Tp Link Tl Sc3230 Users Manual A

Tl-Sc3230 V1 Qig 7106504101 TL-SC3230_V1_QIG_7106504101 TL-SC3230_V1_QIG_7106504101 _r static.tp-link.com 3:

Tl-Sc3230N V1 Qig 7106504101 TL-SC3230N_V1_QIG_7106504101 TL-SC3230N_V1_QIG_7106504101 _r static.tp-link.com 3:

Tl-Sc3230N V1 Qig 7106504101 TL-SC3230N_V1_QIG_7106504101 TL-SC3230N_V1_QIG_7106504101 resources static.tp-link.com 3:

Tl-Sc3230 V1 Qig 7106504101 TL-SC3230_V1_QIG_7106504101 TL-SC3230_V1_QIG_7106504101 resources static.tp-link.com 3:

TL-SC3230N to the manual 5a37068b-e92f-472a-bc85-25077431b2c5

2015-01-05

: Tp-Link Tp-Link-Tl-Sc3230-Users-Manual-167325 tp-link-tl-sc3230-users-manual-167325 tp-link pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

Quick Installation Guide
Megapixel Surveillance Camera
Wireless N Megapixel Surveillance Camera
MODEL NO. TL-SC3230/TL-SC3230N
Package Contents
System Requirement
ChromeFirefoxSafari
Resource CDEthernet Cable
Power Adapter Mounting Bracket
TL-SC3230/TL-SC3230N
Megapixel Surveillance Camera
Wireless N Megapixel Surveillance Camera
QIG
TL-SC3230N
Warning Before Installation
1
Physical Description
2Hardware Connection
3
(*Internet Explore Browser is recommended.)
(*The pictures are for reference only.)
The following operating systems are supported:
The product model shown in this QIG is TL-SC3230N, as an example.
7106504101
It is recommended to mount the Camera where objects often pass,
and the direction towards the door or passage is much better, see
the illustration below:
Do not keep the Camera exposed
to direct sunlight.
Do not place the Camera in high
humidity environments such as
in a kitchen.
Do not place the Camera where
there are high temperatures
such as near an oven.
Do not place the Camera near
devices that emit radio waves,
such as mobile phones.
Connect the LAN port on Camera to the LAN Port of your
router or switch with an Ethernet cable.
Connect the power adapter cord to the Power jack.
Plug the power adapter into the power outlet.
Before proceeding, conrm that your PC is connected to your
Router and can access the Internet.
Make sure that your Router’s DHCP feature is enabled. If not,
please refer to your Router’s instruction to enable it.
Windows 2000
Windows Vista
Internet Explorer 8 or higher
Windows 2003
Windows 7
Windows XP
The following browsers are supported:
Built-in Microphone
Audio Output Jack
RESET Button
LAN Port
WPS
RESET Button
While the camera is ready, press RESET button for at least 5 seconds and
release it. The camera will be restored to default settings and reboot
again.
Button Description
LED Description
Power/
Wireless
LED
LAN LED
The camera is powered o.
The camera nishes boot-up and is ready to serve. Power on
the camera, the LED will light up and then go o to booting
process. After keeping o for several seconds, the LED will be
solid orange.
The camera has been connected to a wireless network.
No cable is linked to the camera.
Data is being transmitted or received.
Status
O
Flash Green
Flash Orange
Solid Green
Solid Orange
* The Antenna and Flash Orange status are for TL-SC3230N only.
Antenna
Micro-SD Card Slot
Lens & Focus Ring
Power Jack
Ethernet Cable
Ethernet Cable
Power/Wireless LED LAN LED
*
*
Note:
Appendix: Congure the Camera via IP Search
Software Installation
4
1
2
3
4
Access the Camera Using IP Search
5
1
2
3
4
Live video will display in the center of your web browser.
www.tp-link.com
TP-LINK TECHNOLOGIES CO., LTD.
Note:
If the information bar does not show up, please refer to
Troubleshooting
Click the icon of IP Search on the computer’s Desktop.
Click SEARCH, the main page will show up and list all
active TP-LINK camera devices. Select the camera based
on its MAC address, which can be found on its label.
When you are accessing the Camera for the rst time, a yellow
information bar will appear at the bottom of the web page.
Click the Install
button
.
Then click Install at the prompt.
Troubleshooting
* If the CD does not automatically run with the installation window
appearing, nd the CD drive in the “My Computer space and run it
directly there. For advanced settings, please refer to the User Guide on the
Resource CD.
1What can I do if the information bar does not show up?
Open an IE browser. Click Tools, then Internet options”.
Click Security -> Internet -> Custom level.... Find the
item “Download signed ActiveX controls and set to
Prompt (recommended), then click OK. Click Security ->
Local intranet -> Custom level.... Find the item
Download signed ActiveX controls and set to “Prompt”,
then click OK”.
2What can I do if I forget the login name and password?
Keep the camera powered on, then press and hold the Reset
button for more than 5 seconds. Afterwards release it, and the
camera will be restored to factory defaults after reboot. Both
the default name and password are admin.
4What can I do if the video image ickers?
Wrong power line frequency makes images icker. Make sure
the power frequency of your camera is 50 or 60Hz. If the object
is dark, the image will icker. Make the environment around
the camera brighter.
