords from adjacent rubber compounds

Cracking

Any parting within the tread, sidewall, or innerliner of the tire extending to cord material

A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and the
tire is designed to fit on the underside of the
rim in a manner that encloses the rim flanges
inside the air cavity of the tire

Extra load tire

A tire designed to operate at higher loads and
at higher inflation pressures than the corresponding standard tire

Groove

The space between two adjacent tread ribs

Innerliner

The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire

578

6-1. Specifications

Tire related term

Meaning
The parting of the innerliner from cord material
in the carcass

Intended outboard
sidewall

(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufacturer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asymmetrical tire that has a particular side that
must always face outward when mounted
on a vehicle

Light truck (LT) tire

A tire designated by its manufacturer as primarily intended for use on lightweight trucks or
multipurpose passenger vehicles

Load rating

The maximum load that a tire is rated to carry
for a given inflation pressure

Maximum load rating

The load rating for a tire at the maximum permissible inflation pressure for that tire

Maximum permissible
inflation pressure

The maximum cold inflation pressure to which
a tire may be inflated

Measuring rim

The rim on which a tire is fitted for physical
dimension requirements

Open splice

Any parting at any junction of tread, sidewall, or
innerliner that extends to cord material

Outer diameter

The overall diameter of an inflated new tire

Overall width

The linear distance between the exteriors of
the sidewalls of an inflated tire, including elevations due to labeling, decorations, or protective
bands or ribs

Passenger car tire

A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, that
have a gross vehicle weight rating (GVWR) of
10,000 lb. or less.
579

Vehicle specifications

Innerliner separation

6-1. Specifications

Tire related term

Meaning

Ply

A layer of rubber-coated parallel cords

Ply separation

A parting of rubber compound between adjacent plies

Pneumatic tire

A mechanical device made of rubber, chemicals, fabric and steel or other materials, that,
when mounted on an automotive wheel, provides the traction and contains the gas or fluid
that sustains the load

Radial ply tire

A pneumatic tire in which the ply cords that
extend to the beads are laid at substantially 90
degrees to the centerline of the tread

Reinforced tire

A tire designed to operate at higher loads and
at higher inflation pressures than the corresponding standard tire

Section width

The linear distance between the exteriors of
the sidewalls of an inflated tire, excluding elevations due to labeling, decoration, or protective bands

Sidewall

That portion of a tire between the tread and
bead

Sidewall separation

The parting of the rubber compound from the
cord material in the sidewall

Snow tire

A tire that attains a traction index equal to or
greater than 110, compared to the ASTM
E-1136 Standard Reference Test Tire, when
using the snow traction test as described in
ASTM F-1805-00, Standard Test Method for
Single Wheel Driving Traction in a Straight Line
on Snow-and Ice-Covered Surfaces, and which
is marked with an Alpine Symbol (
least one sidewall

Test rim
580

) on at

The rim on which a tire is fitted for testing, and
may be any rim listed as appropriate for use
with that tire

6-1. Specifications

Tire related term

Meaning

Tread

That portion of a tire that comes into contact
with the road

Tread rib

A tread section running circumferentially
around a tire

Tread separation

Pulling away of the tread from the tire carcass

Treadwear indicators
(TWI)

The projections within the principal grooves
designed to give a visual indication of the
degrees of wear of the tread

Wheel-holding fixture

The fixture used to hold the wheel and tire
assembly securely during testing

Table 1 ⎯ Occupant loading and distribution for vehicle normal load
for various designated seating capacities
Designated seating
capacity, Number of
occupants

Vehicle normal load,
Number of occupants

Occupant distribution in
a normally loaded vehicle

2 through 4

2 in front

5 through 10

2 in front, 1 in second
seat

11 through 15

2 in front, 1 in second
seat, 1 in third seat, 1
in fourth seat

2 in front, 2 in second
seat, 2 in third seat, 1
in fourth seat

16 through 20

Vehicle specifications

581

6-2. Customization

Customizable features
Your vehicle includes a variety of electronic features that can be
personalized to your preferences. Programming these preferences
requires specialized equipment and may be performed by your
Toyota dealer.
Some function settings are changed simultaneously with other functions
being customized. Contact your Toyota dealer.

Item

Door lock
(→P. 52,
538)

Smart key
system
(→P. 33)

582

Function

Default setting

Customized
setting

Speed-detecting automatic door lock function

Off

Opening driver's door
unlocks all doors

Off

Shifting gears to a P
unlocks all doors

Off

Shifting gears to position other than P locks
all doors

Off

Unlocking using a key

Driver's door
unlocked in one
step, all doors
unlocked in two
steps

All doors
unlocked in one
step

Smart key system

Off

Operation signal
(Emergency flashers)

Off

6-2. Customization

Item

Function

Default setting

Customized
setting

Wireless remote control

Off

Driver's door
unlocked in one
step, all doors
unlocked in two
steps

All doors
unlocked in one
step

Off

Unlocking operation

Automatic door lock
function to be activated
if door is not opened
after being unlocked
Wireless
remote control
(→P. 46)

