TL WPA4220 KIT (UK) V1.2 Quick Installation Guide

Tl-Wpa4220T Kit (Uk) V1.2 Quick Installation Guide TL-WPA4220T KIT (UK)_V1.2_Quick Installation Guide TL-WPA4220T KIT (UK)_V1.2_Quick Installation Guide static.tp-link.com 3:

Tl-Wpa4226 Kit (Uk) V1.2 Quick Installation Guide TL-WPA4226 KIT (UK)_V1.2_Quick Installation Guide TL-WPA4226 KIT (UK)_V1.2_Quick Installation Guide static.tp-link.com 3:

Tl-Wpa4220T Kit(Uk) V1 Qig TL-WPA4220T_KIT(UK)_V1_QIG TL-WPA4220T_KIT(UK)_V1_QIG doc down_res static.tp-link.com 3:

Tl-Wpa4220(Uk) V1 Qig TL-WPA4220(UK)_V1_QIG TL-WPA4220(UK)_V1_QIG doc down_res static.tp-link.com 3:

Tl-Wpa4220Kit(Uk) V1 Qig TL-WPA4220KIT(UK)_V1_QIG TL-WPA4220KIT(UK)_V1_QIG doc down_res static.tp-link.com 3:

: Tp-Link Tl-Wpa4220 Kit (Uk) V1.2 Quick Installation Guide TL-WPA4220 KIT (UK)_V1.2_Quick Installation Guide

Open the PDF directly: View PDF .
Page Count: 2

Powerline

Quick Installation Guide

More: To add additional powerline

adapters or extenders with the default

settings, simply plug them into the wall

sockets on the same electrical circuit.

Wait until the Powerline

LED turns on.

Extender

(TL-WPA4220)

Adapter

(TL-PA4010)

Applicable to TL-WPA4220, TL-WPA4226, and their multiple-pack kits

AV600 Powerline Wi-Fi Extender

7106506157 REV4.0.6

Plug and Play

Set Up a New Wireless Network

Router

WAN LAN

1

2

3

* TL-WPA4220 KIT (European version) is used for demonstration in this QIG.

Image may differ from actual product.

Clone Your Router’s Wi-Fi Settings to the Extender (Recommended)

Note: If the Wi-Fi LED still blinks slowly for longer than 30 seconds, unplug the extender and plug

it back in, then try again. Or use “Customize the Extender’s Wi-Fi Settings” on the back instead.

If your router supports WPS, you can continue with the steps below to clone

its current Wi-Fi settings to the extender.

Tips: We recommend that you plug in the extender near your router for Wi-Fi cloning.

Press the WPS button

for 2 seconds.

1Within 2 minutes, press the

Wi-Fi Clone button for 1 second.

2Done.3

Blinks slowly for

about 10 seconds

Solid on for 5 seconds

and then blinks rapidly

WPSWAN LAN

Wireless Router

Use the default wireless network name

(SSID) and password on the provided

Wi-Fi Info Card to access the Internet.

4Enjoy!

600

Press and hold for 5 seconds to restore the extender’s settings to factory defaults.

Attention

For non-passthrough powerline device

For passthrough powerline device

Wall Outlet

Set Up a Secure Powerline Network Using the Pair Button (Recommended)

LED and Button Legend

You can create or join a secure powerline network using the Pair button on two devices at a time. The powerline network can support up to 16 powerline devices.

Tips: We recommend that you plug in the powerline devices near each other when pairing.

To create a secure powerline network: To join an existing secure powerline network:

Go to Wireless > Wireless Settings to set a new SSID.

Go to Wireless > Wireless Security to set a new Wi-Fi password.

Go to System Tools > Reboot to restart the extender.

For more information, please visit our website:

http://www.tp-link.com

5

FAQ (Frequently Asked Questions)

Q1. How do I reset my extender?

A. With the extender powered on, use a pin to press and hold the Reset button until all LEDs go off.

When the Power LED turns on and the Wi-Fi LED starts to blink rapidly, the reset process is complete.

Q2. How to troubleshoot if there is no Internet connection in my powerline

network?

A1. Make sure all adapters and extenders are on the same electrical circuit.

A2. Make sure the Powerline LEDs light up on all your adapters and extenders. If they do not, pair your

adapters and extenders again.

A3. Make sure all hardware connections are correctly and securely connected.

A4. Check if you have an Internet connection by connecting the computer directly to the modem or router.

A5. Make sure your computer’s IP address is in the same segment as your router’s.

Q3. What can I do if a successfully-paired extender does not reconnect after

it has been moved to a new location?

A1. Try another socket and make sure it is on the same electrical circuit.

A2. Try to pair it again with another adapter or extender, and make sure the Powerline LED is on before

moving it to a new location.

A3. Check for possible interference, such as washers, air conditioners or other household appliances that may be

too close to one of the powerline adapters or extenders.

Customize the Extender’s Wi-Fi

Settings (Optional)

Connect your computer to the extender wirelessly or via an Ethernet cable.

Log in with the default user name and password (admin/admin).

1

2

4

3

Login

admin

adminUser Name

Password

DESCRIPTION

BUTTON

Press and hold for 1 second to start Wi-Fi cloning.

Press and hold for 5 seconds to turn the Wi-Fi on or off.

Press and hold for 1 second to start the pairing process.

Press and hold for 10 seconds to leave the powerline network.

Reset

Pair

Wi-Fi/Wi-Fi Clone

Press the Pair button

for 1 second.

Press the Pair button for 1 second on any powerline device in the existing

powerline network.

Within 2 minutes, press the

Pair button for 1 second.

Done. 1

1 2 3 Within 2 minutes, press the

Pair button for 1 second.

Done.

2 3

Existing Powerline Network

Ethernet

Port

Powerline LED

Power LED

Ethernet LED

Pair Button

600

Wall Outlet

Power Strip

Power Strip

600

Find and download the compatible version of utility for your powerline

extender at www.tp-link.com.

Start the utility. Choose the model to be configured and click Connect.

Adapter

Wi-Fi/Wi-Fi Clone Button

Ethernet

Ports

Reset

Button

Power LED

Powerline LED

Ethernet LED

Wi-Fi LED

Pair

Button

Extender

Wireless powerline devices in your local network

Rescan

PLC Device Scan

Description | Mode NO. | IP Address | Mac Address | Connect

TL-WPA4220 Connect

11N Powerline AP 172.27.35.217 E8:94:F6:30:73:67

On

Blinking

On

Blinking

Blinking Blinking

©2016 TP-LINK

DESCRIPTIONLED STATUS

Power

Powerline

Ethernet

Wi-Fi

On/Off

Blinking

On

Off

On/Off

Blinking

Off

The device is on or off.

Once every second: Pairing is in process.

Once every 15 seconds: Power-Saving Mode is on. (Powerline adapter only)

The device is connected to the powerline network.

The device is not connected to the powerline network or is in Power-Saving

Mode.

The Ethernet port is connected or not connected.

Rapidly: The Wi-Fi is working properly.

Once every second: Wi-Fi cloning is in process.

The Wi-Fi is disabled.