Tp Link Tl Mr3020 Quick Installation Guide MR3020(A)_8.1

Tl-Mr3020 V1 Qig 1750502055 TL-MR3020_V1_QIG_1750502055 TL-MR3020_V1_QIG_1750502055 _r static.tp-link.com 3:

Tl-Mr3020 V1 Qig 7106503718 TL-MR3020_V1_QIG_7106503718 TL-MR3020_V1_QIG_7106503718 _r static.tp-link.com 3:

Tl-Mr3020 V1 Qig 7106503718 TL-MR3020_V1_QIG_7106503718 TL-MR3020_V1_QIG_7106503718 resources static.tp-link.com 3:

Tl-Mr3020 V1 Qig 1750502055 TL-MR3020_V1_QIG_1750502055 TL-MR3020_V1_QIG_1750502055 resources static.tp-link.com 3:

: Tp-Link Tp-Link-Tl-Mr3020-Quick-Installation-Guide-745416 tp-link-tl-mr3020-quick-installation-guide-745416 tp-link pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

1 Physical Description

Package Contents
Portable 3G/4G Wireless N Router

150Mbps TL-MR3020

TL-MR3020

QIG

W
PS
/R
ES
ET

TL-MR3020

3 G/4G
W IS P
AP

Quick Installation Guide

B

G

/4

Portable 3G/4G Wireless N Router

WAN/LAN

Power Adapter

USB Cable

Resource CD

Ethernet Cable

3G

US

POWER

Mode Switch

This button is used to switch the working mode of the
Router.

WPS/RESET

To use WPS function, please push the button for less
than 5 seconds, and then the WPS LED will flash; to
reset the Router, please push the button for at least 10
seconds.

Internet

WLAN

• Windows Vista
• Windows 2000
• Mac

WPS/RESET

WLAN

Flashing
Off

The following browsers are supported:
• Internet Explorer
• Safari

Flashing
Off
Solid

RJ45 Ethernet

• Windows 7
• Windows 2003
• Linux

Solid
Off
Solid

150Mbps TL-MR3020

WPS/RESET

7106503718

This port can be LAN or WAN port depending on the
working mode.

Power

The following operating systems are supported:

TL-MR3020

This port is used to connect the provided power adapter.

RJ45 Ethernet Port

Power

System Requirement

MODEL NO.

This port is used to plug a 3G/4G modem/card into.

Mini USB Port

Mini USB Port
RJ45 Ethernet Port

Mode Switch

Internet

• Windows XP
• Windows 98
• Windows Me

3G/4G USB Port

3G/4G USB Port

RJ45 Ethernet

• FireFox
• Chrome

Solid
Flashing
Off

The Router is on.
The Router is off.
The Router is connected to the Internet, but
there is no data being transferred.
The Router is transferring data.
The Router is not connected to the Internet.
Wi-Fi is enabled.
There is data being transferred through
Wi-Fi.
Wi-Fi is disabled.
The Ethernet port is connected, but there is
no data being transferred.
The Ethernet port is transferring data.
The Ethernet port is not connected.

2 Hardware Connection
3G/4G Router Mode (Default)

Standard AP Mode

WISP Client Router Mode

In this mode, the TL-MR3020 is connected to a 3G/4G USB modem

In this mode, the TL-MR3020 is wirelessly connected to the WISP

and wirelessly share the 3G/4G mobile connection to multiple users.

(Wireless Internet Service Provider) and share the Internet with
multiple users.

In this mode, the TL-MR3020 is connected to a wired network
and transforms the wired Internet access into wireless so that
multiple users can share the Internet.

Wired Network

SSID: 123

3G/4G
Mode Switch

Mode Switch
Mode Switch

NOTE: 1. TL-MR3020 can be powered by Power Adapter or laptop/PC through the USB cable.
2. TL-MR3020 will restart automatically after you turn the Mode Switch.

3 Connect to Network

Here we take Wireless Network Connection as example, please make sure your device is wirelessly enabled.

For Windows XP

For Windows 7

1

Click the icon

2

Click Refresh network list, and then select the SSID
(wireless network name) of TL-MR3020. Click Connect.

at the bottom of your desktop.

For MAC OS

1

Click the icon

2

Click refresh button
Connect.

at the bottom of your desktop.
and then select the target network. Click

1

Click the icon

2

Make sure the status of Airport is On, and then select the
SSID (network name) of TL-MR3020 and click it.

at the right top of your desktop.

NOTE: 1. The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx． (The xxxxxx is the last six characters of the Router’s MAC address.)
2. The pre-encryption of TL-MR3020 is written on the product label, please refer to it when you connect to the wireless network.

4 Router Configurations
1

Open a web browser, type 192.168.0.254 in the address field, and press Enter. At the prompt,
enter the default User Name and Password: admin. Click OK to enter the Router’s management
page.

2

After a successful login, please configure the Router according to the working mode you
choose.

NOTE: For your convenience, TL-MR3020 will keep the following two items when you switch the working mode:
1. WAN information (Internet information), such as the User name and Password of 3G/4G ISP and PPPoE, the Dynamic IP address setting, etc.
2. Wireless settings, such as SSID (Wireless Network Name), Key Type and Password.

(To be continued)

4 Router Configurations

(Continued)

3G/4G Router Mode
1 Go to Status and check the 3G/4G
status. When the 3G/4G USB Modem
is identified, go to the next step.

3 Choose the Internet Access type, and
then click Next. Here we recommend
3G/4G Only.

4 Select your Location and Mobile ISP.
Then click Next.

5 Set your wireless parameters. It’s
recommended that you edit the
following two items, and then click Next.

6 Click Reboot to make the settings
take effect.

NOTE:
2 Go to Quick Setup and click Next.
NOTE:
If you can’t find your location in the
pull-down menu, please tick “Set the
Dial Number, APN, Username and
Password manually” to manually set
them according to the information your
3G/4G ISP provides.

After the rebooting, please
reconnect to the network
according to Step 3 Connect to
Network.

WISP Client Router Mode
1 Go to Quick Setup and click Next.

b) If Dynamic IP is selected, set the MAC Clone
page and click Next.

3 Click Survey button to find the
available wireless networks.

5 The SSID and BSSID will be automatically
filled into the wireless setting figure.
Choose the Key type and fill in the
Password according to the target
wireless network.
Set the Local SSID as your local wireless
network name. Then click Next.

c) If Static IP is selected, please enter the IP
Address and Subnet Mask given by your
WISP. Then click Next.

4 Select the target wireless network and
click Connect.

6 Click the Reboot button to make your
wireless configuration take effect and
finish the Quick Setup. (You’re
recommended to go to Wireless >
Wireless Security to set up the wireless
security.)

2 Choose your WAN Connection Type and
click Next to continue. Usually we use
Dynamic IP as the WAN Connection
Type.

a) If PPPoE is selected, please enter the
User Name and Password given by
your WISP. Then click Next.

NOTE: After the rebooting, please reconnect to the network according to Step 3 Connect to Network.
If Wireless Security is enabled, you need to enter the password you’ve just set to successfully finish the connecting.

AP mode
There are four types of sub-mode under AP mode: Access Point(AP), Repeater, Bridge and Client. You can directly use its default mode Access Point without any further configuration after pluging the WAN cable into the Ethernet Port.
While, if you want to use the other three modes, please refer to the User Guide included on the resource CD for their detailed configuration.

Technical Support

Troubleshooting
T1. What should I do if I don’t know or forget my login
password?
(1) Restore the Router’s configuration to its factory default
settings. With the Router powered on, press and hold the
WPS/RESET button on the rear panel for 8 to 10 seconds
before releasing it.
(2) Use the default user name and password: admin, admin.
(3) Try to configure your Router once again by following the
previous step of this QIG.
T2. What should I do if I cannot log in the web-based
management page after I have successfully
connected the Router?
You need to configure your PC(s) to “Obtain an IP address
automatically” and “Obtain DNS server address
automatically”.
As for this, please follow the instructions below.
1) For Windows XP:
Click “Start -> Control Panel -> Network and Internet
Connections -> Network Connections”.
For Windows 7:
Click “Start -> Control Panel ->Network and Internet
-> View network status and tasks -> Change adapter
settings”.
For Windows Vista:
Click “Start -> Control Panel ->Network and Internet
-> View network status and tasks -> Manage network
connections”.

2) Right-click “Local Area Connection”, and then click “Properties”.
3) Select “Internet Protocol (TCP/IP)” in Windows XP/2000 or
“Internet Protocol Version 4 (TCP/IPv4)” in Windows Vista/7.
Then click “Properties”.
4) Select “Obtain an IP address automatically” and “Obtain DNS
server address automatically”. Then click “OK”.
T3. What should I do if I cannot get Internet access with an
identified 3G/4G USB modem?
(1) Please insert a suited SIM/UIM card into the 3G/4G USB
modem correctly.
(2) Please plug your 3G/4G USB modem directly into your PC
and disable the PIN verification via modem utility.
(3) Please verify that your Internet connection is working on
your PC.
(4) Ask your ISP for the latest dial number and APN, correct the
pre-set information manually.
T4. What should I do when the “Unknown Modem” message
displays?
(1) Please go to our website: www.tp-link.com, click the tab
“Support” and select “3G/4G USB Modem Compatibility
List”．Then please check and make sure that your 3G/4G USB
modem is on the compatibility list.
(2) If your 3G/4G USB modem is on our list but the Router shows
”Unknown Modem”, please go to our website to download
the latest firmware or bin file and upgrade the Router.