Time elapsed before
automatic door lock
function is activated if
door is not opened after
being unlocked

30 seconds
60 seconds
120 seconds

Operation signal
(Emergency flashers)

Off

Door lock buzzer

Off

Operation signal
(Buzzer)

Off

Panic function

Off

Glass hatch opening
operation

Push and hold

Push twice
6

One short push
Vehicle specifications
583

6-2. Customization

Item

Automatic
light control
system
(→P. 196)

Lights
(→P. 196)
Multi-information display
(→P. 187)

Illumination
(→P. 373)

584

Function

Default setting

Customized
setting

Light sensor sensitivity

Level 3

Level 1 to 5

Time elapsed before
headlights automatically turn off after doors
are closed

30 seconds

Ambient light level at
which instrument illumination begins to dim
(meter light etc.)

Standard

-2(darker) to
2(brighter)

Ambient light level at
which instrument illumination begins to
brighten (meter light
etc.)

Standard

-2(darker) to
2(brighter)

Off

Daytime running light
system (U.S.A. only)

0 second
60 seconds
90 seconds

French
Language selection

English

Spanish
Chinese
7.5 seconds

Time elapsed before
lights turn off

15 seconds

Operation when the
doors are unlocked

Off

Operation after the
“ENGINE START
STOP” switch or the
engine switch is turned
OFF

Off

30 seconds

6-2. Customization

Item

Outer foot
lights
(if equipped)
(→P. 373)

Default setting

Customized
setting

Operation when you
approach the vehicle
with the electronic key
on your person.

Off

Operation when the
doors are unlocked
using the wireless
remote control, key or
entry function

Off

Operation when the
doors are unlocked
using the door lock
function

Off

Time period before
lights turn off

15 seconds

Function

Lighting control

7.5 seconds
30 seconds
Off

Vehicle specifications
585

6-3. Initialization

Items to initialize
The following items must be initialized for normal system operation
in cases such as after the battery is reconnected, or maintenance is
performed on the vehicle.

Item

When to initialize

Reference

Power back door

• After reconnecting or changing the
battery
• After changing a fuse

P. 57

Tire pressure warning
system

• When changing the tire inflation
pressure by changing traveling
speed or towing trailer, etc.

P. 455

586

Reporting safety defects for U.S. owners
If you believe that your vehicle has a defect which could cause a
crash or could cause injury or death, you should immediately
inform the National Highway Traffic Safety Administration (NHTSA)
in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free:
1-800-331-4331).
If NHTSA receives similar complaints, it may open an investigation,
and if it finds that a safety defect exists in a group of vehicles, it
may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your
dealer, or Toyota Motor Sales, U.S.A., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline
toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to
http://www.safercar.gov; or write to: Administrator, NHTSA,
1200 New Jersey Ave, S.E., Washington, DC 20590. You can
also obtain other information about motor vehicle safety from
http://www.safercar.gov.

588

Seat belt instructions for Canadian owners (in French)
The following is a French explanation of seat belt instructions
extracted from the seat belt section in this manual.

See the seat belt section for more detailed seat belt instructions in
English.

Utilisation correcte des ceintures de sécurité
● Tendez la sangle diagonale de
sorte
qu'elle
couvre
complètement l'épaule, sans
entrer en contact avec le cou
ou glisser de l'épaule.
● Placez la sangle abdominale
le plus bas possible sur les
hanches.
● Réglez la position du dossier
de siège. Asseyez-vous le dos
le plus droit possible et calezvous bien dans le siège.
● Ne vrillez pas la ceinture de
sécurité.

For owners
589

Entretien et soin
■ Ceintures de sécurité
Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède.
Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont
pas effilochées, entaillées, ou ne paraissent pas exagérément usées.

ATTENTION
■ Détérioration et usure des ceintures de sécurité
Inspectez les ceintures de sécurité périodiquement. Contrôlez qu'elles ne
sont pas entaillées, effilochées, et que leurs ancrages ne sont pas
desserrés. N'utilisez pas une ceinture de sécurité défectueuse avant qu'elle
ne soit remplacée. Une ceinture de sécurité défectueuse n'apporte aucune
garantie de protection de l'occupant en cas d'accident.

590

SRS airbag instructions for Canadian owners (in French)
The following is a French explanation of SRS airbag instructions
extracted from the SRS airbag section in this manual.
See the SRS airbag section for more detailed SRS airbag instructions in English.

Sacs de sécurité gonflables frontaux
Sac de sécurité gonflable conducteur/sac de sécurité gonflable
passager avant
Participent à la protection de la tête et du thorax du conducteur
et du passager contre les chocs avec les éléments de
l'habitacle.
Sac de sécurité gonflable de genoux conducteur
Contribue à accroître la protection du conducteur.

For owners
591

Sacs de sécurité gonflables latéraux et rideau
Sacs de sécurité gonflables latéraux
Participent à la protection du thorax des occupants des sièges
avant.
Sacs de sécurité gonflables rideau
Participent principalement à la protection de la tête des
occupants assis dans les sièges des places extérieures.