3What can I do if I can’t access the Camera?
Make sure the Power LED is solid orange. If you can’t nd the IP
address through IP Installer, please log into your router and
nd the camera’s IP address in the DHCP Client list. If this still
doesn’t work, please reset the camera.
For more details about Troubleshooting and Technical Support
contact, please log onto our Technical Support Website.
http://www.tp-link.com/en/support
The Setup Wizard will automatically pop up, then click IP
Search Software”. Click Finish to complete the setup and the icon of “IP
Search will display on the computer’s Desktop.
Click Install IP Search Software, and the IP Search
Software window will appear. Click Next to follow the
wizard steps to install the software .
Insert the provided Resource CD into your CD-ROM drive.
If you want to congure the parameters of the camera,
please click Setting on the web management page.
Enter User name and Password to log onto the
conguration page of the camera. (Default is admin /
admin)
Wireless SettingLAN Setting
2After taking the steps above, you will be prompted to
unplug the Ethernet cable to activate wireless access. And
you can select to test wireless settings or nish wireless
procedure in the following gure.
1Select the camera you want to congure and click the
WIRELESS button. Click SSID to select your wireless AP or
router and key in WEP or WPA key. Click “>> to conrm
wireless setting and then submit your settings.
2Change the login password. Tick the box and then key in a
new username and password, and click Submit button to
perform your settings accordingly. Click << button to
return to the previous page.
1Select the camera you want to congure and click the LAN
button. Modify the relative settings of the selected device.
Click << button to quit the LAN setting procedure or click
>> button to move to next page.
With IP Search, you can change the IP related parameters of wired interface and connect the camera to the wireless network quickly. Wireless
setting is for TL-SC3230N only.
Double click the selected camera and you will link to this camera
by browser (or you can click VIEW to view the live video on the
right corner of the page) .
Note:
Surveillance Manager software is provided on the CD for
you to manage the camera. For detailed instruction,
please refer to its user manual included.
Technical Support
For all other technical support, please contact us by using the following details:
UK
Singapore
Global
Tel: +86 755 26504400
E-mail: support@tp-link.com
Service time: 24hrs, 7 days a week
Tel: +65 62840493
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7 days a week
Tel: +44 (0) 845 147 0017
E-mail: support.uk@tp-link.com
Service time: 24hrs, 7days a week
Germany / Austria
Tel :+49 1805 875465 (German Service)
+49 1805 TPLINK
E-mail: support.de@tp-link.com
Fee: 0.14 EUR/min from the German
xed phone network and up to 0.42
EUR/min from mobile phone.
Service Time: Monday to Friday, 9:00 AM
to 6:00 PM, GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
USA / Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com
Service time: 24hrs, 7days a week
Malaysia
Tel: 1300 88 875465 (1300 88TPLINK)
E-mail: support.my@tp-link.com
Service time: 24hrs, 7days a week
Russian Federation
Tel: 8 (499) 754-55-60 / 8 (800) 250-55-60
(toll-free call from any RF region)
E-mail: support.ru@tp-link.com
Service time: From 10:00 to 18:00 (Moscow time)
*Except weekends and holidays in
Russian Federation
Tel: (+62 ) 021 6259 135
E-mail: support.id@tp-link.com
Service time: Monday to Friday 9:00
-12:00 ; 13:00 -18:00 (Except public
holidays)
Switzerland
Tel: +41 (0)848 800998 (German Service)
E-mail: support.ch@tp-link.com
Fee: 4-8 Rp/min, depending on rate of
dierent time
Service time: Monday to Friday 9:00 AM to
6:00 PM. GMT+ 1 or GMT+ 2 (Daylight Saving
Time)
Indonesia
Australia / New Zealand
Turkey
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: support.au@tp-link.com (Australia)
support.nz@tp-link.com (New Zealand)
Service time: 24hrs, 7 days a week
Tel: 444 19 25Turkish Service
NZ 0800 87 5465
E-mail: support.tr@tp-link.com
Service time: 9:00 AM to 6:00 PM, 7days a week
Italy
Tel: +39 0230519020
E-mail: support.it@tp-link.com
Service time: Monday to Friday,
9:00 AM to 6:00 PM, 2:00 PM to 6:00 PM
Ukraine
Tel: 0-800-505-508
E-mail: support.ua@tp-link.com
Service time: Monday to Friday
14:00 PM to 22:00 PM
Toll Free: 0800-770-4337
(Portuguese Service)
E-mail: suporte.br@tp-link.com
Service time: Monday to Saturday
08:00 AM to 08:00 PM
Brazil
Poland
Tel: +48 (0) 801 080 618 / +48 22 7217563
(if calls from mobile phone)
E-mail: support.pl@tp-link.com
Service time: Monday to Friday 9:00 AM to 5:00
PM. GMT+1 or GMT+2 (Daylight Saving Time)
For more troubleshooting help, go to www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download/
France
Tel: +33 (0) 820 800 860 (French service)
Email: support.fr @tp-link.com
Fee: 0.118 EUR/min from France
Service time: Monday to Friday 9:00 AM to
6:00 PM (Except French Bank holidays)

Navigation menu