(3) If the latest firmware or bin file cannot support your modem,
please contact our technical support.
T5. How to update the firmware?
(1) We're continuously testing newly emerged 3G/4G modem
worldwide to provide the best compatibility between our
3G/4G Router and the 3G/4G USB modems. To enjoy the best
user experience, we strongly suggest that you download the
latest firmware from our website:
http://www.tp-link.com/en/support/download/
(2) Choose menu “ System Tools -> Firmware Upgrade”, and
then you can update the latest version of firmware for the
Router on the following screen.

For more troubleshooting help, go to
http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 26504400
E-mail : support@tp-link.com
Service time: 24hrs, 7days a week
Singapore
Tel: +65 62840493
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7days a week
France
Tel: +33 (0) 820 800 860 (French service)
Email: support.fr@tp-link.com
Fee: 0.118 EUR/min from France
Service time: Monday to Friday 9:00 AM
to 6:00 PM (Except French Bank holidays)
USA/Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com
Service time: 24hrs,7days a week
Malaysia
Tel: 1300 88 875465 (1300 88TPLINK)
E-mail: support.my@tp-link.com
Service time: 24 hrs a day,
7days a week
Turkey
Tel: 444 19 25（Turkish Service）
E-mail: support.tr@tp-link.com
Service time: 9:00 AM to 6:00 PM,
7days a week
Poland
Tel: +48 (0) 801 080 618 / +48 22
7217563 (if calls from mobile phone)
E-mail: support.pl@tp-link.com
Service time: Monday to Friday 9:00 AM
to 5:00 PM. GMT+1 or GMT+2
(Daylight Saving Time)
Germany/Austria
Tel :+49 1805 875465 (German Service)
+49 1805 TPLINK
E-mail: support.de@tp-link.com
Fee: 0.14 EUR/min from the German
fixed phone network and up to 0.42
EUR/min from mobile phone
Service Time: Monday to Friday 9:00 AM
to 6:00 PM. GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse

Australia & New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: support@tp-link.com.au
Service time: 24hrs, 7 days a week
UK
Tel: +44 (0) 845 147 0017
E-mail: support.uk@tp-link.com
Service time: 24hrs, 7days a week
Italy
Tel: +39 02 66987799
E-mail: support.it@tp-link.com
Service time: Monday to Friday
9:00 AM to1:00 PM, 2:00 PM to 6:00 PM
Ukraine
Tel: 0-800-505-508
E-mail: support.ua@tp-link.com
Service time: Monday to Friday
14:00 PM to 22:00 PM
Brazil
Toll Free: 0800-770-4337
(Portuguese　Service)
E-mail: suporte.br@tp-link.com
Service time: Monday to Saturday
08:00 AM to 08:00 PM
Indonesia
Tel: (+62) 021 6259 135
E-mail : support.id@tp-link.com
Service time : Monday to Friday
9:00 -12:00; 13:00 -18:00
*Except public holidays
Switzerland
Tel: +41 (0) 848 800998 (German Service)
E-mail: support.ch@tp-link.com
Fee: 4-8 Rp/min, depending on rate of
different time
Service time: Monday to Friday 9:00 AM to
6:00 PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time)
Russian Federation
Tel: 8 (499) 754-55-60
8 (800) 250-55-60
(toll-free call from any RF region)
E-mail: support.ru@tp-link.com
Service time: from 10:00 to 18:00
(Moscow time)
*Except weekends and holidays in
Russian Federation

TP-LINK TECHNOLOGIES CO., LTD.

www.tp-link.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2012:08:16 09:05:17+08:00
Create Date                     : 2012:08:02 11:22:23+08:00
Metadata Date                   : 2012:08:16 09:05:17+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : MR3020(A)_8.1
Document ID                     : uuid:b1e92581-3037-40aa-b6eb-afe5f1c117ac
Instance ID                     : uuid:26208561-021f-4fbe-a0a2-1e6ac23bec8f
Producer                        : Adobe PDF library 8.00
Page Count                      : 2
Creator                         : Adobe Illustrator CS3
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False

EXIF Metadata provided by EXIF.tools