592

Composition du système de sacs de sécurité gonflables

Sacs de sécurité gonflables
rideau
Sacs de sécurité gonflables
latéraux
Sac de sécurité gonflable
passager avant
Capteurs de sacs de
sécurité gonflables latéraux
et rideau

Témoin d'alerte SRS
Sac de sécurité gonflable
conducteur
Capteur de la position du
siège conducteur
Contacteur de boucle de
ceinture
de
sécurité
conducteur

Capteurs de porte

Sac de sécurité gonflable
genoux conducteur

Capteurs de sacs de
sécurité gonflables frontaux

Boîtier électronique de sacs
de sécurité gonflables

Contacteur de boucle de
ceinture
de
sécurité
passager avant

Système de détection du
passager
(calculateur
électronique et capteurs)

For owners

Capteurs de sacs de
sécurité gonflables rideau
Témoins indicateurs “AIR
BAG ON” et “AIR BAG
OFF”
593

Votre véhicule est équipé de SACS DE SÉCURITÉ GONFLABLES
INTELLIGENTS (ADVANCED AIRBAGS) conçus selon les normes
de sécurité américaines applicables aux véhicules à moteur
(FMVSS208). Le système de sacs de sécurité gonflables régule la
puissance de déploiement des sacs de sécurité gonflables
conducteur et passager avant. Le système de sac de sécurité
gonflable conducteur se compose d'un capteur de position de siège
conducteur, etc. Le système de sac de sécurité gonflable passager
avant se compose d'un capteur de classification des occupants du
siège passager avant, etc..
Les principaux éléments du système de sacs de sécurité gonflables
SRS sont illustrés ci-dessus. Le système des sacs de sécurité
gonflables SRS est commandé par un boîtier électronique. Ce boîtier
intègre un capteur de sécurité et un capteur de sac de sécurité
gonflable.
Lorsque la violence du choc frontal ou latéral l'exige, le système de
sacs de sécurité gonflables SRS déclenche les dispositifs
pyrotechniques de gonflage (générateurs de gaz). Le déploiement
rapide des sacs de sécurité gonflables est obtenu au moyen d'une
réaction chimique dans les dispositifs pyrotechniques, qui produit un
gaz inoffensif permettant d'amortir le mouvement des occupants.

594

ATTENTION
■ Précautions avec les sacs de sécurité gonflables SRS
Respectez les précautions suivantes avec les sacs de sécurité gonflables.
À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre.
● Le conducteur et tous les passagers à bord du véhicule doivent porter leur
ceinture de sécurité correctement.
Les sacs de sécurité gonflables SRS sont des dispositifs de protection
complémentaires aux ceintures de sécurité.
● Le sac de sécurité gonflable SRS conducteur se déploie avec une
violence considérable, qui peut être très dangereuse voire mortelle si le
conducteur se trouve très près du sac de sécurité gonflable. L'autorité
fédérale chargée de la sécurité routière aux États-Unis, la NHTSA
(National Highway Traffic Safety Administration) conseille:
Sachant que la zone de danger pour le sac de sécurité gonflable conducteur
se trouve dans les premiers 2 à 3 in. (50 - 75 mm) de déploiement, vous
disposez d'une marge de sécurité confortable en vous plaçant à 10 in. (250
mm) de votre sac de sécurité gonflable conducteur. Cette distance est à
mesurer entre le moyeu du volant de direction et le sternum. Si vous êtes
actuellement assis à moins de 10 in. (250 mm), vous pouvez changer votre
position de conduite de différentes façons:

595

For owners

• Reculez votre siège le plus possible, tout en continuant à pouvoir
atteindre confortablement les pédales.
• Inclinez légèrement le dossier du siège.
Bien que les véhicules puissent être différents les uns des autres, la
plupart des conducteurs peuvent s'asseoir à une distance de 10 in.
(250 mm), même avec le siège conducteur complètement avancé,
simplement en inclinant un peu le dossier de siège. Si vous avez des
difficultés à voir la route après avoir incliné votre siège, utilisez un
coussin ferme et antidérapant pour vous rehausser ou, si votre
véhicule est équipé du réglage en hauteur du siège, remontez-le.
• Si votre volant de direction est réglable, inclinez-le vers le bas. Cela a
pour effet d'orienter le sac de sécurité gonflable en direction de votre
poitrine plutôt que de votre tête et de votre cou.
Réglez votre siège selon ces recommandations de la NHTSA, tout en
conservant le contrôle des pédales, du volant de direction et la vue des
commandes du tableau de bord.

