7106507460 Archer VR400 V2 QIG
Instruction E2476931017E4A7A9C4D0622Eb6Fe9C6 instruction_e2476931017e4a7a9c4d0622eb6fe9c6 instruction_e2476931017e4a7a9c4d0622eb6fe9c6 instruction upload idei74 3:
2017-06-09
: Tp-Link 7106507460 Archer Vr400 V2 Qig 7106507460_Archer VR400_V2_QIG
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
1.Connect the Hardware Quick Installation Guide Phone Jack AC1200 Wireless VDSL/ADSL Modem Router Power Adapter Phone Cable VR400 4 1 Verify that the following LEDs turn stable before continuing with the configuration. LINE DSL Splitter 2 PHONE MODEM Phone Cable Phone (Optional) Modem Router 3 Push in to turn on the Power On modem router. DSL On Note: The DSL LED takes about 1 to 2 minutes to stabilize. If you don’t need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection. 2.Configure the Modem Router Before You Start Method 1: Via Web Browser Method 2: Via TP-Link Tether App 1. You'll usually need an internet service username and password, given to you by your internet service provider (ISP) when you first signed up with them. If you are unsure, please check with your ISP. 1. Connect your device to the router using an Ethernet cable or wirelessly. 1. Download the TP-Link Tether app. SSID (network name) and Wireless Password are on the product label at the bottom of the modem router. or Ethernet Cable 2. Find the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router. 2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a password and get started. Note: If the login page does not appear, please refer to FAQ > Q1. Scan to download 2. Connect your smartphone to the router. SSID (network name) and Wireless Password are on the product label at the bottom of the modem router. 3. Launch the Tether app and select Archer VR400. http://tplinkmodem.net New Password Low Middle Device High Confirm Password Let’s Get Started Local Device Archer VR400 50-C7-BF-02-EA-DC 3. Follow the step-by-step instructions to set up an internet connection and register the TP-Link Cloud service. Now you can enjoy your internet. 4. Follow the steps to connect to the internet and register the TP-Link Cloud service. Now you can enjoy your internet. Already have a modem? USB Applications If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below to set up. The USB port can be used for printer, file and media sharing, both locally over your home network and remotely over the internet using the router's built-in FTP server capability. 1. Connect the hardware and wait until the Power LED becomes stable. LED Indicators USB Port LED Status Indication On Flashing Off System initialization is complete. The system is initializing or the firmware is being upgraded. Do not disconnect or power off the modem router. Power is off. On Flashing Off DSL synchronization is complete. DSL synchronization is in progress. DSL synchronization failed. Internet On Off Internet connection is available. No internet connection or the modem router is operating in Bridge mode. Wireless 2.4GHz On Off The 2.4GHz wireless radio band is enabled. The 2.4GHz wireless radio band is disabled. Wireless 5GHz On Off The 5GHz wireless radio band is enabled. The 5GHz wireless radio band is disabled. LAN On Off The corresponding LAN port is connected. No LAN port is connected. USB On Flashing Off The USB device is ready to use. A new USB device is being identified. No USB device is plugged into the USB port. On/Off Turns On when a WPS synchronization is established and automatically turns Off about five minutes later. A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes. Power Power Adapter DSL Modem Modem Router Remote Access via FTP Server Media Sharing Local Storage Sharing Printer Sharing Ethernet Cable 2. Connect your device to the router via an Ethernet cable or wirelessly. SSID (network name) and Wireless Password are on the product label at the bottom of the modem router. 3. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a password for router management and get started. Note: If the login page does not appear, please refer to FAQ > Q1. http://tplinkmodem.net 4. Follow the Quick Setup and select Wireless Router Mode to connect to the internet. If there is no Operation Mode selection page in the Quick Setup, go to the Advanced > Operation Mode page and switch to Wireless Router Mode, then go to Basic > Internet to finish the set up. To learn more about the USB features, visit http://tp-link.com/app/usb or scan the QR code. Support For detailed configuration instructions and more supported features (including TP-Link Cloud service, Guest Network, Parental Controls and QoS) please refer to the User Guide available from this product's support page at www.tp-link.com. WPS Slow Flashing For technical support and other information, please visit http://www.tp-link.com/support. Now you can enjoy the internet. FAQ (Frequently Asked Questions) 7106507460 REV2.1.0 ©2017 TP-Link Q1. What should I do if I cannot access the web management page? A1. If the computer is set to a static IP address, change its settings to obtain an IP address automatically. A2. Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser. A3. Use another web browser and try again. A4. Reboot your modem router and try again. A5. Disable then enable the network adapter in use. Q2. What should I do if the DSL LED does not turn solid on? A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter. A2. Restore your modem router to its factory default settings. A3. Remove the DSL splitter, directly connect the modem router to the phone jack and follow this guide to reconfigure the modem router. A4. Contact your ISP (internet service provider) to check the status of your DSL line. A5. If the problem persists, contact our Technical Support. Q3. What should I do if I cannot access the internet? A1. Make sure all telephone and Ethernet cables are correctly and securely connected to the modem router. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net or http://192.168.1.1. If you cannot, change your computer settings to obtain an IP address automatically from the modem router. If you can, try the steps below. A3. Ask your internet service provider for the VPI/VCI (or VLAN ID), Connection Type, internet service username and password, and make sure all are correctly entered into your router's management page. A4. Restore the modem router to its factory default settings and reconfigure it by following the instructions in this guide. A5. Please contact our Technical Support if the problem persists. Q4. What should I do if I forget my password? For the web management page: A1. If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. A2. Alternatively, restore the modem router to its factory default settings and then set a new password. For the Wi-Fi network: A1. The default Wi-Fi Password/PIN can be found on the product label at the bottom of the modem router. A2. If the default wireless password has been changed, log in to the web management page and go to Basic > Wireless to retrieve or reset your password. Q5. How do I restore the modem router to its factory default settings? A1. With the modem router powered on, press and hold the Reset button on the rear panel of the modem router for approximately 8 seconds until all LEDs turn back on, then release the button. Reset Button: Press & Hold for 8 Seconds A2. Log in to the web management page of the modem router. Go to Advanced > System Tools > Backup & Restore and click Factory Restore. The modem router will restore and reboot automatically.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Creator : Metadata Date : 2017:05:09 11:08:24+08:00 Modify Date : 2017:05:09 11:08:24+08:00 Create Date : 2017:05:09 11:07:51+09:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 64 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4683 bytes, use -b option to extract) Instance ID : uuid:0c7e3e7f-8974-4f70-8f41-3b04504fc3d3 Document ID : xmp.did:2b71950c-27c3-a640-be06-ca24dd032b58 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:57800bcb-14ec-4728-bebf-52ba0783e969 Derived From Document ID : xmp.did:fda2592d-ed64-ae4a-bb90-9153d6e6f492 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:4AC8B060B8BFE311957AF4B25D46AA52, xmp.iid:2b71950c-27c3-a640-be06-ca24dd032b58 History When : 2014:04:09 18:00:15+08:00, 2017:05:09 11:07:47+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2014 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 450.000084 Max Page Size H : 326.999845 Max Page Size Unit : Millimeters Font Name : ArialMT, Helvetica, TP-LinkAktiv-Regular, TP-LinkAktiv-Light, TP-LinkAktiv-Medium, TP-LinkAktiv-Bold Font Family : Arial, Helvetica, TP-Link Aktiv, TP-Link Aktiv, TP-Link Aktiv, TP-Link Aktiv Font Face : Regular, Medium, Regular, Light, Medium, Bold Font Type : Open Type, Type 1, Open Type, Open Type, Open Type, Open Type Font Version : Version 6.87, 001.006, Version 1.000, Version 1.000, Version 1.000, Version 1.000 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, HV_.PFB; HV_.PFM, TP-LinkAktiv_Rg.ttf, TP-LinkAktiv_Lt.ttf, TP-LinkAktiv_Md.ttf, TP-LinkAktiv.ttf Plate Names : Black, TP-Link Teal (Spot), PANTONE 877 C Swatch Group Name : 默认色板组, 灰度, 鲜艳 Swatch Group Type : 0, 0, 0 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 青, C=90 M=30 Y=95 K=30, K=50, PANTONE 427 C, PANTONE 877 C, PANTONE Cool Gray 9 C, TP-Link Teal (Spot), PANTONE 8400 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, Lab, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 100.000000, 90.000000, 0.000000, 63.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 0.000000, 95.000000, 0.000000, 22.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 30.000000, 50.000000, 0.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 0.000000, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant L : 84.313728, 59.607841, 50.196079, 54.117599 Swatch Colorant A : -1, -1, 0, 0 Swatch Colorant B : -1, -1, -2, -1 Producer : Adobe PDF library 11.00 Page Count : 2 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools