Tp Link Re210 Quick Installation Guide 7106505149_RE210(US)_QIG_V1
Re210 Qig V1 Usa RE210_QIG_V1_USA RE210_QIG_V1_USA _r static.tp-link.com 3:
Re210 Qig V1 Usa RE210_QIG_V1_USA RE210_QIG_V1_USA resources static.tp-link.com 3:
2015-06-09
: Tp-Link Tp-Link-Re210-Quick-Installation-Guide-745454 tp-link-re210-quick-installation-guide-745454 tp-link pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
LEDs (WPS) Quick Installation Guide Re se t LE D REV1.0.0 AC750 WiFi Range Extender RE210 OPTION ONE: Using a Web Browser TWO: Using WPS (Wi-Fi Protected Setup) 1 On: The Range Extender is connected to the 2.4G wireless network of your main Router/AP. Off: The Range Extender isn’t connected to your main Router/AP. (5G) On: The Range Extender is connected to the 5G wireless network of your main Router/AP. Off: The Range Extender isn’t connected to your main Router/AP. (Power) 7106505149 Two easy setup options: (2.4G) Flashing green: The Range Extender is establishing a secure connection or being configured via web page. Solid green: The Range Extender has established a secure connection, and the signal strength is adequate. Solid orange: The Range Extender has established a secure connection, but the signal strength is too strong. Solid red: The Range Extender has established a secure connection, but the signal strength is too weak. Off: No active connection. On: The Range Extender is on. Off: The Range Extender is off. Flashing: The Range Extender is initializing. Using a Web Browser 1 Power On 3 2 Connect Plug the Range Extender into a wall outlet close to your router, and wait until the Power LED is lit and solid green. Disconnect your Ethernet connection. Click the Wi-Fi icon on the system tray, select the Extender’s default wireless network name (e.g. TP-LINK_Extender_XXGHz). No password is required to connect the first time. Login Launch a web browser and type http://tplinkrepeater.net in the address field. Use admin (all lowercase) for both Username and Password to login. Not connected http://tplinkrepeater.net Connection are available Wireless Network Connection Username: admin TP-LINK_Extender_XXGHz Password: admin RE Connect automatically Connect Login Cancel r Powe √ 4 Configure Follow the Quick Setup Wizard to manually configure the Range Extender. B. Choose your region from the Region drop-down list, and click Next. A. On the Start screen, click Next. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only. Start Choose Region Wireless Settings Review Settings Start Choose Region Wireless Settings Review Settings Main Router/AP WiFi Network Name(SSID): Wi-Fi Network Name_2.4GHz: N/A Wi-Fi Network Name_5GHz: N/A Connection Status: Choose Disconnected Start Choose Region Range Extender Network (XXGHz) Range Extender WiFi Network Name(SSID): Back Please Select Your Region Wireless Settings Exit Review Settings TP-LINK_2.4GHz_XXX 00-0A-EB-74-06-06 Most Secure(WPA-PSK/WPA2-PSK) 123456789 Copy from Main Router/AP TP-LINK_2.4GHz_XXX TP-LINK_2.4GHz_XXX_EXT Customize Next √ Please select your own region to prevent illegal usage against the local law. Next D. Enter the main router’s Wi-Fi password and either choose Copy from Main Router/AP or Customize to create a new network name for the Extender. Click Next. Main Router/AP Network (2.4GHz) Main Router/AP WiFi Network Name(SSID): Main Router/AP MAC Address(BSSID): WiFi Security Option: Fill in the WiFi Password of your Main Router/AP: Start Choose Region Wireless Settings Review Settings Available Wireless Networks (2.4GHz): 24 Region: Please click Next to set up the Range Extender or click Exit to go to the Device Management Page. Exit C. Select your router’s 2.4G wireless network name (SSID) and click Next. If the SSID is hidden, select the Set SSID and MAC manually option. Next Choose Region Main Router/AP Network (5GHz) Main Router/AP WiFi Network Name(SSID): Main Router/AP MAC Address(BSSID): WiFi Security Option: Fill in the WiFi Password of your Main Router/AP: Range Extender Network (XXGHz) Range Extender WiFi Network Name(SSID): Back Wireless Settings Signal Review Settings TP-LINK_5GHz_XXX 00-0A-EB-74-06-06 Most Secure(WPA-PSK/WPA2-PSK) 123456789 Copy from Main Router/AP TP-LINK_5GHz_XXX TP-LINK_5GHz_XXX_EXT Customize Next MAC Channel 1 WPA-PSK 0C-72-2C-B3-A5-2C 1 WPA-PSK Back Rescan Start Choose Region Wireless Settings Wireless Setting Main Router/AP WiFi Network Name (2.4GHz): Main Router/AP WiFi Network Name (5GHz): Range Extender WiFi Network Name (2.4GHz): WiFi Security Option: WiFi Password: Range Extender WiFi Network Name (5GHz): WiFi Security Option: WiFi Password: Export Settings After moving to a new location, the Extender will automatically reconnect to your router in approximately one minute. If possible, try to place your Range Extender in a location where the LED is Green. Review Settings TP-LINK_2.4GHz_XXX TP-LINK_5GHz_XXX TP-LINK_2.4GHz_XXX_EXT Most Secure (WPA/WPA2-PSK) 123456789 TP-LINK_5GHz_XXX_EXT Most Secure (WPA/WPA2-PSK) 123456789 Back YourNetworkName or YourNetworkName_EXT and password YourNetworkName and password Next F. Verify your Wireless Settings and click Finish. Both 2.4G and 5G LEDs should turn on and stay solid green. 5 Relocate In general, place your WiFi Range Extender about halfway between your wireless router/AP and wireless devices. Security 00-0A-EB-74-06-06 TP-LINK_XXX Set SSID and MAC Manually E. Select your router’s 5GHz wireless network. Click Next and repeat step D. Click Next to continue. Start SSID TP-LINK_2.4GHz_XXX 5G 2.4G Ideal Range Extender Placement The Range Extender shares your router’s Wi-Fi password for both 2.4GHz and 5GHz networks, but may have different wireless network names if you customize the names during the configuration. Finish To minimize wireless interference, place your Range Extender in an open space area, away from other bluetooth devices or radioactive devices such as cordless phone, microwave, etc. Keep away from Enjoy! OPTION 2 Using WPS (Wi-Fi Protected Setup) Important: In order to use this option, your router must support WPS. 1 Power On 2 Connect A. Press the WPS button on your router/AP. Plug the Range Extender into a wall outlet close to your router, and wait until the Power LED is lit and solid green. Note: For more information about using WPS on your router, please refer to the router manufacturer's user guide. B. Immediately push the RE button on your Range Extender. The “ ” LED should change from flashing to solid, showing that WPS connection was successful. RE er Pow RE r Powe If the RE LED does not switch from blinking to a solid green, please refer to Option 1. 3 Relocate Refer to Step 5 of Option 1 to relocate your Range Extender. YourNetworkName and password YourNetworkName and password 5G 2.4G Enjoy! Ideal Range Extender Placement The Range Extender shares the same wireless network name (SSID) and wireless password as your router. Entertainment Adapter The Range Extender RE210 can be used as a wireless adapter to connect any Ethernet-enabled device, such as a Blu-ray player, game console, DVR, or smart TV, to your wireless network. Ethernet Connection First, connect the Range Extender to your Wi-Fi network following the instructions in Option 1 or Option 2, then connect an Ethernet-enabled device to the Range Extender using an Ethernet cable as shown in the diagram on the right. Smart TV Game Console Wireless Connection Desktop Laptop Smartphone Tablet Troubleshooting and Support 1 My router has no WPS button, how do I connect the Range Extender? • If the RE LED still keeps blinking, please reset the Extender and go through the configuration again. Your router does not support WPS, please use Option 1 to setup the Range Extender using a web browser. 3 2 Why does the WPS LED not change from blinking to solid green after completing Option 1? • You may have entered the wireless password of your router incorrectly during the configuration. Please login to the Extender’s web management page, and double-check your router’s wireless password. 4 • Make sure your computer is connected to the Extender’s network. What should I do when the WPS LED is on, but only one band is connected? It depends on your router capabilities, if either the 2.4G or 5G LED is not on while the Extender connected to your router/network, press the WPS button on the router and the Range Extender again to connect the other band. What do I do if I cannot access the Extender’s web management page? • Change the computer’s fixed IP address to Obtain an IP Address Automatically. 5 How do I restore the Range Extender to its factory default settings? While the Range Extender is plugged into a power outlet, press the Reset button for 5 seconds until all the LEDs flash once.