ATTENTION
■ Précautions avec les sacs de sécurité gonflables SRS
● Si vous attachez une rallonge de
ceinture de sécurité à la boucle du
siège conducteur, mais pas à la
ceinture de sécurité proprement dite, le
système de sac de sécurité gonflable
SRS conducteur pense que vous avez
attaché votre ceinture de sécurité, alors
qu'en fait c'est faux. Dans ce cas, il se
peut que le sac de sécurité gonflable
conducteur ne se déploie pas
correctement en cas d'accident, et vous
risquez d'être tué ou grièvement
blessé. Veillez donc à porter la ceinture
de sécurité avec la rallonge de ceinture
de sécurité.
● Le sac de sécurité gonflable SRS passager avant se déploie également
avec une violence considérable, qui peut être très dangereuse voire
mortelle si le passager avant se trouve très près du sac de sécurité
gonflable. Éloignez le siège passager avant au maximum du sac de
sécurité gonflable, et réglez le dossier de siège de sorte à être assis bien
droit dans le siège.
● Les nourrissons et les enfants qui ne sont pas correctement assis et/ou
protégés peuvent être grièvement blessés ou tués par le déploiement d'un
sac de sécurité gonflable. Installez dans un siège de sécurité enfant les
enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota
recommande vivement que les nourrissons et les jeunes enfants soient
installés sur le siège arrière du véhicule et convenablement attachés.
C'est à l'arrière que les nourrissons et les enfants sont les mieux protégés.
● N'installez jamais un siège de sécurité enfant type dos à la route sur le
siège passager avant, même si le témoin “AIR BAG OFF” est allumé.
En cas d'accident, par la violence et la vitesse de son déploiement, le sac
de sécurité gonflable passager avant peut blesser grièvement, voire tuer
l'enfant si vous l'avez installé à la place du passager avant dans un siège
de sécurité enfant type dos à la route.

596

ATTENTION
■ Précautions avec les sacs de sécurité gonflables SRS
● Ne pas s'asseoir sur le bord du siège et
ne pas s'appuyer contre la planche de
bord.

● Ne laissez pas un enfant rester debout
devant le sac de sécurité gonflable
SRS passager avant ou bien s'asseoir
sur les genoux du passager avant.
● Ne conduisez pas le véhicule avec
quelque chose sur les genoux, et
n'autorisez pas non plus le passager à
voyager avec quelque chose sur les
genoux.
● Ne vous appuyez pas contre la porte,
contre le rail latéral de toit ou contre les
montants avant, latéraux et arrière.

● Interdisez à quiconque de s'agenouiller
sur le siège passager en appui contre
la porte ou de sortir la tête ou les mains
à l'extérieur du véhicule.
7

For owners
597

ATTENTION
■ Précautions avec les sacs de sécurité gonflables SRS
●Ne rien fixer ou disposer sur le tableau
de bord, la garniture centrale du moyeu
de volant de direction ou la partie
inférieure de la planche de bord.
Au déploiement des sacs de sécurité
gonflables SRS conducteur, passager
avant et genoux, tout objet risque de se
transformer en projectile.
●Ne fixez aucun objet sur les portes, la
vitre de pare-brise, les vitres latérales,
les montants avant et arrière, le rail
latéral de toit et la poignée de maintien.
●Ne suspendez aux crochets à
vêtements aucun cintre nu ni aucun
objet dur. En cas de déploiement du
sac de sécurité gonflable SRS rideau,
ces objets peuvent se transformer en
projectiles capables de vous blesser
grièvement, voire de vous tuer.
●Véhicules sans système d'accès et de
démarrage “mains libres”: Évitez
d'attacher au porte-clés de la clé des
objets lourds, pointus ou très durs. Ces
objets
risquent
d'entraver
le
déploiement du sac de sécurité
gonflable SRS de genoux ou d'être
projetés vers le siège conducteur par la
force de déploiement, constituant ainsi
un danger potentiel.
● Si le cache en vinyle recouvre la partie où le sac de sécurité gonflable
SRS de genoux se déploie, veillez à l'enlever.
● N'utilisez aucun accessoire de siège venant recouvrir les zones de
déploiement des sacs de sécurité gonflables SRS latéraux, car il risquerait
d'en gêner le déploiement.
598

ATTENTION
■ Précautions avec les sacs de sécurité gonflables SRS
● Évitez de faire subir des chocs ou des pressions excessives aux zones
renfermant les composants des sacs de sécurité gonflables SRS
(oP. 593).
En effet, cela pourrait entraîner un fonctionnement anormal des sacs de
sécurité gonflables SRS.
● Ne touchez aucun composant du système immédiatement après le
déclenchement (déploiement) des sacs de sécurité gonflables SRS, car ils
sont alors encore très chauds.
● Si vous avez des difficultés à respirer après le déploiement d'un sac de
sécurité gonflable SRS, ouvrez une porte ou une vitre pour faire entrer de
l'air frais, ou bien descendez du véhicule si cela ne présente pas de
danger. Essuyez tout résidu dès que possible afin d'éviter d'éventuelles
irritations de la peau.
● Si les parties renfermant les sacs de sécurité gonflables SRS, telles que la
garniture du moyeu de volant et les garnitures de montants avant et
arrière, apparaissent abîmées ou craquelées, faites-les remplacer par
votre concessionnaire Toyota.

