7106506915_TL WR840N(EU)多机型_QIG_V1 TL WR840N(EU) V4 Quick Installation Guide

Tl-Wr840N(Eu) V3 Quick Installation Guide TL-WR840N(EU)_V3_Quick Installation Guide TL-WR840N(EU)_V3_Quick Installation Guide static.tp-link.com 3:

2017-01-10

: Tp-Link Tl-Wr840N(Eu) V4 Quick Installation Guide TL-WR840N(EU)_V4_Quick Installation Guide

Open the PDF directly: View PDF PDF.
Page Count: 2

Multi-mode Router
WPS/
RESET
2 3WAN 1 4POWER
BClick Next to start the Quick Setup. Select Standard Wireless Router and follow the step-by-step
instructions of the Quick Setup to complete the initial configuration.
Note: If you are not sure of the WAN Connection Type, please click Auto-Detect.
http://tplinkwi.net
admin
admin
Login
A
2. Configure the router using a web browser
Launch a web browser, enter http://tplinkwifi.net
or http://192.168.0.1 in the address bar. Use
admin for both username and password, and
then click Login.
Note: If the login window does not appear, please
refer to FAQ > Q1.
1. Connect your computer to the router (Wired or Wireless)
Congure the router
Wireless
Wired
Turn o the Wi-Fi on your computer and connect it to the router via an
Ethernet cable.
Connect your device to the router’s Wi-Fi using the SSID (Network
Name) and Wireless Password printed on the label at the bottom of
the router.
Power
On
Wi-Fi
On On
Internet
Connect to the power socket
Connect to the internet
Connect the power adapter to the
router and turn on the router.
Turn o the modem, and remove the
backup battery if it has one.
Turn on the modem and then wait
about 2 minutes for it to restart.
Connect the modem to the router’s WAN
port via an Ethernet cable.
If your internet connection is through an Ethernet
cable directly from the wall, instead of through a
modem, connect the Ethernet cable to the router’s
WAN port, and skip Step 1,2,3.
Meet all your needs.
Quick Installation Guide
TL-WR840N
Wireless Password/PIN:XXXXXXXX
SSID:TP-LINK_XXXX
Conrm that the following
LEDs are on and solid to
verify the hardware
connection is correct.
Modem
Router
Power adapter
©2016 TP-LINK 7106506915 REV3.2.0
Tether App
View information about clients
connected to your router
Block unwelcome users from
connecting to your network
Set up Parental Controls with
access time
Change the basic wireless
network settings
The TP-LINK Tether app provides a simple, intuitive way to access and
manage your router.
How to begin?
1. Download the TP-LINK Tether app from the Apple App Store or Google Play
Store.
2. Ensure your smart device is wirelessly connected to the home network.
3. Launch the Tether app and start managing your home network. Scan to download
Q1. What can I do if the login window does not appear?
If the computer is set to a static or fixed IP address, change the setting to obtain an IP
address and DNS server address automatically.
Verify that http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web
browser. Alternatively, enter http://192.168.1.1 in the web browser and press Enter.
Use another web browser and try again.
Reboot your router and try again.
Disable and then enable the network adapter being used.
Q2. What can I do if I cannot access internet when using Router mode?
Check if the internet is working normally by connecting a computer directly to the
modem via an Ethernet cable. If it is not, contact your Internet Service Provider.
Log in to the web management page of the router, and go to the Status page to check
whether the WAN IP address is valid or not. If it is, please run the Quick Setup again;
otherwise, recheck the hardware connection.
Reboot your router and try again.
For cable modem users, log in to the web management page of the router. Go to
Network > MAC Clone, select Clone MAC Address and click Save. Then reboot both the
modem and the router.
Q3. How do I restore the router to its factory default settings?
With the router powered on, press and hold the WPS/RESET button on the back panel of
the router until the Power LED starts blinking.
Log in to the web management page of the router. Go to System Tools > Factory Defaults,
and click Restore. The router will restore and reboot automatically.
Q4. What can I do if I forgot my web management password?
Refer to FAQ > Q3 to reset the router, and then use admin (all lowercase) for both username
and password to log in.
Q5. What can I do if I forgot my wireless network password?
The factory default Wireless Password is printed on the label of the router.
Connect a computer directly to the router via an Ethernet cable.
Log in to the router’s web
management page, and go to Wireless > Wireless Security to obtain or reset your wireless
password.
If your questions are not listed here, please refer to the product’s Support page at
www.tp-link.com.
FAQ (Frequently Asked Questions)
Repeater Mode
1. Configure
A. Place the router next to your host router and turn it on.
B. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (Network Name) and Wireless Password printed on the
label at the bottom of the router.
C. Launch a web browser and enter http://tplinkwifi.net in the address bar.
Use admin for both the username and password, and then click Login.
Note: Click
Survey
to find your host network you want to connect to, and then enter its
wireless password.
In Repeater mode, the router boosts the existing wireless coverage in
your home.
http://tplinkwi.net
admin
admin
Login
D. Click Next to start the Quick Setup. Select Repeater and follow the
step-by-step instructions of the Quick Setup to complete the initial
configuration.
The extended network shares the same SSID (network name) and password
as those of your host network.
Place the router about halfway between your host router and the Wi-Fi
“dead” zone. The location you choose must be within the range of your
existing host network.
2. Relocate
Access Point Mode
In Access Point mode, the router transforms your existing wired network
to a wireless one.
Connect to the wireless network by using the SSID (network name) and
password of the router.
Extended NetworkHost Network
DevicesHost Router Router
ClientRouterWired Router
Ethernet4Ethernet3Ethernet1Ethernet2Internet
Ethernet2Internet
A.Turn on the router.
B.Connect the router to your wired router’s Ethernet port via an Ethernet
cable as shown above.
C.Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (wireless name) and password printed on the label at the
bottom of the router.
D.Launch a web browser and enter http://tplinkwifi.net in the address bar.
Use admin for both the username and password to log in.
E. Click Next to start the Quick Setup. Select Access Point and follow the
step-by-step instructions of the Quick Setup to complete the initial
configuration.
WAN

Navigation menu