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15 Format : application/pdf Title : 7106505149_RE210(US)_QIG_V1 Metadata Date : 2014:12:18 17:54:50+08:00 Modify Date : 2014:12:18 17:54:50+08:00 Create Date : 2014:12:18 17:54:50+09:00 Creator Tool : Adobe Illustrator CC (Windows) Thumbnail Width : 256 Thumbnail Height : 148 Thumbnail Format : JPEG Thumbnail Image : (Binary data 20097 bytes, use -b option to extract) Instance ID : uuid:82574569-836c-4fd4-a91a-80a2322bf7d1 Document ID : xmp.did:0bdce7ab-5199-5d41-913e-5a31ac4ef492 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:319cdd98-3b45-46f0-8e0c-224869012db6 Derived From Document ID : xmp.did:a060cc97-d999-1a46-8632-fdbb18aef46b Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:ab54399c-e8e3-4876-a5fb-ab07eea76451, xmp.iid:0bdce7ab-5199-5d41-913e-5a31ac4ef492 History When : 2014:09:17 12:27:08-07:00, 2014:12:18 17:54:45+08:00 History Software Agent : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 10.118056 Max Page Size H : 13.385833 Max Page Size Unit : Inches Font Name : Arial-BoldMT, ArialMT, Arial-BoldItalicMT, Helvetica, Helvetica-Bold, HelveticaNeue-Thin, HelveticaNeueLT-Thin, HelveticaNeueLT-Medium, MyriadPro-BoldCond, MyriadPro-Light, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-SemiboldIt, MyriadPro-Bold Font Family : Arial, Arial, Arial, Helvetica, Helvetica, Helvetica Neue, HelveticaNeue LT 35 Thin, HelveticaNeue LT 65 Medium, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Bold, Regular, Bold Italic, Medium, Bold, 35 Thin, Regular, Regular, Bold Condensed, Light, Regular, Semibold, Semibold Italic, Bold Font Type : Open Type, Open Type, Open Type, Type 1, Type 1, Type 1, TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.08, Version 5.10, Version 5.08, 001.006, 001.007, 001.003, Version 6.1; 2002, Version 6.1; 2002, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arialbd.ttf, arial.ttf, arialbi.ttf, HV_____ (2).PFB; HV_____ (2).PFM, HVB___.PFB; HVB___.PFM, HLT__.PFB; HLT__.PFM, Helvetica LT 35 Thin.ttf, Helvetica LT 65 Medium.ttf, MyriadPro-BoldCond.otf, MyriadPro-Light.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-SemiboldIt.otf, MyriadPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 429 C Swatch Group Name : 默认色板组, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Cyan, C=0 M=0 Y=0 K=30, PANTONE 429 C, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=15, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=0, C=100 M=0 Y=0 K=0, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 53.185320, 70.989543, 11.813534, 75.896847, 0.003100, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 44.190127, 64.019221, 8.783092, 72.262144, 0.003100, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 41.632715, 60.991836, 8.703746, 70.034331, 0.003100, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 30.000001, 69.999999, 0.000000, 14.724955, 0.000000, 38.834208, 0.003100, 0.000000, 100.000000, 50.000000, 9.999100, 4.998800, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant L : 69.019600 Swatch Colorant A : -2 Swatch Colorant B : -3 Producer : Adobe PDF library 11.00 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 For : Administrator, Bounding Box : 23 -940 1616 -28 Container Version : 9 Creator Version : 17EXIF Metadata provided by EXIF.tools