For owners
599

ATTENTION
■ Modification et mise au rebut des éléments du système de sacs de
sécurité gonflables SRS
Consultez impérativement votre concessionnaire Toyota si vous avez besoin
d'intervenir sur votre véhicule ou de procéder à l'une des modifications
suivantes.
Les sacs de sécurité gonflables SRS risquent de ne pas fonctionner
correctement ou de se déployer (gonfler) accidentellement, provoquant ainsi
des blessures graves, voire mortelles.
● Installation, dépose, démontage et réparations des sacs de sécurité
gonflables SRS.
● Réparation, modification, dépose ou remplacement du volant, du combiné
d'instruments, du tableau de bord, des sièges ou de leur sellerie, des
montants avant, latéraux et arrière ou des rails latéraux de toit.
● Réparations ou modifications de l'aile avant, du bouclier avant, ou du côté
de l'habitacle.
● Installation de chasse-neige, de treuils, etc. sur la calandre (pare-buffle,
pare-kangourou, etc.).
● Modifications des suspensions du véhicule.
● Installation d'appareils électroniques tels que radio émetteur/récepteur ou
lecteurs CD.
● Aménagements apportés au véhicule pour une personne atteinte d'un
handicap physique.

600

Alphabetical index

Alphabetical index
A A/C .................... 248, 255, 263, 266
ABS........................................... 211
Active head restraints............... 72
Air conditioning filter.............. 470
Air conditioning system
Air conditioning filter ............. 470
Front automatic air
conditioning system ........... 255
Front manual air
conditioning system ........... 248
Rear automatic air
conditioning system ........... 266
Rear manual air
conditioning system ........... 263
Airbags
Airbag operating
conditions........................... 123
Airbag precautions for your
child.................................... 127
Airbag warning light.............. 509
Curtain shield airbag
operating conditions........... 123
Curtain shield airbag
precautions ........................ 127
Front passenger occupant
classification system .......... 132
General airbag
precautions ........................ 127
Locations of airbags ............. 120
Modification and disposal
of airbags ........................... 131
Proper driving
posture ....................... 118, 127
Side airbag operating
conditions........................... 123
Side airbag precautions........ 127
SRS airbags ......................... 120

Alarm.........................................113
Antenna.....................................281
Anti-lock brake system............211
Armrest .....................................399
Audio input ...............................319
Audio system
Antenna.................................281
Audio input ............................319
AUX port................................319
CD player/changer ................284
iPod .......................................300
MP3/WMA disc......................292
Optimal use ...........................315
Portable music player............319
Radio.....................................277
Steering wheel audio
switch..................................321
Type ......................................273
USB memory.........................307
Automatic light control
system ....................................196
Automatic transmission ..........173
AUX port ...................................319
Auxiliary box ........................... 385

603

Alphabetical index

B Back-up lights
Replacing light bulbs .............487
Wattage.................................566
Back door
Back door ................................57
Smart key system....................33
Wireless remote control ..........46
Battery
Checking ...............................450
If the vehicle has a
discharged battery ..............540
Preparing and checking
before winter .......................231
Bluetooth® audio .....................344
Bluetooth® phone ....................340
Bottle holder.............................384
Brake assist..............................211
Brakes
Fluid ......................................449
Parking brake ........................179
Break-in tips .............................157
Brightness control
Instrument panel light
control .................................182

604

C Care
Exterior.................................. 418
Interior................................... 421
Seat belts .............................. 422
Cargo capacity ......................... 230
Cargo hooks............................. 401
CD changer............................... 284
CD player .................................. 284
Chains....................................... 231
Child restraint system
Booster seats, definition........ 139
Booster seats, installation .....144
Convertible seats,
definition ............................. 139
Convertible seats,
installation........................... 144
Front passenger occupant
classification system........... 132
Infant seats, definition ........... 139
Infant seats, installation ........ 144
Installing CRS with a top
tether straps........................ 151
Installing CRS with LATCH
anchors............................... 146
Installing CRS with seat
belts .................................... 148
Child safety
Airbag precautions ................ 127
Battery precautions ....... 452, 543
Child restraint system ........... 139
Child-protectors.......................54
How your child should wear
the seat belt ..........................88
Installing child restraints........ 144
Moon roof precautions .......... 104
Power window lock switch ......98
Power window precautions .....99
Removed key battery
precautions ......................... 475
Seat belt extender
precautions ...........................90
Seat belt precautions ..............88
Seat heater precautions........ 398

Alphabetical index

Child-protectors ........................ 54
Cleaning
Exterior ................................. 418
Interior .................................. 421
Seat belts ............................. 422
Clock ................................ 187, 391
Compass .................................. 412
Condenser ............................... 448
Console box............................. 378
Conversation mirror................ 392
Cooling system
Engine overheating .............. 544
Cruise control.......................... 204
Cup holders ............................. 380
Curtain shield airbags ............ 120
Customizable features............ 582

D Daytime running light
system ....................................198
Defogger
Rear window .........................269
Side mirrors...........................269
Dimension.................................552
Dinghy towing ..........................245
Display
Trip information .....................187
Warning message .................519
Do-it-yourself maintenance.....430
Door courtesy lights
Door courtesy lights ..............373
Wattage.................................566
Doors
Door lock .....................33, 46, 52
Door windows..........................98
Side mirrors.............................95
Downhill assist control
system ....................................218
Driver's seat belt reminder
light .........................................511
Driving
Break-in tips ..........................157
Correct posture .....................118
Procedures............................156
Winter driving tips..................231

605

Alphabetical index

E Electric power steering ...........211
Electronic key
If your electronic key
battery is discharged...........538
Emergency flashers
Switch....................................496
Emergency, in case of
If a warning message is
displayed.............................519
If the back door opener is
inoperative ............................60
If the electronic key does
not operate properly............538
If the engine will not start ......534
If the shift lever cannot be
shifted from P......................536
If the vehicle has a
discharged battery ..............540
If the warning buzzer
sounds... ............................508
If the warning light turns
on........................................508
If you have a flat tire .............520
If you lose your keys/
wireless remote control
transmitter...........................537
If you think something is
wrong ..................................504
If your vehicle becomes
stuck ...................................547
If your vehicle has to be
stopped in an
emergency ..........................549
If your vehicle needs to be
towed ..................................497
If your vehicle overheats .......544

606

Engine
Compartment ........................ 440
Engine switch................ 166, 170
Hood ..................................... 434
How to start the
engine......................... 166, 170
Identification number............. 553
If the engine will not start ...... 534
Ignition switch ............... 166, 170
Overheating ..........................544
Engine compartment cover .... 442
Engine coolant
Capacity ................................ 559
Checking ............................... 446
Preparing and checking
before winter....................... 231
Engine coolant temperature
gauge...................................... 181
Engine immobilizer system .... 110
Engine oil
Capacity ................................ 556
Checking ............................... 442
Preparing and checking
before winter....................... 231
Engine oil maintenance
data ......................................... 445
Enhanced vehicle stability
control .................................... 211
Enhanced VSC ......................... 211
EPS............................................ 211
Event data recorder ................. 506

Alphabetical index

F Floor mat.................................. 400

G Garage door opener.................406

Fluid
Brake .................................... 449
Washer ................................. 454
Fog lights
Replacing light bulbs ............ 487
Switch................................... 200
Wattage ................................ 566
Front automatic air
conditioning system............. 255
Front fog lights
Replacing light bulbs ............ 487
Switch................................... 200
Wattage ................................ 566
Front manual air
conditioning system............. 248
Front passenger occupant
classification system............ 132
Front passenger's seat belt
reminder light........................ 511
Front seats
Adjustment ............................. 71
Front side marker lights
Replacing light bulbs ............ 487
Switch................................... 196
Wattage ................................ 566
Front turn signal lights
Replacing light bulbs ............ 487
Wattage ................................ 566
Fuel
Capacity ............................... 555
Fuel gauge ........................... 181
Fuel pump shut off system ... 505
Gas station information ........ 616
Information ........................... 567
Refueling .............................. 106
Type ..................................... 555
Fuel door.................................. 106
Fuel filler door ......................... 106
Fuel pump shut off system .... 505
Fuses........................................ 476

Gas station information...........616
Gauges......................................181
Glove box..................................377
Grocery bag hooks ..................401

H Hands-free system
(for cellular phone) ................340
Hazard lights switch ................496
Head restraints
Active head restraints..............72
Adjusting ................................82
Headlights
Replacing light bulbs .............487
Switch....................................196
Wattage.................................566
Heaters
Seat heaters..........................397
Side mirror.............................269
Hood..........................................434
Hooks
Cargo hook............................401
Shopping bag ........................401
Horn...........................................180

I/M test.......................................429
Identification
Engine ...................................553
Vehicle ..................................553
Ignition switch..................166, 170
Illuminated entry system.........373
Indicator lights .........................183
Initialization
Items to initialize....................586
Inside rear view mirror ..............92
Instrument panel light
control ....................................182
Interior lights
Interior lights..........................373
Switch............................374, 375
Wattage.................................566

607

Alphabetical index

J Jack
Positioning a floor jack ..........436
Vehicle-equipped jack ...........520
Jack handle ..............................520

K Keyless entry..............................46
Keys
Electronic key..........................30
Engine switch ................166, 170
If the electronic key does
not operate properly............538
If you lose your keys/
wireless remote control
transmitter...........................537
Ignition switch................166, 170
Key number.............................30
Keyless entry...........................46
Keys ........................................30
Mechanical key .......................30
Wireless remote control
key ........................................46

L License plate lights
Replacing light bulbs .............487
Wattage.................................566
Light bulbs
Replacing ..............................487
Wattage.................................566
Lights
Door courtesy lights ..............373
Emergency flasher switch .....496
Fog light switch .....................200
Hazard light switch ................496
Headlight switch ....................196
Interior light switch ........374, 375
Outer foot lights.....................373
Personal light switch .............374
Replacing light bulbs .............487
Turn signal lever....................178
Vanity lights...........................390
Wattage.................................566

608

Load capacity........................... 230
Lock steering column...... 168, 171
Luggage cover ......................... 402

M Maintenance
Do-it-yourself
maintenance ....................... 430
General maintenance............ 426
Maintenance data ................. 552
Maintenance requirements ... 424
Meter
Instrument panel light
control................................. 182
Meters ................................... 181
Mirrors
Conversation mirror .............. 392
Inside rear view mirror ............92
Side mirror heaters ............... 269
Side mirrors.............................95
Vanity mirrors........................ 390
Moon roof ................................. 101
MP3 disc ................................... 292
Multi-information
display .................................... 187

N Noise from under vehicle..........24
O Odometer.................................. 181
Off-road precautions ............... 221
Oil
Engine oil .............................. 442
Opener
Back door................................57
Fuel filler door ....................... 106
Glass hatch .............................67
Hood ..................................... 434
Outside rear view mirrors
Adjusting and folding...............95
Outside temperature
display .................................... 187
Overhead console.................... 379
Overheating, Engine................ 544

Alphabetical index

P Parking brake .......................... 179
Parking lights
Replacing light bulbs ............ 487
Switch................................... 196
Wattage ................................ 566
Personal/interior lights
Switch................................... 374
Wattage ................................ 566
Power outlet............................. 393
Power windows ......................... 98

R Radiator.................................... 448
Radio ........................................ 277
Rear automatic air
conditioning system............. 266
Rear manual air conditioning
system ................................... 263
Rear seat
Adjustment ............................. 74
Folding down second
seatback............................... 75
Folding down third
seatback............................... 77
Removing the second
center seat ........................... 78
Stowing the second
center seat ........................... 78
Rear seat entertainment
system*
Rear turn signal lights
Replacing light bulbs ............ 487
Wattage ................................ 566
Rear view mirror
Compass .............................. 412
Rear view monitor system...... 207
Rear window defogger............ 269
Rear window wiper.................. 203

Replacing
Fuses ....................................476
Key battery ............................473
Light bulbs.............................487
Tires ......................................520
Reporting safety defects for
U.S. owners ............................588
Roof luggage carrier................229

S Seat belts
Adjusting the seat belt.............85
Automatic Locking
Retractor ...............................86
Child restraint system
installation...........................144
Cleaning and maintaining
the seat belts ......................422
Emergency Locking
Retractor ...............................86
How to wear your seat belt......85
How your child should wear
the seat belt ..........................88
Pregnant women,
proper seat belt use ..............87
Reminder light .......................511
Seat belt extenders .................88
Seat belt pretensioners ...........86
Seat heaters..............................397
Seating capacity.......................230
Seats
Adjustment ........................71, 74
Adjustment precaution ......73, 81
Child seats/child restraint
system installation ..............144
Cleaning ................................421
Head restraint..........................82
Properly sitting in the seat.....118
Seat heaters..........................397

*: Refer to the “Navigation System Owner’s Manual”

609

Alphabetical index

Service reminder
indicators ..............................183
Shift lever
Automatic transmission .........173
If the shift lever cannot
be shifted from P.................536
Shift lock system .....................536
Shopping bag hooks ...............401
Side airbags..............................120
Side marker lights
Replacing ..............................487
Switch....................................196
Wattage.................................566
Side mirrors
Adjusting and folding...............95
Side table ..................................387
Smart key system
Entry function ..........................33
Starting the engine ................166
Spare tire
Inflation pressure...................563
Storage location ....................520
Spark plug ................................560
Specifications...........................552
Speech command switch ........345
Speedometer ............................181
Steering
Column lock release......168, 171

610

Steering wheel
Adjustment ..............................91
Audio switches ...................... 321
Climate remote control
switches.............................. 272
Stop lights
Replacing light bulbs............. 487
Wattage................................. 566
Storage feature ........................ 376
Storage precautions ................ 228
Stuck
If your vehicle becomes
stuck ................................... 547
Sun visors ................................ 389
Switch
Emergency flasher switch .....496
Engine switch................ 166, 170
Fog light switch ..................... 200
Hazard light switch................ 496
Ignition switch ............... 166, 170
Light switches ....................... 196
Power door lock switch ...........53
Power window switch..............98
SNOW switch........................ 174
Window lock switch.................98
Wiper and washer
switch.......................... 201, 203

Alphabetical index

T Tachometer.............................. 181
Tail lights
Replacing light bulbs ............ 487
Switch................................... 196
Wattage ................................ 566
Talk switch............................... 345
Telephone switch .................... 345
Theft deterrent system
Alarm .................................... 113
Engine immobilizer system... 110
Theft prevention labels........... 117
Tire inflation pressure ............ 465
Tire information
Glossary ............................... 576
Size ...................................... 573
Tire identification number ..... 572
Uniform tire quality
grading ............................... 574

Tires
Chains ...................................231
Checking ...............................455
If you have a flat tire..............520
Inflation pressure...................465
Information ............................570
Replacing ..............................520
Rotating tires .........................455
Size .......................................563
Snow tires .............................231
Tire pressure warning
system ........................455, 511
Tools .........................................520
Total load capacity...................230
Towing
Dinghy towing........................245
Emergency towing.................498
Trailer towing.........................235
Traction control........................211
TRAC .........................................211
Trip information .......................187
Trip meter .................................181
Turn signal lights
Replacing light bulbs .............487
Switch....................................178
Wattage.................................566

611

Alphabetical index

V Valet key .....................................30
Vanity lights
Vanity lights...........................390
Wattage.................................566
Vanity mirrors...........................390
Vehicle identification
number ...................................553
Vehicle stability control...........211
VSC............................................211

W Warning buzzers
Brake system ........................508
Open door .............................511
Seat belt reminder.................511
Warning lights
Anti-lock brake system ..........509
Brake assist system ..............509
Brake system ........................508
Charging system ...................509
Electric power steering
system ................................509
Electronic engine control
system ................................509
Engine oil pressure ...............509
Malfunction indicator lamp ....509
Master warning light ..............511
Open door .............................511
Pretensioners ........................509
Seat belt reminder light .........511
SRS airbags ..........................509
Tire pressure warning light....511
Warning messages ..................519

612

Washer
Checking ............................... 454
Preparing and checking
before winter....................... 231
Switch ........................... 201, 203
Washing and waxing ............... 418
Weight
Cargo capacity ...................... 226
Load limits............................. 230
Weight................................... 552
Wheels ...................................... 468
Window glasses ........................98
Window lock switch...................98
Windows
Power windows .......................98
Rear window defogger .......... 269
Washer.......................... 201, 203
Windshield wiper de-icer ........ 271
Windshield wipers ................... 201
Wireless remote control key
Replacing the battery ............ 473
Wireless remote control key....46
WMA disc.................................. 292

What to do if...

What to do if...
A tire punctures

P. 520 If you have a flat tire

P. 534 If the engine will not start

The engine does not start

P. 110 Engine immobilizer system
P. 540 If the battery is discharged

The shift lever cannot be
moved out

P. 536

If the shift lever cannot be shifted
from P

The engine coolant temperature
gauge enters the red zone
P. 544 If your vehicle overheats

Steam can be seen coming
from under the hood

If you lose your keys/wireless
remote control transmitter

The key is lost

P. 537

The battery runs out

P. 540 If the battery is discharged

The doors cannot be locked

P. 52

Side doors

P. 57

Back door

The horn begins to sound

P. 113 Alarm

The vehicle is stuck in
mud or sand

P. 547 If the vehicle becomes stuck

613

What to do if...

A warning light or indicator light
comes on

P. 508

If a warning light turns on or a
warning buzzer sounds...

■Warning lights
Brake system warning
light

Low fuel level warning
light
P. 511

P. 508

Driver’s seat belt
reminder light P. 511

Front passenger’s seat belt
reminder light

Charging system warnP. 509
ing light
or
Low engine oil pressure
warning light
P. 509
Malfunction indicator
lamp

P. 511

Master warning light
P. 511

or
P. 509

SRS warning light
P. 509

Open door warning light
P. 511

614

Engine oil replacement
reminder light P. 511
Low washer fluid warning light
P. 511

What to do if...

ABS warning light

Automatic transmission fluid temperature warning light
P. 511

or
Tire pressure warning
light
P. 511

P. 509

Electric power steering
warning light
P. 509
Slip indicator
light

Cruise control indicator
light*
P. 509

P. 509

*: The light flashes to indicate a malfunction.
A warning message is
displayed

P. 519 If a warning message is displayed

615

GAS STATION INFORMATION

Auxiliary catch lever
P. 434

Hood release lever
P. 434

Fuel filler door
P. 106

Back door opener
P. 57

Fuel filler door opener
P. 106

Tire inflation pressure
P. 563

Fuel tank capacity (Reference) 19.2 gal. (72.5 L, 15.9 Imp. gal.)
Unleaded gasoline with an Octane Rating
Fuel type
of 87 (Research Octane Number 91)

Cold tire inflation
pressure

P. 563

Engine oil capacity
(Drain and refill ⎯ reference)

P. 556

Engine oil type

616

Toyota Genuine Motor Oil or equivalent
Oil grade:
P. 556
ILSAC multigrade engine oil
Recommended oil viscosity:
2.7 L 4-cylinder (1AR-FE) engine
5W-20 and 0W-20
3.5 L V6 (2GR-FE) engine
0W-20

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2013:05:08 18:57:28-04:00
Modify Date                     : 2013:05:08 18:57:28-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:05:08 18:57:28-04:00
Format                          : application/pdf
Document ID                     : uuid:1df71b63-f35d-4a96-8744-f376f0585159
Instance ID                     : uuid:60cc92f0-3248-4cc3-9128-2d5c95f81c98
Page Count                      : 615

EXIF Metadata provided by EXIF.tools

Toyota 2011 Highlander Owners Manual

Navigation menu

Versions of this User Manual:

Views

Navigation